Nízky nakladač

Faymonville MAX Trailer 5-Achs-Tele-Semi mit hydr. Rampen

Gooseneck:
Gooseneck with rear bevel of approx. 750 mm x 10°
3 pairs of lashing rings
30 mm thick hardwood flooring

Loading Area:
Extendable loading area with rear bevel of approx. 500 mm x 8°
8 pairs of folding outward lashing rings
1 pair of flat lashing rings at the front of the loading area
Cutouts in the outer frame of the loading area for securing load straps
Approx. 48 mm thick hardwood flooring, non-slip checker plate cover above the axles

Two-piece Steel Ramps:
One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering. Ramp parts are hydraulically foldable, equipped with hydraulic lifting mechanism and hydraulic lateral adjustment. Maximum load per pair: 50,000 kg.

Landing Legs:
• JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load)

Axles and Tyres:
BPW axles and suspension, 4th and 5th axle steering
Technical axle load: 12,000 kg
4th and 5th axles with electromagnetic reverse lock activated via reverse gear and manual operation
Tyres 235/75 R 17.5 3PMSF

Braking System:
Braking system according to EU regulations with EBS-E (4S3M)

Sockets and Lighting:
Electrical system according to EU regulations, 24-volt lighting
ASPÖCK-NORDIK (ASS3)
ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets
Connections according to ISO:
24N ISO-1185
24S ISO-3731
15-pin ISO-12098

Paintwork:
First-class and durable corrosion protection, achieved by standard shot-blasted welded frame with a 2-component (2K) zinc dust primer
High-quality single color 2-component (2K) topcoat in MB 7350 Novagrau
Rear section metallized and painted in RAL 9010 (Pure White)
Metallic lacquer not available

Steel Structure:
Steel construction made from high-strength fine-grained steels
Steel grades:
S355J2+N/S355MC (yield strength 355MPa)
S690QL/S700MC (yield strength 690MPa)

Accessories:
One spare wheel with bracket in front of the bulkhead
2" kingpin
Galvanized steel front wall approx. 400 mm high
Yellow-red air couplings on the galvanized front connector strip
2 wheel chocks with holders on the front wall
Provision at the rear of the gooseneck for ALU drive-on ramps
Bracket for a beacon at the rear of the trailer
Galvanized supports under the rear bevel of the loading area
White reflector tape according to EU regulations on the sides, at the extension and rear red
Electro-hydraulic unit at the rear under the loading area
On gooseneck and rear panel (left and right) bracket for warning signs incl. socket
Control valves for the ramps installed on the right side of the trailer
Rodpfol Sl Izjx Ab Nsch
A mud flap at the rear of the trailer
Manual and description on USB stick
3.5" kingpin supplied loose
On the gooseneck, plug-in ALU side walls and rear wall approx. 2,440 x 400 mm (LxH)
Rear galvanized plug-in stakes are removable
(Length of the structure approx. 2,560 mm)
3 pairs of WADER container pockets on the loading area for one 20' (30') or a 40' container
6 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading area
Galvanized extensions, extendable by approx. 230 mm per side
Lifting axle on the front axle, control via TEBS-E depending on current axle load and loading status
Square climb strips 20 x 20 mm, every 200 mm on the outer frame of the loading area bevel
On the checker plates, above the kingpin and the loa

Inzercia bola automaticky preložená a vyskytli sa nejaké chyby prekladu.