Náves s nízkym nakladacím zariadením

Faymonville MAX Trailer 4-Achs-Jumbo-Semi mit Plane

Gooseneck:
Gooseneck with rear chamfer approx. 750 mm x 10°
3 pairs of lashing rings
30 mm thick hardwood flooring
Loading platform:
5 pairs of folding lashing rings on the outside
3 pairs of folding lashing rings on the outside
1 pair of horizontal lashing rings at the front of the loading platform
Cutouts in the outer frame of the loading platform for attaching tie-down straps
Approx. 48 mm thick hardwood flooring, over the axles with checker plate covering
Landing gear:
JOST landing legs with 2-speed gearbox for 24 t lifting capacity
Axles and tyres:
BPW axles, two fixed and two self-steering axles, air suspension, drum brakes, with raise/lower function
Fodpstphtmsfx Adlegi
The self-steering axles can be locked for reversing via electromagnet, activated through reverse gear or manually
Axle tools
Tyres 205/65 R17.5 3PMSF
Braking system:
WABCO braking system according to EU regulations with EBS-E
Steel construction:
High-strength fine grain steel frame
Steel grades:
S355J2+N/S355MC
S690QL/S700MC
Electrical equipment:
Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK
ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets
Connection in accordance with ISO
Paintwork:
Premium, durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component zinc dust primer
High-quality 2-component top coat, single color in MB 7350 Novagrau
Metallic paint not available
Rear section metallized and painted in RAL 9010
Standard equipment included:
1 spare wheel 205/65 R 17.5
TPMS tire pressure monitoring system in accordance with ECE R 141
At the galvanized front connection strip: yellow-red air couplings
4 wheel chocks with brackets on the front wall
Mounting at the rear of the gooseneck for ALU loading ramps
Galvanized folding supports underneath the sloped section of the loading area
One bracket for a rotating beacon at the rear of the trailer
Height-adjustable curtain structure
Galvanized front wall with a tensioning mechanism for the sliding curtains
Adjustable height approx. 400 mm
"EDSCHA" brand roof, forward-sliding on ALU roof beam profiles, bolted to front and rear walls
3 pairs of sliding stanchions on the loading area
The superstructure can be hydraulically extended at the rear left and right by approx. 750 mm
Sliding roof with lift-up portal beam
Sliding curtain with 700 mm extra length, with tensioning straps approx. every 600 mm
Height to top edge of superstructure approx. 3,960 mm
Driving with open sliding roof is not permitted and will cause damage to the curtain
Hanger bar for ALU loading ramps at the rear of the vehicle
On the gooseneck and on the left and right of the rear panel, each with a bracket for warning signs including socket
Mudflap at the rear of the trailer
European reflective plates at the rear of the trailer
7 pairs of stake pockets for 100 x 50 mm insertable stakes in the outer frame of the loading platform
Lifting axle on the front axle controlled by TEBS E depending on current axle load and loading condition
Superstructure at the rear with closed ALU swing doors
On the checker plate on the gooseneck and loading area, an integrated sand coating to prevent slipping
Central lubrication system BEKAMAX with standard grease NLGI-2 and removable pump guard
80 km/h speed stickers at the rear and on both sides
Load gauge for axle load determination including load diagram

Inzercia bola automaticky preložená a vyskytli sa nejaké chyby prekladu.