Plošinový náves

Faymonville MAX Trailer 3-Achs-Plateau-Sattelaufl.

Stav: nový, maximálna hmotnosť nákladu: 49 000 kg, celková hmotnosť: 60 800 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 r 17.5, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck with chamfered front corners at 45° and rear chamfer of approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable Loading Area: - Extendable loading area with rear chamfer of approx. 1,000 mm x 8° - 5 pairs of fold-out lashing rings on the outside (LC 5,000 daN) - 3 pairs of fold-out lashing rings on the outside (LC 10,000 daN) - 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) - Cut-outs in the external frame of the loading area for attaching tie-down straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, with chequered plate covering over the axles Detachable Two-Part Ramps: - One pair of galvanized, two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood overlay - Ramps with hydraulically folding ramp sections, hydraulic lift and hydraulically adjustable side shift - Max. load per pair: 40,000 kg Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and Tyres: - BPW axles, two rigid axles, two self-steering axles, air-suspended, with drum brakes, lifting/lowering function - The self-steering axles can be locked via electromagnetic reverse lock through reverse gear or manually - Axle tools - Tyres: 235/75 R 17.5 Brake System: - Brake system in accordance with EU regulations with EBS-E (4S3M) Steel Construction: - Steel construction made from high-strength fine-grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Paintwork: - Premium and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc-rich primer - High-quality 2-component (2K) topcoat in single-tone Novagrey Bedeh Etf Rspfx Advowl Electrical System: - Electrical system according to EU regulations, ASPÖCK-NORDIK (ASS3) 24 Volt lighting - ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets Included Accessories: - 2" king pin - One galvanized steel front wall, approx. 400 mm high - One spare wheel with holder in front of the front wall - Yellow and red air couplings on galvanized front terminal strip - 4 wheel chocks with holder on the front wall - Mounting at the rear of the gooseneck for ALU approach ramps - Galvanized folding supports under the chamfered loading area - Bracket for a rotating beacon - Cover plates to bridge the gap between ramps and loading area - White reflective tape according to EU regulations on the sides, red at the rear and on the extension - Electro-hydraulic power unit - At the gooseneck and on the ramps, left and right, each with mounting for warning panels including socket - Control valves for the ramps mounted on the right side of the semi-trailer - Mudflap at the rear of the trailer - User manual and description on USB stick - Removable ALU side boards and rear panel on the gooseneck, approx. 2,440 x 400 mm - Rear galvanized stanchions removable (body length approx. 2,560 mm) - 4 pairs of WADER container pockets in the loading area for a 20 ft, 2x 20 ft or a 40 ft container - 7 pairs of stake pockets for 100 x 50 mm stakes in the external frame of the loading area - Extensions, galvanized, retractable by approx. 230 mm per side - Lift axle on the front axle with control - 20 x 20 mm square climbing strips - BEKAMAX central lubrication system - Four warning panels extendable by approx. 400 mm (approx. 423 x 423 mm)

Stav: použitý, najazdené kilometre: 62 150 km, výkon: 130 kW (176,75 k), počet lôžok: 3, typ paliva: nafta, typ prevodu: mechanický, farba: biely, prvá registrácia: 07/2018, celková dĺžka: 7 770 mm, celková šírka: 2 340 mm, celková výška: 3 020 mm, konfigurácia náprav: 2 nápravy, emisná trieda: Euro 6, celková hmotnosť: 4 500 kg, Rok výroby: 2018, Výbava: ABS, centrálne zamykanie, elektronický stabilizačný program (ESP), klimatizácia, kúpeľňa, navigačný systém, nezávislé kúrenie, sadzový filter, Obytné vozidlo Carthago Chic I 4.9 L c-Chic 130KW/177PS II. generácie so 6-stupňovou manuálnou prevodovkou a rozsiahlym príplatkovým vybavením: * Motor / Podvozok: Fiat Ducato 2,3 l Multijet 180 * Výkon: 130 kW / 177 k * Prevodovka: 6-stupňová manuálna * Najazdené kilometre: 60 150 km * Povolená celková hmotnosť: 4500 kg * Lôžka: samostatné postele * Sediaca skupina: L-obývacia skupina s bočnou lavicou * Čalúnenie: sériová látka Venezia * Dekor dreva: sériový ----VOLITEĽNÁ VÝBAVA: * Super-paket * TV-paket 32" v obývacej časti, výsuvný zo sedačky * TV-paket 24" v spálni * Mediacenter s navigáciou a DAB+ * Kuchynský a kávový paket * Sky-Dream Comfort * Volant a hlavica radiacej páky v koži * 16" hliníkové disky Fiat "heavy" podvozok * Pneumatiky Michelin Agilis Camping M+S 225/75R16 * Navýšenie na 4,5 t * Prídavné vzduchové odpruženie Goldschmitt na zadnej náprave * Toaleta Thetford C260 s keramickou vložkou * Vetranie WC SOG cez strešný komín * Cúvacia kamera so 7" zabudovaným displejom Carthago * Solárny systém 2 x 100 WP * 2 nástavbové batérie po 80 Ah * Menič Puretronic Sinus 1500 W so zapojením všetkých zásuviek a prioritou siete * Automatická klimatizácia v kabíne vodiča * Strešná klimatizácia Truma Aventa s diaľkovým ovládaním * Strešná markíza Thule Omnistor Alu Natur, látka sivá, 5,0 m * Plne automatická satelitná anténa Teleco Classic 85 cm s Twin LNB * Hydraulický systém vyrovnávacích podperiek E&P Goldschmitt s dvojstupňovými teleskopickými valcami a oceľovými hadicami * LED denné svietenie * Hmlové svetlomety * Vonkajšie osvetlenie * Prémiové vstupné dvere s oknom, centrálnym zamykaním a sieťkou proti hmyzu * Rámové okná Seitz * Elektrický výsuvný schodík * Vonkajší úložný priestor na 2 x 11 kg plynové fľaše * Plynová prípojka pod vonkajším servisným vekom * Zadná garáž prístupná obojstranne (dvere V: 114 cm x Š: 104 cm) * Zadná garáž s osvetlením, vykurovateľná * Kotviace lišty v zadnej garáži * Otočné, výškovo a sklonom nastaviteľné pilotné sedadlá s polstrovanými lakťovými opierkami * Strešné okno nad kabínou vodiča * Bez výsuvnej postele nad kabínou vodiča, namiesto toho strešné úložné skrine * Elektricky nastaviteľné a vyhrievané vonkajšie spätné zrkadlá * Elektrické ovládanie okien * Posilňovač riadenia * Tempomat * Traction Plus * Asistent zjazdu z kopca * Airbag vodiča a spolujazdca * Remis zatemnenie kabíny * Velúrový koberec v kabíne vodiča * 4 trojbodové pásy * Posuvný jedálenský stôl * Panoramatické a bočné okná v dennej časti * Ambientné osvetlenie * Veľký kuchynský pult s 3-varičom, piezozapaľovaním, samostatným drezom a krytmi * Veľká chladnička Dometic s absorpciou, AES a samostatným mrazničkou v čiernej farbe Bwsdsxci Dzjpfx Advsl * Kuchynské výsuvy so soft-close * Kuchyňa s bočným a strešným oknom so strešným ventilátorom * Kuchyňu/obývačku možno oddeliť kúpeľňovými dverami * Plynové kúrenie Truma Combi s ovládaním CP Plus * Samostatné postele vzadu (200/190 cm x 85 cm, rozšíriteľné do šírky 215 cm) * Úložný priestor pod jednolôžkami * Spálňa s 2 bočnými a stropnými oknami * Samostatná kúpeľňa s umývadlom, WC a strešným oknom * Samostatná veľká sprcha s drevenou podlahou a strešným oknom * Zatemňovacie rolety / sieťky na všetkých oknách v dennej a spálňovej časti ----Udržiavané vozidlo od nefajčiara, 2. majiteľ, vo veľmi dobrom stave, bez poškodení! Všetky dodatočné úpravy zdokumentované faktúrami. Nová STK/EK pri predaji. Výhodné financovanie a možnosť výkupu! ----Zmeny a omyly vyhradené!

Stav: nový, pohotovostná hmotnosť: 9 400 kg, maximálna hmotnosť nákladu: 29 600 kg, celková hmotnosť: 39 000 kg, dĺžka ložného priestoru: 13 800 mm, šírka ložného priestoru: 2 550 mm, výška ložného priestoru: 850 mm, zavesenie: vzduch, veľkosť pneumatiky: 245/70 R 17.5, Výbava: ABS, NOVÝ, 3-nápravový podvalník Saf, 3. náprava riaditeľná, skrinka na náradie na krku, držiak rezervného kolesa, zadné dvojité hydraulické rampy 4000 x 800 mm s manuálnym priblížením, 3+3 kotviace oká RUD s certifikáciou na 10 ton namontované na 6+6 otvoroch, 2+2 kotviace oká CARTEC s certifikáciou na 8 ton na vyššej plošine, výška nízkej ložnej plochy 850 mm, dĺžka nízkej ložnej plochy 10 030 mm. Bsdpev Upfyofx Advswl

Stav: nový, pohotovostná hmotnosť: 22 700 kg, maximálna hmotnosť nákladu: 79 300 kg, celková hmotnosť: 102 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 11 000 mm, šírka ložného priestoru: 2 850 mm, výška ložného priestoru: 920 mm, veľkosť pneumatiky: 245/70 R 17.5, farba: sivý, prevádzková hmotnosť: 22 700 kg, Výbava: ABS, Swan neck: - Swan neck in SNT design for optimizing the loading platform length, approx. 3,750 mm long, with rear chamfer approx. 850 mm x 10° - Hydraulically raisable and lowerable, lifting stroke ± 250 mm including hydraulic connection linked to the hydraulic axle compensation of the first two axles - Open at the rear third - Suitable for tractor units: 6 x 4 and 8 x 4 Loading platform: Bwedpfx Ajk Af Svjdvel - Extendable loading platform, approx. 11,000 mm long with rear chamfer approx. 500 mm x 10°. - Recess in the loading platform including in the bevel for accommodating the excavator bucket arm, approx. 4,240 x 900 x 440 mm - Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the respective platform length Ramps: - Pair of two-part steel ramps, approx. 4,650 mm long and 900 mm wide - Hydraulically foldable ramp tips - Ramps hydraulically adjustable sideways approx. 235 mm outward and approx. 215 mm inward, individually - "Super Grip" rubber surface 25 mm and steel plate approx. 5 mm as additional reinforcement on the loading platform bevel - Rectangular climbing strips 20x30 mm, approx. every 200 mm on the outer ramp frame Axles, suspension and tyres: - PA-X axle system, all axles force-steered hydro-mechanically - Steering behavior of the first two axles can be optimally adjusted to the loading platform length, both mechanically and hydraulically - Hose rupture valve on the axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pins for securing in raised position - 245/70 R 17.5 3PMSF Accessories included: - Removable steel front wall, approx. 400 mm high - Supply line connection strip for tractor unit, mounted at the height of the outer frame profile - 1 spare wheel - Outer beams of the swan neck with mounting holes for screwable lashing rings - First hole approx. 200 mm from front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - Tread plate covering over the swan neck - On the swan neck, 1 pair of removable ALU side walls, approx. 400 mm high, anodized - Removable ALU rear wall on the swan neck, approx. 400 mm high, anodized - 3.5" king pin / 2" king pin mounted - Guide plate on the swan neck for the fifth wheel, approx. 500 mm wide - 4 wheel chocks - 4 axle load gauges - Mechanical drop supports at the front - 1-piece INOX toolbox, approx. 2,480 x 340 x 390 mm - Mechanical drop supports at the front - Continuous steel plate covering on the loading platform with painted-on sand layer as slip protection - 1 intermediate table, approx. 500 mm wide, for extension, with elongated holes for insertable and repositionable bridging elements - Painted-on sand coating on the support surfaces of the intermediate table - Mechanical lock for locking the intermediate table when extended - 8 pairs of stake pockets in the outer frame - Extendable galvanized widening sections, approx. 230 mm per side - 1 pair of hydraulic rear supports - Central lubrication system - 1 reversing spotlight each on the left and right at the rear of the vehicle - 3 kW electric-hydraulic power unit - Loose widening planks in reinforced steel U-profile frame - Radio and cable remote control - 4 warning signs, approx. 423 x 423 mm

Stav: nový, pohotovostná hmotnosť: 15 420 kg, maximálna hmotnosť nákladu: 61 080 kg, celková hmotnosť: 76 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 900 mm, veľkosť pneumatiky: 235/75/r17,5, farba: sivý, Výbava: ABS, Gooseneck: Gooseneck with rear bevel of approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading Area: Extendable loading area with rear bevel of approx. 500 mm x 8° 8 pairs of folding outward lashing rings 1 pair of flat lashing rings at the front of the loading area Cutouts in the outer frame of the loading area for securing load straps Approx. 48 mm thick hardwood flooring, non-slip checker plate cover above the axles Two-piece Steel Ramps: One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering. Ramp parts are hydraulically foldable, equipped with hydraulic lifting mechanism and hydraulic lateral adjustment. Maximum load per pair: 50,000 kg. Landing Legs: • JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: BPW axles and suspension, 4th and 5th axle steering Technical axle load: 12,000 kg 4th and 5th axles with electromagnetic reverse lock activated via reverse gear and manual operation Tyres 235/75 R 17.5 3PMSF Braking System: Braking system according to EU regulations with EBS-E (4S3M) Sockets and Lighting: Electrical system according to EU regulations, 24-volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets Connections according to ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paintwork: Bwsdpfx Adol Sl Izjvsl First-class and durable corrosion protection, achieved by standard shot-blasted welded frame with a 2-component (2K) zinc dust primer High-quality single color 2-component (2K) topcoat in MB 7350 Novagrau Rear section metallized and painted in RAL 9010 (Pure White) Metallic lacquer not available Steel Structure: Steel construction made from high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Accessories: One spare wheel with bracket in front of the bulkhead 2" kingpin Galvanized steel front wall approx. 400 mm high Yellow-red air couplings on the galvanized front connector strip 2 wheel chocks with holders on the front wall Provision at the rear of the gooseneck for ALU drive-on ramps Bracket for a beacon at the rear of the trailer Galvanized supports under the rear bevel of the loading area White reflector tape according to EU regulations on the sides, at the extension and rear red Electro-hydraulic unit at the rear under the loading area On gooseneck and rear panel (left and right) bracket for warning signs incl. socket Control valves for the ramps installed on the right side of the trailer A mud flap at the rear of the trailer Manual and description on USB stick 3.5" kingpin supplied loose On the gooseneck, plug-in ALU side walls and rear wall approx. 2,440 x 400 mm (LxH) Rear galvanized plug-in stakes are removable (Length of the structure approx. 2,560 mm) 3 pairs of WADER container pockets on the loading area for one 20' (30') or a 40' container 6 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading area Galvanized extensions, extendable by approx. 230 mm per side Lifting axle on the front axle, control via TEBS-E depending on current axle load and loading status Square climb strips 20 x 20 mm, every 200 mm on the outer frame of the loading area bevel On the checker plates, above the kingpin and the loa

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, číslo stroja/vozidla: VAVJS1339PH522406, pohotovostná hmotnosť: 8 520 kg, maximálna hmotnosť nákladu: 30 480 kg, celková hmotnosť: 39 000 kg, prvá registrácia: 01/2024, dĺžka ložného priestoru: 13 500 mm, zavesenie: vzduch, veľkosť pneumatiky: 385/55 R22.5, farba: žltá, Rok výroby: 2024, Výbava: ABS, LOCATION: 73230 Kirchheim unter Teck - 3-AXLE CONSTRUCTION MATERIAL FLATBED SEMITRAILER RH230 – forced steering Vehicle ID No.: VAVJS1339PH522406 Mileage: 7,700 km - Weights Gross weight (technical): 39 t Axle unit weight (technical): 27 t Fifth wheel load (technical): 12 t DIMENSIONS Internal length approx. 13,500 mm Internal width approx. 2,480 mm Total width max. 2,550 mm Loading height front approx. 230 mm above ASH = approx. 1,360 mm Fifth wheel height unladen approx. 1,130 mm CHASSIS - Welded steel frame construction - Reinforced for 20 t load at the center across 4 m loading length - Frame height at front approx. 230 mm - Interchangeable 2" king pin - Frame designed for fifth wheel height unladen approx. 1,120 mm – 1,200 mm (with air-suspended tractor unit) - Outer frame with 4 mm perforated strip, hole center spacing approx. 100 mm, long hole 50/30 mm, for lashing points rated at 3.5 t each - 10 pairs of 5 t folding lashing rings, recessed into the floor, can be folded up and outward - 8 pairs of square tube inserts with sockets for 80x80 mm stanchions, on both sides of the outer frame - 6 crosswise square tube inserts with sockets for 80x80 mm stanchions across the full width, max. tensile force 2000 daN AXLES Bwedpfxoxq S H Ij Advjl - BPW EcoDisc axles with disc brakes Ø430 mm (22.5" disc) - Load capacity 9 t/axle, on-road version - 1st axle rigid - 2nd and 3rd axles with bogie mount for forced steering STEERING - Forced steering "Tridec TR" on two turntable-steered axles for heavy-duty use - Automatic forced steering, front saddle turntable with steering wedge - Transmission via two steering rods, rear axle installation with bogie - Central lubrication points for steering on the front saddle turntable and on the rear bogie - Axle lift on first axle, lifts and lowers automatically depending on load, starting assist with speed limitation BRAKING SYSTEM / SUSPENSION - EBS system 2S2M, one axle sensor-equipped - RSS/RSP – Stability program - Spring actuator parking brake on 2 axles - Aluminium air tanks - Brake/air connections with Quattromatic quick couplings - EBS/ABS socket in front - Air suspension with lift and lower device, total lift approx. 200 mm - Automatic adjustment to programmed ride height from 15 km/h ASSISTANCE / SAFETY SYSTEMS - Axle load display via EBS CAN bus signal for display in the driver's cab - Wabco SmartBoard for reading data via display (mileage, axle unit load, brake diagnostics, etc.) FLOOR - 27 mm screen-printed plywood floor with steel hat-profile stringers over the longitudinal beams - Floor load capacity 7,200 kg forklift axle load ACCESSORIES / GENERAL - Aluminium forklift protection strip bolted to both sides of the outer frame - Aluminium forklift protection strip, rear crosswise - Closed special steel tool box by Schoch, black-coated approx. 3,340 mm long, approx. 2,480 mm wide, approx. 500 mm high, loadable up to approx. 1 t, asymmetrical with doors on both sides - Galvanised steel tool box / lid painted single-color - 8 plug-in hardwood crossbeams approx. 100/100 mm, steel-edged, fixable in the outer frame sockets Very good condition, German registration documents, immediately available.

Stav: nový, pohotovostná hmotnosť: 10 700 kg, maximálna hmotnosť nákladu: 38 800 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 r 17,5, farba: sivo-čierny, Výbava: ABS, Gooseneck: •Gooseneck with beveled front corners at 45° and rear chamfer approx. 750 mm x 10° •3 pairs of lash rings •30 mm thick hardwood decking Extendable Load Platform: •Extendable load platform with rear chamfer approx. 1,000 mm x 8° •Cut-outs in the outer frame of the load platform for attaching lashing straps •Approx. 48 mm thick hardwood decking, over the axles with chequer plate covering Two-piece Steel Ramps: •One pair of galvanized, two-piece steel ramps with approx. 48 mm thick hardwood covering •Ramps with hydraulically foldable ramp sections, hydraulic lifting system, and hydraulic lateral adjustment •Maximum capacity per pair: approx. 40,000 kg Axles and Tyres: •BPW axles and suspension, 2 rigid axles, 1 trailing steering axle •Technical axle load: 12,000 kg •Electromagnetic reverse lock, activated via reverse gear and manually •Air suspension with lift and lower valve •Axle tools •235/75 R 17.5 3PMSF Bjdshlz S Nspfx Advswl Braking System: •WABCO braking system according to EU regulations with EBS-E Paintwork: •First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component zinc dust primer •High-quality, single-tone 2-component topcoat in MB 7350 Novagrau •Rear section metalized and painted in RAL 9010 Landing Legs: •JOST landing gear with 2-speed gearbox for 24 t lifting capacity (50 t test load). Steel Construction: •Steel construction made from high-strength fine-grained steels •Steel grades: •S355J2+N/S355MC •S690QL/S700MC Electrical System: •Electrical system complying with EU regulations, 24 volt lighting •ASPÖCK-UNIBOX on the front connection board with 24N, 24S & 15-pin sockets Accessories Included: •One spare wheel with holder •One galvanized steel front wall approx. 400 mm high •Yellow-red air couplings on the galvanized front connection board •4 wheel chocks •A holder for a warning beacon at the rear of the trailer •Recess in the rear gooseneck area for ALU approach ramps •Galvanized folding supports under the chamfer of the load platform •Cover plates to bridge the gap between the ramps and the load platform •White reflective tape as per EU regulations on the sides, extension, and rear (red) •Electro-hydraulic unit at the rear, under the load platform •One holder each on the gooseneck and on each ramp, left and right, for warning signs incl. socket •Ramp control valves mounted on the right-hand side of the trailer •On the gooseneck, ALU side and rear boards approx. 2,440 x 400 mm •Rear galvanized plug-in stakes are removable (body length approx. 2,560 mm) •Four warning panels, extendable by approx. 400 mm, each with a position light •3 pairs of WADER container pockets in the platform for a 20ft, 30ft, or 40ft container •6 pairs of stake pockets (100x50 mm) in the outer frame of the load platform •Galvanized extensions, extendable by approx. 230 mm per side •20 x 20 mm square toehold strips every 200 mm on the outer frame of the platform chamfer •Sanded surface finish painted on the chequer plates, king pin, and load platform as anti-slip protection •Load gauge for determination of axle loads, including load diagram •HRM metallization (High Resistance Metallisation) of the outer frame •Complete steel structure shot-blasted, then the defined visible areas metallized with ZINACOR 850 (zinc 85% - aluminium 15%) by hot finish

Stav: veľmi dobrý (použitý), konfigurácia náprav: 3 nápravy, povolené zaťaženie nápravy (náprava 1): 10 000 kg, dovolené zaťaženie nápravy (náprava 2): 10 000 kg, povolené zaťaženie nápravy (náprava 3): 10 000 kg, dĺžka ložného priestoru: 16 200 mm, šírka ložného priestoru: 2 750 mm, výška ložného priestoru: 960 mm, celková dĺžka: 16 200 mm, celková šírka: 2 750 mm, zavesenie: hydraulika, veľkosť pneumatiky: 235 / 75 R17.5, farba: modrá, Rok výroby: 2009, Details Chassis Number: WSTZH8D90030493 Bjdpfowwkrlsx Advowl Type: Trailers Year: 2009 Brand: Goldhofer Additional Information Main Features Manufacturer: Goldhofer Model: STZ H8-82-80A Chassis Number: WSTZH8D90030493 Year: 2009 Weights Fifth Wheel Load: 26,000 kg Axle Load: 10,000 kg Total Axle Load: 8 x 10,000 kg = 80,000 kg Gross Vehicle Weight: 106,000 kg Unladen Weight: 23,480 kg Payload Capacity: 82,520 kg Axles Axle Brand: BPW Hydraulic Suspension WABCO Braking System with EBS ABS 1st Axle: Friction Steered 2nd Axle: Rigid Axles 3 to 8: Hydraulically Steered Axle 1 & 2: Liftable Tyres: 235 / 75 R17.5 Dimensions Length: 16,200 mm Extensions: 8,300 mm Maximum Extended Length: 24,500 mm Loading Platform Length: 12,300 mm to 20,600 mm Loading Platform Width: 2,750 mm Loading Platform Height: 955 mm King-Pin Height: +/- 1,280 mm Additional Equipment Operated via tractor hydraulics Hydraulically operated gooseneck Lashing rings Stake pockets Timber loading platform Mechanical landing gear Toolbox integrated in gooseneck King-pin 3.5” Central lubrication Oversize load marker boards Radio remote control = Further Information = General Information Year of Manufacture: 2009 Axle Configuration Tyre Size: 235 / 75 R17.5 Axle Brand: BPW Suspension: Hydraulic suspension Rear Axle 1: Twin tires; Lift axle; Max. axle load: 10,000 kg; Steered Rear Axle 2: Twin tires; Lift axle; Max. axle load: 10,000 kg Rear Axle 3: Twin tires; Max. axle load: 10,000 kg; Steered Rear Axle 4: Twin tires; Max. axle load: 10,000 kg; Steered Rear Axle 5: Twin tires; Max. axle load: 10,000 kg; Steered Rear Axle 6: Twin tires; Max. axle load: 10,000 kg; Steered Rear Axle 7: Twin tires; Max. axle load: 10,000 kg; Steered Rear Axle 8: Twin tires; Max. axle load: 10,000 kg; Steered Weights Unladen Weight: 23,480 kg Payload: 82,520 kg Gross Vehicle Weight: 106,000 kg Features Loading Platform Height: 96 cm Extendable Chassis: Yes Condition Technical Condition: Very Good Cosmetic Condition: Very Good Financial Information Price: On request Further Information Please contact Stefan Schaapveld for more information.

Stav: použitý, Rok výroby: 2025, farba: sivo-čierny, pohotovostná hmotnosť: 4 kg, prvá registrácia: 10/2025, typ paliva: benzín, typ prevodu: mechanický, NÁZOV: POUŽITÝ OTVORENÝ VÝMENNÝ KONTAJNER NA OBJEMNÝ ODPAD Z HARDOXU S OBVODOVÝM KAMENNÝM VYSEKANÍM A NOSNÍKMI 200 MM, ZADNÉ OTVÁRANIE S DVOJKRÍDLOVÝMI DVERE + ŽERIAV JONSERED A 6-ČEPEĽOVÝ POLYPGRAB REF: 25-U-147 TYPOLÓGIA: kontajner na objemný odpad so žeriavom NOVÝ: nie VRCHNÁK: nie OTVÁRANIE: zadné, s dvomi skladacími dverami ROZMERY CELKOVÁ VONKAJŠIA DĹŽKA: 6,45 m VONKAJŠIA DĹŽKA NÁDRŽE: 5,45 m + 1,00 m priestor pre žeriav VONKAJŠIA ŠÍRKA NÁDRŽE: 2,50 m VNÚTORNÁ / VONKAJŠIA VÝŠKA NÁDRŽE: 1,90 m / 2,10 m OBJEM: 24 m³ HMOTNOSŤ: 6 100 kg Bwsdjvp Szyspfx Advol PODLAHA: 5 mm STENY: 4 mm FARBA: modrá ÚDAJE O ŽERIAVE ZNAČKA: JONSERED 1300R s joystickom a pedálmi MTH: 1237 ROK: 2001 DĹŽKA: 8,30 m s hydraulickými podperami VÝSUVY: 1 NOSNOSŤ: max. 1 520 kg na konci ramena Vylúčenie zodpovednosti za chyby a opomenutia. Uvedené ceny sú bez DPH. Pre aktuálnu cenovú ponuku a podmienky kontaktujte obchodné oddelenie. Viac informácií: Loris: 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA pôsobí v oblasti predaja a nákupu priemyselných a úžitkových vozidiel, najmä so zameraním na segment odpadového hospodárstva. Špecializovaní na nákladné vozidlá, prívesy a výmenné nadstavby. S vozovým parkom s viac ako 50 pripravenými nákladnými vozidlami a vyše 150 korbami, kontajnermi s a bez výmenného žeriava. Vyhradzujeme si právo na zmeny, chyby a omyly. Vzhľadom na množstvo inzerátov a detailov odporúča spoločnosť Aurora overiť správnosť údajov s predajným tímom.

Stav: nový, maximálna hmotnosť nákladu: 30 190 kg, celková hmotnosť: 43 000 kg, konfigurácia náprav: 2 nápravy, Výbava: ABS, You can find our complete range of immediately and short-term available vehicles on our website. Excerpt from the equipment list. Full specification available upon request. Loading platform: - Low bed with externally mounted beams, extendable in SUPER LOW design, approx. 6,850 mm long - Low bed with fixed hardwood floor, approx. 40 mm thick, with mechanical locking - Supply lines are protected within the extendable beams and automatically adjust to the current low bed length - 5 pairs of outward-folding lashing rings (LC 10,000 daN) - 6 pairs of threaded blocks on the inner beam for mounting screw-in RUD rings Gooseneck: - Gooseneck in SNT design for optimum loading length, approx. 3,750 mm long - Gooseneck hydraulically lift/lowerable and removable - Technical fifth-wheel load: 23,000 kg - Suitable for tractor units (4x2, 6x2) Rear chassis: - Rear chassis in short design with closed outer frame and chequer plate cover - Chassis with excavator recess, closed at the rear section for housing air tanks - 2 pairs of outward-folding lashing rings (LC 5,000 daN) - 1 pair of outward-folding lashing rings (LC 10,000 daN) - 1 pair of horizontal lashing rings at front & rear of the chassis (LC 10,000 daN) Axles: - BPW axles with hydro-mechanical forced steering - Technical axle load: 12,000 kg each - Air suspension with lift/lower valve Bedpfxjxarl Nj Advjwl Tyres: - 245/70 R 17.5 3PMSF tyres, brand of our choice - Load index (146/146F) - TPMS tyre pressure monitoring system (ECE R 141 compliant) - Data transfer to tractor via standardised EBS interface per ISO 11992 - For proper display, the tractor unit must be able to transmit and display these data Brake system: - Brake system compliant with EU regulations with EBS-E (2S2M) Electrical system: - Electrical system per EU regulations, lighting 24 V ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX at the front wiring harness with sockets 24N, 24S & 15 pin according to ISO: 24N ISO-1185, 24S ISO-3731, 15 pin ISO-12098 Steel construction: - Steel structure made of high-strength fine-grained steels - Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: - Entire steel structure automatically shot-blasted after welding - Second blasting with corundum for optimal coating adhesion - Whole vehicle chassis metalized with ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection - Final coat with 2 layers of 2K topcoat, single-colour in RAL 3002 Carmine Red, per RAL system 841GL - Rims in silver - Rear section metalized and painted in RAL 9010 (Pure White) - No metallic finishes possible - Paint structure salt spray-tested per ISO 9227-NSS - Cavities sealed with special wax Includes the following additional equipment: - 2-inch king pin - One galvanized steel front wall, approx. 400 mm high - Remote steering at front and rear via cable remote control with push buttons, incl. single-wheel tracking (without installation in tractor unit) - Hydraulic connections from gooseneck to low bed via multi-coupling instead of screw couplings - Electro-hydraulic power unit - Preparation for mounting screwed container locks for one 20' or one 40' container on the outer beams - No container locks included