Faymonville 4-1+3-Achs-Tele-Semi-Radmulden-Rampen kúpiť použité (65 708)

Stav: použitý, pohotovostná hmotnosť: 14 350 kg, maximálna hmotnosť nákladu: 48 650 kg, celková hmotnosť: 63 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 800 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Rok výroby: 2025, Výbava: ABS, With every used semi-trailer, you will receive a current and complete inspection and functionality report. Gooseneck: - Gooseneck in SNT design to optimize the loading deck length, length approx. 3,700 mm - Gooseneck rear with bevel approx. 1,000 mm x 10° Loading deck: - Telescopic loading deck, length approx. 8,800 mm, with rear bevel approx. 500 mm x 10° - Recess in the loading deck, including into the bevel, for accommodating the excavator dipper stick Ramps: - 1 pair of two-part steel ramps, each approx. 4,350 mm long and approx. 900 mm wide - Ramps with hardwood covering - Hydraulically foldable ramp tips - Each ramp can be hydraulically shifted approx. 235 mm outwards and approx. 215 mm inwards - Square anti-slip bars 20 x 30 mm, approx. every 200 mm on the outer frame of the ramp Axles and Suspension: - BPW axles and suspension, 1st axle with forced steering, all other axles with hydromechanical forced steering - Technical axle load: 12,000 kg - 1st axle with electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with raise and lower valve - Tires: 235/75 R 17.5 - TPMS tire pressure monitoring system Accessories included: - Plug-in steel front wall, approx. 400 mm high - 3kW electro-hydraulic unit for controlling the hydraulic functions, excluding hydraulic cable winches - Parking position on the gooseneck for warning boards when not in use - 1 spare wheel - Outer side rail of the gooseneck with mounting holes for bolted lashing rings - First hole approx. 200 mm from the front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - 1 pair of horizontal lashing rings at the rear of the gooseneck - On the gooseneck, 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized - On the gooseneck, 1 plug-in ALU rear wall, approx. 400 mm high, anodized - Over the gooseneck approx. 40 mm thick hardwood floor, over the kingpin checker plate covering - 2" kingpin - Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide - Round NATO socket on the front connection panel - 4 wheel chocks - Mechanical landing gear with 2-speed gearbox and crank - Continuous 50 mm hardwood flooring on the loading deck, interrupted between the axles - Deck locking using conically welded locking profiles every 250 mm - Incl. pre-tensioning plate - 1 intermediate table, approx. 300 mm wide, for the telescopic tubes with large cross-section; intermediate table with stepped deck and extendable support rails for ALU bridging elements Itedoyrfn Nepfx Ad Ajf - 1 pair of lashing rings on the front cross-member - 8 pairs of recessed lashing rings in the outer frame of the loading deck, foldable outward - Extendable (galvanized) deck widenings approx. 230 mm per side - Wheel recesses with square anti-slip bars, 15 x 15 mm, continuously open in front of the axles up to the gooseneck cross-member, approx. 700 x 410 mm - ALU covers for the wheel recesses, which can also be used as bridging or widening planks for the telescopic section - ALU elements lockable on the telescopic tubes of the extensions - Widenable U-profiles for holding ALU covers - Wheel recesses with square anti-slip bars, 15 x 15 mm between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm - 1st axle with automatic lift axle function - 4 warning boards, approx. 423 x 423 mm - Radio and cable remote control

Stav: použitý, pohotovostná hmotnosť: 15 550 kg, maximálna hmotnosť nákladu: 47 450 kg, celková hmotnosť: 63 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 11/2024, dĺžka ložného priestoru: 8 800 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, Rok výroby: 2024, Výbava: ABS, For every used semi-trailer, you receive a current and complete inspection and functionality report. Gooseneck: - Gooseneck in SNT design for optimization of loading platform length, length approx. 3,700 mm - Gooseneck rear with bevel, approx. 1,000 mm x 10° Loading Platform: - Extendable loading platform, length approx. 8,800 mm, with rear bevel approx. 500 mm x 10° - A recess in the platform and in the bevel to accommodate the excavator bucket stick - Pneumatic locking system with conical locking bolts and reinforced locking positions - Hardwood covering on the platform bevel Iedpfx Aoypb Aksd Astf Ramps: - 1 pair of two-part steel ramps, approx. 4,350 mm long and approx. 900 mm wide - Ramps with hardwood covering - Hydraulically foldable ramp tips - Ramps can be hydraulically shifted individually approx. 235 mm outwards and approx. 215 mm inwards - 20 x 30 mm square climbing bars at intervals of approx. 200 mm on the outer frame of the ramp Axles and Suspension: - BPW axles and suspension, 1st axle self-steering, all other axles hydromechanically forced-steered - Technical axle load: 12,000 kg - Air suspension - Tires 235/75 R 17.5 - TPMS tire monitoring system - TPMS tire monitoring sensors Included accessories: - Plug-in steel front wall, approx. 400 mm high - 3kW electro-hydraulic unit for controlling hydraulic functions - 1 spare wheel - Outer beam on the gooseneck with mounting holes for bolt-on lashing rings - First hole approx. 200 mm from the front, thereafter approx. every 400 mm - 2 pairs of screw-in lashing rings included - 1 pair of flat lashing rings in the rear area of the gooseneck - On the gooseneck 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized - On the gooseneck, one plug-in ALU rear board, approx. 400 mm high, anodized - 2" king pin - Round NATO socket on the front connection rail - 4 wheel chocks - Mechanical landing legs with 2-speed gearbox and crank - 1 intermediate table, approx. 300 mm wide - 1 pair of lashing rings on the front cross member - 8 pairs of recessed lashing rings in the outer frame of the loading platform, foldable outwards - Extendable (galvanized) extensions by approx. 230 mm per side - Wheel recesses with square climbing bars, 15 x 15 mm, continuously open in front of the axles up to the crossmember of the gooseneck, approx. 700 x 410 mm - ALU covers for the wheel recesses - Lockable aluminum elements mounted on the extension tubes of the widening sections - Widenable U-profiles for placing the ALU covers - Wheel recesses with square climbing bars, 15 x 15 mm between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm - Lockable aluminum elements mounted on the extension tubes of the widening sections - 1 pair of mechanical rear supports - Remote steering from front and rear via cable remote, with single-track axle monitoring - 1st axle with automatic lift axle function and starting aid according to EU Directive 2021/535 - Under the gooseneck and on the rear crossmember left and right, each with a 7-pin socket with bracket for warning plates - Square climbing bars 20 x 30 mm, approx. every 200 mm on the outer frame of the platform bevel - Central lubrication system with 1 pump, brand BEKAMAX - Radio remote control for remote steering operation, in addition to cable remote - Wabco Smart Board System - 4 warning plates, approx. 423 x 423 mm, extendable by approx. 400 mm

Stav: nový, pohotovostná hmotnosť: 15 550 kg, maximálna hmotnosť nákladu: 47 450 kg, celková hmotnosť: 63 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 800 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck in SNT design for optimizing loading area length, approx. 3,700 mm long - Rear gooseneck with approx. 1,000 mm x 10° bevel Loading Area: - Extendable loading area, approx. 8,800 mm in length, with an approx. 500 mm x 10° bevel at the rear - A recess in the loading area and the bevel, designed to accommodate the excavator stick - Pneumatic locking with conical locking bolts and reinforced locking positions - Hardwood decking on the beveled section of the loading area Ramps: - 1 pair of two-part steel ramps, approx. 4,350 mm long and 900 mm wide - Ramps with hardwood decking - Hydraulically foldable ramp ends - Each ramp hydraulically adjustable outwards by approx. 235 mm and inwards by approx. 215 mm - Square climbing bars 20 x 30 mm, positioned approx. every 200 mm on the outer frame of the ramp Axles and Suspension: - BPW axles and suspension, 1st axle steering ahead, all other axles hydromechanically forced steered - Technical axle load: 12,000 kg - 1st axle with electromagnetic reverse lock, activated via reverse gear and also manually - Air suspension with lift and lower valve - Twin tires 235/75 R 17.5 - TPMS tire pressure monitoring system according to ECE R141 - TPMS sensors mounted on all wheels including spare wheels Accessories included: - Plug-in steel front wall, approx. 400 mm high - 3kW electro-hydraulic power unit for hydraulic operations, excluding hydraulic winches - Parking location on the gooseneck for warning panels when not in use - 1 spare wheel - On the gooseneck: 1 pair of plug-in anodized ALU side boards, approx. 400 mm high - Plug-in anodized ALU rear board on the gooseneck, approx. 400 mm high - On the gooseneck: approx. 40 mm thick hardwood decking, over the kingpin tread plate covering - 2" kingpin - Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide - 4 wheel chocks - Mechanical landing gear with 2-speed gearbox and crank - JOST Modul B – static test load = 50,000 kg - 1 intermediate table, approx. 300 mm wide - Extendable galvanised outriggers, approx. 230 mm per side - Wheel recesses with square climbing bars - ALU covers for the wheel recesses - 1 pair of mechanical rear supports - Remote steering system operable from the front and rear via cable remote control, with single-track control for axles - 1st axle with automatic lift axle function Iedpfx Adek Aht Uj Aotf - Central lubrication system with 1 pump, brand BEKAMAX - Radio remote control for rear steering, additional to the cable remote, with 2 indicator lights on receiver for single-track control - Wabco Smart Board System - 4 warning panels, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and brackets for rotating beacon

Stav: nový, pohotovostná hmotnosť: 13 500 kg, maximálna hmotnosť nákladu: 51 500 kg, celková hmotnosť: 69 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 800 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 r17.5, farba: sivý, Výbava: ABS, Gooseneck: Gooseneck in SNT design for optimizing the loading platform length; length approx. 3,700 mm. Gooseneck rear bevel approx. 1,000 mm x 10°. Loading platform: Telescopic loading platform, length approx. 8,800 mm, with rear bevel approx. 500 mm x 10°. Recess in the bevel as well as extending into the loading platform to accommodate the excavator's bucket linkage. Pneumatic locking with conical bolt and reinforced lock positions. Supply lines are protected within the telescopic beam and adapt to the respective platform length. Ramps: 1 pair of two-part steel ramps, approx. 4,350 mm x 900 mm. Hydraulically folding ramp tips. Iodpsk Ahugsfx Ad Astf Each ramp can be hydraulically shifted approx. 235 mm outward and approx. 215 mm inward. Axles and suspension: BPW axles and suspension, two rigid axles, two self-steering axles. Electromagnetic reverse lockout, activated via reverse gear and manually. Air suspension with raise/lower valve. Axle tools. Tyres: 235/75 R17.5 3PMSF, dual-mounted. Load index: 143/141J (144/144F). Braking system: WABCO brand braking system, EBS-E, compliant with EU regulations. Lighting system: 24-volt lighting system in "ASPÖCK-NORDIK full LED." Metal finishing: Standard HRM metallization of the outer frame. Complete steel structure shot-blasted, then all defined visible surfaces hot-coated with ZINACOR 850 (zinc 85% - aluminum 15%). Steel structure: Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Welders certified to DIN-EN 287-1. MAG welding method according to EN ISO 4063. Protective gas M21 according to EN ISO 14175. Standard accessories included: Removable front wall, steel, height approx. 400 mm. ASPÖCK-UNIBOX at the front connection strip with 24N, 24S, & 15-pin sockets. 24N connection per ISO-118524S connection per ISO-373115-pin connection per ISO-12098. Round NATO socket at the front connection strip. Power cable for supplying the electro-hydraulic unit and/or electric winch (35 mm², 3.5 m long) between trailer and truck tractor with connector (NATO-NATO). 3 kW electro-hydraulic unit for operating hydraulic functions, except hydraulic winches. 1 spare wheel with mounting adapter. External beam of gooseneck with fixing holes for bolted lashing rings; first hole approx. 200 mm from the front, then every approx. 400 mm. 2 pairs of screw-in lashing rings included. Fixing hole at the upper rear of the gooseneck external beams for a bolted lashing ring. 1 pair of screw-in lashing rings. Approx. 40 mm thick hardwood flooring over the gooseneck. On the gooseneck, 1 pair of removable, anodized aluminum sideboards, approx. 400 mm high. On the gooseneck, 1 removable anodized aluminum rear wall, approx. 400 mm high. 2” king pin. Guide plate on gooseneck for fifth wheel plate, approx. 500 mm wide. 4 wheel chocks with holders. Mount for aluminum approach ramps. Mechanical landing legs with 2-speed gearbox and crank. Approx. 50 mm hardwood floor, continuous on the platform and interrupted between the axles. Platform locking with conically welded locking profiles every 250 mm, including pre-tensioning plate. Long holes at the front of the loading platform for hook-in and relocatable bridging elements. 1 intermediate table with recessed platform, approx. 300 mm wide for the extension tube with large cross-section with steel covering. Front and rear with long holes...

Stav: nový, pohotovostná hmotnosť: 14 350 kg, maximálna hmotnosť nákladu: 53 450 kg, celková hmotnosť: 67 800 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 800 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Výbava: ABS, zdvíhacie čelo, Swan neck: - Swan neck in SNT design to optimize the loading platform length, approx. 3,700 mm long - Swan neck at the rear with a taper, approx. 1,000 mm x 10° - Suitable for tractor units: 6x2, 6x4, 8x4 short Loading platform: - Extendable loading platform, approx. 8,800 mm long, with a rear taper of approx. 500 mm x 10° - Recess in the loading platform, including into the taper, to accommodate the excavator stick, approx. 3,850 x 750 x 210/290 mm Two-piece steel ramps: - One pair of two-piece steel ramps, approx. 4,350 mm long and approx. 900 mm wide - Ramps with rubber lining - Ramps can be hydraulically moved individually approx. 235 mm outward and approx. 215 mm inward - "Super Grip" rubber flooring 25 mm and metal flooring approx. 5 mm as additional reinforcement on the platform’s taper - Square climbing strips 20 x 30 mm, spaced approx. every 200 mm along the external ramp frame Axles, suspension, and tyres: - BPW axles and suspension, first axle steering ahead, all other axles hydromechanically forced-steered - Technical axle load: 12,000 kg - First axle with electromagnetic reverse lock, activated by reverse gear and manually selectable - Air suspension with lift and lower valve - Tyres 235/75 R 17.5 - TPMS tyre pressure monitoring system according to ECE R141 - TPMS sensors mounted in all wheels including spare wheels Itodpfx Aeya E A Nod Aof Surface treatment: - Complete steel construction shot-blasted after welding using a shot blasting plant - Second round of blasting with corundum for optimum coating adhesion - HRM-metallisation of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection - Final painting with 2 coats of 2K top coat in single colour MB 7350 Novagrau Accessories included: - Plug-in steel front wall, approx. 400 mm high - 3kW electro-hydraulic power unit for controlling hydraulic functions, excluding hydraulic winches - 1 spare wheel - External member on the swan neck with mounting holes for boltable lashing rings - First hole approx. 200 mm from the front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - 1 pair of horizontal lashing rings at the rear of the swan neck - On the swan neck: 1 pair of plug-in ALU side walls, approx. 400 mm high, anodised - On the swan neck: one plug-in ALU rear wall, approx. 400 mm high, anodised - Over the swan neck approx. 40 mm thick hardwood flooring, over the king pin area treadplate covering - 2" king pin - Round NATO socket on the front connection strip - 4 wheel chocks - 1 intermediate table, approx. 300 mm wide - 1 pair of lashing rings on the front cross member - 8 pairs of recessed lashing rings in the outer frame of the platform, foldable to the outside - Extendable (galvanised) widenings by approx. 230 mm each side - Wheel recesses with square climbing strips, 15 x 15 mm before the axles, open all the way to the swan neck cross member, approx. 700 x 410 mm - Wheel recesses with square climbing strips, 15 x 15 mm between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm - ALU covers for the wheel recesses, which can also be used as bridging elements for the extension or as widening planks - 1 pair of mechanical rear supports - Radio and cable remote control - Lift axle on the front axle - Square climbing strips 20 x 30 mm, approx. every 200 mm - Central lubrication system with 1 pump - Wabco Smart Board system - 4 warning panels, approx. 423 x 423 mm, extendable by approx. 400 mm

Stav: nový, celková hmotnosť: 78 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 800 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 850 mm, veľkosť pneumatiky: 245/70 R 17.5, farba: sivý, Výbava: ABS, Gooseneck: • Gooseneck in SNT design for load area length optimization, approx. 3,700 mm long, tapered at the rear approx. 1,000 mm x 10° Itjdpfxsrvw U Sj Ad Aof • For tractor units: 4 x 2, 6 x 2, and 6 x 4 Load area: • Load area with extendable design, approx. 8,800 mm long with rear taper approx. 500 mm x 10° • Recess in the load area and extending into the taper for excavator dipper stick accommodation, approx. 3,950 x 580 x 370/450 mm Ramps: • One pair of two-piece steel ramps, approx. 4,350 mm long and approx. 900 mm wide • Hydraulically folding ramp tips • Ramps individually hydraulically adjustable approx. 235 mm outwards and approx. 215 mm inwards • Hardwood covering on the tapered rear of the load area • Ramp with hardwood covering • Square climbing strips, 20 x 30 mm, spaced approx. every 200 mm on the outer ramp frame Axles and tyres: • TWINAXLE-II independent wheel suspension with BPW axle stubs, 1st axle with steering control ahead of pivot, all other axles hydromechanically forced steering • 1st axle with electromagnetic reverse lock activated via reverse gear or manually • Technical axle load: 12,000 kg • Hydraulic axle levelling, hydraulic cylinders with shut-off valves • Tyres: 245/70 R 17.5 • TPMS tyre pressure monitoring system in accordance with ECE R 141 Accessories included: • Plug-in steel front wall, approx. 400 mm high • 4 wheel chocks with holder • Yellow-red air couplings on the front connection bar • 3 kW electro-hydraulic unit for controlling hydraulic functions, except hydraulic winches • 1 spare wheel • 2 pairs of screw-in lashing rings • 1 pair of lying lashing rings in the rear area of the gooseneck • On the gooseneck: 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized • On the gooseneck: 1 plug-in ALU rear board, approx. 400 mm high, anodized • Hardwood covering approx. 40 mm thick over the gooseneck, checker plate covering over the kingpin • 3.5" kingpin • Gooseneck guide plate for the fifth-wheel plate, approx. 500 mm wide • Load area locking with conically welded locking profiles every 250 mm • Pre-tensioning plate included • 1 pair of lashing rings on the front cross member • 8 pairs of recessed lashing rings in the outer frame of the load area, foldable to the outside • Extensions (galvanized) extendable by approx. 230 mm each side • 1 pair of fixed wheel recesses, open up to extension, approx. 700 x 410 mm, in the load area in front of the 1st axle • Wheel recesses with sheet steel covering and square climbing strips 15 x 15 mm, spaced approx. every 200 mm • 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm, in the load area between the 1st and 2nd axle • Wheel recesses with square climbing strips 15 x 15 mm and extensions in the lower section • ALU covers for wheel recesses between the 1st and 2nd axle, can also be used as extension planks • 1 pair of mechanical rear supports • Square climbing strips, 20 x 30 mm, spaced approx. every 200 mm on the outer frame of the rear taper of the load area • Central lubrication system with 1 pump, brand BEKAMAX, with standard grease per NLGI-2 • Radio and wired remote control, with 2 indicator lights on the receiver as single track control • WABCO Smart Board system • The Smart Board is equipped with an odometer • 4 warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and brackets for rotating beacon

Stav: nový, pohotovostná hmotnosť: 10 700 kg, maximálna hmotnosť nákladu: 38 800 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 r 17,5, farba: sivo-čierny, Výbava: ABS, Gooseneck: •Gooseneck with beveled front corners at 45° and rear chamfer approx. 750 mm x 10° •3 pairs of lash rings •30 mm thick hardwood decking Extendable Load Platform: •Extendable load platform with rear chamfer approx. 1,000 mm x 8° •Cut-outs in the outer frame of the load platform for attaching lashing straps Itjdpehlz S Nsfx Ad Ajf •Approx. 48 mm thick hardwood decking, over the axles with chequer plate covering Two-piece Steel Ramps: •One pair of galvanized, two-piece steel ramps with approx. 48 mm thick hardwood covering •Ramps with hydraulically foldable ramp sections, hydraulic lifting system, and hydraulic lateral adjustment •Maximum capacity per pair: approx. 40,000 kg Axles and Tyres: •BPW axles and suspension, 2 rigid axles, 1 trailing steering axle •Technical axle load: 12,000 kg •Electromagnetic reverse lock, activated via reverse gear and manually •Air suspension with lift and lower valve •Axle tools •235/75 R 17.5 3PMSF Braking System: •WABCO braking system according to EU regulations with EBS-E Paintwork: •First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component zinc dust primer •High-quality, single-tone 2-component topcoat in MB 7350 Novagrau •Rear section metalized and painted in RAL 9010 Landing Legs: •JOST landing gear with 2-speed gearbox for 24 t lifting capacity (50 t test load). Steel Construction: •Steel construction made from high-strength fine-grained steels •Steel grades: •S355J2+N/S355MC •S690QL/S700MC Electrical System: •Electrical system complying with EU regulations, 24 volt lighting •ASPÖCK-UNIBOX on the front connection board with 24N, 24S & 15-pin sockets Accessories Included: •One spare wheel with holder •One galvanized steel front wall approx. 400 mm high •Yellow-red air couplings on the galvanized front connection board •4 wheel chocks •A holder for a warning beacon at the rear of the trailer •Recess in the rear gooseneck area for ALU approach ramps •Galvanized folding supports under the chamfer of the load platform •Cover plates to bridge the gap between the ramps and the load platform •White reflective tape as per EU regulations on the sides, extension, and rear (red) •Electro-hydraulic unit at the rear, under the load platform •One holder each on the gooseneck and on each ramp, left and right, for warning signs incl. socket •Ramp control valves mounted on the right-hand side of the trailer •On the gooseneck, ALU side and rear boards approx. 2,440 x 400 mm •Rear galvanized plug-in stakes are removable (body length approx. 2,560 mm) •Four warning panels, extendable by approx. 400 mm, each with a position light •3 pairs of WADER container pockets in the platform for a 20ft, 30ft, or 40ft container •6 pairs of stake pockets (100x50 mm) in the outer frame of the load platform •Galvanized extensions, extendable by approx. 230 mm per side •20 x 20 mm square toehold strips every 200 mm on the outer frame of the platform chamfer •Sanded surface finish painted on the chequer plates, king pin, and load platform as anti-slip protection •Load gauge for determination of axle loads, including load diagram •HRM metallization (High Resistance Metallisation) of the outer frame •Complete steel structure shot-blasted, then the defined visible areas metallized with ZINACOR 850 (zinc 85% - aluminium 15%) by hot finish

Stav: nový, pohotovostná hmotnosť: 13 250 kg, maximálna hmotnosť nákladu: 47 550 kg, celková hmotnosť: 60 800 kg, konfigurácia náprav: 3 nápravy, zavesenie: vzduch, veľkosť pneumatiky: 245/70 r17.5, farba: sivý, Výbava: ABS, Gooseneck: Gooseneck with rear chamfer of approx. 750 mm x 10°. 3 pairs of lashing rings 30 mm thick hardwood flooring Extendable loading platform: Extendable loading platform with rear chamfer of approx. 1,000 mm x 8° 5 pairs of hinged lashing rings (can be folded outward) 3 pairs of hinged lashing rings (can be folded outward) 1 pair of horizontal lashing rings at the front of the loading platform Cutouts in the outer frame of the loading platform for hooking in tensioning straps Hardwood floor approx. 48 mm thick, anti-slip checker plate over the axles Two-part steel ramps: One pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood overlay. Ramps with hydraulically extendable and retractable ramp sections, hydraulic lifting device, and hydraulically adjustable. Maximum load capacity per pair: 40,000 kg Landing legs: JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test capacity) Axles and tires: BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanical forced steering Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tools Tires: 245/70 R 17.5 Brake system: Brake system compliant with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit Steel construction: Steel construction made of high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Paintwork: Top-quality, durable corrosion protection of the standard shot-blasted welded frame guaranteed by a two-component (2K) zinc-rich primer High-quality single-color 2-component (2K) top coat in Nova Grey Rear section metalized and painted in RAL 9010 (pure white) No metallic paints possible Electrical system: Electrical system according to EU specifications, 24 volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets Connection as per ISO 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Accessories included: 2" kingpin Galvanized steel front wall approx. 400 mm high Yellow-red air couplings on the galvanized connection bar at the front 4 wheel chocks with holder at the front wall One spare wheel with holder in front of the front wall Electro-hydraulic power pack Remote steering from front and rear via cable remote control with push-button operation and single trace axle control Mount at the rear of the gooseneck for ALU loading ramps European reflective panels (red-yellow) at the rear of the trailer White reflective striping according to EU regulations at the side, at the extension element, and rear in red Isdpfxel Uxdko Ad Aotf On the gooseneck and ramps left and right, each with one bracket for warning signs including socket A bracket for a revolving beacon at the rear of the trailer Galvanized folding supports under the chamfer of the loading area Control valves for ramps mounted on the right side of the trailer Cover plates for bridging the gap between ramps and loading area One mudflap at the rear of the trailer Manual and documentation on USB stick Central lubrication system BEKAMAX (Pico) with standard NLGI-2 grease and removable pump guard On the gooseneck, removable ALU side boards and rear board approx. 2,440 x 400 mm Rear galvanized removable stanchions, body length approx. 2,560 mm A toolbox INOX 1,350x400x400 on the gooseneck, box covers oil fill 4 pairs of WADER container locks in the loading platform for one

Stav: nový, maximálna hmotnosť nákladu: 49 000 kg, celková hmotnosť: 60 800 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 r 17.5, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck with chamfered front corners at 45° and rear chamfer of approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Itedpfx Adsh Etf Rj Ajf Extendable Loading Area: - Extendable loading area with rear chamfer of approx. 1,000 mm x 8° - 5 pairs of fold-out lashing rings on the outside (LC 5,000 daN) - 3 pairs of fold-out lashing rings on the outside (LC 10,000 daN) - 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) - Cut-outs in the external frame of the loading area for attaching tie-down straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, with chequered plate covering over the axles Detachable Two-Part Ramps: - One pair of galvanized, two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood overlay - Ramps with hydraulically folding ramp sections, hydraulic lift and hydraulically adjustable side shift - Max. load per pair: 40,000 kg Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and Tyres: - BPW axles, two rigid axles, two self-steering axles, air-suspended, with drum brakes, lifting/lowering function - The self-steering axles can be locked via electromagnetic reverse lock through reverse gear or manually - Axle tools - Tyres: 235/75 R 17.5 Brake System: - Brake system in accordance with EU regulations with EBS-E (4S3M) Steel Construction: - Steel construction made from high-strength fine-grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Paintwork: - Premium and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc-rich primer - High-quality 2-component (2K) topcoat in single-tone Novagrey Electrical System: - Electrical system according to EU regulations, ASPÖCK-NORDIK (ASS3) 24 Volt lighting - ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets Included Accessories: - 2" king pin - One galvanized steel front wall, approx. 400 mm high - One spare wheel with holder in front of the front wall - Yellow and red air couplings on galvanized front terminal strip - 4 wheel chocks with holder on the front wall - Mounting at the rear of the gooseneck for ALU approach ramps - Galvanized folding supports under the chamfered loading area - Bracket for a rotating beacon - Cover plates to bridge the gap between ramps and loading area - White reflective tape according to EU regulations on the sides, red at the rear and on the extension - Electro-hydraulic power unit - At the gooseneck and on the ramps, left and right, each with mounting for warning panels including socket - Control valves for the ramps mounted on the right side of the semi-trailer - Mudflap at the rear of the trailer - User manual and description on USB stick - Removable ALU side boards and rear panel on the gooseneck, approx. 2,440 x 400 mm - Rear galvanized stanchions removable (body length approx. 2,560 mm) - 4 pairs of WADER container pockets in the loading area for a 20 ft, 2x 20 ft or a 40 ft container - 7 pairs of stake pockets for 100 x 50 mm stakes in the external frame of the loading area - Extensions, galvanized, retractable by approx. 230 mm per side - Lift axle on the front axle with control - 20 x 20 mm square climbing strips - BEKAMAX central lubrication system - Four warning panels extendable by approx. 400 mm (approx. 423 x 423 mm)

Stav: použitý, pohotovostná hmotnosť: 8 900 kg, maximálna hmotnosť nákladu: 40 100 kg, celková hmotnosť: 49 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 09/2025, dĺžka ložného priestoru: 9 200 mm, šírka ložného priestoru: 2 550 mm, zavesenie: vzduch, veľkosť pneumatiky: 245/70 R 17,5, farba: sivý, Rok výroby: 2025, Výbava: ABS, For every used semi-trailer, you receive a current and comprehensive inspection and functionality report. Chassis: - Robust welded steel frame construction with a front frame offset and level loading platform with rear taper approx. 500x100 mm - 200 mm gooseneck with chamfered front corners - Sloped end of the gooseneck approx. 500 x 100 mm (grip steps on the outer frame in the rear taper area) - 2 king pin positions with replaceable 2" king pin - Closed external frame as perforated outer frame - Loading platform with extendable central frame, extendable by approx. 2,000 mm lockable every 500 mm pneumatically - Frame stepped 80x80mm before and after division Iedjywv Ixjpfx Ad Astf - Reinforced frame design / point load in retracted state at center of gravity - Without extendable widening sections but prepped for later installation (= guide tubes welded into frame) - With excavator trough (uncovered), depth approx. 220 mm, width approx. 600 mm, starting after 2nd axle to vehicle end - 1 pair wheel recesses between 1st and 2nd axle with steel covers (covers with Körapur coating), depth approx. 400 mm - Rear underride guard = extended rear plate - Drop landing legs at the rear Floor: - 35 mm larch wood floor with aluminum omega profiles Axles, Steering, and Tires: - BPW air suspension axles, each 10 t axle load, airbag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lifting and lowering device with total lift approx. 200 mm - 2nd driving position via ball valve +50mm - 1st axle as lift axle (wired via EBS), full automatic confirmation with manual emergency actuation via button on the trailer - 3rd axle as friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, centrally positioned offset - 12 tires 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring system Equipment: - Removable side and rear boards on the gooseneck approx. 400 mm high - Spare wheel holder - Lateral aluminum side underrun protection - 4 wheel chocks with holders - Long license plate holder in rear plate - 1 ECE board insertable at rear - 11 pairs ZK modules 10t side: - 2x on the gooseneck - 2x on the loading platform before the extension - 7x after the extension - No rear towing eyes - Extendable warning signs including 3 position lights each, front at landing gear and rear before tail plate, steplessly extendable up to load width 4,500 mm - 4 holders for warning signs insertable in stanchion pockets on the loading platform - 6 pairs of side stanchion pockets for 100x50 mm plug-in stanchions - 2 cross rows of stanchion pockets for 100x50 mm stanchions on the gooseneck from outer to main frame (1x before and 1x after king pin positions) - 3 cross rows of stanchion pockets for 100x50 mm stanchions on the loading area from outer to main frame (1x before extension, 1x after extension, 1x after 3rd axle) - 2 pairs of steel plates in loading area for container locks to accommodate 1x 20ft container - Rubber apron mounted on underride guard - Pre-installed (NATO cable routing, hole pattern for subsequent installation of NATO socket at front of rear plate, and holder on the vehicle) for retrofitting an electrohydraulic unit right rear for possible control of loading ramps Optional: The trailer can be delivered with aluminum loading ramps.

Stav: nový, pohotovostná hmotnosť: 8 900 kg, maximálna hmotnosť nákladu: 40 100 kg, celková hmotnosť: 49 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 200 mm, šírka ložného priestoru: 2 550 mm, zavesenie: vzduch, veľkosť pneumatiky: 245/70 R 17,5, farba: sivý, prevádzková hmotnosť: 8 900 kg, Podvozok: Itodpfx Asxnnk Dod Aef - Pevná oceľová rámová zváraná konštrukcia s predným zalomením rámu a rovným ložným povrchom so skosením vzadu cca 500x100 mm - Krk rámu 200 mm s prednými skosenými rohmi - Skosený koniec labutieho krku cca 500 x 100 mm (vonkajší rám v oblasti zadného skosenia opatrený stúpacími rebrami) - 2 polohy kráľovského čapu s výmenným 2” čapom - Vonkajší rám uzavretý smerom von, dierovaný profil - Ložná plocha s výsuvným centrálnym rámom, výsuv cca 2 000 mm, po 500 mm s pneumatickým aretovaním - Rám pred a za delením so stupňom 80x80 mm - Spevnené vyhotovenie rámu / bodové zaťaženie v zasunutom stave v ťažisku - Bez výsuvných rozširovacích prvkov na ložnej ploche, pripravené na dodatočnú montáž (vodicí rúry zvarené v ráme) - S bagrovo jamou (bez krytu), hĺbka cca 220 mm, šírka cca 600 mm, začína cca za 2. nápravou po koniec vozidla - 1 pár kolových jám medzi 1. a 2. nápravou s oceľovým krytím (Körapur povrch), hĺbka cca 400 mm - Proti podbehnutiu = predĺžený záverečný plech - Zadné podpery s rýchlym spúšťaním Nápravy, riadenie a pneumatiky: - BPW vzduchové nápravy, každá 10 t nosnosť, priemer vankúša 360 mm - S-cams 300/200 mm, bezazbestové brzdové obloženie - Automatický napínač ťahadla - Zdvih a spúšťanie celkový zdvih cca 200 mm - 2. jazdná poloha cez guľový ventil +50 mm - 1. náprava zdvíhacia (káblovaná cez EBS), automatické prepínanie s núdzovým mechanickým ovládaním tlačidlom na návesu - 3. náprava vlečená, s elektrickou a mechanickou aretáciou - 12 oceľových diskov, 10-dierové, so stredovým upevnením - 12 pneumatík 245/70 R 17.5 143/141J, bezdušové - Vrátane monitorovania tlaku v pneumatikách Príslušenstvo: - Na labutom krku zasúvateľné bočnice a zadné čelo, výška cca 400 mm - Držiak rezervného kolesa - Bočný hliníkový nárazník - 4 podkladové kliny vrátane držiakov - Podlhovastý držiak ŠPZ v záverečnom plechu - 1 zasúvateľná ECE tabuľa vzadu - 11 párov ZK modulov 10t naboku: - 2x na labutom krku - 2x na ložnej ploche pred výsuvom - 7x za výsuvom - Výsuvné výstražné tabule vrátane 3 pozičných svetiel vpredu na oporných nohách a vzadu pred záverečným plechom, bezstupňovo vysúvateľné na šírku ložnej plochy do 4 500 mm - 4 zasúvateľné držiaky pre výstražné tabule v rúrkach na ložnej ploche - 6 párov zásuvných vreciek na laty 100x50 mm po bokoch - 2 priečne rady zásuvných vreciek na laty 100x50 mm na labutom krku od vonkajšieho rámu do hlavného rámu (1x pred a 1x za kráľovským čapom) - 3 priečne rady zásuvných vreciek na laty 100x50 mm na ložnej ploche od vonkajšieho rámu do hlavného rámu (1x pred výsuvom, 1x za výsuvom a 1x za 3. nápravou) - 2 páry oceľových dosiek v ložnej ploche pre zámky na kontajner na 1x 20ft kontajner - Gumová zásterka namontovaná na ochranu proti podbehnutiu Náves je voliteľne dostupný s rampami.

Stav: použitý, pohotovostná hmotnosť: 10 000 kg, maximálna hmotnosť nákladu: 39 000 kg, celková hmotnosť: 49 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 10/2025, dĺžka ložného priestoru: 9 200 mm, šírka ložného priestoru: 2 550 mm, celková šírka: 2 550 mm, zavesenie: vzduch, veľkosť pneumatiky: 245/70 R 17,5, farba: sivý, Výbava: ABS, zdvíhacie čelo, Pre každú použitú náves dostanete aktuálnu a kompletnú inšpekčnú a funkčnú správu. Podvozok: -Stabilná zváraná oceľová rámová konštrukcia s predným krkom rámu a rovným ložným priestorom so zadným skosením cca 500x100 mm -Rámový krk 200 mm so skosenými rohmi vpredu -Skosený koniec husacieho krku cca 500 x 100 mm (protišmykové nákružky na vonkajšom ráme v oblasti zadného skosenia) -2 polohy pre kráľovský čap s vymeniteľným 2" kráľovským čapom -Vonkajší rám uzavretý smerom von s otvormi (tzv. dierovaný vonkajší rám) -Ložná plocha s výsuvným centrálnym rámom, vysúvateľná cca o 2 000 mm, s možnosťou zaistenia po 500 mm pneumatickým uzamykaním -Rám pred a po delení so stupňom 80x80 mm -Zosilnené vyhotovenie rámu / bodové zaťaženie v zasunutom stave v ťažisku -S bagrovou vaničkou (bez krytu), hĺbka cca 220 mm, šírka cca 600 mm, začiatok cca za 2. nápravou až po koniec vozidla -1 pár kolesových vaní medzi 1. a 2. nápravou s oceľovými poklopmi (poklopy s povrchovou úpravou Körapur), hĺbka cca 400 mm Rampen: -2 kusy dvojdielnych nájazdových rámp v špeciálnom vyhotovení s mechanickým predĺžením -Dĺžka cca 2 850 mm plus 1 850 mm, s hydraulickým zdvíhaním rámp (len v kombinácii s elektrohydraulickým agregátom) -Šírka cca 800 mm -Drevená výplň -Vrátane protišmykových nákružkov na nájazdových rampách -V prepravnej polohe zaistiteľné upínacími pásmi -Ovládanie pomocou riadiacej páky vzadu, montovanej vpravo na FR -Bočne hydraulicky posuvné Podlaha: -35 mm podlaha z dreva z červeného smreka s hliníkovými Omega profilmi Itjdpjxxl E Hsfx Ad Ajf Nápravy, riadenie a obutie: -Nápravy BPW s pružením vzduchovými vankúšmi, zaťaženie nápravy 10 t, priemer vankúša 360 mm -Brzdy S-cam 300/200 mm, bezazbestové brzdové obloženie -Automatické nastavovače ťažného zariadenia -Zdvíhacie a spúšťacie zariadenie s celkovým zdvihom cca 200 mm -2. prepravná pozícia cez guľový ventil +50 mm -1. náprava je zdvíhacia náprava (prepojená cez EBS), potvrdzovanie plne automaticky s mechanickou núdzovou aktiváciou cez tlačidlo na návesu -3. náprava ako vlečená náprava s elektrickou a mechanickou uzávierkou -12 oceľových diskových kolies, 10-otvorové, stredové uloženie -12 pneumatík 245/70 R 17,5 143/141J, bezdušové -Vrátane monitorovania tlaku v pneumatikách Príslušenstvo: -Na husacom krku odnímateľné bočnice a zadné čelo cca 400 mm vysoké -Držiak na rezervné koleso -Bočný hliníkový nárazník -4 podložky pod kolesá vrátane držiakov -Pozdĺžny držiak ŠPZ na zadnej časti -1 ECE tabuľka na zadnú časť, odnímateľná -11 párov ZK modulov 10t po bokoch: -2x na husacom krku -2x na ložnej ploche pred výsuvom -7x po výsuve -Výsuvné výstražné tabuľky, vrátane po 3 polohových svetlách, vpredu na výsuvných nohách a vzadu pred koncovou časťou, plynulo výsuvné až do šírky ložného priestoru 4 500 mm -4 ks držiakov do vreciek pre výstražné tabuľky, zasúvateľné do ložnej plochy -6 párov vreciek na stĺpiky pre nasúvacie stĺpiky 100x50 mm -2 rady vreciek na stĺpiky priečne na husacom krku od vonkajšieho rámu po hlavný rám (1x pred a 1x za pozíciami kráľovského čapu) -3 rady vreciek na stĺpiky priečne na ložnej ploche od vonkajšieho rámu po hlavný rám (1x pred výsuvom, 1x za výsuvom a 1x za 3. nápravou) -2 páry oceľových platní v ložnej ploche na uzamknutie kontajnerov na umiestnenie 1x 20ft kontajnera

Stav: použitý, pohotovostná hmotnosť: 11 200 kg, maximálna hmotnosť nákladu: 36 800 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 10/2025, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17.5, farba: sivý, Rok výroby: 2025, Výbava: ABS, Ku každému použitému návesu obdržíte aktuálnu a kompletnú inšpekčnú a funkčnú správu. Labutí krk: - Labutí krk so zadným skosením cca 750 mm x 10° - 3 páry upevňovacích krúžkov (LC 5 000 daN) - Povrch z tvrdého dreva, hrúbka 30 mm Nakladacia plocha vo vysúvateľnom prevedení: - Teleskopická nakladacia plocha so skosením vzadu cca 1 000 mm x 8° - 1 pár pevne zabudovaných kolísk pre kolesá pred nápravami cca 2 850 x 970 x 400 mm - Koliská pre kolesá s hranatými nášľapmi 15 x 15 mm a rozšíreniami v spodnej časti - Medzi prvou a druhou nápravou 1 pár pevne zabudovaných kolísk pre kolesá, cca 1 610 x 970 x 400 mm - Vrátane 3-dielnych odnímateľných pozinkovaných krytov nad koliskami (šírka 670 mm) – max. bodové zaťaženie 5 t / ks - Prehlbenie v skosení aj v prečnievaní nakladacej plochy na uchytenie lyžice bagra cca 2 900 x 750 x 210/290 mm - 1 pár upevňovacích krúžkov ležiacich vpredu v nakladacej ploche (LC 10 000 daN) - 5 párov vyklápateľných upevňovacích krúžkov (LC 5 000 daN) - 2 páry vyklápateľných upevňovacích krúžkov (LC 10 000 daN) - 2 páry upevňovacích krúžkov v prehlbení na rameno bagra (LC 5 000 daN) - Výrezy vo vonkajšom ráme nakladacej plochy na zavesovanie upínacích pásov (LC 2 000 daN) Rampen: - Jeden pár pozinkovaných dvojdielnych oceľových rámp cca 2 750 + 1 400 x 800 mm s povrchom z tvrdého dreva hrubého cca 48 mm - Rampa s hydraulicky sklopnými a zasúvateľnými časťami rampy, hydraulickým zdvihom a hydraulickým posunom - Maximálne zaťaženie na pár: 40 000 kg Nápravy a pneumatiky: - BPW nápravy a zavesenie, 2 nápravy pevné, 1 náprava s navádzaním - Technická nosnosť nápravy: 12 000 kg - Elektromagnetická spätná zámka ovládaná zaradením spiatočky a manuálne - Vzduchové pruženie so zdvihom a spúšťaním - Náradie k nápravám - TPMS systém kontroly tlaku pneumatík podľa ECE R 141 - Pneumatiky 235/75 R17.5 3PMSF Príslušenstvo v cene: - Na labutom krku a vzadu vľavo aj vpravo držiak na výstražné tabule vrátane zásuvky - Jedno rezervné koleso s držiakom pred čelnou stenou - 2" kráľovský čap - Jeden pozinkovaný čelný plech z ocele, výška cca 400 mm - Na pozinkovanej prípojkovej lište vpredu žlto-červené vzduchové spojky - 4 kusy podložných klinov s držiakom - Pozinkované rozšírenia, vysúvateľné cca o 230 mm na každú stranu - Pozinkované sklopné podpery pod skosením nakladacej plochy - Krycie plechy na premostenie priestoru medzi rampami a nakladacou plochou - Biele reflexné pásy podľa predpisov EÚ po stranách a na vysuvnej časti, vzadu červené - Elektrohydraulická jednotka vzadu pod nakladacou plochou - Európske reflexné tabule (červeno-žlté) vzadu na návesu - 4ks výstražných tabúľ, výsuvné cca o 400 mm, cca 423 x 423 mm, s pozičným svetlom - Na výstražných tabuliach držiak na výstražné majáky - Na labutom krku hliníkové bočnice a zadné zasúvacie steny cca 2 440 x 400 mm - Zadné, pozinkované zasúvacie stĺpiky sú odnímateľné (dĺžka nadstavby cca 2 560 mm) - 2 páry kontajnerových vreciek WADER v nakladacej ploche pre 20ft alebo 30ft kontajner - 3 páry vreciek na stĺpiky (100 x 50 mm) vo vonkajšom ráme nakladacej plochy Iodpfx Ajyylduod Aetf - Jeden odnímateľný, pozinkovaný medzistôl s 1 párom WADER kontajnerových vreciek - Hranaté nášľapy 20 x 20 mm každých 200 mm na vonkajšom ráme skosenia nakladacej plochy - Na ryhovaných plechoch na labutom krku a nakladacej ploche nalakovaná piesková vrstva ako protišmyková úprava - Nálepka na rýchlosť 80 km/h vzadu a na oboch stranách - Manometer na zaťaženie na určenie zaťaženia náprav vrátane zaťažovacieho diagram

Stav: použitý, pohotovostná hmotnosť: 12 200 kg, maximálna hmotnosť nákladu: 37 900 kg, celková hmotnosť: 50 100 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 12/2023, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Rok výroby: 2023, Výbava: ABS, With every used semi-trailer, you receive a current and complete inspection and function report. Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Itjdpfoyx E E Aox Ad Asf Extendable load area: - Extendable load area with rear chamfer approx. 1,000 mm x 8° - 5 pairs of outward-folding lashing rings (LC 5,000 daN) - 3 pairs of outward-folding lashing rings (LC 10,000 daN) - 1 pair of flat-mounted lashing rings at the front of the load area (LC 10,000 daN) - Cut-outs in the outer frame of the load area for attaching tensioning straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, with checker plate over the axles Ramps: - One pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood surface - Ramp with hydraulically folding and unfolding ramp sections, hydraulic lifting system, and hydraulically adjustable - Maximum load per pair: 40,000 kg Axles and tyres: - BPW axles and suspension; all axles forced-steered by hydromechanics - Technical axle load: 12,000 kg - Air suspension with lifting and lowering valve - Axle tools - Tyres: 235/75 R 17.5 Accessories included: - 2" king pin - One galvanized steel front wall approx. 400 mm high - Yellow-red air couplings on the galvanized front terminal - 4 wheel chocks with holders - One spare wheel with holder in front of the front wall - Electro-hydraulic unit - Remote steering front and rear via cable remote control with push buttons, with axle tracking control - Mount at rear of gooseneck for ALU drive-on ramps - Gooseneck and ramps each left and right with mount for warning signs incl. socket - Galvanized folding supports under the chamfer of the load area - Ramp operation valves located on the right side of the trailer - Cover plates to bridge the gap between ramps and load area - On the gooseneck, approx. 2,440 x 400 mm plug-in ALU side walls and tailgate - Rear galvanized stanchions are removable (body length approx. 2,560 mm) - 4 pairs of WADER container locks in the floor for 1x 20ft, 2x 20ft, 40ft, or 1x 45ft container - 7 pairs of stanchion pockets for 100 x 50 mm plug-in stanchions in the outer frame of the load area - Galvanized extensions, extendable by approx. 230 mm per side - One INOX toolbox 1,500 x 390 x 810 mm underneath the load area, right side in direction of travel - 20 x 20 mm climbing bars every 200 mm on the outer frame along the load area chamfer - Lift axle at the front axle with control by TEBS E depending on current axle load and load condition - BEKAMAX central lubrication system (Pico) with standard grease NLGI-2 - Four warning signs, each extendable by approx. 400 mm, size approx. 423 x 423 mm, each with a position light - Radio remote control for remote steering in addition to the cable remote control, with indicator lights on the receiver for axle tracking control - Non-slip sand layer painted onto the checker plates, over the king pin and the load area - 80 km/h speed stickers on the rear and both sides - Load gauge for determining axle loads including load chart - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel construction shot-blasted, then all specified visible surfaces hot-finished with metallisation using ZINACOR 850 (zinc 85% - aluminium 15%)

Stav: použitý, pohotovostná hmotnosť: 10 650 kg, maximálna hmotnosť nákladu: 40 310 kg, celková hmotnosť: 50 960 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 10/2024, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 760 mm, zavesenie: vzduch, veľkosť pneumatiky: 205/65 R17.5, farba: sivý, Rok výroby: 2024, prevádzková hmotnosť: 10 650 kg, Výbava: ABS, For every used semi-trailer, you will receive a current and comprehensive inspection and functionality report. Gooseneck: - Gooseneck with 30 mm thick hardwood flooring - Rear straight gooseneck design - 3 pairs of lashing rings (LC 5,000 daN) Loading platform: - Extendable loading platform - 5 pairs of fold-out lashing rings (LC 5,000 daN) - 3 pairs of fold-out lashing rings (LC 10,000 daN) - 1 pair of flush-mounted lashing rings at the front of the loading platform (LC 10,000 daN) - Cut-outs in the external frame of the platform for attaching tie-down straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, over the axles covered with checker plate Axles and Tyres: - BPW axles, 2 fixed axles, 2 self-tracking axles - Air suspension, drum brakes, lifting/lowering function - Self-tracking axles with electro-magnetic reverse lock, can be activated by reverse gear or manually - Axle tools - Tyres 205/65 R17.5 Brake System: - WABCO brake system in accordance with EU regulations, with EBS-E (4S3M) Steel Construction: - High-strength fine-grain steel construction - Steel grades: S355J2+N/S355MC (yield strength 355MPa) Itjdsxfa E Uopfx Ad Ajf S690QL/S700MC (yield strength 690MPa) Painting: - First-class and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) top coat, single-color Novagrau Accessories included: - Spare wheel carrier in front of front wall - 2" king pin - Galvanized steel front wall approx. 400 mm high - At the galvanized front connection bar, yellow and red air couplings - 4 wheel chocks with holder on the front wall - Galvanized folding supports under the bevel of the platform - Bracket for beacon light at the rear of the semi-trailer - Zinc-plated extendable width extensions, approx. 230 mm per side - White reflective tape according to EU regulations on the sides, on the extension, and red at the rear - Gooseneck and rear plate each with a warning sign bracket including socket left and right - Mudflap at the rear - European reflective signs (red-yellow) at the rear of the semi-trailer - TPMS tire pressure monitoring system in accordance with ECE R 141 - On the gooseneck, removable ALU side walls and rear wall approx. 2,440 x 400 mm - Removable galvanized rear stanchions (body length approx. 2,560 mm) - 7 pairs of container locks: 1x 20ft container on the platform; 1x 40ft container on the platform; 1x 40ft container on the gooseneck; 2x 20ft containers - 7 pairs of pockets for plug-in stanchions 100 x 50 mm in the outer frame of the platform - Lifting axle at the front axle with TEBS E control, depending on the current axle load and cargo condition - Movable hanging rail for ALU loading ramps at the rear of the vehicle - On the checker plate on the gooseneck and platform, painted sand layer for anti-slip protection - Four extendable warning panels (approx. 400 mm extension), approx. 423 x 423 mm, each with a positioning light - Bracket for beacon on the warning panels - 80 km/h speed stickers at the rear and on both sides - Load gauge for determining axle loads including load chart - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel construction shot-blasted, then the defined visible surfaces metallized with ZINACOR 850 (Zinc 85% - Alu 15%), hot-finished

Stav: použitý, pohotovostná hmotnosť: 13 200 kg, maximálna hmotnosť nákladu: 52 800 kg, celková hmotnosť: 66 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 06/2025, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 245/70 R 17,5, farba: sivý, Rok výroby: 2025, Výbava: ABS, With every used semi-trailer, you will receive a current and comprehensive inspection and functionality report. Gooseneck: - Gooseneck with rear taper approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable Loading Platform: - Extendable platform with rear taper approx. 1,000 mm x 8° - 5 pairs of folding external lashing rings (LC 5,000 daN) - 3 pairs of folding external lashing rings (LC 10,000 daN) - 1 pair of recessed lashing rings at the front of the platform (LC 10,000 daN) - Cut-outs in the outer frame of the loading platform for tension strap hooks (LC 2,000 daN) - Hardwood flooring approx. 48 mm thick, chequer plate covering above the axles Axles and Tyres: - BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanically steered - Technical axle load: 12,000 kg - Air suspension with raise/lower valve - Tyres 245/70 R 17.5 - TPMS tyre pressure monitoring system according to ECE R 141 Iedpoyffd Dsfx Ad Astf Two-piece Steel Ramps: - One pair of galvanized two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with 48 mm thick hardwood cover - Ramps with hydraulically folding sections, hydraulic lifting device, and hydraulically adjustable position - Maximum load per pair: 40,000 kg Included Accessories: - 2" kingpin - One galvanized steel front wall approx. 400 mm high - Yellow-red air couplings on the front galvanized connection rail - 4 wheel chocks - One spare wheel - Electro-hydraulic unit - Remote steering control from front and rear via cable remote with push buttons, includes axle alignment monitoring - Mounting points at the rear of gooseneck for ALU drive-on ramps - European reflective warning panels (red-yellow) at the rear of the trailer - White reflective tape in compliance with EU regulations on sides, on extension, and red at the rear - At the gooseneck and ramp sides (left/right) each one mount for warning signs including socket - One mount for beacon at rear of trailer - Galvanized folding supports under loading platform taper - Operating valves for ramps located on the right side of the trailer - Cover plates to bridge the gap between ramps and loading platform - Central lubrication system BEKAMAX (Pico) with standard NLGI-2 grease - On the gooseneck: ALU side and rear walls approx. 2,440 x 400 mm, pluggable - Rear galvanized plug-in stakes are removable (body length approx. 2,560 mm) - INOX toolbox 1,350 x 400 x 400 mm on gooseneck, box covers oil filler cap - 4 pairs of WADER container locks in loading platform for one 20ft, 2x 20ft, 40ft or one 45ft container - 7 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading platform - Galvanized platform extensions, extendable by approx. 230 mm per side - Checkerboard climbing strips 20 x 20 mm every 200 mm on the outer frame of the platform taper - Lift axle on front axle, control via TEBS E depending on current axle load and loading status - Four warning panels extendable by approx. 400 mm (approx. 423 x 423 mm) each with position light - Radio remote control for remote axle steering in addition to cable control, with control lights on receiver for axle tracking - Anti-slip sand coating applied on chequer plates on gooseneck and loading platform - 80 km/h speed limit stickers at rear and on both sides

Stav: nový, pohotovostná hmotnosť: 11 000 kg, maximálna hmotnosť nákladu: 38 500 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Neck (Gooseneck): - Gooseneck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading Platform: - Telescopic loading platform with rear chamfer approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm - Wheel recesses with 15 x 15 mm square climbing strips and widenings in the lower area - Between the 1st and 2nd axle a pair of fixed wheel recesses with cover, approx. 1,610 x 970 x 400 mm - Recess in the chamfer and protruding into the loading platform for the reception of an excavator dipper stick approx. 2,900 x 750 x 210/290 mm - 1 pair of horizontal lashing rings at the front of the platform (LC 10,000 daN) - 5 pairs of fold-out lashing rings (LC 5,000 daN) - 2 pairs of fold-out lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) - Cutouts in the outer frame of the platform for securing straps (LC 2,000 daN) - incl. 3-piece removable galvanized covers over the wheel recesses – max. point load 3.5 t / each Two-Part Steel Ramps: - One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood planking - Ramp with hydraulically folding ramp sections, hydraulic lifting system, and hydraulically adjustable position Axles and Tyres: - BPW axles and suspension, 2 axles fixed, 1 axle self-steering - Technical axle load: 12,000 kg - Electromagnetic reverse lock, operable via reverse gear and manually - Air suspension with lifting and lowering valve - Axle tools - Tyres 235/75 R 17.5 - TPMS tire pressure monitoring system according to ECE R 141 Accessories included: Itsdpoup U Hzsfx Ad Aef - On the gooseneck and at the rear, left and right, each with a mount for warning signs including socket - One spare wheel - 2" king pin - One galvanized steel front wall approx. 400 mm high - Front galvanized connection rail with yellow-red air couplings - 4 wheel chocks - Galvanized extendable widenings, approx. 230 mm each side - Galvanized folding supports under the platform chamfer - One holder for a revolving beacon at the rear of the trailer - Cover plates to bridge the gap between ramps and platform - White reflector tape on sides and extension; rear in red, per EU regulations - Electro-hydraulic unit at the rear under the platform - Controls for ramps mounted on the right side of the trailer - European reflective warning signs (red-yellow) at the rear of the trailer - Four approx. 400 mm extendable warning panels, approx. 423 x 423 mm, each with a position light - Mount for revolving beacon on the warning panels - Aluminium plug-in drop sides and rear wall on the gooseneck, approx. 2,440 x 400 mm - Removable rear galvanized stanchions (body length approx. 2,560 mm) - 2 pairs of WADER container locks recessed into the platform for one 20ft or 30ft container - 3 pairs of stanchion pockets 100 x 50 mm on the outer frame of the platform - One removable galvanized intermediate table with 1 pair of WADER container locks - 20 x 20 mm square climbing strips every 200 mm on the outer frame of the platform chamfer - Painted sand layer on the tread plates on the gooseneck and the loading platform as anti-slip coating - 80 km/h speed stickers at the rear and both sides - Load manometer for determining the axle loads, including load diagram

Stav: nový, pohotovostná hmotnosť: 9 800 kg, maximálna hmotnosť nákladu: 39 200 kg, celková hmotnosť: 49 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 200 mm, šírka ložného priestoru: 2 550 mm, zavesenie: vzduch, veľkosť pneumatiky: 245/70 R 17,5, farba: sivý, prevádzková hmotnosť: 9 800 kg, Výbava: ABS, Chassis: - Robust steel frame welded construction with front frame cranking and level loading platform, rear bevel approx. 500x100 mm - Neck of frame 200 mm with beveled front corners - Sloped end swan neck approx. 500 x 100 mm (ribbed anti-slip strips on outer frame in the area of the rear bevel) - 2 king pin positions with exchangeable 2" king pin - Outer frame fully welded as perforated external frame - Loading platform with extendable central frame, extendable by approx. 2,000 mm, can be locked pneumatically in 500 mm increments - Frame before and after separation with 80x80 mm step - Reinforced frame design / point load supported at center of gravity when retracted - No extendable load width extensions, but prepared for retrofitting (= guide tubes welded into frame) - With excavator recess (without cover), depth approx. 220 mm, width approx. 600 mm, starting approx. after 2nd axle to vehicle end - 1 pair wheel recesses between 1st and 2nd axle with steel covers (Körapur-coated), depth approx. 400 mm - Underrun protection = extended end plate - Drop leg rear supports Ramps: - 2 pcs. special design two-piece loading ramps with mechanical extension Iedjxgm S Dopfx Ad Aotf - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting (only in conjunction with electrohydraulic unit) - Width approx. 800 mm - Wooden decking - Incl. ribbed anti-slip strips on ramps - Can be secured in travel position with lashing straps - Operated via control lever mounted at rear, RH side of chassis - Laterally hydraulically adjustable Floor: - 35 mm larch wood floor with aluminum omega profiles Landing Gears: - Mechanical 24 t landing gears with single-side operation and load equalization Axles, Steering, and Tyres: - BPW air suspension axles, max. 10 t axle load each, air bellows diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - Lift and lower system, total travel approx. 200 mm - 2nd driving height via ball valve +50 mm - 1st axle lift axle (wired via EBS), activation fully automatic with emergency operation by push button on trailer - 3rd axle as friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, centered offset mounting - 12 tyres size 245/70 R 17.5 143/141J, tubeless - Incl. tire pressure monitoring system Accessories: - Plug-in side and rear walls on swan neck, approx. 400 mm high - Spare wheel holder - Lateral aluminum underrun protection - 4 wheel chocks - 1 plug-in ECE rear panel - 11 pairs ZK-modules 10t each, on sides: - 2x on swan neck - 2x on platform before extension - 7x after extension - Extendable warning boards incl. 3 position lamps each, mounted at front landing gears and rear before end plate, steplessly extendable to platform width of 4,500 mm - 4 mounting slots for warning boards in stake pockets on load platform - 6 pairs of side stake pockets for 100x50 mm plug-in stakes - 2 transverse stake pocket rows for 100x50 mm stakes across swan neck from outer frame to main frame (1 before and 1 after king pin positions) - 3 transverse stake pocket rows for 100x50 mm stakes across load platform from outer frame to main frame (1 before extension, 1 after extension, 1 after 3rd axle) - 2 pairs of steel plates in loading platform for container locks to fit 1x 20ft container - Rubber skirt fitted to underrun protection

Stav: nový, pohotovostná hmotnosť: 10 900 kg, maximálna hmotnosť nákladu: 37 100 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 890 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17.5, farba: sivý, prevádzková hmotnosť: 10 900 kg, Výbava: ABS, Gooseneck: - Gooseneck in SNT design for optimizing the loading platform length, approx. 3,700 mm long, rear chamfer approx. 1,000 mm x 6° - Technical fifth wheel load: 18,000 kg - For tractor units: 4 x 2 and 6 x 2 Loading Platform: - Loading platform approx. 9,600 mm long with rear chamfer approx. 900 mm x 6° - Platform behind gooseneck hydraulically liftable/lowerable, approx. 3,000 mm long, load capacity up to approx. 9,000 kg - Grating and 5 mm steel plate reinforcement on the chamfered section as additional strengthening Ramps: - One pair of two-piece AXS steel ramps, approx. 4,675 mm long, 900 mm wide - Grating surface - Hydraulically foldable ramp tips - Ramps can be hydraulically shifted individually approx. 235 mm outwards and approx. 365 mm inwards - Painted anti-slip sand-coating on ramp outer frame and ramp tip - Flashing lights mounted on ramp tips with switch next to ramp control panel - Quick-release ramp locks for securing in transport position Axles, Suspension, and Tyres: - BPW axles and suspension, 1st and 2nd axles fixed, 3rd axle self-steering - 1st axle with starting aid - Operated via brake pedal of the tractor unit - Technical axle load: 12,000 kg Iodpfjuadk Njx Ad Ajtf - Air suspension with raise/lower valve - 235/75 R 17.5 - TPMS (Tyre Pressure Monitoring System) to ECE R 141 specification - TPMS sensors fitted in all wheels, including spares Braking System: - WABCO EBS-E braking system complying with EU regulations Paintwork: - Trailer MB 7350 Nova Grey Included Accessories: - Pin-type steel front wall, approx. 400 mm high - 3 kW electro-hydraulic power unit for hydraulic operations (excluding hydraulic winches) - Gooseneck guide plate for fifth wheel, approx. 500 mm wide - JOST Modul B landing gear - static test load = 50,000 kg - Continuous grating with 5 mm steel baseplate as additional reinforcement - Painted sand-coating - Cut-outs in outer frame of platform and lift bed for attaching hydraulic ramp control valves on right side of trailer - 2" king pin - Central lubricating system with 1 pump, brand BEKAMAX - On gooseneck: 1 pair removable ALU side walls, approx. 400 mm high, anodized - Electric cable winch, approx. 5,400 kg pulling force, with radio remote control - Steel cable approx. 24 m long, diameter approx. 9.5 mm, incl. cable pressure roller - WABCO Smart Board system - 4 extendable warning boards, approx. 423 x 423 mm, extendable by approx. 400 mm

Stav: nový, pohotovostná hmotnosť: 10 350 kg, maximálna hmotnosť nákladu: 39 150 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Výbava: ABS, Swan neck: - Swan neck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood floor, 30 mm thick Loading area: - Telescopic loading platform with rear bevel, approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm - Wheel recesses with square climbing bars 15 x 15 mm and widened sections at the bottom - Between 1st and 2nd axle: 1 pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm - 3-part removable galvanized covers over the wheel recesses (W 670 mm) – max. point load 5 t each - Recess in the rear bevel as well as into the loading area for excavator bucket stick storage, approx. 2,900 x 750 x 210/290 mm - 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN) - 5 pairs of outward-folding lashing rings (LC 5,000 daN) - 2 pairs of outward-folding lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) - Cutouts in the outer frame of the platform for attaching tie-down straps (LC 2,000 daN) One-piece ALU ramps: - One pair of one-piece ALU ramps approx. 2,500 x 600 mm - Ramp with spring lifting mechanism, manually adjustable - Maximum load per pair: 24,000 kg Axles and tires: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated automatically via reverse gear and manually - Air suspension with lift and lower valve - Axle tools - Tires 235/75 R 17.5 - TPMS tire pressure monitoring system according to ECE R 141 Accessories included: - 1 spare wheel with holder in front of the headboard Iodpjiu Er Ajfx Ad Astf - 2-inch king pin - 1 galvanized steel headboard, approx. 400 mm high - Yellow-red air couplings to the galvanized connection rail at the front - 4 wheel chocks with holders on headboard - ALU ramp storage at the rear of the swan neck - Galvanized extendable width extensions, extendable by approx. 230 mm per side - Galvanized folding supports under rear bevel of loading area - 1 beacon mounting bracket at trailer rear - White reflector tape according to EU regulations on the sides; red on extension and rear - Swan neck and rear panel each with 1 holder for warning signs incl. socket, left and right - On swan neck: ALU drop-in side panels and rear panel, approx. 2,440 x 400 mm - The rear galvanized drop-in stakes are removable (superstructure length approx. 2,560 mm) - 2 pairs of WADER container pockets in platform for one 20ft or 30ft container - 3 pairs of stake pockets 100 x 50 mm in outer frame of platform - 1 removable galvanized intermediate table with 1 pair of WADER container pockets - Square climbing bars 20 x 20 mm every 200 mm on the outer frame at platform's rear bevel - Anti-slip sand finish painted onto tread plates on swan neck and loading area - Four extendable warning signs approx. 423 x 423 mm, extendable by approx. 400 mm, each with position light - Warning signs equipped with bracket for beacon - 80 km/h speed stickers on rear and both sides - Load pressure gauge for axle load determination including load chart - HRM metallization (High Resistance Metallisation) of outer frame - Complete steel structure shot-blasted, then all defined visible areas metallized with ZINACOR 850 (zinc 85% - alu 15%) via hot finishing

Stav: nový, pohotovostná hmotnosť: 15 420 kg, maximálna hmotnosť nákladu: 61 080 kg, celková hmotnosť: 76 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 900 mm, veľkosť pneumatiky: 235/75/r17,5, farba: sivý, Výbava: ABS, Gooseneck: Gooseneck with rear bevel of approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading Area: Extendable loading area with rear bevel of approx. 500 mm x 8° 8 pairs of folding outward lashing rings 1 pair of flat lashing rings at the front of the loading area Cutouts in the outer frame of the loading area for securing load straps Approx. 48 mm thick hardwood flooring, non-slip checker plate cover above the axles Two-piece Steel Ramps: One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering. Ramp parts are hydraulically foldable, equipped with hydraulic lifting mechanism and hydraulic lateral adjustment. Maximum load per pair: 50,000 kg. Landing Legs: • JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: BPW axles and suspension, 4th and 5th axle steering Technical axle load: 12,000 kg 4th and 5th axles with electromagnetic reverse lock activated via reverse gear and manual operation Tyres 235/75 R 17.5 3PMSF Braking System: Braking system according to EU regulations with EBS-E (4S3M) Sockets and Lighting: Electrical system according to EU regulations, 24-volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets Connections according to ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paintwork: First-class and durable corrosion protection, achieved by standard shot-blasted welded frame with a 2-component (2K) zinc dust primer High-quality single color 2-component (2K) topcoat in MB 7350 Novagrau Rear section metallized and painted in RAL 9010 (Pure White) Metallic lacquer not available Steel Structure: Steel construction made from high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Accessories: Iedpfx Adel Sl Ize Aetf One spare wheel with bracket in front of the bulkhead 2" kingpin Galvanized steel front wall approx. 400 mm high Yellow-red air couplings on the galvanized front connector strip 2 wheel chocks with holders on the front wall Provision at the rear of the gooseneck for ALU drive-on ramps Bracket for a beacon at the rear of the trailer Galvanized supports under the rear bevel of the loading area White reflector tape according to EU regulations on the sides, at the extension and rear red Electro-hydraulic unit at the rear under the loading area On gooseneck and rear panel (left and right) bracket for warning signs incl. socket Control valves for the ramps installed on the right side of the trailer A mud flap at the rear of the trailer Manual and description on USB stick 3.5" kingpin supplied loose On the gooseneck, plug-in ALU side walls and rear wall approx. 2,440 x 400 mm (LxH) Rear galvanized plug-in stakes are removable (Length of the structure approx. 2,560 mm) 3 pairs of WADER container pockets on the loading area for one 20' (30') or a 40' container 6 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading area Galvanized extensions, extendable by approx. 230 mm per side Lifting axle on the front axle, control via TEBS-E depending on current axle load and loading status Square climb strips 20 x 20 mm, every 200 mm on the outer frame of the loading area bevel On the checker plates, above the kingpin and the loa

Stav: nový, pohotovostná hmotnosť: 9 500 kg, maximálna hmotnosť nákladu: 35 500 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 500 mm, šírka ložného priestoru: 2 540 mm, zavesenie: vzduch, veľkosť pneumatiky: 435/50 R 19.5, farba: sivý, prevádzková hmotnosť: 9 500 kg, Výbava: ABS, Nakladacia plocha v vysunuteľnom vyhotovení: Nakladacia plocha s tvrdými drevenými doskami so zadnou skosením cca 1.000 mm x 8° 1 pár pevne zabudovaných kolísk na kolesá, cca 1.610 x 970 x 400 mm 2 páry upevňovacích krúžkov (LC 5.000 daN) 1 pár upevňovacích krúžkov (LC 10.000 daN) 6 párov smerom von sklopných upevňovacích krúžkov (LC 5.000 daN) 2 páry smerom von sklopných upevňovacích krúžkov (LC 10.000 daN) Výrezy v vonkajšom ráme nakladacej plochy na upevnenie napínacích pásov (LC 2.000 daN) Brzdový systém: Brzdový systém podľa noriem EÚ s EBS-E (2S2M) Lak: Prvotriedna a odolná ochrana proti korózii štandardne guľôčkovo tryskanej zváranej konštrukcie vďaka 2-komponentnej (2K) zinkovej základnej vrstve s práškovým zinkom Vysokokvalitný 2-komponentný (2K) vrchný náter v jednej farbe v odtieni Novagrau Zadná časť metalizovaná a lakovaná v RAL 9010 (čistá biela) Metalický lak nie je možný Návesové podpery: JOST návesové podpery (mechanické) s 2-rýchlostnou prevodovkou, nosnosť 24 t (skúšobná záťaž 50 t) Oceľová konštrukcia: Oceľová konštrukcia z vysokopevnostnej jemnozrnnej ocele Kvalita ocele: S355J2+N/S355MC (medza klzu 355 MPa) S690QL/S700MC (medza klzu 690 MPa) Elektrická inštalácia: Elektrická inštalácia podľa noriem EÚ, osvetlenie 24 voltov Zásuvky 24N, 24S & 15-kolíková Nápravy a pneumatiky: BPW nápravy, vzduchovo odpružené, s kotúčovými brzdami (377 mm), s funkciou zdvíhania/spúšťania Samosmerovacie nápravy s elektro-magnetickou spätnou blokáciou, aktivovanou spiatočkou alebo manuálne Nápravové náradie Pneumatiky 435/50 R 19.5 Zahrnuté príslušenstvo: Iedok Eammopfx Ad Aotf Na pozinkovanej prednej prípojnici žlto-červené vzduchové spojky 4 kusy klinov s držiakom 2" kónusový čap Pozinkovaná čelná stena z ocele, výška cca 1600 mm. EN12642-XL Biela reflexná páska podľa predpisov EÚ po bokoch, na výsuvu a vzadu červená Nakladacia plocha so silnou podlahou z tvrdého dreva 9 párov zásuvných vreciek na stĺpiky 100 x 50 mm vo vonkajšom ráme nakladacej plochy 1 držiak na rezervné koleso pod nakladacou plochou v smere jazdy vpravo Pozinkované výklopné podpery pod skosením nakladacej plochy Posuvné zavesovacie lišty na ALU nájazdové rampy na zadnej časti vozidla Európske reflexné tabule (červeno-žlté) na zadnej časti návesu Odstredivý záchyt na zadnej časti návesu Držiak na výstražné svetlo na zadnej časti návesu Na labutom krku a na zadnom nosníku naľavo a napravo držiak na výstražné tabule vrátane zásuvky HDPE náradový box 620x360x610 pod nakladacou plochou v smere jazdy naľavo 4 páry WADER kontajnerových vreciek v nakladacej ploche pre 1x 20ft-kontajner alebo 1x 40ft-kontajner, vo výsuve je pripravené ďalšie uzamknutie pre 45ft-kontajner 3 páry priečnych zásuvných líšt na stĺpiky 100 x 50 mm Zdvihacia náprava na prednej náprave s riadením cez TEBS E v závislosti na aktuálnom zaťažení náprav a aktuálnom stave naloženia Rýchlostná nálepka 80 km/h vzadu a na oboch stranách Štyri približne o 400 mm vysúvateľné výstražné tabule cca 423 x 423 mm s LED pozičnou lampou. Na výstražných tabuliach držiak pre výstražné svetlo Manometer na meranie záťaže na nápravy vrátane diagramu zaťaženia HRM metalizácia (High Resistance Metallisation) vonkajšieho rámu Kompletná oceľová konštrukcia guľôčkovo tryskaná, následne definované viditeľné plochy metalizované

Stav: nový, maximálna hmotnosť nákladu: 38 800 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5 3PMSF, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck with chamfered front corners at 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable loading platform: - Extendable loading platform with rear chamfer approx. 1,000 mm x 8° - 6 pairs of outward-folding lashing rings (LC 5,000 daN) - 3 pairs of outward-folding lashing rings (LC 10,000 daN) - 1 pair of flat-mounted lashing rings at the front of the loading area (LC 10,000 daN) - Cut-outs in the outer frame of the loading platform for securing straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, over the axles with anti-slip chequer plate Axles and tires: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lowering valve - Axle tools - 235/75 R 17.5 3PMSF Brake system: Itodpfxouqlmno Ad Aef - WABCO brake system according to EU regulations with EBS-E (2S2M) Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox, 24t lifting capacity (50t test load) Included accessories: - One spare wheel with holder in front of the bulkhead - 2-inch king pin - Galvanized steel bulkhead, approx. 400 mm high - Yellow and red air couplings on the galvanized front connector strip - 4 wheel chocks with holders at the bulkhead - Mount for rotating beacon at the rear of the trailer - Receptacle at the rear of the gooseneck for ALU approach ramps - Galvanized folding supports under the chamfer of the loading platform - Cover plates for bridging the gap between ramps and platform - White reflective tape according to EU regulations on sides, extension, and red at the rear - Electro-hydraulic unit positioned at the rear, under the platform - On the gooseneck and ramps, left and right, mounts for warning signs including power socket - Control valves for the ramps installed on the right side of the trailer - One mud flap at the rear of the trailer - User manual and documentation on USB stick - ALU side walls and rear wall approx. 2,440 x 400 mm on the gooseneck - The rear, galvanized plug-in stanchions are removable (structure length approx. 2,560 mm) - Four extendable warning signs approx. 423 x 423 mm with position light, extendable by approx. 400 mm - 3 pairs of WADER container pockets in the platform suitable for a 20ft, 30ft, or 40ft container - 6 pairs of 100x50 mm stanchion pockets in the external frame of the loading platform - Galvanized side extensions, extendable by approx. 230 mm per side - 20 x 20 mm square lashing rails every 200 mm on the external frame of the platform's chamfer - Anti-slip sand coating, painted on chequer plates above the king pin and on the loading platform - Mount for rotating beacon on warning signs - European reflective boards (red-yellow) at the rear of the trailer - 80 km/h speed stickers at the rear and both sides - Load manometer for axle load measurement including load diagram - HRM metallization (High Resistance Metallisation) of the external frame - Complete steel structure shot-blasted, then all defined visible surfaces hot-metal sprayed with ZINACOR 850 (zinc 85% - aluminum 15%)

Stav: nový, pohotovostná hmotnosť: 10 600 kg, maximálna hmotnosť nákladu: 39 400 kg, celková hmotnosť: 50 960 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 760 mm, zavesenie: vzduch, veľkosť pneumatiky: 205/65 R17.5, farba: sivý, prevádzková hmotnosť: 10 600 kg, Výbava: ABS, Gooseneck: - Gooseneck with 30 mm hardwood floor - Gooseneck in straight design at the rear - 3 pairs of lashing rings (LC 5,000 daN) Extendable loading area: - Loading area in extendable version - 5 pairs of lashing rings foldable outwards - 3 pairs of lashing rings foldable outwards - 1 pair of lashing rings laid flat at the front of the loading area - Cut-outs in the outer frame of the loading area for attaching tension belts - Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering Landing legs: - JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and tyres: - BPW axles, two rigid, two trailing steering axles - Air suspension, with drum brakes, with lifting/lowering function - The trailing steering axles with electro-magnetic reversing lock, can be activated either via reverse gear or manually Itodpfot Ag Uwex Ad Aef - Axle tools - Tyres 205/65 R17.5 Brake system: - Brake system in accordance with EU regulations with EBS-E (4S3M) Steel construction: - Steel construction made of high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system in accordance with EU regulations, 24-volt lighting, ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets - Connections according to ISO: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Paintwork: - First-class and long-lasting corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) top coat, single-colour in Novagrau - Rear section metalized and painted in RAL 9010 (pure white) Included accessories: - One spare wheel with holder in front of the front wall - 2" kingpin - Galvanized steel front wall approximately 400 mm high - Yellow-red air couplings on the galvanized connection bar at the front - 4 wheel chocks with holders on the front wall - Galvanized folding supports under the sloped loading area - Bracket for a revolving beacon at the rear of the trailer - Galvanized, extendable width approx. 230 mm per side - White reflective tape to EU regulations on the side, at the extension, and red at the rear - At the gooseneck and on the rear plate, left and right, one bracket for warning signs each, including socket - European reflective warning plates (red-yellow) at the rear of the trailer - TPMS tyre pressure monitoring system according to ECE R 141 - On the gooseneck, plug-in aluminium side and rear panels approx. 2,440 x 400 mm - The rear, galvanized plug-in stakes are removable, length of the structure approx. 2,560 mm - 7 pairs of WADER container locks - 1x 20ft container on the loading area; 1x 40ft container on the loading area; 1x 40ft container above the gooseneck; 2x 20ft containers - 7 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area - Lift axle at the front axle controlled by TEBS E, depending on current axle load and load condition - Movable hanging bar for aluminium approach ramps at the rear of the vehicle - On checker plates on the gooseneck and loading area, a painted-in sand layer as anti-slip protection - Four warning signs each extendable by approx. 400 mm, size approx. 423 x 423 mm, with position light - On warning signs, bracket for rotating beacon - 80 km/h speed stickers on the rear and both sides - Load manometer for determining axle l