Ts2018Taz Tele-Absetzanlage kúpiť použité (1 725)

Stav: nový, maximálna hmotnosť nákladu: 49 000 kg, celková hmotnosť: 60 800 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 r 17.5, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck with chamfered front corners at 45° and rear chamfer of approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable Loading Area: - Extendable loading area with rear chamfer of approx. 1,000 mm x 8° - 5 pairs of fold-out lashing rings on the outside (LC 5,000 daN) - 3 pairs of fold-out lashing rings on the outside (LC 10,000 daN) - 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) - Cut-outs in the external frame of the loading area for attaching tie-down straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, with chequered plate covering over the axles Detachable Two-Part Ramps: - One pair of galvanized, two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood overlay - Ramps with hydraulically folding ramp sections, hydraulic lift and hydraulically adjustable side shift - Max. load per pair: 40,000 kg Duodpoh Etf Refx Acpeu Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and Tyres: - BPW axles, two rigid axles, two self-steering axles, air-suspended, with drum brakes, lifting/lowering function - The self-steering axles can be locked via electromagnetic reverse lock through reverse gear or manually - Axle tools - Tyres: 235/75 R 17.5 Brake System: - Brake system in accordance with EU regulations with EBS-E (4S3M) Steel Construction: - Steel construction made from high-strength fine-grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Paintwork: - Premium and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc-rich primer - High-quality 2-component (2K) topcoat in single-tone Novagrey Electrical System: - Electrical system according to EU regulations, ASPÖCK-NORDIK (ASS3) 24 Volt lighting - ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets Included Accessories: - 2" king pin - One galvanized steel front wall, approx. 400 mm high - One spare wheel with holder in front of the front wall - Yellow and red air couplings on galvanized front terminal strip - 4 wheel chocks with holder on the front wall - Mounting at the rear of the gooseneck for ALU approach ramps - Galvanized folding supports under the chamfered loading area - Bracket for a rotating beacon - Cover plates to bridge the gap between ramps and loading area - White reflective tape according to EU regulations on the sides, red at the rear and on the extension - Electro-hydraulic power unit - At the gooseneck and on the ramps, left and right, each with mounting for warning panels including socket - Control valves for the ramps mounted on the right side of the semi-trailer - Mudflap at the rear of the trailer - User manual and description on USB stick - Removable ALU side boards and rear panel on the gooseneck, approx. 2,440 x 400 mm - Rear galvanized stanchions removable (body length approx. 2,560 mm) - 4 pairs of WADER container pockets in the loading area for a 20 ft, 2x 20 ft or a 40 ft container - 7 pairs of stake pockets for 100 x 50 mm stakes in the external frame of the loading area - Extensions, galvanized, retractable by approx. 230 mm per side - Lift axle on the front axle with control - 20 x 20 mm square climbing strips - BEKAMAX central lubrication system - Four warning panels extendable by approx. 400 mm (approx. 423 x 423 mm)

Stav: nový, pohotovostná hmotnosť: 15 450 kg, maximálna hmotnosť nákladu: 65 550 kg, celková hmotnosť: 80 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 21 900 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 925 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17.5, farba: sivý, Výbava: ABS, Gooseneck: Gooseneck in SNT design to optimize the loading area length, approximately 3,700 mm long, rear with a bevel of approx. 1,000 mm x 10°. Technical fifth wheel load: 30,000 kg. Suitable for tractor units: 4x2, 6x2, and 6x4. Loading area: Loading area in double-extendable design, approx. 8,800 mm long with a rear bevel of approx. 500 mm x 10°. The central beam features a support table approx. 300 mm wide with long holes at the front and rear for the attachment and repositioning of optional bridging elements, welded in place. Pneumatic locking mechanism with conical locking bolts and reinforced locking positions, the supply lines are safely routed within the extendable beams and automatically adjust to the respective platform length. Axles and tyres: BPW axles and suspension, first axle steered ahead, all other axles hydro-mechanically forced-steered. First axle with electromagnetically actuated reverse lock via reverse gear and manual activation. Technical axle load: 12,000 kg. Air suspension with raise and lower valve. Manufacturer at our discretion. Sockets and lighting: 24-volt lighting system in accordance with EU regulations. ASPÖCK-UNIBOX at the front connection rail with 24N, 24S & 15-pin sockets. Complete HRM metallisation. Complete steel construction shot-blasted, then finished with ZINACOR 850 hot-dip coating. Painting: 6-stage final treatment: Entire steel structure shot-blasted post-welding. One coat zinc-based primer, one coat adhesion primer. Final coating with two coats of 2-component paint, single-tone in DB 7350 Novagrau, followed by sealing of cavities with special wax. Accessories: Detachable steel front wall, approx. 400 mm high. Supply line connection rail to tractor unit mounted at height of outer frame profile. ASPÖCK-UNIBOX at front connection rail with 24N, 24S & 15-pin sockets. Should your pin assignment differ from ISO connector standard, please inform us. 3 kW electric-hydraulic unit to operate hydraulic functions (excluding hydraulic winches). On the gooseneck: one pair of detachable ALU side walls, approx. 400 mm high, anodised finish. 3.5" king pin. Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide. 2 wheel chocks with holders in front of the front wall. Mechanical landing gear with 2-speed gearbox and hand crank. Control valves for hydraulic ramps on the right side of the vehicle. One pair of mechanical rear supports. Central lubrication system with 1 pump, BEKAMAX brand, standard grease per NLGI-2. Removable protector for the central lubrication pump(s). Remote axle steering from front and rear via cable remote control with push buttons, featuring axle alignment monitoring, without installation in tractor unit. Below gooseneck and at the end cross member, one 7-pin socket with warning sign holder each on left and right. One 7-pin socket at the end cross member. User manual and documentation included. Single-piece INOX toolbox, approx. 2,480 x 340 x 390 mm, straight design. Please note: Special equipment and accessories may increase curb weight and thus reduce payload accordingly. Warning package: 4 warning signs, approx. 423 x 423 mm, extendable by approx. 1,000 mm, incl. 2 LED position lights and brackets for beacon. Duedporigw Rofx Acpeu

Stav: nový, pohotovostná hmotnosť: 10 600 kg, maximálna hmotnosť nákladu: 39 400 kg, celková hmotnosť: 50 960 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 760 mm, zavesenie: vzduch, veľkosť pneumatiky: 205/65 R17.5, farba: sivý, prevádzková hmotnosť: 10 600 kg, Výbava: ABS, Gooseneck: - Gooseneck with 30 mm hardwood floor - Gooseneck in straight design at the rear - 3 pairs of lashing rings (LC 5,000 daN) Extendable loading area: - Loading area in extendable version - 5 pairs of lashing rings foldable outwards - 3 pairs of lashing rings foldable outwards - 1 pair of lashing rings laid flat at the front of the loading area - Cut-outs in the outer frame of the loading area for attaching tension belts - Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering Landing legs: - JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and tyres: - BPW axles, two rigid, two trailing steering axles - Air suspension, with drum brakes, with lifting/lowering function - The trailing steering axles with electro-magnetic reversing lock, can be activated either via reverse gear or manually - Axle tools - Tyres 205/65 R17.5 Brake system: - Brake system in accordance with EU regulations with EBS-E (4S3M) Steel construction: - Steel construction made of high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system in accordance with EU regulations, 24-volt lighting, ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets - Connections according to ISO: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Paintwork: - First-class and long-lasting corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) top coat, single-colour in Novagrau - Rear section metalized and painted in RAL 9010 (pure white) Included accessories: - One spare wheel with holder in front of the front wall - 2" kingpin - Galvanized steel front wall approximately 400 mm high - Yellow-red air couplings on the galvanized connection bar at the front - 4 wheel chocks with holders on the front wall - Galvanized folding supports under the sloped loading area - Bracket for a revolving beacon at the rear of the trailer - Galvanized, extendable width approx. 230 mm per side - White reflective tape to EU regulations on the side, at the extension, and red at the rear - At the gooseneck and on the rear plate, left and right, one bracket for warning signs each, including socket - European reflective warning plates (red-yellow) at the rear of the trailer - TPMS tyre pressure monitoring system according to ECE R 141 - On the gooseneck, plug-in aluminium side and rear panels approx. 2,440 x 400 mm - The rear, galvanized plug-in stakes are removable, length of the structure approx. 2,560 mm - 7 pairs of WADER container locks - 1x 20ft container on the loading area; 1x 40ft container on the loading area; 1x 40ft container above the gooseneck; 2x 20ft containers - 7 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area - Lift axle at the front axle controlled by TEBS E, depending on current axle load and load condition - Movable hanging bar for aluminium approach ramps at the rear of the vehicle - On checker plates on the gooseneck and loading area, a painted-in sand layer as anti-slip protection - Four warning signs each extendable by approx. 400 mm, size approx. 423 x 423 mm, with position light - On warning signs, bracket for rotating beacon Dodpfxot Ag Uwe Acpjuu - 80 km/h speed stickers on the rear and both sides - Load manometer for determining axle l

Stav: nový, pohotovostná hmotnosť: 12 000 kg, maximálna hmotnosť nákladu: 54 000 kg, celková hmotnosť: 66 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 245/70 R 17.5, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable loading platform design: - Extendable loading platform with rear chamfer approx. 1,000 mm x 8° - 5 pairs of fold-out lashing rings (LC 5,000 daN) - 3 pairs of fold-out lashing rings (LC 10,000 daN) - 1 pair of recessed lashing rings in the front loading area (LC 10,000 daN) - Cut-outs in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) - Hardwood flooring approx. 48 mm thick, over the axles with tread plate covering Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox, 24 t lifting capacity (50 t test load) Brake system: - WABCO braking system compliant with EU regulations with EBS-E (4S3M) Djdoykpbkepfx Acpsuu Steel structure: - Steel structure made from high-strength fine-grained steels Axles and tyres: - BPW axles and suspension, 1st axle rigid, all other axles hydro-mechanically forced-steered - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Axle tool - TPMS tyre pressure monitoring system in accordance with ECE R 141 - Tyres 245/70 R 17.5 3PMSF Accessories included: - 2" king pin - Galvanised steel front wall approx. 400 mm high - At the galvanised front connection plate: yellow-red air couplings - 4 wheel chocks with holder on the front wall - 1 spare wheel with holder in front of the front wall - Electro-hydraulic power unit - Forced steering, front and rear, operated via cable remote control with push buttons, with tracking control for the axles - European reflector plates (red-yellow) at the rear of the trailer - White reflective tape on the sides and the extension, red at the rear, in accordance with EU regulations - On gooseneck and rear left and right: holder for warning boards including socket - Galvanised, extendable width extensions, ca. 230 mm per side - Holder for beacon at the rear of the trailer - Galvanised folding supports under the rear chamfer of the loading platform - Mudflap at the rear - Operating manual and description on USB stick - Central lubrication system BEKAMAX (Pico) with standard lubrication grease NLGI-2 and removable guard around the pump - Plug-in ALU side boards and rear board on the gooseneck approx. 2,440 x 400 mm - Rear galvanised stakes are removable (body length approx. 2,560 mm) - INOX toolbox 1,350x400x400 on the gooseneck (note: box covers oil filler cap) - 4 pairs of WADER container pockets in the loading area for 1x 20ft, 2x 20ft, 1x 40ft, or 1x 45ft container - 7 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area - Sliding hook-in crossbar for ALU drive-on ramps at the rear - Square climbing bars 20 x 20 mm every 200 mm on the outside frame of the rear chamfer - Lift axle on the front axle with control via TEBS-E depending on axle load and current loading condition - Four warning boards extendable by approx. 400 mm, approx. 423 x 423 mm with a position light - Holder for beacon on the warning boards - Radio remote control for forced steering, in addition to cable remote, with indicator lights on receiver as single-track control - Non-slip sand coating painted onto tread plates on gooseneck and loading area - Speed stickers 80 km/h at the rear and on both sides - Load gauge for determining axle loads, including load diagram

Stav: nový, pohotovostná hmotnosť: 14 350 kg, maximálna hmotnosť nákladu: 53 450 kg, celková hmotnosť: 67 800 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 800 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Výbava: ABS, zdvíhacie čelo, Swan neck: - Swan neck in SNT design to optimize the loading platform length, approx. 3,700 mm long - Swan neck at the rear with a taper, approx. 1,000 mm x 10° - Suitable for tractor units: 6x2, 6x4, 8x4 short Loading platform: - Extendable loading platform, approx. 8,800 mm long, with a rear taper of approx. 500 mm x 10° - Recess in the loading platform, including into the taper, to accommodate the excavator stick, approx. 3,850 x 750 x 210/290 mm Two-piece steel ramps: - One pair of two-piece steel ramps, approx. 4,350 mm long and approx. 900 mm wide - Ramps with rubber lining - Ramps can be hydraulically moved individually approx. 235 mm outward and approx. 215 mm inward - "Super Grip" rubber flooring 25 mm and metal flooring approx. 5 mm as additional reinforcement on the platform’s taper - Square climbing strips 20 x 30 mm, spaced approx. every 200 mm along the external ramp frame Axles, suspension, and tyres: - BPW axles and suspension, first axle steering ahead, all other axles hydromechanically forced-steered - Technical axle load: 12,000 kg - First axle with electromagnetic reverse lock, activated by reverse gear and manually selectable - Air suspension with lift and lower valve - Tyres 235/75 R 17.5 - TPMS tyre pressure monitoring system according to ECE R141 - TPMS sensors mounted in all wheels including spare wheels Surface treatment: - Complete steel construction shot-blasted after welding using a shot blasting plant - Second round of blasting with corundum for optimum coating adhesion Duodjya E A Nspfx Acpsu - HRM-metallisation of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection - Final painting with 2 coats of 2K top coat in single colour MB 7350 Novagrau Accessories included: - Plug-in steel front wall, approx. 400 mm high - 3kW electro-hydraulic power unit for controlling hydraulic functions, excluding hydraulic winches - 1 spare wheel - External member on the swan neck with mounting holes for boltable lashing rings - First hole approx. 200 mm from the front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - 1 pair of horizontal lashing rings at the rear of the swan neck - On the swan neck: 1 pair of plug-in ALU side walls, approx. 400 mm high, anodised - On the swan neck: one plug-in ALU rear wall, approx. 400 mm high, anodised - Over the swan neck approx. 40 mm thick hardwood flooring, over the king pin area treadplate covering - 2" king pin - Round NATO socket on the front connection strip - 4 wheel chocks - 1 intermediate table, approx. 300 mm wide - 1 pair of lashing rings on the front cross member - 8 pairs of recessed lashing rings in the outer frame of the platform, foldable to the outside - Extendable (galvanised) widenings by approx. 230 mm each side - Wheel recesses with square climbing strips, 15 x 15 mm before the axles, open all the way to the swan neck cross member, approx. 700 x 410 mm - Wheel recesses with square climbing strips, 15 x 15 mm between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm - ALU covers for the wheel recesses, which can also be used as bridging elements for the extension or as widening planks - 1 pair of mechanical rear supports - Radio and cable remote control - Lift axle on the front axle - Square climbing strips 20 x 30 mm, approx. every 200 mm - Central lubrication system with 1 pump - Wabco Smart Board system - 4 warning panels, approx. 423 x 423 mm, extendable by approx. 400 mm

Stav: nový, pohotovostná hmotnosť: 9 300 kg, maximálna hmotnosť nákladu: 38 700 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 1 200 mm, zavesenie: vzduch, veľkosť pneumatiky: 385/65 R 22,5, farba: sivo-čierny, Výbava: ABS, Ložná plocha: • Výsuvná ložná plocha s pneumaticky ovládaným uzávěrem • Ložná plocha s cca 30 mm silnou podlahou z dřevěného masivu • 7 párů vyklápěcích vázacích ok směrem ven (LC 5 000 daN) • 3 páry vyklápěcích vázacích ok směrem ven (LC 10 000 daN) • Výřezy ve vnějším rámu ložné plochy pro zavěšení upínacích pásů (LC 2 000 daN) Nápravy a pneumatika: • Nápravy BPW a odpružení, všechny nápravy hydro-mechanicky nuceně řízené • Se kotoučovými brzdami • Technické zatížení nápravy: 10 000 kg • Vzduchové odpružení s ventilem pro zvedání a spouštění • Nářadí pro nápravy • Pneumatiky: 385/65 R 22,5 • Systém kontroly tlaku v pneumatikách TPMS dle ECE R 141 Brzdový systém: • Brzdový systém WABCO dle předpisů EU s EBS-E (2S2M) Elektrické zařízení: • Elektrická instalace dle předpisů EU, osvětlení 24 V ASPÖCK-NORDIK (ASS3) • ASPÖCK-UNIBOX na připojovací liště vpředu se zásuvkami 24N, 24S & 15-pin • Připojení dle ISO • 24N ISO-1185 • 24S ISO-3731 • 15-pin ISO-12098 Příslušenství v ceně: • Řízení zadní nápravy zepředu a zezadu pomocí kabelového dálkového ovládání s tlačítky, s kontrolou jedné stopy náprav • 4x zajišťovací klíny s držákem na čelní stěně • 2" královský čep • 1x pozinkovaná čelní stěna z oceli, cca 1 600 mm vysoká • Na pozinkované připojovací liště vpředu žluto-červené vzduchové spojky • Bílé reflektorové pásky dle EU na bocích, výsuvu a vzadu na návěsu v červené barvě • Evropské reflektorové štítky (červeno-žluté) vzadu na návěsu • 1x zástěrka vzadu na návěsu • Návod k obsluze a popis • Držák pro výstražné světlo vzadu na návěsu Dujdpfx Acsiu Etrjpju • Ložná plocha s cca 30 mm silnou dřevěnou podlahou zakrytá Omega-profily • 10 párů kapes na sloupky pro zasouvací sloupky 100 x 50 mm ve vnějším rámu ložné plochy • 1x držák rezervního kola pod ložnou plochou vpravo ve směru jízdy • Elektrohydraulická jednotka • Na labutím krku a zadní části vlevo i vpravo držák výstražných štítů včetně zásuvky • Na centrálním nosníku lakovaná vrstva písku jako ochrana proti smyku • 6 párů kontejnerových kapes WADER v ložné ploše, pro 1x 20ft, 2x 20ft nebo 1x 40ft kontejner, u výsuvu další uzamykací bod pro 45ft kontejner • 4 páry příčných kapes pro sloupky 100 x 50 mm v ložné ploše • Montovaná nástupní žebřík vpravo ve směru jízdy • 1x box na nářadí z HDPE cca 1 200 x 500 x 480 mm vpředu pod ložnou plochou vlevo ve směru jízdy • Centrální mazací zařízení BEKAMAX (Pico) s odnímatelným krytem čerpadla • Zvedací náprava na přední nápravě s ovládáním přes TEBS E v závislosti na aktuálním zatížení nápravy a stavu naložení • Bezdrátové dálkové ovládání pro řízení náprav navíc ke kabelovému ovládání, s kontrolkami na přijímači pro kontrolu jedné stopy • Čtyři výsuvné výstražné tabule cca 400 mm, cca 423 x 423 mm s pozičním světlometem • Na výstražných tabulích držák pro výstražné světlo • Nálepky s omezením rychlosti 80 km/h vzadu a na obou stranách • Manometr pro měření zatížení náprav včetně zatěžovacího diagramu • Metalizace HRM (High Resistance Metallisation) vnějšího rámu • Celá ocelová konstrukce tryskána, poté definované viditelné plochy metalizované a žárově upraveny ZINACOR 850 (zinek 85 % - hliník 15 %)

Stav: nový, pohotovostná hmotnosť: 22 700 kg, maximálna hmotnosť nákladu: 79 300 kg, celková hmotnosť: 102 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 11 000 mm, šírka ložného priestoru: 2 850 mm, výška ložného priestoru: 920 mm, veľkosť pneumatiky: 245/70 R 17.5, farba: sivý, prevádzková hmotnosť: 22 700 kg, Výbava: ABS, Swan neck: - Swan neck in SNT design for optimizing the loading platform length, approx. 3,750 mm long, with rear chamfer approx. 850 mm x 10° - Hydraulically raisable and lowerable, lifting stroke ± 250 mm including hydraulic connection linked to the hydraulic axle compensation of the first two axles - Open at the rear third - Suitable for tractor units: 6 x 4 and 8 x 4 Loading platform: - Extendable loading platform, approx. 11,000 mm long with rear chamfer approx. 500 mm x 10°. - Recess in the loading platform including in the bevel for accommodating the excavator bucket arm, approx. 4,240 x 900 x 440 mm - Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the respective platform length Ramps: - Pair of two-part steel ramps, approx. 4,650 mm long and 900 mm wide - Hydraulically foldable ramp tips - Ramps hydraulically adjustable sideways approx. 235 mm outward and approx. 215 mm inward, individually - "Super Grip" rubber surface 25 mm and steel plate approx. 5 mm as additional reinforcement on the loading platform bevel - Rectangular climbing strips 20x30 mm, approx. every 200 mm on the outer ramp frame Djdpfx Acek Af Svspeuu Axles, suspension and tyres: - PA-X axle system, all axles force-steered hydro-mechanically - Steering behavior of the first two axles can be optimally adjusted to the loading platform length, both mechanically and hydraulically - Hose rupture valve on the axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pins for securing in raised position - 245/70 R 17.5 3PMSF Accessories included: - Removable steel front wall, approx. 400 mm high - Supply line connection strip for tractor unit, mounted at the height of the outer frame profile - 1 spare wheel - Outer beams of the swan neck with mounting holes for screwable lashing rings - First hole approx. 200 mm from front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - Tread plate covering over the swan neck - On the swan neck, 1 pair of removable ALU side walls, approx. 400 mm high, anodized - Removable ALU rear wall on the swan neck, approx. 400 mm high, anodized - 3.5" king pin / 2" king pin mounted - Guide plate on the swan neck for the fifth wheel, approx. 500 mm wide - 4 wheel chocks - 4 axle load gauges - Mechanical drop supports at the front - 1-piece INOX toolbox, approx. 2,480 x 340 x 390 mm - Mechanical drop supports at the front - Continuous steel plate covering on the loading platform with painted-on sand layer as slip protection - 1 intermediate table, approx. 500 mm wide, for extension, with elongated holes for insertable and repositionable bridging elements - Painted-on sand coating on the support surfaces of the intermediate table - Mechanical lock for locking the intermediate table when extended - 8 pairs of stake pockets in the outer frame - Extendable galvanized widening sections, approx. 230 mm per side - 1 pair of hydraulic rear supports - Central lubrication system - 1 reversing spotlight each on the left and right at the rear of the vehicle - 3 kW electric-hydraulic power unit - Loose widening planks in reinforced steel U-profile frame - Radio and cable remote control - 4 warning signs, approx. 423 x 423 mm

Stav: nový, maximálna hmotnosť nákladu: 38 800 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5 3PMSF, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck with chamfered front corners at 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable loading platform: - Extendable loading platform with rear chamfer approx. 1,000 mm x 8° - 6 pairs of outward-folding lashing rings (LC 5,000 daN) - 3 pairs of outward-folding lashing rings (LC 10,000 daN) - 1 pair of flat-mounted lashing rings at the front of the loading area (LC 10,000 daN) - Cut-outs in the outer frame of the loading platform for securing straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, over the axles with anti-slip chequer plate Axles and tires: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load: 12,000 kg Dusdpfsuqlmnex Acpeu - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lowering valve - Axle tools - 235/75 R 17.5 3PMSF Brake system: - WABCO brake system according to EU regulations with EBS-E (2S2M) Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox, 24t lifting capacity (50t test load) Included accessories: - One spare wheel with holder in front of the bulkhead - 2-inch king pin - Galvanized steel bulkhead, approx. 400 mm high - Yellow and red air couplings on the galvanized front connector strip - 4 wheel chocks with holders at the bulkhead - Mount for rotating beacon at the rear of the trailer - Receptacle at the rear of the gooseneck for ALU approach ramps - Galvanized folding supports under the chamfer of the loading platform - Cover plates for bridging the gap between ramps and platform - White reflective tape according to EU regulations on sides, extension, and red at the rear - Electro-hydraulic unit positioned at the rear, under the platform - On the gooseneck and ramps, left and right, mounts for warning signs including power socket - Control valves for the ramps installed on the right side of the trailer - One mud flap at the rear of the trailer - User manual and documentation on USB stick - ALU side walls and rear wall approx. 2,440 x 400 mm on the gooseneck - The rear, galvanized plug-in stanchions are removable (structure length approx. 2,560 mm) - Four extendable warning signs approx. 423 x 423 mm with position light, extendable by approx. 400 mm - 3 pairs of WADER container pockets in the platform suitable for a 20ft, 30ft, or 40ft container - 6 pairs of 100x50 mm stanchion pockets in the external frame of the loading platform - Galvanized side extensions, extendable by approx. 230 mm per side - 20 x 20 mm square lashing rails every 200 mm on the external frame of the platform's chamfer - Anti-slip sand coating, painted on chequer plates above the king pin and on the loading platform - Mount for rotating beacon on warning signs - European reflective boards (red-yellow) at the rear of the trailer - 80 km/h speed stickers at the rear and both sides - Load manometer for axle load measurement including load diagram - HRM metallization (High Resistance Metallisation) of the external frame - Complete steel structure shot-blasted, then all defined visible surfaces hot-metal sprayed with ZINACOR 850 (zinc 85% - aluminum 15%)

Stav: nový, pohotovostná hmotnosť: 15 900 kg, maximálna hmotnosť nákladu: 63 500 kg, celková hmotnosť: 68 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 12 700 mm, šírka ložného priestoru: 2 740 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75/r17,5, farba: sivý, prevádzková hmotnosť: 52 100 kg, Výbava: ABS, Gooseneck: Gooseneck in SNT design to optimize the loading area length, approx. 3,300 mm long, rear with chamfer approx. 1,000 mm x 10° Technical fifth-wheel load: 23,000 kg For tractor units: 6x2, 6x4, and 8x4 Loading Area: Extendable loading area, approx. 9,400 mm long with rear chamfer approx. 500 mm x 10° A recess in the loading area and chamfer for the excavator dipper stick, approx. 3,850 x 950 x 210/290 mm Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the respective loading length Axles and Tyres: BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanically forced-steered Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tools 235/75 R 17.5 3PMSF twin tyres Load index 143/141J (144/144F) Two-piece Steel Ramps: One pair of two-piece steel ramps approx. 4,350 mm long and approx. 900 mm wide Hardwood covering Hydraulically folding ramp tips; each ramp can be hydraulically shifted approx. 235 mm outward and approx. 215 mm inward Braking System: WABCO EBS-E brake system in accordance with EU regulations Sockets and Lighting: 24-volt lighting system Full Metallization: Complete HRM metallization with ZINACOR 850 for maximum corrosion protection Surface Treatment: Entire steel structure automatically blast-cleaned with shot wheels after welding Second blast cleaning with corundum for optimum coating adhesion Final painting in single-color Nova Gray with two coats of 2K paint; cavities then sealed with special wax Duedpfx Ajmfqi Iocpeu Rims in silver gray Steel Structure: Steel structure made of high-strength fine-grain steels Steel grades: S355J2+N/S355MC S690QL/S700MC Accessories: Detachable steel front wall, approx. 400 mm high Supply line connection rail for tractor unit Coiled cable to supply the electro-hydraulic power unit and/or electric winch between semi-trailer and tractor unit with plug; electro-hydraulic unit for controlling hydraulic functions, except hydraulic winches Gooseneck side members with mounting holes for bolted lashing rings First hole approx. 200 mm from the front, subsequently every approx. 400 mm A mounting hole in the upper rear area of the gooseneck side member for a bolted lashing ring Approx. 40 mm thick hardwood covering above the gooseneck, checker plate covering above the kingpin Guide plate from the gooseneck for the fifth-wheel plate, approx. 500 mm wide Continuous 50 mm thick hardwood covering on the loading platform and interrupted hardwood between the axles Loading platform locking with conically welded locating profiles every 250 mm, including prestressing plate Slotted holes for insertable and adjustable bridging elements: on the fixed part behind the gooseneck at the front of the loading area 1 movable intermediate table for the extension tube with large cross-section Control valves for hydraulic ramps on the right side of the vehicle Central lubrication system with 1 pump, with standard grease in accordance with NLGI-2 Radio remote control for operating the steering, in addition to the cable remote control; receiver features two indicator lights for single-track monitoring

Stav: nový, pohotovostná hmotnosť: 10 600 kg, maximálna hmotnosť nákladu: 35 400 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 500 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 940 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Výbava: ABS, Load platform: - Extendable load platform - Load platform with hardwood planks, rear bevel approx. 500 mm x 8° - 2 pairs of lashing rings (LC 5,000 daN) - 1 pair of lashing rings (LC 10,000 daN) - 6 pairs of fold-out lashing rings to the outside (LC 5,000 daN) - 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) - Cut-outs in the outer frame of the loading platform for attaching lashing straps Braking system: - Braking system according to EU regulations with EBS-E (2S2M) Paintwork: - First-class and durable corrosion protection for the standard shot-blasted welded frame, ensured by a two-component (2K) zinc dust primer - High-quality two-component (2K) top coat in single-color Nova Grey - Rear precisely metalized and painted in RAL 9010 (Pure White) - No metallic paint available Landing gear: - JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Steel construction: - Steel structure made of high-strength fine-grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355MPa) - S690QL/S700MC (yield strength 690MPa) Dujdsl Ux Rwopfx Acpsu Electrical system: - Electrical installation according to EU regulations, 24V LED lighting - 2x 7-pin and 15-pin sockets Axles and tyres: - BPW axles, air suspension, with disc brakes (377 mm), with raise/lower function - Hydro-mechanical forced steering - Axle tools - Twin tyres 235/75 R 17.5 Standard accessories: - Yellow-red air couplings on the galvanized front connection rail - 4 wheel chocks with holders - 2" king pin - Galvanized steel front wall, approx. 1600 mm high - White reflective tape according to EU regulations on the sides, on the extension, and red at the rear - Load platform with heavy-duty hardwood floor - Steering from front and rear via cable - Remote operation via push-button control, with axle steering alignment indicator - Radio remote control for rear steering - 9 pairs of stake pockets for 100 x 50 mm plug-in stakes on the outer frame of the load platform - Galvanized folding supports under the rear bevel of the platform - Movable hook-in rail for aluminium loading ramps at the rear of the vehicle - European reflective panels (red-yellow) at the rear of the trailer - One mud flap at the rear of the trailer - Rear beacon bracket - Warning sign brackets including sockets on the gooseneck and rear plate left/right - INOX toolbox 1500x390x810 mm under platform, right side direction of travel - BEKAMAX (Pico) central lubrication system with NLHI-2 standard grease and removable pump guard - 6 pairs of WADER container locks in the loading platform, for 1x 20ft container, 2x 20ft containers or 1x 40ft container, additional locking position provided in the extension for a 45ft container - 4 pairs of crosswise stake pocket rails in the loading platform for 100 x 50 mm plug-in stakes - Lifting axle on the front axle with TEBS control - depending on current axle load and load status - Speed stickers (80 km/h) on rear and both sides - Four warning signs, extendable by approx. 400 mm, approx. 423 x 423 mm with LED position lights - Bracket for beacon on warning signs - Load pressure gauge for axle load determination incl. load diagram - HRM metalizing (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, metalized with ZINACOR 850 (zinc 85% - alu 15%) and hot-finished at the defined visible areas

Stav: nový, pohotovostná hmotnosť: 9 500 kg, maximálna hmotnosť nákladu: 35 500 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 500 mm, šírka ložného priestoru: 2 540 mm, zavesenie: vzduch, veľkosť pneumatiky: 435/50 R 19.5, farba: sivý, prevádzková hmotnosť: 9 500 kg, Výbava: ABS, Nakladacia plocha v vysunuteľnom vyhotovení: Nakladacia plocha s tvrdými drevenými doskami so zadnou skosením cca 1.000 mm x 8° 1 pár pevne zabudovaných kolísk na kolesá, cca 1.610 x 970 x 400 mm 2 páry upevňovacích krúžkov (LC 5.000 daN) 1 pár upevňovacích krúžkov (LC 10.000 daN) 6 párov smerom von sklopných upevňovacích krúžkov (LC 5.000 daN) 2 páry smerom von sklopných upevňovacích krúžkov (LC 10.000 daN) Výrezy v vonkajšom ráme nakladacej plochy na upevnenie napínacích pásov (LC 2.000 daN) Brzdový systém: Brzdový systém podľa noriem EÚ s EBS-E (2S2M) Lak: Prvotriedna a odolná ochrana proti korózii štandardne guľôčkovo tryskanej zváranej konštrukcie vďaka 2-komponentnej (2K) zinkovej základnej vrstve s práškovým zinkom Vysokokvalitný 2-komponentný (2K) vrchný náter v jednej farbe v odtieni Novagrau Dodpfx Acsk Eammepouu Zadná časť metalizovaná a lakovaná v RAL 9010 (čistá biela) Metalický lak nie je možný Návesové podpery: JOST návesové podpery (mechanické) s 2-rýchlostnou prevodovkou, nosnosť 24 t (skúšobná záťaž 50 t) Oceľová konštrukcia: Oceľová konštrukcia z vysokopevnostnej jemnozrnnej ocele Kvalita ocele: S355J2+N/S355MC (medza klzu 355 MPa) S690QL/S700MC (medza klzu 690 MPa) Elektrická inštalácia: Elektrická inštalácia podľa noriem EÚ, osvetlenie 24 voltov Zásuvky 24N, 24S & 15-kolíková Nápravy a pneumatiky: BPW nápravy, vzduchovo odpružené, s kotúčovými brzdami (377 mm), s funkciou zdvíhania/spúšťania Samosmerovacie nápravy s elektro-magnetickou spätnou blokáciou, aktivovanou spiatočkou alebo manuálne Nápravové náradie Pneumatiky 435/50 R 19.5 Zahrnuté príslušenstvo: Na pozinkovanej prednej prípojnici žlto-červené vzduchové spojky 4 kusy klinov s držiakom 2" kónusový čap Pozinkovaná čelná stena z ocele, výška cca 1600 mm. EN12642-XL Biela reflexná páska podľa predpisov EÚ po bokoch, na výsuvu a vzadu červená Nakladacia plocha so silnou podlahou z tvrdého dreva 9 párov zásuvných vreciek na stĺpiky 100 x 50 mm vo vonkajšom ráme nakladacej plochy 1 držiak na rezervné koleso pod nakladacou plochou v smere jazdy vpravo Pozinkované výklopné podpery pod skosením nakladacej plochy Posuvné zavesovacie lišty na ALU nájazdové rampy na zadnej časti vozidla Európske reflexné tabule (červeno-žlté) na zadnej časti návesu Odstredivý záchyt na zadnej časti návesu Držiak na výstražné svetlo na zadnej časti návesu Na labutom krku a na zadnom nosníku naľavo a napravo držiak na výstražné tabule vrátane zásuvky HDPE náradový box 620x360x610 pod nakladacou plochou v smere jazdy naľavo 4 páry WADER kontajnerových vreciek v nakladacej ploche pre 1x 20ft-kontajner alebo 1x 40ft-kontajner, vo výsuve je pripravené ďalšie uzamknutie pre 45ft-kontajner 3 páry priečnych zásuvných líšt na stĺpiky 100 x 50 mm Zdvihacia náprava na prednej náprave s riadením cez TEBS E v závislosti na aktuálnom zaťažení náprav a aktuálnom stave naloženia Rýchlostná nálepka 80 km/h vzadu a na oboch stranách Štyri približne o 400 mm vysúvateľné výstražné tabule cca 423 x 423 mm s LED pozičnou lampou. Na výstražných tabuliach držiak pre výstražné svetlo Manometer na meranie záťaže na nápravy vrátane diagramu zaťaženia HRM metalizácia (High Resistance Metallisation) vonkajšieho rámu Kompletná oceľová konštrukcia guľôčkovo tryskaná, následne definované viditeľné plochy metalizované

Stav: nový, pohotovostná hmotnosť: 8 300 kg, maximálna hmotnosť nákladu: 36 700 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 1 080 mm, zavesenie: vzduch, veľkosť pneumatiky: 385/65 R 22.5, farba: sivý, Výbava: ABS, zdvíhacie čelo, Loading Platform: Extending loading platform design with pneumatically operated locking mechanism. Cut-outs in the outer frame of the loading platform for securing lashing straps. Landing Legs: JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity. Axles and Tyres: BPW air suspension axles with disc brakes (430 mm), equipped with lift/lower function. Trailing steering axle with electromagnetically activated reverse lockout, switchable via reverse gear or manually. Axle toolbox. Tyre size 385/65 R 22.5. Brake System: WABCO braking system compliant with EU regulations, fitted with EBS-E. Paintwork: Premium and durable corrosion protection of the standard shot-blasted welded frame by means of 2-component (2K) zinc dust primer. High-quality single-tone 2-component top coat in MB 7350 Novagrau. Rear section metallised and painted in RAL 9010. Metallic paint not possible. Steel Construction: Steel structure made from high-tensile fine-grain steels. Steel Grades: Dedpfxoikyh Hs Acpjuu S355J2+N/S355MC S690QL/S700MC Electrical System: Electrical installation according to EU regulations. Lighting: 24 Volt ASPÖCK-NORDIK. ASPÖCK-UNIBOX on the front connection strip with 24N, 24S, and 15-pin sockets. Connections in accordance with ISO standards. Accessories Included: Galvanised air coupling connectors (yellow-red) on the front connection strip. Galvanised steel front wall, approx. 1,600 mm high, EN12642-XL. 4 wheel chocks with bracket. White reflective tape according to EU regulations at the sides, extension, and red at the rear. European reflective boards at the rear of the trailer. Loading platform with approx. 30 mm thick hardwood floor, enclosed in Omega profiles. 10 pairs of stake pockets for 100 x 50 mm square stakes in the outer frame. 1 spare wheel holder below the loading platform, right side when facing the direction of travel. Manual and documentation. Bracket for rotating beacon at the rear of the trailer. On the gooseneck and on the rear apron, left and right, each with bracket for warning signs including socket. Anti-slip sand coating painted onto the central beam. 6 pairs of WADER container pockets in the loading platform for 1x 20ft container, 2x 20ft containers, or 1x 40ft container. For an extended 45ft container, an additional locking position is provided. 4 pairs of cross stake pocket rails, mounted transversely on the loading platform for 100 x 50 mm plug-in stakes. 1 galvanised bracket mounted transversely under the loading platform (2,390 x 720 x 400 mm). Access ladder mounted on the right side in the direction of travel. Lift axle on the front axle, controlled by TEBS E, depending on current axle load and loading status. Load gauge for axle load assessment, including load diagram. HRM metallisation of the outer frame: complete steel structure shot-blasted, followed by hot-finish metallisation of the defined visible surfaces with ZINACOR 850.

Stav: nový, pohotovostná hmotnosť: 10 000 kg, maximálna hmotnosť nákladu: 41 600 kg, celková hmotnosť: 51 600 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 540 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Výbava: ABS, Ložná plocha: - Labutí krk, délka cca 4 100 mm se středovým nosníkem - Ložná plocha ve výsuvném provedení, délka cca 9 500 mm se zkosením na zádi cca 350 mm x 10° a integrovanou závěsnou lištou pro nasazení volných ALU nájezdových ramp - Pneumatické zamykání s kuželovými uzamykacími čepy a zesílenými zajišťovacími pozicemi - Napájecí vedení je uloženo chráněně ve výsuvných nosnících a automaticky se přizpůsobuje aktuální délce ložné plochy Nápravy, odpružení a pneumatiky: - BPW nápravy a zavěšení, všechny nápravy hydromechanicky nuceně řízené - Montováno na otočné točně - Technické zatížení nápravy: 12 000 kg - Vzduchové odpružení se zdvihovým a spouštěcím ventilem - Pneumatiky 235/75 R17.5, dvoumontáž Lakování: - 6-ti komponentní povrchová úprava - Kompletní ocelová konstrukce po svařování otryskána - Jedna vrstva základního nátěru na bázi zinku, jedna vrstva adhezního primeru - Vrchní lakování dvěma vrstvami 2K akrylového laku v barvě MB 7350 Novagrau, poté utěsnění dutin speciálním voskem Ocelová konstrukce: - Ocelová konstrukce z vysoce pevných jemnozrnných ocelí - Kvalita oceli: - S355J2+N/S355MC (mez kluzu 355 MPa) - S690QL/S700MC (mez kluzu 690 MPa) - Svařeči certifikovaní dle DIN-EN 287-1 - Svařování metodou MAG dle EN ISO 4063, ochranný plyn M21 dle EN ISO 14175 Dujdpfxeiuy Nlj Acpsu Příslušenství: - Čelo z oceli, cca 1 600 mm vysoké - Kulatá NATO zásuvka na přední přípojnici - 3 kW elektrohydraulická jednotka pro ovládání hydraulických funkcí - 4 páry zapuštěných kotevních ok v vnějším rámu labutího krku - 4 páry kapes na sloupky v rámu labutího krku, pro sloupky cca 100x50 mm - 1 příčná lišta na kapsy na sloupky v ložné podlaze labutího krku, pro sloupky cca 100x50 mm (1x vzadu na labutím krku) - 2“ královský čep - Mechanické podpěry se dvourychlostní převodovkou a kličkou - JOST Modul B – statická zkušební zatížitelnost = 50 000 kg - Na labutím krku a ložné ploše cca 32 mm dřevěná podlaha, zapuštěná v ALU Omega profilech - Na výsuvu zajišťovací pozice cca každých 500 mm - 10 párů zapuštěných kotevních ok ležících ve vnějším rámu ložné plochy, vyklápěcí směrem ven - 6 párů kapes na sloupky ve vnějším rámu ložné plochy, pro sloupky cca 100x50 mm - 2 příčné lišty na kapsy na sloupky v ložné podlaze - Nerezový nářadlový box cca 1 250 x 500 x 550 mm - Zkosení na zadním příčníku vozidla cca 350 mm 10° - Integrovaná závěsná lišta pro volné alu nájezdové rampy na zadním příčníku - 1 pár opěrných trubek u zadního příčníku - Blatníky na všech nápravách - Centrální mazací zařízení s 1 čerpadlem - Dálkové řízení přední a zadní nápravy prostřednictvím kabelového dálkového ovladače pomocí tlačítka, s kontrolou sbíhavosti - Pod labutím krkem i vzadu na zadním příčníku vlevo a vpravo vždy jedna 7-pólová zásuvka na výstražné tabule - Jedna 7-pólová zásuvka na zadním příčníku - Příprava na přepravu kontejnerů „TWIST-LOCKS“ v ložné ploše pro přepravu 2x 20ft a 1x 40ft kontejnerů - Dálkové ovládání řízení navíc ke kabelovému dálkovému ovladači, se 2 kontrolkami na přijímači jako kontrola sbíhavosti - 2 manometry nápravové zátěže + diagram zátěže nápravy - 4 výstražné tabule cca 423 x 423 mm výsuvné o cca 400 mm - Standardní HRM metalizace (High Resistance Metallisation) vnějšího rámu - Kompletní ocelová konstrukce otryskána, poté definované viditelné plochy metalizovány žárově ZINACOR 850 (Zn 85% - Al 15%)

Stav: nový, maximálna hmotnosť nákladu: 36 020 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 540 mm, zavesenie: vzduch, veľkosť pneumatiky: 435/50 R 19.5, farba: sivý, Výbava: ABS, Loading Platform: - Loading platform with extendable design featuring pneumatically operated locking system - 2 pairs of lashing rings (LC 5,000 daN) - 1 pair of lashing rings (LC 10,000 daN) - 6 pairs of outward-folding lashing rings (LC 5,000 daN) - 2 pairs of outward-folding lashing rings (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for attaching tensioning straps Axles and Tyres: - BPW axles, air-suspended, with disc brakes (377 mm), equipped with lifting/lowering function - Self-steering axles with electromagnetic reverse lock, activated via reverse gear or manually - Axle tools - Tyres 435/50 R 19.5 Brake System: - Brake system in accordance with EU regulations with EBS-E (2S2M) Paintwork: - Premium, long-lasting corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer - High-quality single-tone 2-component (2K) topcoat in Novagrau - Rear section metallized and painted in RAL 9010 (Pure White) - Metallic paint finish not possible Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Steel Construction: - Steel construction made from high-tensile fine-grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical System: - Electrical system compliant with EU regulations, lighting 24 Volt ASPÖCK-NORDICK (ASS3) - ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets - Connection as per ISO - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Included Accessories: - Yellow-red air couplings on the galvanized front connection bar - 2 wheel chocks with holder - 2" kingpin - A galvanized steel front wall, approx. 1,600 mm high Dedpfoi Dwlwsx Acpjuu - Yellow reflector tape in accordance with EU regulations on the sides, extension section, and rear of the trailer - European reflector plates (Red-Yellow) at the rear of the trailer - Loading platform with approx. 38 mm thick hardwood flooring - 10 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the platform - 1 spare wheel holder under the loading platform on the right-hand side in the direction of travel - Manual and description on USB stick - 1 mudflap at the rear of the trailer - 1 bracket for a beacon at the rear of the trailer - On the gooseneck and the rear plate, left and right, each with bracket for warning signs including socket - 1 INOX toolbox mounted crosswise under the platform (1,000 x 400 x 2,500mm) - 6 pairs of WADER container pockets in the platform, for 1x 20ft container, 2x 20ft containers or 1x 40ft container; an additional locking point is provided in the extension section for a 45ft container - 3 pairs of stake pocket strips, mounted transversely in the platform, for plug-in stakes 100 x 50 mm - 60 km/h speed sticker at the rear - 2 reversing spotlights mounted on the rear plate - Four warning signs extendable by approx. 400 mm (approx. 423 x 423 mm) each with a position lamp - Bracket for beacon on the warning signs - HRM metallization (High Resistance Metallization) of the outer frame - Complete steel construction shot-blasted, then all defined visible surfaces metallized and hot-finished with ZINACOR 850 (85% zinc – 15% aluminium)

Stav: nový, Rok výroby: 2025, prevádzkové hodiny: 2 h, G1200 TELE GIANT čelný nakladač G1200 TELE v štandardnej výbave, navyše s: Zadný rám GIANT COMPACT upínač náradia (hydraulické uzamykanie) ROPS/FOPS ochranná strecha pre obsluhu 1x pracovné svetlo (LED) vpredu na ochrannej streche 1x pracovné svetlo (LED) vzadu na ochrannej streche 1x hydraulický okruh (dvojčinný), ovládaný mechanicky Vysúvanie a zasúvanie teleskopického výložníka, elektricky ovládané (pomocou 2 tlačidiel na joysticku) Trvalý režim pre dodatočnú funkciu, jednostranne 1 pracovné svetlo (LED) vpredu, na výložníku Dusdpfx Ajy E Apxscpeu Zadná záťažová platňa (70 kg) Ťažné oko na manévrovanie GIANT žltá / GIANT šedá / čierna Pneumatiky: 23x8.50-12 SKID Bez prevádzky na cestách

Stav: použitý, najazdené kilometre: 263 277 km, výkon: 235 kW (319,51 k), prvá registrácia: 09/2008, typ paliva: nafta, konfigurácia náprav: 6x4, palivo: nafta, kapacita palivovej nádrže: 400 l, farba: modrá, typ prevodu: mechanický, emisná trieda: Euro 5, Rok výroby: 2008, Výbava: ABS, EBS (Elektronický brzdový systém), klimatizácia, prípojné zariadenie, systém kontroly trakcie, = Ďalšie možnosti a príslušenstvo = - Ovládanie klimatizácie = Ďalšie informácie = Počet valcov: 6 Objem motora: 10.520 cc Hrubá hmotnosť: 26.000 kg CELKOVÁ HMOTNOSŤ: 26.000 kg Duodpoxt T Ixofx Acpsu Predajná cena: € 2.999, US$ 3.461

Stav: použitý, pohotovostná hmotnosť: 10 900 kg, maximálna hmotnosť nákladu: 43 600 kg, celková hmotnosť: 54 500 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 04/2025, dĺžka ložného priestoru: 8 700 mm, šírka ložného priestoru: 2 550 mm, výška ložného priestoru: 855 mm, veľkosť pneumatiky: 245/70 r17.5, farba: sivý, Rok výroby: 2025, prevádzková hmotnosť: 10 900 kg, Výbava: ABS, Gooseneck, rigid, in central tube design: - Enclosed outer frame with cutouts for lashing straps (LC 1,500 daN) - Steel flooring with anti-slip coating - Including perforated rail for aluminum approach ramps - 2" king pin - Mechanically operated BPW landing gear - 550 mm long, 8° bevel at the rear end of the gooseneck - Front bulkhead including stowage position for rear wall, 400 mm high - Spare wheel holder mounted upright at the front of the gooseneck - 3 pairs of recessed lashing rings LC 5,000 daN on the gooseneck deck - Aluminum drop-in sideboards, 400 mm high, consisting of 2x sideboards (length 3,150 mm) and rear board with stanchions (galvanized) - Rectangular storage box, aluminum, with folding lid and lockable, approx. 400 x 800 mm, centrally mounted - Storage box 45’, aluminum, with folding lid and lockable, approx. 400 x 800 mm, left side - Storage box 45’, aluminum, with folding lid and lockable, approx. 400 x 800 mm, right side Load platform, single telescoping: - Enclosed outer frame with cutouts for lashing straps (LC 1,500 daN) - Fixed section at front 700 mm - Steel tread plate with anti-slip coating - Beveled transition between fixed section and load platform for attaching bridging rails and wheel recesses - Excavator recess including elongated holes for load securing (LC 1,500 daN), approx. 3,850 mm long - Prepared for hydraulic ramp (electric supply fitted) - Beams for extension to 3,000 mm width - Beveled vehicle rear, 8°, 550 mm long - Sled-type design for easy mounting and removal of ramps - Continuous rear mudflap - 1 pair of lashing points LC 10,000 daN centrally on the platform behind the gooseneck - 7 pairs of lashing points LC 10,000 daN on outer frame of the platform - 6 pairs of stake pockets 100 x 50 mm on the outer frame of the platform - 1 pair of lashing points LC 10,000 daN centrally at the rear of the platform - 1 pair of stake pocket rails approx. in the middle of the platform - 1 pair of stake pocket rails on the fixed section - 1 pair of stake pocket rails behind the last axle Ramps: - Hydraulic twin-fold ramps, 2,750+1,500x800 mm - Larch timber decking - Operated via remote control (either wired or wireless) - Ramps with quick-change (removal system) Chassis: - BPW ECO Max axle make - 2 ride heights - 4 axles, each 10 t (technically 12 t) - Twin tires 245/70 R17.5 - 2 rigid axles and 2 friction-steered axles - Reverse steering lock for friction-steered axles via reverse gear - Brake system make Knorr (in accordance with EU directives with EBS-E) - TIM G2 by Knorr (Trailer Information Module) - RSS (Roll Stability Support) - Load-dependent lift axle on the first axle including starting aid (forced lowering of lift axle via TIM possible) Accessories: - 4 wheel chocks with holder - 2 pairs of warning boards 423 mm x 423 mm, with 2 marker lights and mounting position for beacon, continuously adjustable up to 3,950 mm - Mounting options on gooseneck and platform (alternatively on ramp, if present) are included Dodpfx Acsi Ai E Rjpeuu - Insertable bulkhead at the end of the excavator recess - Electro-hydraulic unit for ramp operation - Wireless remote control for ramp operation - Hydraulic stabilizer legs at vehicle rear for support during loading - 1 pair of additional reversing lights at the rear, activated with reverse gear - Larch wood extension beams (option)

Stav: nový, pohotovostná hmotnosť: 9 300 kg, maximálna hmotnosť nákladu: 30 100 kg, celková hmotnosť: 39 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 8 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R17.5, Výbava: ABS, Gooseneck: - Gooseneck with rear bevel of approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Extendable loading platform: - Loading platform in extendable design with rear bevel of approx. 1,000 mm x 8° - 5 pairs of foldable external lashing rings (LC 5,000 daN) - 3 pairs of foldable external lashing rings (LC 10,000 daN) - 1 pair of flat lashing rings at the front of the loading platform (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, checker plate covering over the axles Landing legs: Djdpfx Ajyxc Eyocpjuu - JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and tyres: - BPW axles, hydro-mechanically forced-steered - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Axle tools - TPMS tyre pressure monitoring system according to ECE R 141 - Tyres 235/75 R17.5 3PMSF Accessories included: - 2" king pin - One galvanised steel front bulkhead, approx. 400 mm high - Yellow-red air couplings on galvanised supply line at the front - 2 wheel chocks with holder at the front bulkhead - One spare wheel with holder in front of the front bulkhead - Electro-hydraulic power unit - Steering override, operated from front and rear via cable remote control with push buttons, with single-track axle control - European reflector boards (red-yellow) at the rear of the trailer - White reflective tape according to EU regulations on the sides and on the extension, red at the rear - On the gooseneck and at the rear, left and right, each a bracket for warning signs, including socket - Sliding bracket for aluminium approach ramps at the rear of the vehicle - Bracket for a rotating beacon at the rear of the trailer - Galvanised folding supports beneath the rear bevel of the loading platform - One mud flap at the rear of the trailer - Manual and documentation on USB stick - BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and removable protection for the pump - On the gooseneck, plug-in aluminium side and rear walls approx. 2,440 x 400 mm - The rear galvanised plug-in stanchions are removable (body length: approx. 2,560 mm) - 3 pairs of WADER container pockets in the loading platform for 1x 20ft, 1x 30ft or 1x 40ft container - 6 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the loading platform - INOX toolbox 1,500 x 390 x 810 under the loading platform on the right (in direction of travel) - Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm with a position light - Bracket for rotating beacon mounted on the warning signs - Radio remote control for steering override, in addition to cable remote control, with indicator lights on the receiver for single-track control - Anti-slip sand coating painted onto the checker plates on the gooseneck and on the loading platform - 80 km/h speed stickers at the rear and both sides - Load gauge to determine axle loads, including load diagram

Stav: použitý, pohotovostná hmotnosť: 8 900 kg, maximálna hmotnosť nákladu: 40 100 kg, celková hmotnosť: 49 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 09/2025, dĺžka ložného priestoru: 9 200 mm, šírka ložného priestoru: 2 550 mm, zavesenie: vzduch, veľkosť pneumatiky: 245/70 R 17,5, farba: sivý, Rok výroby: 2025, Výbava: ABS, For every used semi-trailer, you receive a current and comprehensive inspection and functionality report. Chassis: Dusdsywv Ixspfx Acpeu - Robust welded steel frame construction with a front frame offset and level loading platform with rear taper approx. 500x100 mm - 200 mm gooseneck with chamfered front corners - Sloped end of the gooseneck approx. 500 x 100 mm (grip steps on the outer frame in the rear taper area) - 2 king pin positions with replaceable 2" king pin - Closed external frame as perforated outer frame - Loading platform with extendable central frame, extendable by approx. 2,000 mm lockable every 500 mm pneumatically - Frame stepped 80x80mm before and after division - Reinforced frame design / point load in retracted state at center of gravity - Without extendable widening sections but prepped for later installation (= guide tubes welded into frame) - With excavator trough (uncovered), depth approx. 220 mm, width approx. 600 mm, starting after 2nd axle to vehicle end - 1 pair wheel recesses between 1st and 2nd axle with steel covers (covers with Körapur coating), depth approx. 400 mm - Rear underride guard = extended rear plate - Drop landing legs at the rear Floor: - 35 mm larch wood floor with aluminum omega profiles Axles, Steering, and Tires: - BPW air suspension axles, each 10 t axle load, airbag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lifting and lowering device with total lift approx. 200 mm - 2nd driving position via ball valve +50mm - 1st axle as lift axle (wired via EBS), full automatic confirmation with manual emergency actuation via button on the trailer - 3rd axle as friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, centrally positioned offset - 12 tires 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring system Equipment: - Removable side and rear boards on the gooseneck approx. 400 mm high - Spare wheel holder - Lateral aluminum side underrun protection - 4 wheel chocks with holders - Long license plate holder in rear plate - 1 ECE board insertable at rear - 11 pairs ZK modules 10t side: - 2x on the gooseneck - 2x on the loading platform before the extension - 7x after the extension - No rear towing eyes - Extendable warning signs including 3 position lights each, front at landing gear and rear before tail plate, steplessly extendable up to load width 4,500 mm - 4 holders for warning signs insertable in stanchion pockets on the loading platform - 6 pairs of side stanchion pockets for 100x50 mm plug-in stanchions - 2 cross rows of stanchion pockets for 100x50 mm stanchions on the gooseneck from outer to main frame (1x before and 1x after king pin positions) - 3 cross rows of stanchion pockets for 100x50 mm stanchions on the loading area from outer to main frame (1x before extension, 1x after extension, 1x after 3rd axle) - 2 pairs of steel plates in loading area for container locks to accommodate 1x 20ft container - Rubber apron mounted on underride guard - Pre-installed (NATO cable routing, hole pattern for subsequent installation of NATO socket at front of rear plate, and holder on the vehicle) for retrofitting an electrohydraulic unit right rear for possible control of loading ramps Optional: The trailer can be delivered with aluminum loading ramps.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, pohotovostná hmotnosť: 15 900 kg, maximálna hmotnosť nákladu: 42 100 kg, celková hmotnosť: 58 000 kg, konfigurácia náprav: 3 nápravy, povolené zaťaženie nápravy (náprava 1): 10 000 kg, dovolené zaťaženie nápravy (náprava 2): 10 000 kg, povolené zaťaženie nápravy (náprava 3): 10 000 kg, prvá registrácia: 11/2001, dĺžka ložného priestoru: 8 960 mm, šírka ložného priestoru: 2 520 mm, celková dĺžka: 12 950 mm, celková šírka: 2 520 mm, celková výška: 3 800 mm, zavesenie: hydraulika, veľkosť pneumatiky: 245/70R17,5, rázvor náprav: 1 360 mm, maximálna rýchlosť: 90 km/h, farba: modrá, brzda prívesu: príves s brzdou, Rok výroby: 2001, Výbava: ABS, Nooteboom MCO-73-04V TOP trailer from first owner, first registration 21.11.2001, Overhauled in 2014, Brakes NEW as of 12/2025! 66,000 kg gross train weight with 3-axle tractor unit, Gross weight 58,000 kg, Kingpin load 18,000 kg, axles 1–4: 10,000/10,000/10,000/10,000 kg Unladen weight 15,900 kg, For exact dimensions, please refer to the technical data sheet. Lowbed 8.96 m + 5.50 m extension (telescopic), Hydraulic supports at front and rear allow the entire trailer plus 30 t load to be lifted easily; ideal for side unloading from loading ramps, Hydraulic suspension (also enables leveling for uneven load distribution), 1st axle liftable, 4 steerable axles, either automatic or remote-controlled as desired (including counter-steer), Hydraulic ramps + hydraulically extendable to 3,000 mm, Loading platform extendable to 3,000 mm, Tyres 245/70R17.5 1A=6/6/6/6 mm, 2A=11/11/8/8 mm, 3A=9/9/7/7 mm, 4A=11/11/7/5 mm, spare wheel 6 mm, Further details on request. Sale only to businesses or for export. Leasing / Financing available on request – instant processing, even without down-payment! More information and conditions on request. The vehicle description serves solely for general identification of the vehicle. Information, images, and descriptions are provided without guarantee! Equipment must be checked separately if necessary. The seller accepts no liability for possible typographical or data transmission errors. Subject to error and prior sale. Dedpfxeyqm I Uj Acpsuu Thank you for your interest! We look forward to your visit. OUR SERVICE We are happy to take your used equipment in part-exchange, 30-day export license plate incl. insurance, EUR-1 + all customs documents for export, TÜV / technical inspection / accident prevention test / tachograph check / OBU installation, Professional delivery to customer, Airport Stuttgart / Sindelfingen train station pick-up by arrangement, Retrofitting of additional accessories as well as other individual customer requests possible upon consultation.

Stav: nový, číslo stroja/vozidla: df15479123e15bcf265d560e1, pohotovostná hmotnosť: 12 800 kg, maximálna hmotnosť nákladu: 44 200 kg, celková hmotnosť: 57 000 kg, konfigurácia náprav: 3 nápravy, veľkosť pneumatiky: 235 / 75 r 17,5, Further information Chassis low-bed semi-trailer Steel welded construction, fifth wheel plate with replaceable 2 king pins and 2 king pin positions 24t, 2-speed landing gear, single-sided operation, with straight base, without compensator Foldable rear support 2 wheel chocks with holders Side underrun protection in aluminium 1 plastic toolbox with shelf, width=620/height=360/depth=440 mm, lockable with padlock (lock not included) Extendable widenings to 3,000 mm (not in rear slope); track width of machines or vehicles to be transported must not exceed external frame width of 2,550 mm Storage compartment for timber planks on gooseneck, transversal at the front 70 mm timber planks for extensions up to 3,000 mm Telescoping Central tube frame with cleanly welded, nested telescopic frame elements telescopic by max. 6,000 mm and lockable approx. every 1,000 mm. Payload/point load is reduced when extended! Locking with mechanical bolt locking With sliding table Tie-down points low-loader 2 pairs of ring lashing eyes, each 5t, at the front on gooseneck; 11 pairs of mushroom lashing points, recessed in the top and side of the outer frame, each 10t (2x on gooseneck, 9x on low-bed area), first tie-down point 250 mm from the front and last max. 250 mm from the rear, spacing of lashing points no greater than 1,100 mm 8 pairs of stake pockets recessed in outer frame, internal dimensions 70 x 40 mm (convertible to 5t ring lashing eyes, not included) 3 pairs of folding lashing eyes additionally recessed into low-bed area, each 10t (1x at start of low deck, 1x in front of 1st axle, 1x behind 3rd axle) Axles + Suspension SAF drum brake axles Axles/chassis laser measured to reduce tyre wear and fuel consumption Last 2 axles steering, with automatic reverse lock via reversing light and manual locking function via hand button on the vehicle Air suspension with raise & lower valve Wheels and tyres 235/75 R 17.5 Fulda brand Steel rims in twin arrangement, factory silver Braking system 2-line compressed air braking system Spring-loaded parking brake Vehicle stability control system Axle load detection via EBS-CAN bus signal, for display in the driver's cab, truck must be prepared accordingly, no installation on truck (not a calibrated scale) 2 polarity-safe coupling heads at front, without connecting pipe EBS, electronic brake system with EBS socket at front, without connecting cable Note: The trailer may only be towed by tractor units which ensure the effectiveness of the ABS! Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at front 2 white/red marker lamps at rear 1 LED revolving beacon with holder, switched via parking light (lamp removable) Duedpfxei Ri Hno Acpou 2 pairs of warning plates, double LED-illuminated and extendable to 3,000 mm 2 x 7-pin polarity-safe sockets at front, without connecting cable Floor Gooseneck with steel / chequer plate covering Storage box recessed in gooseneck slope Then with 70 mm softwood floor, in wheel arch area steel / chequer plate covering Rear slope with 70 mm softwood floor Side walls 25 mm aluminium hollow section, 400 mm high, front and sides on gooseneck, plug-in Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable Covered with timber Hydraulically operated via tractor auxiliary drive with throttle Hydraulic connection with SVK coupling NW 10/3, without connection hoses Operating Notes An exemption permit is required for axle loads of 10,000 kg

Stav: nový, maximálna hmotnosť nákladu: 34 600 kg, celková hmotnosť: 49 000 kg, konfigurácia náprav: 2 nápravy, Rok výroby: 2025, EuroCompact FL 02 Nízky náves s dvojitým teleskopom a kyvadlovými nápravami Hmotnosti Rýchlosť 80 km/h Sedadlové zaťaženie 25 000 kg Zaťaženie náprav 2 x 12 000 kg Povolená celková hmotnosť 49 000 kg Vlastná hmotnosť cca 14 400 kg Užitočné zaťaženie 34 600 kg Labutí krk Dĺžka x šírka 3 700 mm x 2 480 mm Výška sedla (naložené) 1 300 mm Polomer otáčania vpredu / vzadu 1 350 mm / 2 250 mm Královský čap, sedadlové zaťaženie 25 000 kg Nízky náves 2x dvojito teleskopický Dĺžka x šírka 6 620 mm + 5 050 mm + 5 330 mm x 2 550 mm rozšíriteľný na 3 000 mm teleskopicky roztiahnuteľný o 5 050 mm + 5 330 mm na 17 000 mm v lôžku Stavebná výška 260 mm Nakladacia výška naložené cca 360 mm pri svetlej výške 100 mm Podvozok zadný 2-nápravový Rázvor 1 360 mm Jednotlivé pneumatiky 245/70 R 17,5 s kyvadlovými nápravami Gigant 12-14 t zaťaženie na nápravu Riadenie nútené Vanička na rýpadlo vzadu v podvozku Duodpfx Ajx Nupxjcpsu Dĺžka podvozku 2 700 mm Rádiové diaľkové ovládanie všetkých funkcií Centrálne mazanie Elektroagregát Najazdové kliny Uchyty na kontajner v nízkom ráme Rozširovania

Stav: nový, konfigurácia náprav: 2 nápravy, Rok výroby: 2021, Výbava: ABS, Technical Data for EBERT TLS 43 ATV Special Low Loader: Permissible fifth-wheel load: 19,000 kg Permissible axle load: 24,000 kg Permissible total weight: 43,000 kg Unladen weight according to DIN approx.: 12,500 kg Lower deck length i.L.: approx. 6,650 mm + 4,000 mm Axle table length: 2,700 mm External width: 2,550 mm Loading edge/lower deck: approx. 200 mm / 350 mm Sliding table length: 500 mm Lower deck widening to: 3,050 mm Lower deck extendable by: 4,000 mm B-dimension: 12,000 mm Entire vehicle flame-sprayed galvanized, with epoxy primer and 2K paint finish Oversize signage at front and rear with red/white panels Wheels: 9x Michelin 245 / 70 R 17.5 X MULTI T VB 143J/146F Steering: TRIDEC DLS with Tritronic Axles: 12,000 kg – DLS single wheel suspension, hydraulically steered and hydraulically suspended Front raised deck: - Corner doors left and right, accessible from outside - Storage box with lid behind front wall, height 600 mm, width 2,480 mm, depth 7,500 mm - Spare wheel on the raised deck, behind the partition on the right - Staircase on the right side for access from the lower deck to the front raised deck - Hydraulic coupling for uncoupling on left side, 6-way Multi-Faster coupling - 6 lashing points, 3,000 kg rated on outside of the raised deck (fold-down lashing eyes) - 2 lashing points, 5,000 kg rated on top of the longitudinal members (rearward) Lower deck: - Climbing aids at the extension - Lower deck telescopic by 4,000 mm, lockable every 500 mm - With sliding table, lockable every 250 mm - 28 lashing points, 10,000 kg rated on the outer frame - 24 stake pockets 90x90 mm, evenly distributed for the lower deck widening to 3,050 mm - Hard wood planks 50 mm laid between extension tubes, 10 mm overlap Rear raised deck: - Front raised deck slanted and perforated, for retrofitting ramps, zinc-coated adapters - Rear ramp mounting profiles (Altec) – C rails - 6 lashing points, 10,000 kg rated on outside of the raised deck - 6 lashing points, 5,000 kg rated in the excavator trough - 8 lashing points, 5,000 kg rated for oversized width on the outer frame - Excavator trough front and rear closed with wooden floor board (insertable) Electrics: - Use NATO spiral cable, power supplied from tractor unit - Central revolving beacon at rear - LED side marker lights - Standard vertical mounted tail light (LC5) - Work lights on raised deck for illuminating lower deck - Uncoupling: Sensor for safety and pressure switch for suspension Air system: - Aluminium air tanks 60l (2x 10l, 2x 20l) - TEBS modulator - Extension locking left and right (valve lateral in rear raised deck) - Double release valve Hydraulics: - Hydraulic system on raised deck for steering, suspension, and quick release gooseneck Accessories: Duodjyfvwbspfx Acpju - 2 sets of 4 hardwood planks for deck widening and interdeck table - 2 chocks for uncoupling - 4 wheel chocks Upon request, we can provide a leasing or financing offer from Mercedes-Benz Bank. Mr. Ebert (phone) is available for consultation. Further information can be found on our homepage. Subject to errors and prior sale! New roadworthiness inspection (HU), rental possible Gross vehicle weight: 43,000 kg Please contact Tobias Ebert for further information.

Stav: nový, konfigurácia náprav: 3 nápravy, Rok výroby: 2022, Výbava: ABS, Technical Data for EBERT TLS 43 ATV Special Low Loader: Permissible fifth wheel load: 19,000 kg Permissible axle load: 36,000 kg Gross vehicle weight: 55,000 kg Unladen weight (DIN): approx. 15,500 kg Low-bed length (internal): approx. 6,650 mm + 4,000 mm Axle table length: 3,550 mm Duedpeyfu N Ajfx Acpju External width: 2,550 mm Loading edge/low-bed: approx. 200 mm – 350 mm Sliding table length: 500 mm Low-bed width extension: up to 3,050 mm Low-bed telescopic extension: 4,000 mm B measurement: 13,300 mm Complete vehicle flame-sprayed galvanised, with epoxy primer and 2K paint finish Oversize warning signs front and rear with red/white boards Wheels: 13 x Michelin 245 / 70 R 17.5 X MULTI T VB 143J/146F Steering: TRIDEC DLS with Tritronic Axles: 12,000 kg – DLS independent wheel suspension, hydraulically steered and suspended Front raised deck: 600 mm high dropsides Front corners of raised deck angled Lockable box with lid behind front wall (H: 600 mm, W: 2,480 mm, D: 750 mm) Access doors left and right in the front corners Spare wheel on raised deck, behind partition wall on driver's side Staircase on right side to access front raised deck from the low-bed Hydraulic coupling for decoupling on left side (6-way Multi-Faster coupling) 6 lashing points, 3,000 kg capacity, on outer raised deck (recessed lashing rings) 2 lashing points, 5,000 kg capacity, on top of longitudinal beams (rear) Low-bed: Climbing aids on telescopic extension Outer frame thickness: 8 mm Low-bed telescopically extendable by 4,000 mm, lockable every 500 mm With sliding table, lockable every 250 mm 28 lashing points, 10,000 kg capacity, on outer frame 24 stake pockets (90 x 90 mm), evenly distributed for widening low-bed to 3,050 mm 50 mm hardwood planks laid between extension tubes, 10 mm overlap Rear raised deck: Raised deck inclined and perforated at the front for retrofitting ramp holding profiles (with galvanized adapters) Ramp holding profiles (Altec) – C rails at rear 8 lashing points, 10,000 kg capacity, on outer raised deck 6 lashing points, 5,000 kg capacity, in excavator trough 10 lashing points, 5,000 kg capacity, for oversize loads, outer frame Excavator trough closed front and rear with removable wooden floor panel Electrics: NATO spiral cable; power supplied by tractor unit Rotating beacon centrally mounted at rear Side marker lamps as LED version Standard upright mounted rear lights (LC5) Worklight on raised deck to illuminate low-bed Oversize warning system front and rear for detaching operation control; sensor for securing, pressure switch for suspension Air: Aluminium air reservoir, 80 l TEBS modulator Extension lock left and right (valve on side at rear raised deck) Double release valve Hydraulics: Hydraulic system mounted on raised deck for steering, suspension, and detachable gooseneck Accessories: 2 x 4 hardwood planks for low-bed width extension and intermediate table 2 wheel chocks for decoupling 4 parking chocks We are happy to provide a leasing or financing offer on request. Mr. Ebert (Tel.) will gladly assist you. Further information available on our website. Errors and prior sale excepted.

Stav: použitý, Rok výroby: 2016,