Mini Kolesový Nakladač S Nízkym Nakladačom + Zimný Balík kúpiť použité (60 385)
Zoradiť výsledky
- Najnižšia cena Najvyššia cena
- Najnovšie inzeráty Najstaršie inzeráty
- Najkratšia vzdialenosť Najväčšia vzdialenosť
- Najnovší rok výroby Najstarší rok výroby
- Najnovšia aktualizácia Najstaršia aktualizácia
- Výrobcovia od A po Z Výrobca od Z po A
- Relevantnosť
- Najnižšia cena
- Cena
- Najvyššia cena
- Cena
- Najnovšie inzeráty
- Dátum pridania
- Najstaršie inzeráty
- Dátum pridania
- Najkratšia vzdialenosť
- Vzdialenosť
- Najväčšia vzdialenosť
- Vzdialenosť
- Najnovší rok výroby
- Rok výroby
- Najstarší rok výroby
- Rok výroby
- Najnovšia aktualizácia
- Aktualizácia
- Najstaršia aktualizácia
- Aktualizácia
- Výrobcovia od A po Z
- Výrobca
- Výrobca od Z po A
- Výrobca
- Označenie od A po Z
- Označenie
- Označenie od Z po A
- Označenie
- Model od A po Z
- Model
- Model od Z do A
- Model
- Najnižšia referencia
- referencia
- Najvyššia referencia
- referencia
- Najkratšia doba prevádzky
- Prevádzková doba
- Najdlhšia doba prevádzky
- Prevádzková doba
- relevantnosť
- relevantnosť
Malý inzerát
Dortmund
933 km
Náves s nízkym nakladacím zariadením
Meusburger3-Achs-Tele-Semi-1P. Radmul.-hydr.Rampen
Zavolať
Stav: nový, pohotovostná hmotnosť: 9 800 kg, maximálna hmotnosť nákladu: 39 200 kg, celková hmotnosť: 49 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 200 mm, šírka ložného priestoru: 2 550 mm, zavesenie: vzduch, veľkosť pneumatiky: 245/70 R 17,5, farba: sivý, prevádzková hmotnosť: 9 800 kg, Výbava: ABS, Chassis:
- Robust steel frame welded construction with front frame cranking and level loading platform, rear bevel approx. 500x100 mm
- Neck of frame 200 mm with beveled front corners
- Sloped end swan neck approx. 500 x 100 mm (ribbed anti-slip strips on outer frame in the area of the rear bevel)
- 2 king pin positions with exchangeable 2" king pin
- Outer frame fully welded as perforated external frame
- Loading platform with extendable central frame, extendable by approx. 2,000 mm, can be locked pneumatically in 500 mm increments
- Frame before and after separation with 80x80 mm step
- Reinforced frame design / point load supported at center of gravity when retracted
- No extendable load width extensions, but prepared for retrofitting (= guide tubes welded into frame)
- With excavator recess (without cover), depth approx. 220 mm, width approx. 600 mm, starting approx. after 2nd axle to vehicle end
- 1 pair wheel recesses between 1st and 2nd axle with steel covers (Körapur-coated), depth approx. 400 mm
- Underrun protection = extended end plate
- Drop leg rear supports
Ramps:
- 2 pcs. special design two-piece loading ramps with mechanical extension
- Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting (only in conjunction with electrohydraulic unit)
- Width approx. 800 mm
- Wooden decking
- Incl. ribbed anti-slip strips on ramps
- Can be secured in travel position with lashing straps
- Operated via control lever mounted at rear, RH side of chassis
- Laterally hydraulically adjustable
Floor:
- 35 mm larch wood floor with aluminum omega profiles
Landing Gears:
- Mechanical 24 t landing gears with single-side operation and load equalization
Axles, Steering, and Tyres:
- BPW air suspension axles, max. 10 t axle load each, air bellows diameter 360 mm
- S-cam brakes 300/200 mm, asbestos-free brake linings
- Automatic slack adjusters
- Lift and lower system, total travel approx. 200 mm
- 2nd driving height via ball valve +50 mm
- 1st axle lift axle (wired via EBS), activation fully automatic with emergency operation by push button on trailer
- 3rd axle as friction-steered trailing axle with electric and mechanical lock
- 12 steel disc wheels, 10-hole, centered offset mounting
- 12 tyres size 245/70 R 17.5 143/141J, tubeless
- Incl. tire pressure monitoring system
Accessories:
- Plug-in side and rear walls on swan neck, approx. 400 mm high
- Spare wheel holder
- Lateral aluminum underrun protection
- 4 wheel chocks
- 1 plug-in ECE rear panel
- 11 pairs ZK-modules 10t each, on sides:
- 2x on swan neck
Gusdpjxgm S Defx Ap Doc
- 2x on platform before extension
- 7x after extension
- Extendable warning boards incl. 3 position lamps each, mounted at front landing gears and rear before end plate, steplessly extendable to platform width of 4,500 mm
- 4 mounting slots for warning boards in stake pockets on load platform
- 6 pairs of side stake pockets for 100x50 mm plug-in stakes
- 2 transverse stake pocket rows for 100x50 mm stakes across swan neck from outer frame to main frame (1 before and 1 after king pin positions)
- 3 transverse stake pocket rows for 100x50 mm stakes across load platform from outer frame to main frame (1 before extension, 1 after extension, 1 after 3rd axle)
- 2 pairs of steel plates in loading platform for container locks to fit 1x 20ft container
- Rubber skirt fitted to underrun protection
Malý inzerát
Dortmund
933 km
Náves s nízkym nakladacím zariadením
FaymonvilleMAX Trailer 3-Achs-Tele-Semi-Radmu.-Ram.
Zavolať
Stav: nový, pohotovostná hmotnosť: 11 000 kg, maximálna hmotnosť nákladu: 38 500 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Neck (Gooseneck):
- Gooseneck with rear chamfer approx. 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- 30 mm thick hardwood flooring
Loading Platform:
- Telescopic loading platform with rear chamfer approx. 1,000 mm x 8°
- 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm
- Wheel recesses with 15 x 15 mm square climbing strips and widenings in the lower area
- Between the 1st and 2nd axle a pair of fixed wheel recesses with cover, approx. 1,610 x 970 x 400 mm
- Recess in the chamfer and protruding into the loading platform for the reception of an excavator dipper stick approx. 2,900 x 750 x 210/290 mm
- 1 pair of horizontal lashing rings at the front of the platform (LC 10,000 daN)
- 5 pairs of fold-out lashing rings (LC 5,000 daN)
- 2 pairs of fold-out lashing rings (LC 10,000 daN)
Gusdpfxjup U Hze Ap Doc
- 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN)
- Cutouts in the outer frame of the platform for securing straps (LC 2,000 daN)
- incl. 3-piece removable galvanized covers over the wheel recesses – max. point load 3.5 t / each
Two-Part Steel Ramps:
- One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood planking
- Ramp with hydraulically folding ramp sections, hydraulic lifting system, and hydraulically adjustable position
Axles and Tyres:
- BPW axles and suspension, 2 axles fixed, 1 axle self-steering
- Technical axle load: 12,000 kg
- Electromagnetic reverse lock, operable via reverse gear and manually
- Air suspension with lifting and lowering valve
- Axle tools
- Tyres 235/75 R 17.5
- TPMS tire pressure monitoring system according to ECE R 141
Accessories included:
- On the gooseneck and at the rear, left and right, each with a mount for warning signs including socket
- One spare wheel
- 2" king pin
- One galvanized steel front wall approx. 400 mm high
- Front galvanized connection rail with yellow-red air couplings
- 4 wheel chocks
- Galvanized extendable widenings, approx. 230 mm each side
- Galvanized folding supports under the platform chamfer
- One holder for a revolving beacon at the rear of the trailer
- Cover plates to bridge the gap between ramps and platform
- White reflector tape on sides and extension; rear in red, per EU regulations
- Electro-hydraulic unit at the rear under the platform
- Controls for ramps mounted on the right side of the trailer
- European reflective warning signs (red-yellow) at the rear of the trailer
- Four approx. 400 mm extendable warning panels, approx. 423 x 423 mm, each with a position light
- Mount for revolving beacon on the warning panels
- Aluminium plug-in drop sides and rear wall on the gooseneck, approx. 2,440 x 400 mm
- Removable rear galvanized stanchions (body length approx. 2,560 mm)
- 2 pairs of WADER container locks recessed into the platform for one 20ft or 30ft container
- 3 pairs of stanchion pockets 100 x 50 mm on the outer frame of the platform
- One removable galvanized intermediate table with 1 pair of WADER container locks
- 20 x 20 mm square climbing strips every 200 mm on the outer frame of the platform chamfer
- Painted sand layer on the tread plates on the gooseneck and the loading platform as anti-slip coating
- 80 km/h speed stickers at the rear and both sides
- Load manometer for determining the axle loads, including load diagram
Malý inzerát
Dortmund
933 km
Náves s nízkym nakladacím zariadením
Meusburger3-Achs-Semi 2P. Radmul.-Federhebewerkra.
Zavolať
Stav: nový, pohotovostná hmotnosť: 8 950 kg, maximálna hmotnosť nákladu: 40 050 kg, celková hmotnosť: 49 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 200 mm, šírka ložného priestoru: 2 550 mm, veľkosť pneumatiky: 245/70 R 17,5, farba: sivý, prevádzková hmotnosť: 8 950 kg, Výbava: ABS, Chassis:
- Robust welded steel frame construction with front frame cranking and flat load area with rear taper approx. 500x100 mm
- Neck section 200 mm with chamfered corners
- Tapered end of gooseneck approx. 500 x 100 mm (traction ribs on the outer frame in the area of the rear taper)
- 2 king pin positions with exchangeable 2” king pin
- Outer frame closed outward as punched external frame for lashing with tension belts
- Reinforced frame design / point load at the centre of gravity
- Provisions for extendable loading platform wideners
- With excavator well, depth approx. 220 mm, width approx. 600 mm, beginning approx. after 2nd axle to end of vehicle
- 1 pair of wheel recesses in front of axle with steel covers (covers with Körapur coating), depth approx. 400 mm, and 1 pair of wheel recesses between 1st and 2nd axle with steel covers
- Underrun protection = extended final plate
- Drop-down rear support legs
Ramps:
- 2 single-piece aluminium drive-on ramps, spring-assisted
- Length x width approx. 2,500 mm x 600 mm
- Can be secured with tensioning straps for driving position
- Manually adjustable sideways
Gsdpfx Apjwu Agio Douc
Floor:
- 35 mm larch wood floor with aluminium omega profiles
Landing Legs:
- Mechanical 24t landing legs with single-side operation and push-pull equalizer
Axles, Steering, and Tyres:
- BPW air-suspended axles, each with 10t axle load, airbag diameter 360 mm
- S-cam brakes 300/200 mm, asbestos-free brake linings
- Automatic slack adjusters
- Lifting/lowering device with total lift approx. 200 mm
- 2nd drive position via ball valve +50 mm
- 1st axle lift axle (wired via EBS), fully automatic activation, with mechanical emergency operation via button on trailer
- 3rd axle as friction-steered trailing axle with electric and mechanical lock
- 12 steel disc wheels, 10-hole, mid-centered offset
- 12 tyres 245/70 R 17.5 143/141J, tubeless
- Includes tyre pressure monitoring
Brake System:
- Dual-circuit brake with EBS-E including RSS
- EBS (WABCO 4S3M)
- Spring-type parking brake
- Air connections yellow / red
Paintwork:
- Steel shot blasting, spray galvanizing of the chassis and priming
- Chassis/wheel hubs/outer frame painted in DB 7350 Novagrau
- Plastic parts black, unpainted
- Rims: factory silver
- Conspicuity tape on sides and rear in yellow
Accessories:
- Removable side and rear walls on gooseneck approx. 400 mm high
- Spare wheel holder
- Aluminium bump stop
- 4 chocks
- Sheet metal fenders with Clear-Pass
- Elongated license plate holder on end plate
- 1 ECE plate at the rear, plug-in
- 11 pairs ZK modules 10t lateral:
- 2x on gooseneck
- 9x on load platform
- Without rear towing eyelets
- Extendable warning signs incl. 3 position lamps each, mounted at landing legs in front and behind, steplessly extendable to 4,500 mm loading width
- 4 holders for warning signs, insertable in stake pockets on loading platform
- 6 pairs of lateral stake pockets for 100x50 mm stakes
- 2 rows of stake pockets for 100x50 mm stakes on gooseneck from outer frame to main frame (1x before and 1x after king pin positions)
- 3 rows of stake pockets for 100x50 mm stakes on loading platform from outer frame to main frame (1x front, 1x before 1st axle, 1x after 3rd axle)
- 2 pairs of steel plates in load area for container locks to carry 1x 20ft container
- Rubber skirt mounted on underrun protection
Malý inzerát
Dortmund
933 km
Náves s nízkym nakladacím zariadením
FaymonvilleMT 6-2+4-Achs-Tiefbett-Kombination
Zavolať
Stav: nový, pohotovostná hmotnosť: 29 600 kg, maximálna hmotnosť nákladu: 72 400 kg, celková hmotnosť: 102 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 6 650 mm, šírka ložného priestoru: 2 840 mm, výška ložného priestoru: 550 mm, veľkosť pneumatiky: 285/70 R19.5, farba: sivý, prevádzková hmotnosť: 29 600 kg, Výbava: ABS, Gooseneck:
- Hydraulically liftable/lowerable and detachable gooseneck
- Length approx. 3,650 mm
- For tractor units: 6 x 4 or 8 x 4
2-Axle Front Bogie:
- Hook couplings front and rear
- Chassis length x width approx. 2,200 mm x 2,850 mm
Excavator Deck “BB-A”:
- Telescopic excavator deck “BB-A” with drive-over deck hooks at the front and pin & lug coupling at the rear
- Length x base width approx. 6,650 mm x 2,850 mm
- Beam height x beam width approx. 400 mm x 1,350 mm
- Loading height 550 mm with 150 mm ground clearance
4-Axle Rear Bogie:
- Mechanical pin & lug coupling at the front for attaching a lowbed, end cross-member at the rear
- Chassis length x width approx. 5,480 mm x 2,850 mm
- Extensive lashing positions
Pendulum Axle and Tyres (front and rear chassis):
- “PENDULUM AXLE”, all axles hydro-mechanically forced steered
- Burst protection valve on axle compensation cylinder with automatic reset function
- Hydraulic cylinders with shut-off valves and locking pins to secure in lifted position
- Final axle coating with 2 coats of 2K paint, single colour in MB 7350 Novagrau
- Technical axle load: 12,000 kg
- Hydraulic axle balancing
- Tyres: 285/70 R19.5
Follow Steering:
- Remote steering from front and rear via cable remote control with push buttons, including single-track steering monitoring
- Socket on gooseneck for steering control
- Cable remote with push buttons and single-track control included
Accessories included:
- Galvanised connection bar at the front with yellow/red air couplings
- Steel front wall approx. 400 mm high
- 4 wheel chocks
- 3.5" king pin
- One 7-pin socket left and right at the rear of the gooseneck for warning panel
- A-frame with winch for spare wheel at front end of gooseneck
- Truck hydraulic connection with flow regulator (40 l/min), including bracket for supply line suspension; tractor fuel tank must be at least 80 litres, incl. couplers
- Detachable ALU side walls and rear board on gooseneck, approx. 400 mm high, anodised
- Control lever on gooseneck protected by a foldable cover
- Separate air connection with blow gun on gooseneck
- BEKAMAX central lubrication system, 1x on gooseneck, 1x on 2-axle bogie, 1x on 4-axle bogie
- Variomax tool kit
- Multi-coupler hydraulic connections on gooseneck and at lowbed hook bracket
- 2 spare wheels
- One 7-pin socket left and right, front and rear on rear chassis for warning panel
- Front chassis with separate air connection for pneumatic screwdriver
- Folding widening extenders with steel panels, width adjustable from approx. 2,850 mm to 3,250 mm
- Steel panels can be positioned in two places to create a lowered loading platform
- Steel panels with approx. 12 mm rubber floor covering
- Threaded bushings (⌀ 40 mm) spaced approx. every 500 mm on the outer flange of the excavator deck for lashing rings
- One locking position approx. every 500 mm on the extension with mechanical locking
- Socket on rear chassis for cable remote control steering
- 2 reversing lights on rear panel
Godpewcmhajfx Ap Dsuc
- Four warning panels, extendable by approx. 2,000 mm each, approx. 423 x 423 mm, with position light
- 1 work lamp left + right on rear panel of gooseneck, separately switchable
- Two INOX toolboxes, approx. 855 x 340 x 390 mm
- 1-cylinder Hatz diesel engine (Silent Pack)
- Radio remote control for follow steering
Malý inzerát
Dortmund
933 km
Náves s nízkym nakladacím zariadením
FaymonvilleMAX Trailer 3-A-S-hyd.Ladebo.-hyd.Rampen
Zavolať
Stav: nový, pohotovostná hmotnosť: 10 300 kg, maximálna hmotnosť nákladu: 39 200 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17.5, farba: sivý, Výbava: ABS, Gooseneck:
- Gooseneck with rear bevel approx. 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- 30 mm thick hardwood flooring
Loading Platform:
- Loading platform hydraulically liftable and lowerable after the gooseneck, length approx. 2,800 mm, with rear bevel approx. 1,000 mm x 8°
- Cut-outs in the outer frame for lashing straps (LC 2,000 daN)
- Approx. 48 mm thick hardwood flooring, checker plate flooring above the axles
Two-part Steel Ramps:
- One pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering
- Ramps with hydraulically folding and unfolding ramp sections, hydraulic lifting mechanism, and hydraulically adjustable
- Maximum load per pair: 40,000 kg
Axles, Suspension & Tires:
- BPW axles and suspension, 2 rigid axles, 1 trailing steering axle
- Technical axle load: 12,000 kg
- Electromagnetic reverse lock, activated via reverse gear and manually
- Air suspension with lift and lower valve
- Axle tools
- Tyres 235/75 R 17.5 3PMSF
- TPMS tire pressure monitoring system according to ECE R 141
Included Accessories:
- One spare wheel with holder in front of front wall
- 2" kingpin
- Galvanized steel front wall, approx. 400 mm high
- Yellow-red air couplings on galvanized front connector rail
- 4 wheel chocks
- Galvanized folding supports under the rear slope of the loading platform
- Bracket for beacon at the rear of the trailer
- Cover plates for bridging the gap between ramps and platform
- White reflective tape according to EU regulations on the trailer sides, and red at the rear
- Electro-hydraulic unit at the rear under the loading platform
- On the gooseneck and ramps left and right, each a bracket for warning signs, incl. socket
- Control valves for ramps fitted on the right side of the trailer
- European reflective plates (red-yellow) at the rear of the trailer
- Manual and description on USB stick
- On the gooseneck, plug-in ALU side walls and rear wall approx. 2,440 x 400 mm
- Rear galvanized stake pockets are removable (body length approx. 2,560 mm)
- An electric winch with radio remote control, approx. 5,400 kg lifting force, incl. 9.5 mm steel cable, 24 m long, with cable guide roller
- Bolted 5t ring for rope winch cable diversion on the neck without guide pulley
- 2 pairs of WADER container pockets in the platform for a 20ft container
- 6 pairs of stake pockets (100 x 50 mm) in the outer frame of the loading platform
- Lift axle on front axle, controlled by TEBS E, depending on current axle load and loading condition
- 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN)
- 1 pair of recessed lashing rings at the rear bevel along the central beam (LC 10,000 daN)
- Non-slip sand coating applied on the checker plates on the gooseneck and platform
- Central lubrication system BEKAMAX (Pico) with general-purpose grease NLGI-2 and removable pump guard
Gsdpfju Hp Hrex Ap Djuc
- Four extendable warning signs, approx. 400 mm, each 423 x 423 mm
- Speed restriction stickers 80 km/h on the rear and both sides
- Load pressure gauge for determining axle loads, incl. load diagram
- HRM metallization (High Resistance Metallisation) of the outer frame
- Complete steel structure shot-blasted, then defined visible surfaces finished with ZINACOR 850 (zinc 85% - aluminium 15%) hot metallization
Malý inzerát
Dortmund
933 km
Náves s nízkym nakladacím zariadením
Faymonville3-Achs-Semi-hydr.Ladeboden-Rampen-Gitter
Zavolať
Stav: nový, pohotovostná hmotnosť: 10 900 kg, maximálna hmotnosť nákladu: 37 100 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 890 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17.5, farba: sivý, prevádzková hmotnosť: 10 900 kg, Výbava: ABS, Gooseneck:
- Gooseneck in SNT design for optimizing the loading platform length, approx. 3,700 mm long, rear chamfer approx. 1,000 mm x 6°
- Technical fifth wheel load: 18,000 kg
- For tractor units: 4 x 2 and 6 x 2
Loading Platform:
- Loading platform approx. 9,600 mm long with rear chamfer approx. 900 mm x 6°
- Platform behind gooseneck hydraulically liftable/lowerable, approx. 3,000 mm long, load capacity up to approx. 9,000 kg
- Grating and 5 mm steel plate reinforcement on the chamfered section as additional strengthening
Ramps:
- One pair of two-piece AXS steel ramps, approx. 4,675 mm long, 900 mm wide
- Grating surface
- Hydraulically foldable ramp tips
Gjdpfouadk Njx Ap Djuc
- Ramps can be hydraulically shifted individually approx. 235 mm outwards and approx. 365 mm inwards
- Painted anti-slip sand-coating on ramp outer frame and ramp tip
- Flashing lights mounted on ramp tips with switch next to ramp control panel
- Quick-release ramp locks for securing in transport position
Axles, Suspension, and Tyres:
- BPW axles and suspension, 1st and 2nd axles fixed, 3rd axle self-steering
- 1st axle with starting aid
- Operated via brake pedal of the tractor unit
- Technical axle load: 12,000 kg
- Air suspension with raise/lower valve
- 235/75 R 17.5
- TPMS (Tyre Pressure Monitoring System) to ECE R 141 specification
- TPMS sensors fitted in all wheels, including spares
Braking System:
- WABCO EBS-E braking system complying with EU regulations
Paintwork:
- Trailer MB 7350 Nova Grey
Included Accessories:
- Pin-type steel front wall, approx. 400 mm high
- 3 kW electro-hydraulic power unit for hydraulic operations (excluding hydraulic winches)
- Gooseneck guide plate for fifth wheel, approx. 500 mm wide
- JOST Modul B landing gear - static test load = 50,000 kg
- Continuous grating with 5 mm steel baseplate as additional reinforcement
- Painted sand-coating
- Cut-outs in outer frame of platform and lift bed for attaching hydraulic ramp control valves on right side of trailer
- 2" king pin
- Central lubricating system with 1 pump, brand BEKAMAX
- On gooseneck: 1 pair removable ALU side walls, approx. 400 mm high, anodized
- Electric cable winch, approx. 5,400 kg pulling force, with radio remote control
- Steel cable approx. 24 m long, diameter approx. 9.5 mm, incl. cable pressure roller
- WABCO Smart Board system
- 4 extendable warning boards, approx. 423 x 423 mm, extendable by approx. 400 mm
Malý inzerát
Dortmund
933 km
Náves s nízkym nakladacím zariadením
FaymonvilleMAX Trailer 3-Achs-Tiefbett mit Pendelachsen
Zavolať
Stav: nový, pohotovostná hmotnosť: 17 500 kg, maximálna hmotnosť nákladu: 43 500 kg, celková hmotnosť: 61 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 7 550 mm, šírka ložného priestoru: 2 750 mm, výška ložného priestoru: 400 mm, veľkosť pneumatiky: 245/70 R 17.5, farba: sivý, Výbava: ABS, Neck (Gooseneck):
- Gooseneck in SNT design for optimizing loading platform length, approx. 3,750 mm long
- Gooseneck hydraulically liftable/lowerable and detachable
- For tractor units: 6x4 or 8x4
Deck (Lowbed):
- Lowbed with external beams, extendable design, "SUPER LOW" type, approx. 7,550 mm long
- Lowbed with fixed hardwood floor, approx. 40 mm thick, with mechanical locking
- Service lines protected and routed within the extendable beams, automatically adjusting to the respective lowbed length
Gsdpfx Ash Hm Thep Dsuc
Rear chassis:
- Rear chassis with closed outer frame, checker plate surface, and continuous prism excavator trough, approx. 1,450/900 x 505 mm, open at the rear
- 2 pairs of stake pockets (100 x 50 mm) on the outer frame for plug-in stakes
Axles and tires:
- "PENDULUM AXLE", all axles forced-steered hydromechanically
- Burst pipe valve to axle compensation cylinder with automatic RESET function
- Hydraulic cylinders with shut-off valves and plug pin for securing in raised position
- Technical axle load: 12,000 kg
- Hydraulic axle compensation
- Tires 245/70 R 17.5 / 3PMSF
Accessories included:
- Prepared for mounted container locks for 1x 20ft or 1x 40ft container on outer beams
- 2" king pin
- One galvanized steel front wall, approx. 400 mm high
- One spare wheel with holder
- Yellow-red air couplings on the galvanized front connector strip
- 4 wheel chocks
- Remote steering front and rear operated by wire remote control via pushbuttons, with single-track axle alignment control
- Hydraulic couplings between gooseneck and lowbed as multi-coupling instead of screw type
- Electro-hydraulic power pack
- White reflective tape as per EU regulations on the sides, at the extension and red on the rear
- 2 wooden blocks 500x250x200 mm
- European reflective warning panels (red-yellow) at trailer rear
- On gooseneck and rear section: holders for warning signs with sockets left and right
- Central lubrication system with 2 BEKAMAX (Pico) pumps, standard grease NLGI-2
- Load gauge to determine axle loads, incl. load chart
- On gooseneck, plug-in aluminum side walls and rear wall approx. 2,000 x 400 mm
- Rear galvanized plug-in stakes removable (body length approx. 2,120 mm)
- Separate air connection with air gun on the gooseneck
- Duomatic air coupling from gooseneck to lowbed
- Gooseneck closed at rear upper section with removable cover
- 1 pair of steel ramps for bridging the lowbed receptacle hooks
- Four approx. 400 mm extendable warning signs, approx. 423 x 423 mm
- Radio remote control for rear steering in addition to cable remote, with receiver indicator lights for single-track alignment
- 6 pairs threaded blocks between lashing rings under top chord on outer beam for installation of screwable RUD rings VLBG-4
- 7 pairs of stake pockets (100 x 50 mm) in outer frame of load platform
- Folding extensions, approx. 230 mm per side
- Anti-slip sand coating painted on load platform
- Dipper stick trough at front and rear of rear chassis closed with plug-in plates
- HRM Metallization (High Resistance Metallization) of the outer frame
- Complete steel construction shot-blasted, then defined visible surfaces metallized with ZINACOR 850 (Zinc 85% - Alu 15%) by hot finishing
Malý inzerát
Dortmund
933 km
Náves s nízkym nakladacím zariadením
FaymonvilleMAX Trailer 4-Achs-Tele-Semi-Rampen-nlla
Zavolať
Stav: nový, maximálna hmotnosť nákladu: 49 000 kg, celková hmotnosť: 60 800 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 r 17.5, farba: sivý, Výbava: ABS, Gooseneck:
- Gooseneck with chamfered front corners at 45° and rear chamfer of approx. 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- 30 mm thick hardwood flooring
Extendable Loading Area:
- Extendable loading area with rear chamfer of approx. 1,000 mm x 8°
- 5 pairs of fold-out lashing rings on the outside (LC 5,000 daN)
- 3 pairs of fold-out lashing rings on the outside (LC 10,000 daN)
- 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN)
- Cut-outs in the external frame of the loading area for attaching tie-down straps (LC 2,000 daN)
- Approx. 48 mm thick hardwood flooring, with chequered plate covering over the axles
Detachable Two-Part Ramps:
- One pair of galvanized, two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood overlay
- Ramps with hydraulically folding ramp sections, hydraulic lift and hydraulically adjustable side shift
- Max. load per pair: 40,000 kg
Landing Legs:
- JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load)
Axles and Tyres:
- BPW axles, two rigid axles, two self-steering axles, air-suspended, with drum brakes, lifting/lowering function
- The self-steering axles can be locked via electromagnetic reverse lock through reverse gear or manually
- Axle tools
- Tyres: 235/75 R 17.5
Brake System:
- Brake system in accordance with EU regulations with EBS-E (4S3M)
Steel Construction:
- Steel construction made from high-strength fine-grain steels
- Steel grades:
Gujdpfx Apoh Etf Re Dec
- S355J2+N/S355MC (yield strength 355 MPa)
- S690QL/S700MC (yield strength 690 MPa)
Paintwork:
- Premium and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc-rich primer
- High-quality 2-component (2K) topcoat in single-tone Novagrey
Electrical System:
- Electrical system according to EU regulations, ASPÖCK-NORDIK (ASS3) 24 Volt lighting
- ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets
Included Accessories:
- 2" king pin
- One galvanized steel front wall, approx. 400 mm high
- One spare wheel with holder in front of the front wall
- Yellow and red air couplings on galvanized front terminal strip
- 4 wheel chocks with holder on the front wall
- Mounting at the rear of the gooseneck for ALU approach ramps
- Galvanized folding supports under the chamfered loading area
- Bracket for a rotating beacon
- Cover plates to bridge the gap between ramps and loading area
- White reflective tape according to EU regulations on the sides, red at the rear and on the extension
- Electro-hydraulic power unit
- At the gooseneck and on the ramps, left and right, each with mounting for warning panels including socket
- Control valves for the ramps mounted on the right side of the semi-trailer
- Mudflap at the rear of the trailer
- User manual and description on USB stick
- Removable ALU side boards and rear panel on the gooseneck, approx. 2,440 x 400 mm
- Rear galvanized stanchions removable (body length approx. 2,560 mm)
- 4 pairs of WADER container pockets in the loading area for a 20 ft, 2x 20 ft or a 40 ft container
- 7 pairs of stake pockets for 100 x 50 mm stakes in the external frame of the loading area
- Extensions, galvanized, retractable by approx. 230 mm per side
- Lift axle on the front axle with control
- 20 x 20 mm square climbing strips
- BEKAMAX central lubrication system
- Four warning panels extendable by approx. 400 mm (approx. 423 x 423 mm)
Malý inzerát
Dortmund
933 km
Náves s nízkym nakladacím zariadením
FaymonvilleMAX Trailer 2-Achs-Tiefbett mit Pendelachsen
Zavolať
Stav: nový, pohotovostná hmotnosť: 12 900 kg, maximálna hmotnosť nákladu: 34 100 kg, celková hmotnosť: 47 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 850 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 350 mm, zavesenie: iný, veľkosť pneumatiky: 245/70 R 17,5, farba: sivý, prevádzková hmotnosť: 12 900 kg, Výbava: ABS, Gooseneck:
- Gooseneck in SNT design for optimized loading platform length, approx. 3,750 mm
- Gooseneck hydraulically liftable/lowerable and removable
- Technical fifth wheel load: 23,000 kg
- Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4
Loading Platform:
- Low bed with external beams, extendable “SUPER LOW” design, approx. 6,850 mm long
- Low bed with fixed hardwood floor approx. 40 mm thick and mechanical locking
Rear Chassis:
- Rear chassis with closed outer frame, chequer plate covering, and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear
- 2 pairs of lashing rings foldable outwards
- 1 pair of lashing rings mounted flat in the trough
- 2 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame
Pendulum Axle and Tyres:
- “PENDEL-AXLE”, all axles hydromechanically forced-steered
- Burst protection valve on the axle compensation cylinder with automatic RESET function
- Hydraulic cylinders with shut-off valves and pre-inserts for securing in raised position
- Axles finished with two layers of single-colour 2K paint in "FAY-Grey-34-0260"
- Technical axle load: 12,000 kg
- Hydraulic axle compensation
- Tyres 245/70 R 17.5
- TPMS tyre pressure monitoring system according to ECE R 141
Accessories:
- Prepared for mounting bolt-on container locks for 1x 20ft or 1x 40ft container on the outer beams
- 2" kingpin
- Galvanised steel front wall, approx. 400 mm high
- One spare wheel
- At the galvanised connection rail front, yellow-red air couplings
- 4 wheel chocks
- Forced steering from front and rear controlled via cable remote control with push buttons, includes single-track monitoring of axles
Gedpfx Ajhlz R Sep Djuc
- Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings
- Electro-hydraulic power pack
- White reflective tape on the sides, the extension, and the rear in accordance with EU regulations
- European reflective panels (red-yellow) at the rear of the trailer
- Brackets at the gooseneck and rear panel left/right for warning signs, including socket
- 6 pairs of threaded blocks between lashing rings under the top flange on the outer beam for mounting bolt-on RUD VLBG-4 rings
- Plug-in ALU sidewalls and rear wall on the gooseneck approx. 2,440 x 400 mm
- The rear galvanised plug-in stakes are removable (body length approx. 2,560 mm)
- Gooseneck rear upper area closed with removable cover
- 5 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading platform
- Folding widening pieces, approx. 230 mm per side
- 2 pairs of bolt-on RUD VLBG-4 M24 rings (LC 8,000 daN)
- 1 pair of steel ramps for bridging the low bed towing hook
- On the loading platform, a coated sand layer as anti-slip protection
- 80 km/h speed stickers at the rear and both sides
- Rear part of the driving gear’s dipper stick trough covered by a plug-in plate
- Four retractable warning boards approx. 423 x 423 mm, extendable by approx. 400 mm
- Radio remote control for forced steering, in addition to cable control, with indicator lights on the receiver for axle single-track monitoring
- Central lubrication system with 2 BEKAMAX (Pico) pumps using standard NLGI-2 grease
- Load gauge for determining axle loads
- HRM metallization (High Resistance Metallisation) of the outer frame
- Complete steel structure shot-blasted, then defined visible surfaces are metallized with ZINACOR 850 (zinc 85% - alu 15%) and hot-finished
Malý inzerát
Dortmund
933 km
Náves s nízkym nakladacím zariadením
FaymonvilleMAX Trailer 4-Achs-Jumbo-Semi mit Plane
Zavolať
Stav: nový, maximálna hmotnosť nákladu: 38 100 kg, celková hmotnosť: 50 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 100 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 760 mm, zavesenie: vzduch, veľkosť pneumatiky: 205/65 R17.5 3PMSF, farba: sivý, Výbava: ABS, Gooseneck:
Gooseneck with rear chamfer approx. 750 mm x 10°
3 pairs of lashing rings
30 mm thick hardwood flooring
Loading platform:
5 pairs of folding lashing rings on the outside
3 pairs of folding lashing rings on the outside
1 pair of horizontal lashing rings at the front of the loading platform
Cutouts in the outer frame of the loading platform for attaching tie-down straps
Approx. 48 mm thick hardwood flooring, over the axles with checker plate covering
Landing gear:
JOST landing legs with 2-speed gearbox for 24 t lifting capacity
Axles and tyres:
BPW axles, two fixed and two self-steering axles, air suspension, drum brakes, with raise/lower function
The self-steering axles can be locked for reversing via electromagnet, activated through reverse gear or manually
Axle tools
Tyres 205/65 R17.5 3PMSF
Braking system:
WABCO braking system according to EU regulations with EBS-E
Steel construction:
High-strength fine grain steel frame
Steel grades:
S355J2+N/S355MC
S690QL/S700MC
Electrical equipment:
Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK
ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets
Connection in accordance with ISO
Paintwork:
Premium, durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component zinc dust primer
High-quality 2-component top coat, single color in MB 7350 Novagrau
Metallic paint not available
Rear section metallized and painted in RAL 9010
Standard equipment included:
1 spare wheel 205/65 R 17.5
TPMS tire pressure monitoring system in accordance with ECE R 141
At the galvanized front connection strip: yellow-red air couplings
4 wheel chocks with brackets on the front wall
Mounting at the rear of the gooseneck for ALU loading ramps
Galvanized folding supports underneath the sloped section of the loading area
One bracket for a rotating beacon at the rear of the trailer
Height-adjustable curtain structure
Galvanized front wall with a tensioning mechanism for the sliding curtains
Adjustable height approx. 400 mm
"EDSCHA" brand roof, forward-sliding on ALU roof beam profiles, bolted to front and rear walls
3 pairs of sliding stanchions on the loading area
The superstructure can be hydraulically extended at the rear left and right by approx. 750 mm
Sliding roof with lift-up portal beam
Sliding curtain with 700 mm extra length, with tensioning straps approx. every 600 mm
Height to top edge of superstructure approx. 3,960 mm
Driving with open sliding roof is not permitted and will cause damage to the curtain
Hanger bar for ALU loading ramps at the rear of the vehicle
On the gooseneck and on the left and right of the rear panel, each with a bracket for warning signs including socket
Mudflap at the rear of the trailer
European reflective plates at the rear of the trailer
7 pairs of stake pockets for 100 x 50 mm insertable stakes in the outer frame of the loading platform
Lifting axle on the front axle controlled by TEBS E depending on current axle load and loading condition
Superstructure at the rear with closed ALU swing doors
On the checker plate on the gooseneck and loading area, an integrated sand coating to prevent slipping
Central lubrication system BEKAMAX with standard grease NLGI-2 and removable pump guard
Gjdpotphtmjfx Ap Douc
80 km/h speed stickers at the rear and on both sides
Load gauge for axle load determination including load diagram
Malý inzerát
Dortmund
933 km
Náves s nízkym nakladacím zariadením
FAYMONVILLE5-Achs-Doppel-Tele-Semi-Sattelauflieger
Zavolať
Stav: nový, pohotovostná hmotnosť: 15 450 kg, maximálna hmotnosť nákladu: 65 550 kg, celková hmotnosť: 80 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 21 900 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 925 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17.5, farba: sivý, Výbava: ABS, Gooseneck:
Gooseneck in SNT design to optimize the loading area length, approximately 3,700 mm long, rear with a bevel of approx. 1,000 mm x 10°. Technical fifth wheel load: 30,000 kg. Suitable for tractor units: 4x2, 6x2, and 6x4.
Loading area:
Loading area in double-extendable design, approx. 8,800 mm long with a rear bevel of approx. 500 mm x 10°. The central beam features a support table approx. 300 mm wide with long holes at the front and rear for the attachment and repositioning of optional bridging elements, welded in place. Pneumatic locking mechanism with conical locking bolts and reinforced locking positions, the supply lines are safely routed within the extendable beams and automatically adjust to the respective platform length.
Axles and tyres:
Guedorigw Repfx Ap Djc
BPW axles and suspension, first axle steered ahead, all other axles hydro-mechanically forced-steered. First axle with electromagnetically actuated reverse lock via reverse gear and manual activation. Technical axle load: 12,000 kg. Air suspension with raise and lower valve. Manufacturer at our discretion.
Sockets and lighting:
24-volt lighting system in accordance with EU regulations. ASPÖCK-UNIBOX at the front connection rail with 24N, 24S & 15-pin sockets. Complete HRM metallisation. Complete steel construction shot-blasted, then finished with ZINACOR 850 hot-dip coating.
Painting:
6-stage final treatment: Entire steel structure shot-blasted post-welding. One coat zinc-based primer, one coat adhesion primer. Final coating with two coats of 2-component paint, single-tone in DB 7350 Novagrau, followed by sealing of cavities with special wax.
Accessories:
Detachable steel front wall, approx. 400 mm high. Supply line connection rail to tractor unit mounted at height of outer frame profile. ASPÖCK-UNIBOX at front connection rail with 24N, 24S & 15-pin sockets. Should your pin assignment differ from ISO connector standard, please inform us.
3 kW electric-hydraulic unit to operate hydraulic functions (excluding hydraulic winches). On the gooseneck: one pair of detachable ALU side walls, approx. 400 mm high, anodised finish. 3.5" king pin. Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide.
2 wheel chocks with holders in front of the front wall. Mechanical landing gear with 2-speed gearbox and hand crank. Control valves for hydraulic ramps on the right side of the vehicle. One pair of mechanical rear supports. Central lubrication system with 1 pump, BEKAMAX brand, standard grease per NLGI-2. Removable protector for the central lubrication pump(s).
Remote axle steering from front and rear via cable remote control with push buttons, featuring axle alignment monitoring, without installation in tractor unit. Below gooseneck and at the end cross member, one 7-pin socket with warning sign holder each on left and right. One 7-pin socket at the end cross member.
User manual and documentation included. Single-piece INOX toolbox, approx. 2,480 x 340 x 390 mm, straight design.
Please note: Special equipment and accessories may increase curb weight and thus reduce payload accordingly.
Warning package: 4 warning signs, approx. 423 x 423 mm, extendable by approx. 1,000 mm, incl. 2 LED position lights and brackets for beacon.
Malý inzerát
Dortmund
933 km
Náves s nízkym nakladacím zariadením
FaymonvilleMAX Trailer 8-(3+5)-Achs-Tiefbett-Kombi.
Zavolať
Stav: nový, pohotovostná hmotnosť: 34 500 kg, maximálna hmotnosť nákladu: 106 700 kg, celková hmotnosť: 141 200 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 7 150 mm, šírka ložného priestoru: 2 850 mm, výška ložného priestoru: 580 mm, veľkosť pneumatiky: 285/70 R19.5, farba: sivý, prevádzková hmotnosť: 34 500 kg, Výbava: ABS, Gooseneck:
- Gooseneck hydraulically liftable/lowerable and detachable
- Length approx. 3,650 mm
- Extensive lashing positions
- For tractor units: 6 x 4 or 8 x 4
3-Axle Compact Front Undercarriage:
- Hook mountings at front and rear
- Undercarriage length x width approx. 3,560 mm x 2,850 mm
- Extensive lashing positions
Excavator Deck “BB-A”:
- Telescopic excavator deck “BB-A” with drive-over deck hooks at the front and pin-lug coupling at the rear
- Length x base width approx. 7,150 mm x 2,850 mm
- Beam height x width approx. 430 mm x 1,350 mm
- Loading height 580 mm with ground clearance of 150 mm
- 5 pairs of hanging lashing rings (LC 10,600 daN)
- 4 pairs of M30 threaded blocks on the inner beam for mounting screwable rings
5-Axle Rear Undercarriage:
- Mechanical pin-lug coupling at the front for low bed attachment; end cross-member at the rear
- Undercarriage length x width approx. 6,840 mm x 2,850 mm
- Extensive lashing positions
Pendulum Axle and Tyres (front and rear undercarriage):
- "PENDULUM AXLE", all axles hydro-mechanically forced steered
- Hose rupture valve on axle balancing cylinders with automatic RESET function
- Hydraulic cylinders fitted with shut-off taps and locking plugs for securing in raised position
- Final coating of axles with two layers of 2K paint, single color MB 7350 Novagrau
- Technical axle load: 14,640 kg (62 km/h)
- Hydraulic axle compensation
- Axle tools
- Tyres: 285/70 R19.5
Remote Steering (Follow-up Steering):
- Remote steering from front and rear operable via cable remote control with push buttons, with axle tracking monitoring
- Socket for remote steering operation at the gooseneck
- Cable remote control with push buttons including axle tracking monitoring
Accessories included:
- Yellow-red air couplings on galvanized front connection rail
- Steel front wall approx. 400 mm high
Godpfxowhywfe Ap Dsuc
- 4 wheel chocks with holders
- 2 spare wheels 285/70 R19.5
- 3.5" king pin
- Boom with winch for spare wheel at gooseneck front
- Truck hydraulic connection with flow regulator (40 l/min), including boom for suspending service lines; tractor unit tank must have at least 80 liters capacity with connectors
- White reflective tape according to EU regulations on the sides and on the extension, red at the rear
- Plug-in ALU side boards and tailgate on the gooseneck, approx. 400 mm high, anodized
- Control levers on the gooseneck protected by a foldable cover
- Separate air connection with air gun at the gooseneck
- Central lubrication system BEKAMAX with standard grease NLGI-2, 1x at the gooseneck, 1x at the 3-axle undercarriage, 1x at the 5-axle undercarriage
- Variomax tool kit
- Multi-coupling hydraulic connections at low bed hook area
- Front undercarriage with separate air connection for pneumatic tools
- Threaded insert option (ø 40 mm) every approx. 500 mm on the outer web of the excavator deck for screw rings
- Foldable width extensions with steel inlays, adjustable from approx. 2,850 mm to 3,250 mm
- Steel inlays with approx. 12 mm thick rubber covering
- Two INOX toolboxes 855 x 340 x 390 mm
- Radio remote control for steering in addition to cable remote control
- Sand layer coating as anti-slip protection
- 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery
Malý inzerát
Dortmund
933 km
Náves s nízkym nakladacím zariadením
Meusburger3-Achs-Semi mit 2 Paar Radmulden
Zavolať
Stav: nový, pohotovostná hmotnosť: 8 490 kg, maximálna hmotnosť nákladu: 40 510 kg, celková hmotnosť: 49 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 200 mm, šírka ložného priestoru: 2 550 mm, veľkosť pneumatiky: 245/70 R 17,5, farba: sivý, prevádzková hmotnosť: 8 490 kg, Výbava: ABS, Chassis:
- Robust steel frame construction with front frame offset and flat loading platform with rear taper approx. 500x100 mm
- Neck height 200 mm with chamfered corners
- Sloping gooseneck end approx. 500 x 100 mm (traction ribs on the outer frame in the area of the rear taper)
- 2 king pin positions with interchangeable 2" king pin
- Outer frame closed to the outside as a perforated outer frame for lashing with tension straps
- Reinforced frame design / point load at center of gravity
- Preparations for extendable width extensions in the loading area
- With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting roughly after 2nd axle to the end of the vehicle
- 1 pair of wheel recesses in front of the axle with steel covers
- (Covers with Körapur coating), depth approx. 400 mm, and 1 pair of wheel recesses between 1st and 2nd axle with steel covers
- Side underrun protection = extended end plate
- Drop-down supports at the rear
Floor:
- 35 mm larch wooden floor with aluminum omega profiles
Axles, Steering and Tires:
- BPW air suspension axles, each with 10 t axle load, bellows diameter 360 mm
- S-cam brakes 300/200 mm, asbestos-free brake linings
- Automatic slack adjusters
- Lifting and lowering device with total lift approx. 200 mm
- 2nd driving position via ball valve +50 mm
- 1st axle lift axle (wired via EBS), automatic activation, with mechanical emergency operation via push button on the trailer
- 3rd axle as friction-steered trailing axle with electrical and mechanical lock
- 12 steel disc wheels, 10-hole, hub-centered
- 12 tires 245/70 R 17.5 143/141J, tubeless
- Includes tire pressure monitoring system
Brake System:
- Two-line brake system with EBS-E including RSS
- EBS (WABCO 4S3M)
- Spring-loaded parking brake
- Pneumatic connections yellow/red
Painting:
- Steel shot blasting, spray galvanizing of chassis and priming
- Painting of chassis/wheel hubs/outer frame in DB 7350 Novagrau
Accessories:
- Removable side and rear walls on the gooseneck, approx. 400 mm high
- Spare wheel holder
- Side aluminum underrun protection
- 4 wheel chocks
- Steel mudguards with Clear-Pass
- Long license plate holder in end plate
- 1 plug-in ECE plate at the rear
- 11 pairs of ZK modules 10t on the side:
- 2x on the gooseneck
- 9x on the loading platform
- Without rear towing eyes
- Extending warning signs incl. 3 position lights each, front at landing gear and rear in front of end plate, infinitely extendable to a loading width of 4,500 mm
Guodpfxjwu A Slj Ap Doc
- 4 holders for warning signs for plugging into stake pockets on the loading platform
- 6 pairs of stake pockets at the side for plug-in stakes 100x50 mm
- 2 transverse rows of stake pockets for plug-in stakes 100x50 mm on the gooseneck from outer frame inward to main frame (1x in front of and 1x behind the king pin positions)
- 3 transverse rows of stake pockets for plug-in stakes 100x50 mm on the loading platform from outer frame inward to main frame (1x in the front area, 1x before 1st axle and 1x after 3rd axle)
- 2 pairs of steel plates in the loading area for container locks to accommodate 1x 20ft container
- Rubber skirt mounted on underrun protection
- Preparation (=cable routing for NATO cable and hole pattern for later installation of NATO socket at the front of the end plate as well as bracket on the vehicle) for retrofitting an electro-hydraulic unit at the rear right for possible operation of drive-on ramps
- Mechanical 24 t landing legs with single-side op
Malý inzerát
Dortmund
933 km
Náves s nízkym nakladacím zariadením
FaymonvilleMAX Trailer 4-Achs-Mega-Tele-Semi-niedri
Zavolať
Stav: nový, pohotovostná hmotnosť: 10 600 kg, maximálna hmotnosť nákladu: 39 400 kg, celková hmotnosť: 50 960 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 760 mm, zavesenie: vzduch, veľkosť pneumatiky: 205/65 R17.5, farba: sivý, prevádzková hmotnosť: 10 600 kg, Výbava: ABS, Gooseneck:
- Gooseneck with 30 mm hardwood floor
- Gooseneck in straight design at the rear
- 3 pairs of lashing rings (LC 5,000 daN)
Extendable loading area:
- Loading area in extendable version
- 5 pairs of lashing rings foldable outwards
- 3 pairs of lashing rings foldable outwards
- 1 pair of lashing rings laid flat at the front of the loading area
- Cut-outs in the outer frame of the loading area for attaching tension belts
- Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering
Landing legs:
- JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load)
Axles and tyres:
- BPW axles, two rigid, two trailing steering axles
- Air suspension, with drum brakes, with lifting/lowering function
- The trailing steering axles with electro-magnetic reversing lock, can be activated either via reverse gear or manually
- Axle tools
- Tyres 205/65 R17.5
Brake system:
- Brake system in accordance with EU regulations with EBS-E (4S3M)
Steel construction:
- Steel construction made of high-strength fine-grained steels
- Steel grades:
- S355J2+N/S355MC (yield strength 355 MPa)
- S690QL/S700MC (yield strength 690 MPa)
Electrical system:
- Electrical system in accordance with EU regulations, 24-volt lighting, ASPÖCK-NORDIK (ASS3)
- ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets
- Connections according to ISO:
- 24N ISO-1185
- 24S ISO-3731
- 15-pin ISO-12098
Paintwork:
- First-class and long-lasting corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer
- High-quality 2-component (2K) top coat, single-colour in Novagrau
- Rear section metalized and painted in RAL 9010 (pure white)
Included accessories:
- One spare wheel with holder in front of the front wall
- 2" kingpin
- Galvanized steel front wall approximately 400 mm high
- Yellow-red air couplings on the galvanized connection bar at the front
- 4 wheel chocks with holders on the front wall
- Galvanized folding supports under the sloped loading area
- Bracket for a revolving beacon at the rear of the trailer
- Galvanized, extendable width approx. 230 mm per side
- White reflective tape to EU regulations on the side, at the extension, and red at the rear
- At the gooseneck and on the rear plate, left and right, one bracket for warning signs each, including socket
- European reflective warning plates (red-yellow) at the rear of the trailer
- TPMS tyre pressure monitoring system according to ECE R 141
Gsdpfx Apst Ag Uws Douc
- On the gooseneck, plug-in aluminium side and rear panels approx. 2,440 x 400 mm
- The rear, galvanized plug-in stakes are removable, length of the structure approx. 2,560 mm
- 7 pairs of WADER container locks
- 1x 20ft container on the loading area; 1x 40ft container on the loading area; 1x 40ft container above the gooseneck; 2x 20ft containers
- 7 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area
- Lift axle at the front axle controlled by TEBS E, depending on current axle load and load condition
- Movable hanging bar for aluminium approach ramps at the rear of the vehicle
- On checker plates on the gooseneck and loading area, a painted-in sand layer as anti-slip protection
- Four warning signs each extendable by approx. 400 mm, size approx. 423 x 423 mm, with position light
- On warning signs, bracket for rotating beacon
- 80 km/h speed stickers on the rear and both sides
- Load manometer for determining axle l
Malý inzerát
Dortmund
933 km
Náves s nízkym nakladacím zariadením
FaymonvilleMAX Trailer 3-Achs-Tele-Plateau-zwangsg.
Zavolať
Stav: nový, pohotovostná hmotnosť: 9 300 kg, maximálna hmotnosť nákladu: 38 700 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 1 200 mm, zavesenie: vzduch, veľkosť pneumatiky: 385/65 R 22,5, farba: sivo-čierny, Výbava: ABS, Ložná plocha:
• Výsuvná ložná plocha s pneumaticky ovládaným uzávěrem
• Ložná plocha s cca 30 mm silnou podlahou z dřevěného masivu
• 7 párů vyklápěcích vázacích ok směrem ven (LC 5 000 daN)
• 3 páry vyklápěcích vázacích ok směrem ven (LC 10 000 daN)
• Výřezy ve vnějším rámu ložné plochy pro zavěšení upínacích pásů (LC 2 000 daN)
Nápravy a pneumatika:
• Nápravy BPW a odpružení, všechny nápravy hydro-mechanicky nuceně řízené
• Se kotoučovými brzdami
• Technické zatížení nápravy: 10 000 kg
• Vzduchové odpružení s ventilem pro zvedání a spouštění
• Nářadí pro nápravy
• Pneumatiky: 385/65 R 22,5
• Systém kontroly tlaku v pneumatikách TPMS dle ECE R 141
Brzdový systém:
• Brzdový systém WABCO dle předpisů EU s EBS-E (2S2M)
Elektrické zařízení:
• Elektrická instalace dle předpisů EU, osvětlení 24 V ASPÖCK-NORDIK (ASS3)
• ASPÖCK-UNIBOX na připojovací liště vpředu se zásuvkami 24N, 24S & 15-pin
• Připojení dle ISO
• 24N ISO-1185
• 24S ISO-3731
• 15-pin ISO-12098
Příslušenství v ceně:
• Řízení zadní nápravy zepředu a zezadu pomocí kabelového dálkového ovládání s tlačítky, s kontrolou jedné stopy náprav
• 4x zajišťovací klíny s držákem na čelní stěně
• 2" královský čep
• 1x pozinkovaná čelní stěna z oceli, cca 1 600 mm vysoká
• Na pozinkované připojovací liště vpředu žluto-červené vzduchové spojky
• Bílé reflektorové pásky dle EU na bocích, výsuvu a vzadu na návěsu v červené barvě
• Evropské reflektorové štítky (červeno-žluté) vzadu na návěsu
• 1x zástěrka vzadu na návěsu
• Návod k obsluze a popis
• Držák pro výstražné světlo vzadu na návěsu
• Ložná plocha s cca 30 mm silnou dřevěnou podlahou zakrytá Omega-profily
• 10 párů kapes na sloupky pro zasouvací sloupky 100 x 50 mm ve vnějším rámu ložné plochy
• 1x držák rezervního kola pod ložnou plochou vpravo ve směru jízdy
• Elektrohydraulická jednotka
• Na labutím krku a zadní části vlevo i vpravo držák výstražných štítů včetně zásuvky
• Na centrálním nosníku lakovaná vrstva písku jako ochrana proti smyku
• 6 párů kontejnerových kapes WADER v ložné ploše, pro 1x 20ft, 2x 20ft nebo 1x 40ft kontejner, u výsuvu další uzamykací bod pro 45ft kontejner
• 4 páry příčných kapes pro sloupky 100 x 50 mm v ložné ploše
• Montovaná nástupní žebřík vpravo ve směru jízdy
Gujdsiu Etrjpfx Ap Djc
• 1x box na nářadí z HDPE cca 1 200 x 500 x 480 mm vpředu pod ložnou plochou vlevo ve směru jízdy
• Centrální mazací zařízení BEKAMAX (Pico) s odnímatelným krytem čerpadla
• Zvedací náprava na přední nápravě s ovládáním přes TEBS E v závislosti na aktuálním zatížení nápravy a stavu naložení
• Bezdrátové dálkové ovládání pro řízení náprav navíc ke kabelovému ovládání, s kontrolkami na přijímači pro kontrolu jedné stopy
• Čtyři výsuvné výstražné tabule cca 400 mm, cca 423 x 423 mm s pozičním světlometem
• Na výstražných tabulích držák pro výstražné světlo
• Nálepky s omezením rychlosti 80 km/h vzadu a na obou stranách
• Manometr pro měření zatížení náprav včetně zatěžovacího diagramu
• Metalizace HRM (High Resistance Metallisation) vnějšího rámu
• Celá ocelová konstrukce tryskána, poté definované viditelné plochy metalizované a žárově upraveny ZINACOR 850 (zinek 85 % - hliník 15 %)
Malý inzerát
Dortmund
933 km
Náves s nízkym nakladacím zariadením
Faymonville6-Achs-Tele-Semi mit PA-X Achssystem
Zavolať
Stav: nový, pohotovostná hmotnosť: 22 700 kg, maximálna hmotnosť nákladu: 79 300 kg, celková hmotnosť: 102 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 11 000 mm, šírka ložného priestoru: 2 850 mm, výška ložného priestoru: 920 mm, veľkosť pneumatiky: 245/70 R 17.5, farba: sivý, prevádzková hmotnosť: 22 700 kg, Výbava: ABS, Swan neck:
Gusdpfx Aok Af Svjp Dsc
- Swan neck in SNT design for optimizing the loading platform length, approx. 3,750 mm long, with rear chamfer approx. 850 mm x 10°
- Hydraulically raisable and lowerable, lifting stroke ± 250 mm including hydraulic connection linked to the hydraulic axle compensation of the first two axles
- Open at the rear third
- Suitable for tractor units: 6 x 4 and 8 x 4
Loading platform:
- Extendable loading platform, approx. 11,000 mm long with rear chamfer approx. 500 mm x 10°.
- Recess in the loading platform including in the bevel for accommodating the excavator bucket arm, approx. 4,240 x 900 x 440 mm
- Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the respective platform length
Ramps:
- Pair of two-part steel ramps, approx. 4,650 mm long and 900 mm wide
- Hydraulically foldable ramp tips
- Ramps hydraulically adjustable sideways approx. 235 mm outward and approx. 215 mm inward, individually
- "Super Grip" rubber surface 25 mm and steel plate approx. 5 mm as additional reinforcement on the loading platform bevel
- Rectangular climbing strips 20x30 mm, approx. every 200 mm on the outer ramp frame
Axles, suspension and tyres:
- PA-X axle system, all axles force-steered hydro-mechanically
- Steering behavior of the first two axles can be optimally adjusted to the loading platform length, both mechanically and hydraulically
- Hose rupture valve on the axle compensation cylinder with automatic RESET function
- Hydraulic cylinders with shut-off valves and pins for securing in raised position
- 245/70 R 17.5 3PMSF
Accessories included:
- Removable steel front wall, approx. 400 mm high
- Supply line connection strip for tractor unit, mounted at the height of the outer frame profile
- 1 spare wheel
- Outer beams of the swan neck with mounting holes for screwable lashing rings
- First hole approx. 200 mm from front, then approx. every 400 mm
- 2 pairs of screw-in lashing rings included
- Tread plate covering over the swan neck
- On the swan neck, 1 pair of removable ALU side walls, approx. 400 mm high, anodized
- Removable ALU rear wall on the swan neck, approx. 400 mm high, anodized
- 3.5" king pin / 2" king pin mounted
- Guide plate on the swan neck for the fifth wheel, approx. 500 mm wide
- 4 wheel chocks
- 4 axle load gauges
- Mechanical drop supports at the front
- 1-piece INOX toolbox, approx. 2,480 x 340 x 390 mm
- Mechanical drop supports at the front
- Continuous steel plate covering on the loading platform with painted-on sand layer as slip protection
- 1 intermediate table, approx. 500 mm wide, for extension, with elongated holes for insertable and repositionable bridging elements
- Painted-on sand coating on the support surfaces of the intermediate table
- Mechanical lock for locking the intermediate table when extended
- 8 pairs of stake pockets in the outer frame
- Extendable galvanized widening sections, approx. 230 mm per side
- 1 pair of hydraulic rear supports
- Central lubrication system
- 1 reversing spotlight each on the left and right at the rear of the vehicle
- 3 kW electric-hydraulic power unit
- Loose widening planks in reinforced steel U-profile frame
- Radio and cable remote control
- 4 warning signs, approx. 423 x 423 mm
Malý inzerát
Dortmund
933 km
Náves s nízkym nakladacím zariadením
FaymonvilleMAX Trailer 3-Achs-Tele-Semi-nachlaufg.
Zavolať
Stav: nový, maximálna hmotnosť nákladu: 38 800 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5 3PMSF, farba: sivý, Výbava: ABS, Gooseneck:
- Gooseneck with chamfered front corners at 45° and rear chamfer approx. 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- 30 mm thick hardwood flooring
Extendable loading platform:
- Extendable loading platform with rear chamfer approx. 1,000 mm x 8°
- 6 pairs of outward-folding lashing rings (LC 5,000 daN)
- 3 pairs of outward-folding lashing rings (LC 10,000 daN)
- 1 pair of flat-mounted lashing rings at the front of the loading area (LC 10,000 daN)
- Cut-outs in the outer frame of the loading platform for securing straps (LC 2,000 daN)
- Approx. 48 mm thick hardwood flooring, over the axles with anti-slip chequer plate
Axles and tires:
- BPW axles and suspension, 2 rigid axles, 1 self-steering axle
- Technical axle load: 12,000 kg
- Electromagnetic reverse lock, activated via reverse gear and manually
- Air suspension with lift and lowering valve
- Axle tools
- 235/75 R 17.5 3PMSF
Brake system:
- WABCO brake system according to EU regulations with EBS-E (2S2M)
Landing legs:
- JOST landing legs (mechanical) with 2-speed gearbox, 24t lifting capacity (50t test load)
Included accessories:
- One spare wheel with holder in front of the bulkhead
- 2-inch king pin
- Galvanized steel bulkhead, approx. 400 mm high
- Yellow and red air couplings on the galvanized front connector strip
- 4 wheel chocks with holders at the bulkhead
- Mount for rotating beacon at the rear of the trailer
- Receptacle at the rear of the gooseneck for ALU approach ramps
- Galvanized folding supports under the chamfer of the loading platform
- Cover plates for bridging the gap between ramps and platform
- White reflective tape according to EU regulations on sides, extension, and red at the rear
- Electro-hydraulic unit positioned at the rear, under the platform
- On the gooseneck and ramps, left and right, mounts for warning signs including power socket
- Control valves for the ramps installed on the right side of the trailer
- One mud flap at the rear of the trailer
- User manual and documentation on USB stick
- ALU side walls and rear wall approx. 2,440 x 400 mm on the gooseneck
- The rear, galvanized plug-in stanchions are removable (structure length approx. 2,560 mm)
- Four extendable warning signs approx. 423 x 423 mm with position light, extendable by approx. 400 mm
- 3 pairs of WADER container pockets in the platform suitable for a 20ft, 30ft, or 40ft container
- 6 pairs of 100x50 mm stanchion pockets in the external frame of the loading platform
- Galvanized side extensions, extendable by approx. 230 mm per side
Gujdpfsuqlmnjx Ap Doc
- 20 x 20 mm square lashing rails every 200 mm on the external frame of the platform's chamfer
- Anti-slip sand coating, painted on chequer plates above the king pin and on the loading platform
- Mount for rotating beacon on warning signs
- European reflective boards (red-yellow) at the rear of the trailer
- 80 km/h speed stickers at the rear and both sides
- Load manometer for axle load measurement including load diagram
- HRM metallization (High Resistance Metallisation) of the external frame
- Complete steel structure shot-blasted, then all defined visible surfaces hot-metal sprayed with ZINACOR 850 (zinc 85% - aluminum 15%)
Malý inzerát
Dortmund
933 km
Náves s nízkym nakladacím zariadením
FaymonvilleMAX Trailer 3-Achs-Semi-nachlaufgelenkt
Zavolať
Stav: nový, pohotovostná hmotnosť: 7 900 kg, maximálna hmotnosť nákladu: 41 600 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, prevádzková hmotnosť: 7 900 kg, Výbava: ABS, Gooseneck:
- Gooseneck with rear taper approx. 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- Hardwood flooring, 30 mm thick
Loading Platform:
- Loading platform with rear taper approx. 1,000 mm x 8°
- Recess in the sloped section and extending into the loading platform for the excavator bucket stick, approx. 2,900 x 750 x 210/290 mm
- Cut-outs in the outer frame of the loading platform for attaching tensioning straps
- Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering
Landing Legs:
- JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load)
Axles and Tyres:
- BPW axles and suspension, 2 fixed axles, 1 trailing-steer axle
- Technical axle load: 12,000 kg
- Electromagnetic reverse lock, activated by reverse gear and manually
- Air suspension with lift and lower valve
- TPMS tyre pressure monitoring system according to ECE R 141
- Tyres 235/75 R 17.5
Paintwork:
- Complete steel structure automatically shot-blasted after welding with turbine blasting unit
- Second blast treatment with corundum for optimal adhesion of the coating system
- Final coating with 2 coats of 2K topcoat, single colour in RAL MB 7350 Novagrau
- Rims painted silver
- Rear section metallised and painted in RAL 9010 (Pure White)
- Cavities sealed with special wax
Electrical System:
- Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3)
- ASPÖCK-UNIBOX on the front connector strip with sockets: 2x 7-pin & 1x 15-pin
Included Accessories:
- Extensive lashing positions
- 2" king pin
- One galvanised steel front wall approx. 400 mm high
- Yellow-red air couplings on the galvanised front connector strip
- 4 wheel chocks with holder on the front wall
- Mounting at the rear of the gooseneck for ALU loading ramps
- Galvanised folding supports under the sloped rear section of the loading platform
- A holder for a beacon at the rear of the trailer
- Galvanised, extendable side extensions approx. 230 mm each side
- White reflective tape on the sides and red on the rear in accordance with EU regulations
- At the gooseneck and rear plate, left and right, each with a holder for warning plates including socket
- On the gooseneck, plug-in ALU side and rear boards approx. 2,440 x 400 mm
- The rear, galvanised stakes are removable
- 2 pairs of WADER container locks in the loading platform for a 20 ft container
- 6 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the loading platform
- Sliding mounting rail for ALU loading ramps at the rear of the vehicle
- 20 x 20 mm square climbing strips every 200 mm on the outer frame of the sloped section of the loading platform
- Painted-on sand coating as anti-slip protection on the checker plates of the gooseneck and the loading platform
- Four warning plates extendable by approx. 400 mm, approx. 423 x 423 mm each, with position light
- Holder for beacon on the warning plates
- 80 km/h speed stickers on the rear and on both sides
- European reflective panels (red-yellow) at the rear of the trailer
- Manual and documentation on USB stick
Godpfxeunrapj Ap Deuc
- HRM metallisation (High Resistance Metallisation) of the outer frame
- Complete steel structure shot-blasted, then the defined visible areas are hot-finished with ZINACOR 850 metallisation (zinc 85% - aluminium 15%)
Malý inzerát
Dortmund
933 km
Náves s nízkym nakladacím zariadením
Faymonville2-Achs-Tiefbett-Pendelach.-Bolzen-Lasch.
Zavolať
Stav: nový, pohotovostná hmotnosť: 12 800 kg, maximálna hmotnosť nákladu: 36 200 kg, celková hmotnosť: 49 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 850 mm, šírka ložného priestoru: 2 550 mm, výška ložného priestoru: 375 mm, veľkosť pneumatiky: 245/70 R 17.5, farba: sivý, prevádzková hmotnosť: 12 800 kg, Výbava: ABS, Gooseneck:
- Gooseneck in SNT design to optimize loading platform length, length approx. 3,750 mm
- Gooseneck hydraulically raisable/lowerable and detachable
- Technical fifth wheel load: 25,000 kg
- For tractor units: 4 x 2, 6 x 2, and 6 x 4
Loading Platform:
- Low bed with external beams, designed as a telescopic vessel bridge in low-profile construction with front extension
- Length 6,850 mm x width 2,540 mm
- One locking position approx. every 1,000 mm on the extension
Rear Chassis:
- Rear chassis with closed outer frame, checker plate cover, and continuous prismatic excavator trough approx. 1,250/700 x 505 mm, open at the rear
Axles, Suspension, and Tyres:
- "PENDLE-AXLE", all axles hydro-mechanically forced-steered
- Hose rupture valve on axle compensation cylinder with automatic RESET function
- Hydraulic cylinders with shut-off valves and locking pin for securing in lifted position
- Axles finished with 2 coats of 2K acrylic paint, single color in "FAY-Grey-34-0260"
- Technical axle load: 12,000 kg
- Hydraulic axle compensation
- Tyres 245/70 R 17.5
- TPMS tire pressure monitoring system according to ECE R 14
- TPMS tire pressure sensors mounted in all wheels including spare wheels
Accessories included:
- Plug-in front wall made of steel, approx. 400 mm high
Gjdpfxevy Edcj Ap Douc
- 3 kW electro-hydraulic unit for controlling hydraulic functions, except hydraulic winches
- One spare wheel with mounting adapter
- Outer beams on gooseneck with mounting holes for bolted lashing rings
- Detachable ALU side walls on gooseneck, approx. 400 mm high, anodized
- Detachable ALU rear wall on gooseneck, approx. 400 mm high, anodized
- Checker plate cover above the gooseneck
- Guide plate on gooseneck for the fifth wheel plate, approx. 500 mm wide
- Operating area on gooseneck illuminated with on/off switch
- Hydraulic crossbeam to support the gooseneck on the tractor unit or a dolly
- 2" king pin
- Anti-slip stickers on the left chamfer of the gooseneck
- Rear upper part of the gooseneck closed with a removable cover
- 4 wheel chocks with holders
- Hydraulic connections from gooseneck to low bed with multi-coupling instead of screw couplings
- 1 pair of steel ramps with climbing strips and mounting bolts for bridging the mounting hooks of the low bed
- Ramps can be placed over or between the hooks
- Mounting provision for steel ramps at the rear between the outer beams of the gooseneck
- Prepared to accommodate bolt-on container mounts for 1x20ft on the outer beams
- Mechanical pin-lug coupling from low bed to chassis for exchange of loading platform or installation of extension beams
- With electro-pneumatic-hydraulic couplings
- Outer beams of the low bed with integrally painted anti-slip sand layer
- Removable (galvanized) loading floor in 3 sections insertable between outer beams with hardwood covering
- Folding wideners, approx. 230 mm per side
- Hanging bar at the front of the rear chassis for loose drive-on ramps for the low bed
- 2 pairs of stake pockets recessed in the outer frame of the chassis, for plug-in stakes approx. 100 x 50 mm
- Hanging bar for loose ALU ramps on the rear cross member of the vehicle
- Central lubrication system with 2 pumps
- Radio and cable remote control
- 4 warning signs, approx. 423 mm x 423 mm, extendable
- Extensive lashing positions
Malý inzerát
Kevelaer
1 009 km
Náves s nízkym nakladacím zariadením
TriasTieflader
Zavolať
Stav: použitý, Dobrý stav. Dĺžka ložnej plochy 8000 mm, nájazdová výška 500 mm. Elektrohydraulická rampa (zástrčka NATO).
Gsdpfxsy Hdr Do Ap Djuc
Malý inzerát
Salzburg
501 km
Náves s nízkym nakladacím zariadením
GoldhoferSTZ-VKL 3-34/80 A with Extension beam´s
Zavolať
Stav: dobrý (použitý), Funkcionalita: plne funkčný, celková hmotnosť: 57 600 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 7 240 mm, šírka ložného priestoru: 2 750 mm, výška ložného priestoru: 945 mm, farba: modrá, Rok výroby: 2008, Tieto hlboké podvozky máme k dispozícii 2 kusy.
Výrobca: Goldhofer
Typ: STZ-VKL 3-34/80 A
Rok výroby: 2008
Celková hmotnosť: 54 000 kg
Vlastná hmotnosť: 21 000 kg
Užitočné zaťaženie: 33 000 kg
Celková dĺžka súpravy: 20 000 mm (max. teleskopicky 24 200 mm)
Guedpfxsxc U Nvj Ap Dsc
Nakladacia plocha (d x š): 7 300 mm x 2 750 mm (teleskopicky do 4 200 mm)
Pneumatiky: 235/75 R 17,5
Extra:
Predĺžovací nosník: 2x 6 000 mm
Pečať dôvery
Predajcovia certifikovaní spoločnosťou TruckScout24

Malý inzerát
Bielefeld
870 km
Príves s hákovým nakladačom
Muldy 3500 Pick Up Abrollkipper 2m³19
Zavolať
Stav: nový, Funkcionalita: plne funkčný, pohotovostná hmotnosť: 1 290 kg, maximálna hmotnosť nákladu: 2 210 kg, celková hmotnosť: 3 500 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 2 560 mm, šírka ložného priestoru: 1 620 mm, výška ložného priestoru: 500 mm, objem nakladacieho priestoru: 2 m³, farba: oranžová, STOCK VEHICLE/DEMONSTRATION VEHICLE without registration
Weber Muldy 3500 Pick Up – the original!!!
Permissible gross weight: 3,500 kg
Unladen weight: 1,290 kg
Payload: 2,210 kg
Tipper body dimensions: 2,560 x 1,620 x 500 mm
Overall dimensions: 4,750 x 1,720 x 1,345 mm
Godpjyx Aplsfx Ap Dsuc
The most intelligent and advanced hooklift system in the 3.5 t class
Usable in garages with a ceiling height starting from 1.90 meters
Extremely low loading angle – only 16 degrees
No negative nose weight at the coupling point thanks to the articulated chassis frame
Automatic central locking for hook and container
Linearly movable hook on central beam
Tandem lift cylinder for central beam
Manufactured from high-quality materials: extra high-strength fine-grained steel (chassis frame, skip, platform) and aluminium (platform flooring)
Thanks to the Honda petrol engine with hydraulic unit: independent operation from the towing vehicle
Trade-in: We are happy to accept your trailer as a trade-in. Please contact us or send us pictures and the vehicle details: 05205 9987065 or 0171 6241577
Delivery: On request, your trailer can be delivered after advance payment. The cost per km (distance Bielefeld to your destination) is €1.60 incl. VAT.
We also offer the following services:
-Service
-Workshop
-TÜV (roadworthiness inspections)
-Tires and wheels
-Tarpaulins and frames
-Custom fabrication in our metal workshop
-Rental
We always have around 400 trailers in stock! We look forward to your visit.
Office, showroom, workshop, TÜV, rental and spare parts
Senner Hellweg 187
33689 Bielefeld
05205 9987065
0171 6241577
Malý inzerát
Dortmund
933 km
Náves s nízkym nakladacím zariadením
Goldhofer4-Achs-Tele-Semi mit hydr. Doppelklapprampen
Zavolať
Stav: použitý, pohotovostná hmotnosť: 10 900 kg, maximálna hmotnosť nákladu: 43 600 kg, celková hmotnosť: 54 500 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 04/2025, dĺžka ložného priestoru: 8 700 mm, šírka ložného priestoru: 2 550 mm, výška ložného priestoru: 855 mm, veľkosť pneumatiky: 245/70 r17.5, farba: sivý, Rok výroby: 2025, prevádzková hmotnosť: 10 900 kg, Výbava: ABS, Gooseneck, rigid, in central tube design:
- Enclosed outer frame with cutouts for lashing straps (LC 1,500 daN)
- Steel flooring with anti-slip coating
- Including perforated rail for aluminum approach ramps
- 2" king pin
- Mechanically operated BPW landing gear
- 550 mm long, 8° bevel at the rear end of the gooseneck
- Front bulkhead including stowage position for rear wall, 400 mm high
Gusdpji Ai E Rjfx Ap Dec
- Spare wheel holder mounted upright at the front of the gooseneck
- 3 pairs of recessed lashing rings LC 5,000 daN on the gooseneck deck
- Aluminum drop-in sideboards, 400 mm high, consisting of 2x sideboards (length 3,150 mm) and rear board with stanchions (galvanized)
- Rectangular storage box, aluminum, with folding lid and lockable, approx. 400 x 800 mm, centrally mounted
- Storage box 45’, aluminum, with folding lid and lockable, approx. 400 x 800 mm, left side
- Storage box 45’, aluminum, with folding lid and lockable, approx. 400 x 800 mm, right side
Load platform, single telescoping:
- Enclosed outer frame with cutouts for lashing straps (LC 1,500 daN)
- Fixed section at front 700 mm
- Steel tread plate with anti-slip coating
- Beveled transition between fixed section and load platform for attaching bridging rails and wheel recesses
- Excavator recess including elongated holes for load securing (LC 1,500 daN), approx. 3,850 mm long
- Prepared for hydraulic ramp (electric supply fitted)
- Beams for extension to 3,000 mm width
- Beveled vehicle rear, 8°, 550 mm long
- Sled-type design for easy mounting and removal of ramps
- Continuous rear mudflap
- 1 pair of lashing points LC 10,000 daN centrally on the platform behind the gooseneck
- 7 pairs of lashing points LC 10,000 daN on outer frame of the platform
- 6 pairs of stake pockets 100 x 50 mm on the outer frame of the platform
- 1 pair of lashing points LC 10,000 daN centrally at the rear of the platform
- 1 pair of stake pocket rails approx. in the middle of the platform
- 1 pair of stake pocket rails on the fixed section
- 1 pair of stake pocket rails behind the last axle
Ramps:
- Hydraulic twin-fold ramps, 2,750+1,500x800 mm
- Larch timber decking
- Operated via remote control (either wired or wireless)
- Ramps with quick-change (removal system)
Chassis:
- BPW ECO Max axle make
- 2 ride heights
- 4 axles, each 10 t (technically 12 t)
- Twin tires 245/70 R17.5
- 2 rigid axles and 2 friction-steered axles
- Reverse steering lock for friction-steered axles via reverse gear
- Brake system make Knorr (in accordance with EU directives with EBS-E)
- TIM G2 by Knorr (Trailer Information Module)
- RSS (Roll Stability Support)
- Load-dependent lift axle on the first axle including starting aid (forced lowering of lift axle via TIM possible)
Accessories:
- 4 wheel chocks with holder
- 2 pairs of warning boards 423 mm x 423 mm, with 2 marker lights and mounting position for beacon, continuously adjustable up to 3,950 mm
- Mounting options on gooseneck and platform (alternatively on ramp, if present) are included
- Insertable bulkhead at the end of the excavator recess
- Electro-hydraulic unit for ramp operation
- Wireless remote control for ramp operation
- Hydraulic stabilizer legs at vehicle rear for support during loading
- 1 pair of additional reversing lights at the rear, activated with reverse gear
- Larch wood extension beams (option)
Malý inzerát
Grevenbroich
972 km
Príves s hákovým nakladačom
Cheval LibertéDebon PW 3.6 3500kg 360x180x35cm Rampen Stützen
Zavolať
Stav: takmer ako nový (použitý), celková hmotnosť: 3 500 kg, dĺžka ložného priestoru: 3 600 mm, šírka ložného priestoru: 1 800 mm, výška ložného priestoru: 350 mm, ANHÄNGERWIRTZ is your online pickup marketplace for new trailers, offering leading brand manufacturers!
- Over 850 new trailers in stock
- More than 130 used trailers always available
Pick up yourself or have it delivered!
Non-binding example: available online here, unregistered, direct from stock while supplies last!
CHEVAL LIBERTE TIPPING TRAILER PW 3.6 ELECTRO PROFESSIONAL RAMPS SUPPORTS 360X180X35 3500KG TOP DEAL
Three-way tipper PW 3.6 Professional 360x180x35cm 3500kg braked tandem axle high loader, low V chassis, 4-sided fold-down profiled aluminium side walls, external lashing hooks, steel sheet on load floor, electro-hydraulic tipping with own battery, aluminium ramps (loadable up to 1800kg) stored in ramp compartment, foldable rear supports, internal lashing loops, automatic jockey wheel...
Online promotion
Many other versions available.
Sales by phone or online in our trailer shop
Onsite only by appointment during our business hours:
Monday to Friday 08:00 - 12:30 & 14:00 - 18:00
Guedsydphdspfx Ap Doc
Content and images are subject to copyright – logos are trademarked
01/26 DEBKIPPW36ELEK3500RAST
Malý inzerát
Göttingen
770 km
Náves s nízkym nakladacím zariadením
MeusburgerMTS 3 - 45 T - 1. Hand
Zavolať
Stav: použitý, pohotovostná hmotnosť: 12 450 kg, maximálna hmotnosť nákladu: 32 550 kg, celková hmotnosť: 45 000 kg, prvá registrácia: 11/2008, dĺžka ložného priestoru: 9 730 mm, šírka ložného priestoru: 2 550 mm, zavesenie: vzduch, farba: oranžová, prevádzková hmotnosť: 12 450 kg, Veľmi dobre zachované vozidlo od prvého majiteľa Meusburger MTS 3 - 45T
Trojosový nájazdový nízkoložný príves s najazdovou rampou
Ťažká preprava
Guodpfxjwb Sh As Ap Dsc
Typ MTS 3
Maximálna povolená celková hmotnosť - 45 000 kg
Užitočné zaťaženie - 32 550 kg
Dĺžka - 13 900 mm
Šírka - 2 500 mm
Vzduchové odpruženie
Uľahčujeme vám vyhľadávanie: "mini kolesový nakladač s nízkym nakladačom + zimný balík"
Okamžite a bezplatne dostanete nové ponuky e-mailom.
Vyhľadávaciu úlohu môžete kedykoľvek jednoducho ukončiť.







































































































































































































































































































