Goldhofer Stz-Vl4, 4 Achs Teletieflader, Tiefbett, kúpiť použité (41 555)

Stav: použitý, najazdené kilometre: 211 033 km, výkon: 331 kW (450,03 k), prvá registrácia: 03/2016, typ paliva: nafta, celková hmotnosť: 32 000 kg, konfigurácia náprav: 3 nápravy, ďalšia kontrola (TÜV): 04/2027, brzdy: retardér, farba: oranžová, typ prevodu: automatický, emisná trieda: Euro 6, objem nakladacieho priestoru: 14 m³, dĺžka ložného priestoru: 5 600 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 1 050 mm, Výbava: ABS, klimatizácia, navigačný systém, nezávislé kúrenie, * Slnečná clona * ABS * TCS systém kontroly trakcie * Rádio * Navigačný systém * Palubný počítač * Cúvacia kamera * Tempomat * Vzduchové klaksóny * Elektrické ovládanie okien * Elektricky nastaviteľné zrkadlá * Vyhrievanie zrkadiel * Centrálne zamykanie * Hmlové svetlomety * Strešné okno * Zadné okno Kjdpfx Ansy Tq Tzevona * Komfortné sedadlo vodiča * Vyhrievanie sedadla * Pozdĺžna a priečna uzávierka diferenciálu * AP nápravy * Oceľový nárazník * Výstražný maják oranžový * Výfuk za kabínou vodiča * Sklopná ochrana proti podbehnutiu * Nezávislé kúrenie (stacionárne kúrenie) * Asistent rozjazdu do kopca * Chladiaci box * Ťažné oko na manévrovanie * 12-stupňová prevodovka * Pruženie: listové * Užitočné zaťaženie: 18 060 kg * Trvalá brzda: retarder ----Nadstavba: Dautel trojstranný paletový sklápací nadstavba typ DK 4 (nominálne zaťaženie 24 500 kg), oceľová bočnica vľavo s bordmatikou, zvýšená oceľová čelná stena s ochranou proti bagru, oceľová zadná stena, zadný žľab, oceľová podlaha, upevňovacie oká, pravá bočnica z hliníka. Predaj iba podnikateľom. PRI EXPORTE SA PLATÍ IBA CENA BEZ DPH!!!!! VŠETKY ÚDAJE SÚ BEZ ZÁRUKY, VRÁTANE VÝBAVY A PRÍSLUŠENSTVA. Základom všetkých kúpnych zmlúv, faktúr, proforma faktúr, objednávok a predajných rozhovorov sú naše VOP (viď tiráž).

Stav: nový, maximálna hmotnosť nákladu: 31 920 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 10 410 mm, šírka ložného priestoru: 2 500 mm, výška ložného priestoru: 900 mm, celková šírka: 2 550 mm, Nové vozidlo Fliegl nízkoložný príves so 4 nápravami a nájazdovými rampami, typ VTS 400 Ksdpevv D Ixefx Anvjna Celková hmotnosť: 24 000 kg / 40 000 kg Pohotovostná hmotnosť: 8 080 kg Užitočné zaťaženie: 15 920 kg / 31 920 kg Celková dĺžka: 11 940 mm Nakladacia dĺžka: celkom cca 10 410 mm, znížená časť cca 2 490 mm, ložná plocha vrátane zadného skosenia cca 7 920 mm Šírka: 2 550 mm Nakladacia výška: 900 mm Ďalšie informácie Príplatok za dopravu / prípravu zo skladu 26639 Wiesmoor: 1 280,00 EUR bez DPH Leasingová ponuka: doba trvania 48 mesiacov, akontácia len DPH, zostatková hodnota 40 % mesačná splátka: 759,00 EUR Podvozok nízkoložného prívesu Oceľová zváraná konštrukcia Otočný čap s robustným ložiskovým krúžkom Skopné zadné podpery 2 zakladacie kliny s držiakom Bočná ochrana z hliníka Zadná blatníková lišta po celej šírke Polovičné blatníky na 1. a 2. náprave s protišpliechacími zásterkami za každou nápravou, protišpliechacie zásterky pred a za 3. a 4. nápravou Výrez pre násadu bagra nad zadnými nápravami až po koniec prívesu, cca 1 800 mm dĺžka, cca 650 mm šírka a cca 150 mm hĺbka 2 páry zaťažovacích otvorov po 5 t v priestore na násadu bagra po bokoch pozdĺžneho rámu, cca 300 mm odpredu a cca 200 mm pred zadným skosením 1 plastový uzamykateľný náradový box, š=600 mm / v=425 mm / h=460 mm Skladovací box v zníženej časti podlahy s vekom, Š=720 mm / D=520 mm / H=170 mm Rozšírenie vysúvateľné na 3 000 mm (nie v zadnom skosení) (Rozchod prepravovaných stavebných strojov resp. vozidiel nesmie prečnievať cez vonkajšiu šírku rámu 2 550 mm) Úložný priestor na drevené hranoly pod ložnou plochou Drevené hranoly 70 mm pre rozšírenie na 3 000 mm Kotviace oká na nízkoložnom prívesu 1 pár kotviacich výrezov vo vnútornom nosníku vpredu (znížená časť), každé po 10 t 4 páry otvorov na vonkajšom ráme, každé po 5 t (uchytenie napínacích pásov) 9 párov kotviacich húb zvrchu a zboku vo vonkajšom ráme po 10 t 2 × vpredu na zníženej časti 7 × v ložnej časti Prvé kotviace oko 250 mm odpredu, posledné max. 250 mm odzadu, rozstup nie väčší ako 1 100 mm 3 páry výklopných kotviacich ôk navyše, po 10 t 1 × na zníženej časti (vystupuje) 1 × začiatok ložnej plochy vnútri pri nosníkoch 1 × za poslednou nápravou v podlahe Ťažné zariadenie pre príves s otočným čapom Ťažná tyč so schváleným 50 mm ťažným okom Nastavenie výšky ťažnej tyče cez pružinu Nápravy a odpruženie Bubnové nápravy podľa výberu výrobcu „Nápravy/podvozok laserovo zmerané" – znižuje opotrebenie pneumatík a spotrebu paliva Vzduchové odpruženie so zdvíhacím a znížovacím ventilom + automatická resetovacia funkcia Kolesá a pneumatiky 235 / 75 R 17,5" podľa výberu výrobcu Oceľové disky v dvojmontáži, výrobná strieborná farba Brzdový systém Dvojokruhový vzduchotlakový brzdový systém Pružinová parkovacia brzda Detekcia zaťaženia nápravy cez EBS-Canbus signál, pre zobrazenie na displeji v kabíne vodiča, nákladné vozidlo musí byť príslušne pripravené, nie je nainštalované v LKW (nie je overená váha) Systém stability jazdy vozidla 2 zameniteľné spojovacie hlavy vpredu s prepojovacími vedeniami k ťažnému vozidlu 12-24 Volt EBS, elektronický brzdový systém s EBS konektorom vpredu a prepojovacím káblom Značka Knorr Pozor: Príves sa smie ťahať len ťažnými vozidlami, ktoré zabezpečujú funkciu ABS! Elektrická výbava 12-24 Volt, viackamrové LED svetlá, na bokoch žlté LED osvetlenie, LED osvetlenie ŠPZ (Poznámka! Pri niektorých ťažných vozidlách môže dochádzať k chybným hláseniam, aj keď funkcia je zabezpečená) 2 biele pozičné sve

Stav: nový, maximálna hmotnosť nákladu: 31 920 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 10 410 mm, šírka ložného priestoru: 2 500 mm, výška ložného priestoru: 900 mm, celková šírka: 2 550 mm, New Fliegl 4-Axle Low Loader Trailer with Ramps, Type VTS 400 Gross weight: 24,000kg / 40,000kg Unladen weight: 8,080kg Payload: 15,920kg / 31,920kg Overall length: 11,940mm Loading length: total approx. 10,410mm, gooseneck approx. 2,490mm, loading area incl. rear chamfer approx. 7,920mm Width: 2,550mm Loading height: 900mm Additional Information plus pre-carriage / provision ex yard 26639 Wiesmoor €1,280.00 / net Chassis low loader trailer Kjdpfoxrx Nlsx Anvena Steel welded construction Turntable with robust ball race ring Foldable rear support 2 wheel chocks with holders Aluminium side underrun protection Full-width rear mudflap Half-shell mudguards on axles 1 and 2 with anti-spray mudflaps behind each axle Anti-spray mudflaps in front of and behind axles 3 and 4 Excavator stick trough above rear axles extending to rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep 2 pairs of lashing holes, each 5 t, in excavator trough on the longitudinal frame approx. 300 mm from the front and approx. 200 mm before rear slope 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Storage box on the gooseneck, flush-mounted with lid, W=720 mm / L=520 mm / D=170 mm Extendable load width to 3,000 mm (not in rear slope) (Note: Track width of machines/vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for timber beams underneath the low loader deck 70 mm timber beams for extension to 3,000 mm Low loader lashing points 1 pair tie-down cutouts in the longitudinal beam front, integrated in gooseneck, each 10 t 4 pairs of lashing holes in the outer frame, each 5 t (for securing straps) 9 pairs of lashing mushrooms, top and side mounted in outer frame, each 10 t 2 x on the gooseneck 7 x in the low bed area First tie-down point 250 mm from front and last max. 250 mm from rear, spacing not greater than 1,100 mm 3 additional pairs of folding lashing rings, each 10 t 1 x on gooseneck (protruding) 1 x at start of low bed, integrated in longitudinal members 1 x behind last axle, integrated in floor Trailer coupling device, turntable Drawbar with tested 50 mm towing eye Drawbar height adjustable via spring Axles & Suspension Drum brake axles, manufacturer’s choice "Axles/chassis laser measured" to reduce tire wear and fuel consumption Air suspension with raise & lower valve + auto-reset function Wheels and tyres 235/75 R 17.5" manufacturer’s choice Steel rims, dual configuration, factory silver Brake system 2-line compressed air braking system Spring-loaded parking brake Axle load detection via EBS CAN bus signal, for display in the cab (truck must be pre-equipped, no truck installation/no calibrated scale) Vehicle – Driving Stability System 2 anti-mix-up coupling heads at the front with connecting lines to the towing vehicle 12-24 Volt EBS, electronic braking system with EBS plug at front and connection cable Brand: Knorr Note: This trailer may only be towed by vehicles ensuring the effectiveness of the ABS! Electrics 12-24 Volt, multi-chamber LED lights, side yellow LED marker lights, number plate in LED (Note! With some towing vehicles, incorrect diagnostics may occur despite functioning properly) 2 front white position lights in LED 2 white/red lane marker lights at rear in LED 2 x 7-pin anti-mix-up plugs at front with connecting cable 1 LED beacon light with holder, switched via parking light (removable lamp)

Stav: nový, maximálna hmotnosť nákladu: 31 100 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 10 410 mm, šírka ložného priestoru: 2 500 mm, výška ložného priestoru: 900 mm, celková šírka: 2 520 mm, Total weight: 24,000 kg / 40,000 kg Unladen weight: 8,900 kg Payload: 15,100 kg / 31,100 kg Overall length: 11,940 mm Loading length: 10,410 mm total, 2,490 mm gooseneck, 7,920 mm loading bed including rear slope Width: 2,520 mm Loading height: 900 mm Further information: Plus pre-carriage / provision ex stock location 26639 Wiesmoor: €1,280.00 / net Steel welded construction Turntable with robust ball race Foldable rear support stands Wheel chocks with holders Aluminum side underrun protection Full-width rear mudflaps (not in combination with forklift holder) Half-shell mudguards 1st & 2nd axle with anti-spray mudflaps behind each axle Anti-spray mudflaps in front of and behind 3rd and 4th axle Digger boom trough over the rear axles, starting to the rear, approx. 1,800 mm long, approx. 650 mm wide, approx. 150 mm deep 2 pairs of lashing holes each rated 5 t in the digger trough, located on the side of the longitudinal frame approx. 300 mm from the front and approx. 200 mm before the rear slope 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable 1 storage box recessed in the floor at the gooseneck with cover, W=720 mm / L=520 mm / D=170 mm Extendable widenings to 3,000 mm (not in rear slope area) (The track width of construction machinery or vehicles to be transported must not exceed the outside frame width of 2,550 mm) Storage compartment for timber planks beneath the low-bed area 70 mm timber planks for widening to 3,000 mm Low loader lashing eyes 1 pair tie-down cutouts embedded in the main beam at the front of the gooseneck, each 10 t 4 pairs lashing holes in the outer frame, each 5 t (for ratchet strap attachment) 9 pairs of lashing mushrooms recessed in/outside the outer frame, each 10 t 2x located at the front on the gooseneck 7x in the low deck First lashing eye 250 mm from the front, last max. 250 mm from the rear, distance between lashing eyes not more than 1,100 mm Kedsrducpjpfx Anvjna 3 additional pairs of folding lashing eyes, each 10 t 1x on the gooseneck (protruding) 1x at the beginning of the low bed, inside the main beams 1x behind the last axle, recessed in the floor Towing device for turntable trailer Drawbar with certified 50 mm towing eye Drawbar height adjustment by spring Axles & suspension Drum brake axles, manufacturer’s choice “Axles/chassis laser-aligned” to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation, front and rear (equalizer balancing) Wheels and tires 235/75 R 17,5”, manufacturer’s choice Steel twin wheels, factory silver Brake system 2-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front with connections to the tractor unit 24 Volt ABS and ALB, with ABS plug at the front and connector cable Attention: The trailer may only be towed by vehicles that ensure the ABS is effective! Electrics 12–24 Volt, multi-chamber LED lights, side yellow LED lights, LED license plate light (Note! On certain towing vehicles, false diagnostics may occur despite full functionality) 2 white front position lights in LED 2 white/red lane marker lights rear in LED 2 x 7-pin non-interchangeable plugs at the front, with connector cable 1 LED beacon with bracket, controlled via parking/side light (removable beacon) 2 pairs of double warning panels, LED illuminated and extendable up to 3,000 mm Floor Gooseneck with steel chequer plate covering Followed by approx. 70 mm softwood flooring, steel cheque

Stav: použitý, konfigurácia náprav: 3 nápravy, prvá registrácia: 05/2008, * Výsuvný * Riadená náprava za jazdy * Hydraulické nakladacie rampy Kjdpfx Anjx I Uyhevena * Vzduchové odpruženie -----Interné číslo vozidla: 11555----Chyby a medzipredaj vyhradený WhatsApp podpora k dispozícii! V prípade otázok o vozidle alebo pre ďalšie informácie nás neváhajte kontaktovať cez WhatsApp WhatsApp Nemecky, Anglicky -- WhatsApp Nemecky, Anglicky, Arabsky

Stav: nový, pohotovostná hmotnosť: 9 650 kg, maximálna hmotnosť nákladu: 30 350 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 740 mm, šírka ložného priestoru: 2 550 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 r17,5 zoll, Rok výroby: 2026, Výbava: ABS, stredová otočná doska, 4-AXLE LOWBED TRAILER WITH TOP-LEVEL EQUIPMENT! => HOT-DIP GALVANIZED (CHASSIS FRAME, TURNTABLE FRAME, ACCESS RAMPS) Knodpohvxgzefx Anvsa => FULL AIR SUSPENSION => WITH LIFTING AND LOWERING FUNCTION (REAR AXLE UNIT!) => SAF LOWBED AXLES => LASHING PACKAGE => PERFORATED OUTER FRAME FOR ADDITIONAL LASHING POINTS => CLEAT STRIPS ON THE REAR OF THE ACCESS SLOPE => 6 LASHING POINTS IN THE EXCAVATOR SHOVEL WELL AT THE REAR END => LONG ONE-PIECE ACCESS RAMPS => SHALLOW RAMP ANGLE Perm. Gross Weight: 40,000 kg Payload approx. 30,350 kg Chassis frame hot-dip galvanized Turntable frame hot-dip galvanized Access ramps hot-dip galvanized Air suspension SAF axle with drum brakes EBS - Electronic Braking System Tires: 235/75R17.5 – 16 ply Lowbed length approx. 7,160 mm Excavator stick recess approx. 3,000 mm x 730 mm x 180 mm at rear lowbed 4 pairs of 10 t recessed lashing rings in the lowbed 2 pairs of 10 t recessed lashing rings in the highbed 4 pairs of 3 t lashing points on lowbed outer frame 3 pairs of 6 t lashing eyes on outer frame 4 pairs of stake pockets on highbed outer frame 4 pairs of stake pockets on lowbed outer frame 3-meter widening package with fold-out extensions (no taper) 4 x warning boards with lighting Rotating beacon at the rear LARGE STEEL TOOLBOX under the loading area 2 storage compartments with hinged lids in the high platform Hydraulic ramp lifters One-piece ramps approx. 3,150 x 750 mm Softwood flooring on loading area and ramps 40,000 kg gross weight only with special permit according to §70 => Delivery freight: €2.90 plus VAT per km => All prices ex works D-86368 Gersthofen Your direct contact: Mr. Hauptmann, Tel. DOLL VEHICLE MANUFACTURING *Subject to prior sale and changes!* *Price valid ex D-86368 Gersthofen* *Sales only to commercial customers!* *Pictures may differ and are for general guidance only => may show/contain optional accessories subject to surcharge*

Stav: nový, maximálna hmotnosť nákladu: 36 040 kg, celková hmotnosť: 53 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, Náš kompletný aktuálny vozový park so strojmi dostupnými ihneď aj v krátkodobom horizonte nájdete na našej webovej stránke. Výpis zo špecifikácie. Kompletné vybavenie na vyžiadanie. Labutia šija: * Labutia šija v dizajne SNT na optimalizáciu dĺžky ložnej plochy, dĺžka cca 3 750 mm * Labutia šija hydraulicky zdvíhateľná/spúšťateľná a zjazdná * Pre ťahače: 6 x 4 alebo 8 x 4 Nízka ložná plošina: * Nízka ložná plošina s vonkajšími nosníkmi, v predĺžiteľnom SUPER LOW dizajne, dĺžka cca 8 000 mm * Nízka ložná plošina s pevným tvrdodrevným dnom, hrúbka cca 40 mm a mechanické uzamykanie * Prívodné vedenia vedené bezpečne v predĺžiteľných nosníkoch, automaticky sa prispôsobujú dĺžke ložnej plochy * 7 párov sklopných upevňovacích krúžkov smerom von (LC 10 000 daN) * 6 párov závitových blokov na vnútornom nosníku na montáž skrutkovacích RUD-krúžkov Podvozok vzadu: * Podvozok vzadu s uzavretým vonkajším rámom a krytom z ryhovaného plechu * Podvozok s výrezom na bagre, v zadnej polovici uzavretý pre uloženie vzduchových nádrží * 3 páry sklopných upevňovacích krúžkov smerom von (LC 5 000 daN) * 1 pár sklopných upevňovacích krúžkov smerom von (LC 10 000 daN) * 1 pár ležiacich upevňovacích krúžkov, vpredu aj vzadu na podvozku (LC 10 000 daN) Nápravy: * BPW nápravy a zavesenie, všetky nápravy hydro-mechanicky nútene riadené * Technické zaťaženie nápravy: po 12 000 kg * Vzduchové odpruženie so zdvíhacím a spúšťacím ventilom Obutie: * Pneumatiky 245/70 R 17.5 3PMSF – podľa výberu výrobcu. Index nosnosti (146/146F) Brzdový systém: * Brzdový systém WABCO podľa noriem EÚ s EBS-E (2S2M) Lakovanie: * HRM metalizácia celého podvozka vozidla s ZINACOR 850 (85% zinok/15% hliník) pre najlepšiu ochranu proti korózii * Záverečný lak dvojvrstvový 2K vrchný lak, jednofarebný, v RAL 3002 karmínovo červená, podľa RAL systému 841GL Vrátane príslušenstva: * 2-palcový kráľovský čap * Pozinkovaná čelná stena z ocele, cca 400 mm vysoká * Na pozinkovanej spojovacej lište vpredu žlto-červené vzduchové spojky * Ovládanie riadenia náprav vpredu aj vzadu prostredníctvom káblového diaľkového ovládania s tlačidlami, s kontrolou stopového vedenia náprav (bez inštalácie do ťahača) * Príprava na montáž skrutkovacích držiakov kontajnerov pre 1 x 20', 1 x 40' alebo 1 x 45' kontajner na vonkajšie nosníky. Bez uzamykania kontajnera * Hydraulické prípojky z labutej šije k nízkej ložnej plošine s multikonektorom namiesto skrutkovacích spojok * Elektro-hydraulická jednotka * Špirálový kábel na napájanie elektro-hydraulickej jednotky a/alebo elektrického navijaka (cca 35 mm², cca 3,5 m dĺžka, max. 250A) medzi návesom a ťahačom so zásuvkou (NATO-NATO) * Žltý reflexný pás podľa EÚ noriem po bokoch, na výsuve a vzadu na návesu * Na labutej šiji a na zadnej časti vľavo aj vpravo držiak na výstražné tabule vrátane zásuvky * Príručka a popis na USB kľúči * Centrálne mazanie s 2 pumpami BEKAMAX (Pico) s bežným mazivom NLGI-2 a s odnímateľným krytom na pumpách * 7 párov závitových blokov medzi upevňovacími krúžkami pod horným pásom na vonkajšom nosníku pre montáž skrutkovacích RUD krúžkov VLBG-4 * Druhá jazdná výška, cca 50 mm nad bežnou polohou, ovládaná ručne * Demontovateľné ALU bočnice a zadná stena na labutej šiji, cca 2440 x 400 mm (dĺžka x výška). Zadné pozinkované zasúvacie stĺpiky sú odnímateľné (dĺžka nadstavby cca 2560 mm) * Samostatný vzduchový prípoj s vzduchovou pištoľou na labutej šiji Ksdsy Uwu Iepfx Anvsna * INOX náradový box, cca 1350 x 400 x 400 mm

Stav: použitý, maximálna hmotnosť nákladu: 21 130 kg, celková hmotnosť: 34 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 10/2024, ďalšia kontrola (TÜV): 11/2026, celková šírka: 2 540 mm, celková výška: 1 980 mm, Výbava: ABS, Kässbohrer SLL 2-axle low-bed trailer with hydraulic steering Highlight: Optionally available for rent as a complete combination with the depicted truck. Manufacturer: Kässbohrer Model / Vehicle Code: K.SLL 2 / 2H ? 18 / 20 Vehicle Type: Low-bed semi-trailer Country of Registration: Germany Brand: Kässbohrer Chassis Color: RAL 3020 Traffic Red Dimensions & Weights * Overall length: 13,210 mm * Overall width: 2,540 mm * Coupling height (H5): 1,250 mm * Platform height (unladen): 910 mm * Platform height (laden): 300 mm * Platform length: 6,810 mm * Extension: 5,550 mm * Gooseneck length: 3,600 mm * Rear swing door: 2,100 mm * Platform thickness: 200 mm * Wheelbase: 10,530 mm * Axle spacing: 1,360 mm * Unladen weight: approx. 12,873 kg (±3 %) * Gross weight (40 / 60 / 80 km/h): 42,000 kg * Axle load total: 24,000 kg * Permissible king pin load: 18,000 kg (40 / 60 / 80 km/h) Chassis & Axles * 2 axles * 2 hydraulically steered axles * Axles: BPW * Suspension: Air suspension * Suspension stroke: 260 mm (190 mm / -70 mm) * Additional raising of ride level by 40 mm possible * Load gauge for axle load display * Semi-automatic centering for steered axles with warning light sensor Braking System * WABCO EBS 2S/2M * ABS (Anti-lock Braking System) * RSS (Roll Stability Support) * Brake system according to UN ECE R13 Electrics & Lighting * 24V LED lighting system * 2 x 7-pin + 1 x 15-pin socket * LED brake lights * LED rear and fog lights * Electric system acc. to UN ECE R48 & ADR * LED work lights at rear (2 pcs, reverse gear-controlled) * LED beacon (1 pc) Tyres & Rims * Tyre size: 245/70 R17.5 * Tyres: M+S * 3PMSF (winter rated) * Tyre pressure monitoring system acc. to R141 * Number of wheels: 9 complete wheels * Rims: Steel rims (Kässbohrer’s choice) * Spare wheel bracket: 1 pc on gooseneck Steering & Operation * Hydraulic steering on both axles * Control panel in the vehicle * Remote control for external steering * Multifunctional WABCO Smartboard * Axle load indicator * Suspension control * Tyre and brake wear indication * Breakdown and system monitoring Chassis & Frame * High-strength steel S700 MC (ISO 1726) * Welded bogie-bed connection * Partial metallization (85% zinc / 15% aluminum) on outer frame & gooseneck * Adjustable and detachable gooseneck * 1 x 2 hydraulic cylinders, 220 bar operating pressure * King pin: 2 inch, bolted * King pin position: single Platform & Body * 3 removable platforms with hardwood flooring Knsdpfeycnbasx Anvja * Dimensions per platform: 100 x 1,300 x 2,115 mm * Weight per platform: 225 kg * 2 lashing rings per platform, each with 8,000 kg tensile strength * Platform widening: 225 mm, galvanized * Extension brackets: 12 x 2 pcs, galvanized Load Securing Lashing rings: * 1 x 2 pcs 13.4 t on gooseneck * 7 x 2 pcs 13.4 t * 4 x 2 pcs 8 t in low-bed * 2 x 2 pcs 13.4 t * 3 x 2 pcs 8 t on rear platform Stake pockets: * 6 x 2 pcs in well (50 x 100 mm) * 3 x 2 pcs at rear (50 x 100 mm) Accessories & Fittings * Aluminum front panel, gooseneck: 360 x 1,550 mm * Aluminum side walls: 360 x 1,900 mm * Aluminum rear wall: 360 x 2,480 mm * Toolboxes left & right (500 x 350 x 400 mm) * Centralized lubrication system * Side underrun protection acc. to ECE R73 * Warning

Stav: použitý, maximálna hmotnosť nákladu: 37 530 kg, celková hmotnosť: 50 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 02/2012, ďalšia kontrola (TÜV): 11/2026, celková šírka: 3 000 mm, celková výška: 3 780 mm, Výbava: ABS, * Swan neck with foldable side walls * Lowbed length: 11,950 mm - 15,450 mm * Lowbed extendable in steps by 3,500 mm * Lowbed width extendable by 460 mm * Hydraulically adjustable loading ramps (divided in two sections) * Stake pocket locations * Wabco SmartBoard * 4 axles with twin tires * 1st axle liftable * 3rd and 4th axles with trailing steering * Wheel chocks ----* Tire size: 235/75R17.5 * Technical gross vehicle weight: 58,000 kg * Curb weight: 12,470 kg Knedpfx Asy T Dyzjnvja * Overall length: 13,700–17,200 mm * Overall width: 2,540–3,000 mm * Safety inspection due: 05/2026 ----Vehicle number: 12062----Errors and prior sale excepted----Advertising and various lettering have been digitally removed.----We are happy to assist you with all the formalities involved in the purchase of a vehicle, with advice and practical support. Just let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional charge:----* Trade-in of your old vehicle * Main inspection/safety inspection * Complete export processing * Financing brokering * Application for export license plates * Vehicle delivery * Vehicle registration * Recovery services and vehicle transport ----YOUR VTS TEAM

Stav: nový, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, celková šírka: 2 530 mm, Rok výroby: 2025, Výbava: ABS, 2-axle self-steering trailer type M2K-9L * COMPACT steering system * Corrosion resistance through powder coating * All attachments bolted * Conventional wiring * Brackets and attachments in stainless steel or galvanized * 2 single axles, BPW, 10 t with disc brakes, including safety cables * Air suspension * Aluminum air tank * Bolster model IX with 1x mechanically telescoping stakes * Tires 275/70 R 22.5 on steel rims * EBS braking system * LED tail lights with integrated triangle reflector * 4x LED work lights (1,800 lumen) * Manual central lubrication * Paint: RAL 9011 graphite black * Payload approx. 14,550 kg 2-axle self-steering trailer type M2K-10B * Differences compared to the M2K-9L: * Leaf spring suspension * 2 single axles, BPW, 12 t with drum brakes, including safety cables Knedsgqc Hbopfx Anvja * Bolster model IX with 1x hydraulically telescoping stakes * Tires 315/80 R 22.5 on steel rims * Electric central lubrication * Payload approx. 14,100 kg 2-axle self-steering trailer type M2K-10L * Differences compared to the M2K-9L: * 2 single axles, BPW, 12 t with drum brakes, including safety cables * Bolster model IX with 1x hydraulically telescoping stakes * Tires 315/80 R 22.5 on steel rims * Electric central lubrication * Payload approx. 14,100 kg 2-axle self-steering trailer type M2R-10L Differences compared to the M2K-9L: * Ratio steering system (4-cylinder) * 2 single axles, BPW, 12 t with drum brakes, including safety cables * Bolster model IX with 1x hydraulically telescoping stakes * Tires 315/80 R 22.5 on steel rims * Electric central lubrication * Payload approx. 13,965 kg Various additional equipment available. Further information on request. Illustrations may differ from the original. All information without guarantee. Contact: Niclas Lott Tel.:

Stav: nový, pohotovostná hmotnosť: 9 600 kg, maximálna hmotnosť nákladu: 53 400 kg, celková hmotnosť: 63 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 12 400 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 1 340 mm, zavesenie: vzduch, veľkosť pneumatiky: 385/65 R22.5, farba: sivý, Výbava: ABS, Loading area: - Loading platform with approx. 30 mm thick hardwood floor - 10 pairs of fold-out lashing rings on the outside Landing legs: Knodpfxsrq Dlfs Anvea - JOST landing legs with 2-speed gearbox for 24 t lifting capacity Axles and tyres: - BPW axles, technical capacity 10,000 kg, first axle rigid, all other axles hydro-mechanically forced-steered, mounted on turntables - Air suspension with raise and lower valve - Axle tools - Tyres 385/65 R22.5 Braking system: - WABCO braking system according to EU regulations with EBS-E (4S3M) Steel construction: - Steel structure made from high-tensile fine-grain steels - Steel grades: S355J2+N/S355MC S690QL/S700MC Electrical system: - Electrical system according to EU regulations, lighting 24 Volt - ASPÖCK UNIBOX on the front connector strip with 24N, 24S & 15-pin sockets - Connections compliant with ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Painting: - First-class and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component zinc dust primer - High-quality 2-component top coat in a single colour, Nova grey - Rear section metallised and painted in RAL 9010 Accessories included: - Loading area with approx. 30 mm thick hardwood floor - 2" king pin - Galvanised steel front wall approx. 1,200 mm high, EN12642-XL - Yellow-red air couplings at the galvanised front connector strip - 4 wheel chocks with holders at the front wall - Storage for 1,000 mm stake pockets in the central beam at the rear - At the gooseneck and rear plate left and right each a holder for warning signs incl. socket - Remote axle steering operation from the front and rear via cable remote control with push buttons and tracking control - Electro-hydraulic power unit - White reflective tape on sides and red at rear according to EU regulations - 12 pairs of stake pockets for 100 x 50 mm stanchions in the external frame of the loading area - European reflector plates at the rear of the trailer - Mount for a rotating beacon at the rear of the trailer - One mudflap at the trailer rear - Manual and documentation on USB stick - BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and detachable cover around the pump TPMS Tyre Pressure Monitoring System: - For correct display, the towing vehicle must be able to transmit and display this data - Lift axle on the front axle with control via TEBS E, dependent on the current axle load and loading status - Radio remote control for axle steering, in addition to cable remote, with indicator lights on the receiver for tracking control - 5 pairs of stake pocket strips, mounted crosswise on the loading area, for 100 x 50 mm stanchions - 80 km/h speed stickers, mounted at the rear and on both sides - Adjustable access ladder mounted left and right in the direction of travel - 2 reversing lights mounted on the rear panel - Load pressure gauge to determine axle loads including load chart - HRM metallisation of the external frame: Complete steel structure shot-blasted, then the defined visible areas are metallised and hot-finished with ZINACOR 850 (zinc 85% - aluminium 15%)

Stav: nový, pohotovostná hmotnosť: 15 550 kg, maximálna hmotnosť nákladu: 47 450 kg, celková hmotnosť: 63 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 800 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck in SNT design for optimizing loading area length, approx. 3,700 mm long - Rear gooseneck with approx. 1,000 mm x 10° bevel Loading Area: - Extendable loading area, approx. 8,800 mm in length, with an approx. 500 mm x 10° bevel at the rear - A recess in the loading area and the bevel, designed to accommodate the excavator stick - Pneumatic locking with conical locking bolts and reinforced locking positions - Hardwood decking on the beveled section of the loading area Ramps: - 1 pair of two-part steel ramps, approx. 4,350 mm long and 900 mm wide - Ramps with hardwood decking - Hydraulically foldable ramp ends - Each ramp hydraulically adjustable outwards by approx. 235 mm and inwards by approx. 215 mm - Square climbing bars 20 x 30 mm, positioned approx. every 200 mm on the outer frame of the ramp Axles and Suspension: - BPW axles and suspension, 1st axle steering ahead, all other axles hydromechanically forced steered - Technical axle load: 12,000 kg - 1st axle with electromagnetic reverse lock, activated via reverse gear and also manually - Air suspension with lift and lower valve - Twin tires 235/75 R 17.5 - TPMS tire pressure monitoring system according to ECE R141 - TPMS sensors mounted on all wheels including spare wheels Accessories included: - Plug-in steel front wall, approx. 400 mm high - 3kW electro-hydraulic power unit for hydraulic operations, excluding hydraulic winches - Parking location on the gooseneck for warning panels when not in use - 1 spare wheel - On the gooseneck: 1 pair of plug-in anodized ALU side boards, approx. 400 mm high - Plug-in anodized ALU rear board on the gooseneck, approx. 400 mm high - On the gooseneck: approx. 40 mm thick hardwood decking, over the kingpin tread plate covering - 2" kingpin - Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide - 4 wheel chocks - Mechanical landing gear with 2-speed gearbox and crank - JOST Modul B – static test load = 50,000 kg - 1 intermediate table, approx. 300 mm wide - Extendable galvanised outriggers, approx. 230 mm per side - Wheel recesses with square climbing bars - ALU covers for the wheel recesses - 1 pair of mechanical rear supports - Remote steering system operable from the front and rear via cable remote control, with single-track control for axles - 1st axle with automatic lift axle function Knodsk Aht Uopfx Anvoa - Central lubrication system with 1 pump, brand BEKAMAX - Radio remote control for rear steering, additional to the cable remote, with 2 indicator lights on receiver for single-track control - Wabco Smart Board System - 4 warning panels, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and brackets for rotating beacon

Stav: nový, pohotovostná hmotnosť: 11 000 kg, maximálna hmotnosť nákladu: 27 000 kg, celková hmotnosť: 38 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 300 mm, šírka ložného priestoru: 2 550 mm, veľkosť pneumatiky: 235/75 R17.5, farba: sivý, prevádzková hmotnosť: 11 000 kg, Výbava: ABS, Chassis: - Welded steel frame construction with front and rear frame cranking and lowbed without rear bevel - Gooseneck + king pin plate 225 mm - Lowbed designed for point load of 25 t over 5 m - Outer frame closed to the outside with welded lashing rings for securing cargo - Interchangeable 2" king pin - Rear hanging track for aluminum ramps Axles and Tyres: - BPW low loader axles, each with 10 t axle load, air bellows diameter 360 mm - Air suspension with lifting and lowering device, lift 220 mm (-60/+160 mm) - Wabco SmartBoard with ECAS function for 2 coupling heights + 100 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - IVTM tire pressure monitoring system - 9 tires 235/75 R 17.5, tubeless Steering: - 1st and 2nd axle hydraulically forced steering via fifth wheel coupling Floor: - Laminated multi-layer floor, 27 mm thick, flush with outer frame and longitudinal beams - Reinforced underneath with GRP coating - 12 pairs of lashing rings welded into the outer frame (8 pairs RUD 8 t – 6 pairs in the lowbed as well as one pair each on the gooseneck and at the start of the rear compartment – 2 pairs each of 4 t lashing rings on the gooseneck and rear compartment) - 6 pairs of mushroom lashing points in the outer frame lowbed - Storage compartment with lid in the lowbed floor front left and right Front Wall: - 25 mm aluminum hollow profiles extended up to the lower roof edge with integrated curtain tensioning device Curtain Sides: - Curtains on both sides with welded-in vertical and horizontal straps (spacing approx. 600 mm) and tension locks made of stainless steel - Adjustable curtain straps (over-center type) for loading width up to 4,000 mm including curtain extension with press studs and Velcro fastener - Curtain extension to the driving direction: 300 mm, in height: 750 mm - With eyelets for loose curtain extension part - 1 pair of vertical curtain pockets approx. 1,000 mm long, positioned in the lowbed at the front cranking - With strap pockets Rear Wall: - Steel tail portal frame with side curtain retaining bracket - Aluminum double-wing door, 25 mm thick - Both door wings fully folding with door retainers - Each door wing with one double hinge and two recessed grip pockets Front Corner Posts: - At roof height, bolted to the front end Center Posts: - 3 pairs of infinitely adjustable folding posts - Posts are movable along the entire length by means of rollers Knsdpfx Aoiu Eu Njnvoa - Center posts in lowbed also fixable at the rear platform Roof: - EDSCHA sliding roof (galvanized) with transverse bows, can be shifted in both directions (pushed together at the front in the load area) - Rear portal crossbar can be swivelled away - PVC tarpaulin roof without customs closure - Manual hydraulic lifting roof on both sides, lift 450 mm - Retractable roof can be operated in front (9x50) and rear (9x50) raised positions - Including curtain extension and curtain tail at the rear - Roof canopy at the very front of the front wall, each extendable by 900 mm with crank Accessories: - Extensible warning signs (removable at front and rear with socket), incl. position lights up to loading width of 4,000 mm - Storage for 4 warning signs inside front wall, top right and left - 1 aluminum ladder with holder, 2,500 mm long, at the front wall - 2 rows of self-locking aluminum slats - Sheet metal fenders with mud flaps - 1 night parking sign and 1 ADR sign on the rear wall - Central lubrication system BEKAMAX with pump and grease

Stav: nový, pohotovostná hmotnosť: 13 500 kg, maximálna hmotnosť nákladu: 51 500 kg, celková hmotnosť: 69 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 800 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 r17.5, farba: sivý, Výbava: ABS, Gooseneck: Gooseneck in SNT design for optimizing the loading platform length; length approx. 3,700 mm. Gooseneck rear bevel approx. 1,000 mm x 10°. Loading platform: Telescopic loading platform, length approx. 8,800 mm, with rear bevel approx. 500 mm x 10°. Recess in the bevel as well as extending into the loading platform to accommodate the excavator's bucket linkage. Pneumatic locking with conical bolt and reinforced lock positions. Supply lines are protected within the telescopic beam and adapt to the respective platform length. Ramps: Kjdpfx Ansk Ahugsvona 1 pair of two-part steel ramps, approx. 4,350 mm x 900 mm. Hydraulically folding ramp tips. Each ramp can be hydraulically shifted approx. 235 mm outward and approx. 215 mm inward. Axles and suspension: BPW axles and suspension, two rigid axles, two self-steering axles. Electromagnetic reverse lockout, activated via reverse gear and manually. Air suspension with raise/lower valve. Axle tools. Tyres: 235/75 R17.5 3PMSF, dual-mounted. Load index: 143/141J (144/144F). Braking system: WABCO brand braking system, EBS-E, compliant with EU regulations. Lighting system: 24-volt lighting system in "ASPÖCK-NORDIK full LED." Metal finishing: Standard HRM metallization of the outer frame. Complete steel structure shot-blasted, then all defined visible surfaces hot-coated with ZINACOR 850 (zinc 85% - aluminum 15%). Steel structure: Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Welders certified to DIN-EN 287-1. MAG welding method according to EN ISO 4063. Protective gas M21 according to EN ISO 14175. Standard accessories included: Removable front wall, steel, height approx. 400 mm. ASPÖCK-UNIBOX at the front connection strip with 24N, 24S, & 15-pin sockets. 24N connection per ISO-118524S connection per ISO-373115-pin connection per ISO-12098. Round NATO socket at the front connection strip. Power cable for supplying the electro-hydraulic unit and/or electric winch (35 mm², 3.5 m long) between trailer and truck tractor with connector (NATO-NATO). 3 kW electro-hydraulic unit for operating hydraulic functions, except hydraulic winches. 1 spare wheel with mounting adapter. External beam of gooseneck with fixing holes for bolted lashing rings; first hole approx. 200 mm from the front, then every approx. 400 mm. 2 pairs of screw-in lashing rings included. Fixing hole at the upper rear of the gooseneck external beams for a bolted lashing ring. 1 pair of screw-in lashing rings. Approx. 40 mm thick hardwood flooring over the gooseneck. On the gooseneck, 1 pair of removable, anodized aluminum sideboards, approx. 400 mm high. On the gooseneck, 1 removable anodized aluminum rear wall, approx. 400 mm high. 2” king pin. Guide plate on gooseneck for fifth wheel plate, approx. 500 mm wide. 4 wheel chocks with holders. Mount for aluminum approach ramps. Mechanical landing legs with 2-speed gearbox and crank. Approx. 50 mm hardwood floor, continuous on the platform and interrupted between the axles. Platform locking with conically welded locking profiles every 250 mm, including pre-tensioning plate. Long holes at the front of the loading platform for hook-in and relocatable bridging elements. 1 intermediate table with recessed platform, approx. 300 mm wide for the extension tube with large cross-section with steel covering. Front and rear with long holes...

Stav: nový, pohotovostná hmotnosť: 17 500 kg, maximálna hmotnosť nákladu: 43 500 kg, celková hmotnosť: 61 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 7 550 mm, šírka ložného priestoru: 2 750 mm, výška ložného priestoru: 400 mm, veľkosť pneumatiky: 245/70 R 17.5, farba: sivý, Výbava: ABS, Neck (Gooseneck): - Gooseneck in SNT design for optimizing loading platform length, approx. 3,750 mm long - Gooseneck hydraulically liftable/lowerable and detachable - For tractor units: 6x4 or 8x4 Deck (Lowbed): - Lowbed with external beams, extendable design, "SUPER LOW" type, approx. 7,550 mm long - Lowbed with fixed hardwood floor, approx. 40 mm thick, with mechanical locking - Service lines protected and routed within the extendable beams, automatically adjusting to the respective lowbed length Rear chassis: - Rear chassis with closed outer frame, checker plate surface, and continuous prism excavator trough, approx. 1,450/900 x 505 mm, open at the rear - 2 pairs of stake pockets (100 x 50 mm) on the outer frame for plug-in stakes Axles and tires: - "PENDULUM AXLE", all axles forced-steered hydromechanically - Burst pipe valve to axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and plug pin for securing in raised position - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tires 245/70 R 17.5 / 3PMSF Accessories included: - Prepared for mounted container locks for 1x 20ft or 1x 40ft container on outer beams - 2" king pin - One galvanized steel front wall, approx. 400 mm high - One spare wheel with holder - Yellow-red air couplings on the galvanized front connector strip - 4 wheel chocks - Remote steering front and rear operated by wire remote control via pushbuttons, with single-track axle alignment control - Hydraulic couplings between gooseneck and lowbed as multi-coupling instead of screw type - Electro-hydraulic power pack - White reflective tape as per EU regulations on the sides, at the extension and red on the rear - 2 wooden blocks 500x250x200 mm - European reflective warning panels (red-yellow) at trailer rear - On gooseneck and rear section: holders for warning signs with sockets left and right - Central lubrication system with 2 BEKAMAX (Pico) pumps, standard grease NLGI-2 - Load gauge to determine axle loads, incl. load chart - On gooseneck, plug-in aluminum side walls and rear wall approx. 2,000 x 400 mm - Rear galvanized plug-in stakes removable (body length approx. 2,120 mm) - Separate air connection with air gun on the gooseneck - Duomatic air coupling from gooseneck to lowbed - Gooseneck closed at rear upper section with removable cover - 1 pair of steel ramps for bridging the lowbed receptacle hooks - Four approx. 400 mm extendable warning signs, approx. 423 x 423 mm - Radio remote control for rear steering in addition to cable remote, with receiver indicator lights for single-track alignment - 6 pairs threaded blocks between lashing rings under top chord on outer beam for installation of screwable RUD rings VLBG-4 - 7 pairs of stake pockets (100 x 50 mm) in outer frame of load platform - Folding extensions, approx. 230 mm per side - Anti-slip sand coating painted on load platform - Dipper stick trough at front and rear of rear chassis closed with plug-in plates - HRM Metallization (High Resistance Metallization) of the outer frame Kedpfx Ajh Hm Thjnvena - Complete steel construction shot-blasted, then defined visible surfaces metallized with ZINACOR 850 (Zinc 85% - Alu 15%) by hot finishing

Stav: nový, pohotovostná hmotnosť: 13 250 kg, maximálna hmotnosť nákladu: 47 550 kg, celková hmotnosť: 60 800 kg, konfigurácia náprav: 3 nápravy, zavesenie: vzduch, veľkosť pneumatiky: 245/70 r17.5, farba: sivý, Výbava: ABS, Gooseneck: Gooseneck with rear chamfer of approx. 750 mm x 10°. 3 pairs of lashing rings 30 mm thick hardwood flooring Extendable loading platform: Extendable loading platform with rear chamfer of approx. 1,000 mm x 8° 5 pairs of hinged lashing rings (can be folded outward) 3 pairs of hinged lashing rings (can be folded outward) 1 pair of horizontal lashing rings at the front of the loading platform Knsdpfx Anel Uxdkjvoa Cutouts in the outer frame of the loading platform for hooking in tensioning straps Hardwood floor approx. 48 mm thick, anti-slip checker plate over the axles Two-part steel ramps: One pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood overlay. Ramps with hydraulically extendable and retractable ramp sections, hydraulic lifting device, and hydraulically adjustable. Maximum load capacity per pair: 40,000 kg Landing legs: JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test capacity) Axles and tires: BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanical forced steering Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tools Tires: 245/70 R 17.5 Brake system: Brake system compliant with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit Steel construction: Steel construction made of high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Paintwork: Top-quality, durable corrosion protection of the standard shot-blasted welded frame guaranteed by a two-component (2K) zinc-rich primer High-quality single-color 2-component (2K) top coat in Nova Grey Rear section metalized and painted in RAL 9010 (pure white) No metallic paints possible Electrical system: Electrical system according to EU specifications, 24 volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets Connection as per ISO 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Accessories included: 2" kingpin Galvanized steel front wall approx. 400 mm high Yellow-red air couplings on the galvanized connection bar at the front 4 wheel chocks with holder at the front wall One spare wheel with holder in front of the front wall Electro-hydraulic power pack Remote steering from front and rear via cable remote control with push-button operation and single trace axle control Mount at the rear of the gooseneck for ALU loading ramps European reflective panels (red-yellow) at the rear of the trailer White reflective striping according to EU regulations at the side, at the extension element, and rear in red On the gooseneck and ramps left and right, each with one bracket for warning signs including socket A bracket for a revolving beacon at the rear of the trailer Galvanized folding supports under the chamfer of the loading area Control valves for ramps mounted on the right side of the trailer Cover plates for bridging the gap between ramps and loading area One mudflap at the rear of the trailer Manual and documentation on USB stick Central lubrication system BEKAMAX (Pico) with standard NLGI-2 grease and removable pump guard On the gooseneck, removable ALU side boards and rear board approx. 2,440 x 400 mm Rear galvanized removable stanchions, body length approx. 2,560 mm A toolbox INOX 1,350x400x400 on the gooseneck, box covers oil fill 4 pairs of WADER container locks in the loading platform for one

Stav: nový, pohotovostná hmotnosť: 17 250 kg, maximálna hmotnosť nákladu: 48 700 kg, celková hmotnosť: 66 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 7 550 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 375 mm, veľkosť pneumatiky: 245/70 R 17.5, farba: sivý, prevádzková hmotnosť: 17 250 kg, Výbava: ABS, Labutia tyč (Schwanenhals): - Labutia tyč v SNT dizajne na optimalizáciu dĺžky ložnej plochy, dĺžka cca 3 750 mm - Hydraulicky zdvíhateľná/spúšťateľná a zjazdná labutia tyč - Pre ťahače: 6 x 4 a 8 x 4 (alebo 6 x 4 s voliteľným jednoosovým dolly) Nízka ložná plocha (Tiefbett): - Nízka ložná plocha s vonkajšími nosníkmi, vyhotovená ako teleskopický most na kotly v nízkom prevedení s výsuvom vpredu - Rozmery: dĺžka x šírka cca 7 550 mm x 2 740 mm - Mechanické uzamykanie výsuvu Podvozok: - Zadný podvozok s uzavretým vonkajším rámom - Rebrovaný plechový povrch a priebežná prizmatická výrezová „baggermulda“ cca 1 450/900 x 505 mm, vzadu otvorená Nápravy, pruženie a pneumatiky: - „PENDEL-AXLE“ – všetky nápravy sú hydromechanicky riadené - Ventil proti prasknutiu hadíc na vyrovnávacích valcoch náprav s automatickou funkciou RESET - Hydraulické valce s uzatváracími kohútikmi a predpínačmi na zaistenie vo zdvihnutej polohe - Záverečný lak náprav: 2 vrstvy dvojzložkového laku v jednotnej farbe „FAY-Grau-34-0260“ - Technická nosnosť nápravy: 12 000 kg - Hydraulické vyrovnávanie záťaže na nápravy - Pneumatiky: 245/70 R 17.5 Príslušenstvo: - Predná stena z ocele, zasúvateľná, výška cca 400 mm - 4 ks kliny pod kolesá - Zadná horná časť labutej tyče zakrytá odnímateľným krytom - 1 pár oceľových nájazdových rámp so slikrami a upevňovacími kolíkmi pre mostíky na uchytenie do nízkej ložnej plochy - Rampy je možné položiť nad alebo medzi háky - Možnosti upevnenia oceľových nájazdových rámp vzadu medzi vonkajšími nosníkmi labutej tyče - Zaisťovacie miesta každých cca 1 000 mm na výsuve - 1 upevňovací krúžok vľavo a vpravo na prednom priečniku - Pripojovací panel pre napájacie vedenia k ťahaču, umiestnený na úrovni vonkajšieho rámového profilu - 6 párov závitových blokov na vonkajšej strane vnútorných nosníkov ložnej plochy pre montáž skrutkovacích krúžkov M24 Kjdpfx Anjh Hm Tzovona - 6 párov zapustených upevňovacích krúžkov na vonkajšej strane vonkajších nosníkov ložnej plochy, sklopné dovnútra aj von - 1 pár závitových blokov vpredu a vzadu na vonkajších nosníkoch ložnej plochy pre montáž skrutkovacích krúžkov M24 - Závesná lišta pre voľné hliníkové nájazdové rampy na zadnom priečniku vozidla - Centrálne mazanie s dvoma čerpadlami značky BEKAMAX - Riadenie zadnej nápravy vpredu aj vzadu, ovládateľné káblovým diaľkovým ovládaním s kontrolou zarovnania náprav - 3 kW elektrohydraulická jednotka na ovládanie hydrauliky (okrem hydraulických navijakov) - Vyberateľná ložná podlaha (pozinkovaná), 3 diely medzi vonkajšími nosníkmi, s tvrdým drevom - Výklopné rozširovacie dosky cca 230 mm na každú stranu - Voľne položené rozširovacie dosky, s oceľovým rámom - 4 výstražné tabule cca 423 x 423 mm - Rádiové diaľkové ovládanie pre riadenie zadnej nápravy - 3,5'' kráľovský čap (königszapfen) - Protišmykový povrch na ľavom zrážaní labutej tyče - Hydraulické prípojky medzi labuťou tyčou a nízkou ložnou plochou s multispájacou namiesto skrutkových spojov - Vodiaca platňa labutej tyče pre sedlový čap, cca 800 mm široká - 1 rezervné koleso s držadlom - Parkovacie miesto na labutej tyči pre výstražné tabule pri nevyužití - 2 páry vreciek na kolíky zapustené v vonkajšom ráme podvozku pre zasúvacie kolíky cca 100 x 50 mm - Výrez lyžicovej tyče zadného podvozka vzadu uzatvorený zasúvateľnou doskou - Farba návesu: MB 7350 Novagrau

Stav: nový, maximálna hmotnosť nákladu: 49 000 kg, celková hmotnosť: 60 800 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 r 17.5, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck with chamfered front corners at 45° and rear chamfer of approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable Loading Area: - Extendable loading area with rear chamfer of approx. 1,000 mm x 8° - 5 pairs of fold-out lashing rings on the outside (LC 5,000 daN) - 3 pairs of fold-out lashing rings on the outside (LC 10,000 daN) Kjdpfx Ansh Etf Rsvjna - 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) - Cut-outs in the external frame of the loading area for attaching tie-down straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, with chequered plate covering over the axles Detachable Two-Part Ramps: - One pair of galvanized, two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood overlay - Ramps with hydraulically folding ramp sections, hydraulic lift and hydraulically adjustable side shift - Max. load per pair: 40,000 kg Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and Tyres: - BPW axles, two rigid axles, two self-steering axles, air-suspended, with drum brakes, lifting/lowering function - The self-steering axles can be locked via electromagnetic reverse lock through reverse gear or manually - Axle tools - Tyres: 235/75 R 17.5 Brake System: - Brake system in accordance with EU regulations with EBS-E (4S3M) Steel Construction: - Steel construction made from high-strength fine-grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Paintwork: - Premium and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc-rich primer - High-quality 2-component (2K) topcoat in single-tone Novagrey Electrical System: - Electrical system according to EU regulations, ASPÖCK-NORDIK (ASS3) 24 Volt lighting - ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets Included Accessories: - 2" king pin - One galvanized steel front wall, approx. 400 mm high - One spare wheel with holder in front of the front wall - Yellow and red air couplings on galvanized front terminal strip - 4 wheel chocks with holder on the front wall - Mounting at the rear of the gooseneck for ALU approach ramps - Galvanized folding supports under the chamfered loading area - Bracket for a rotating beacon - Cover plates to bridge the gap between ramps and loading area - White reflective tape according to EU regulations on the sides, red at the rear and on the extension - Electro-hydraulic power unit - At the gooseneck and on the ramps, left and right, each with mounting for warning panels including socket - Control valves for the ramps mounted on the right side of the semi-trailer - Mudflap at the rear of the trailer - User manual and description on USB stick - Removable ALU side boards and rear panel on the gooseneck, approx. 2,440 x 400 mm - Rear galvanized stanchions removable (body length approx. 2,560 mm) - 4 pairs of WADER container pockets in the loading area for a 20 ft, 2x 20 ft or a 40 ft container - 7 pairs of stake pockets for 100 x 50 mm stakes in the external frame of the loading area - Extensions, galvanized, retractable by approx. 230 mm per side - Lift axle on the front axle with control - 20 x 20 mm square climbing strips - BEKAMAX central lubrication system - Four warning panels extendable by approx. 400 mm (approx. 423 x 423 mm)

Stav: nový, pohotovostná hmotnosť: 12 900 kg, maximálna hmotnosť nákladu: 34 100 kg, celková hmotnosť: 47 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 850 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 350 mm, zavesenie: iný, veľkosť pneumatiky: 245/70 R 17,5, farba: sivý, prevádzková hmotnosť: 12 900 kg, Výbava: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading platform length, approx. 3,750 mm - Gooseneck hydraulically liftable/lowerable and removable Ksdpfx Aohlz R Senvona - Technical fifth wheel load: 23,000 kg - Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4 Loading Platform: - Low bed with external beams, extendable “SUPER LOW” design, approx. 6,850 mm long - Low bed with fixed hardwood floor approx. 40 mm thick and mechanical locking Rear Chassis: - Rear chassis with closed outer frame, chequer plate covering, and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear - 2 pairs of lashing rings foldable outwards - 1 pair of lashing rings mounted flat in the trough - 2 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame Pendulum Axle and Tyres: - “PENDEL-AXLE”, all axles hydromechanically forced-steered - Burst protection valve on the axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pre-inserts for securing in raised position - Axles finished with two layers of single-colour 2K paint in "FAY-Grey-34-0260" - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres 245/70 R 17.5 - TPMS tyre pressure monitoring system according to ECE R 141 Accessories: - Prepared for mounting bolt-on container locks for 1x 20ft or 1x 40ft container on the outer beams - 2" kingpin - Galvanised steel front wall, approx. 400 mm high - One spare wheel - At the galvanised connection rail front, yellow-red air couplings - 4 wheel chocks - Forced steering from front and rear controlled via cable remote control with push buttons, includes single-track monitoring of axles - Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings - Electro-hydraulic power pack - White reflective tape on the sides, the extension, and the rear in accordance with EU regulations - European reflective panels (red-yellow) at the rear of the trailer - Brackets at the gooseneck and rear panel left/right for warning signs, including socket - 6 pairs of threaded blocks between lashing rings under the top flange on the outer beam for mounting bolt-on RUD VLBG-4 rings - Plug-in ALU sidewalls and rear wall on the gooseneck approx. 2,440 x 400 mm - The rear galvanised plug-in stakes are removable (body length approx. 2,560 mm) - Gooseneck rear upper area closed with removable cover - 5 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading platform - Folding widening pieces, approx. 230 mm per side - 2 pairs of bolt-on RUD VLBG-4 M24 rings (LC 8,000 daN) - 1 pair of steel ramps for bridging the low bed towing hook - On the loading platform, a coated sand layer as anti-slip protection - 80 km/h speed stickers at the rear and both sides - Rear part of the driving gear’s dipper stick trough covered by a plug-in plate - Four retractable warning boards approx. 423 x 423 mm, extendable by approx. 400 mm - Radio remote control for forced steering, in addition to cable control, with indicator lights on the receiver for axle single-track monitoring - Central lubrication system with 2 BEKAMAX (Pico) pumps using standard NLGI-2 grease - Load gauge for determining axle loads - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible surfaces are metallized with ZINACOR 850 (zinc 85% - alu 15%) and hot-finished

Stav: nový, maximálna hmotnosť nákladu: 38 100 kg, celková hmotnosť: 50 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 100 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 760 mm, zavesenie: vzduch, veľkosť pneumatiky: 205/65 R17.5 3PMSF, farba: sivý, Výbava: ABS, Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading platform: 5 pairs of folding lashing rings on the outside 3 pairs of folding lashing rings on the outside 1 pair of horizontal lashing rings at the front of the loading platform Cutouts in the outer frame of the loading platform for attaching tie-down straps Approx. 48 mm thick hardwood flooring, over the axles with checker plate covering Landing gear: JOST landing legs with 2-speed gearbox for 24 t lifting capacity Axles and tyres: BPW axles, two fixed and two self-steering axles, air suspension, drum brakes, with raise/lower function The self-steering axles can be locked for reversing via electromagnet, activated through reverse gear or manually Axle tools Tyres 205/65 R17.5 3PMSF Braking system: WABCO braking system according to EU regulations with EBS-E Steel construction: High-strength fine grain steel frame Steel grades: S355J2+N/S355MC S690QL/S700MC Electrical equipment: Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets Connection in accordance with ISO Paintwork: Premium, durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component zinc dust primer High-quality 2-component top coat, single color in MB 7350 Novagrau Metallic paint not available Rear section metallized and painted in RAL 9010 Standard equipment included: 1 spare wheel 205/65 R 17.5 TPMS tire pressure monitoring system in accordance with ECE R 141 At the galvanized front connection strip: yellow-red air couplings 4 wheel chocks with brackets on the front wall Mounting at the rear of the gooseneck for ALU loading ramps Galvanized folding supports underneath the sloped section of the loading area One bracket for a rotating beacon at the rear of the trailer Height-adjustable curtain structure Galvanized front wall with a tensioning mechanism for the sliding curtains Adjustable height approx. 400 mm "EDSCHA" brand roof, forward-sliding on ALU roof beam profiles, bolted to front and rear walls Knjdpfxstphtmj Anvea 3 pairs of sliding stanchions on the loading area The superstructure can be hydraulically extended at the rear left and right by approx. 750 mm Sliding roof with lift-up portal beam Sliding curtain with 700 mm extra length, with tensioning straps approx. every 600 mm Height to top edge of superstructure approx. 3,960 mm Driving with open sliding roof is not permitted and will cause damage to the curtain Hanger bar for ALU loading ramps at the rear of the vehicle On the gooseneck and on the left and right of the rear panel, each with a bracket for warning signs including socket Mudflap at the rear of the trailer European reflective plates at the rear of the trailer 7 pairs of stake pockets for 100 x 50 mm insertable stakes in the outer frame of the loading platform Lifting axle on the front axle controlled by TEBS E depending on current axle load and loading condition Superstructure at the rear with closed ALU swing doors On the checker plate on the gooseneck and loading area, an integrated sand coating to prevent slipping Central lubrication system BEKAMAX with standard grease NLGI-2 and removable pump guard 80 km/h speed stickers at the rear and on both sides Load gauge for axle load determination including load diagram

Stav: nový, pohotovostná hmotnosť: 34 500 kg, maximálna hmotnosť nákladu: 106 700 kg, celková hmotnosť: 141 200 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 7 150 mm, šírka ložného priestoru: 2 850 mm, výška ložného priestoru: 580 mm, veľkosť pneumatiky: 285/70 R19.5, farba: sivý, prevádzková hmotnosť: 34 500 kg, Výbava: ABS, Gooseneck: - Gooseneck hydraulically liftable/lowerable and detachable - Length approx. 3,650 mm Knedswhywfspfx Anvoa - Extensive lashing positions - For tractor units: 6 x 4 or 8 x 4 3-Axle Compact Front Undercarriage: - Hook mountings at front and rear - Undercarriage length x width approx. 3,560 mm x 2,850 mm - Extensive lashing positions Excavator Deck “BB-A”: - Telescopic excavator deck “BB-A” with drive-over deck hooks at the front and pin-lug coupling at the rear - Length x base width approx. 7,150 mm x 2,850 mm - Beam height x width approx. 430 mm x 1,350 mm - Loading height 580 mm with ground clearance of 150 mm - 5 pairs of hanging lashing rings (LC 10,600 daN) - 4 pairs of M30 threaded blocks on the inner beam for mounting screwable rings 5-Axle Rear Undercarriage: - Mechanical pin-lug coupling at the front for low bed attachment; end cross-member at the rear - Undercarriage length x width approx. 6,840 mm x 2,850 mm - Extensive lashing positions Pendulum Axle and Tyres (front and rear undercarriage): - "PENDULUM AXLE", all axles hydro-mechanically forced steered - Hose rupture valve on axle balancing cylinders with automatic RESET function - Hydraulic cylinders fitted with shut-off taps and locking plugs for securing in raised position - Final coating of axles with two layers of 2K paint, single color MB 7350 Novagrau - Technical axle load: 14,640 kg (62 km/h) - Hydraulic axle compensation - Axle tools - Tyres: 285/70 R19.5 Remote Steering (Follow-up Steering): - Remote steering from front and rear operable via cable remote control with push buttons, with axle tracking monitoring - Socket for remote steering operation at the gooseneck - Cable remote control with push buttons including axle tracking monitoring Accessories included: - Yellow-red air couplings on galvanized front connection rail - Steel front wall approx. 400 mm high - 4 wheel chocks with holders - 2 spare wheels 285/70 R19.5 - 3.5" king pin - Boom with winch for spare wheel at gooseneck front - Truck hydraulic connection with flow regulator (40 l/min), including boom for suspending service lines; tractor unit tank must have at least 80 liters capacity with connectors - White reflective tape according to EU regulations on the sides and on the extension, red at the rear - Plug-in ALU side boards and tailgate on the gooseneck, approx. 400 mm high, anodized - Control levers on the gooseneck protected by a foldable cover - Separate air connection with air gun at the gooseneck - Central lubrication system BEKAMAX with standard grease NLGI-2, 1x at the gooseneck, 1x at the 3-axle undercarriage, 1x at the 5-axle undercarriage - Variomax tool kit - Multi-coupling hydraulic connections at low bed hook area - Front undercarriage with separate air connection for pneumatic tools - Threaded insert option (ø 40 mm) every approx. 500 mm on the outer web of the excavator deck for screw rings - Foldable width extensions with steel inlays, adjustable from approx. 2,850 mm to 3,250 mm - Steel inlays with approx. 12 mm thick rubber covering - Two INOX toolboxes 855 x 340 x 390 mm - Radio remote control for steering in addition to cable remote control - Sand layer coating as anti-slip protection - 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery

Stav: nový, pohotovostná hmotnosť: 10 600 kg, maximálna hmotnosť nákladu: 39 400 kg, celková hmotnosť: 50 960 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 760 mm, zavesenie: vzduch, veľkosť pneumatiky: 205/65 R17.5, farba: sivý, prevádzková hmotnosť: 10 600 kg, Výbava: ABS, Gooseneck: - Gooseneck with 30 mm hardwood floor - Gooseneck in straight design at the rear - 3 pairs of lashing rings (LC 5,000 daN) Extendable loading area: - Loading area in extendable version - 5 pairs of lashing rings foldable outwards - 3 pairs of lashing rings foldable outwards - 1 pair of lashing rings laid flat at the front of the loading area - Cut-outs in the outer frame of the loading area for attaching tension belts - Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering Landing legs: - JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and tyres: - BPW axles, two rigid, two trailing steering axles - Air suspension, with drum brakes, with lifting/lowering function - The trailing steering axles with electro-magnetic reversing lock, can be activated either via reverse gear or manually - Axle tools - Tyres 205/65 R17.5 Brake system: - Brake system in accordance with EU regulations with EBS-E (4S3M) Steel construction: - Steel construction made of high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system in accordance with EU regulations, 24-volt lighting, ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets - Connections according to ISO: - 24N ISO-1185 - 24S ISO-3731 Kjdpfet Ag Uwox Anvjna - 15-pin ISO-12098 Paintwork: - First-class and long-lasting corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) top coat, single-colour in Novagrau - Rear section metalized and painted in RAL 9010 (pure white) Included accessories: - One spare wheel with holder in front of the front wall - 2" kingpin - Galvanized steel front wall approximately 400 mm high - Yellow-red air couplings on the galvanized connection bar at the front - 4 wheel chocks with holders on the front wall - Galvanized folding supports under the sloped loading area - Bracket for a revolving beacon at the rear of the trailer - Galvanized, extendable width approx. 230 mm per side - White reflective tape to EU regulations on the side, at the extension, and red at the rear - At the gooseneck and on the rear plate, left and right, one bracket for warning signs each, including socket - European reflective warning plates (red-yellow) at the rear of the trailer - TPMS tyre pressure monitoring system according to ECE R 141 - On the gooseneck, plug-in aluminium side and rear panels approx. 2,440 x 400 mm - The rear, galvanized plug-in stakes are removable, length of the structure approx. 2,560 mm - 7 pairs of WADER container locks - 1x 20ft container on the loading area; 1x 40ft container on the loading area; 1x 40ft container above the gooseneck; 2x 20ft containers - 7 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area - Lift axle at the front axle controlled by TEBS E, depending on current axle load and load condition - Movable hanging bar for aluminium approach ramps at the rear of the vehicle - On checker plates on the gooseneck and loading area, a painted-in sand layer as anti-slip protection - Four warning signs each extendable by approx. 400 mm, size approx. 423 x 423 mm, with position light - On warning signs, bracket for rotating beacon - 80 km/h speed stickers on the rear and both sides - Load manometer for determining axle l

Stav: nový, pohotovostná hmotnosť: 12 000 kg, maximálna hmotnosť nákladu: 54 000 kg, celková hmotnosť: 66 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 245/70 R 17.5, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable loading platform design: - Extendable loading platform with rear chamfer approx. 1,000 mm x 8° - 5 pairs of fold-out lashing rings (LC 5,000 daN) - 3 pairs of fold-out lashing rings (LC 10,000 daN) - 1 pair of recessed lashing rings in the front loading area (LC 10,000 daN) - Cut-outs in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) - Hardwood flooring approx. 48 mm thick, over the axles with tread plate covering Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox, 24 t lifting capacity (50 t test load) Brake system: - WABCO braking system compliant with EU regulations with EBS-E (4S3M) Steel structure: - Steel structure made from high-strength fine-grained steels Axles and tyres: - BPW axles and suspension, 1st axle rigid, all other axles hydro-mechanically forced-steered - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Axle tool - TPMS tyre pressure monitoring system in accordance with ECE R 141 - Tyres 245/70 R 17.5 3PMSF Accessories included: - 2" king pin - Galvanised steel front wall approx. 400 mm high - At the galvanised front connection plate: yellow-red air couplings - 4 wheel chocks with holder on the front wall - 1 spare wheel with holder in front of the front wall - Electro-hydraulic power unit - Forced steering, front and rear, operated via cable remote control with push buttons, with tracking control for the axles - European reflector plates (red-yellow) at the rear of the trailer - White reflective tape on the sides and the extension, red at the rear, in accordance with EU regulations - On gooseneck and rear left and right: holder for warning boards including socket - Galvanised, extendable width extensions, ca. 230 mm per side - Holder for beacon at the rear of the trailer - Galvanised folding supports under the rear chamfer of the loading platform - Mudflap at the rear - Operating manual and description on USB stick - Central lubrication system BEKAMAX (Pico) with standard lubrication grease NLGI-2 and removable guard around the pump - Plug-in ALU side boards and rear board on the gooseneck approx. 2,440 x 400 mm - Rear galvanised stakes are removable (body length approx. 2,560 mm) - INOX toolbox 1,350x400x400 on the gooseneck (note: box covers oil filler cap) - 4 pairs of WADER container pockets in the loading area for 1x 20ft, 2x 20ft, 1x 40ft, or 1x 45ft container - 7 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area - Sliding hook-in crossbar for ALU drive-on ramps at the rear Knsdsykpbkspfx Anvja - Square climbing bars 20 x 20 mm every 200 mm on the outside frame of the rear chamfer - Lift axle on the front axle with control via TEBS-E depending on axle load and current loading condition - Four warning boards extendable by approx. 400 mm, approx. 423 x 423 mm with a position light - Holder for beacon on the warning boards - Radio remote control for forced steering, in addition to cable remote, with indicator lights on receiver as single-track control - Non-slip sand coating painted onto tread plates on gooseneck and loading area - Speed stickers 80 km/h at the rear and on both sides - Load gauge for determining axle loads, including load diagram

Stav: nový, pohotovostná hmotnosť: 12 800 kg, maximálna hmotnosť nákladu: 36 200 kg, celková hmotnosť: 49 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 850 mm, šírka ložného priestoru: 2 550 mm, výška ložného priestoru: 375 mm, veľkosť pneumatiky: 245/70 R 17.5, farba: sivý, prevádzková hmotnosť: 12 800 kg, Výbava: ABS, Gooseneck: - Gooseneck in SNT design to optimize loading platform length, length approx. 3,750 mm - Gooseneck hydraulically raisable/lowerable and detachable - Technical fifth wheel load: 25,000 kg - For tractor units: 4 x 2, 6 x 2, and 6 x 4 Loading Platform: - Low bed with external beams, designed as a telescopic vessel bridge in low-profile construction with front extension - Length 6,850 mm x width 2,540 mm - One locking position approx. every 1,000 mm on the extension Rear Chassis: - Rear chassis with closed outer frame, checker plate cover, and continuous prismatic excavator trough approx. 1,250/700 x 505 mm, open at the rear Axles, Suspension, and Tyres: - "PENDLE-AXLE", all axles hydro-mechanically forced-steered - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and locking pin for securing in lifted position - Axles finished with 2 coats of 2K acrylic paint, single color in "FAY-Grey-34-0260" - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres 245/70 R 17.5 - TPMS tire pressure monitoring system according to ECE R 14 - TPMS tire pressure sensors mounted in all wheels including spare wheels Accessories included: Knodpovy Edcsfx Anvea - Plug-in front wall made of steel, approx. 400 mm high - 3 kW electro-hydraulic unit for controlling hydraulic functions, except hydraulic winches - One spare wheel with mounting adapter - Outer beams on gooseneck with mounting holes for bolted lashing rings - Detachable ALU side walls on gooseneck, approx. 400 mm high, anodized - Detachable ALU rear wall on gooseneck, approx. 400 mm high, anodized - Checker plate cover above the gooseneck - Guide plate on gooseneck for the fifth wheel plate, approx. 500 mm wide - Operating area on gooseneck illuminated with on/off switch - Hydraulic crossbeam to support the gooseneck on the tractor unit or a dolly - 2" king pin - Anti-slip stickers on the left chamfer of the gooseneck - Rear upper part of the gooseneck closed with a removable cover - 4 wheel chocks with holders - Hydraulic connections from gooseneck to low bed with multi-coupling instead of screw couplings - 1 pair of steel ramps with climbing strips and mounting bolts for bridging the mounting hooks of the low bed - Ramps can be placed over or between the hooks - Mounting provision for steel ramps at the rear between the outer beams of the gooseneck - Prepared to accommodate bolt-on container mounts for 1x20ft on the outer beams - Mechanical pin-lug coupling from low bed to chassis for exchange of loading platform or installation of extension beams - With electro-pneumatic-hydraulic couplings - Outer beams of the low bed with integrally painted anti-slip sand layer - Removable (galvanized) loading floor in 3 sections insertable between outer beams with hardwood covering - Folding wideners, approx. 230 mm per side - Hanging bar at the front of the rear chassis for loose drive-on ramps for the low bed - 2 pairs of stake pockets recessed in the outer frame of the chassis, for plug-in stakes approx. 100 x 50 mm - Hanging bar for loose ALU ramps on the rear cross member of the vehicle - Central lubrication system with 2 pumps - Radio and cable remote control - 4 warning signs, approx. 423 mm x 423 mm, extendable - Extensive lashing positions

Stav: nový, maximálna hmotnosť nákladu: 56 570 kg, celková hmotnosť: 66 500 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 550 mm, Výbava: ABS, Celú našu ponuku vozidiel, vrátane okamžite a v krátkom čase dostupných vozidiel, nájdete na našej webovej stránke. Výpis z výbavy. Kompletná výbava na požiadanie. Podvozok: * Rám podvozku zvarený z pozdĺžnikov a priečnikov prechádzajúcich cez celý rám * Podjazdový nos vyčnievajúci cca 700 mm Kedpfowx Dctjx Anvena * Odrážacia doska min. cca 8 mm hrubá, umiestnená medzi pozdĺžnikmi * Vzdialenosť medzi priečnikmi max. 400 mm (pre pozdĺžne uloženú podlahu) * Kráľovský čap 3,5'' podľa normy SAE, vymeniteľný * Vonkajší rám ako UNP 200, otvorený smerom von Podperné nohy: * 24 t teleskopická podpera JOST - MODUL CH (Heavy Duty) S-noga Nápravy: * 4 x 10 t SAF nápravy s veľkopriemerovou bubnovou brzdou * 22,5" jednoduché obutie * Rozstup náprav cca 1 700/1 810/1 810 mm * Každý vzduchový agregát má nosnosť 10 t so zdvíhacím a spúšťacím zariadením a jedným otočným ventilom Knorr/Wabco * Uchytenie pre zdvíhacie a spúšťacie zariadenie, skrutkované prevedenie Brzdy: * Smartboard/TIM/Infocenter na držiaku pre zdvíhanie a spúšťanie, dodatočne k ventilu pre zdvíhanie a spúšťanie, bez batérie (ovládateľné iba ťažným vozidlom) * Držiak pre svetlá a brzdu vpredu na spodnom nárazníku, celková výška cca 700 mm * Kontrola tlaku v pneumatikách základná verzia, napojená na CAN-bus systém EBS * Dvojité uvoľňovacie ventily pre brzdu a pružinový akumulátor * Testovací ventil pre tlak brzdového valca vpredu vpravo * Po 1 spojovací hlavici červenej a žltej * Zdvíhacie a spúšťacie zariadenie namontované vzadu vľavo v smere jazdy * EBS brzdový systém značky Wabco, diagnostika EBS cez CAN-bus (EBS konektor), žiadny diagnostický kábel vyvedený von! Pneumatiky: * 8x 445/65 R 22.5 – značková voľba podľa dodávateľa * Stredenie kolies Mazanie: * Rozvodné lišty mazacích tŕňov na podvozkoch a vpredu na riadení. Bez centrálného mazania Nadstavba: * Bez certifikátu nadstavby podľa DIN EN 12642 XL * 2x LED pracovné svetlá hore na prednej stene (svietia dozadu), vypínač na držiaku pre zdvíhanie a spúšťanie * Predná stena pre plato, zosilnené vyhotovenie * Kontúrne označenie po bokoch žlté, vzadu žlté * Predná stena cca 800 mm vysoká, s plechovým opláštením, skrutkované prevedenie Svetelná výbava: * 2x LED pracovné svetlá, namontované na lampovej lište, s ovládaním cez spätný chod * 2x LED pracovné svetlá, ovládanie cez spätný chod, na každej strane jedna pri podpernej nohe * 2x LED cúvacie svetlo na každú stranu pred prvou nápravou * Svetelný systém/elektroinštalácia značky podľa výberu * Osvetlenie ŠPZ * Ťažné vozidlo musí poskytovať dostatočný výkon pre zvolenú svetelnú výbavu (najmä spätné svetlo) * Pozíčné svetlá vpredu, dole, biele po jednom na každej strane (LED) * Svetelná výbava 24V s veľkým multifunkčným svetlom * Bočné označovacie svetlá (LED) blikajúce * 1x 15-pin a 2x 7-pin zásuvky vpredu cez multifunkčnú skrinku * Zásuvka EBS * 1 pár vodiacich svetiel (LED) Podlaha: * Tvrdé drevo cca 28 mm striedavo s pozinkovanými omega oceľovými profilmi Lakovanie/povrchová úprava (bez metalíz): * Lakovanie podvozku v zvolenom RAL odtieni * Predná stena (oceľová konštrukcia) v zvolenom RAL odtieni * Náboj kolesa v farbe podvozku * Nápravy a podperné nohy čierne * Kolesá v hliníkovej/striebornej podobnej RAL 9006 * Matice kolies bez povrchovej úpravy * Lakovanie podjazdového ochranného zariadenia v RAL 9010 čistobiela (hliník) Príslušenstvo: * Zdvíhacie zariadenie pre 1. nápravu * Na každej strane 9 ks hákových plechov zvarené do vonkajšieho rámu. Sila utiahnutia max 3 000 daN * Na každej str