Faymonville Max Trailer 2-Achs-Tiefbett Mit Pendelachsen kúpiť použité (58 344)

Stav: nový, pohotovostná hmotnosť: 12 900 kg, maximálna hmotnosť nákladu: 34 100 kg, celková hmotnosť: 47 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 850 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 350 mm, zavesenie: iný, veľkosť pneumatiky: 245/70 R 17,5, farba: sivý, prevádzková hmotnosť: 12 900 kg, Výbava: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading platform length, approx. 3,750 mm - Gooseneck hydraulically liftable/lowerable and removable - Technical fifth wheel load: 23,000 kg - Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4 Loading Platform: - Low bed with external beams, extendable “SUPER LOW” design, approx. 6,850 mm long - Low bed with fixed hardwood floor approx. 40 mm thick and mechanical locking Rear Chassis: - Rear chassis with closed outer frame, chequer plate covering, and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear - 2 pairs of lashing rings foldable outwards - 1 pair of lashing rings mounted flat in the trough - 2 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame Pendulum Axle and Tyres: - “PENDEL-AXLE”, all axles hydromechanically forced-steered - Burst protection valve on the axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pre-inserts for securing in raised position - Axles finished with two layers of single-colour 2K paint in "FAY-Grey-34-0260" - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres 245/70 R 17.5 - TPMS tyre pressure monitoring system according to ECE R 141 Accessories: - Prepared for mounting bolt-on container locks for 1x 20ft or 1x 40ft container on the outer beams - 2" kingpin - Galvanised steel front wall, approx. 400 mm high - One spare wheel - At the galvanised connection rail front, yellow-red air couplings - 4 wheel chocks - Forced steering from front and rear controlled via cable remote control with push buttons, includes single-track monitoring of axles - Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings - Electro-hydraulic power pack - White reflective tape on the sides, the extension, and the rear in accordance with EU regulations - European reflective panels (red-yellow) at the rear of the trailer - Brackets at the gooseneck and rear panel left/right for warning signs, including socket - 6 pairs of threaded blocks between lashing rings under the top flange on the outer beam for mounting bolt-on RUD VLBG-4 rings - Plug-in ALU sidewalls and rear wall on the gooseneck approx. 2,440 x 400 mm Nodpfohlz R Sex Afmold - The rear galvanised plug-in stakes are removable (body length approx. 2,560 mm) - Gooseneck rear upper area closed with removable cover - 5 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading platform - Folding widening pieces, approx. 230 mm per side - 2 pairs of bolt-on RUD VLBG-4 M24 rings (LC 8,000 daN) - 1 pair of steel ramps for bridging the low bed towing hook - On the loading platform, a coated sand layer as anti-slip protection - 80 km/h speed stickers at the rear and both sides - Rear part of the driving gear’s dipper stick trough covered by a plug-in plate - Four retractable warning boards approx. 423 x 423 mm, extendable by approx. 400 mm - Radio remote control for forced steering, in addition to cable control, with indicator lights on the receiver for axle single-track monitoring - Central lubrication system with 2 BEKAMAX (Pico) pumps using standard NLGI-2 grease - Load gauge for determining axle loads - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible surfaces are metallized with ZINACOR 850 (zinc 85% - alu 15%) and hot-finished

Stav: nový, pohotovostná hmotnosť: 17 500 kg, maximálna hmotnosť nákladu: 43 500 kg, celková hmotnosť: 61 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 7 550 mm, šírka ložného priestoru: 2 750 mm, výška ložného priestoru: 400 mm, veľkosť pneumatiky: 245/70 R 17.5, farba: sivý, Výbava: ABS, Neck (Gooseneck): - Gooseneck in SNT design for optimizing loading platform length, approx. 3,750 mm long - Gooseneck hydraulically liftable/lowerable and detachable - For tractor units: 6x4 or 8x4 Deck (Lowbed): - Lowbed with external beams, extendable design, "SUPER LOW" type, approx. 7,550 mm long - Lowbed with fixed hardwood floor, approx. 40 mm thick, with mechanical locking - Service lines protected and routed within the extendable beams, automatically adjusting to the respective lowbed length Rear chassis: - Rear chassis with closed outer frame, checker plate surface, and continuous prism excavator trough, approx. 1,450/900 x 505 mm, open at the rear - 2 pairs of stake pockets (100 x 50 mm) on the outer frame for plug-in stakes Axles and tires: - "PENDULUM AXLE", all axles forced-steered hydromechanically - Burst pipe valve to axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and plug pin for securing in raised position - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tires 245/70 R 17.5 / 3PMSF Accessories included: - Prepared for mounted container locks for 1x 20ft or 1x 40ft container on outer beams - 2" king pin - One galvanized steel front wall, approx. 400 mm high - One spare wheel with holder - Yellow-red air couplings on the galvanized front connector strip - 4 wheel chocks - Remote steering front and rear operated by wire remote control via pushbuttons, with single-track axle alignment control - Hydraulic couplings between gooseneck and lowbed as multi-coupling instead of screw type - Electro-hydraulic power pack - White reflective tape as per EU regulations on the sides, at the extension and red on the rear - 2 wooden blocks 500x250x200 mm - European reflective warning panels (red-yellow) at trailer rear - On gooseneck and rear section: holders for warning signs with sockets left and right - Central lubrication system with 2 BEKAMAX (Pico) pumps, standard grease NLGI-2 Nlodpfx Afeh Hm Thjmod - Load gauge to determine axle loads, incl. load chart - On gooseneck, plug-in aluminum side walls and rear wall approx. 2,000 x 400 mm - Rear galvanized plug-in stakes removable (body length approx. 2,120 mm) - Separate air connection with air gun on the gooseneck - Duomatic air coupling from gooseneck to lowbed - Gooseneck closed at rear upper section with removable cover - 1 pair of steel ramps for bridging the lowbed receptacle hooks - Four approx. 400 mm extendable warning signs, approx. 423 x 423 mm - Radio remote control for rear steering in addition to cable remote, with receiver indicator lights for single-track alignment - 6 pairs threaded blocks between lashing rings under top chord on outer beam for installation of screwable RUD rings VLBG-4 - 7 pairs of stake pockets (100 x 50 mm) in outer frame of load platform - Folding extensions, approx. 230 mm per side - Anti-slip sand coating painted on load platform - Dipper stick trough at front and rear of rear chassis closed with plug-in plates - HRM Metallization (High Resistance Metallization) of the outer frame - Complete steel construction shot-blasted, then defined visible surfaces metallized with ZINACOR 850 (Zinc 85% - Alu 15%) by hot finishing

Stav: použitý, pohotovostná hmotnosť: 29 600 kg, maximálna hmotnosť nákladu: 72 400 kg, celková hmotnosť: 102 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 08/2025, dĺžka ložného priestoru: 6 650 mm, šírka ložného priestoru: 2 840 mm, výška ložného priestoru: 550 mm, veľkosť pneumatiky: 285/70 R19.5, farba: sivý, Rok výroby: 2025, Výbava: ABS, Gooseneck: - Gooseneck hydraulically liftable/lowerable and detachable - Length approx. 3,650 mm - For tractor units: 6 x 4 or 8 x 4 2-axle front running gear: - Hook coupling front and rear - Chassis length x chassis width approx. 2,200 mm x 2,850 mm “TBB-A” Excavator Deck: Nedpfx Aezauvrsfmeld - Telescopic excavator deck “BB-A” with drive-over bridge hooks at the front and bolt-eye coupling at the rear - Length x base width approx. 6,650 mm x 2,850 mm - Beam height x beam width approx. 400 mm x 1,350 mm - Loading height 550 mm with ground clearance of 150 mm 4-axle rear running gear: - Mechanical bolt-eye coupling at the front for fitting a low bed, end cross member at the rear - Chassis length x chassis width approx. 5,480 mm x 2,850 mm Pendulum axles and tyres (front and rear running gear): - "PENDULUM AXLE", all axles hydromechanically forced steered - Hose rupture valve on the axle compensation cylinder with automatic reset function - Hydraulic cylinder with shut-off valves and pre-fit plug to secure in raised position - Final painting of axles with 2 layers of single-colour MB 7350 Novagrau 2K paint - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres 285/70 R19.5 Rear steering: - Rear steering operable from the front and rear via cable remote control with push buttons, including single-track control of axles - Socket for controlling the rear steering on the gooseneck - Cable remote control with push buttons including single-track control of axles Accessories included: - Yellow-red air couplings on the galvanized front coupling bar - Steel front wall approx. 400 mm high - 4 wheel chocks - 3.5" king pin - One 7-pin socket left and right at the rear of the gooseneck for the warning sign - Crane with winch for spare wheel on the front panel of the gooseneck - Truck hydraulic connection with flow limiter (40 l/min), including crane for suspension of supply lines, tractor unit tank must hold at least 80 litres with couplings - Plug-in ALU side and tail walls approx. 400 mm high, anodized, on the gooseneck - Control levers on the gooseneck protected by a foldable cover - Separate air connection with air gun on the gooseneck - Central lubrication system BEKAMAX with standard grease NLGI-2, 1x at the gooseneck, 1x at the 2-axle chassis, and 1x at the 4-axle chassis - Variomax tool kit - Multi-coupling hydraulic connections on the gooseneck and in the area of the low bed hook coupling - 2 spare wheels - Front chassis with separate air connection for air wrench - Foldable extensions with steel deck slabs, width adjustable from approx. 2,850 mm to approx. 3,250 mm - Steel deck slabs can be inserted in 2 positions to achieve a lowered loading platform - Steel deck slabs with rubber floor covering approx. 12 mm thick - Threaded hole option (⌀ 40 mm) every approx. 500 mm outside on the upper chord of the external excavator deck tube for screw-in rings - 2 stainless steel toolboxes (INOX) approx. 855 x 340 x 390 mm left + right on the gooseneck - Radio remote control for the rear steering in addition to the cable remote control - 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery - Steel deck slabs adjustable from 2,850 mm to 3,250 mm wide and insertable in 2 positions for a lowered loading platform - 4 pairs of steel deck slabs with approx. 12 mm thick rubber floor covering - Maximum 3,500 mm extendable beam can be covered, in steps of 500 mm - Central carrier of the low bed provided with a painted sand la

Stav: nový, pohotovostná hmotnosť: 15 420 kg, maximálna hmotnosť nákladu: 61 080 kg, celková hmotnosť: 76 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 900 mm, veľkosť pneumatiky: 235/75/r17,5, farba: sivý, Výbava: ABS, Gooseneck: Gooseneck with rear bevel of approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading Area: Extendable loading area with rear bevel of approx. 500 mm x 8° 8 pairs of folding outward lashing rings 1 pair of flat lashing rings at the front of the loading area Nodel Sl Izepfx Afmeld Cutouts in the outer frame of the loading area for securing load straps Approx. 48 mm thick hardwood flooring, non-slip checker plate cover above the axles Two-piece Steel Ramps: One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering. Ramp parts are hydraulically foldable, equipped with hydraulic lifting mechanism and hydraulic lateral adjustment. Maximum load per pair: 50,000 kg. Landing Legs: • JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: BPW axles and suspension, 4th and 5th axle steering Technical axle load: 12,000 kg 4th and 5th axles with electromagnetic reverse lock activated via reverse gear and manual operation Tyres 235/75 R 17.5 3PMSF Braking System: Braking system according to EU regulations with EBS-E (4S3M) Sockets and Lighting: Electrical system according to EU regulations, 24-volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets Connections according to ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paintwork: First-class and durable corrosion protection, achieved by standard shot-blasted welded frame with a 2-component (2K) zinc dust primer High-quality single color 2-component (2K) topcoat in MB 7350 Novagrau Rear section metallized and painted in RAL 9010 (Pure White) Metallic lacquer not available Steel Structure: Steel construction made from high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Accessories: One spare wheel with bracket in front of the bulkhead 2" kingpin Galvanized steel front wall approx. 400 mm high Yellow-red air couplings on the galvanized front connector strip 2 wheel chocks with holders on the front wall Provision at the rear of the gooseneck for ALU drive-on ramps Bracket for a beacon at the rear of the trailer Galvanized supports under the rear bevel of the loading area White reflector tape according to EU regulations on the sides, at the extension and rear red Electro-hydraulic unit at the rear under the loading area On gooseneck and rear panel (left and right) bracket for warning signs incl. socket Control valves for the ramps installed on the right side of the trailer A mud flap at the rear of the trailer Manual and description on USB stick 3.5" kingpin supplied loose On the gooseneck, plug-in ALU side walls and rear wall approx. 2,440 x 400 mm (LxH) Rear galvanized plug-in stakes are removable (Length of the structure approx. 2,560 mm) 3 pairs of WADER container pockets on the loading area for one 20' (30') or a 40' container 6 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading area Galvanized extensions, extendable by approx. 230 mm per side Lifting axle on the front axle, control via TEBS-E depending on current axle load and loading status Square climb strips 20 x 20 mm, every 200 mm on the outer frame of the loading area bevel On the checker plates, above the kingpin and the loa

Stav: nový, pohotovostná hmotnosť: 13 250 kg, maximálna hmotnosť nákladu: 47 550 kg, celková hmotnosť: 60 800 kg, konfigurácia náprav: 3 nápravy, zavesenie: vzduch, veľkosť pneumatiky: 245/70 r17.5, farba: sivý, Výbava: ABS, Gooseneck: Gooseneck with rear chamfer of approx. 750 mm x 10°. 3 pairs of lashing rings 30 mm thick hardwood flooring Extendable loading platform: Extendable loading platform with rear chamfer of approx. 1,000 mm x 8° 5 pairs of hinged lashing rings (can be folded outward) 3 pairs of hinged lashing rings (can be folded outward) 1 pair of horizontal lashing rings at the front of the loading platform Cutouts in the outer frame of the loading platform for hooking in tensioning straps Hardwood floor approx. 48 mm thick, anti-slip checker plate over the axles Two-part steel ramps: One pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood overlay. Ramps with hydraulically extendable and retractable ramp sections, hydraulic lifting device, and hydraulically adjustable. Maximum load capacity per pair: 40,000 kg Landing legs: JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test capacity) Axles and tires: BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanical forced steering Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tools Tires: 245/70 R 17.5 Brake system: Brake system compliant with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit Steel construction: Nodpsl Uxdkofx Afmold Steel construction made of high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Paintwork: Top-quality, durable corrosion protection of the standard shot-blasted welded frame guaranteed by a two-component (2K) zinc-rich primer High-quality single-color 2-component (2K) top coat in Nova Grey Rear section metalized and painted in RAL 9010 (pure white) No metallic paints possible Electrical system: Electrical system according to EU specifications, 24 volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets Connection as per ISO 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Accessories included: 2" kingpin Galvanized steel front wall approx. 400 mm high Yellow-red air couplings on the galvanized connection bar at the front 4 wheel chocks with holder at the front wall One spare wheel with holder in front of the front wall Electro-hydraulic power pack Remote steering from front and rear via cable remote control with push-button operation and single trace axle control Mount at the rear of the gooseneck for ALU loading ramps European reflective panels (red-yellow) at the rear of the trailer White reflective striping according to EU regulations at the side, at the extension element, and rear in red On the gooseneck and ramps left and right, each with one bracket for warning signs including socket A bracket for a revolving beacon at the rear of the trailer Galvanized folding supports under the chamfer of the loading area Control valves for ramps mounted on the right side of the trailer Cover plates for bridging the gap between ramps and loading area One mudflap at the rear of the trailer Manual and documentation on USB stick Central lubrication system BEKAMAX (Pico) with standard NLGI-2 grease and removable pump guard On the gooseneck, removable ALU side boards and rear board approx. 2,440 x 400 mm Rear galvanized removable stanchions, body length approx. 2,560 mm A toolbox INOX 1,350x400x400 on the gooseneck, box covers oil fill 4 pairs of WADER container locks in the loading platform for one

Stav: nový, maximálna hmotnosť nákladu: 38 100 kg, celková hmotnosť: 50 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 100 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 760 mm, zavesenie: vzduch, veľkosť pneumatiky: 205/65 R17.5 3PMSF, farba: sivý, Výbava: ABS, Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading platform: 5 pairs of folding lashing rings on the outside 3 pairs of folding lashing rings on the outside 1 pair of horizontal lashing rings at the front of the loading platform Cutouts in the outer frame of the loading platform for attaching tie-down straps Approx. 48 mm thick hardwood flooring, over the axles with checker plate covering Landing gear: JOST landing legs with 2-speed gearbox for 24 t lifting capacity Axles and tyres: BPW axles, two fixed and two self-steering axles, air suspension, drum brakes, with raise/lower function The self-steering axles can be locked for reversing via electromagnet, activated through reverse gear or manually Axle tools Tyres 205/65 R17.5 3PMSF Braking system: WABCO braking system according to EU regulations with EBS-E Steel construction: High-strength fine grain steel frame Steel grades: S355J2+N/S355MC S690QL/S700MC Electrical equipment: Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets Connection in accordance with ISO Paintwork: Premium, durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component zinc dust primer High-quality 2-component top coat, single color in MB 7350 Novagrau Metallic paint not available Rear section metallized and painted in RAL 9010 Standard equipment included: 1 spare wheel 205/65 R 17.5 TPMS tire pressure monitoring system in accordance with ECE R 141 At the galvanized front connection strip: yellow-red air couplings 4 wheel chocks with brackets on the front wall Mounting at the rear of the gooseneck for ALU loading ramps Galvanized folding supports underneath the sloped section of the loading area One bracket for a rotating beacon at the rear of the trailer Height-adjustable curtain structure Galvanized front wall with a tensioning mechanism for the sliding curtains Adjustable height approx. 400 mm "EDSCHA" brand roof, forward-sliding on ALU roof beam profiles, bolted to front and rear walls 3 pairs of sliding stanchions on the loading area The superstructure can be hydraulically extended at the rear left and right by approx. 750 mm Sliding roof with lift-up portal beam Sliding curtain with 700 mm extra length, with tensioning straps approx. every 600 mm Height to top edge of superstructure approx. 3,960 mm Driving with open sliding roof is not permitted and will cause damage to the curtain Hanger bar for ALU loading ramps at the rear of the vehicle On the gooseneck and on the left and right of the rear panel, each with a bracket for warning signs including socket Mudflap at the rear of the trailer European reflective plates at the rear of the trailer 7 pairs of stake pockets for 100 x 50 mm insertable stakes in the outer frame of the loading platform Lifting axle on the front axle controlled by TEBS E depending on current axle load and loading condition Superstructure at the rear with closed ALU swing doors On the checker plate on the gooseneck and loading area, an integrated sand coating to prevent slipping Central lubrication system BEKAMAX with standard grease NLGI-2 and removable pump guard 80 km/h speed stickers at the rear and on both sides Nlodpfxetphtme Afmod Load gauge for axle load determination including load diagram

Stav: nový, pohotovostná hmotnosť: 34 500 kg, maximálna hmotnosť nákladu: 106 700 kg, celková hmotnosť: 141 200 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 7 150 mm, šírka ložného priestoru: 2 850 mm, výška ložného priestoru: 580 mm, veľkosť pneumatiky: 285/70 R19.5, farba: sivý, prevádzková hmotnosť: 34 500 kg, Výbava: ABS, Gooseneck: - Gooseneck hydraulically liftable/lowerable and detachable - Length approx. 3,650 mm - Extensive lashing positions - For tractor units: 6 x 4 or 8 x 4 3-Axle Compact Front Undercarriage: - Hook mountings at front and rear - Undercarriage length x width approx. 3,560 mm x 2,850 mm - Extensive lashing positions Excavator Deck “BB-A”: - Telescopic excavator deck “BB-A” with drive-over deck hooks at the front and pin-lug coupling at the rear - Length x base width approx. 7,150 mm x 2,850 mm - Beam height x width approx. 430 mm x 1,350 mm - Loading height 580 mm with ground clearance of 150 mm - 5 pairs of hanging lashing rings (LC 10,600 daN) - 4 pairs of M30 threaded blocks on the inner beam for mounting screwable rings 5-Axle Rear Undercarriage: - Mechanical pin-lug coupling at the front for low bed attachment; end cross-member at the rear - Undercarriage length x width approx. 6,840 mm x 2,850 mm - Extensive lashing positions Pendulum Axle and Tyres (front and rear undercarriage): Nlsdpfxswhywfj Afmod - "PENDULUM AXLE", all axles hydro-mechanically forced steered - Hose rupture valve on axle balancing cylinders with automatic RESET function - Hydraulic cylinders fitted with shut-off taps and locking plugs for securing in raised position - Final coating of axles with two layers of 2K paint, single color MB 7350 Novagrau - Technical axle load: 14,640 kg (62 km/h) - Hydraulic axle compensation - Axle tools - Tyres: 285/70 R19.5 Remote Steering (Follow-up Steering): - Remote steering from front and rear operable via cable remote control with push buttons, with axle tracking monitoring - Socket for remote steering operation at the gooseneck - Cable remote control with push buttons including axle tracking monitoring Accessories included: - Yellow-red air couplings on galvanized front connection rail - Steel front wall approx. 400 mm high - 4 wheel chocks with holders - 2 spare wheels 285/70 R19.5 - 3.5" king pin - Boom with winch for spare wheel at gooseneck front - Truck hydraulic connection with flow regulator (40 l/min), including boom for suspending service lines; tractor unit tank must have at least 80 liters capacity with connectors - White reflective tape according to EU regulations on the sides and on the extension, red at the rear - Plug-in ALU side boards and tailgate on the gooseneck, approx. 400 mm high, anodized - Control levers on the gooseneck protected by a foldable cover - Separate air connection with air gun at the gooseneck - Central lubrication system BEKAMAX with standard grease NLGI-2, 1x at the gooseneck, 1x at the 3-axle undercarriage, 1x at the 5-axle undercarriage - Variomax tool kit - Multi-coupling hydraulic connections at low bed hook area - Front undercarriage with separate air connection for pneumatic tools - Threaded insert option (ø 40 mm) every approx. 500 mm on the outer web of the excavator deck for screw rings - Foldable width extensions with steel inlays, adjustable from approx. 2,850 mm to 3,250 mm - Steel inlays with approx. 12 mm thick rubber covering - Two INOX toolboxes 855 x 340 x 390 mm - Radio remote control for steering in addition to cable remote control - Sand layer coating as anti-slip protection - 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery

Stav: použitý, maximálna hmotnosť nákladu: 30 660 kg, celková hmotnosť: 43 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 03/2024, ďalšia kontrola (TÜV): 03/2025, Výbava: ABS, Náš kompletný vozový park, vrátane vozidiel, ktoré sú k dispozícii okamžite a v krátkom čase, nájdete na našej webovej stránke. Výber z výbavy. Kompletná výbava na vyžiadanie. Ložná plocha * Nízky podvoz s centrálnym nosníkom v teleskopickom prevedení * Dĺžka cca 6 750 mm * 5 párov upevňovacích ôk, ktoré sa dajú vyklopiť smerom von (LC 5 000 daN) * 1 pár upevňovacích ôk, ktoré sa dajú vyklopiť smerom von (LC 10 000 daN) * 1 pár upevňovacích ôk umiestnených v hornej časti ložnej plochy vzadu (LC 10 000 daN) * Prívodné vedenia sú chránené v centrálnom nosníku a prispôsobujú sa príslušnej dĺžke nízkeho podvozu Labutia krk * Dĺžka cca 3 900 mm * Labutia krk hydraulicky zdvíhateľná/spúšťateľná a vysúvateľná * Technická nosnosť sedla: 23 000 kg Zadná náprava * Vzadu v kratšom prevedení so zatvoreným vonkajším rámom a krytom z vlnitého plechu * Náprava s násypnou korbou, táto je v zadnej polovici zatvorená na uchytenie vzduchových nádrží Njdpfx Aezm D Ucofmjld * 2 páry upevňovacích ôk, ktoré sa dajú vyklopiť smerom von (LC 5 000 daN) * 1 pár upevňovacích ôk, ktoré sa dajú vyklopiť smerom von (LC 10 000 daN) Nápravy * Nápravy BPW, hydro-mechanicky riadené * Technická nosnosť nápravy: 12 000 kg * Vzduchové pruženie s ventilom na zdvíhanie a spúšťanie * Nástroj na údržbu náprav Pneumatiky * 245/70 R 17.5 3PMSF - značka podľa nášho výberu * Index záťaže (146/146F) Brzdový systém * podľa predpisov EÚ s EBS-E (2S2M) bez spojovacích vedení k ťahaču Oceľová konštrukcia * z vysoko pevných jemnozrnných ocelí * Kvality ocelí: S355J2+N/S355MC (medza klzu 355 MPa), S690QL/S700MC (medza klzu 690 MPa) Náter * Kvalitný 2-komponentný (2K) náter * Vrchný náter jednofarebný v odtieni RAL 3002 karmínovočervená Vrátane nasledujúceho dodatočného vybavenia * 2 palcové kráľovské čapy * Pozinkovaná oceľová čelná stena, cca 400 mm vysoká * Držiak náhradnej pneumatiky pred čelnou stenou * Na pozinkovanej prípojnej lište vpredu žlto-červené pneumatické spojky * 4 kusy zarážok s držiakom (± 5 kg) * Riadenie náprav zpredu a zozadu pomocou káblovej diaľkového ovládania cez tlačidlá, so systémom kontroly stopy náprav (bez inštalácie v ťahači) * Elektro-hydraulická agregát (± 45 kg) * Žltá reflexná páska podľa predpisov EÚ na bočnej strane, na vysúvateľnej časti a vzadu na návese * 1 drevený blok, cca 500 x 250 x 200 mm * Držiak pre hliníkové rampy na nakladanie na zadnej strane vozidla * Držiak pre otočnú výstražnú lampu na zadnej strane návesu * Chránič špiny na zadnej strane návesu * Európske reflexné štítky (červeno-žlté) na zadnej strane návesu * Na labutej krku a na zadnej doske vľavo a vpravo držiak pre výstražné tabule, vrátane zásuvky * Používateľská príručka a popis na USB kľúči * Nálepka s obmedzenou rýchlosťou 80 km/h vzadu a na oboch stranách * Manometer na meranie zaťaženia náprav vrátane grafu zaťaženia Vrátane špeciálneho príslušenstva * Na labutej krku hliníkové bočné steny a zadná stena, zasúvateľné, cca 2 440 x 400 mm (d x v) * Zadné pozinkované zasúvateľné steny sú odnímateľné (dĺžka nadstavby cca 2 560 mm). (± 46 kg) * Na labutej krku samostatný vzduchový prípoj so vzduchovou pištoľou * 2 pracovné reflektory so spínačom na návese, umiestnené vľavo a vpravo na plošine labutej krku * 6 párov vreciek na rámy pre zasúvateľné rámy, cca 100 x 50 mm vo vonkajšom ráme ložnej plochy * 2 páry vo vonkajšom ráme nápravy (± 29 kg) rozšírenia pozinkované, vysúvateľné o cca 230 mm na každú stranu (± 262 kg) * Hydraulické prípojky z labutej krku do nízkeho podvozu s viacnásobnou spoj

Stav: použitý, Funkcionalita: plne funkčný, pohotovostná hmotnosť: 12 900 kg, celková hmotnosť: 49 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 03/2022, Rok výroby: 2022, Faymonville 2-nápravový nízkoložný náves MEGAMAX 2x12 t PA 2 řiditelné nápravy Jednoduché teleskopické provedení, 2 x 12 t kyvné nápravy Celková délka: cca 13 500 mm Celková šířka: cca 2 550 mm Šířka u krku: cca 2 480 mm Šířka ložné plochy: cca 2 550 mm Šířka podvozku: cca 2 550 mm Technicky vysouvatelné: cca 4 700 mm Výška sedla (zatížená): cca 1 205 mm Ložná výška (max. zatížená): cca 1 005 mm Délka ložné plochy: cca 6 850 mm Délka podvozku: cca 2 600 mm Rozměr sedlového čepu: cca 1 200 mm Poloměr opisné kružnice tahače (zadní): cca 2 300 mm Poloměr opisné kružnice (přední): cca 1 800 mm Rozvor náprav: cca 1 360 mm Lámač: - Lámač v SNT designu pro optimalizaci délky ložné plochy, délka cca 3 750 mm - Lámač hydraulicky zdvihací/snímací a odnímatelný - Technické zatížení na sedlový čep: 25 000 kg Kotelní most: - Nízký, výsuvný kotelní most „SUPER LOW“ design - Délka cca 6 850 mm, s mechanickým zajištěním Nsdpfey Hxd Isx Afmold Podvozek (zadní část): - Zadní podvozek s uzavřeným vnějším rámem, slzový plech a průběžná bagrová kapsa Prisma, cca 1 250/700 x 505 mm, vzadu otevřená - Kývné nápravy, všechny nápravy hydro-mechanicky nuceně řízené - Ventil přetržení hadic na vyrovnávacím válci s automatizovanou funkcí RESET - Hydraulický válec se zajišťovacím trnem a kolíkem pro fixaci ve zvednuté poloze - Technické zatížení na nápravu: každá 12 000 kg - Hydraulické vyrovnání náprav Brzdová soustava: - Brzdová soustava WABCO, EBS-E dle předpisů Obutí podvozku: - 245/70 R 17.5 3PMS Metalizace: - Celková HRM metalizace (High Resistance Metallisation) - Celá ocelová konstrukce tryskána, následně žárově zušlechtěná ZINACOR 850 (zinek 85 %, hliník 15 %) Lakování: - 6členná finální úprava - Celá ocelová konstrukce po svařování tryskána. Jedna vrstva základního nátěru na bázi zinku, jedna vrstva přilnavého primeru. Závěrečná vrstva 2x dvousložkový lak (akryl), jednobarevný, následně dutiny zalakovány speciálním voskem - Barva návěsu: RAL 3002 karmínově červená - Barva ráfků: stříbrná šedá - Barva bočních stěn: přírodní hliník Ocelová konstrukce: - Ocelová konstrukce z vysoce pevných jemnozrnných ocelí. - Kvality oceli: S355J2+N/S355MC (meze kluzu 355 MPa) S690QUS700MC (meze kluzu 690 MPa) - Svařovací proces MAG dle EN ISO 4063

Stav: použitý, maximálna hmotnosť nákladu: 25 630 kg, celková hmotnosť: 38 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 11/2024, ďalšia kontrola (TÜV): 11/2026, Výbava: ABS,

Stav: nový, maximálna hmotnosť nákladu: 98 290 kg, celková hmotnosť: 126 000 kg, konfigurácia náprav: 3 nápravy, Výbava: ABS, Celý náš vozový park s okamžite dostupnými aj krátkodobo dostupnými vozidlami nájdete na našej webovej stránke. Výňatok z výbavy. Kompletný zoznam výbavy na vyžiadanie. Labuťový krk: * MAX810-Hals-V-30-2.70-2{DSR 2 700/ASH 1300->1400} * Hydraulicky zdvíhateľný/sklápateľný a demontovateľný labuťový krk. Dĺžka cca 3 650 mm * Nákladné vozidlo – hydraulický pripojovací bod s regulátorom prietoku (20 l/min), * vrátane portálu na zavesenie prívodných vedení; nádrž ťahača musí mať min. 80 l so spojkami MAX Trailer, v opačnom prípade spojky zabezpečuje zákazník EXW. * Pre ťahače: 6 x 4 alebo 8 x 4 Nakladacia plocha MAX810-6-A-11.00-17.5-1.50-2.75-PA-X * 6-nápravová teleskopická nakladacia plocha s čapovým okom vpredu, vzadu skosenie cca 500 mm x 8°. Nodpfx Afszbfuhemeld * Dĺžka: cca 11 000 mm * Technicky roztiahnuteľná o cca 7 700 mm * Vzdialenosť náprav: cca 1 500 mm * Hydraulický uzatvárací čap. KYVADLOVÁ NÁPRAVA 2-NÁPRAVOVÝ PREDNÝ PODVOZOK – KYVADLOVÁ NÁPRAVA * Všetky nápravy hydro-mechanicky nútene riadené. * MAX810-podvozok-PA-X-F-2-17.5-1.50-2.75 čapové oká vpredu aj vzadu. * Dĺžka: cca 2 970 mm, šírka podvozku: cca 2 750 mm * BEKA-MAX centrálny mazný systém pre 2-nápravový podvozok s tukom NLGI-2 * Výsuvné rozširenia o cca 230 mm na každú stranu pre 2-nápravový podvozok. (± 27 kg) KYVADLOVÁ NÁPRAVA 6-NÁPRAVOVÁ NAKLADACIA PLOCHA – KYVADLOVÁ NÁPRAVA * Všetky nápravy hydro-mechanicky nútene riadené. * Ventil na ochranu pred zlomením hadice na vyrovnávacom valci náprav s automatickou RESET-funkciou. * Hydraulické valce s uzatváracími kohútmi a zaisťovacími kolíkmi na zabezpečenie v zdvihnutej polohe. * Technická nosnosť nápravy: 13 740 kg na nápravu (30 km/h) * Hydraulické vyrovnávanie náprav. PNEUMATIKY * 24x výrobca podľa nášho výberu (M+S) 245/70 R17.5 * Index zaťaženia 143/141L (146/146F) * TPMS: Systém monitorovania tlaku v pneumatikách podľa ECE R 141. Lakovanie náprav * 2 vrstvy 2K náteru, jednofarebne v DB7350 Novagrau. * LAKOVANIE Kompletná oceľová konštrukcia je po zváraní automaticky otryskaná rotačnou tryskacou jednotkou. * Druhé otryskávanie korundom pre optimálnu priľnavosť povrchovej úpravy. * HRM-metalizácia celého podvozku so ZINACOR 850 (85% zinok / 15% hliník) pre maximálnu ochranu proti korózii. * LAKOVANIE Návěs v odtieni karmínovo červená (RAL 3002) Vrátane nasledujúceho príslušenstva: * Portál s navijakom pre rezervné koleso na prednej strane labuťového krku. * 3,5-palcový king pin * Oceľová čelná stena cca 400 mm vysoká. * Nasúvacie ALU bočnice a zadná stena na labuťovom krku, cca 400 mm vysoké, v eloxovanom prevedení. * Ovládacie páky na labuťovom krku chránené skladacím krytom. * Osvetlenie ovládania na labuťovom krku s vypínačom. * Jedna 7-pólová zásuvka vľavo a vpravo vzadu na labuťovom krku pre výstražnú tabuľu. * Tlakomer zaťaženia na labuťovom krku na zistenie zaťaženia náprav podvozku vpredu a vzadu. * BEKA-MAX centrálny mazný systém pre labuťový krk s tukom NLGI-2. * Hydraulické prepojenia z labuťového krku k podlahe so skrutkovacími spojkami. * Prístup na labuťový krk. * 1-valcový dieselový motor Hatz (Silent Pack) s elektrickým štartérom a štartovacou batériou. Výkon: 9,5 kW (12,9 PS) pri 3 000 ot./min, emisná trieda: EU Stage V, max. hydraulický tlak: 280 bar, max. prietok: 21 l/min, montáž na labuťovom krku. * Hydraulická nádrž 100 l, rám žiarovo pozinkovaný (± 480 kg) * Hydraulické prepojenie medzi powerpackom a pripojovacou doskou na labuťovom krku. * Diaľkové ovládanie: * Ovládanie powerpacku, štart/sto...

Stav: nový, maximálna hmotnosť nákladu: 30 190 kg, celková hmotnosť: 43 000 kg, konfigurácia náprav: 2 nápravy, Výbava: ABS, You can find our complete range of immediately and short-term available vehicles on our website. Excerpt from the equipment list. Full specification available upon request. Loading platform: - Low bed with externally mounted beams, extendable in SUPER LOW design, approx. 6,850 mm long - Low bed with fixed hardwood floor, approx. 40 mm thick, with mechanical locking - Supply lines are protected within the extendable beams and automatically adjust to the current low bed length - 5 pairs of outward-folding lashing rings (LC 10,000 daN) - 6 pairs of threaded blocks on the inner beam for mounting screw-in RUD rings Gooseneck: - Gooseneck in SNT design for optimum loading length, approx. 3,750 mm long - Gooseneck hydraulically lift/lowerable and removable - Technical fifth-wheel load: 23,000 kg - Suitable for tractor units (4x2, 6x2) Rear chassis: - Rear chassis in short design with closed outer frame and chequer plate cover - Chassis with excavator recess, closed at the rear section for housing air tanks - 2 pairs of outward-folding lashing rings (LC 5,000 daN) - 1 pair of outward-folding lashing rings (LC 10,000 daN) - 1 pair of horizontal lashing rings at front & rear of the chassis (LC 10,000 daN) Axles: - BPW axles with hydro-mechanical forced steering - Technical axle load: 12,000 kg each - Air suspension with lift/lower valve Tyres: - 245/70 R 17.5 3PMSF tyres, brand of our choice - Load index (146/146F) - TPMS tyre pressure monitoring system (ECE R 141 compliant) - Data transfer to tractor via standardised EBS interface per ISO 11992 - For proper display, the tractor unit must be able to transmit and display these data Brake system: - Brake system compliant with EU regulations with EBS-E (2S2M) Electrical system: - Electrical system per EU regulations, lighting 24 V ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX at the front wiring harness with sockets 24N, 24S & 15 pin according to ISO: 24N ISO-1185, 24S ISO-3731, 15 pin ISO-12098 Nodpsxarl Nsfx Afmold Steel construction: - Steel structure made of high-strength fine-grained steels - Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: - Entire steel structure automatically shot-blasted after welding - Second blasting with corundum for optimal coating adhesion - Whole vehicle chassis metalized with ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection - Final coat with 2 layers of 2K topcoat, single-colour in RAL 3002 Carmine Red, per RAL system 841GL - Rims in silver - Rear section metalized and painted in RAL 9010 (Pure White) - No metallic finishes possible - Paint structure salt spray-tested per ISO 9227-NSS - Cavities sealed with special wax Includes the following additional equipment: - 2-inch king pin - One galvanized steel front wall, approx. 400 mm high - Remote steering at front and rear via cable remote control with push buttons, incl. single-wheel tracking (without installation in tractor unit) - Hydraulic connections from gooseneck to low bed via multi-coupling instead of screw couplings - Electro-hydraulic power unit - Preparation for mounting screwed container locks for one 20' or one 40' container on the outer beams - No container locks included

Stav: nový, maximálna hmotnosť nákladu: 25 645 kg, celková hmotnosť: 38 000 kg, konfigurácia náprav: 2 nápravy, celková šírka: 2 540 mm, Výbava: ABS, Náš kompletný sklad vozidiel s okamžite a krátkodobo dostupnými vozidlami nájdete na našej webstránke. Výpis z výbavy. Kompletná výbava na vyžiadanie. Ložná plocha: Nízkozdvižná plošina so stredovým nosníkom, výsuvné prevedenie, dĺžka cca 6 750 mm * 5 párov sklopných úchytných krúžkov von (LC 5 000 daN) * 1 pár sklopných úchytných krúžkov von (LC 10 000 daN) * 1 pár ležatých úchytných krúžkov vzadu na ložnej ploche (LC 10 000 daN) Labutí krk: * Hydraulicky zdvíhateľný / spustiteľný a odpojiteľný labutí krk Podvozok vzadu: * Zadný podvozok, krátka verzia s uzavretým vonkajším rámom a krytom z ryhovaného plechu * Podvozok s výrezom pre rýpadlo, ktorý je vzadu uzavretý na uloženie vzduchových nádrží * 2 páry sklopných úchytných krúžkov von (LC 5 000 daN) * 1 pár sklopných úchytných krúžkov von (LC 10 000 daN) * 1 pár ležatých úchytných krúžkov vzadu na podvozku (LC 10 000 daN) Nápravy: * BPW nápravy, hydro-mechanicky nútene riadené * Vzduchové pruženie s ventilom na zdvíhanie a spúšťanie Pneumatiky: * Pneumatiky 245/70 R 17.5 3PMSF * TPMS: systém kontroly tlaku v pneumatikách podľa ECE R 141 Brzdová sústava: Nljdpexf Silsfx Afmod * Brzdová sústava Wabco podľa predpisov EÚ s EBS-E (2S2M) Lakovanie: Kvalitný 2-komponentový (2K) vrchný náter v jednofarebnom prevedení RAL 3000 ohnivo červená Vrátane nasledujúcej doplnkovej výbavy: * 2 kráľovské čapy * Pozinkovaná čelná stena, cca 400 mm vysoká * Doťahovanie zpredu a zozadu pomocou káblového diaľkového ovládania cez tlačidlá, s kontrolou vedenia náprav (bez inštalácie v ťažnom vozidle) * Elektrohydraulická jednotka * Manometer zaťaženia pre určenie zaťaženia nápravy vrátane diagramu zaťaženia * Na labutiom krku hliníkové bočné steny a zadná stena, nasúvacie, cca 2 440 x 400 mm (d x v). Zadné pozinkované zasúvacie stĺpiky sú odnímateľné. (Dĺžka nadstavby cca 2 560 mm) * Na labutiom krku samostatný vzduchový prípoj so vzduchovou pištoľou * 2 pracovné svetlá s prepínačom na náves, umiestnené na plošine labutieho krku vľavo a vpravo * INOX náradový box cca 1 350 x 400 x 400 mm na labutiom krku * 6 párov vreciek na stĺpiky pre zasúvacie stĺpiky cca 100 x 50 mm vo vonkajšom ráme ložnej plochy, 2 páry vo vonkajšom ráme podvozku * Pozinkované rozšírenia, vysúvateľné o cca 230 mm na každú stranu * Hydraulické prípojky z labutieho krku do nízkozdvižnej plošiny s multikonektorom namiesto skrutkových spojok. Bez záruky tesnosti * Centrálne maznanie s 2 čerpadlami BEKAMAX (Pico) s bežným tukom NLGI-2 a odnímateľnou ochranou okolo čerpadla * 2 páry vreciek WADER na kontejnery v ložnej ploche, na 1x20' kontajner * Odnímateľný pozinkovaný medzistôl s 1 párom WADER vreciek na kontejnery * 1 pár oceľových rámp na premostenie závesných hákov nízkozdvižnej plošiny * Na ložnej ploche je nanesená piesková vrstva proti pošmyknutiu * HRM metalizácia (High Resistance Metallisation)

Stav: nový, pohotovostná hmotnosť: 9 300 kg, maximálna hmotnosť nákladu: 30 100 kg, celková hmotnosť: 39 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 8 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R17.5, Výbava: ABS, Gooseneck: - Gooseneck with rear bevel of approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Extendable loading platform: - Loading platform in extendable design with rear bevel of approx. 1,000 mm x 8° - 5 pairs of foldable external lashing rings (LC 5,000 daN) - 3 pairs of foldable external lashing rings (LC 10,000 daN) - 1 pair of flat lashing rings at the front of the loading platform (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, checker plate covering over the axles Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and tyres: - BPW axles, hydro-mechanically forced-steered - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Axle tools - TPMS tyre pressure monitoring system according to ECE R 141 - Tyres 235/75 R17.5 3PMSF Nledpfx Aeyxc Eyjfmed Accessories included: - 2" king pin - One galvanised steel front bulkhead, approx. 400 mm high - Yellow-red air couplings on galvanised supply line at the front - 2 wheel chocks with holder at the front bulkhead - One spare wheel with holder in front of the front bulkhead - Electro-hydraulic power unit - Steering override, operated from front and rear via cable remote control with push buttons, with single-track axle control - European reflector boards (red-yellow) at the rear of the trailer - White reflective tape according to EU regulations on the sides and on the extension, red at the rear - On the gooseneck and at the rear, left and right, each a bracket for warning signs, including socket - Sliding bracket for aluminium approach ramps at the rear of the vehicle - Bracket for a rotating beacon at the rear of the trailer - Galvanised folding supports beneath the rear bevel of the loading platform - One mud flap at the rear of the trailer - Manual and documentation on USB stick - BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and removable protection for the pump - On the gooseneck, plug-in aluminium side and rear walls approx. 2,440 x 400 mm - The rear galvanised plug-in stanchions are removable (body length: approx. 2,560 mm) - 3 pairs of WADER container pockets in the loading platform for 1x 20ft, 1x 30ft or 1x 40ft container - 6 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the loading platform - INOX toolbox 1,500 x 390 x 810 under the loading platform on the right (in direction of travel) - Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm with a position light - Bracket for rotating beacon mounted on the warning signs - Radio remote control for steering override, in addition to cable remote control, with indicator lights on the receiver for single-track control - Anti-slip sand coating painted onto the checker plates on the gooseneck and on the loading platform - 80 km/h speed stickers at the rear and both sides - Load gauge to determine axle loads, including load diagram

Stav: nový, maximálna hmotnosť nákladu: 39 720 kg, celková hmotnosť: 50 960 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, You can find our full vehicle inventory, including immediately and short-term available vehicles, on our website. Nlsdpfx Aeu Sd U Ujfmed Excerpt of features. Complete specifications available on request. Gooseneck * With beveled front corners approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood floor approx. 30 mm thick Loading Platform Loading platform in extendable design * 5 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of flat lashing rings at the front of the loading platform (LC 10,000 daN) * Cutouts in the outer frame of the loading platform for hooking tension belts (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering Landing Legs * JOST (mechanical) with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Axles * BPW axles, two rigid axles and two trailing steering axles, with drum brakes * Air suspension with lifting/lowering function * Trailing steering axle with electro-magnetic reversing lock, can be activated by reverse gear or manually * Tires: 205/65 R 17.5 Brake System * Wabco braking system in accordance with EU regulations with EBS-E (4S3M), without connection lines to the tractor unit Steel Construction * Made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Painting * First-class and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer * High-quality, single-color 2-component (2K) top coat in RAL 3002 Carmine Red * Rear section metallized and finished in RAL 9010 (Pure White) * Rims in silver Standard Accessories * 2-inch king pin * Galvanized steel front wall approx. 400 mm high * Spare wheel holder in front of the front wall * At the galvanized connection rail at the front, yellow-red air couplings * 4 wheel chocks with holder at the front wall * Rear mount for aluminum loading ramps at gooseneck * Galvanized folding supports under the loading platform’s bevel * Holder for a revolving beacon at the rear of the trailer * Yellow reflector tape according to EU regulations on the sides, extension, and rear of the trailer * At the gooseneck and rear panel, left and right, each with a bracket for warning signs including socket * TPMS tire pressure monitoring system according to ECE R 141. Data transmission to the truck is via the standardized EBS interface according to ISO 11992; for correct display, the truck must be able to receive and show this data * On the gooseneck, plug-in aluminum drop sides and rear wall, approx. 2,440 x 400 mm (L x H), the rear galvanized plug-in posts are removable. (Superstructure length approx. 2,560 mm) * Galvanized toolbox, integrated in the beveled gooseneck * 6 pairs of WADER container pockets in the loading area, for 1 x 20' container, 2 x 20' containers, or 1 x 40' container * Adjustable mounting rails for aluminum loading ramps at the rear of the vehicle * 7 pairs of stake pockets for plug-in posts approx. 100 x 50 mm in the outer frame of the loading platform * One galvanized bracket transversely under the loading platform * Extendable galvanized side extensions, approx. 230 mm per side * Lift axle on front axle with control by TEBS E depending on current axle load and loading condition * 5 pairs of recessed lashing rings along the central beam (LC 5,000 daN)...

Stav: použitý, pohotovostná hmotnosť: 10 600 kg, maximálna hmotnosť nákladu: 39 400 kg, celková hmotnosť: 50 960 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 09/2024, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 760 mm, zavesenie: vzduch, veľkosť pneumatiky: 205/65 R17.5, farba: sivý, Rok výroby: 2024, prevádzková hmotnosť: 10 600 kg, Výbava: ABS, Labuťový krk: -Labuťový krk s obložením z tvrdého dreva, hrúbka 30 mm -Zadná časť labuťového krku v priamej verzii -3 páry upevňovacích očiek (LC 5 000 daN) Ložná plocha v zasúvateľnej verzii: -Ložná plocha v zasúvateľnej verzii -5 párov upevňovacích očiek, sklopných vonkajšou stranou (LC 5 000 daN) -3 párov upevňovacích očiek, sklopných vonkajšou stranou (LC 10 000 daN) -1 pár upevňovacích očiek umiestnených vodorovne v prednej časti ložnej plochy (LC 10 000 daN) -Výrezy vo vonkajšom ráme ložnej plochy na pripevnenie napínacích pásov (LC 2 000 daN) -Obloženie z tvrdého dreva, hrúbka cca 48 mm, na ložnej ploche nad nápravami profilované oceľové plechy Podpery pre sedlo: -JOST podpery pre sedlo (mechanické) s 2-stupňovou prevodovkou pre 24 t nosnosť (50 t skúšobná nosnosť) Nápravy a pneumatiky: -Nápravy BPW, dve nápravy pevné, dve nápravy s nakláňaním -Vzduchové odpruženie, s bubnovou brzdou, s funkciou zdvíhania/spúšťania -Nakláňané nápravy s elektromenetickým systémom blokovania pri cúvaní, aktivovateľným prostredníctvom spiatočky alebo manuálne -Pneumatiky 205/65 R17.5 Brzdový systém: -Brzdový systém v súlade s predpismi EÚ, EBS-E (4S3M) Oceľová konštrukcia: -Oceľová konštrukcia z vysoko pevnej jemnozrnnej ocele -Druhy ocele: -S355J2+N/S355MC (medza pružnosti 355 MPa) -S690QL/S700MC (medza pružnosti 690 MPa) Elektrický systém: -Elektrický systém v súlade s predpismi EÚ, osvetlenie 24 V, ASPÖCK-NORDIK (ASS3) -ASPÖCK-UNIBOX na prednom pripojovacom paneli so zásuvkami 24N, 24S a 15-pólovou zásuvkou Lakovanie: -Prvotriedna a odolná antikorózna ochrana štandardne pieskovaného zvarovaného rámu, zaručená 2-zložkovou (2K) zinkovou základnou vrstvou -Kvalitná 2-zložková (2K) finálna vrstva laku, jednofarebná, v odtieni Novagrau Dodatočné vybavenie v cene: -Jedna rezerva s držiakom pred čelnou stenou -2" kráľovská spojka -Pozinkovaná oceľová čelná stena, výška cca 400 mm -Žlto-červené vzduchové spojky na pozinkovanom pripojovacom paneli vpredu -4 kusy blokovacích klinov s držiakom na čelnej stene -Pozinkované výklopné podpery pod skosenou časťou ložnej plochy Nedpfjw Adkxjx Afmsld -Držiak pre výstražné svetlo na zadnej časti prívesu -Rozšírenia, pozinkované, zasúvateľné o cca 230 mm na každú stranu -Biela reflexná páska v súlade s predpismi EÚ, na boku, na vysúvateľnej časti a vzadu červená -Na labuťovom krku a na zadnom plechu, na ľavej a pravej strane, po jednom držiaku pre výstražné tabule vrátane zásuvky -Jedna ochrana proti striekajúcej vode na zadnej časti prívesu -Európske reflexné tabule (červeno-žltá) na zadnej časti prívesu -Používateľská príručka a popis na USB pamäti -Systém monitorovania tlaku v pneumatikách TPMS podľa normy ECE R 141 -Na labuťovom krku zásuvné bočné a zadné steny z hliníka, rozmery cca 2 440 x 400 mm -Zadné, pozinkované zásuvné rámy sú odnímateľné, dĺžka konštrukcie cca 2 560 mm -7 párov držiakov pre kontajnery WADER -1x 20-stopový kontajner v ložnej ploche; 1x 40-stopový kontajner v ložnej ploche; 1x 40-stopový kontajner nad labuťovým krkom; 2x 20-stopové kontajnery -7 párov držiakov pre zásuvné rámy 100 x 50 mm vo vonkajšom ráme ložnej plochy -Zdvihacia náprava na prednej náprave s ovládaním cez TEBS E v závislosti od aktuálnej hmotnosti nápravy a aktuálneho stavu zaťaženia -Posuvná zásuvná lišta pre hliníkové nakladacie rampy na zadnej časti vozidla -Na profilovaných plechoch na labuťovom krku a na ložnej ploche nanesená vrstva piesku ako ochrana proti kĺzaniu -Štyri výstražné tabule, výsuvné o cca 400 mm, rozmery cca 423 x

Stav: nový, maximálna hmotnosť nákladu: 73 540 kg, celková hmotnosť: 102 000 kg, konfigurácia náprav: 3 nápravy, Výbava: ABS, Our complete vehicle inventory, including immediately and short-term available vehicles, can be found on our website. Excerpt from the equipment. Full specifications available on request. Gooseneck: * Gooseneck hydraulically height-adjustable and detachable, length approx. 3,650 mm Nledpoxbmplsfx Afmsd * 2 pairs of folding lashing rings on the outer side (LC 5,000 daN) * 2 pairs of lashing rings on the gooseneck (LC 10,600 daN) * 1 pair of lashing rings at the center section of the gooseneck (LC 10,600 daN) * For 6x4 or 8x4 2-axle tractor units Compact front axle assembly: * Hook coupling front and rear, length approx. 2,200 mm * Chassis width: approx. 2,850 mm Excavator deck: Telescopic excavator deck with drive-over bridge hooks at the front and pin-eye coupling at the rear * Base width: approx. 2,850 mm * Length: approx. 6,650 mm * Beam height: approx. 400 mm * Beam width: approx. 1,350 mm * Loading height approx. 550 mm at ground clearance approx. 150 mm 4-axle rear axle assembly: * Mechanical pin-lug coupling for installing a low-bed at the front * Rear cross member, chassis width: approx. 2,850 mm * Chassis length: approx. 5,480 mm Pendulum axles, all axles hydro-mechanically forced-steered * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation Tyres * Front axle assembly: * 8 x manufacturer’s choice (M+S) 285/70 R19.5 * Rear axle assembly tyres: * 16 x manufacturer’s choice (M+S) 285/70 R19.5 * Load index 150/148J Paintwork: * Complete steel structure automatically shot-blasted after welding using a shot wheel blast system. Second blasting operation with corundum for optimum adhesion of the coating system * HRM metallisation of the entire chassis using ZINACOR 850 (85% zinc/15% aluminium) to guarantee best corrosion protection * Final coating with 2 layers of 2K top coat, single colour in RAL 3002 carmine red, according to RAL 841GL system Including the following accessories * Steel front wall, approx. 400 mm high * Removable ALU side walls and rear wall on the gooseneck, approx. 400 mm high, anodised version * 3.5-inch kingpin * Truck hydraulic connection with flow regulator (20 l/min) * Gantry for suspending supply lines, the tank of the tractor unit must hold at least 80 l * With MAX Trailer coupling pieces, otherwise coupling pieces to be provided by the customer ex works * BEKA-MAX central lubrication system for one gooseneck with universal grease NLGI-2 * Tool kit item no. 612452 * Multi-coupling hydraulic connections on the gooseneck * Front axle assembly with a separate air connection for air screwdriver * BEKA-MAX central lubrication system for a 2-axle bogie with universal grease NLGI-2 * One 7-pin socket left and right at the rear of the front axle assembly for warning signs * Screw-in option (diameter approx. 40 mm) every approx. 500 mm on the upper flange of the outer tube of the excavator deck for screw-on rings (LC 16,000 daN) * Folding extensions with steel pads, adjustable in width from approx. 2,850 mm to approx. 3,250 mm * BEKA-MAX central lubrication system for a 4-axle bogie with universal grease NLGI-2 * At the rear axle assembly a socket for the cable remote control of the rear axle steering * Rear bogie with trough * Two INOX toolboxes, approx. 855 x 340 x 390 mm, on the gooseneck, left and right * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery * Radio remote control: * Operation of the powerpack, start/stop of the diesel engine * Operation of the rear axl

Stav: veľmi dobrý (použitý), konfigurácia náprav: 2 nápravy, povolené zaťaženie nápravy (náprava 1): 10 500 kg, dovolené zaťaženie nápravy (náprava 2): 10 500 kg, prvá registrácia: 06/2017, celková dĺžka: 7 000 mm, celková šírka: 2 500 mm, celková výška: 880 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/70 R17.5, stav pneumatík: 75 percento, farba: iný, Rok výroby: 2017, Výbava: ABS, = Ďalšie možnosti a príslušenstvo = - 2 nápravy - vzduchové odpruženie Nodpfx Afezc Ucdsmjld = Ďalšie informácie = Rozmer pneumatík: 235/70 R17.5 Dezén pneumatík: 75 % Brzdy: bubnové brzdy Zadná náprava 1: dvojmontáž; max. zaťaženie nápravy: 10 500 kg Zadná náprava 2: dvojmontáž; max. zaťaženie nápravy: 10 500 kg Celková povolená hmotnosť: 21 000 kg Technický stav: veľmi dobrý Vizuálny stav: veľmi dobrý ŠPZ: QALO590

Stav: nový, pohotovostná hmotnosť: 9 600 kg, maximálna hmotnosť nákladu: 53 400 kg, celková hmotnosť: 63 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 12 400 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 1 340 mm, zavesenie: vzduch, veľkosť pneumatiky: 385/65 R22.5, farba: sivý, Výbava: ABS, Loading area: - Loading platform with approx. 30 mm thick hardwood floor - 10 pairs of fold-out lashing rings on the outside Landing legs: - JOST landing legs with 2-speed gearbox for 24 t lifting capacity Axles and tyres: - BPW axles, technical capacity 10,000 kg, first axle rigid, all other axles hydro-mechanically forced-steered, mounted on turntables - Air suspension with raise and lower valve - Axle tools - Tyres 385/65 R22.5 Braking system: - WABCO braking system according to EU regulations with EBS-E (4S3M) Steel construction: - Steel structure made from high-tensile fine-grain steels - Steel grades: S355J2+N/S355MC S690QL/S700MC Electrical system: - Electrical system according to EU regulations, lighting 24 Volt - ASPÖCK UNIBOX on the front connector strip with 24N, 24S & 15-pin sockets - Connections compliant with ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Painting: - First-class and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component zinc dust primer - High-quality 2-component top coat in a single colour, Nova grey - Rear section metallised and painted in RAL 9010 Njdorq Dlfjpfx Afmold Accessories included: - Loading area with approx. 30 mm thick hardwood floor - 2" king pin - Galvanised steel front wall approx. 1,200 mm high, EN12642-XL - Yellow-red air couplings at the galvanised front connector strip - 4 wheel chocks with holders at the front wall - Storage for 1,000 mm stake pockets in the central beam at the rear - At the gooseneck and rear plate left and right each a holder for warning signs incl. socket - Remote axle steering operation from the front and rear via cable remote control with push buttons and tracking control - Electro-hydraulic power unit - White reflective tape on sides and red at rear according to EU regulations - 12 pairs of stake pockets for 100 x 50 mm stanchions in the external frame of the loading area - European reflector plates at the rear of the trailer - Mount for a rotating beacon at the rear of the trailer - One mudflap at the trailer rear - Manual and documentation on USB stick - BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and detachable cover around the pump TPMS Tyre Pressure Monitoring System: - For correct display, the towing vehicle must be able to transmit and display this data - Lift axle on the front axle with control via TEBS E, dependent on the current axle load and loading status - Radio remote control for axle steering, in addition to cable remote, with indicator lights on the receiver for tracking control - 5 pairs of stake pocket strips, mounted crosswise on the loading area, for 100 x 50 mm stanchions - 80 km/h speed stickers, mounted at the rear and on both sides - Adjustable access ladder mounted left and right in the direction of travel - 2 reversing lights mounted on the rear panel - Load pressure gauge to determine axle loads including load chart - HRM metallisation of the external frame: Complete steel structure shot-blasted, then the defined visible areas are metallised and hot-finished with ZINACOR 850 (zinc 85% - aluminium 15%)

Stav: nový, pohotovostná hmotnosť: 10 700 kg, maximálna hmotnosť nákladu: 38 800 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 r 17,5, farba: sivo-čierny, Výbava: ABS, Gooseneck: •Gooseneck with beveled front corners at 45° and rear chamfer approx. 750 mm x 10° •3 pairs of lash rings •30 mm thick hardwood decking Extendable Load Platform: •Extendable load platform with rear chamfer approx. 1,000 mm x 8° •Cut-outs in the outer frame of the load platform for attaching lashing straps •Approx. 48 mm thick hardwood decking, over the axles with chequer plate covering Two-piece Steel Ramps: •One pair of galvanized, two-piece steel ramps with approx. 48 mm thick hardwood covering •Ramps with hydraulically foldable ramp sections, hydraulic lifting system, and hydraulic lateral adjustment •Maximum capacity per pair: approx. 40,000 kg Axles and Tyres: •BPW axles and suspension, 2 rigid axles, 1 trailing steering axle •Technical axle load: 12,000 kg •Electromagnetic reverse lock, activated via reverse gear and manually •Air suspension with lift and lower valve •Axle tools •235/75 R 17.5 3PMSF Braking System: •WABCO braking system according to EU regulations with EBS-E Paintwork: •First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component zinc dust primer •High-quality, single-tone 2-component topcoat in MB 7350 Novagrau •Rear section metalized and painted in RAL 9010 Landing Legs: •JOST landing gear with 2-speed gearbox for 24 t lifting capacity (50 t test load). Steel Construction: •Steel construction made from high-strength fine-grained steels •Steel grades: •S355J2+N/S355MC •S690QL/S700MC Electrical System: •Electrical system complying with EU regulations, 24 volt lighting •ASPÖCK-UNIBOX on the front connection board with 24N, 24S & 15-pin sockets Accessories Included: •One spare wheel with holder •One galvanized steel front wall approx. 400 mm high •Yellow-red air couplings on the galvanized front connection board Nlodpfx Afehlz S Nomed •4 wheel chocks •A holder for a warning beacon at the rear of the trailer •Recess in the rear gooseneck area for ALU approach ramps •Galvanized folding supports under the chamfer of the load platform •Cover plates to bridge the gap between the ramps and the load platform •White reflective tape as per EU regulations on the sides, extension, and rear (red) •Electro-hydraulic unit at the rear, under the load platform •One holder each on the gooseneck and on each ramp, left and right, for warning signs incl. socket •Ramp control valves mounted on the right-hand side of the trailer •On the gooseneck, ALU side and rear boards approx. 2,440 x 400 mm •Rear galvanized plug-in stakes are removable (body length approx. 2,560 mm) •Four warning panels, extendable by approx. 400 mm, each with a position light •3 pairs of WADER container pockets in the platform for a 20ft, 30ft, or 40ft container •6 pairs of stake pockets (100x50 mm) in the outer frame of the load platform •Galvanized extensions, extendable by approx. 230 mm per side •20 x 20 mm square toehold strips every 200 mm on the outer frame of the platform chamfer •Sanded surface finish painted on the chequer plates, king pin, and load platform as anti-slip protection •Load gauge for determination of axle loads, including load diagram •HRM metallization (High Resistance Metallisation) of the outer frame •Complete steel structure shot-blasted, then the defined visible areas metallized with ZINACOR 850 (zinc 85% - aluminium 15%) by hot finish

Stav: nový, pohotovostná hmotnosť: 11 000 kg, maximálna hmotnosť nákladu: 38 500 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Neck (Gooseneck): - Gooseneck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading Platform: - Telescopic loading platform with rear chamfer approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm - Wheel recesses with 15 x 15 mm square climbing strips and widenings in the lower area Nedpeup U Hzefx Afmold - Between the 1st and 2nd axle a pair of fixed wheel recesses with cover, approx. 1,610 x 970 x 400 mm - Recess in the chamfer and protruding into the loading platform for the reception of an excavator dipper stick approx. 2,900 x 750 x 210/290 mm - 1 pair of horizontal lashing rings at the front of the platform (LC 10,000 daN) - 5 pairs of fold-out lashing rings (LC 5,000 daN) - 2 pairs of fold-out lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) - Cutouts in the outer frame of the platform for securing straps (LC 2,000 daN) - incl. 3-piece removable galvanized covers over the wheel recesses – max. point load 3.5 t / each Two-Part Steel Ramps: - One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood planking - Ramp with hydraulically folding ramp sections, hydraulic lifting system, and hydraulically adjustable position Axles and Tyres: - BPW axles and suspension, 2 axles fixed, 1 axle self-steering - Technical axle load: 12,000 kg - Electromagnetic reverse lock, operable via reverse gear and manually - Air suspension with lifting and lowering valve - Axle tools - Tyres 235/75 R 17.5 - TPMS tire pressure monitoring system according to ECE R 141 Accessories included: - On the gooseneck and at the rear, left and right, each with a mount for warning signs including socket - One spare wheel - 2" king pin - One galvanized steel front wall approx. 400 mm high - Front galvanized connection rail with yellow-red air couplings - 4 wheel chocks - Galvanized extendable widenings, approx. 230 mm each side - Galvanized folding supports under the platform chamfer - One holder for a revolving beacon at the rear of the trailer - Cover plates to bridge the gap between ramps and platform - White reflector tape on sides and extension; rear in red, per EU regulations - Electro-hydraulic unit at the rear under the platform - Controls for ramps mounted on the right side of the trailer - European reflective warning signs (red-yellow) at the rear of the trailer - Four approx. 400 mm extendable warning panels, approx. 423 x 423 mm, each with a position light - Mount for revolving beacon on the warning panels - Aluminium plug-in drop sides and rear wall on the gooseneck, approx. 2,440 x 400 mm - Removable rear galvanized stanchions (body length approx. 2,560 mm) - 2 pairs of WADER container locks recessed into the platform for one 20ft or 30ft container - 3 pairs of stanchion pockets 100 x 50 mm on the outer frame of the platform - One removable galvanized intermediate table with 1 pair of WADER container locks - 20 x 20 mm square climbing strips every 200 mm on the outer frame of the platform chamfer - Painted sand layer on the tread plates on the gooseneck and the loading platform as anti-slip coating - 80 km/h speed stickers at the rear and both sides - Load manometer for determining the axle loads, including load diagram

Stav: nový, pohotovostná hmotnosť: 29 600 kg, maximálna hmotnosť nákladu: 72 400 kg, celková hmotnosť: 102 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 6 650 mm, šírka ložného priestoru: 2 840 mm, výška ložného priestoru: 550 mm, veľkosť pneumatiky: 285/70 R19.5, farba: sivý, prevádzková hmotnosť: 29 600 kg, Výbava: ABS, Gooseneck: - Hydraulically liftable/lowerable and detachable gooseneck - Length approx. 3,650 mm - For tractor units: 6 x 4 or 8 x 4 2-Axle Front Bogie: - Hook couplings front and rear - Chassis length x width approx. 2,200 mm x 2,850 mm Nlsdpfx Aewcmhasfmsd Excavator Deck “BB-A”: - Telescopic excavator deck “BB-A” with drive-over deck hooks at the front and pin & lug coupling at the rear - Length x base width approx. 6,650 mm x 2,850 mm - Beam height x beam width approx. 400 mm x 1,350 mm - Loading height 550 mm with 150 mm ground clearance 4-Axle Rear Bogie: - Mechanical pin & lug coupling at the front for attaching a lowbed, end cross-member at the rear - Chassis length x width approx. 5,480 mm x 2,850 mm - Extensive lashing positions Pendulum Axle and Tyres (front and rear chassis): - “PENDULUM AXLE”, all axles hydro-mechanically forced steered - Burst protection valve on axle compensation cylinder with automatic reset function - Hydraulic cylinders with shut-off valves and locking pins to secure in lifted position - Final axle coating with 2 coats of 2K paint, single colour in MB 7350 Novagrau - Technical axle load: 12,000 kg - Hydraulic axle balancing - Tyres: 285/70 R19.5 Follow Steering: - Remote steering from front and rear via cable remote control with push buttons, including single-track steering monitoring - Socket on gooseneck for steering control - Cable remote with push buttons and single-track control included Accessories included: - Galvanised connection bar at the front with yellow/red air couplings - Steel front wall approx. 400 mm high - 4 wheel chocks - 3.5" king pin - One 7-pin socket left and right at the rear of the gooseneck for warning panel - A-frame with winch for spare wheel at front end of gooseneck - Truck hydraulic connection with flow regulator (40 l/min), including bracket for supply line suspension; tractor fuel tank must be at least 80 litres, incl. couplers - Detachable ALU side walls and rear board on gooseneck, approx. 400 mm high, anodised - Control lever on gooseneck protected by a foldable cover - Separate air connection with blow gun on gooseneck - BEKAMAX central lubrication system, 1x on gooseneck, 1x on 2-axle bogie, 1x on 4-axle bogie - Variomax tool kit - Multi-coupler hydraulic connections on gooseneck and at lowbed hook bracket - 2 spare wheels - One 7-pin socket left and right, front and rear on rear chassis for warning panel - Front chassis with separate air connection for pneumatic screwdriver - Folding widening extenders with steel panels, width adjustable from approx. 2,850 mm to 3,250 mm - Steel panels can be positioned in two places to create a lowered loading platform - Steel panels with approx. 12 mm rubber floor covering - Threaded bushings (⌀ 40 mm) spaced approx. every 500 mm on the outer flange of the excavator deck for lashing rings - One locking position approx. every 500 mm on the extension with mechanical locking - Socket on rear chassis for cable remote control steering - 2 reversing lights on rear panel - Four warning panels, extendable by approx. 2,000 mm each, approx. 423 x 423 mm, with position light - 1 work lamp left + right on rear panel of gooseneck, separately switchable - Two INOX toolboxes, approx. 855 x 340 x 390 mm - 1-cylinder Hatz diesel engine (Silent Pack) - Radio remote control for follow steering

Stav: nový, pohotovostná hmotnosť: 17 250 kg, maximálna hmotnosť nákladu: 48 700 kg, celková hmotnosť: 66 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 7 550 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 375 mm, veľkosť pneumatiky: 245/70 R 17.5, farba: sivý, prevádzková hmotnosť: 17 250 kg, Výbava: ABS, Labutia tyč (Schwanenhals): - Labutia tyč v SNT dizajne na optimalizáciu dĺžky ložnej plochy, dĺžka cca 3 750 mm - Hydraulicky zdvíhateľná/spúšťateľná a zjazdná labutia tyč - Pre ťahače: 6 x 4 a 8 x 4 (alebo 6 x 4 s voliteľným jednoosovým dolly) Nízka ložná plocha (Tiefbett): - Nízka ložná plocha s vonkajšími nosníkmi, vyhotovená ako teleskopický most na kotly v nízkom prevedení s výsuvom vpredu - Rozmery: dĺžka x šírka cca 7 550 mm x 2 740 mm - Mechanické uzamykanie výsuvu Podvozok: - Zadný podvozok s uzavretým vonkajším rámom - Rebrovaný plechový povrch a priebežná prizmatická výrezová „baggermulda“ cca 1 450/900 x 505 mm, vzadu otvorená Nápravy, pruženie a pneumatiky: - „PENDEL-AXLE“ – všetky nápravy sú hydromechanicky riadené - Ventil proti prasknutiu hadíc na vyrovnávacích valcoch náprav s automatickou funkciou RESET - Hydraulické valce s uzatváracími kohútikmi a predpínačmi na zaistenie vo zdvihnutej polohe - Záverečný lak náprav: 2 vrstvy dvojzložkového laku v jednotnej farbe „FAY-Grau-34-0260“ - Technická nosnosť nápravy: 12 000 kg - Hydraulické vyrovnávanie záťaže na nápravy - Pneumatiky: 245/70 R 17.5 Príslušenstvo: - Predná stena z ocele, zasúvateľná, výška cca 400 mm - 4 ks kliny pod kolesá - Zadná horná časť labutej tyče zakrytá odnímateľným krytom - 1 pár oceľových nájazdových rámp so slikrami a upevňovacími kolíkmi pre mostíky na uchytenie do nízkej ložnej plochy - Rampy je možné položiť nad alebo medzi háky - Možnosti upevnenia oceľových nájazdových rámp vzadu medzi vonkajšími nosníkmi labutej tyče - Zaisťovacie miesta každých cca 1 000 mm na výsuve - 1 upevňovací krúžok vľavo a vpravo na prednom priečniku - Pripojovací panel pre napájacie vedenia k ťahaču, umiestnený na úrovni vonkajšieho rámového profilu - 6 párov závitových blokov na vonkajšej strane vnútorných nosníkov ložnej plochy pre montáž skrutkovacích krúžkov M24 - 6 párov zapustených upevňovacích krúžkov na vonkajšej strane vonkajších nosníkov ložnej plochy, sklopné dovnútra aj von - 1 pár závitových blokov vpredu a vzadu na vonkajších nosníkoch ložnej plochy pre montáž skrutkovacích krúžkov M24 - Závesná lišta pre voľné hliníkové nájazdové rampy na zadnom priečniku vozidla - Centrálne mazanie s dvoma čerpadlami značky BEKAMAX - Riadenie zadnej nápravy vpredu aj vzadu, ovládateľné káblovým diaľkovým ovládaním s kontrolou zarovnania náprav - 3 kW elektrohydraulická jednotka na ovládanie hydrauliky (okrem hydraulických navijakov) - Vyberateľná ložná podlaha (pozinkovaná), 3 diely medzi vonkajšími nosníkmi, s tvrdým drevom - Výklopné rozširovacie dosky cca 230 mm na každú stranu - Voľne položené rozširovacie dosky, s oceľovým rámom - 4 výstražné tabule cca 423 x 423 mm - Rádiové diaľkové ovládanie pre riadenie zadnej nápravy - 3,5'' kráľovský čap (königszapfen) - Protišmykový povrch na ľavom zrážaní labutej tyče Njdpfx Afoh Hm Tzsmsld - Hydraulické prípojky medzi labuťou tyčou a nízkou ložnou plochou s multispájacou namiesto skrutkových spojov - Vodiaca platňa labutej tyče pre sedlový čap, cca 800 mm široká - 1 rezervné koleso s držadlom - Parkovacie miesto na labutej tyči pre výstražné tabule pri nevyužití - 2 páry vreciek na kolíky zapustené v vonkajšom ráme podvozku pre zasúvacie kolíky cca 100 x 50 mm - Výrez lyžicovej tyče zadného podvozka vzadu uzatvorený zasúvateľnou doskou - Farba návesu: MB 7350 Novagrau

Stav: nový, maximálna hmotnosť nákladu: 49 000 kg, celková hmotnosť: 60 800 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 r 17.5, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck with chamfered front corners at 45° and rear chamfer of approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable Loading Area: - Extendable loading area with rear chamfer of approx. 1,000 mm x 8° - 5 pairs of fold-out lashing rings on the outside (LC 5,000 daN) - 3 pairs of fold-out lashing rings on the outside (LC 10,000 daN) - 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) - Cut-outs in the external frame of the loading area for attaching tie-down straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, with chequered plate covering over the axles Detachable Two-Part Ramps: - One pair of galvanized, two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood overlay Nedpfx Afoh Etf Romjld - Ramps with hydraulically folding ramp sections, hydraulic lift and hydraulically adjustable side shift - Max. load per pair: 40,000 kg Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and Tyres: - BPW axles, two rigid axles, two self-steering axles, air-suspended, with drum brakes, lifting/lowering function - The self-steering axles can be locked via electromagnetic reverse lock through reverse gear or manually - Axle tools - Tyres: 235/75 R 17.5 Brake System: - Brake system in accordance with EU regulations with EBS-E (4S3M) Steel Construction: - Steel construction made from high-strength fine-grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Paintwork: - Premium and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc-rich primer - High-quality 2-component (2K) topcoat in single-tone Novagrey Electrical System: - Electrical system according to EU regulations, ASPÖCK-NORDIK (ASS3) 24 Volt lighting - ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets Included Accessories: - 2" king pin - One galvanized steel front wall, approx. 400 mm high - One spare wheel with holder in front of the front wall - Yellow and red air couplings on galvanized front terminal strip - 4 wheel chocks with holder on the front wall - Mounting at the rear of the gooseneck for ALU approach ramps - Galvanized folding supports under the chamfered loading area - Bracket for a rotating beacon - Cover plates to bridge the gap between ramps and loading area - White reflective tape according to EU regulations on the sides, red at the rear and on the extension - Electro-hydraulic power unit - At the gooseneck and on the ramps, left and right, each with mounting for warning panels including socket - Control valves for the ramps mounted on the right side of the semi-trailer - Mudflap at the rear of the trailer - User manual and description on USB stick - Removable ALU side boards and rear panel on the gooseneck, approx. 2,440 x 400 mm - Rear galvanized stanchions removable (body length approx. 2,560 mm) - 4 pairs of WADER container pockets in the loading area for a 20 ft, 2x 20 ft or a 40 ft container - 7 pairs of stake pockets for 100 x 50 mm stakes in the external frame of the loading area - Extensions, galvanized, retractable by approx. 230 mm per side - Lift axle on the front axle with control - 20 x 20 mm square climbing strips - BEKAMAX central lubrication system - Four warning panels extendable by approx. 400 mm (approx. 423 x 423 mm)

Stav: nový, pohotovostná hmotnosť: 10 600 kg, maximálna hmotnosť nákladu: 39 400 kg, celková hmotnosť: 50 960 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 760 mm, zavesenie: vzduch, veľkosť pneumatiky: 205/65 R17.5, farba: sivý, prevádzková hmotnosť: 10 600 kg, Výbava: ABS, Gooseneck: - Gooseneck with 30 mm hardwood floor - Gooseneck in straight design at the rear - 3 pairs of lashing rings (LC 5,000 daN) Extendable loading area: - Loading area in extendable version - 5 pairs of lashing rings foldable outwards - 3 pairs of lashing rings foldable outwards - 1 pair of lashing rings laid flat at the front of the loading area - Cut-outs in the outer frame of the loading area for attaching tension belts - Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering Landing legs: - JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and tyres: - BPW axles, two rigid, two trailing steering axles - Air suspension, with drum brakes, with lifting/lowering function - The trailing steering axles with electro-magnetic reversing lock, can be activated either via reverse gear or manually - Axle tools - Tyres 205/65 R17.5 Brake system: - Brake system in accordance with EU regulations with EBS-E (4S3M) Steel construction: - Steel construction made of high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system in accordance with EU regulations, 24-volt lighting, ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets - Connections according to ISO: - 24N ISO-1185 - 24S ISO-3731 Nsdpot Ag Uwsfx Afmeld - 15-pin ISO-12098 Paintwork: - First-class and long-lasting corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) top coat, single-colour in Novagrau - Rear section metalized and painted in RAL 9010 (pure white) Included accessories: - One spare wheel with holder in front of the front wall - 2" kingpin - Galvanized steel front wall approximately 400 mm high - Yellow-red air couplings on the galvanized connection bar at the front - 4 wheel chocks with holders on the front wall - Galvanized folding supports under the sloped loading area - Bracket for a revolving beacon at the rear of the trailer - Galvanized, extendable width approx. 230 mm per side - White reflective tape to EU regulations on the side, at the extension, and red at the rear - At the gooseneck and on the rear plate, left and right, one bracket for warning signs each, including socket - European reflective warning plates (red-yellow) at the rear of the trailer - TPMS tyre pressure monitoring system according to ECE R 141 - On the gooseneck, plug-in aluminium side and rear panels approx. 2,440 x 400 mm - The rear, galvanized plug-in stakes are removable, length of the structure approx. 2,560 mm - 7 pairs of WADER container locks - 1x 20ft container on the loading area; 1x 40ft container on the loading area; 1x 40ft container above the gooseneck; 2x 20ft containers - 7 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area - Lift axle at the front axle controlled by TEBS E, depending on current axle load and load condition - Movable hanging bar for aluminium approach ramps at the rear of the vehicle - On checker plates on the gooseneck and loading area, a painted-in sand layer as anti-slip protection - Four warning signs each extendable by approx. 400 mm, size approx. 423 x 423 mm, with position light - On warning signs, bracket for rotating beacon - 80 km/h speed stickers on the rear and both sides - Load manometer for determining axle l