Faymonville Stz-4Aux kúpiť použité (247)

Stav: nový, pohotovostná hmotnosť: 29 600 kg, maximálna hmotnosť nákladu: 72 400 kg, celková hmotnosť: 102 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 6 650 mm, šírka ložného priestoru: 2 840 mm, výška ložného priestoru: 550 mm, veľkosť pneumatiky: 285/70 R19.5, farba: sivý, prevádzková hmotnosť: 29 600 kg, Výbava: ABS, Gooseneck: - Hydraulically liftable/lowerable and detachable gooseneck - Length approx. 3,650 mm - For tractor units: 6 x 4 or 8 x 4 2-Axle Front Bogie: - Hook couplings front and rear - Chassis length x width approx. 2,200 mm x 2,850 mm Excavator Deck “BB-A”: - Telescopic excavator deck “BB-A” with drive-over deck hooks at the front and pin & lug coupling at the rear - Length x base width approx. 6,650 mm x 2,850 mm - Beam height x beam width approx. 400 mm x 1,350 mm - Loading height 550 mm with 150 mm ground clearance 4-Axle Rear Bogie: - Mechanical pin & lug coupling at the front for attaching a lowbed, end cross-member at the rear - Chassis length x width approx. 5,480 mm x 2,850 mm - Extensive lashing positions Pendulum Axle and Tyres (front and rear chassis): - “PENDULUM AXLE”, all axles hydro-mechanically forced steered - Burst protection valve on axle compensation cylinder with automatic reset function - Hydraulic cylinders with shut-off valves and locking pins to secure in lifted position - Final axle coating with 2 coats of 2K paint, single colour in MB 7350 Novagrau - Technical axle load: 12,000 kg - Hydraulic axle balancing - Tyres: 285/70 R19.5 Follow Steering: - Remote steering from front and rear via cable remote control with push buttons, including single-track steering monitoring - Socket on gooseneck for steering control - Cable remote with push buttons and single-track control included Accessories included: - Galvanised connection bar at the front with yellow/red air couplings - Steel front wall approx. 400 mm high - 4 wheel chocks Lajdpfxowcmhaj Af Tja - 3.5" king pin - One 7-pin socket left and right at the rear of the gooseneck for warning panel - A-frame with winch for spare wheel at front end of gooseneck - Truck hydraulic connection with flow regulator (40 l/min), including bracket for supply line suspension; tractor fuel tank must be at least 80 litres, incl. couplers - Detachable ALU side walls and rear board on gooseneck, approx. 400 mm high, anodised - Control lever on gooseneck protected by a foldable cover - Separate air connection with blow gun on gooseneck - BEKAMAX central lubrication system, 1x on gooseneck, 1x on 2-axle bogie, 1x on 4-axle bogie - Variomax tool kit - Multi-coupler hydraulic connections on gooseneck and at lowbed hook bracket - 2 spare wheels - One 7-pin socket left and right, front and rear on rear chassis for warning panel - Front chassis with separate air connection for pneumatic screwdriver - Folding widening extenders with steel panels, width adjustable from approx. 2,850 mm to 3,250 mm - Steel panels can be positioned in two places to create a lowered loading platform - Steel panels with approx. 12 mm rubber floor covering - Threaded bushings (⌀ 40 mm) spaced approx. every 500 mm on the outer flange of the excavator deck for lashing rings - One locking position approx. every 500 mm on the extension with mechanical locking - Socket on rear chassis for cable remote control steering - 2 reversing lights on rear panel - Four warning panels, extendable by approx. 2,000 mm each, approx. 423 x 423 mm, with position light - 1 work lamp left + right on rear panel of gooseneck, separately switchable - Two INOX toolboxes, approx. 855 x 340 x 390 mm - 1-cylinder Hatz diesel engine (Silent Pack) - Radio remote control for follow steering

Stav: nový, pohotovostná hmotnosť: 10 300 kg, maximálna hmotnosť nákladu: 39 200 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17.5, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading Platform: - Loading platform hydraulically liftable and lowerable after the gooseneck, length approx. 2,800 mm, with rear bevel approx. 1,000 mm x 8° - Cut-outs in the outer frame for lashing straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, checker plate flooring above the axles Two-part Steel Ramps: - One pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering - Ramps with hydraulically folding and unfolding ramp sections, hydraulic lifting mechanism, and hydraulically adjustable - Maximum load per pair: 40,000 kg Axles, Suspension & Tires: - BPW axles and suspension, 2 rigid axles, 1 trailing steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lower valve - Axle tools Ledpfju Hp Hrex Af Teaa - Tyres 235/75 R 17.5 3PMSF - TPMS tire pressure monitoring system according to ECE R 141 Included Accessories: - One spare wheel with holder in front of front wall - 2" kingpin - Galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on galvanized front connector rail - 4 wheel chocks - Galvanized folding supports under the rear slope of the loading platform - Bracket for beacon at the rear of the trailer - Cover plates for bridging the gap between ramps and platform - White reflective tape according to EU regulations on the trailer sides, and red at the rear - Electro-hydraulic unit at the rear under the loading platform - On the gooseneck and ramps left and right, each a bracket for warning signs, incl. socket - Control valves for ramps fitted on the right side of the trailer - European reflective plates (red-yellow) at the rear of the trailer - Manual and description on USB stick - On the gooseneck, plug-in ALU side walls and rear wall approx. 2,440 x 400 mm - Rear galvanized stake pockets are removable (body length approx. 2,560 mm) - An electric winch with radio remote control, approx. 5,400 kg lifting force, incl. 9.5 mm steel cable, 24 m long, with cable guide roller - Bolted 5t ring for rope winch cable diversion on the neck without guide pulley - 2 pairs of WADER container pockets in the platform for a 20ft container - 6 pairs of stake pockets (100 x 50 mm) in the outer frame of the loading platform - Lift axle on front axle, controlled by TEBS E, depending on current axle load and loading condition - 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN) - 1 pair of recessed lashing rings at the rear bevel along the central beam (LC 10,000 daN) - Non-slip sand coating applied on the checker plates on the gooseneck and platform - Central lubrication system BEKAMAX (Pico) with general-purpose grease NLGI-2 and removable pump guard - Four extendable warning signs, approx. 400 mm, each 423 x 423 mm - Speed restriction stickers 80 km/h on the rear and both sides - Load pressure gauge for determining axle loads, incl. load diagram - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible surfaces finished with ZINACOR 850 (zinc 85% - aluminium 15%) hot metallization

Stav: nový, pohotovostná hmotnosť: 10 900 kg, maximálna hmotnosť nákladu: 37 100 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 890 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17.5, farba: sivý, prevádzková hmotnosť: 10 900 kg, Výbava: ABS, Gooseneck: - Gooseneck in SNT design for optimizing the loading platform length, approx. 3,700 mm long, rear chamfer approx. 1,000 mm x 6° - Technical fifth wheel load: 18,000 kg - For tractor units: 4 x 2 and 6 x 2 Loading Platform: - Loading platform approx. 9,600 mm long with rear chamfer approx. 900 mm x 6° - Platform behind gooseneck hydraulically liftable/lowerable, approx. 3,000 mm long, load capacity up to approx. 9,000 kg - Grating and 5 mm steel plate reinforcement on the chamfered section as additional strengthening Ramps: - One pair of two-piece AXS steel ramps, approx. 4,675 mm long, 900 mm wide - Grating surface - Hydraulically foldable ramp tips - Ramps can be hydraulically shifted individually approx. 235 mm outwards and approx. 365 mm inwards - Painted anti-slip sand-coating on ramp outer frame and ramp tip - Flashing lights mounted on ramp tips with switch next to ramp control panel - Quick-release ramp locks for securing in transport position Axles, Suspension, and Tyres: - BPW axles and suspension, 1st and 2nd axles fixed, 3rd axle self-steering - 1st axle with starting aid - Operated via brake pedal of the tractor unit - Technical axle load: 12,000 kg - Air suspension with raise/lower valve - 235/75 R 17.5 - TPMS (Tyre Pressure Monitoring System) to ECE R 141 specification - TPMS sensors fitted in all wheels, including spares Braking System: - WABCO EBS-E braking system complying with EU regulations Paintwork: - Trailer MB 7350 Nova Grey Included Accessories: - Pin-type steel front wall, approx. 400 mm high - 3 kW electro-hydraulic power unit for hydraulic operations (excluding hydraulic winches) Ljdpfjuadk Nox Af Tsaa - Gooseneck guide plate for fifth wheel, approx. 500 mm wide - JOST Modul B landing gear - static test load = 50,000 kg - Continuous grating with 5 mm steel baseplate as additional reinforcement - Painted sand-coating - Cut-outs in outer frame of platform and lift bed for attaching hydraulic ramp control valves on right side of trailer - 2" king pin - Central lubricating system with 1 pump, brand BEKAMAX - On gooseneck: 1 pair removable ALU side walls, approx. 400 mm high, anodized - Electric cable winch, approx. 5,400 kg pulling force, with radio remote control - Steel cable approx. 24 m long, diameter approx. 9.5 mm, incl. cable pressure roller - WABCO Smart Board system - 4 extendable warning boards, approx. 423 x 423 mm, extendable by approx. 400 mm

Stav: nový, pohotovostná hmotnosť: 14 800 kg, maximálna hmotnosť nákladu: 61 700 kg, celková hmotnosť: 76 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 900 mm, veľkosť pneumatiky: 235/75/r17,5, farba: sivý, Výbava: ABS, Gooseneck: Ljdema Hf Repfx Af Tjaa • Gooseneck with rear bevel approx. 750 mm x 10° • 3 pairs of lashing rings • 30 mm thick hardwood flooring Loading Platform: • Extendable loading platform with rear bevel approx. 500 mm x 8° • 9 pairs of exterior folding lashing rings • 1 pair of flat-mounted lashing rings at the front of the loading platform • Cutouts in the external frame of the loading platform for attaching tensioning straps • Approx. 48 mm thick hardwood flooring, over the axles with checker plate covering Landing Legs: • JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: • BPW axles and suspension, 1st axle self-steering, 2nd and 3rd axle fixed, 4th and 5th axle trailing-steer • Technical axle load: 12,000 kg • 1st, 4th, and 5th axle with electro-magnetic reverse lock, activated by reverse gear and manually • Tyres 235/75 R 17.5 3PMSF Brake System: • WABCO braking system according to EU standards with EBS-E (4S3M) Painting: • Top-quality and durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc-rich primer • High-quality, single-colour 2-component (2K) topcoat in MB 7350 Novagrau • Rear section metallised and painted in RAL 9010 (Pure White) Steel Construction: • Steel construction made from high-strength fine-grained steels • Steel grades: • S355J2+N/S355MC (yield strength 355MPa) • S690QL/S700MC (yield strength 690MPa) Accessories: • One spare wheel with holder in front of the bulkhead • 2'' kingpin • Galvanised steel front wall, approx. 400 mm high • Yellow-red air couplings on the galvanised connection strip at the front • 2 wheel chocks with holder at the front wall • Receptacle at rear section of the gooseneck for ALU loading ramps • Galvanised, extendable widenings approx. 230 mm per side • Bracket for a beacon at the rear of the trailer • Galvanised supports under the rear bevel of the loading platform • White reflector tape according to EU standards at the sides, on the extension and red at the rear • Holders for warning signs incl. socket on both sides of the gooseneck and rear panel • Removable ALU side panels and rear board approx. 2,440 x 400 mm on the gooseneck • Removable rear galvanised stanchions (body length approx. 2,560 mm) • 3 pairs of WADER container locks in the loading platform for a 20ft (30ft) or a 40ft container • 7 pairs of stake pockets 100 x 50 mm in the outer frame of the loading platform • Lift axle on the front axle with control via TEBS E depending on current axle load and loading condition • Sliding mounting rails for ALU loading ramps at the rear • 20 x 20 mm square climbing strips every 200 mm on the outer frame of the loading platform bevel • BEKAMAX central lubrication system (Pico) with standard grease NLGI-2 and removable pump protection • Four extendable warning signs approx. 423 x 423 mm with marker light (extendable by approx. 400 mm) • Holder for beacon on the warning signs • European reflector plates (red-yellow) at the rear of the trailer • 80 km/h speed stickers on the rear and both sides • Load gauge including load diagram for axle load determination • HRM metallisation (High Resistance Metallisation) of the outer frame • Complete steel structure shot-blasted, then defined visible areas metallised with ZINACOR 850 (zinc 85% - aluminium 15%) hot-finished

Stav: nový, pohotovostná hmotnosť: 13 500 kg, maximálna hmotnosť nákladu: 51 500 kg, celková hmotnosť: 69 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 800 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 r17.5, farba: sivý, Výbava: ABS, Gooseneck: Gooseneck in SNT design for optimizing the loading platform length; length approx. 3,700 mm. Gooseneck rear bevel approx. 1,000 mm x 10°. Loading platform: Telescopic loading platform, length approx. 8,800 mm, with rear bevel approx. 500 mm x 10°. Recess in the bevel as well as extending into the loading platform to accommodate the excavator's bucket linkage. Pneumatic locking with conical bolt and reinforced lock positions. Supply lines are protected within the telescopic beam and adapt to the respective platform length. Ramps: 1 pair of two-part steel ramps, approx. 4,350 mm x 900 mm. Hydraulically folding ramp tips. Laedek Ahugopfx Af Tsa Each ramp can be hydraulically shifted approx. 235 mm outward and approx. 215 mm inward. Axles and suspension: BPW axles and suspension, two rigid axles, two self-steering axles. Electromagnetic reverse lockout, activated via reverse gear and manually. Air suspension with raise/lower valve. Axle tools. Tyres: 235/75 R17.5 3PMSF, dual-mounted. Load index: 143/141J (144/144F). Braking system: WABCO brand braking system, EBS-E, compliant with EU regulations. Lighting system: 24-volt lighting system in "ASPÖCK-NORDIK full LED." Metal finishing: Standard HRM metallization of the outer frame. Complete steel structure shot-blasted, then all defined visible surfaces hot-coated with ZINACOR 850 (zinc 85% - aluminum 15%). Steel structure: Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Welders certified to DIN-EN 287-1. MAG welding method according to EN ISO 4063. Protective gas M21 according to EN ISO 14175. Standard accessories included: Removable front wall, steel, height approx. 400 mm. ASPÖCK-UNIBOX at the front connection strip with 24N, 24S, & 15-pin sockets. 24N connection per ISO-118524S connection per ISO-373115-pin connection per ISO-12098. Round NATO socket at the front connection strip. Power cable for supplying the electro-hydraulic unit and/or electric winch (35 mm², 3.5 m long) between trailer and truck tractor with connector (NATO-NATO). 3 kW electro-hydraulic unit for operating hydraulic functions, except hydraulic winches. 1 spare wheel with mounting adapter. External beam of gooseneck with fixing holes for bolted lashing rings; first hole approx. 200 mm from the front, then every approx. 400 mm. 2 pairs of screw-in lashing rings included. Fixing hole at the upper rear of the gooseneck external beams for a bolted lashing ring. 1 pair of screw-in lashing rings. Approx. 40 mm thick hardwood flooring over the gooseneck. On the gooseneck, 1 pair of removable, anodized aluminum sideboards, approx. 400 mm high. On the gooseneck, 1 removable anodized aluminum rear wall, approx. 400 mm high. 2” king pin. Guide plate on gooseneck for fifth wheel plate, approx. 500 mm wide. 4 wheel chocks with holders. Mount for aluminum approach ramps. Mechanical landing legs with 2-speed gearbox and crank. Approx. 50 mm hardwood floor, continuous on the platform and interrupted between the axles. Platform locking with conically welded locking profiles every 250 mm, including pre-tensioning plate. Long holes at the front of the loading platform for hook-in and relocatable bridging elements. 1 intermediate table with recessed platform, approx. 300 mm wide for the extension tube with large cross-section with steel covering. Front and rear with long holes...

Stav: nový, pohotovostná hmotnosť: 10 350 kg, maximálna hmotnosť nákladu: 39 150 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Výbava: ABS, Swan neck: - Swan neck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood floor, 30 mm thick Loading area: - Telescopic loading platform with rear bevel, approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm - Wheel recesses with square climbing bars 15 x 15 mm and widened sections at the bottom - Between 1st and 2nd axle: 1 pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm - 3-part removable galvanized covers over the wheel recesses (W 670 mm) – max. point load 5 t each - Recess in the rear bevel as well as into the loading area for excavator bucket stick storage, approx. 2,900 x 750 x 210/290 mm - 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN) - 5 pairs of outward-folding lashing rings (LC 5,000 daN) - 2 pairs of outward-folding lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) - Cutouts in the outer frame of the platform for attaching tie-down straps (LC 2,000 daN) One-piece ALU ramps: - One pair of one-piece ALU ramps approx. 2,500 x 600 mm - Ramp with spring lifting mechanism, manually adjustable - Maximum load per pair: 24,000 kg Axles and tires: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated automatically via reverse gear and manually - Air suspension with lift and lower valve - Axle tools - Tires 235/75 R 17.5 - TPMS tire pressure monitoring system according to ECE R 141 Accessories included: - 1 spare wheel with holder in front of the headboard - 2-inch king pin - 1 galvanized steel headboard, approx. 400 mm high - Yellow-red air couplings to the galvanized connection rail at the front - 4 wheel chocks with holders on headboard - ALU ramp storage at the rear of the swan neck - Galvanized extendable width extensions, extendable by approx. 230 mm per side - Galvanized folding supports under rear bevel of loading area - 1 beacon mounting bracket at trailer rear - White reflector tape according to EU regulations on the sides; red on extension and rear - Swan neck and rear panel each with 1 holder for warning signs incl. socket, left and right - On swan neck: ALU drop-in side panels and rear panel, approx. 2,440 x 400 mm - The rear galvanized drop-in stakes are removable (superstructure length approx. 2,560 mm) - 2 pairs of WADER container pockets in platform for one 20ft or 30ft container - 3 pairs of stake pockets 100 x 50 mm in outer frame of platform Lasdoiu Er Aopfx Af Tja - 1 removable galvanized intermediate table with 1 pair of WADER container pockets - Square climbing bars 20 x 20 mm every 200 mm on the outer frame at platform's rear bevel - Anti-slip sand finish painted onto tread plates on swan neck and loading area - Four extendable warning signs approx. 423 x 423 mm, extendable by approx. 400 mm, each with position light - Warning signs equipped with bracket for beacon - 80 km/h speed stickers on rear and both sides - Load pressure gauge for axle load determination including load chart - HRM metallization (High Resistance Metallisation) of outer frame - Complete steel structure shot-blasted, then all defined visible areas metallized with ZINACOR 850 (zinc 85% - alu 15%) via hot finishing

Stav: nový, pohotovostná hmotnosť: 15 450 kg, maximálna hmotnosť nákladu: 65 550 kg, celková hmotnosť: 80 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 21 900 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 925 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17.5, farba: sivý, Výbava: ABS, Gooseneck: Gooseneck in SNT design to optimize the loading area length, approximately 3,700 mm long, rear with a bevel of approx. 1,000 mm x 10°. Technical fifth wheel load: 30,000 kg. Suitable for tractor units: 4x2, 6x2, and 6x4. Loading area: Loading area in double-extendable design, approx. 8,800 mm long with a rear bevel of approx. 500 mm x 10°. The central beam features a support table approx. 300 mm wide with long holes at the front and rear for the attachment and repositioning of optional bridging elements, welded in place. Pneumatic locking mechanism with conical locking bolts and reinforced locking positions, the supply lines are safely routed within the extendable beams and automatically adjust to the respective platform length. Axles and tyres: BPW axles and suspension, first axle steered ahead, all other axles hydro-mechanically forced-steered. First axle with electromagnetically actuated reverse lock via reverse gear and manual activation. Technical axle load: 12,000 kg. Air suspension with raise and lower valve. Manufacturer at our discretion. Sockets and lighting: 24-volt lighting system in accordance with EU regulations. ASPÖCK-UNIBOX at the front connection rail with 24N, 24S & 15-pin sockets. Complete HRM metallisation. Complete steel construction shot-blasted, then finished with ZINACOR 850 hot-dip coating. Painting: 6-stage final treatment: Entire steel structure shot-blasted post-welding. One coat zinc-based primer, one coat adhesion primer. Final coating with two coats of 2-component paint, single-tone in DB 7350 Novagrau, followed by sealing of cavities with special wax. Accessories: Detachable steel front wall, approx. 400 mm high. Supply line connection rail to tractor unit mounted at height of outer frame profile. ASPÖCK-UNIBOX at front connection rail with 24N, 24S & 15-pin sockets. Should your pin assignment differ from ISO connector standard, please inform us. 3 kW electric-hydraulic unit to operate hydraulic functions (excluding hydraulic winches). On the gooseneck: one pair of detachable ALU side walls, approx. 400 mm high, anodised finish. 3.5" king pin. Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide. 2 wheel chocks with holders in front of the front wall. Mechanical landing gear with 2-speed gearbox and hand crank. Control valves for hydraulic ramps on the right side of the vehicle. One pair of mechanical rear supports. Central lubrication system with 1 pump, BEKAMAX brand, standard grease per NLGI-2. Removable protector for the central lubrication pump(s). Remote axle steering from front and rear via cable remote control with push buttons, featuring axle alignment monitoring, without installation in tractor unit. Below gooseneck and at the end cross member, one 7-pin socket with warning sign holder each on left and right. One 7-pin socket at the end cross member. User manual and documentation included. Single-piece INOX toolbox, approx. 2,480 x 340 x 390 mm, straight design. Please note: Special equipment and accessories may increase curb weight and thus reduce payload accordingly. Warning package: 4 warning signs, approx. 423 x 423 mm, extendable by approx. 1,000 mm, incl. 2 LED position lights and brackets for beacon. Lajdpfxjrigw Rj Af Tsa

Stav: nový, pohotovostná hmotnosť: 13 250 kg, maximálna hmotnosť nákladu: 47 550 kg, celková hmotnosť: 60 800 kg, konfigurácia náprav: 3 nápravy, zavesenie: vzduch, veľkosť pneumatiky: 245/70 r17.5, farba: sivý, Výbava: ABS, Gooseneck: Gooseneck with rear chamfer of approx. 750 mm x 10°. 3 pairs of lashing rings 30 mm thick hardwood flooring Extendable loading platform: Extendable loading platform with rear chamfer of approx. 1,000 mm x 8° 5 pairs of hinged lashing rings (can be folded outward) 3 pairs of hinged lashing rings (can be folded outward) 1 pair of horizontal lashing rings at the front of the loading platform Cutouts in the outer frame of the loading platform for hooking in tensioning straps Hardwood floor approx. 48 mm thick, anti-slip checker plate over the axles Two-part steel ramps: One pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood overlay. Ramps with hydraulically extendable and retractable ramp sections, hydraulic lifting device, and hydraulically adjustable. Maximum load capacity per pair: 40,000 kg Landing legs: JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test capacity) Axles and tires: BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanical forced steering Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tools Tires: 245/70 R 17.5 Lodpfxel Uxdko Af Tjaa Brake system: Brake system compliant with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit Steel construction: Steel construction made of high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Paintwork: Top-quality, durable corrosion protection of the standard shot-blasted welded frame guaranteed by a two-component (2K) zinc-rich primer High-quality single-color 2-component (2K) top coat in Nova Grey Rear section metalized and painted in RAL 9010 (pure white) No metallic paints possible Electrical system: Electrical system according to EU specifications, 24 volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets Connection as per ISO 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Accessories included: 2" kingpin Galvanized steel front wall approx. 400 mm high Yellow-red air couplings on the galvanized connection bar at the front 4 wheel chocks with holder at the front wall One spare wheel with holder in front of the front wall Electro-hydraulic power pack Remote steering from front and rear via cable remote control with push-button operation and single trace axle control Mount at the rear of the gooseneck for ALU loading ramps European reflective panels (red-yellow) at the rear of the trailer White reflective striping according to EU regulations at the side, at the extension element, and rear in red On the gooseneck and ramps left and right, each with one bracket for warning signs including socket A bracket for a revolving beacon at the rear of the trailer Galvanized folding supports under the chamfer of the loading area Control valves for ramps mounted on the right side of the trailer Cover plates for bridging the gap between ramps and loading area One mudflap at the rear of the trailer Manual and documentation on USB stick Central lubrication system BEKAMAX (Pico) with standard NLGI-2 grease and removable pump guard On the gooseneck, removable ALU side boards and rear board approx. 2,440 x 400 mm Rear galvanized removable stanchions, body length approx. 2,560 mm A toolbox INOX 1,350x400x400 on the gooseneck, box covers oil fill 4 pairs of WADER container locks in the loading platform for one

Stav: nový, maximálna hmotnosť nákladu: 38 100 kg, celková hmotnosť: 50 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 100 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 760 mm, zavesenie: vzduch, veľkosť pneumatiky: 205/65 R17.5 3PMSF, farba: sivý, Výbava: ABS, Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading platform: 5 pairs of folding lashing rings on the outside 3 pairs of folding lashing rings on the outside 1 pair of horizontal lashing rings at the front of the loading platform Cutouts in the outer frame of the loading platform for attaching tie-down straps Approx. 48 mm thick hardwood flooring, over the axles with checker plate covering Ljdpfx Ajtphtmof Tjaa Landing gear: JOST landing legs with 2-speed gearbox for 24 t lifting capacity Axles and tyres: BPW axles, two fixed and two self-steering axles, air suspension, drum brakes, with raise/lower function The self-steering axles can be locked for reversing via electromagnet, activated through reverse gear or manually Axle tools Tyres 205/65 R17.5 3PMSF Braking system: WABCO braking system according to EU regulations with EBS-E Steel construction: High-strength fine grain steel frame Steel grades: S355J2+N/S355MC S690QL/S700MC Electrical equipment: Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets Connection in accordance with ISO Paintwork: Premium, durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component zinc dust primer High-quality 2-component top coat, single color in MB 7350 Novagrau Metallic paint not available Rear section metallized and painted in RAL 9010 Standard equipment included: 1 spare wheel 205/65 R 17.5 TPMS tire pressure monitoring system in accordance with ECE R 141 At the galvanized front connection strip: yellow-red air couplings 4 wheel chocks with brackets on the front wall Mounting at the rear of the gooseneck for ALU loading ramps Galvanized folding supports underneath the sloped section of the loading area One bracket for a rotating beacon at the rear of the trailer Height-adjustable curtain structure Galvanized front wall with a tensioning mechanism for the sliding curtains Adjustable height approx. 400 mm "EDSCHA" brand roof, forward-sliding on ALU roof beam profiles, bolted to front and rear walls 3 pairs of sliding stanchions on the loading area The superstructure can be hydraulically extended at the rear left and right by approx. 750 mm Sliding roof with lift-up portal beam Sliding curtain with 700 mm extra length, with tensioning straps approx. every 600 mm Height to top edge of superstructure approx. 3,960 mm Driving with open sliding roof is not permitted and will cause damage to the curtain Hanger bar for ALU loading ramps at the rear of the vehicle On the gooseneck and on the left and right of the rear panel, each with a bracket for warning signs including socket Mudflap at the rear of the trailer European reflective plates at the rear of the trailer 7 pairs of stake pockets for 100 x 50 mm insertable stakes in the outer frame of the loading platform Lifting axle on the front axle controlled by TEBS E depending on current axle load and loading condition Superstructure at the rear with closed ALU swing doors On the checker plate on the gooseneck and loading area, an integrated sand coating to prevent slipping Central lubrication system BEKAMAX with standard grease NLGI-2 and removable pump guard 80 km/h speed stickers at the rear and on both sides Load gauge for axle load determination including load diagram

Stav: nový, pohotovostná hmotnosť: 34 500 kg, maximálna hmotnosť nákladu: 106 700 kg, celková hmotnosť: 141 200 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 7 150 mm, šírka ložného priestoru: 2 850 mm, výška ložného priestoru: 580 mm, veľkosť pneumatiky: 285/70 R19.5, farba: sivý, prevádzková hmotnosť: 34 500 kg, Výbava: ABS, Gooseneck: - Gooseneck hydraulically liftable/lowerable and detachable - Length approx. 3,650 mm - Extensive lashing positions - For tractor units: 6 x 4 or 8 x 4 3-Axle Compact Front Undercarriage: - Hook mountings at front and rear - Undercarriage length x width approx. 3,560 mm x 2,850 mm - Extensive lashing positions Excavator Deck “BB-A”: - Telescopic excavator deck “BB-A” with drive-over deck hooks at the front and pin-lug coupling at the rear - Length x base width approx. 7,150 mm x 2,850 mm - Beam height x width approx. 430 mm x 1,350 mm - Loading height 580 mm with ground clearance of 150 mm - 5 pairs of hanging lashing rings (LC 10,600 daN) - 4 pairs of M30 threaded blocks on the inner beam for mounting screwable rings 5-Axle Rear Undercarriage: - Mechanical pin-lug coupling at the front for low bed attachment; end cross-member at the rear - Undercarriage length x width approx. 6,840 mm x 2,850 mm - Extensive lashing positions Pendulum Axle and Tyres (front and rear undercarriage): - "PENDULUM AXLE", all axles hydro-mechanically forced steered - Hose rupture valve on axle balancing cylinders with automatic RESET function - Hydraulic cylinders fitted with shut-off taps and locking plugs for securing in raised position - Final coating of axles with two layers of 2K paint, single color MB 7350 Novagrau - Technical axle load: 14,640 kg (62 km/h) - Hydraulic axle compensation - Axle tools - Tyres: 285/70 R19.5 Remote Steering (Follow-up Steering): - Remote steering from front and rear operable via cable remote control with push buttons, with axle tracking monitoring - Socket for remote steering operation at the gooseneck - Cable remote control with push buttons including axle tracking monitoring Accessories included: Ljdpfx Afewhywfe Tjaa - Yellow-red air couplings on galvanized front connection rail - Steel front wall approx. 400 mm high - 4 wheel chocks with holders - 2 spare wheels 285/70 R19.5 - 3.5" king pin - Boom with winch for spare wheel at gooseneck front - Truck hydraulic connection with flow regulator (40 l/min), including boom for suspending service lines; tractor unit tank must have at least 80 liters capacity with connectors - White reflective tape according to EU regulations on the sides and on the extension, red at the rear - Plug-in ALU side boards and tailgate on the gooseneck, approx. 400 mm high, anodized - Control levers on the gooseneck protected by a foldable cover - Separate air connection with air gun at the gooseneck - Central lubrication system BEKAMAX with standard grease NLGI-2, 1x at the gooseneck, 1x at the 3-axle undercarriage, 1x at the 5-axle undercarriage - Variomax tool kit - Multi-coupling hydraulic connections at low bed hook area - Front undercarriage with separate air connection for pneumatic tools - Threaded insert option (ø 40 mm) every approx. 500 mm on the outer web of the excavator deck for screw rings - Foldable width extensions with steel inlays, adjustable from approx. 2,850 mm to 3,250 mm - Steel inlays with approx. 12 mm thick rubber covering - Two INOX toolboxes 855 x 340 x 390 mm - Radio remote control for steering in addition to cable remote control - Sand layer coating as anti-slip protection - 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery

Stav: nový, pohotovostná hmotnosť: 12 900 kg, maximálna hmotnosť nákladu: 34 100 kg, celková hmotnosť: 47 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 850 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 350 mm, zavesenie: iný, veľkosť pneumatiky: 245/70 R 17,5, farba: sivý, prevádzková hmotnosť: 12 900 kg, Výbava: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading platform length, approx. 3,750 mm - Gooseneck hydraulically liftable/lowerable and removable - Technical fifth wheel load: 23,000 kg - Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4 Loading Platform: - Low bed with external beams, extendable “SUPER LOW” design, approx. 6,850 mm long - Low bed with fixed hardwood floor approx. 40 mm thick and mechanical locking Rear Chassis: - Rear chassis with closed outer frame, chequer plate covering, and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear - 2 pairs of lashing rings foldable outwards - 1 pair of lashing rings mounted flat in the trough - 2 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame Pendulum Axle and Tyres: - “PENDEL-AXLE”, all axles hydromechanically forced-steered - Burst protection valve on the axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pre-inserts for securing in raised position - Axles finished with two layers of single-colour 2K paint in "FAY-Grey-34-0260" - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres 245/70 R 17.5 - TPMS tyre pressure monitoring system according to ECE R 141 Accessories: - Prepared for mounting bolt-on container locks for 1x 20ft or 1x 40ft container on the outer beams - 2" kingpin - Galvanised steel front wall, approx. 400 mm high - One spare wheel - At the galvanised connection rail front, yellow-red air couplings - 4 wheel chocks - Forced steering from front and rear controlled via cable remote control with push buttons, includes single-track monitoring of axles - Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings - Electro-hydraulic power pack - White reflective tape on the sides, the extension, and the rear in accordance with EU regulations - European reflective panels (red-yellow) at the rear of the trailer - Brackets at the gooseneck and rear panel left/right for warning signs, including socket - 6 pairs of threaded blocks between lashing rings under the top flange on the outer beam for mounting bolt-on RUD VLBG-4 rings Lsdpfx Afjhlz R Ss Teaa - Plug-in ALU sidewalls and rear wall on the gooseneck approx. 2,440 x 400 mm - The rear galvanised plug-in stakes are removable (body length approx. 2,560 mm) - Gooseneck rear upper area closed with removable cover - 5 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading platform - Folding widening pieces, approx. 230 mm per side - 2 pairs of bolt-on RUD VLBG-4 M24 rings (LC 8,000 daN) - 1 pair of steel ramps for bridging the low bed towing hook - On the loading platform, a coated sand layer as anti-slip protection - 80 km/h speed stickers at the rear and both sides - Rear part of the driving gear’s dipper stick trough covered by a plug-in plate - Four retractable warning boards approx. 423 x 423 mm, extendable by approx. 400 mm - Radio remote control for forced steering, in addition to cable control, with indicator lights on the receiver for axle single-track monitoring - Central lubrication system with 2 BEKAMAX (Pico) pumps using standard NLGI-2 grease - Load gauge for determining axle loads - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible surfaces are metallized with ZINACOR 850 (zinc 85% - alu 15%) and hot-finished

Stav: nový, pohotovostná hmotnosť: 17 250 kg, maximálna hmotnosť nákladu: 48 700 kg, celková hmotnosť: 66 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 7 550 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 375 mm, veľkosť pneumatiky: 245/70 R 17.5, farba: sivý, prevádzková hmotnosť: 17 250 kg, Výbava: ABS, Labutia tyč (Schwanenhals): - Labutia tyč v SNT dizajne na optimalizáciu dĺžky ložnej plochy, dĺžka cca 3 750 mm - Hydraulicky zdvíhateľná/spúšťateľná a zjazdná labutia tyč Laodpfx Afjh Hm Tze Tja - Pre ťahače: 6 x 4 a 8 x 4 (alebo 6 x 4 s voliteľným jednoosovým dolly) Nízka ložná plocha (Tiefbett): - Nízka ložná plocha s vonkajšími nosníkmi, vyhotovená ako teleskopický most na kotly v nízkom prevedení s výsuvom vpredu - Rozmery: dĺžka x šírka cca 7 550 mm x 2 740 mm - Mechanické uzamykanie výsuvu Podvozok: - Zadný podvozok s uzavretým vonkajším rámom - Rebrovaný plechový povrch a priebežná prizmatická výrezová „baggermulda“ cca 1 450/900 x 505 mm, vzadu otvorená Nápravy, pruženie a pneumatiky: - „PENDEL-AXLE“ – všetky nápravy sú hydromechanicky riadené - Ventil proti prasknutiu hadíc na vyrovnávacích valcoch náprav s automatickou funkciou RESET - Hydraulické valce s uzatváracími kohútikmi a predpínačmi na zaistenie vo zdvihnutej polohe - Záverečný lak náprav: 2 vrstvy dvojzložkového laku v jednotnej farbe „FAY-Grau-34-0260“ - Technická nosnosť nápravy: 12 000 kg - Hydraulické vyrovnávanie záťaže na nápravy - Pneumatiky: 245/70 R 17.5 Príslušenstvo: - Predná stena z ocele, zasúvateľná, výška cca 400 mm - 4 ks kliny pod kolesá - Zadná horná časť labutej tyče zakrytá odnímateľným krytom - 1 pár oceľových nájazdových rámp so slikrami a upevňovacími kolíkmi pre mostíky na uchytenie do nízkej ložnej plochy - Rampy je možné položiť nad alebo medzi háky - Možnosti upevnenia oceľových nájazdových rámp vzadu medzi vonkajšími nosníkmi labutej tyče - Zaisťovacie miesta každých cca 1 000 mm na výsuve - 1 upevňovací krúžok vľavo a vpravo na prednom priečniku - Pripojovací panel pre napájacie vedenia k ťahaču, umiestnený na úrovni vonkajšieho rámového profilu - 6 párov závitových blokov na vonkajšej strane vnútorných nosníkov ložnej plochy pre montáž skrutkovacích krúžkov M24 - 6 párov zapustených upevňovacích krúžkov na vonkajšej strane vonkajších nosníkov ložnej plochy, sklopné dovnútra aj von - 1 pár závitových blokov vpredu a vzadu na vonkajších nosníkoch ložnej plochy pre montáž skrutkovacích krúžkov M24 - Závesná lišta pre voľné hliníkové nájazdové rampy na zadnom priečniku vozidla - Centrálne mazanie s dvoma čerpadlami značky BEKAMAX - Riadenie zadnej nápravy vpredu aj vzadu, ovládateľné káblovým diaľkovým ovládaním s kontrolou zarovnania náprav - 3 kW elektrohydraulická jednotka na ovládanie hydrauliky (okrem hydraulických navijakov) - Vyberateľná ložná podlaha (pozinkovaná), 3 diely medzi vonkajšími nosníkmi, s tvrdým drevom - Výklopné rozširovacie dosky cca 230 mm na každú stranu - Voľne položené rozširovacie dosky, s oceľovým rámom - 4 výstražné tabule cca 423 x 423 mm - Rádiové diaľkové ovládanie pre riadenie zadnej nápravy - 3,5'' kráľovský čap (königszapfen) - Protišmykový povrch na ľavom zrážaní labutej tyče - Hydraulické prípojky medzi labuťou tyčou a nízkou ložnou plochou s multispájacou namiesto skrutkových spojov - Vodiaca platňa labutej tyče pre sedlový čap, cca 800 mm široká - 1 rezervné koleso s držadlom - Parkovacie miesto na labutej tyči pre výstražné tabule pri nevyužití - 2 páry vreciek na kolíky zapustené v vonkajšom ráme podvozku pre zasúvacie kolíky cca 100 x 50 mm - Výrez lyžicovej tyče zadného podvozka vzadu uzatvorený zasúvateľnou doskou - Farba návesu: MB 7350 Novagrau

Stav: nový, maximálna hmotnosť nákladu: 49 000 kg, celková hmotnosť: 60 800 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 r 17.5, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck with chamfered front corners at 45° and rear chamfer of approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Laodpfeh Etf Rjx Af Toa Extendable Loading Area: - Extendable loading area with rear chamfer of approx. 1,000 mm x 8° - 5 pairs of fold-out lashing rings on the outside (LC 5,000 daN) - 3 pairs of fold-out lashing rings on the outside (LC 10,000 daN) - 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) - Cut-outs in the external frame of the loading area for attaching tie-down straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, with chequered plate covering over the axles Detachable Two-Part Ramps: - One pair of galvanized, two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood overlay - Ramps with hydraulically folding ramp sections, hydraulic lift and hydraulically adjustable side shift - Max. load per pair: 40,000 kg Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and Tyres: - BPW axles, two rigid axles, two self-steering axles, air-suspended, with drum brakes, lifting/lowering function - The self-steering axles can be locked via electromagnetic reverse lock through reverse gear or manually - Axle tools - Tyres: 235/75 R 17.5 Brake System: - Brake system in accordance with EU regulations with EBS-E (4S3M) Steel Construction: - Steel construction made from high-strength fine-grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Paintwork: - Premium and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc-rich primer - High-quality 2-component (2K) topcoat in single-tone Novagrey Electrical System: - Electrical system according to EU regulations, ASPÖCK-NORDIK (ASS3) 24 Volt lighting - ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets Included Accessories: - 2" king pin - One galvanized steel front wall, approx. 400 mm high - One spare wheel with holder in front of the front wall - Yellow and red air couplings on galvanized front terminal strip - 4 wheel chocks with holder on the front wall - Mounting at the rear of the gooseneck for ALU approach ramps - Galvanized folding supports under the chamfered loading area - Bracket for a rotating beacon - Cover plates to bridge the gap between ramps and loading area - White reflective tape according to EU regulations on the sides, red at the rear and on the extension - Electro-hydraulic power unit - At the gooseneck and on the ramps, left and right, each with mounting for warning panels including socket - Control valves for the ramps mounted on the right side of the semi-trailer - Mudflap at the rear of the trailer - User manual and description on USB stick - Removable ALU side boards and rear panel on the gooseneck, approx. 2,440 x 400 mm - Rear galvanized stanchions removable (body length approx. 2,560 mm) - 4 pairs of WADER container pockets in the loading area for a 20 ft, 2x 20 ft or a 40 ft container - 7 pairs of stake pockets for 100 x 50 mm stakes in the external frame of the loading area - Extensions, galvanized, retractable by approx. 230 mm per side - Lift axle on the front axle with control - 20 x 20 mm square climbing strips - BEKAMAX central lubrication system - Four warning panels extendable by approx. 400 mm (approx. 423 x 423 mm)

Stav: nový, pohotovostná hmotnosť: 17 500 kg, maximálna hmotnosť nákladu: 43 500 kg, celková hmotnosť: 61 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 7 550 mm, šírka ložného priestoru: 2 750 mm, výška ložného priestoru: 400 mm, veľkosť pneumatiky: 245/70 R 17.5, farba: sivý, Výbava: ABS, Neck (Gooseneck): - Gooseneck in SNT design for optimizing loading platform length, approx. 3,750 mm long - Gooseneck hydraulically liftable/lowerable and detachable - For tractor units: 6x4 or 8x4 Deck (Lowbed): - Lowbed with external beams, extendable design, "SUPER LOW" type, approx. 7,550 mm long - Lowbed with fixed hardwood floor, approx. 40 mm thick, with mechanical locking Laodpfxsh Hm The Af Tea - Service lines protected and routed within the extendable beams, automatically adjusting to the respective lowbed length Rear chassis: - Rear chassis with closed outer frame, checker plate surface, and continuous prism excavator trough, approx. 1,450/900 x 505 mm, open at the rear - 2 pairs of stake pockets (100 x 50 mm) on the outer frame for plug-in stakes Axles and tires: - "PENDULUM AXLE", all axles forced-steered hydromechanically - Burst pipe valve to axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and plug pin for securing in raised position - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tires 245/70 R 17.5 / 3PMSF Accessories included: - Prepared for mounted container locks for 1x 20ft or 1x 40ft container on outer beams - 2" king pin - One galvanized steel front wall, approx. 400 mm high - One spare wheel with holder - Yellow-red air couplings on the galvanized front connector strip - 4 wheel chocks - Remote steering front and rear operated by wire remote control via pushbuttons, with single-track axle alignment control - Hydraulic couplings between gooseneck and lowbed as multi-coupling instead of screw type - Electro-hydraulic power pack - White reflective tape as per EU regulations on the sides, at the extension and red on the rear - 2 wooden blocks 500x250x200 mm - European reflective warning panels (red-yellow) at trailer rear - On gooseneck and rear section: holders for warning signs with sockets left and right - Central lubrication system with 2 BEKAMAX (Pico) pumps, standard grease NLGI-2 - Load gauge to determine axle loads, incl. load chart - On gooseneck, plug-in aluminum side walls and rear wall approx. 2,000 x 400 mm - Rear galvanized plug-in stakes removable (body length approx. 2,120 mm) - Separate air connection with air gun on the gooseneck - Duomatic air coupling from gooseneck to lowbed - Gooseneck closed at rear upper section with removable cover - 1 pair of steel ramps for bridging the lowbed receptacle hooks - Four approx. 400 mm extendable warning signs, approx. 423 x 423 mm - Radio remote control for rear steering in addition to cable remote, with receiver indicator lights for single-track alignment - 6 pairs threaded blocks between lashing rings under top chord on outer beam for installation of screwable RUD rings VLBG-4 - 7 pairs of stake pockets (100 x 50 mm) in outer frame of load platform - Folding extensions, approx. 230 mm per side - Anti-slip sand coating painted on load platform - Dipper stick trough at front and rear of rear chassis closed with plug-in plates - HRM Metallization (High Resistance Metallization) of the outer frame - Complete steel construction shot-blasted, then defined visible surfaces metallized with ZINACOR 850 (Zinc 85% - Alu 15%) by hot finishing

Stav: nový, pohotovostná hmotnosť: 15 420 kg, maximálna hmotnosť nákladu: 61 080 kg, celková hmotnosť: 76 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 900 mm, veľkosť pneumatiky: 235/75/r17,5, farba: sivý, Výbava: ABS, Gooseneck: Gooseneck with rear bevel of approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading Area: Extendable loading area with rear bevel of approx. 500 mm x 8° 8 pairs of folding outward lashing rings Lsdpfxjl Sl Izo Af Teaa 1 pair of flat lashing rings at the front of the loading area Cutouts in the outer frame of the loading area for securing load straps Approx. 48 mm thick hardwood flooring, non-slip checker plate cover above the axles Two-piece Steel Ramps: One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering. Ramp parts are hydraulically foldable, equipped with hydraulic lifting mechanism and hydraulic lateral adjustment. Maximum load per pair: 50,000 kg. Landing Legs: • JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: BPW axles and suspension, 4th and 5th axle steering Technical axle load: 12,000 kg 4th and 5th axles with electromagnetic reverse lock activated via reverse gear and manual operation Tyres 235/75 R 17.5 3PMSF Braking System: Braking system according to EU regulations with EBS-E (4S3M) Sockets and Lighting: Electrical system according to EU regulations, 24-volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets Connections according to ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paintwork: First-class and durable corrosion protection, achieved by standard shot-blasted welded frame with a 2-component (2K) zinc dust primer High-quality single color 2-component (2K) topcoat in MB 7350 Novagrau Rear section metallized and painted in RAL 9010 (Pure White) Metallic lacquer not available Steel Structure: Steel construction made from high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Accessories: One spare wheel with bracket in front of the bulkhead 2" kingpin Galvanized steel front wall approx. 400 mm high Yellow-red air couplings on the galvanized front connector strip 2 wheel chocks with holders on the front wall Provision at the rear of the gooseneck for ALU drive-on ramps Bracket for a beacon at the rear of the trailer Galvanized supports under the rear bevel of the loading area White reflector tape according to EU regulations on the sides, at the extension and rear red Electro-hydraulic unit at the rear under the loading area On gooseneck and rear panel (left and right) bracket for warning signs incl. socket Control valves for the ramps installed on the right side of the trailer A mud flap at the rear of the trailer Manual and description on USB stick 3.5" kingpin supplied loose On the gooseneck, plug-in ALU side walls and rear wall approx. 2,440 x 400 mm (LxH) Rear galvanized plug-in stakes are removable (Length of the structure approx. 2,560 mm) 3 pairs of WADER container pockets on the loading area for one 20' (30') or a 40' container 6 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading area Galvanized extensions, extendable by approx. 230 mm per side Lifting axle on the front axle, control via TEBS-E depending on current axle load and loading status Square climb strips 20 x 20 mm, every 200 mm on the outer frame of the loading area bevel On the checker plates, above the kingpin and the loa

Stav: nový, pohotovostná hmotnosť: 9 500 kg, maximálna hmotnosť nákladu: 35 500 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 500 mm, šírka ložného priestoru: 2 540 mm, zavesenie: vzduch, veľkosť pneumatiky: 435/50 R 19.5, farba: sivý, prevádzková hmotnosť: 9 500 kg, Výbava: ABS, Nakladacia plocha v vysunuteľnom vyhotovení: Nakladacia plocha s tvrdými drevenými doskami so zadnou skosením cca 1.000 mm x 8° 1 pár pevne zabudovaných kolísk na kolesá, cca 1.610 x 970 x 400 mm 2 páry upevňovacích krúžkov (LC 5.000 daN) 1 pár upevňovacích krúžkov (LC 10.000 daN) 6 párov smerom von sklopných upevňovacích krúžkov (LC 5.000 daN) 2 páry smerom von sklopných upevňovacích krúžkov (LC 10.000 daN) Výrezy v vonkajšom ráme nakladacej plochy na upevnenie napínacích pásov (LC 2.000 daN) Brzdový systém: Brzdový systém podľa noriem EÚ s EBS-E (2S2M) Lak: Prvotriedna a odolná ochrana proti korózii štandardne guľôčkovo tryskanej zváranej konštrukcie vďaka 2-komponentnej (2K) zinkovej základnej vrstve s práškovým zinkom Vysokokvalitný 2-komponentný (2K) vrchný náter v jednej farbe v odtieni Novagrau Zadná časť metalizovaná a lakovaná v RAL 9010 (čistá biela) Metalický lak nie je možný Návesové podpery: JOST návesové podpery (mechanické) s 2-rýchlostnou prevodovkou, nosnosť 24 t (skúšobná záťaž 50 t) Laedpfx Ask Eammof Toa Oceľová konštrukcia: Oceľová konštrukcia z vysokopevnostnej jemnozrnnej ocele Kvalita ocele: S355J2+N/S355MC (medza klzu 355 MPa) S690QL/S700MC (medza klzu 690 MPa) Elektrická inštalácia: Elektrická inštalácia podľa noriem EÚ, osvetlenie 24 voltov Zásuvky 24N, 24S & 15-kolíková Nápravy a pneumatiky: BPW nápravy, vzduchovo odpružené, s kotúčovými brzdami (377 mm), s funkciou zdvíhania/spúšťania Samosmerovacie nápravy s elektro-magnetickou spätnou blokáciou, aktivovanou spiatočkou alebo manuálne Nápravové náradie Pneumatiky 435/50 R 19.5 Zahrnuté príslušenstvo: Na pozinkovanej prednej prípojnici žlto-červené vzduchové spojky 4 kusy klinov s držiakom 2" kónusový čap Pozinkovaná čelná stena z ocele, výška cca 1600 mm. EN12642-XL Biela reflexná páska podľa predpisov EÚ po bokoch, na výsuvu a vzadu červená Nakladacia plocha so silnou podlahou z tvrdého dreva 9 párov zásuvných vreciek na stĺpiky 100 x 50 mm vo vonkajšom ráme nakladacej plochy 1 držiak na rezervné koleso pod nakladacou plochou v smere jazdy vpravo Pozinkované výklopné podpery pod skosením nakladacej plochy Posuvné zavesovacie lišty na ALU nájazdové rampy na zadnej časti vozidla Európske reflexné tabule (červeno-žlté) na zadnej časti návesu Odstredivý záchyt na zadnej časti návesu Držiak na výstražné svetlo na zadnej časti návesu Na labutom krku a na zadnom nosníku naľavo a napravo držiak na výstražné tabule vrátane zásuvky HDPE náradový box 620x360x610 pod nakladacou plochou v smere jazdy naľavo 4 páry WADER kontajnerových vreciek v nakladacej ploche pre 1x 20ft-kontajner alebo 1x 40ft-kontajner, vo výsuve je pripravené ďalšie uzamknutie pre 45ft-kontajner 3 páry priečnych zásuvných líšt na stĺpiky 100 x 50 mm Zdvihacia náprava na prednej náprave s riadením cez TEBS E v závislosti na aktuálnom zaťažení náprav a aktuálnom stave naloženia Rýchlostná nálepka 80 km/h vzadu a na oboch stranách Štyri približne o 400 mm vysúvateľné výstražné tabule cca 423 x 423 mm s LED pozičnou lampou. Na výstražných tabuliach držiak pre výstražné svetlo Manometer na meranie záťaže na nápravy vrátane diagramu zaťaženia HRM metalizácia (High Resistance Metallisation) vonkajšieho rámu Kompletná oceľová konštrukcia guľôčkovo tryskaná, následne definované viditeľné plochy metalizované

Stav: nový, pohotovostná hmotnosť: 10 600 kg, maximálna hmotnosť nákladu: 35 400 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 500 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 940 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Výbava: ABS, Load platform: - Extendable load platform - Load platform with hardwood planks, rear bevel approx. 500 mm x 8° - 2 pairs of lashing rings (LC 5,000 daN) - 1 pair of lashing rings (LC 10,000 daN) - 6 pairs of fold-out lashing rings to the outside (LC 5,000 daN) Lajdpfx Asl Ux Rwof Toa - 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) - Cut-outs in the outer frame of the loading platform for attaching lashing straps Braking system: - Braking system according to EU regulations with EBS-E (2S2M) Paintwork: - First-class and durable corrosion protection for the standard shot-blasted welded frame, ensured by a two-component (2K) zinc dust primer - High-quality two-component (2K) top coat in single-color Nova Grey - Rear precisely metalized and painted in RAL 9010 (Pure White) - No metallic paint available Landing gear: - JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Steel construction: - Steel structure made of high-strength fine-grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355MPa) - S690QL/S700MC (yield strength 690MPa) Electrical system: - Electrical installation according to EU regulations, 24V LED lighting - 2x 7-pin and 15-pin sockets Axles and tyres: - BPW axles, air suspension, with disc brakes (377 mm), with raise/lower function - Hydro-mechanical forced steering - Axle tools - Twin tyres 235/75 R 17.5 Standard accessories: - Yellow-red air couplings on the galvanized front connection rail - 4 wheel chocks with holders - 2" king pin - Galvanized steel front wall, approx. 1600 mm high - White reflective tape according to EU regulations on the sides, on the extension, and red at the rear - Load platform with heavy-duty hardwood floor - Steering from front and rear via cable - Remote operation via push-button control, with axle steering alignment indicator - Radio remote control for rear steering - 9 pairs of stake pockets for 100 x 50 mm plug-in stakes on the outer frame of the load platform - Galvanized folding supports under the rear bevel of the platform - Movable hook-in rail for aluminium loading ramps at the rear of the vehicle - European reflective panels (red-yellow) at the rear of the trailer - One mud flap at the rear of the trailer - Rear beacon bracket - Warning sign brackets including sockets on the gooseneck and rear plate left/right - INOX toolbox 1500x390x810 mm under platform, right side direction of travel - BEKAMAX (Pico) central lubrication system with NLHI-2 standard grease and removable pump guard - 6 pairs of WADER container locks in the loading platform, for 1x 20ft container, 2x 20ft containers or 1x 40ft container, additional locking position provided in the extension for a 45ft container - 4 pairs of crosswise stake pocket rails in the loading platform for 100 x 50 mm plug-in stakes - Lifting axle on the front axle with TEBS control - depending on current axle load and load status - Speed stickers (80 km/h) on rear and both sides - Four warning signs, extendable by approx. 400 mm, approx. 423 x 423 mm with LED position lights - Bracket for beacon on warning signs - Load pressure gauge for axle load determination incl. load diagram - HRM metalizing (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, metalized with ZINACOR 850 (zinc 85% - alu 15%) and hot-finished at the defined visible areas

Stav: nový, pohotovostná hmotnosť: 11 300 kg, maximálna hmotnosť nákladu: 36 700 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 1 250 mm, zavesenie: vzduch, veľkosť pneumatiky: 385/65 r 22,5, farba: sivo-čierny, Výbava: ABS, Loading platform: Extendable loading platform with pneumatically operated locking mechanism A fixed intermediate table approx. 250 mm wide is mounted on the central beam 8 pairs of lashing rings, foldable outwards (LC 5,000 daN) 3 pairs of lashing rings, foldable outwards (LC 10,000 daN) Cut-outs in the outer frame of the loading platform for attaching lashing straps (LC 2,000 daN) Axles and tyres: BPW axles and suspension, all axles hydro-mechanically forced-steered Disc brakes, technical axle load: 10,000 kg Air suspension with lift and lower valve Axle tools 6-fold tyres, 385/65 R 22.5 Laodpshlz Shjfx Af Tea Brake system: Brake system according to EU regulations with EBS-E (2S2M) Landing legs: JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Steel structure: Steel structure made of high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system: Electrical system according to EU regulations, lighting 24V ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection strip with sockets 24N, 24S & 15-pin Connection according to ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paintwork: First-class and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer High-quality 2-component (2K) single-colour top coat in novagrey Rear section metallised and painted in RAL 9010 (pure white) No metallic paint possible Accessories included: Mountings for warning plates on the gooseneck and on the rear plate, left and right, each with socket Remote steering operated from the front and rear via cable remote control with push buttons, with axle tracking control Electro-hydraulic unit 4 wheel chocks with holder on the front wall 2" king pin Galvanised steel front wall approx. 2,200 mm high Yellow-red air couplings on the galvanised connection strip at the front White reflective tape according to EU regulations on the sides, on the extension and rear in red European reflector panels (red-yellow) at the rear of the semitrailer One mud flap at the rear of the trailer Manual and description Mounting for a rotating beacon at the rear of the trailer Loading platform with approx. 30 mm thick wooden floor enclosed in omega profiles 10 pairs of stanchion sockets for plug-in stanchions 100 x 50 mm on the outer frame of the loading platform 1 spare wheel holder under the loading platform, right-hand side in direction of travel 6 pairs of WADER container pockets in the loading platform, for 1x 20ft container, 2x 20ft container or 1x 40ft container; for 45ft container, an additional locking position is provided in the extension 5 pairs of stanchion rail cross-members mounted transversely in the loading platform, for plug-in stanchions 100 x 50 mm One galvanised holder transversely under the platform (2,390 x 720 x 400 mm) Access ladder mounted on the right-hand side in direction of travel One HDPE toolbox 1,200x500x480 at the front under the loading platform, left-hand side in direction of travel Lift axle on the front axle with control by TEBS E depending on the current axle load and loading condition Central lubrication system with 2 BEKAMAX (Pico) pumps, with standard grease NLGI-2 and removable guard around the pump Red/white reflective tape in the extension of the loading platform Painted sand coating on the central beam as an anti-slip measure Radio remote control for the steering in additi

Stav: nový, pohotovostná hmotnosť: 9 600 kg, maximálna hmotnosť nákladu: 53 400 kg, celková hmotnosť: 63 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 12 400 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 1 340 mm, zavesenie: vzduch, veľkosť pneumatiky: 385/65 R22.5, farba: sivý, Výbava: ABS, Loading area: - Loading platform with approx. 30 mm thick hardwood floor - 10 pairs of fold-out lashing rings on the outside Landing legs: - JOST landing legs with 2-speed gearbox for 24 t lifting capacity Axles and tyres: - BPW axles, technical capacity 10,000 kg, first axle rigid, all other axles hydro-mechanically forced-steered, mounted on turntables - Air suspension with raise and lower valve - Axle tools - Tyres 385/65 R22.5 Braking system: - WABCO braking system according to EU regulations with EBS-E (4S3M) Steel construction: - Steel structure made from high-tensile fine-grain steels - Steel grades: S355J2+N/S355MC S690QL/S700MC Electrical system: - Electrical system according to EU regulations, lighting 24 Volt - ASPÖCK UNIBOX on the front connector strip with 24N, 24S & 15-pin sockets - Connections compliant with ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Painting: - First-class and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component zinc dust primer - High-quality 2-component top coat in a single colour, Nova grey - Rear section metallised and painted in RAL 9010 Accessories included: - Loading area with approx. 30 mm thick hardwood floor - 2" king pin - Galvanised steel front wall approx. 1,200 mm high, EN12642-XL - Yellow-red air couplings at the galvanised front connector strip - 4 wheel chocks with holders at the front wall - Storage for 1,000 mm stake pockets in the central beam at the rear - At the gooseneck and rear plate left and right each a holder for warning signs incl. socket - Remote axle steering operation from the front and rear via cable remote control with push buttons and tracking control - Electro-hydraulic power unit - White reflective tape on sides and red at rear according to EU regulations - 12 pairs of stake pockets for 100 x 50 mm stanchions in the external frame of the loading area - European reflector plates at the rear of the trailer - Mount for a rotating beacon at the rear of the trailer Ljdpfx Aforq Dlfs Tjaa - One mudflap at the trailer rear - Manual and documentation on USB stick - BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and detachable cover around the pump TPMS Tyre Pressure Monitoring System: - For correct display, the towing vehicle must be able to transmit and display this data - Lift axle on the front axle with control via TEBS E, dependent on the current axle load and loading status - Radio remote control for axle steering, in addition to cable remote, with indicator lights on the receiver for tracking control - 5 pairs of stake pocket strips, mounted crosswise on the loading area, for 100 x 50 mm stanchions - 80 km/h speed stickers, mounted at the rear and on both sides - Adjustable access ladder mounted left and right in the direction of travel - 2 reversing lights mounted on the rear panel - Load pressure gauge to determine axle loads including load chart - HRM metallisation of the external frame: Complete steel structure shot-blasted, then the defined visible areas are metallised and hot-finished with ZINACOR 850 (zinc 85% - aluminium 15%)

Stav: použitý, pohotovostná hmotnosť: 14 100 kg, maximálna hmotnosť nákladu: 33 900 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 11/1999, zavesenie: vzduch, veľkosť pneumatiky: 235/75 17,5, stav pneumatík: 50 percento, farba: zelený, Rok výroby: 1999, veľkosť prednej pneumatiky: 235/75 17,5, veľkosť zadnej pneumatiky: 235/75 17,5, kabína vodiča: denná kabína, emisná trieda: žiadny, Výbava: registrácia nákladného vozidla, Referenčné číslo pre dopyty: 68574 Faymonville, plošinový náves * Rok výroby: 1999 * Vzduchové odpruženie * Riadená náprava * Nútene riadená náprava Ljdeyib Ahopfx Af Teaa * Prípojka vzduchu (červená + žltá) * Pripojovací konektor 2x7-pólový * Zdvihacie a spúšťacie zariadenie * Teleskopický – teleskopický náves * Odpruženie: vzduchové * Celková hmotnosť: 48 000 kg * Pohotovostná hmotnosť: 14 100 kg * Nosnosť: 33 900 kg * Povolená celková hmotnosť: 48 000 kg * Výrobca náprav: SAF * Stav pneumatík 1. náprava: 50% -- 50% – Rozmer pneumatík: 235/75 R17,5 * Stav pneumatík 2. náprava: 50% -- 50% – Rozmer pneumatík: 235/75 R17,5 * Stav pneumatík 3. náprava: 50% -- 50% – Rozmer pneumatík: 235/75 R17,5 * Rozmery pneumatík: 235/75 R17,5 * Výrobca: ES-GE * Výsuv nefunkčný * Riadené nápravy bez funkcie * Pohyblivý Vylúčenie zodpovednosti: Zmeny, predaj počas prevádzky a chyby vyhradené Ďalšie fotografie a videá nájdete na našej webovej stránke. Naša komplexná ponuka služieb zahŕňa napríklad: * Nákup / predaj / prenájom úžitkových vozidiel * Rýchle a jednoduché financovanie * Vypracovanie všetkej (exportnej) dokumentácie * Objednanie exportných ŠPZ / colných ŠPZ * Príprava vozidla: nové plachty, popisy, lakovanie atď. * Profesionálne nakladanie / zabezpečenie nákladu * TüV kontroly, registračné služby * Preprava úžitkových vozidiel Opýtajte sa nášho vyškoleného odborného personálu, radi Vám poradíme.

Stav: nový, maximálna hmotnosť nákladu: 30 190 kg, celková hmotnosť: 43 000 kg, konfigurácia náprav: 2 nápravy, Výbava: ABS, You can find our complete range of immediately and short-term available vehicles on our website. Excerpt from the equipment list. Full specification available upon request. Loading platform: - Low bed with externally mounted beams, extendable in SUPER LOW design, approx. 6,850 mm long - Low bed with fixed hardwood floor, approx. 40 mm thick, with mechanical locking - Supply lines are protected within the extendable beams and automatically adjust to the current low bed length - 5 pairs of outward-folding lashing rings (LC 10,000 daN) - 6 pairs of threaded blocks on the inner beam for mounting screw-in RUD rings Gooseneck: - Gooseneck in SNT design for optimum loading length, approx. 3,750 mm long - Gooseneck hydraulically lift/lowerable and removable - Technical fifth-wheel load: 23,000 kg - Suitable for tractor units (4x2, 6x2) Rear chassis: - Rear chassis in short design with closed outer frame and chequer plate cover - Chassis with excavator recess, closed at the rear section for housing air tanks - 2 pairs of outward-folding lashing rings (LC 5,000 daN) - 1 pair of outward-folding lashing rings (LC 10,000 daN) - 1 pair of horizontal lashing rings at front & rear of the chassis (LC 10,000 daN) Axles: - BPW axles with hydro-mechanical forced steering - Technical axle load: 12,000 kg each - Air suspension with lift/lower valve Lajdpfx Ajxarl Nof Tja Tyres: - 245/70 R 17.5 3PMSF tyres, brand of our choice - Load index (146/146F) - TPMS tyre pressure monitoring system (ECE R 141 compliant) - Data transfer to tractor via standardised EBS interface per ISO 11992 - For proper display, the tractor unit must be able to transmit and display these data Brake system: - Brake system compliant with EU regulations with EBS-E (2S2M) Electrical system: - Electrical system per EU regulations, lighting 24 V ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX at the front wiring harness with sockets 24N, 24S & 15 pin according to ISO: 24N ISO-1185, 24S ISO-3731, 15 pin ISO-12098 Steel construction: - Steel structure made of high-strength fine-grained steels - Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: - Entire steel structure automatically shot-blasted after welding - Second blasting with corundum for optimal coating adhesion - Whole vehicle chassis metalized with ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection - Final coat with 2 layers of 2K topcoat, single-colour in RAL 3002 Carmine Red, per RAL system 841GL - Rims in silver - Rear section metalized and painted in RAL 9010 (Pure White) - No metallic finishes possible - Paint structure salt spray-tested per ISO 9227-NSS - Cavities sealed with special wax Includes the following additional equipment: - 2-inch king pin - One galvanized steel front wall, approx. 400 mm high - Remote steering at front and rear via cable remote control with push buttons, incl. single-wheel tracking (without installation in tractor unit) - Hydraulic connections from gooseneck to low bed via multi-coupling instead of screw couplings - Electro-hydraulic power unit - Preparation for mounting screwed container locks for one 20' or one 40' container on the outer beams - No container locks included

Stav: nový, maximálna hmotnosť nákladu: 45 820 kg, celková hmotnosť: 58 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, Celú našu ponuku vozidiel, vrátane okamžite a krátkodobo dostupných vozidiel, nájdete na našej webovej stránke. Výber zo špecifikácie. Kompletnú špecifikáciu poskytneme na požiadanie. Labuťový krk: * Labuťový krk so skosenými rohmi vpredu cca 45° a so zadným skosením cca 750 mm x 10° * 3 páry úväzných krúžkov (LC 5 000 daN) * Podlaha z tvrdého dreva hrúbky cca 30 mm Ložná plocha v vysúvateľnom vyhotovení: * Ložná plocha v vysúvateľnom vyhotovení so zadným skosením cca 1 000 mm x 8° * 5 párov sklápacích úväzných krúžkov smerom von (LC 5 000 daN) * 3 páry sklápacích úväzných krúžkov smerom von (LC 10 000 daN) * 1 pár ležiacich úväzných krúžkov vpredu na ložnej ploche (LC 10 000 daN) * Výrezy v vonkajšom ráme ložnej plochy na upevnenie napínacích pásov (LC 2 000 daN) * Podlaha z tvrdého dreva hrúbky cca 48 mm, nad nápravami podlaha z slzového plechu Nápravy: * BPW nápravy a zavesenie * 1. náprava pevná, ostatné nápravy hydro-mechanicky nútene riadené * Technické zaťaženie nápravy: každá 12 000 kg * Vzduchové odpruženie so zdvíhacím a spúšťacím ventilom * Náradie k nápravám Pneumatiky: * Pneumatiky 245/70 R 17.5 3PMSF, index nosnosti (146/146 F) * Značka podľa nášho výberu * TPMS systém kontroly tlaku v pneumatikách podľa ECE R 141 * Prenos údajov do ťažného vozidla prebieha cez štandardizované EBS rozhranie podľa ISO 11992 * Na správne zobrazenie musí byť ťažné vozidlo schopné tieto údaje prenášať a zobrazovať Oporné nohy: * JOST oporné nohy (mechanické) s 2-rýchlostnou prevodovkou pre cca 24 t zdvíhacej záťaže (cca 50 t testovanej záťaže) Brzdový systém: * Wabco brzdový systém podľa predpisov EÚ s EBS-E (4S3M), bez prepojovacích vedení k ťažnému vozidlu Lak: * Kompletná oceľová konštrukcia po zvarení automaticky otryskaná v zariadení s projektilovým kolesom * Druhé otryskanie korundom pre optimálnu priľnavosť náterového systému * Záverečný náter s 2 vrstvami 2K vrchného laku, jednofarebný podľa RAL 3002 karmínovo červená, podľa systému RAL 841GL * Disky strieborno-sivé * Zadná časť metalizovaná a lakovaná v RAL 9010 (čistá biela) * Nemožno použiť metalický lak * Lakovacia zostava testovaná v soľnej sprejovej komore podľa ISO 9227-NSS * Dutiny uzatvorené špeciálnym voskom Oceľová konštrukcia: * Oceľová konštrukcia z vysokopevnostných jemnozrnných ocelí Laedpsxbmpfjfx Af Tja * Kvality ocele: S355J2+N/S355MC (medza klzu 355 MPa), S690QL/S700MC (medza klzu 690 MPa) Elektrická výbava: * Elektrická výbava podľa predpisov EÚ * Osvetlenie 24 V ASPÖCK-NORDIK (ASS3) * Všetky LED obrysové svetlá blikajú s ukazovateľom smeru * ASPÖCK-UNIBOX na pripojovacej lište vpredu so zásuvkami 24N, 24S a 15-pól. pripojenie podľa ISO * 24N ISO-1185 24S ISO-3731 15-pól. ISO-12098 Vrátane nasledovných prídavných zariadení: * 2“ kráľovský čap * Pozinkovaná oceľová čelná stena, cca 400 mm vysoká * Na pozinkovanej prednej pripojovacej lište žlto-červené vzduchové spojky * Elektro-hydraulická jednotka * Nútené riadenie zpredu aj zozadu ovládateľné cez káblové diaľkové ovládanie s tlačidlami, s kontrolou smerovania všetkých náprav (bez inštalácie v ťažnom vozidle) * Pozinkované výklopné oporné nohy pod skosením ložnej plochy * 1 pár zapustených úväzných krúžkov pozdĺž centrálneho nosníka vzadu v skosení (LC 10 000 daN) * Na labuťovom krku hliníkové bočné a zadné steny, zasúvateľné, cca 2 440 x 400 mm (D x V) * Zadné pozinkované zasúvateľné zarážky sú odnímateľné (dĺžka nadstavby cca 2 560 mm) * Jeden galvanizovaný box na náradie, integrovaný v skosenom labuťovom krku * 3 páry WADE

Stav: nový, maximálna hmotnosť nákladu: 39 670 kg, celková hmotnosť: 50 960 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, Celý náš aktuální vozový park s okamžitě a krátkodobě dostupnými vozidly najdete na našich webových stránkach. Výňatek z výbavy. Kompletní seznam výbavy na vyžádání. Labutí krk: * Labutí krk s tvrdodřevěnou podlahou cca 30 mm silnou * Labutí krk vzadu v přímém provedení * 3 páry vázacích ok (LC 5 000 daN) Nákladová plocha: * Nákladová plocha v provedení s výsuvem * 5 párů výklopných vázacích ok (LC 5 000 daN) * 3 páry výklopných vázacích ok (LC 10 000 daN) * 1 pár vodorovných vázacích ok vpředu v nákladové ploše (LC 10 000 daN) * Výřezy ve vnějším rámu nákladové plochy pro zavěšení upínacích pásů (LC 2 000 daN) * Tvrdodřevěná podlaha cca 48 mm silná, nad nápravami provedení s protiskluzovým plechem Nápravy: * BPW nápravy, dvě nápravy pevné, dvě nápravy s nuceným řízením * Vzduchové odpružení s funkcí zvedání/snížení * Řiditelné nápravy s elektromagnetickou reverzní blokací, aktivace přes zpátečku nebo manuálně * Bubnové brzdy * Nápravařské nářadí Pneumatiky: * 205/65 R 17.5 * Značka dle naší volby * Systém kontroly tlaku v pneumatikách TPMS dle ECE R 141 * Přenos dat do tahače probíhá přes standardizované EBS rozhraní dle ISO 11992 * Pro správné zobrazení musí být tahač schopen tato data přijímat a zobrazovat Brzdová soustava: * Brzdová soustava dle předpisů EU s EBS-E (4S3M) bez propojovacích vedení k tahači Ocelová konstrukce: * Ocelová konstrukce z vysocepevnostních jemnozrnných ocelí * Kvalita oceli: S355J2+N/S355MC (mez kluzu 355 MPa), S690QL/S700MC (mez kluzu 690 MPa) Lakování: * Kompletní ocelová konstrukce po svařování automaticky tryskána kruhovým paprskem * Druhé tryskání korundem pro optimální přilnavost nátěrového systému * Metalizace celého podvozku vozidla HRM ZINACOR 850 (85 % zinek/15 % hliník) pro nejlepší ochranu proti korozi * Vrchní lakování 2 vrstvami dvousložkového laku, jednobarevně v RAL 3002 karmínově červená dle systému RAL 841GL * Ráfky stříbrné * Zadní část vozidla metalizována a lakována v RAL 9010 (čistě bílá) * Metalický lak není možný * Systém nanášení laku testován v solné komoře dle ISO 9227-NSS * Dutiny uzavřeny speciálním voskem Elektrická soustava: * Elektrická soustava dle předpisů EU, osvětlení 24 V ASPÖCK-NORDIK (ASS3) * Všechny LED boční obrysové světla blikají současně s blinkrem * ASPÖCK-UNIBOX na čelní přípojnici s 24N, 24S & 15pól. zásuvkami dle ISO (24N ISO-1185, 24S ISO-3731, 15pól. ISO-12098) Lasdpfxexarlve Af Tea Příslušenství v ceně: * 2palcový královský čep * Držák rezervního kola před čelní stěnou * Na pozinkované čelní přípojnici žluté a červené vzduchové spojky * Pozinkované sklápěcí podpěry pod zkosením nákladové plochy * Pozinkovaná ocelová přední stěna (EN12642-XL), výška cca 1 600 mm * Hliníkové bočnice a zadní stěna na labutím krku, zasunovací, cca 2 440 x 400 mm (d x v) * Zadní pozinkované odnímatelné zasunovací sloupky (délka nástavby cca 2 560 mm) * Podpěrný stojan s 1 párem WADER kontejnerových kapes, nosnost cca 20 000 kg * 7 párů WADER kontejnerových kapes pro 1x 20' kontejner v nákladové ploše * 1x 40' kontejner v nákladové ploše, 1x 40' kontejner na labutím krku, 2x 20' kontejnery * 7 párů kapes na sloupky pro zasunovací sloupky 100 x 50 mm ve vnějším rámu nákladové plochy * Jeden pozinkovaný držák napříč pod

Stav: nový, maximálna hmotnosť nákladu: 36 360 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, Celú našu aktuálnu ponuku vozidiel, ktoré sú ihneď alebo v krátkom čase dostupné, nájdete na našej webovej stránke. Výňatok zo špecifikácie. Kompletná výbava na požiadanie. Krk labute: * Krk labute so zrezanými rohmi vpredu (cca 45°) a zošikmením vzadu (cca 750 mm x 10°) * 3 páry upevňovacích ôk (LC 5 000 daN) * Podlaha z tvrdého dreva, hrúbka cca 30 mm Ložná plocha: * Teleskopická ložná plocha so zošikmením vzadu (cca 1 000 mm x 8°) * 1 pár pevne zabudovaných kolísk na kolesá pred nápravami, cca 2 850 x 970 x 400 mm (DxŠxV) * Kolísky na kolesá s lezeckými lištami (cca 15 x 15 mm) a rozšírením v spodnej časti * Medzi prvou a druhou nápravou jeden pár pevne zabudovaných kolísk na kolesá, cca 1 610 x 970 x 400 mm (DxŠxV) * Vrátane trojdielnych odnímateľných pozinkovaných krytov nad kolískami na kolesá (šírka cca 670 mm) – max. bodové zaťaženie 5 t/kus * Prehlbenie vo zošikmení aj na ložnej ploche na usadenie ramena lyžice bagra (cca 2 900 x 750 x 210/290 mm DxŠxV) * 1 pár ležatých upevňovacích ôk vpredu na ložnej ploche (LC 10 000 daN) * 5 párov výklopných upevňovacích ôk (LC 5 000 daN) * 2 páry výklopných upevňovacích ôk (LC 10 000 daN) * 2 páry upevňovacích ôk v kolíske na násadu bagra (LC 5 000 daN) * Výrezy v vonkajšom ráme ložnej plochy na upevňovacie pásy (LC 2 000 daN) Dvojdielne oceľové rampy: * 1 pár pozinkovaných dvojdielnych oceľových rámp, cca 2 750 + 1 400 x 800 mm, s cca 48 mm silnou podlahou z tvrdého dreva * Rampy s hydraulicky výklopnými časťami a hydraulickým zdvíhacím mechanizmom, hydraulicky posuvné * Maximálne zaťaženie na pár: 40 000 kg Opory návesu: JOST opory návesu (mechanické) s dvojstupňovou prevodovkou pre nosnosť cca 24 t (skúšobné zaťaženie cca 50 t) Nápravy: * BPW nápravy a zavesenie, 2 pevné nápravy, 1 riadená doťahovaná náprava * Technická nosnosť na nápravu: každá 12 000 kg * Elektromagnetický spätný zámok aktivovateľný spiatočkou a manuálne * Vzduchové odpruženie so zdvíhacím a spúšťacím ventilom Obutie: * Pneumatiky 235/75 R 17.5 3PMSF – značka podľa nášho výberu TPMS: * Systém kontroly tlaku v pneumatikách podľa ECE R 141 Brzdový systém: * WABCO brzdový systém v súlade s európskymi predpismi s EBS-E (2S2M) Lak: * HRM metalizácia celého podvozku vozidla so ZINACOR 850 (85 % zinok/15 % hliník) pre najlepšiu antikoróznu ochranu * Konečná lakovaná úprava dvoma vrstvami 2K vrchného laku, jednobarevná podľa RAL 3002 karmínová červená, podľa systému RAL 841GL * Disky kolies v striebornej šedej Vrátane nasledovnej doplnkovej výbavy: * 2“ koníkový čap * Pozinkovaná oceľová predná stena, výška cca 400 mm * 3 páry zapustených upevňovacích ôk pozdĺž centrálneho nosníka (LC 5 000 daN) * Elektrohydraulická jednotka v zadnej časti, pod ložnou plochou * Na krku labute hliníkové bočné steny a zadná stena, nasadzovacie, cca 2 440 x 400 mm (DxV). Zadné pozinkované nasadzovacie stĺpiky sú odnímateľné (dĺžka nadstavby cca 2 560 mm) Lasdpfeyhkq Uox Af Tja * Jeden galvanizovaný náradový box integrovaný do šikmého hrdla labute * 2 páry kontajnerových vreciek WADER na ložnej ploche pre 20‘ alebo 30‘ kontajner * 3 páry vreciek na stĺpiky približne 100 x 50 mm vo vonkajšom ráme ložnej plochy * 3 páry prídavných, odnímateľných, pozinkovaných krytov nad kolískou na kolesá – max. bodové zaťaženie 3,5 t/kus * Jeden odnímateľný pozinkovaný medzistôl s 1 párom vreciek WADER na kontajnery * 1 ďalší zavesiteľný medzistôl, šírka cca 300 mm * Medzistôl s rozšírenou ložnou plochou pre premostovacie elementy * Uchytenie pre...

Stav: nový, maximálna hmotnosť nákladu: 51 780 kg, celková hmotnosť: 65 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, You can find our entire vehicle inventory with immediately and short-term available vehicles on our website. Excerpt from the equipment. Complete specifications available upon request. GOOSENECK: * Gooseneck in SNT design to optimize the loading platform length, length approx. 3,700 mm, sloped at the rear approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Removable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic power unit for controlling hydraulic functions, excluding hydraulic winches * Outer beams on the gooseneck with mounting holes for bolted lashing rings * One mounting hole in the rear upper area of the gooseneck outer beams for a bolted lashing ring * 1 pair of screw-in lashing rings included (LC 10,000 daN) * On the gooseneck, 1 pair of plug-in side aluminum drop sides, approx. 400 mm high, anodized finish * On the gooseneck, 1 plug-in rear aluminum drop side, approx. 400 mm high, anodized finish * On the gooseneck, approx. 40 mm thick hardwood flooring * 2-inch kingpin * 1 crosswise stake pocket strip in the gooseneck floor before the slope, for plug-in stakes approx. 100 x 50 mm LOADING PLATFORM: * Retractable loading platform, length approx. 8,800 mm, with rear slope approx. 500 mm x 10° * One depression in the platform and extending into the slope for accommodating excavator dipper stick approx. 2,490 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system complying with ECE R 141 * BPW axles and suspension, 1st and 2nd axles fixed, 3rd and 4th axles trailing steerable * 3rd and 4th axles with electro-magnetic reversing lock, actuated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * Mechanical landing legs with 2-speed gearbox and crank * Continuous hardwood flooring on the platform, 50 mm thick, interrupted between the axles (increased coefficient of friction) * 1 intermediate table with offset platform, approx. 300 mm wide, for extension tube with large cross-section, sheet metal covering * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 6 pairs recessed lashing rings in the outer frame of the loading platform, foldable outwards (LC 10,000 daN) * Additionally, 1 pair of lashing rings on the front cross member of the platform, rotated approx. 90° inwards towards the platform (LC 10,000 daN) * Retractable extensions (galvanized) approx. 230 mm per side (without wooden planks) * 1 pair of fixed integrated wheel wells, open up to the extension, approx. 700 x 410 mm (W x D), in the platform ahead of the 1st axle * Between the 2nd and 3rd axles in the platform, 1 pair of fixed integrated wheel wells, approx. 1,695 x 700 x 410 mm (L x W x D) * 1 pair of mechanical rear supports Ljdpfx Afsyhkrlo Tsaa * 245/70 R 17.5 3PMSF dual tires – manufacturer at our discretion HYDRAULIC LOADING RAMPS: * DR-15/60-900-4350-HB-HV-M * One pair of two-piece steel ramps, length approx. 4,350 mm and width approx. 900 mm * Hardwood covering; hydraulically folding ramp tips * Ramps can be hydraulically moved individually approx. 235 mm outwards and approx. 215 mm inwards * Hardwood covering on the slope of the platform * Ramp with hardwood covering BRAKING SYSTEM: * WABCO EBS-E braking system in compliance with EU regulations SURFACE TREATMENT: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum)