Náves s nízkym nakladacím zariadením

Goldhofer 4-Achs-Tele-Semi mit hydr. Doppelklapprampen

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, číslo stroja/vozidla: WGOTHPE4560028329, celková hmotnosť: 102 000 kg, zavesenie: hydraulika, farba: žltá, Rok výroby: 2006, Goldhofer STHP-XLE 6 (2+4) with Excavator Deck / Lowbed Location: D - 73230 Kirchheim unter Teck Technical data according to original TÜV certificate: - Maximum speed: 80 km/h - Fifth-wheel load: 30,000 kg - Front axle load: 2 x 12,000 kg - Rear axle load: 4 x 12,000 kg - Total weight of semi-trailer: 102,000 kg (with 30,000 kg fifth-wheel load) - Unladen weight STHP-XLE 4 (0+4): 21.30 t / 23.50 t (incl. accessories) - Unladen weight STHP-XLE 6 (2+4): 26.70 t / 28.90 t (incl. accessories) Combination consisting of: GOOSENECK - Type XLE (Universal) - Weight: 4,500 kg - Maximum fifth-wheel load: 30,000 kg - King pin: 3.5" - Design for direct mounting of the excavator deck or coupling the 2-axle bogie - Central lubrication Beka-Max 2-AXLE BOGIE - Type XLE - Weight: 5,300 kg - Axle line load: 12,000 kg (80 km/h) - Axle manufacturer: BPW - Tires: 285/70 R19.5 - Chassis width: 2,750 mm - Loaded loading height: approx. 1,240 mm (+/- 300 mm) - Central lubrication Beka-Max EXCAVATOR DECK / LOWBED DECK - Payload: 67.75 t - Extendable from 6,000 to 14,000 mm - Central tube securely mounted on rear 4-axle bogie Dujdjwzl Nmjpfx Ag Tsn - Claw coupling at the front - Central tube width: 1,350 mm - Inner tube width: 600 mm - Construction height: 440 mm - Loaded loading height: 650 mm (ground clearance 210 mm) - Adjustable width from 2,750 to 3,250 mm - Sliding tables (weight: 405 kg) - Folding widening floors (weight: 1,955 kg) 4-AXLE BOGIE - Type XLE - Weight: 16,110 kg including excavator deck - Axle line load: 12,000 kg (80 km/h) - Axle manufacturer: BPW - Tires: 285/70 R19.5 - Chassis width: 2,750 mm - Excavator shovel recess: 700 mm - Loaded loading height: approx. 1,140 mm (+400/-200 mm) - Central lubrication Beka-Max Good condition – German vehicle from first owner – available at short notice from stock in Kirchheim unter Teck – further information on request.

Stav: nový, maximálna hmotnosť nákladu: 49 000 kg, celková hmotnosť: 60 800 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 r 17.5, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck with chamfered front corners at 45° and rear chamfer of approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable Loading Area: - Extendable loading area with rear chamfer of approx. 1,000 mm x 8° - 5 pairs of fold-out lashing rings on the outside (LC 5,000 daN) - 3 pairs of fold-out lashing rings on the outside (LC 10,000 daN) - 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) - Cut-outs in the external frame of the loading area for attaching tie-down straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, with chequered plate covering over the axles Detachable Two-Part Ramps: - One pair of galvanized, two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood overlay - Ramps with hydraulically folding ramp sections, hydraulic lift and hydraulically adjustable side shift - Max. load per pair: 40,000 kg Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and Tyres: - BPW axles, two rigid axles, two self-steering axles, air-suspended, with drum brakes, lifting/lowering function - The self-steering axles can be locked via electromagnetic reverse lock through reverse gear or manually - Axle tools Duedpfx Ageh Etf Ro Ten - Tyres: 235/75 R 17.5 Brake System: - Brake system in accordance with EU regulations with EBS-E (4S3M) Steel Construction: - Steel construction made from high-strength fine-grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Paintwork: - Premium and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc-rich primer - High-quality 2-component (2K) topcoat in single-tone Novagrey Electrical System: - Electrical system according to EU regulations, ASPÖCK-NORDIK (ASS3) 24 Volt lighting - ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets Included Accessories: - 2" king pin - One galvanized steel front wall, approx. 400 mm high - One spare wheel with holder in front of the front wall - Yellow and red air couplings on galvanized front terminal strip - 4 wheel chocks with holder on the front wall - Mounting at the rear of the gooseneck for ALU approach ramps - Galvanized folding supports under the chamfered loading area - Bracket for a rotating beacon - Cover plates to bridge the gap between ramps and loading area - White reflective tape according to EU regulations on the sides, red at the rear and on the extension - Electro-hydraulic power unit - At the gooseneck and on the ramps, left and right, each with mounting for warning panels including socket - Control valves for the ramps mounted on the right side of the semi-trailer - Mudflap at the rear of the trailer - User manual and description on USB stick - Removable ALU side boards and rear panel on the gooseneck, approx. 2,440 x 400 mm - Rear galvanized stanchions removable (body length approx. 2,560 mm) - 4 pairs of WADER container pockets in the loading area for a 20 ft, 2x 20 ft or a 40 ft container - 7 pairs of stake pockets for 100 x 50 mm stakes in the external frame of the loading area - Extensions, galvanized, retractable by approx. 230 mm per side - Lift axle on the front axle with control - 20 x 20 mm square climbing strips - BEKAMAX central lubrication system - Four warning panels extendable by approx. 400 mm (approx. 423 x 423 mm)

Stav: pripravené na použitie (použité), Funkcionalita: plne funkčný, pohotovostná hmotnosť: 6 500 kg, maximálna hmotnosť nákladu: 31 500 kg, celková hmotnosť: 38 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 10/2008, objem nakladacieho priestoru: 27 m³, zavesenie: vzduch, veľkosť pneumatiky: 385.65 r 22.5, farba: biely, Rok výroby: 2008, Výbava: ABS, Použitý sklápací náves Tecnokar, objem 27 m3, 3 jednoduché nápravy s kotúčovými brzdami, 1. náprava zdvíhateľná a riaditeľná, pneumatické odpruženie, ABS, okrúhla korba z ocele s hrúbkou dna 5 mm a stien 4 mm, elektrická plachta Cramaro s PVC, výklopné zadné dvere s pneumatickými zámkami, zadný finišer, predný valec s dvojitými hydraulickými prípojkami, rok výroby 2008, STK platná do 31.03.2026. PREDAJCA: INTERDRIVE SRL-PARMA. Djdpfx Agoxnqcps Teun

Stav: nový, pohotovostná hmotnosť: 9 400 kg, maximálna hmotnosť nákladu: 29 600 kg, celková hmotnosť: 39 000 kg, dĺžka ložného priestoru: 13 800 mm, šírka ložného priestoru: 2 550 mm, výška ložného priestoru: 850 mm, zavesenie: vzduch, veľkosť pneumatiky: 245/70 R 17.5, Výbava: ABS, NOVÝ, 3-nápravový podvalník Saf, 3. náprava riaditeľná, skrinka na náradie na krku, držiak rezervného kolesa, zadné dvojité hydraulické rampy 4000 x 800 mm s manuálnym priblížením, 3+3 kotviace oká RUD s certifikáciou na 10 ton namontované na 6+6 otvoroch, 2+2 kotviace oká CARTEC s certifikáciou na 8 ton na vyššej plošine, výška nízkej ložnej plochy 850 mm, dĺžka nízkej ložnej plochy 10 030 mm. Dujdpfxov Upfye Ag Ton

Stav: veľmi dobrý (použitý), najazdené kilometre: 514 000 km, výkon: 368 kW (500,34 k), prvá registrácia: 09/2018, typ paliva: nafta, veľkosť pneumatiky: 385/65R22.5, konfigurácia náprav: 6x4, rázvor náprav: 3 000 mm, palivo: nafta, kapacita palivovej nádrže: 330 l, brzdy: brzdenie motorom, farba: modrá, kabína vodiča: spacia kabína, typ prevodu: automatický, počet prevodových stupňov: 12, emisná trieda: Euro 6, zavesenie: vzduch, Rok výroby: 2018, Výbava: AdBlue, tempomat, = Further Options and Accessories = - Power brake booster - Refrigerator - Sleeper cab - Toolbox = Notes = Transmission: Automatic Number of gears: 12 Transmission model: Volvo I-Shift / Automatic / 12 Gears / 2600 Nm Color: Blue Wheelbase: 300 cm Payload capacity: 70,000 kg Manufacturer: Volvo Model: FH13 500 hp 6x4 VIN: YV2RT40D0JA825417 Year of manufacture: 2018 Odometer: 514,000 km Engine: 500 HP / Diesel 12.8 l / EURO 6 / SCR + EGR / VEB+ Transmission: Volvo I-Shift / Automatic / 12 gears / 2,600 Nm 1st axle: 8,000 kg / Air suspension / 385/65R22.5 2nd axle: 10,500 kg / Air suspension / driven / 315/70R22.5 3rd axle: 10,500 kg / Air suspension / driven / 315/70R22.5 Wheelbase: 3,000 mm Axle ratio: i = 2.83 Curb weight: 9,600 kg GVW: 29,000 kg GCW: 70,000 kg Equipment: 330 L fuel tanks AdBlue tank, 65 L 24-volt electrical system Jost JSK 2-inch fifth wheel Pneumatically operated sliding fifth wheel Main battery switch Work lights Toolboxes between the rear wheels Tandem lift Frame cover Cabin: FH Globetrotter sleeper cab Lane keeping assist Adaptive cruise control Forward collision warning & emergency braking Coffee machine Roof hatch 2 x Bed Comfort leather seats Special interior Refrigerator Storage boxes Engine and cab parking heater Radio CD player / Bluetooth = Further Information = General Information Usable material: Floor Technical Information Engine displacement: 12,777 cc Transmission Transmission: I-Shift, 12 gears, automatic Axle configuration Suspension: Air suspension Front axle: Tire size: 385/65R22.5; Max. axle load: 8,000 kg; Steered Rear axle 1: Tire size: 315/70R22.5; Twin tires; Max. axle load: 10,500 kg Rear axle 2: Tire size: 315/70R22.5; Twin tires; Max. axle load: 10,500 kg Weights Unladen weight: 9,600 kg Payload: 70,000 kg Duedeuu E Sfopfx Ag Tsn Gross vehicle weight: 29,000 kg Functional Body manufacturer: Volvo Condition Technical condition: very good Optical condition: very good Damages: None Financial Information Price: On request Further Information Please contact Stefan Schaapveld for more information.

Stav: nový, maximálna hmotnosť nákladu: 31 500 kg, celková hmotnosť: 42 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2025, Výbava: ABS, Wiese 3-axle semi-trailer with lift table and folding rear section. Perfect for transporting forklifts and/or work platforms. Technical specifications: - 3 x 10 t axles - Lift axle - Steering axle with Smart Steering (steers both forward and backward) - Outer beam chassis with inclined frame - Neck construction rated for 18 t, suitable for 2- and 3-axle tractor units - Hydraulic lift table adjustable to 3 positions - Rear in folding tail design with hydraulic extensions, usable as drive-on ramps, bridging ramp, or loading platform (overall length reduced with rear upright) - Remote control for ramps and lift table - Front wall - Grating floor - Numerous lashing points - SmartBoard - Central lubrication system - Steel construction, shot-blasted, hot-dip galvanized and painted Various optional extras available: For example: - Winch Dujdpfx Agevw Hmtj Ton - Toolbox on fifth wheel step - Alloy wheels Further information on request.

Stav: nový, pohotovostná hmotnosť: 10 700 kg, maximálna hmotnosť nákladu: 38 800 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 r 17,5, farba: sivo-čierny, Výbava: ABS, Gooseneck: •Gooseneck with beveled front corners at 45° and rear chamfer approx. 750 mm x 10° •3 pairs of lash rings •30 mm thick hardwood decking Extendable Load Platform: •Extendable load platform with rear chamfer approx. 1,000 mm x 8° •Cut-outs in the outer frame of the load platform for attaching lashing straps •Approx. 48 mm thick hardwood decking, over the axles with chequer plate covering Two-piece Steel Ramps: •One pair of galvanized, two-piece steel ramps with approx. 48 mm thick hardwood covering •Ramps with hydraulically foldable ramp sections, hydraulic lifting system, and hydraulic lateral adjustment •Maximum capacity per pair: approx. 40,000 kg Axles and Tyres: •BPW axles and suspension, 2 rigid axles, 1 trailing steering axle •Technical axle load: 12,000 kg •Electromagnetic reverse lock, activated via reverse gear and manually •Air suspension with lift and lower valve •Axle tools •235/75 R 17.5 3PMSF Braking System: •WABCO braking system according to EU regulations with EBS-E Paintwork: •First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component zinc dust primer •High-quality, single-tone 2-component topcoat in MB 7350 Novagrau •Rear section metalized and painted in RAL 9010 Landing Legs: •JOST landing gear with 2-speed gearbox for 24 t lifting capacity (50 t test load). Steel Construction: •Steel construction made from high-strength fine-grained steels •Steel grades: •S355J2+N/S355MC •S690QL/S700MC Electrical System: •Electrical system complying with EU regulations, 24 volt lighting •ASPÖCK-UNIBOX on the front connection board with 24N, 24S & 15-pin sockets Duedpfehlz S Njx Ag Ten Accessories Included: •One spare wheel with holder •One galvanized steel front wall approx. 400 mm high •Yellow-red air couplings on the galvanized front connection board •4 wheel chocks •A holder for a warning beacon at the rear of the trailer •Recess in the rear gooseneck area for ALU approach ramps •Galvanized folding supports under the chamfer of the load platform •Cover plates to bridge the gap between the ramps and the load platform •White reflective tape as per EU regulations on the sides, extension, and rear (red) •Electro-hydraulic unit at the rear, under the load platform •One holder each on the gooseneck and on each ramp, left and right, for warning signs incl. socket •Ramp control valves mounted on the right-hand side of the trailer •On the gooseneck, ALU side and rear boards approx. 2,440 x 400 mm •Rear galvanized plug-in stakes are removable (body length approx. 2,560 mm) •Four warning panels, extendable by approx. 400 mm, each with a position light •3 pairs of WADER container pockets in the platform for a 20ft, 30ft, or 40ft container •6 pairs of stake pockets (100x50 mm) in the outer frame of the load platform •Galvanized extensions, extendable by approx. 230 mm per side •20 x 20 mm square toehold strips every 200 mm on the outer frame of the platform chamfer •Sanded surface finish painted on the chequer plates, king pin, and load platform as anti-slip protection •Load gauge for determination of axle loads, including load diagram •HRM metallization (High Resistance Metallisation) of the outer frame •Complete steel structure shot-blasted, then the defined visible areas metallized with ZINACOR 850 (zinc 85% - aluminium 15%) by hot finish

Stav: nový, maximálna hmotnosť nákladu: 38 100 kg, celková hmotnosť: 50 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 100 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 760 mm, zavesenie: vzduch, veľkosť pneumatiky: 205/65 R17.5 3PMSF, farba: sivý, Výbava: ABS, Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading platform: 5 pairs of folding lashing rings on the outside 3 pairs of folding lashing rings on the outside 1 pair of horizontal lashing rings at the front of the loading platform Cutouts in the outer frame of the loading platform for attaching tie-down straps Approx. 48 mm thick hardwood flooring, over the axles with checker plate covering Landing gear: JOST landing legs with 2-speed gearbox for 24 t lifting capacity Axles and tyres: BPW axles, two fixed and two self-steering axles, air suspension, drum brakes, with raise/lower function The self-steering axles can be locked for reversing via electromagnet, activated through reverse gear or manually Axle tools Tyres 205/65 R17.5 3PMSF Braking system: WABCO braking system according to EU regulations with EBS-E Steel construction: High-strength fine grain steel frame Steel grades: S355J2+N/S355MC S690QL/S700MC Electrical equipment: Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets Connection in accordance with ISO Paintwork: Premium, durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component zinc dust primer High-quality 2-component top coat, single color in MB 7350 Novagrau Metallic paint not available Rear section metallized and painted in RAL 9010 Standard equipment included: 1 spare wheel 205/65 R 17.5 TPMS tire pressure monitoring system in accordance with ECE R 141 At the galvanized front connection strip: yellow-red air couplings 4 wheel chocks with brackets on the front wall Mounting at the rear of the gooseneck for ALU loading ramps Galvanized folding supports underneath the sloped section of the loading area One bracket for a rotating beacon at the rear of the trailer Height-adjustable curtain structure Galvanized front wall with a tensioning mechanism for the sliding curtains Adjustable height approx. 400 mm "EDSCHA" brand roof, forward-sliding on ALU roof beam profiles, bolted to front and rear walls 3 pairs of sliding stanchions on the loading area The superstructure can be hydraulically extended at the rear left and right by approx. 750 mm Sliding roof with lift-up portal beam Sliding curtain with 700 mm extra length, with tensioning straps approx. every 600 mm Height to top edge of superstructure approx. 3,960 mm Driving with open sliding roof is not permitted and will cause damage to the curtain Duodpstphtmjfx Ag Tsn Hanger bar for ALU loading ramps at the rear of the vehicle On the gooseneck and on the left and right of the rear panel, each with a bracket for warning signs including socket Mudflap at the rear of the trailer European reflective plates at the rear of the trailer 7 pairs of stake pockets for 100 x 50 mm insertable stakes in the outer frame of the loading platform Lifting axle on the front axle controlled by TEBS E depending on current axle load and loading condition Superstructure at the rear with closed ALU swing doors On the checker plate on the gooseneck and loading area, an integrated sand coating to prevent slipping Central lubrication system BEKAMAX with standard grease NLGI-2 and removable pump guard 80 km/h speed stickers at the rear and on both sides Load gauge for axle load determination including load diagram

Stav: nový, maximálna hmotnosť nákladu: 36 020 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 540 mm, zavesenie: vzduch, veľkosť pneumatiky: 435/50 R 19.5, farba: sivý, Výbava: ABS, Loading Platform: - Loading platform with extendable design featuring pneumatically operated locking system - 2 pairs of lashing rings (LC 5,000 daN) - 1 pair of lashing rings (LC 10,000 daN) - 6 pairs of outward-folding lashing rings (LC 5,000 daN) - 2 pairs of outward-folding lashing rings (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for attaching tensioning straps Axles and Tyres: - BPW axles, air-suspended, with disc brakes (377 mm), equipped with lifting/lowering function - Self-steering axles with electromagnetic reverse lock, activated via reverse gear or manually - Axle tools - Tyres 435/50 R 19.5 Brake System: - Brake system in accordance with EU regulations with EBS-E (2S2M) Paintwork: - Premium, long-lasting corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer - High-quality single-tone 2-component (2K) topcoat in Novagrau - Rear section metallized and painted in RAL 9010 (Pure White) - Metallic paint finish not possible Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Steel Construction: - Steel construction made from high-tensile fine-grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical System: - Electrical system compliant with EU regulations, lighting 24 Volt ASPÖCK-NORDICK (ASS3) - ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets - Connection as per ISO - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Djdpfx Agji Dwlws Teun Included Accessories: - Yellow-red air couplings on the galvanized front connection bar - 2 wheel chocks with holder - 2" kingpin - A galvanized steel front wall, approx. 1,600 mm high - Yellow reflector tape in accordance with EU regulations on the sides, extension section, and rear of the trailer - European reflector plates (Red-Yellow) at the rear of the trailer - Loading platform with approx. 38 mm thick hardwood flooring - 10 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the platform - 1 spare wheel holder under the loading platform on the right-hand side in the direction of travel - Manual and description on USB stick - 1 mudflap at the rear of the trailer - 1 bracket for a beacon at the rear of the trailer - On the gooseneck and the rear plate, left and right, each with bracket for warning signs including socket - 1 INOX toolbox mounted crosswise under the platform (1,000 x 400 x 2,500mm) - 6 pairs of WADER container pockets in the platform, for 1x 20ft container, 2x 20ft containers or 1x 40ft container; an additional locking point is provided in the extension section for a 45ft container - 3 pairs of stake pocket strips, mounted transversely in the platform, for plug-in stakes 100 x 50 mm - 60 km/h speed sticker at the rear - 2 reversing spotlights mounted on the rear plate - Four warning signs extendable by approx. 400 mm (approx. 423 x 423 mm) each with a position lamp - Bracket for beacon on the warning signs - HRM metallization (High Resistance Metallization) of the outer frame - Complete steel construction shot-blasted, then all defined visible surfaces metallized and hot-finished with ZINACOR 850 (85% zinc – 15% aluminium)

Stav: nový, pohotovostná hmotnosť: 13 250 kg, maximálna hmotnosť nákladu: 47 550 kg, celková hmotnosť: 60 800 kg, konfigurácia náprav: 3 nápravy, zavesenie: vzduch, veľkosť pneumatiky: 245/70 r17.5, farba: sivý, Výbava: ABS, Gooseneck: Gooseneck with rear chamfer of approx. 750 mm x 10°. 3 pairs of lashing rings 30 mm thick hardwood flooring Extendable loading platform: Extendable loading platform with rear chamfer of approx. 1,000 mm x 8° 5 pairs of hinged lashing rings (can be folded outward) 3 pairs of hinged lashing rings (can be folded outward) 1 pair of horizontal lashing rings at the front of the loading platform Cutouts in the outer frame of the loading platform for hooking in tensioning straps Hardwood floor approx. 48 mm thick, anti-slip checker plate over the axles Two-part steel ramps: One pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood overlay. Ramps with hydraulically extendable and retractable ramp sections, hydraulic lifting device, and hydraulically adjustable. Maximum load capacity per pair: 40,000 kg Landing legs: JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test capacity) Axles and tires: BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanical forced steering Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tools Tires: 245/70 R 17.5 Brake system: Brake system compliant with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit Steel construction: Steel construction made of high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Paintwork: Top-quality, durable corrosion protection of the standard shot-blasted welded frame guaranteed by a two-component (2K) zinc-rich primer High-quality single-color 2-component (2K) top coat in Nova Grey Rear section metalized and painted in RAL 9010 (pure white) No metallic paints possible Electrical system: Electrical system according to EU specifications, 24 volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets Connection as per ISO 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Accessories included: 2" kingpin Galvanized steel front wall approx. 400 mm high Yellow-red air couplings on the galvanized connection bar at the front 4 wheel chocks with holder at the front wall Dodpfx Agjl Uxdkj Toun One spare wheel with holder in front of the front wall Electro-hydraulic power pack Remote steering from front and rear via cable remote control with push-button operation and single trace axle control Mount at the rear of the gooseneck for ALU loading ramps European reflective panels (red-yellow) at the rear of the trailer White reflective striping according to EU regulations at the side, at the extension element, and rear in red On the gooseneck and ramps left and right, each with one bracket for warning signs including socket A bracket for a revolving beacon at the rear of the trailer Galvanized folding supports under the chamfer of the loading area Control valves for ramps mounted on the right side of the trailer Cover plates for bridging the gap between ramps and loading area One mudflap at the rear of the trailer Manual and documentation on USB stick Central lubrication system BEKAMAX (Pico) with standard NLGI-2 grease and removable pump guard On the gooseneck, removable ALU side boards and rear board approx. 2,440 x 400 mm Rear galvanized removable stanchions, body length approx. 2,560 mm A toolbox INOX 1,350x400x400 on the gooseneck, box covers oil fill 4 pairs of WADER container locks in the loading platform for one