Náves s nízkym nakladacím zariadením

Meusburger 3-Achs-Tele-Semi 1P. Radmul.-Federhebew.

Chassis:
- Robust steel frame welded construction with front frame cranking and flat platform deck, rear bevel approx. 500x100 mm
- Gooseneck: 200 mm with beveled front corners
- Beveled end gooseneck, approx. 500 x 100 mm (anti-slip ribs on outer frame in rear bevel area)
- 2 king pin positions with interchangeable 2" king pin
- Outer frame fully enclosed as slotted outer frame
- Deck with pull-out central frame, extendable by approx. 2,000 mm, lockable pneumatically every 500 mm
- Frame before and after split with 80x80 mm step
- Reinforced frame design / point load in retracted state at center of gravity
- With excavator trough (without cover), approx. 220 mm deep, 600 mm wide, starting approx. after 2nd axle up to end of vehicle
- 1 pair wheel recesses between 1st and 2nd axle with steel covers (Körapur coated), depth approx. 400 mm
- Underrun protection = extended rear panel
- Drop legs at rear

Ramps:
- 2 one-piece aluminum loading ramps, special design with spring lifting mechanism
- Length x width approx. 2,500 mm x 600 mm
- Secured in transport position with lashing straps
- Manually laterally adjustable

Axles, steering and tires:
- BPW air suspension axles, 10 t axle load each, airbag diameter 360 mm
- S-cam brakes 300/200 mm, asbestos-free brake linings
- Automatic slack adjuster
- Raise/lower device with total stroke approx. 200 mm
- 2nd driving position via ball valve +50mm
- 1st axle: lift axle (wired via EBS), automatic confirmation, mechanical emergency control via push button on trailer
- 3rd axle as friction steered trailing axle with electric and mechanical lock
- 12 steel disc wheels, 10-hole, center offset
- 12 tires 245/70 R 17.5 143/141J tubeless
- Including tire pressure monitoring
Hfjdpfx Aaoxnym Dsbjn

Floor:
- 35 mm larch wooden floor with aluminum omega profiles

Landing gear:
- Mechanical 24 t landing legs, single-side operation and equalizing linkage

Paintwork:
- Steel shot blasting, spray galvanizing of chassis and priming
- Painting chassis/hub/outside frame in DB 7350 Novagrau
- Reflective strips on sides and rear, yellow

Accessories:
- Removable side and rear boards on gooseneck approx. 400 mm high
- Spare wheel holder
- Side aluminum impact protection
- 4 wheel chocks with holder
- Elongated license plate holder at rear panel
- 1 plug-in ECE marker board at rear
- 11 pairs ZK modules 10t lateral:
- 2x on gooseneck
- 2x on platform in front of extension
- 7x after extension
- Extendable warning boards including 3 position lamps each, at the front near landing legs and rear before end plate, infinitely extendable up to 4,500 mm deck width
- 4 plug-in fixtures for warning boards in stake pockets on deck
- 6 pairs stake pockets at side for stakes 100x50 mm
- 2 rows of cross stake pockets for stakes 100x50 mm on gooseneck from outer frame inward up to main frame (1x before and 1x after king pin positions)
- 3 rows of cross stake pockets for stakes 100x50 mm on deck from outer frame inward to main frame (1x before extension, 1x after extension, 1x after 3rd axle)
- 2 pairs of steel plates in platform for container locks to accommodate 1x 20ft container
- Rubber apron mounted on underrun protection

Inzercia bola automaticky preložená a vyskytli sa nejaké chyby prekladu.