Faymonville 4(2+2)-Achs Multimax Baggermulde Tele 2Xnachlauf kúpiť použité (59 566)

Stav: nový, pohotovostná hmotnosť: 15 420 kg, maximálna hmotnosť nákladu: 61 080 kg, celková hmotnosť: 76 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 900 mm, veľkosť pneumatiky: 235/75/r17,5, farba: sivý, Výbava: ABS, Gooseneck: Gooseneck with rear bevel of approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading Area: Extendable loading area with rear bevel of approx. 500 mm x 8° 8 pairs of folding outward lashing rings 1 pair of flat lashing rings at the front of the loading area Cutouts in the outer frame of the loading area for securing load straps Approx. 48 mm thick hardwood flooring, non-slip checker plate cover above the axles Two-piece Steel Ramps: One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering. Ramp parts are hydraulically foldable, equipped with hydraulic lifting mechanism and hydraulic lateral adjustment. Maximum load per pair: 50,000 kg. Landing Legs: • JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: BPW axles and suspension, 4th and 5th axle steering Technical axle load: 12,000 kg 4th and 5th axles with electromagnetic reverse lock activated via reverse gear and manual operation Tyres 235/75 R 17.5 3PMSF Braking System: Braking system according to EU regulations with EBS-E (4S3M) Sockets and Lighting: Electrical system according to EU regulations, 24-volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets Connections according to ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paintwork: First-class and durable corrosion protection, achieved by standard shot-blasted welded frame with a 2-component (2K) zinc dust primer High-quality single color 2-component (2K) topcoat in MB 7350 Novagrau Rear section metallized and painted in RAL 9010 (Pure White) Metallic lacquer not available Steel Structure: Steel construction made from high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Accessories: One spare wheel with bracket in front of the bulkhead 2" kingpin Galvanized steel front wall approx. 400 mm high Yellow-red air couplings on the galvanized front connector strip 2 wheel chocks with holders on the front wall Provision at the rear of the gooseneck for ALU drive-on ramps Bracket for a beacon at the rear of the trailer Galvanized supports under the rear bevel of the loading area White reflector tape according to EU regulations on the sides, at the extension and rear red Electro-hydraulic unit at the rear under the loading area On gooseneck and rear panel (left and right) bracket for warning signs incl. socket Control valves for the ramps installed on the right side of the trailer A mud flap at the rear of the trailer Manual and description on USB stick 3.5" kingpin supplied loose Bledpol Sl Izofx Adveg On the gooseneck, plug-in ALU side walls and rear wall approx. 2,440 x 400 mm (LxH) Rear galvanized plug-in stakes are removable (Length of the structure approx. 2,560 mm) 3 pairs of WADER container pockets on the loading area for one 20' (30') or a 40' container 6 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading area Galvanized extensions, extendable by approx. 230 mm per side Lifting axle on the front axle, control via TEBS-E depending on current axle load and loading status Square climb strips 20 x 20 mm, every 200 mm on the outer frame of the loading area bevel On the checker plates, above the kingpin and the loa

Stav: nový, pohotovostná hmotnosť: 9 500 kg, maximálna hmotnosť nákladu: 35 500 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 500 mm, šírka ložného priestoru: 2 540 mm, zavesenie: vzduch, veľkosť pneumatiky: 435/50 R 19.5, farba: sivý, prevádzková hmotnosť: 9 500 kg, Výbava: ABS, Nakladacia plocha v vysunuteľnom vyhotovení: Nakladacia plocha s tvrdými drevenými doskami so zadnou skosením cca 1.000 mm x 8° 1 pár pevne zabudovaných kolísk na kolesá, cca 1.610 x 970 x 400 mm 2 páry upevňovacích krúžkov (LC 5.000 daN) 1 pár upevňovacích krúžkov (LC 10.000 daN) 6 párov smerom von sklopných upevňovacích krúžkov (LC 5.000 daN) 2 páry smerom von sklopných upevňovacích krúžkov (LC 10.000 daN) Výrezy v vonkajšom ráme nakladacej plochy na upevnenie napínacích pásov (LC 2.000 daN) Brzdový systém: Brzdový systém podľa noriem EÚ s EBS-E (2S2M) Lak: Prvotriedna a odolná ochrana proti korózii štandardne guľôčkovo tryskanej zváranej konštrukcie vďaka 2-komponentnej (2K) zinkovej základnej vrstve s práškovým zinkom Vysokokvalitný 2-komponentný (2K) vrchný náter v jednej farbe v odtieni Novagrau Zadná časť metalizovaná a lakovaná v RAL 9010 (čistá biela) Metalický lak nie je možný Návesové podpery: JOST návesové podpery (mechanické) s 2-rýchlostnou prevodovkou, nosnosť 24 t (skúšobná záťaž 50 t) Oceľová konštrukcia: Oceľová konštrukcia z vysokopevnostnej jemnozrnnej ocele Kvalita ocele: S355J2+N/S355MC (medza klzu 355 MPa) S690QL/S700MC (medza klzu 690 MPa) Bodpfxok Eamms Advjlg Elektrická inštalácia: Elektrická inštalácia podľa noriem EÚ, osvetlenie 24 voltov Zásuvky 24N, 24S & 15-kolíková Nápravy a pneumatiky: BPW nápravy, vzduchovo odpružené, s kotúčovými brzdami (377 mm), s funkciou zdvíhania/spúšťania Samosmerovacie nápravy s elektro-magnetickou spätnou blokáciou, aktivovanou spiatočkou alebo manuálne Nápravové náradie Pneumatiky 435/50 R 19.5 Zahrnuté príslušenstvo: Na pozinkovanej prednej prípojnici žlto-červené vzduchové spojky 4 kusy klinov s držiakom 2" kónusový čap Pozinkovaná čelná stena z ocele, výška cca 1600 mm. EN12642-XL Biela reflexná páska podľa predpisov EÚ po bokoch, na výsuvu a vzadu červená Nakladacia plocha so silnou podlahou z tvrdého dreva 9 párov zásuvných vreciek na stĺpiky 100 x 50 mm vo vonkajšom ráme nakladacej plochy 1 držiak na rezervné koleso pod nakladacou plochou v smere jazdy vpravo Pozinkované výklopné podpery pod skosením nakladacej plochy Posuvné zavesovacie lišty na ALU nájazdové rampy na zadnej časti vozidla Európske reflexné tabule (červeno-žlté) na zadnej časti návesu Odstredivý záchyt na zadnej časti návesu Držiak na výstražné svetlo na zadnej časti návesu Na labutom krku a na zadnom nosníku naľavo a napravo držiak na výstražné tabule vrátane zásuvky HDPE náradový box 620x360x610 pod nakladacou plochou v smere jazdy naľavo 4 páry WADER kontajnerových vreciek v nakladacej ploche pre 1x 20ft-kontajner alebo 1x 40ft-kontajner, vo výsuve je pripravené ďalšie uzamknutie pre 45ft-kontajner 3 páry priečnych zásuvných líšt na stĺpiky 100 x 50 mm Zdvihacia náprava na prednej náprave s riadením cez TEBS E v závislosti na aktuálnom zaťažení náprav a aktuálnom stave naloženia Rýchlostná nálepka 80 km/h vzadu a na oboch stranách Štyri približne o 400 mm vysúvateľné výstražné tabule cca 423 x 423 mm s LED pozičnou lampou. Na výstražných tabuliach držiak pre výstražné svetlo Manometer na meranie záťaže na nápravy vrátane diagramu zaťaženia HRM metalizácia (High Resistance Metallisation) vonkajšieho rámu Kompletná oceľová konštrukcia guľôčkovo tryskaná, následne definované viditeľné plochy metalizované

Stav: nový, pohotovostná hmotnosť: 10 600 kg, maximálna hmotnosť nákladu: 35 400 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 500 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 940 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Výbava: ABS, Load platform: - Extendable load platform - Load platform with hardwood planks, rear bevel approx. 500 mm x 8° - 2 pairs of lashing rings (LC 5,000 daN) - 1 pair of lashing rings (LC 10,000 daN) - 6 pairs of fold-out lashing rings to the outside (LC 5,000 daN) - 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) - Cut-outs in the outer frame of the loading platform for attaching lashing straps Braking system: - Braking system according to EU regulations with EBS-E (2S2M) Paintwork: - First-class and durable corrosion protection for the standard shot-blasted welded frame, ensured by a two-component (2K) zinc dust primer - High-quality two-component (2K) top coat in single-color Nova Grey - Rear precisely metalized and painted in RAL 9010 (Pure White) - No metallic paint available Landing gear: - JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Steel construction: - Steel structure made of high-strength fine-grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355MPa) - S690QL/S700MC (yield strength 690MPa) Electrical system: - Electrical installation according to EU regulations, 24V LED lighting - 2x 7-pin and 15-pin sockets Axles and tyres: - BPW axles, air suspension, with disc brakes (377 mm), with raise/lower function - Hydro-mechanical forced steering - Axle tools - Twin tyres 235/75 R 17.5 Standard accessories: - Yellow-red air couplings on the galvanized front connection rail - 4 wheel chocks with holders - 2" king pin - Galvanized steel front wall, approx. 1600 mm high - White reflective tape according to EU regulations on the sides, on the extension, and red at the rear - Load platform with heavy-duty hardwood floor - Steering from front and rear via cable - Remote operation via push-button control, with axle steering alignment indicator - Radio remote control for rear steering Bledpfx Ael Ux Rwedveg - 9 pairs of stake pockets for 100 x 50 mm plug-in stakes on the outer frame of the load platform - Galvanized folding supports under the rear bevel of the platform - Movable hook-in rail for aluminium loading ramps at the rear of the vehicle - European reflective panels (red-yellow) at the rear of the trailer - One mud flap at the rear of the trailer - Rear beacon bracket - Warning sign brackets including sockets on the gooseneck and rear plate left/right - INOX toolbox 1500x390x810 mm under platform, right side direction of travel - BEKAMAX (Pico) central lubrication system with NLHI-2 standard grease and removable pump guard - 6 pairs of WADER container locks in the loading platform, for 1x 20ft container, 2x 20ft containers or 1x 40ft container, additional locking position provided in the extension for a 45ft container - 4 pairs of crosswise stake pocket rails in the loading platform for 100 x 50 mm plug-in stakes - Lifting axle on the front axle with TEBS control - depending on current axle load and load status - Speed stickers (80 km/h) on rear and both sides - Four warning signs, extendable by approx. 400 mm, approx. 423 x 423 mm with LED position lights - Bracket for beacon on warning signs - Load pressure gauge for axle load determination incl. load diagram - HRM metalizing (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, metalized with ZINACOR 850 (zinc 85% - alu 15%) and hot-finished at the defined visible areas

Stav: nový, pohotovostná hmotnosť: 9 600 kg, maximálna hmotnosť nákladu: 53 400 kg, celková hmotnosť: 63 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 12 400 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 1 340 mm, zavesenie: vzduch, veľkosť pneumatiky: 385/65 R22.5, farba: sivý, Výbava: ABS, Loading area: - Loading platform with approx. 30 mm thick hardwood floor - 10 pairs of fold-out lashing rings on the outside Landing legs: - JOST landing legs with 2-speed gearbox for 24 t lifting capacity Axles and tyres: - BPW axles, technical capacity 10,000 kg, first axle rigid, all other axles hydro-mechanically forced-steered, mounted on turntables - Air suspension with raise and lower valve Blodsrq Dlfjpfx Advsg - Axle tools - Tyres 385/65 R22.5 Braking system: - WABCO braking system according to EU regulations with EBS-E (4S3M) Steel construction: - Steel structure made from high-tensile fine-grain steels - Steel grades: S355J2+N/S355MC S690QL/S700MC Electrical system: - Electrical system according to EU regulations, lighting 24 Volt - ASPÖCK UNIBOX on the front connector strip with 24N, 24S & 15-pin sockets - Connections compliant with ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Painting: - First-class and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component zinc dust primer - High-quality 2-component top coat in a single colour, Nova grey - Rear section metallised and painted in RAL 9010 Accessories included: - Loading area with approx. 30 mm thick hardwood floor - 2" king pin - Galvanised steel front wall approx. 1,200 mm high, EN12642-XL - Yellow-red air couplings at the galvanised front connector strip - 4 wheel chocks with holders at the front wall - Storage for 1,000 mm stake pockets in the central beam at the rear - At the gooseneck and rear plate left and right each a holder for warning signs incl. socket - Remote axle steering operation from the front and rear via cable remote control with push buttons and tracking control - Electro-hydraulic power unit - White reflective tape on sides and red at rear according to EU regulations - 12 pairs of stake pockets for 100 x 50 mm stanchions in the external frame of the loading area - European reflector plates at the rear of the trailer - Mount for a rotating beacon at the rear of the trailer - One mudflap at the trailer rear - Manual and documentation on USB stick - BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and detachable cover around the pump TPMS Tyre Pressure Monitoring System: - For correct display, the towing vehicle must be able to transmit and display this data - Lift axle on the front axle with control via TEBS E, dependent on the current axle load and loading status - Radio remote control for axle steering, in addition to cable remote, with indicator lights on the receiver for tracking control - 5 pairs of stake pocket strips, mounted crosswise on the loading area, for 100 x 50 mm stanchions - 80 km/h speed stickers, mounted at the rear and on both sides - Adjustable access ladder mounted left and right in the direction of travel - 2 reversing lights mounted on the rear panel - Load pressure gauge to determine axle loads including load chart - HRM metallisation of the external frame: Complete steel structure shot-blasted, then the defined visible areas are metallised and hot-finished with ZINACOR 850 (zinc 85% - aluminium 15%)

Stav: nový, pohotovostná hmotnosť: 8 300 kg, maximálna hmotnosť nákladu: 36 700 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 1 080 mm, zavesenie: vzduch, veľkosť pneumatiky: 385/65 R 22.5, farba: sivý, Výbava: ABS, zdvíhacie čelo, Loading Platform: Extending loading platform design with pneumatically operated locking mechanism. Cut-outs in the outer frame of the loading platform for securing lashing straps. Landing Legs: JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity. Axles and Tyres: BPW air suspension axles with disc brakes (430 mm), equipped with lift/lower function. Trailing steering axle with electromagnetically activated reverse lockout, switchable via reverse gear or manually. Axle toolbox. Tyre size 385/65 R 22.5. Brake System: WABCO braking system compliant with EU regulations, fitted with EBS-E. Paintwork: Premium and durable corrosion protection of the standard shot-blasted welded frame by means of 2-component (2K) zinc dust primer. High-quality single-tone 2-component top coat in MB 7350 Novagrau. Rear section metallised and painted in RAL 9010. Metallic paint not possible. Steel Construction: Steel structure made from high-tensile fine-grain steels. Steel Grades: S355J2+N/S355MC S690QL/S700MC Electrical System: Electrical installation according to EU regulations. Bljdoikyh Hopfx Advsg Lighting: 24 Volt ASPÖCK-NORDIK. ASPÖCK-UNIBOX on the front connection strip with 24N, 24S, and 15-pin sockets. Connections in accordance with ISO standards. Accessories Included: Galvanised air coupling connectors (yellow-red) on the front connection strip. Galvanised steel front wall, approx. 1,600 mm high, EN12642-XL. 4 wheel chocks with bracket. White reflective tape according to EU regulations at the sides, extension, and red at the rear. European reflective boards at the rear of the trailer. Loading platform with approx. 30 mm thick hardwood floor, enclosed in Omega profiles. 10 pairs of stake pockets for 100 x 50 mm square stakes in the outer frame. 1 spare wheel holder below the loading platform, right side when facing the direction of travel. Manual and documentation. Bracket for rotating beacon at the rear of the trailer. On the gooseneck and on the rear apron, left and right, each with bracket for warning signs including socket. Anti-slip sand coating painted onto the central beam. 6 pairs of WADER container pockets in the loading platform for 1x 20ft container, 2x 20ft containers, or 1x 40ft container. For an extended 45ft container, an additional locking position is provided. 4 pairs of cross stake pocket rails, mounted transversely on the loading platform for 100 x 50 mm plug-in stakes. 1 galvanised bracket mounted transversely under the loading platform (2,390 x 720 x 400 mm). Access ladder mounted on the right side in the direction of travel. Lift axle on the front axle, controlled by TEBS E, depending on current axle load and loading status. Load gauge for axle load assessment, including load diagram. HRM metallisation of the outer frame: complete steel structure shot-blasted, followed by hot-finish metallisation of the defined visible surfaces with ZINACOR 850.

Stav: nový, pohotovostná hmotnosť: 10 000 kg, maximálna hmotnosť nákladu: 41 600 kg, celková hmotnosť: 51 600 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 540 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Výbava: ABS, Ložná plocha: - Labutí krk, délka cca 4 100 mm se středovým nosníkem - Ložná plocha ve výsuvném provedení, délka cca 9 500 mm se zkosením na zádi cca 350 mm x 10° a integrovanou závěsnou lištou pro nasazení volných ALU nájezdových ramp - Pneumatické zamykání s kuželovými uzamykacími čepy a zesílenými zajišťovacími pozicemi - Napájecí vedení je uloženo chráněně ve výsuvných nosnících a automaticky se přizpůsobuje aktuální délce ložné plochy Nápravy, odpružení a pneumatiky: - BPW nápravy a zavěšení, všechny nápravy hydromechanicky nuceně řízené - Montováno na otočné točně - Technické zatížení nápravy: 12 000 kg - Vzduchové odpružení se zdvihovým a spouštěcím ventilem - Pneumatiky 235/75 R17.5, dvoumontáž Lakování: - 6-ti komponentní povrchová úprava - Kompletní ocelová konstrukce po svařování otryskána - Jedna vrstva základního nátěru na bázi zinku, jedna vrstva adhezního primeru - Vrchní lakování dvěma vrstvami 2K akrylového laku v barvě MB 7350 Novagrau, poté utěsnění dutin speciálním voskem Ocelová konstrukce: - Ocelová konstrukce z vysoce pevných jemnozrnných ocelí - Kvalita oceli: - S355J2+N/S355MC (mez kluzu 355 MPa) - S690QL/S700MC (mez kluzu 690 MPa) - Svařeči certifikovaní dle DIN-EN 287-1 - Svařování metodou MAG dle EN ISO 4063, ochranný plyn M21 dle EN ISO 14175 Příslušenství: - Čelo z oceli, cca 1 600 mm vysoké - Kulatá NATO zásuvka na přední přípojnici - 3 kW elektrohydraulická jednotka pro ovládání hydraulických funkcí - 4 páry zapuštěných kotevních ok v vnějším rámu labutího krku - 4 páry kapes na sloupky v rámu labutího krku, pro sloupky cca 100x50 mm - 1 příčná lišta na kapsy na sloupky v ložné podlaze labutího krku, pro sloupky cca 100x50 mm (1x vzadu na labutím krku) - 2“ královský čep - Mechanické podpěry se dvourychlostní převodovkou a kličkou - JOST Modul B – statická zkušební zatížitelnost = 50 000 kg Bledpsiuy Nljfx Advjg - Na labutím krku a ložné ploše cca 32 mm dřevěná podlaha, zapuštěná v ALU Omega profilech - Na výsuvu zajišťovací pozice cca každých 500 mm - 10 párů zapuštěných kotevních ok ležících ve vnějším rámu ložné plochy, vyklápěcí směrem ven - 6 párů kapes na sloupky ve vnějším rámu ložné plochy, pro sloupky cca 100x50 mm - 2 příčné lišty na kapsy na sloupky v ložné podlaze - Nerezový nářadlový box cca 1 250 x 500 x 550 mm - Zkosení na zadním příčníku vozidla cca 350 mm 10° - Integrovaná závěsná lišta pro volné alu nájezdové rampy na zadním příčníku - 1 pár opěrných trubek u zadního příčníku - Blatníky na všech nápravách - Centrální mazací zařízení s 1 čerpadlem - Dálkové řízení přední a zadní nápravy prostřednictvím kabelového dálkového ovladače pomocí tlačítka, s kontrolou sbíhavosti - Pod labutím krkem i vzadu na zadním příčníku vlevo a vpravo vždy jedna 7-pólová zásuvka na výstražné tabule - Jedna 7-pólová zásuvka na zadním příčníku - Příprava na přepravu kontejnerů „TWIST-LOCKS“ v ložné ploše pro přepravu 2x 20ft a 1x 40ft kontejnerů - Dálkové ovládání řízení navíc ke kabelovému dálkovému ovladači, se 2 kontrolkami na přijímači jako kontrola sbíhavosti - 2 manometry nápravové zátěže + diagram zátěže nápravy - 4 výstražné tabule cca 423 x 423 mm výsuvné o cca 400 mm - Standardní HRM metalizace (High Resistance Metallisation) vnějšího rámu - Kompletní ocelová konstrukce otryskána, poté definované viditelné plochy metalizovány žárově ZINACOR 850 (Zn 85% - Al 15%)

Stav: nový, maximálna hmotnosť nákladu: 36 020 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 540 mm, zavesenie: vzduch, veľkosť pneumatiky: 435/50 R 19.5, farba: sivý, Výbava: ABS, Loading Platform: - Loading platform with extendable design featuring pneumatically operated locking system - 2 pairs of lashing rings (LC 5,000 daN) - 1 pair of lashing rings (LC 10,000 daN) - 6 pairs of outward-folding lashing rings (LC 5,000 daN) - 2 pairs of outward-folding lashing rings (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for attaching tensioning straps Axles and Tyres: - BPW axles, air-suspended, with disc brakes (377 mm), equipped with lifting/lowering function - Self-steering axles with electromagnetic reverse lock, activated via reverse gear or manually - Axle tools - Tyres 435/50 R 19.5 Brake System: - Brake system in accordance with EU regulations with EBS-E (2S2M) Paintwork: - Premium, long-lasting corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer - High-quality single-tone 2-component (2K) topcoat in Novagrau - Rear section metallized and painted in RAL 9010 (Pure White) - Metallic paint finish not possible Landing Legs: Bodpfx Aei Dwlwsdvjlg - JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Steel Construction: - Steel construction made from high-tensile fine-grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical System: - Electrical system compliant with EU regulations, lighting 24 Volt ASPÖCK-NORDICK (ASS3) - ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets - Connection as per ISO - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Included Accessories: - Yellow-red air couplings on the galvanized front connection bar - 2 wheel chocks with holder - 2" kingpin - A galvanized steel front wall, approx. 1,600 mm high - Yellow reflector tape in accordance with EU regulations on the sides, extension section, and rear of the trailer - European reflector plates (Red-Yellow) at the rear of the trailer - Loading platform with approx. 38 mm thick hardwood flooring - 10 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the platform - 1 spare wheel holder under the loading platform on the right-hand side in the direction of travel - Manual and description on USB stick - 1 mudflap at the rear of the trailer - 1 bracket for a beacon at the rear of the trailer - On the gooseneck and the rear plate, left and right, each with bracket for warning signs including socket - 1 INOX toolbox mounted crosswise under the platform (1,000 x 400 x 2,500mm) - 6 pairs of WADER container pockets in the platform, for 1x 20ft container, 2x 20ft containers or 1x 40ft container; an additional locking point is provided in the extension section for a 45ft container - 3 pairs of stake pocket strips, mounted transversely in the platform, for plug-in stakes 100 x 50 mm - 60 km/h speed sticker at the rear - 2 reversing spotlights mounted on the rear plate - Four warning signs extendable by approx. 400 mm (approx. 423 x 423 mm) each with a position lamp - Bracket for beacon on the warning signs - HRM metallization (High Resistance Metallization) of the outer frame - Complete steel construction shot-blasted, then all defined visible surfaces metallized and hot-finished with ZINACOR 850 (85% zinc – 15% aluminium)

Stav: nový, pohotovostná hmotnosť: 14 350 kg, maximálna hmotnosť nákladu: 53 450 kg, celková hmotnosť: 67 800 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 800 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Výbava: ABS, zdvíhacie čelo, Swan neck: - Swan neck in SNT design to optimize the loading platform length, approx. 3,700 mm long - Swan neck at the rear with a taper, approx. 1,000 mm x 10° - Suitable for tractor units: 6x2, 6x4, 8x4 short Loading platform: - Extendable loading platform, approx. 8,800 mm long, with a rear taper of approx. 500 mm x 10° - Recess in the loading platform, including into the taper, to accommodate the excavator stick, approx. 3,850 x 750 x 210/290 mm Two-piece steel ramps: - One pair of two-piece steel ramps, approx. 4,350 mm long and approx. 900 mm wide - Ramps with rubber lining - Ramps can be hydraulically moved individually approx. 235 mm outward and approx. 215 mm inward - "Super Grip" rubber flooring 25 mm and metal flooring approx. 5 mm as additional reinforcement on the platform’s taper - Square climbing strips 20 x 30 mm, spaced approx. every 200 mm along the external ramp frame Axles, suspension, and tyres: - BPW axles and suspension, first axle steering ahead, all other axles hydromechanically forced-steered - Technical axle load: 12,000 kg - First axle with electromagnetic reverse lock, activated by reverse gear and manually selectable - Air suspension with lift and lower valve - Tyres 235/75 R 17.5 - TPMS tyre pressure monitoring system according to ECE R141 - TPMS sensors mounted in all wheels including spare wheels Surface treatment: - Complete steel construction shot-blasted after welding using a shot blasting plant - Second round of blasting with corundum for optimum coating adhesion - HRM-metallisation of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection - Final painting with 2 coats of 2K top coat in single colour MB 7350 Novagrau Accessories included: - Plug-in steel front wall, approx. 400 mm high - 3kW electro-hydraulic power unit for controlling hydraulic functions, excluding hydraulic winches - 1 spare wheel - External member on the swan neck with mounting holes for boltable lashing rings - First hole approx. 200 mm from the front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - 1 pair of horizontal lashing rings at the rear of the swan neck - On the swan neck: 1 pair of plug-in ALU side walls, approx. 400 mm high, anodised - On the swan neck: one plug-in ALU rear wall, approx. 400 mm high, anodised - Over the swan neck approx. 40 mm thick hardwood flooring, over the king pin area treadplate covering Blodpjya E A Nofx Advog - 2" king pin - Round NATO socket on the front connection strip - 4 wheel chocks - 1 intermediate table, approx. 300 mm wide - 1 pair of lashing rings on the front cross member - 8 pairs of recessed lashing rings in the outer frame of the platform, foldable to the outside - Extendable (galvanised) widenings by approx. 230 mm each side - Wheel recesses with square climbing strips, 15 x 15 mm before the axles, open all the way to the swan neck cross member, approx. 700 x 410 mm - Wheel recesses with square climbing strips, 15 x 15 mm between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm - ALU covers for the wheel recesses, which can also be used as bridging elements for the extension or as widening planks - 1 pair of mechanical rear supports - Radio and cable remote control - Lift axle on the front axle - Square climbing strips 20 x 30 mm, approx. every 200 mm - Central lubrication system with 1 pump - Wabco Smart Board system - 4 warning panels, approx. 423 x 423 mm, extendable by approx. 400 mm

Stav: nový, pohotovostná hmotnosť: 9 300 kg, maximálna hmotnosť nákladu: 38 700 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 1 200 mm, zavesenie: vzduch, veľkosť pneumatiky: 385/65 R 22,5, farba: sivo-čierny, Výbava: ABS, Ložná plocha: • Výsuvná ložná plocha s pneumaticky ovládaným uzávěrem • Ložná plocha s cca 30 mm silnou podlahou z dřevěného masivu • 7 párů vyklápěcích vázacích ok směrem ven (LC 5 000 daN) • 3 páry vyklápěcích vázacích ok směrem ven (LC 10 000 daN) • Výřezy ve vnějším rámu ložné plochy pro zavěšení upínacích pásů (LC 2 000 daN) Nápravy a pneumatika: • Nápravy BPW a odpružení, všechny nápravy hydro-mechanicky nuceně řízené • Se kotoučovými brzdami • Technické zatížení nápravy: 10 000 kg • Vzduchové odpružení s ventilem pro zvedání a spouštění • Nářadí pro nápravy • Pneumatiky: 385/65 R 22,5 • Systém kontroly tlaku v pneumatikách TPMS dle ECE R 141 Brzdový systém: • Brzdový systém WABCO dle předpisů EU s EBS-E (2S2M) Elektrické zařízení: • Elektrická instalace dle předpisů EU, osvětlení 24 V ASPÖCK-NORDIK (ASS3) • ASPÖCK-UNIBOX na připojovací liště vpředu se zásuvkami 24N, 24S & 15-pin Bsdpeiu Etrjfx Advelg • Připojení dle ISO • 24N ISO-1185 • 24S ISO-3731 • 15-pin ISO-12098 Příslušenství v ceně: • Řízení zadní nápravy zepředu a zezadu pomocí kabelového dálkového ovládání s tlačítky, s kontrolou jedné stopy náprav • 4x zajišťovací klíny s držákem na čelní stěně • 2" královský čep • 1x pozinkovaná čelní stěna z oceli, cca 1 600 mm vysoká • Na pozinkované připojovací liště vpředu žluto-červené vzduchové spojky • Bílé reflektorové pásky dle EU na bocích, výsuvu a vzadu na návěsu v červené barvě • Evropské reflektorové štítky (červeno-žluté) vzadu na návěsu • 1x zástěrka vzadu na návěsu • Návod k obsluze a popis • Držák pro výstražné světlo vzadu na návěsu • Ložná plocha s cca 30 mm silnou dřevěnou podlahou zakrytá Omega-profily • 10 párů kapes na sloupky pro zasouvací sloupky 100 x 50 mm ve vnějším rámu ložné plochy • 1x držák rezervního kola pod ložnou plochou vpravo ve směru jízdy • Elektrohydraulická jednotka • Na labutím krku a zadní části vlevo i vpravo držák výstražných štítů včetně zásuvky • Na centrálním nosníku lakovaná vrstva písku jako ochrana proti smyku • 6 párů kontejnerových kapes WADER v ložné ploše, pro 1x 20ft, 2x 20ft nebo 1x 40ft kontejner, u výsuvu další uzamykací bod pro 45ft kontejner • 4 páry příčných kapes pro sloupky 100 x 50 mm v ložné ploše • Montovaná nástupní žebřík vpravo ve směru jízdy • 1x box na nářadí z HDPE cca 1 200 x 500 x 480 mm vpředu pod ložnou plochou vlevo ve směru jízdy • Centrální mazací zařízení BEKAMAX (Pico) s odnímatelným krytem čerpadla • Zvedací náprava na přední nápravě s ovládáním přes TEBS E v závislosti na aktuálním zatížení nápravy a stavu naložení • Bezdrátové dálkové ovládání pro řízení náprav navíc ke kabelovému ovládání, s kontrolkami na přijímači pro kontrolu jedné stopy • Čtyři výsuvné výstražné tabule cca 400 mm, cca 423 x 423 mm s pozičním světlometem • Na výstražných tabulích držák pro výstražné světlo • Nálepky s omezením rychlosti 80 km/h vzadu a na obou stranách • Manometr pro měření zatížení náprav včetně zatěžovacího diagramu • Metalizace HRM (High Resistance Metallisation) vnějšího rámu • Celá ocelová konstrukce tryskána, poté definované viditelné plochy metalizované a žárově upraveny ZINACOR 850 (zinek 85 % - hliník 15 %)

Stav: nový, maximálna hmotnosť nákladu: 38 800 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5 3PMSF, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck with chamfered front corners at 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable loading platform: - Extendable loading platform with rear chamfer approx. 1,000 mm x 8° - 6 pairs of outward-folding lashing rings (LC 5,000 daN) - 3 pairs of outward-folding lashing rings (LC 10,000 daN) - 1 pair of flat-mounted lashing rings at the front of the loading area (LC 10,000 daN) - Cut-outs in the outer frame of the loading platform for securing straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, over the axles with anti-slip chequer plate Axles and tires: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lowering valve - Axle tools - 235/75 R 17.5 3PMSF Brake system: - WABCO brake system according to EU regulations with EBS-E (2S2M) Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox, 24t lifting capacity (50t test load) Included accessories: - One spare wheel with holder in front of the bulkhead - 2-inch king pin - Galvanized steel bulkhead, approx. 400 mm high - Yellow and red air couplings on the galvanized front connector strip - 4 wheel chocks with holders at the bulkhead - Mount for rotating beacon at the rear of the trailer - Receptacle at the rear of the gooseneck for ALU approach ramps - Galvanized folding supports under the chamfer of the loading platform - Cover plates for bridging the gap between ramps and platform - White reflective tape according to EU regulations on sides, extension, and red at the rear - Electro-hydraulic unit positioned at the rear, under the platform - On the gooseneck and ramps, left and right, mounts for warning signs including power socket - Control valves for the ramps installed on the right side of the trailer - One mud flap at the rear of the trailer - User manual and documentation on USB stick - ALU side walls and rear wall approx. 2,440 x 400 mm on the gooseneck - The rear, galvanized plug-in stanchions are removable (structure length approx. 2,560 mm) - Four extendable warning signs approx. 423 x 423 mm with position light, extendable by approx. 400 mm Bljdpfx Ajuqlmnjdveg - 3 pairs of WADER container pockets in the platform suitable for a 20ft, 30ft, or 40ft container - 6 pairs of 100x50 mm stanchion pockets in the external frame of the loading platform - Galvanized side extensions, extendable by approx. 230 mm per side - 20 x 20 mm square lashing rails every 200 mm on the external frame of the platform's chamfer - Anti-slip sand coating, painted on chequer plates above the king pin and on the loading platform - Mount for rotating beacon on warning signs - European reflective boards (red-yellow) at the rear of the trailer - 80 km/h speed stickers at the rear and both sides - Load manometer for axle load measurement including load diagram - HRM metallization (High Resistance Metallisation) of the external frame - Complete steel structure shot-blasted, then all defined visible surfaces hot-metal sprayed with ZINACOR 850 (zinc 85% - aluminum 15%)

Stav: nový, pohotovostná hmotnosť: 12 800 kg, maximálna hmotnosť nákladu: 36 200 kg, celková hmotnosť: 49 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 850 mm, šírka ložného priestoru: 2 550 mm, výška ložného priestoru: 375 mm, veľkosť pneumatiky: 245/70 R 17.5, farba: sivý, prevádzková hmotnosť: 12 800 kg, Výbava: ABS, Gooseneck: - Gooseneck in SNT design to optimize loading platform length, length approx. 3,750 mm - Gooseneck hydraulically raisable/lowerable and detachable Blodpfx Adevy Edcsvog - Technical fifth wheel load: 25,000 kg - For tractor units: 4 x 2, 6 x 2, and 6 x 4 Loading Platform: - Low bed with external beams, designed as a telescopic vessel bridge in low-profile construction with front extension - Length 6,850 mm x width 2,540 mm - One locking position approx. every 1,000 mm on the extension Rear Chassis: - Rear chassis with closed outer frame, checker plate cover, and continuous prismatic excavator trough approx. 1,250/700 x 505 mm, open at the rear Axles, Suspension, and Tyres: - "PENDLE-AXLE", all axles hydro-mechanically forced-steered - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and locking pin for securing in lifted position - Axles finished with 2 coats of 2K acrylic paint, single color in "FAY-Grey-34-0260" - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres 245/70 R 17.5 - TPMS tire pressure monitoring system according to ECE R 14 - TPMS tire pressure sensors mounted in all wheels including spare wheels Accessories included: - Plug-in front wall made of steel, approx. 400 mm high - 3 kW electro-hydraulic unit for controlling hydraulic functions, except hydraulic winches - One spare wheel with mounting adapter - Outer beams on gooseneck with mounting holes for bolted lashing rings - Detachable ALU side walls on gooseneck, approx. 400 mm high, anodized - Detachable ALU rear wall on gooseneck, approx. 400 mm high, anodized - Checker plate cover above the gooseneck - Guide plate on gooseneck for the fifth wheel plate, approx. 500 mm wide - Operating area on gooseneck illuminated with on/off switch - Hydraulic crossbeam to support the gooseneck on the tractor unit or a dolly - 2" king pin - Anti-slip stickers on the left chamfer of the gooseneck - Rear upper part of the gooseneck closed with a removable cover - 4 wheel chocks with holders - Hydraulic connections from gooseneck to low bed with multi-coupling instead of screw couplings - 1 pair of steel ramps with climbing strips and mounting bolts for bridging the mounting hooks of the low bed - Ramps can be placed over or between the hooks - Mounting provision for steel ramps at the rear between the outer beams of the gooseneck - Prepared to accommodate bolt-on container mounts for 1x20ft on the outer beams - Mechanical pin-lug coupling from low bed to chassis for exchange of loading platform or installation of extension beams - With electro-pneumatic-hydraulic couplings - Outer beams of the low bed with integrally painted anti-slip sand layer - Removable (galvanized) loading floor in 3 sections insertable between outer beams with hardwood covering - Folding wideners, approx. 230 mm per side - Hanging bar at the front of the rear chassis for loose drive-on ramps for the low bed - 2 pairs of stake pockets recessed in the outer frame of the chassis, for plug-in stakes approx. 100 x 50 mm - Hanging bar for loose ALU ramps on the rear cross member of the vehicle - Central lubrication system with 2 pumps - Radio and cable remote control - 4 warning signs, approx. 423 mm x 423 mm, extendable - Extensive lashing positions

Stav: nový, pohotovostná hmotnosť: 22 700 kg, maximálna hmotnosť nákladu: 79 300 kg, celková hmotnosť: 102 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 11 000 mm, šírka ložného priestoru: 2 850 mm, výška ložného priestoru: 920 mm, veľkosť pneumatiky: 245/70 R 17.5, farba: sivý, prevádzková hmotnosť: 22 700 kg, Výbava: ABS, Swan neck: - Swan neck in SNT design for optimizing the loading platform length, approx. 3,750 mm long, with rear chamfer approx. 850 mm x 10° - Hydraulically raisable and lowerable, lifting stroke ± 250 mm including hydraulic connection linked to the hydraulic axle compensation of the first two axles - Open at the rear third - Suitable for tractor units: 6 x 4 and 8 x 4 Loading platform: - Extendable loading platform, approx. 11,000 mm long with rear chamfer approx. 500 mm x 10°. - Recess in the loading platform including in the bevel for accommodating the excavator bucket arm, approx. 4,240 x 900 x 440 mm - Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the respective platform length Ramps: - Pair of two-part steel ramps, approx. 4,650 mm long and 900 mm wide - Hydraulically foldable ramp tips - Ramps hydraulically adjustable sideways approx. 235 mm outward and approx. 215 mm inward, individually - "Super Grip" rubber surface 25 mm and steel plate approx. 5 mm as additional reinforcement on the loading platform bevel - Rectangular climbing strips 20x30 mm, approx. every 200 mm on the outer ramp frame Axles, suspension and tyres: - PA-X axle system, all axles force-steered hydro-mechanically - Steering behavior of the first two axles can be optimally adjusted to the loading platform length, both mechanically and hydraulically - Hose rupture valve on the axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pins for securing in raised position - 245/70 R 17.5 3PMSF Accessories included: - Removable steel front wall, approx. 400 mm high - Supply line connection strip for tractor unit, mounted at the height of the outer frame profile - 1 spare wheel - Outer beams of the swan neck with mounting holes for screwable lashing rings - First hole approx. 200 mm from front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - Tread plate covering over the swan neck - On the swan neck, 1 pair of removable ALU side walls, approx. 400 mm high, anodized - Removable ALU rear wall on the swan neck, approx. 400 mm high, anodized - 3.5" king pin / 2" king pin mounted - Guide plate on the swan neck for the fifth wheel, approx. 500 mm wide Bjdek Af Svjpfx Advelg - 4 wheel chocks - 4 axle load gauges - Mechanical drop supports at the front - 1-piece INOX toolbox, approx. 2,480 x 340 x 390 mm - Mechanical drop supports at the front - Continuous steel plate covering on the loading platform with painted-on sand layer as slip protection - 1 intermediate table, approx. 500 mm wide, for extension, with elongated holes for insertable and repositionable bridging elements - Painted-on sand coating on the support surfaces of the intermediate table - Mechanical lock for locking the intermediate table when extended - 8 pairs of stake pockets in the outer frame - Extendable galvanized widening sections, approx. 230 mm per side - 1 pair of hydraulic rear supports - Central lubrication system - 1 reversing spotlight each on the left and right at the rear of the vehicle - 3 kW electric-hydraulic power unit - Loose widening planks in reinforced steel U-profile frame - Radio and cable remote control - 4 warning signs, approx. 423 x 423 mm

Stav: nový, pohotovostná hmotnosť: 15 900 kg, maximálna hmotnosť nákladu: 63 500 kg, celková hmotnosť: 68 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 12 700 mm, šírka ložného priestoru: 2 740 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75/r17,5, farba: sivý, prevádzková hmotnosť: 52 100 kg, Výbava: ABS, Gooseneck: Gooseneck in SNT design to optimize the loading area length, approx. 3,300 mm long, rear with chamfer approx. 1,000 mm x 10° Technical fifth-wheel load: 23,000 kg For tractor units: 6x2, 6x4, and 8x4 Loading Area: Extendable loading area, approx. 9,400 mm long with rear chamfer approx. 500 mm x 10° A recess in the loading area and chamfer for the excavator dipper stick, approx. 3,850 x 950 x 210/290 mm Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the respective loading length Axles and Tyres: BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanically forced-steered Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tools 235/75 R 17.5 3PMSF twin tyres Bledpfx Ademfqi Iovog Load index 143/141J (144/144F) Two-piece Steel Ramps: One pair of two-piece steel ramps approx. 4,350 mm long and approx. 900 mm wide Hardwood covering Hydraulically folding ramp tips; each ramp can be hydraulically shifted approx. 235 mm outward and approx. 215 mm inward Braking System: WABCO EBS-E brake system in accordance with EU regulations Sockets and Lighting: 24-volt lighting system Full Metallization: Complete HRM metallization with ZINACOR 850 for maximum corrosion protection Surface Treatment: Entire steel structure automatically blast-cleaned with shot wheels after welding Second blast cleaning with corundum for optimum coating adhesion Final painting in single-color Nova Gray with two coats of 2K paint; cavities then sealed with special wax Rims in silver gray Steel Structure: Steel structure made of high-strength fine-grain steels Steel grades: S355J2+N/S355MC S690QL/S700MC Accessories: Detachable steel front wall, approx. 400 mm high Supply line connection rail for tractor unit Coiled cable to supply the electro-hydraulic power unit and/or electric winch between semi-trailer and tractor unit with plug; electro-hydraulic unit for controlling hydraulic functions, except hydraulic winches Gooseneck side members with mounting holes for bolted lashing rings First hole approx. 200 mm from the front, subsequently every approx. 400 mm A mounting hole in the upper rear area of the gooseneck side member for a bolted lashing ring Approx. 40 mm thick hardwood covering above the gooseneck, checker plate covering above the kingpin Guide plate from the gooseneck for the fifth-wheel plate, approx. 500 mm wide Continuous 50 mm thick hardwood covering on the loading platform and interrupted hardwood between the axles Loading platform locking with conically welded locating profiles every 250 mm, including prestressing plate Slotted holes for insertable and adjustable bridging elements: on the fixed part behind the gooseneck at the front of the loading area 1 movable intermediate table for the extension tube with large cross-section Control valves for hydraulic ramps on the right side of the vehicle Central lubrication system with 1 pump, with standard grease in accordance with NLGI-2 Radio remote control for operating the steering, in addition to the cable remote control; receiver features two indicator lights for single-track monitoring

Stav: použitý, maximálna hmotnosť nákladu: 34 440 kg, celková hmotnosť: 46 500 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 06/1999, dĺžka ložného priestoru: 13 550 mm, šírka ložného priestoru: 2 500 mm, výška ložného priestoru: 950 mm, celková šírka: 2 550 mm, Celková hmotnosť: 46.500 kg Pohotovostná hmotnosť: 12.060 kg Užitočné zaťaženie: 34.440 kg Celková dĺžka: 13.550 mm - 26.550 mm Blsdjycpbnspfx Advsg Šírka: 2.550 mm Ďalšie informácie - 3 nápravy hydraulicky nútene riadené - Preklápací klin nad sedlom - Lišta na zavesenie rámp - Zasúvacie kolíky na ložnú plochu - Dvojité teleskopické vysunutie až do 26.550 mm - Skrinka na náradie na labutom krku - Elektrokoleso - Príprava eln - Hydraulická funkcia doťahovania s elektrickým diaľkovým ovládaním - Veľký balík upevňovacích prostriedkov - Vlastná hydraulická čerpacia jednotka Ďalšie nové a použité nízkozdvižné návesy k dispozícii. Viac informácií na

Stav: nový, maximálna hmotnosť nákladu: 67 200 kg, celková hmotnosť: 85 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, You can find our complete vehicle inventory, including immediately and soon-available vehicles, on our website. Excerpt from equipment. Full specification available on request. GOOSENECK * Gooseneck in SNT design to optimize platform length, approx. 3,700 mm long, rear tapered approx. 1,000 mm x 10° * For tractors: 6x2, 6x4, and 8x4 short wheelbase * Steel front wall, removable, approx. 400 mm high * 3 kW electro-hydraulic power pack for controlling hydraulic operations, except for hydraulic winches * Outer beams of gooseneck with mounting holes for bolted lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of removable ALU side walls, approx. 400 mm high, anodized * 1 removable ALU rear wall, approx. 400 mm high, anodized * Over the gooseneck, approx. 40 mm thick hardwood floor; over the king pin, checker plate floor * 3.5-inch king pin * Guide plate from gooseneck for fifth wheel plate, approx. 500 mm wide Bjdpfx Adergzv Nevslg * Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow control, incl. cabling bracket for supply lines (Faymonville couplings) * 2 pairs of stake pockets recessed into the gooseneck for approx. 100 x 50 mm plug-in stakes PLATFORM * Extendable platform, approx. 11,000 mm long, rear tapered approx. 500 mm x 10° * Pneumatic locking with conical lock bolts and reinforced lock positions; supply lines protected within the extendable rails and automatically adjust to the platform length * BPW axles and suspension, 1st axle steered ahead, 2nd axle fixed, all other axles hydraulic-mechanical forced steering * 1st axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with raise/lower valve * Tires: 235/75 R 17.5 3PMSF twin tires * Mechanical landing gear with two-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Platform with continuous and between the axles interrupted approx. 50 mm thick hardwood flooring (increases friction coefficient) * Long holes for attachable and repositionable bridging elements: – at the fixed section behind the gooseneck – at the front of the platform * 1 sliding intermediate platform, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate floor, front and rear with long holes for attachable and movable bridging elements * 1 pair of recessed flat lashing rings in the fixed front platform section (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the platform, folding outward (LC 10,000 daN) * 1 pair of mechanical rear supports * Steering from front and rear operated via cable remote control, with single-track alignment of the axles, without installation in the tractor * 1st axle with automatic lift-axle function and starting aid in accordance with EU regulation 2021/535 * Under the gooseneck and at the rear cross-member, left and right, each with a 7-pin socket and holder for warning plates * Painted sand coating on the outer frame of the platform as well as on the checker plates and the transition area between the platf

Stav: nový, maximálna hmotnosť nákladu: 73 540 kg, celková hmotnosť: 102 000 kg, konfigurácia náprav: 3 nápravy, Výbava: ABS, Our complete inventory of immediately and short-term available vehicles can be found on our website. Excerpt from the equipment. Full specification upon request. Gooseneck: * Gooseneck hydraulically liftable/lowerable and detachable, length approx. 3,650 mm * 2 pairs of outward-folding lashing rings (LC 5,000 daN) * 2 pairs of lashing rings on the gooseneck (LC 10,600 daN) * 1 pair of lashing rings in the gooseneck center section (LC 10,600 daN) * For 6x4 or 8x4 2-axle tractor units Compact front running gear: * Hook coupling front and rear, length: approx. 2,200 mm * Running gear width: approx. 2,850 mm Excavator deck: Telescopic excavator deck with drive-over deck hooks at the front and pin-lug coupling at the rear * Base width: approx. 2,850 mm * Length: approx. 6,650 mm * Main beam height: approx. 400 mm * Main beam width: approx. 1,350 mm * Loading height approx. 550 mm with ground clearance of approx. 150 mm 4-axle rear running gear: * Mechanical pin-lug coupling for front attachment of a lowbed * Rear cross member; running gear width: approx. 2,850 mm * Running gear length: approx. 5,480 mm Pendulum axles, all axles hydro-mechanically forced-steered * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation Tyres: * Front running gear: 8 x manufacturer’s choice (M+S) 285/70 R19.5 * Rear running gear tyres: 16 x manufacturer’s choice (M+S) 285/70 R19.5 * Load index 150/148J Paintwork: * Full steel construction is automatically shot-blasted with a turbine machine after welding. Second sandblasting with corundum for optimal coating adhesion * HRM-metallized chassis using ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection * Final coating with 2 layers 2K topcoat, solid colour RAL 3002 carmine red, according to RAL system 841GL Including the following accessories: * Steel front wall, approx. 400 mm high * Detachable aluminium side and rear walls on gooseneck, approx. 400 mm high, anodized finish * 3.5 inch king pin * Truck hydraulic connection with flow controller (20 l/min) * Overhead bar for supply line suspension, tractor unit tank must be at least 80 l * With MAX Trailer coupling adapters; otherwise, adapters to be supplied ex works by customer * BEKA-MAX central lubrication for gooseneck, NLGI-2 standard grease * Tool kit, Art. No. 612452 * Multi-coupling hydraulic connectors on gooseneck * Front running gear with separate air connection for pneumatic tools * BEKA-MAX central lubrication for a 2-axle running gear, NLGI-2 standard grease * One 7-pin socket left and right on the rear front running gear for warning panels * Threaded insertion points (ø approx. 40 mm) every 500 mm on the outer upper belt of the excavator deck tube for bolted rings (LC 16,000 daN) * Folding extensions with steel inserts, width adjustable from approx. 2,850 mm to approx. 3,250 mm * BEKA-MAX central lubrication for a 4-axle running gear, NLGI-2 standard grease Bedexbmplepfx Advslg * Socket at rear running gear for cable remote control of steering * Rear running gear with trough * Two INOX tool boxes, approx. 855 x 340 x 390 mm, fitted on the gooseneck, left and right * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery * Radio remote control: * Controls power pack, start/stop diesel engine * Controls steering, in addition to the cable remote control * One LED work light left and right on the rear panel of the gooseneck with separ...

Stav: použitý, maximálna hmotnosť nákladu: 51 870 kg, celková hmotnosť: 65 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 03/2025, ďalšia kontrola (TÜV): 03/2026, celková šírka: 2 540 mm, Výbava: ABS, You can find our entire range of vehicles, including models available immediately or on short notice, on our website. Excerpt from the equipment. Complete specification available on request. GOOSENECK • Gooseneck in SNT design for optimized load deck length, approx. 3,700 mm long, rear with chamfer approx. 1,000 mm x 10° • For tractor units: 4 x 2, 6 x 2 and 6 x 4 • Plug-in steel front wall, approx. 400 mm high • Yellow-red air couplings on the front connector rail • ASPÖCK-UNIBOX at the front connector rail with 24N, 24S & 15-pin sockets • 3 kW electro-hydraulic unit for controlling the hydraulic functions • External beams of gooseneck with mounting holes for bolted lashing rings • One mounting hole at the upper rear section of the gooseneck’s external beams for a bolted lashing ring • 1 pair of screw-in lashing rings included (LC 10,000 daN) • 1 pair of plug-in aluminium side walls, approx. 400 mm high, anodized, on the gooseneck • 1 plug-in aluminium rear wall, approx. 400 mm high, anodized, on the gooseneck • Approx. 40 mm hardwood decking on the gooseneck • 2-inch king pin • Gooseneck guide plate for the fifth wheel, approx. 500 mm wide • Mount at the rear section of the gooseneck for aluminium loading ramps • Round NATO socket at the front connector rail (Maeler & Kaege VG 96 917) LOADING DECK • Extendable loading deck, length approx. 8,800 mm, rear chamfer approx. 500 mm x 10° • Recess in the loading deck as well as in the chamfered area for accommodating an excavator dipper stick approx. 2,490 x 750 x 210/290 mm (L x W x H) • TPMS tyre pressure monitoring system according to ECE R 141 • BPW axles and suspension • 1st and 2nd axle rigid, 3rd and 4th axle self-steering • 3rd and 4th axle with electromagnetic reversing lock, can be activated via reverse gear and manually • Technical axle load rating: 12,000 kg each • Air suspension with lifting and lowering valve • 235/75 R 17.5 twin tyres, 3PMSF • Mechanical landing gear with 2-speed gearbox and crank, JOST Modul B - static test load = approx. 50,000 kg • Continuous hardwood decking (approx. 50 mm) on the loading deck and interrupted between axles (increases coefficient of friction) • Loading deck locked with tapered welded locking profiles every approx. 250 mm • Long holes for attachable and repositionable bridging elements at the front of the loading deck • Intermediate platform with stepped loading deck, approx. 300 mm wide, for extraction tube with large cross-section, with steel covering – front and rear with long holes for attachable and repositionable bridging elements – removable cover flush with the loading deck • 1 pair of lashing rings on the front crossmember (LC 10,000 daN) • 6 pairs of recessed lashing rings in the outer frame of the loading deck, foldable outward (LC 10,000 daN) Bsdpextc Uhefx Advjlg • Additionally, 1 pair of lashing rings externally on the front crossmember of the loading deck, approx. 90° rotated inward towards the loading deck (LC 10,000 daN) • Extendable bolted steel extensions (galvanized), approx. 230 mm per side • 1 pair of fixed open wheel recesses up to extension, approx. 700 x 410 mm (W x D), in the loading deck ahead of the 1st axle; wheel recesses with steel covering and square climbing bars approx. 15 x 15 mm, every approx. 200 mm • Between 2nd and 3rd axles in the loading deck, 1 pair of fixed wheel recesses, approx. 1,695 x 700 x 410 mm (L x W x D); covers for wheel recesses split longitudinally, with wooden top, outer with plug-in locking...

Stav: použitý, konfigurácia náprav: 3 nápravy, prvá registrácia: 05/2008, * Výsuvný * Riadená náprava za jazdy * Hydraulické nakladacie rampy * Vzduchové odpruženie -----Interné číslo vozidla: 11555----Chyby a medzipredaj vyhradený Bedsx I Uyhepfx Advelg WhatsApp podpora k dispozícii! V prípade otázok o vozidle alebo pre ďalšie informácie nás neváhajte kontaktovať cez WhatsApp WhatsApp Nemecky, Anglicky -- WhatsApp Nemecky, Anglicky, Arabsky

Stav: použitý, pohotovostná hmotnosť: 10 900 kg, maximálna hmotnosť nákladu: 43 600 kg, celková hmotnosť: 54 500 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 04/2025, dĺžka ložného priestoru: 8 700 mm, šírka ložného priestoru: 2 550 mm, výška ložného priestoru: 855 mm, veľkosť pneumatiky: 245/70 r17.5, farba: sivý, Rok výroby: 2025, prevádzková hmotnosť: 10 900 kg, Výbava: ABS, Gooseneck, rigid, in central tube design: - Enclosed outer frame with cutouts for lashing straps (LC 1,500 daN) - Steel flooring with anti-slip coating - Including perforated rail for aluminum approach ramps - 2" king pin - Mechanically operated BPW landing gear Bedpsi Ai E Rsfx Advolg - 550 mm long, 8° bevel at the rear end of the gooseneck - Front bulkhead including stowage position for rear wall, 400 mm high - Spare wheel holder mounted upright at the front of the gooseneck - 3 pairs of recessed lashing rings LC 5,000 daN on the gooseneck deck - Aluminum drop-in sideboards, 400 mm high, consisting of 2x sideboards (length 3,150 mm) and rear board with stanchions (galvanized) - Rectangular storage box, aluminum, with folding lid and lockable, approx. 400 x 800 mm, centrally mounted - Storage box 45’, aluminum, with folding lid and lockable, approx. 400 x 800 mm, left side - Storage box 45’, aluminum, with folding lid and lockable, approx. 400 x 800 mm, right side Load platform, single telescoping: - Enclosed outer frame with cutouts for lashing straps (LC 1,500 daN) - Fixed section at front 700 mm - Steel tread plate with anti-slip coating - Beveled transition between fixed section and load platform for attaching bridging rails and wheel recesses - Excavator recess including elongated holes for load securing (LC 1,500 daN), approx. 3,850 mm long - Prepared for hydraulic ramp (electric supply fitted) - Beams for extension to 3,000 mm width - Beveled vehicle rear, 8°, 550 mm long - Sled-type design for easy mounting and removal of ramps - Continuous rear mudflap - 1 pair of lashing points LC 10,000 daN centrally on the platform behind the gooseneck - 7 pairs of lashing points LC 10,000 daN on outer frame of the platform - 6 pairs of stake pockets 100 x 50 mm on the outer frame of the platform - 1 pair of lashing points LC 10,000 daN centrally at the rear of the platform - 1 pair of stake pocket rails approx. in the middle of the platform - 1 pair of stake pocket rails on the fixed section - 1 pair of stake pocket rails behind the last axle Ramps: - Hydraulic twin-fold ramps, 2,750+1,500x800 mm - Larch timber decking - Operated via remote control (either wired or wireless) - Ramps with quick-change (removal system) Chassis: - BPW ECO Max axle make - 2 ride heights - 4 axles, each 10 t (technically 12 t) - Twin tires 245/70 R17.5 - 2 rigid axles and 2 friction-steered axles - Reverse steering lock for friction-steered axles via reverse gear - Brake system make Knorr (in accordance with EU directives with EBS-E) - TIM G2 by Knorr (Trailer Information Module) - RSS (Roll Stability Support) - Load-dependent lift axle on the first axle including starting aid (forced lowering of lift axle via TIM possible) Accessories: - 4 wheel chocks with holder - 2 pairs of warning boards 423 mm x 423 mm, with 2 marker lights and mounting position for beacon, continuously adjustable up to 3,950 mm - Mounting options on gooseneck and platform (alternatively on ramp, if present) are included - Insertable bulkhead at the end of the excavator recess - Electro-hydraulic unit for ramp operation - Wireless remote control for ramp operation - Hydraulic stabilizer legs at vehicle rear for support during loading - 1 pair of additional reversing lights at the rear, activated with reverse gear - Larch wood extension beams (option)

Stav: nový, pohotovostná hmotnosť: 9 300 kg, maximálna hmotnosť nákladu: 30 100 kg, celková hmotnosť: 39 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 8 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R17.5, Výbava: ABS, Gooseneck: - Gooseneck with rear bevel of approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Extendable loading platform: - Loading platform in extendable design with rear bevel of approx. 1,000 mm x 8° - 5 pairs of foldable external lashing rings (LC 5,000 daN) - 3 pairs of foldable external lashing rings (LC 10,000 daN) - 1 pair of flat lashing rings at the front of the loading platform (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, checker plate covering over the axles Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and tyres: - BPW axles, hydro-mechanically forced-steered - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Axle tools - TPMS tyre pressure monitoring system according to ECE R 141 - Tyres 235/75 R17.5 3PMSF Accessories included: - 2" king pin Blodpfx Adoyxc Eyovjg - One galvanised steel front bulkhead, approx. 400 mm high - Yellow-red air couplings on galvanised supply line at the front - 2 wheel chocks with holder at the front bulkhead - One spare wheel with holder in front of the front bulkhead - Electro-hydraulic power unit - Steering override, operated from front and rear via cable remote control with push buttons, with single-track axle control - European reflector boards (red-yellow) at the rear of the trailer - White reflective tape according to EU regulations on the sides and on the extension, red at the rear - On the gooseneck and at the rear, left and right, each a bracket for warning signs, including socket - Sliding bracket for aluminium approach ramps at the rear of the vehicle - Bracket for a rotating beacon at the rear of the trailer - Galvanised folding supports beneath the rear bevel of the loading platform - One mud flap at the rear of the trailer - Manual and documentation on USB stick - BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and removable protection for the pump - On the gooseneck, plug-in aluminium side and rear walls approx. 2,440 x 400 mm - The rear galvanised plug-in stanchions are removable (body length: approx. 2,560 mm) - 3 pairs of WADER container pockets in the loading platform for 1x 20ft, 1x 30ft or 1x 40ft container - 6 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the loading platform - INOX toolbox 1,500 x 390 x 810 under the loading platform on the right (in direction of travel) - Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm with a position light - Bracket for rotating beacon mounted on the warning signs - Radio remote control for steering override, in addition to cable remote control, with indicator lights on the receiver for single-track control - Anti-slip sand coating painted onto the checker plates on the gooseneck and on the loading platform - 80 km/h speed stickers at the rear and both sides - Load gauge to determine axle loads, including load diagram

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, pohotovostná hmotnosť: 15 900 kg, maximálna hmotnosť nákladu: 42 100 kg, celková hmotnosť: 58 000 kg, konfigurácia náprav: 3 nápravy, povolené zaťaženie nápravy (náprava 1): 10 000 kg, dovolené zaťaženie nápravy (náprava 2): 10 000 kg, povolené zaťaženie nápravy (náprava 3): 10 000 kg, prvá registrácia: 11/2001, dĺžka ložného priestoru: 8 960 mm, šírka ložného priestoru: 2 520 mm, celková dĺžka: 12 950 mm, celková šírka: 2 520 mm, celková výška: 3 800 mm, zavesenie: hydraulika, veľkosť pneumatiky: 245/70R17,5, rázvor náprav: 1 360 mm, maximálna rýchlosť: 90 km/h, farba: modrá, brzda prívesu: príves s brzdou, Rok výroby: 2001, Výbava: ABS, Nooteboom MCO-73-04V TOP trailer from first owner, first registration 21.11.2001, Overhauled in 2014, Brakes NEW as of 12/2025! 66,000 kg gross train weight with 3-axle tractor unit, Gross weight 58,000 kg, Kingpin load 18,000 kg, axles 1–4: 10,000/10,000/10,000/10,000 kg Unladen weight 15,900 kg, For exact dimensions, please refer to the technical data sheet. Lowbed 8.96 m + 5.50 m extension (telescopic), Hydraulic supports at front and rear allow the entire trailer plus 30 t load to be lifted easily; ideal for side unloading from loading ramps, Hydraulic suspension (also enables leveling for uneven load distribution), 1st axle liftable, 4 steerable axles, either automatic or remote-controlled as desired (including counter-steer), Hydraulic ramps + hydraulically extendable to 3,000 mm, Loading platform extendable to 3,000 mm, Tyres 245/70R17.5 1A=6/6/6/6 mm, 2A=11/11/8/8 mm, 3A=9/9/7/7 mm, 4A=11/11/7/5 mm, spare wheel 6 mm, Further details on request. Sale only to businesses or for export. Leasing / Financing available on request – instant processing, even without down-payment! More information and conditions on request. The vehicle description serves solely for general identification of the vehicle. Information, images, and descriptions are provided without guarantee! Equipment must be checked separately if necessary. The seller accepts no liability for possible typographical or data transmission errors. Subject to error and prior sale. Thank you for your interest! We look forward to your visit. OUR SERVICE We are happy to take your used equipment in part-exchange, 30-day export license plate incl. insurance, Bljdpeyqm I Uofx Advog EUR-1 + all customs documents for export, TÜV / technical inspection / accident prevention test / tachograph check / OBU installation, Professional delivery to customer, Airport Stuttgart / Sindelfingen train station pick-up by arrangement, Retrofitting of additional accessories as well as other individual customer requests possible upon consultation.

Stav: nový, pohotovostná hmotnosť: 12 000 kg, maximálna hmotnosť nákladu: 54 000 kg, celková hmotnosť: 66 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 245/70 R 17.5, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable loading platform design: - Extendable loading platform with rear chamfer approx. 1,000 mm x 8° - 5 pairs of fold-out lashing rings (LC 5,000 daN) - 3 pairs of fold-out lashing rings (LC 10,000 daN) - 1 pair of recessed lashing rings in the front loading area (LC 10,000 daN) - Cut-outs in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) - Hardwood flooring approx. 48 mm thick, over the axles with tread plate covering Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox, 24 t lifting capacity (50 t test load) Bodpfxsykpbkj Advolg Brake system: - WABCO braking system compliant with EU regulations with EBS-E (4S3M) Steel structure: - Steel structure made from high-strength fine-grained steels Axles and tyres: - BPW axles and suspension, 1st axle rigid, all other axles hydro-mechanically forced-steered - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Axle tool - TPMS tyre pressure monitoring system in accordance with ECE R 141 - Tyres 245/70 R 17.5 3PMSF Accessories included: - 2" king pin - Galvanised steel front wall approx. 400 mm high - At the galvanised front connection plate: yellow-red air couplings - 4 wheel chocks with holder on the front wall - 1 spare wheel with holder in front of the front wall - Electro-hydraulic power unit - Forced steering, front and rear, operated via cable remote control with push buttons, with tracking control for the axles - European reflector plates (red-yellow) at the rear of the trailer - White reflective tape on the sides and the extension, red at the rear, in accordance with EU regulations - On gooseneck and rear left and right: holder for warning boards including socket - Galvanised, extendable width extensions, ca. 230 mm per side - Holder for beacon at the rear of the trailer - Galvanised folding supports under the rear chamfer of the loading platform - Mudflap at the rear - Operating manual and description on USB stick - Central lubrication system BEKAMAX (Pico) with standard lubrication grease NLGI-2 and removable guard around the pump - Plug-in ALU side boards and rear board on the gooseneck approx. 2,440 x 400 mm - Rear galvanised stakes are removable (body length approx. 2,560 mm) - INOX toolbox 1,350x400x400 on the gooseneck (note: box covers oil filler cap) - 4 pairs of WADER container pockets in the loading area for 1x 20ft, 2x 20ft, 1x 40ft, or 1x 45ft container - 7 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area - Sliding hook-in crossbar for ALU drive-on ramps at the rear - Square climbing bars 20 x 20 mm every 200 mm on the outside frame of the rear chamfer - Lift axle on the front axle with control via TEBS-E depending on axle load and current loading condition - Four warning boards extendable by approx. 400 mm, approx. 423 x 423 mm with a position light - Holder for beacon on the warning boards - Radio remote control for forced steering, in addition to cable remote, with indicator lights on receiver as single-track control - Non-slip sand coating painted onto tread plates on gooseneck and loading area - Speed stickers 80 km/h at the rear and on both sides - Load gauge for determining axle loads, including load diagram

Stav: nový, pohotovostná hmotnosť: 27 000 kg, maximálna hmotnosť nákladu: 72 500 kg, celková hmotnosť: 99 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 5 500 mm, šírka ložného priestoru: 2 750 mm, výška ložného priestoru: 550 mm, zavesenie: iný, veľkosť pneumatiky: 245/70 r 17,5, farba: sivý, Výbava: ABS, Removable gooseneck: Loading area 3,750 mm x 2,480 mm Technical fifth-wheel load up to max. 30,000 kg Hydromechanical steering Hydraulic lift and lower function 2 support cylinders Hydraulic function controls on the left side (driving direction) Access ladder to the gooseneck Hydraulic claw locking for deck or chassis Multi-function quick coupling Lighting for gooseneck control elements under the fold-down protection cover 3.5" king pin 2-axle front running gear: 4 wheels per axle line, ball-race mounted pendulum axle units Axle make: Gigant Chassis width 2,750 mm / Wheelbase 1,510 mm Hydraulic axle compensation, lift 600 mm Ride height: 1,145 mm +340 mm/-260 mm Steel floor cover Brake system, 2-axle front running gear: Drum brakes, all-wheel air brake system Automatic load-dependent brake (ALB) (AGS) Parking brake via spring-loaded cylinders EBS / ABS (Electronic Brake System) Socket for EBS at the front of the gooseneck Duomatic coupling for brake connection between chassis and loading area Excavator deck 5,500 mm to 10,000 mm: Box-type inner/outer tube External tube height 400 mm Loading height 550 mm, ground clearance 150 mm Outer tube prepared for folding extension fittings 4-axle rear running gear: 4 wheels per axle line, ball-race mounted pendulum axle units Axle make: Gigant Chassis width 2,750 mm / Wheelbase 1,510 mm Hydraulic axle compensation, lift 600 mm Ride height: 1,100 mm +385 mm/-215 mm Steel floor cover Combined excavator trough Brake system, 4-axle rear running gear: Drum brake with automatic load-dependent brake (ALB) (AGS) Dual-circuit, all-wheel air brake system Parking brake via spring-loaded cylinders EBS / ABS (Electronic Brake System) Vehicle rear: Standard design 90°, 580 mm rear overhang from the center of the last axle No ramp attachments on the end cross-member Hydraulics: Hydraulic connections for tractor unit (1 set), connections for tractor (without lines), pump in tractor unit with maximum flow rate of 60 l/min, additional flow divider for tractor units up to 120 l/min. 6-way ball valve in gooseneck for zero-pressure switching of the gooseneck articulation Hydraulic unit with Hatz diesel engine, 10 kW, noise-dampened, hydraulic pump output 12 l/min, incl. electric starter and manual throttle, mounted on the side of the gooseneck. Standard paint finish in DB7350 nova grey, weight approx. 460 kg. Accessories included: Spare wheel holder on gooseneck deck with mounted spare wheel 2 pairs of wheel chocks Aluminum drop sides, 3-sided closed (with rear wall), 400 mm high, stakes (foldable and removable) Goldhofer "Premium" storage box, mounted at the front end of the gooseneck, corners chamfered at 45°, dimensions approx. 550 x 400 x 2,540 mm, with side doors and front-hinged rectangular lid, doors and lid lockable, inside with 2 removable divider panels. 2 pairs of warning panels, 423 x 423 mm, with 3 LED position lights, incl. slip-on tube for rotating beacon, warning panel holder extendable to max. 4,200 mm. Additional warning panel holder mounted on the front running gear LED rotating beacon (2 pcs), pluggable, light switched via parking light Central lubrication system, "Progressive" type for standard grease, with 3 pumps 2 pairs of lashing points M36, bolted, LC=16,000 daN, loose 1 sign "Convoi Exceptionnel" Bodpfohlz Rnex Advslg 1 set of approach ramps in aluminum design for front driving onto the excavator deck, 2-piece, with climbing strips

Stav: nový, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, celková šírka: 2 530 mm, Rok výroby: 2025, Výbava: ABS, 2-axle self-steering trailer type M2K-9L * COMPACT steering system * Corrosion resistance through powder coating * All attachments bolted * Conventional wiring * Brackets and attachments in stainless steel or galvanized * 2 single axles, BPW, 10 t with disc brakes, including safety cables * Air suspension * Aluminum air tank * Bolster model IX with 1x mechanically telescoping stakes * Tires 275/70 R 22.5 on steel rims * EBS braking system * LED tail lights with integrated triangle reflector * 4x LED work lights (1,800 lumen) * Manual central lubrication * Paint: RAL 9011 graphite black * Payload approx. 14,550 kg 2-axle self-steering trailer type M2K-10B * Differences compared to the M2K-9L: * Leaf spring suspension * 2 single axles, BPW, 12 t with drum brakes, including safety cables * Bolster model IX with 1x hydraulically telescoping stakes * Tires 315/80 R 22.5 on steel rims * Electric central lubrication * Payload approx. 14,100 kg 2-axle self-steering trailer type M2K-10L * Differences compared to the M2K-9L: * 2 single axles, BPW, 12 t with drum brakes, including safety cables * Bolster model IX with 1x hydraulically telescoping stakes * Tires 315/80 R 22.5 on steel rims * Electric central lubrication * Payload approx. 14,100 kg 2-axle self-steering trailer type M2R-10L Differences compared to the M2K-9L: * Ratio steering system (4-cylinder) * 2 single axles, BPW, 12 t with drum brakes, including safety cables * Bolster model IX with 1x hydraulically telescoping stakes * Tires 315/80 R 22.5 on steel rims Bedpegqc Hbsfx Advelg * Electric central lubrication * Payload approx. 13,965 kg Various additional equipment available. Further information on request. Illustrations may differ from the original. All information without guarantee. Contact: Niclas Lott Tel.: