Eggers Hpt 18Zl / Tiefbett !!!! kúpiť použité (137)

Stav: použitý, pohotovostná hmotnosť: 29 600 kg, maximálna hmotnosť nákladu: 72 400 kg, celková hmotnosť: 102 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 08/2025, dĺžka ložného priestoru: 6 650 mm, šírka ložného priestoru: 2 840 mm, výška ložného priestoru: 550 mm, veľkosť pneumatiky: 285/70 R19.5, farba: sivý, Rok výroby: 2025, Výbava: ABS, Gooseneck: - Gooseneck hydraulically liftable/lowerable and detachable - Length approx. 3,650 mm - For tractor units: 6 x 4 or 8 x 4 2-axle front running gear: - Hook coupling front and rear - Chassis length x chassis width approx. 2,200 mm x 2,850 mm “TBB-A” Excavator Deck: - Telescopic excavator deck “BB-A” with drive-over bridge hooks at the front and bolt-eye coupling at the rear - Length x base width approx. 6,650 mm x 2,850 mm - Beam height x beam width approx. 400 mm x 1,350 mm Nwjdozauvropfx Ah Rjh - Loading height 550 mm with ground clearance of 150 mm 4-axle rear running gear: - Mechanical bolt-eye coupling at the front for fitting a low bed, end cross member at the rear - Chassis length x chassis width approx. 5,480 mm x 2,850 mm Pendulum axles and tyres (front and rear running gear): - "PENDULUM AXLE", all axles hydromechanically forced steered - Hose rupture valve on the axle compensation cylinder with automatic reset function - Hydraulic cylinder with shut-off valves and pre-fit plug to secure in raised position - Final painting of axles with 2 layers of single-colour MB 7350 Novagrau 2K paint - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres 285/70 R19.5 Rear steering: - Rear steering operable from the front and rear via cable remote control with push buttons, including single-track control of axles - Socket for controlling the rear steering on the gooseneck - Cable remote control with push buttons including single-track control of axles Accessories included: - Yellow-red air couplings on the galvanized front coupling bar - Steel front wall approx. 400 mm high - 4 wheel chocks - 3.5" king pin - One 7-pin socket left and right at the rear of the gooseneck for the warning sign - Crane with winch for spare wheel on the front panel of the gooseneck - Truck hydraulic connection with flow limiter (40 l/min), including crane for suspension of supply lines, tractor unit tank must hold at least 80 litres with couplings - Plug-in ALU side and tail walls approx. 400 mm high, anodized, on the gooseneck - Control levers on the gooseneck protected by a foldable cover - Separate air connection with air gun on the gooseneck - Central lubrication system BEKAMAX with standard grease NLGI-2, 1x at the gooseneck, 1x at the 2-axle chassis, and 1x at the 4-axle chassis - Variomax tool kit - Multi-coupling hydraulic connections on the gooseneck and in the area of the low bed hook coupling - 2 spare wheels - Front chassis with separate air connection for air wrench - Foldable extensions with steel deck slabs, width adjustable from approx. 2,850 mm to approx. 3,250 mm - Steel deck slabs can be inserted in 2 positions to achieve a lowered loading platform - Steel deck slabs with rubber floor covering approx. 12 mm thick - Threaded hole option (⌀ 40 mm) every approx. 500 mm outside on the upper chord of the external excavator deck tube for screw-in rings - 2 stainless steel toolboxes (INOX) approx. 855 x 340 x 390 mm left + right on the gooseneck - Radio remote control for the rear steering in addition to the cable remote control - 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery - Steel deck slabs adjustable from 2,850 mm to 3,250 mm wide and insertable in 2 positions for a lowered loading platform - 4 pairs of steel deck slabs with approx. 12 mm thick rubber floor covering - Maximum 3,500 mm extendable beam can be covered, in steps of 500 mm - Central carrier of the low bed provided with a painted sand la

Stav: použitý, najazdené kilometre: 261 000 km, výkon: 85 kW (115,57 k), prvá registrácia: 06/2017, typ paliva: nafta, farba: červená, typ prevodu: mechanický, emisná trieda: Euro 6, dĺžka ložného priestoru: 380 mm, Rok výroby: 2017, Výbava: klimatizácia, posilňovač riadenia, vozidlo s pevným sklápacím ložiskom, poloplachtové bez plachiet a zadných dverí dĺžka ložiska: 2,80 m užitočné zaťaženie: 1 200 kg vozidlo sa predáva v stave, v akom sa nachádza, bez záruky JEMNÝ ÚNIK NAFTY Z VSTREKOVACEJ PUMPY možnosť skúšobnej jazdy poplatok za prepis nie je zahrnutý v cene DPH 22% nie je zahrnutá pre viac informácií WhatsApp alebo volať na číslo uvedené voliteľné funkcie sa môžu líšiť od zoznamu Nwsdpfx Asyxh Hieh Rsh

Stav: nový, maximálna hmotnosť nákladu: 73 540 kg, celková hmotnosť: 102 000 kg, konfigurácia náprav: 3 nápravy, Výbava: ABS, Our complete vehicle inventory, including immediately and short-term available vehicles, can be found on our website. Excerpt from the equipment. Full specifications available on request. Gooseneck: * Gooseneck hydraulically height-adjustable and detachable, length approx. 3,650 mm * 2 pairs of folding lashing rings on the outer side (LC 5,000 daN) * 2 pairs of lashing rings on the gooseneck (LC 10,600 daN) * 1 pair of lashing rings at the center section of the gooseneck (LC 10,600 daN) * For 6x4 or 8x4 2-axle tractor units Compact front axle assembly: * Hook coupling front and rear, length approx. 2,200 mm * Chassis width: approx. 2,850 mm Excavator deck: Telescopic excavator deck with drive-over bridge hooks at the front and pin-eye coupling at the rear * Base width: approx. 2,850 mm * Length: approx. 6,650 mm * Beam height: approx. 400 mm * Beam width: approx. 1,350 mm * Loading height approx. 550 mm at ground clearance approx. 150 mm 4-axle rear axle assembly: * Mechanical pin-lug coupling for installing a low-bed at the front * Rear cross member, chassis width: approx. 2,850 mm * Chassis length: approx. 5,480 mm Pendulum axles, all axles hydro-mechanically forced-steered * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation Tyres * Front axle assembly: * 8 x manufacturer’s choice (M+S) 285/70 R19.5 * Rear axle assembly tyres: * 16 x manufacturer’s choice (M+S) 285/70 R19.5 * Load index 150/148J Paintwork: * Complete steel structure automatically shot-blasted after welding using a shot wheel blast system. Second blasting operation with corundum for optimum adhesion of the coating system * HRM metallisation of the entire chassis using ZINACOR 850 (85% zinc/15% aluminium) to guarantee best corrosion protection * Final coating with 2 layers of 2K top coat, single colour in RAL 3002 carmine red, according to RAL 841GL system Including the following accessories * Steel front wall, approx. 400 mm high * Removable ALU side walls and rear wall on the gooseneck, approx. 400 mm high, anodised version * 3.5-inch kingpin * Truck hydraulic connection with flow regulator (20 l/min) * Gantry for suspending supply lines, the tank of the tractor unit must hold at least 80 l * With MAX Trailer coupling pieces, otherwise coupling pieces to be provided by the customer ex works * BEKA-MAX central lubrication system for one gooseneck with universal grease NLGI-2 * Tool kit item no. 612452 * Multi-coupling hydraulic connections on the gooseneck Nedpfxjxbmpls Ah Rjwh * Front axle assembly with a separate air connection for air screwdriver * BEKA-MAX central lubrication system for a 2-axle bogie with universal grease NLGI-2 * One 7-pin socket left and right at the rear of the front axle assembly for warning signs * Screw-in option (diameter approx. 40 mm) every approx. 500 mm on the upper flange of the outer tube of the excavator deck for screw-on rings (LC 16,000 daN) * Folding extensions with steel pads, adjustable in width from approx. 2,850 mm to approx. 3,250 mm * BEKA-MAX central lubrication system for a 4-axle bogie with universal grease NLGI-2 * At the rear axle assembly a socket for the cable remote control of the rear axle steering * Rear bogie with trough * Two INOX toolboxes, approx. 855 x 340 x 390 mm, on the gooseneck, left and right * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery * Radio remote control: * Operation of the powerpack, start/stop of the diesel engine * Operation of the rear axl

Stav: nový, maximálna hmotnosť nákladu: 30 190 kg, celková hmotnosť: 43 000 kg, konfigurácia náprav: 2 nápravy, Výbava: ABS, You can find our complete range of immediately and short-term available vehicles on our website. Excerpt from the equipment list. Full specification available upon request. Loading platform: - Low bed with externally mounted beams, extendable in SUPER LOW design, approx. 6,850 mm long - Low bed with fixed hardwood floor, approx. 40 mm thick, with mechanical locking - Supply lines are protected within the extendable beams and automatically adjust to the current low bed length - 5 pairs of outward-folding lashing rings (LC 10,000 daN) - 6 pairs of threaded blocks on the inner beam for mounting screw-in RUD rings Gooseneck: - Gooseneck in SNT design for optimum loading length, approx. 3,750 mm long - Gooseneck hydraulically lift/lowerable and removable - Technical fifth-wheel load: 23,000 kg - Suitable for tractor units (4x2, 6x2) Rear chassis: - Rear chassis in short design with closed outer frame and chequer plate cover - Chassis with excavator recess, closed at the rear section for housing air tanks - 2 pairs of outward-folding lashing rings (LC 5,000 daN) - 1 pair of outward-folding lashing rings (LC 10,000 daN) Nwjdpexarl Nofx Ah Rsh - 1 pair of horizontal lashing rings at front & rear of the chassis (LC 10,000 daN) Axles: - BPW axles with hydro-mechanical forced steering - Technical axle load: 12,000 kg each - Air suspension with lift/lower valve Tyres: - 245/70 R 17.5 3PMSF tyres, brand of our choice - Load index (146/146F) - TPMS tyre pressure monitoring system (ECE R 141 compliant) - Data transfer to tractor via standardised EBS interface per ISO 11992 - For proper display, the tractor unit must be able to transmit and display these data Brake system: - Brake system compliant with EU regulations with EBS-E (2S2M) Electrical system: - Electrical system per EU regulations, lighting 24 V ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX at the front wiring harness with sockets 24N, 24S & 15 pin according to ISO: 24N ISO-1185, 24S ISO-3731, 15 pin ISO-12098 Steel construction: - Steel structure made of high-strength fine-grained steels - Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: - Entire steel structure automatically shot-blasted after welding - Second blasting with corundum for optimal coating adhesion - Whole vehicle chassis metalized with ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection - Final coat with 2 layers of 2K topcoat, single-colour in RAL 3002 Carmine Red, per RAL system 841GL - Rims in silver - Rear section metalized and painted in RAL 9010 (Pure White) - No metallic finishes possible - Paint structure salt spray-tested per ISO 9227-NSS - Cavities sealed with special wax Includes the following additional equipment: - 2-inch king pin - One galvanized steel front wall, approx. 400 mm high - Remote steering at front and rear via cable remote control with push buttons, incl. single-wheel tracking (without installation in tractor unit) - Hydraulic connections from gooseneck to low bed via multi-coupling instead of screw couplings - Electro-hydraulic power unit - Preparation for mounting screwed container locks for one 20' or one 40' container on the outer beams - No container locks included

Stav: nový, maximálna hmotnosť nákladu: 36 040 kg, celková hmotnosť: 53 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, Náš kompletný aktuálny vozový park so strojmi dostupnými ihneď aj v krátkodobom horizonte nájdete na našej webovej stránke. Výpis zo špecifikácie. Kompletné vybavenie na vyžiadanie. Labutia šija: * Labutia šija v dizajne SNT na optimalizáciu dĺžky ložnej plochy, dĺžka cca 3 750 mm * Labutia šija hydraulicky zdvíhateľná/spúšťateľná a zjazdná * Pre ťahače: 6 x 4 alebo 8 x 4 Nízka ložná plošina: * Nízka ložná plošina s vonkajšími nosníkmi, v predĺžiteľnom SUPER LOW dizajne, dĺžka cca 8 000 mm * Nízka ložná plošina s pevným tvrdodrevným dnom, hrúbka cca 40 mm a mechanické uzamykanie * Prívodné vedenia vedené bezpečne v predĺžiteľných nosníkoch, automaticky sa prispôsobujú dĺžke ložnej plochy * 7 párov sklopných upevňovacích krúžkov smerom von (LC 10 000 daN) * 6 párov závitových blokov na vnútornom nosníku na montáž skrutkovacích RUD-krúžkov Podvozok vzadu: * Podvozok vzadu s uzavretým vonkajším rámom a krytom z ryhovaného plechu * Podvozok s výrezom na bagre, v zadnej polovici uzavretý pre uloženie vzduchových nádrží * 3 páry sklopných upevňovacích krúžkov smerom von (LC 5 000 daN) * 1 pár sklopných upevňovacích krúžkov smerom von (LC 10 000 daN) * 1 pár ležiacich upevňovacích krúžkov, vpredu aj vzadu na podvozku (LC 10 000 daN) Nápravy: * BPW nápravy a zavesenie, všetky nápravy hydro-mechanicky nútene riadené * Technické zaťaženie nápravy: po 12 000 kg * Vzduchové odpruženie so zdvíhacím a spúšťacím ventilom Obutie: * Pneumatiky 245/70 R 17.5 3PMSF – podľa výberu výrobcu. Index nosnosti (146/146F) Brzdový systém: * Brzdový systém WABCO podľa noriem EÚ s EBS-E (2S2M) Lakovanie: * HRM metalizácia celého podvozka vozidla s ZINACOR 850 (85% zinok/15% hliník) pre najlepšiu ochranu proti korózii * Záverečný lak dvojvrstvový 2K vrchný lak, jednofarebný, v RAL 3002 karmínovo červená, podľa RAL systému 841GL Vrátane príslušenstva: * 2-palcový kráľovský čap * Pozinkovaná čelná stena z ocele, cca 400 mm vysoká * Na pozinkovanej spojovacej lište vpredu žlto-červené vzduchové spojky * Ovládanie riadenia náprav vpredu aj vzadu prostredníctvom káblového diaľkového ovládania s tlačidlami, s kontrolou stopového vedenia náprav (bez inštalácie do ťahača) * Príprava na montáž skrutkovacích držiakov kontajnerov pre 1 x 20', 1 x 40' alebo 1 x 45' kontajner na vonkajšie nosníky. Bez uzamykania kontajnera * Hydraulické prípojky z labutej šije k nízkej ložnej plošine s multikonektorom namiesto skrutkovacích spojok * Elektro-hydraulická jednotka Nwsdpfx Ahjy Uwu Io Rsh * Špirálový kábel na napájanie elektro-hydraulickej jednotky a/alebo elektrického navijaka (cca 35 mm², cca 3,5 m dĺžka, max. 250A) medzi návesom a ťahačom so zásuvkou (NATO-NATO) * Žltý reflexný pás podľa EÚ noriem po bokoch, na výsuve a vzadu na návesu * Na labutej šiji a na zadnej časti vľavo aj vpravo držiak na výstražné tabule vrátane zásuvky * Príručka a popis na USB kľúči * Centrálne mazanie s 2 pumpami BEKAMAX (Pico) s bežným mazivom NLGI-2 a s odnímateľným krytom na pumpách * 7 párov závitových blokov medzi upevňovacími krúžkami pod horným pásom na vonkajšom nosníku pre montáž skrutkovacích RUD krúžkov VLBG-4 * Druhá jazdná výška, cca 50 mm nad bežnou polohou, ovládaná ručne * Demontovateľné ALU bočnice a zadná stena na labutej šiji, cca 2440 x 400 mm (dĺžka x výška). Zadné pozinkované zasúvacie stĺpiky sú odnímateľné (dĺžka nadstavby cca 2560 mm) * Samostatný vzduchový prípoj s vzduchovou pištoľou na labutej šiji * INOX náradový box, cca 1350 x 400 x 400 mm

Stav: nový, maximálna hmotnosť nákladu: 29 260 kg, celková hmotnosť: 42 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 200 mm, výška ložného priestoru: 900 mm, celková šírka: 2 550 mm, celková výška: 3 570 mm, Rok výroby: 2025, Výbava: ABS, Kässbohrer SLAR3 Extendable Lowbed with Wheel Wells Technical Specifications: Model and Manufacturer: - Model: Kässbohrer K.SLA R 3 / 1N - 18 / 30 - Manufacturer: Kässbohrer - Type: Extendable lowbed semi-trailer with wheel wells, suitable for transporting vehicles and heavy machinery. Nsdpjx Epaqofx Ah Rjwh Dimensions: - Overall length: 13,190 mm - Gooseneck length: 3,950 mm - Platform length: 9,240 mm - Extension: 3,500 mm (Pe) - Total width: 2,550 mm (expandable by 600 mm via side extensions) - Fifth wheel coupling height: 1,250 mm - Platform height: 875 mm - Ramp length: 2,750 mm - Ramp width: 850 mm - Wheelbase: 7,800 mm - Axle spacing: 2,260 mm Weights and Capacities: - Permissible total weight: * 52,800 kg at 60 km/h * 48,000 kg at 80 km/h - Unladen weight: 12,744 kg ±3% - Axle load capacity: 30,000 kg (10 tonnes per axle) - Kingpin load: 18,000 kg Axle Equipment: - Number of axles: 3 (2 rigid at front, 1 trailing axle at rear) - Lift axle: Manually, load-dependent (1st axle) - Axle make: BPW axles with drum brakes Tyres and Rims: - Tyre size: 245/70 R17.5 - Tyre brand: GOODYEAR - Tyre markings: M+S label and 3PMSF marking - Tyre pressure monitoring system: Improves fuel efficiency and extends tyre life - Number of rims: 12 pieces (steel rims, offset ET120) Chassis and Suspension: - Suspension: Air suspension with load gauge - Brake system: Two-line compressed air brake by WABCO, EBS 4S/3M with ABS and RSS (roll stability support) Lighting and Electrics: - Lighting system: 24V, multi-chamber lamps by ASPÖCK, LED side markers and tail lights - Coupling type: Standard yellow/red air supply connection - Sockets: NATO socket with 2 x 50 mm² intermediate cables (3 m length) Ramps: - Type of ramps: Foldable hydraulic loading ramps with sliding mechanism - Capacity: 40 tonnes - Ramp surface: Made of hardwood - Safety: Ramp securing chain included Load Securing: - Lashing rings: * 2 x 2 with 5,000 daN loading capacity each * 1 x 2 with 10,000 daN loading capacity at the gooseneck * 4 x 2 lashing rings with 6,000 daN capacity in the well area - Container lock housings: Suitable for transporting 1 x 20 FT or 1 x 30 FT container - Stake pockets: 5 x 2 stakes (50 mm x 100 mm) Special Features: - Gooseneck: With 90° vertical edges, stable and durable - Floor covering: 45 mm thick hardwood and steel deck with anti-slip pattern - Wheel well bridge: Sections made of hardwood with sheet steel supports to cover wheel wells - Toolbox: PVC-coated steel, dimensions 750 x 400 x 360 mm Colours: - Chassis: Traffic red (RAL 3020) / also available in black - Partial metal coating of contact surfaces Condition: New and immediately available. - Perfectly suited for heavy haulage and use in the construction industry or machinery relocation.

Stav: nový, Rok výroby: 2023, nosnosť: 2 500 kg, farba: zelený, Výbava: Kontrola bezpečnosti UVV, * Tandemové kolieska * Guma-Poly Robustný ručný paletový vozík CLARK HPT Eco sa vyznačuje jednoduchou obsluhou a vysokou spoľahlivosťou v prevádzke. S nosnosťou až do 2500 kg sú tieto vozíky univerzálne použiteľné vo výrobe, v obchode, skladoch aj v dielňach. Vďaka pevnej oceľovej konštrukcii sú ručné paletové vozíky spoľahlivé aj pri náročných pracovných podmienkach. Pomocou proporcionálneho ventilu je možné plynulo a citlivo spúšťať vidlice aj pri ťažkých nákladoch. Vozíky bodujú aj nízkou vlastnou hmotnosťou a vysokou obratnosťou, čo je obzvlášť výhodné pri obmedzenom priestore. Nwsdpfx Ahoyzm Hgo Rjh Všetky ceny sú uvedené bez 19% DPH. Zmena cien a predaj vyhradený.

Stav: použitý, maximálna hmotnosť nákladu: 36 100 kg, celková hmotnosť: 49 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 10/2024, ďalšia kontrola (TÜV): 10/2026, celková šírka: 2 550 mm, Výbava: ABS, Our complete vehicle inventory, including immediately and short-term available vehicles, can be found on our website. Excerpt from the equipment list. Full equipment details available upon request. Gooseneck: * Gooseneck in SNT design for optimized loading platform length, approx. 3,750 mm, hydraulically liftable/lowerable and detachable * Technical fifth wheel load: 25,000 kg * Suitable for tractor units: 4x2, 6x2, and 6x4 Lowbed: * Lowbed designed as a telescopic trough deck in low-profile construction with front extension and mechanical locking * Dimensions (L x W) approx. 6,850 mm x 2,540 mm * Supply lines are protected within the extendable beams and automatically adjust to the lowbed length Axles and suspension: * PENDLE AXLE * All axles hydro-mechanically forced-steered * Hose rupture valve on axle compensation * Cylinders with automatic RESET function * Hydraulic cylinders with shut-off valves and stop plug for securing in raised position * Technical axle load: 12,000 kg per axle * Hydraulic axle equalization * Tires: 245/70 R 17.5 * Rear running gear with closed outer frame, chequer plate cover, continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear Brake system: * WABCO EBS-E braking system according to EU regulations, without connection cable to the tractor Paintwork: * Trailer color, RAL 3002 Carmine Red Accessories included: * Plug-in front wall, steel, approx. 400 mm high * 3 kW electro-hydraulic unit for controlling hydraulic functions, except for hydraulic winches, without installation of supply connections to the tractor * External beams on gooseneck with mounting holes for bolt-on lashing rings. First hole approx. 200 mm from front, then every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring each left and right on rear bevel of gooseneck (LC 6,000 daN) * 2" king pin * One locking point every approx. 500 mm on the extension Nsdpjx Uvllefx Ah Rewh * 1 pair of steel ramps with climbing strips and locking bolts for bridging the lowbed mounting hooks * 1 lashing ring each left and right on front cross member (LC 10,000 daN) * Lashing rings with retaining spring every approx. 1,200–1,300 mm on outer sides of inner beams * Lashing rings with retaining spring every approx. 1,200–1,300 mm on outer chassis beams (LC 10,000 daN) on the top chord of the outer beams * Cutouts above the lashing rings * 1 suspended lashing ring each left and right on the rear cross member (LC 10,000 daN) on the outer beams of the platform * Preparation for removable load floor * Hanging rail at the front of rear undercarriage for lowbed for loose approach ramps * Undercarriage with beveled rear corners * Hanging rail for loose aluminum approach ramps on rear end cross member * Remote steering from front and rear via cable remote control with push buttons, axle tracking function, without installation in tractor * Mechanical bolt-tab coupling from lowbed to undercarriage, for changing platform or installing extension beams, with electro-pneumatic-hydraulic couplings * Round NATO socket on front connector strip (Maeler & Kaege VG 96 917) * 2 axle load gauges mounted on the left side Including special equipment: * On the gooseneck, 1 pair of plug-in aluminum side walls approx. 400 mm high, anodized

Stav: použitý, maximálna hmotnosť nákladu: 21 130 kg, celková hmotnosť: 34 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 10/2024, ďalšia kontrola (TÜV): 11/2026, celková šírka: 2 540 mm, celková výška: 1 980 mm, Výbava: ABS, Kässbohrer SLL 2-axle low-bed trailer with hydraulic steering Highlight: Optionally available for rent as a complete combination with the depicted truck. Manufacturer: Kässbohrer Model / Vehicle Code: K.SLL 2 / 2H ? 18 / 20 Vehicle Type: Low-bed semi-trailer Country of Registration: Germany Brand: Kässbohrer Chassis Color: RAL 3020 Traffic Red Dimensions & Weights * Overall length: 13,210 mm * Overall width: 2,540 mm * Coupling height (H5): 1,250 mm * Platform height (unladen): 910 mm * Platform height (laden): 300 mm * Platform length: 6,810 mm * Extension: 5,550 mm * Gooseneck length: 3,600 mm * Rear swing door: 2,100 mm * Platform thickness: 200 mm * Wheelbase: 10,530 mm * Axle spacing: 1,360 mm * Unladen weight: approx. 12,873 kg (±3 %) * Gross weight (40 / 60 / 80 km/h): 42,000 kg * Axle load total: 24,000 kg * Permissible king pin load: 18,000 kg (40 / 60 / 80 km/h) Chassis & Axles * 2 axles * 2 hydraulically steered axles * Axles: BPW * Suspension: Air suspension * Suspension stroke: 260 mm (190 mm / -70 mm) * Additional raising of ride level by 40 mm possible * Load gauge for axle load display * Semi-automatic centering for steered axles with warning light sensor Braking System * WABCO EBS 2S/2M * ABS (Anti-lock Braking System) * RSS (Roll Stability Support) * Brake system according to UN ECE R13 Electrics & Lighting * 24V LED lighting system * 2 x 7-pin + 1 x 15-pin socket * LED brake lights * LED rear and fog lights * Electric system acc. to UN ECE R48 & ADR * LED work lights at rear (2 pcs, reverse gear-controlled) * LED beacon (1 pc) Tyres & Rims * Tyre size: 245/70 R17.5 * Tyres: M+S Nwjdpfjycnbajx Ah Roh * 3PMSF (winter rated) * Tyre pressure monitoring system acc. to R141 * Number of wheels: 9 complete wheels * Rims: Steel rims (Kässbohrer’s choice) * Spare wheel bracket: 1 pc on gooseneck Steering & Operation * Hydraulic steering on both axles * Control panel in the vehicle * Remote control for external steering * Multifunctional WABCO Smartboard * Axle load indicator * Suspension control * Tyre and brake wear indication * Breakdown and system monitoring Chassis & Frame * High-strength steel S700 MC (ISO 1726) * Welded bogie-bed connection * Partial metallization (85% zinc / 15% aluminum) on outer frame & gooseneck * Adjustable and detachable gooseneck * 1 x 2 hydraulic cylinders, 220 bar operating pressure * King pin: 2 inch, bolted * King pin position: single Platform & Body * 3 removable platforms with hardwood flooring * Dimensions per platform: 100 x 1,300 x 2,115 mm * Weight per platform: 225 kg * 2 lashing rings per platform, each with 8,000 kg tensile strength * Platform widening: 225 mm, galvanized * Extension brackets: 12 x 2 pcs, galvanized Load Securing Lashing rings: * 1 x 2 pcs 13.4 t on gooseneck * 7 x 2 pcs 13.4 t * 4 x 2 pcs 8 t in low-bed * 2 x 2 pcs 13.4 t * 3 x 2 pcs 8 t on rear platform Stake pockets: * 6 x 2 pcs in well (50 x 100 mm) * 3 x 2 pcs at rear (50 x 100 mm) Accessories & Fittings * Aluminum front panel, gooseneck: 360 x 1,550 mm * Aluminum side walls: 360 x 1,900 mm * Aluminum rear wall: 360 x 2,480 mm * Toolboxes left & right (500 x 350 x 400 mm) * Centralized lubrication system * Side underrun protection acc. to ECE R73 * Warning

Stav: nový, pohotovostná hmotnosť: 11 000 kg, maximálna hmotnosť nákladu: 27 000 kg, celková hmotnosť: 38 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 300 mm, šírka ložného priestoru: 2 550 mm, veľkosť pneumatiky: 235/75 R17.5, farba: sivý, prevádzková hmotnosť: 11 000 kg, Výbava: ABS, Chassis: - Welded steel frame construction with front and rear frame cranking and lowbed without rear bevel - Gooseneck + king pin plate 225 mm - Lowbed designed for point load of 25 t over 5 m - Outer frame closed to the outside with welded lashing rings for securing cargo - Interchangeable 2" king pin - Rear hanging track for aluminum ramps Axles and Tyres: - BPW low loader axles, each with 10 t axle load, air bellows diameter 360 mm - Air suspension with lifting and lowering device, lift 220 mm (-60/+160 mm) - Wabco SmartBoard with ECAS function for 2 coupling heights + 100 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - IVTM tire pressure monitoring system - 9 tires 235/75 R 17.5, tubeless Steering: - 1st and 2nd axle hydraulically forced steering via fifth wheel coupling Floor: - Laminated multi-layer floor, 27 mm thick, flush with outer frame and longitudinal beams - Reinforced underneath with GRP coating - 12 pairs of lashing rings welded into the outer frame (8 pairs RUD 8 t – 6 pairs in the lowbed as well as one pair each on the gooseneck and at the start of the rear compartment – 2 pairs each of 4 t lashing rings on the gooseneck and rear compartment) - 6 pairs of mushroom lashing points in the outer frame lowbed - Storage compartment with lid in the lowbed floor front left and right Front Wall: - 25 mm aluminum hollow profiles extended up to the lower roof edge with integrated curtain tensioning device Curtain Sides: - Curtains on both sides with welded-in vertical and horizontal straps (spacing approx. 600 mm) and tension locks made of stainless steel - Adjustable curtain straps (over-center type) for loading width up to 4,000 mm including curtain extension with press studs and Velcro fastener - Curtain extension to the driving direction: 300 mm, in height: 750 mm - With eyelets for loose curtain extension part - 1 pair of vertical curtain pockets approx. 1,000 mm long, positioned in the lowbed at the front cranking - With strap pockets Rear Wall: - Steel tail portal frame with side curtain retaining bracket - Aluminum double-wing door, 25 mm thick - Both door wings fully folding with door retainers - Each door wing with one double hinge and two recessed grip pockets Front Corner Posts: - At roof height, bolted to the front end Center Posts: - 3 pairs of infinitely adjustable folding posts - Posts are movable along the entire length by means of rollers - Center posts in lowbed also fixable at the rear platform Roof: - EDSCHA sliding roof (galvanized) with transverse bows, can be shifted in both directions (pushed together at the front in the load area) - Rear portal crossbar can be swivelled away - PVC tarpaulin roof without customs closure - Manual hydraulic lifting roof on both sides, lift 450 mm - Retractable roof can be operated in front (9x50) and rear (9x50) raised positions - Including curtain extension and curtain tail at the rear - Roof canopy at the very front of the front wall, each extendable by 900 mm with crank Accessories: - Extensible warning signs (removable at front and rear with socket), incl. position lights up to loading width of 4,000 mm - Storage for 4 warning signs inside front wall, top right and left - 1 aluminum ladder with holder, 2,500 mm long, at the front wall - 2 rows of self-locking aluminum slats - Sheet metal fenders with mud flaps - 1 night parking sign and 1 ADR sign on the rear wall Nedpfoiu Eu Nox Ah Rjwh - Central lubrication system BEKAMAX with pump and grease

Stav: nový, pohotovostná hmotnosť: 29 600 kg, maximálna hmotnosť nákladu: 72 400 kg, celková hmotnosť: 102 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 6 650 mm, šírka ložného priestoru: 2 840 mm, výška ložného priestoru: 550 mm, veľkosť pneumatiky: 285/70 R19.5, farba: sivý, prevádzková hmotnosť: 29 600 kg, Výbava: ABS, Gooseneck: - Hydraulically liftable/lowerable and detachable gooseneck - Length approx. 3,650 mm - For tractor units: 6 x 4 or 8 x 4 2-Axle Front Bogie: - Hook couplings front and rear - Chassis length x width approx. 2,200 mm x 2,850 mm Excavator Deck “BB-A”: - Telescopic excavator deck “BB-A” with drive-over deck hooks at the front and pin & lug coupling at the rear - Length x base width approx. 6,650 mm x 2,850 mm Nwodpfewcmhaox Ah Rjh - Beam height x beam width approx. 400 mm x 1,350 mm - Loading height 550 mm with 150 mm ground clearance 4-Axle Rear Bogie: - Mechanical pin & lug coupling at the front for attaching a lowbed, end cross-member at the rear - Chassis length x width approx. 5,480 mm x 2,850 mm - Extensive lashing positions Pendulum Axle and Tyres (front and rear chassis): - “PENDULUM AXLE”, all axles hydro-mechanically forced steered - Burst protection valve on axle compensation cylinder with automatic reset function - Hydraulic cylinders with shut-off valves and locking pins to secure in lifted position - Final axle coating with 2 coats of 2K paint, single colour in MB 7350 Novagrau - Technical axle load: 12,000 kg - Hydraulic axle balancing - Tyres: 285/70 R19.5 Follow Steering: - Remote steering from front and rear via cable remote control with push buttons, including single-track steering monitoring - Socket on gooseneck for steering control - Cable remote with push buttons and single-track control included Accessories included: - Galvanised connection bar at the front with yellow/red air couplings - Steel front wall approx. 400 mm high - 4 wheel chocks - 3.5" king pin - One 7-pin socket left and right at the rear of the gooseneck for warning panel - A-frame with winch for spare wheel at front end of gooseneck - Truck hydraulic connection with flow regulator (40 l/min), including bracket for supply line suspension; tractor fuel tank must be at least 80 litres, incl. couplers - Detachable ALU side walls and rear board on gooseneck, approx. 400 mm high, anodised - Control lever on gooseneck protected by a foldable cover - Separate air connection with blow gun on gooseneck - BEKAMAX central lubrication system, 1x on gooseneck, 1x on 2-axle bogie, 1x on 4-axle bogie - Variomax tool kit - Multi-coupler hydraulic connections on gooseneck and at lowbed hook bracket - 2 spare wheels - One 7-pin socket left and right, front and rear on rear chassis for warning panel - Front chassis with separate air connection for pneumatic screwdriver - Folding widening extenders with steel panels, width adjustable from approx. 2,850 mm to 3,250 mm - Steel panels can be positioned in two places to create a lowered loading platform - Steel panels with approx. 12 mm rubber floor covering - Threaded bushings (⌀ 40 mm) spaced approx. every 500 mm on the outer flange of the excavator deck for lashing rings - One locking position approx. every 500 mm on the extension with mechanical locking - Socket on rear chassis for cable remote control steering - 2 reversing lights on rear panel - Four warning panels, extendable by approx. 2,000 mm each, approx. 423 x 423 mm, with position light - 1 work lamp left + right on rear panel of gooseneck, separately switchable - Two INOX toolboxes, approx. 855 x 340 x 390 mm - 1-cylinder Hatz diesel engine (Silent Pack) - Radio remote control for follow steering

Stav: nový, pohotovostná hmotnosť: 17 500 kg, maximálna hmotnosť nákladu: 43 500 kg, celková hmotnosť: 61 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 7 550 mm, šírka ložného priestoru: 2 750 mm, výška ložného priestoru: 400 mm, veľkosť pneumatiky: 245/70 R 17.5, farba: sivý, Výbava: ABS, Neck (Gooseneck): - Gooseneck in SNT design for optimizing loading platform length, approx. 3,750 mm long - Gooseneck hydraulically liftable/lowerable and detachable - For tractor units: 6x4 or 8x4 Nwedpfx Ahsh Hm Ths Reh Deck (Lowbed): - Lowbed with external beams, extendable design, "SUPER LOW" type, approx. 7,550 mm long - Lowbed with fixed hardwood floor, approx. 40 mm thick, with mechanical locking - Service lines protected and routed within the extendable beams, automatically adjusting to the respective lowbed length Rear chassis: - Rear chassis with closed outer frame, checker plate surface, and continuous prism excavator trough, approx. 1,450/900 x 505 mm, open at the rear - 2 pairs of stake pockets (100 x 50 mm) on the outer frame for plug-in stakes Axles and tires: - "PENDULUM AXLE", all axles forced-steered hydromechanically - Burst pipe valve to axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and plug pin for securing in raised position - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tires 245/70 R 17.5 / 3PMSF Accessories included: - Prepared for mounted container locks for 1x 20ft or 1x 40ft container on outer beams - 2" king pin - One galvanized steel front wall, approx. 400 mm high - One spare wheel with holder - Yellow-red air couplings on the galvanized front connector strip - 4 wheel chocks - Remote steering front and rear operated by wire remote control via pushbuttons, with single-track axle alignment control - Hydraulic couplings between gooseneck and lowbed as multi-coupling instead of screw type - Electro-hydraulic power pack - White reflective tape as per EU regulations on the sides, at the extension and red on the rear - 2 wooden blocks 500x250x200 mm - European reflective warning panels (red-yellow) at trailer rear - On gooseneck and rear section: holders for warning signs with sockets left and right - Central lubrication system with 2 BEKAMAX (Pico) pumps, standard grease NLGI-2 - Load gauge to determine axle loads, incl. load chart - On gooseneck, plug-in aluminum side walls and rear wall approx. 2,000 x 400 mm - Rear galvanized plug-in stakes removable (body length approx. 2,120 mm) - Separate air connection with air gun on the gooseneck - Duomatic air coupling from gooseneck to lowbed - Gooseneck closed at rear upper section with removable cover - 1 pair of steel ramps for bridging the lowbed receptacle hooks - Four approx. 400 mm extendable warning signs, approx. 423 x 423 mm - Radio remote control for rear steering in addition to cable remote, with receiver indicator lights for single-track alignment - 6 pairs threaded blocks between lashing rings under top chord on outer beam for installation of screwable RUD rings VLBG-4 - 7 pairs of stake pockets (100 x 50 mm) in outer frame of load platform - Folding extensions, approx. 230 mm per side - Anti-slip sand coating painted on load platform - Dipper stick trough at front and rear of rear chassis closed with plug-in plates - HRM Metallization (High Resistance Metallization) of the outer frame - Complete steel construction shot-blasted, then defined visible surfaces metallized with ZINACOR 850 (Zinc 85% - Alu 15%) by hot finishing

Stav: nový, pohotovostná hmotnosť: 17 250 kg, maximálna hmotnosť nákladu: 48 700 kg, celková hmotnosť: 66 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 7 550 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 375 mm, veľkosť pneumatiky: 245/70 R 17.5, farba: sivý, prevádzková hmotnosť: 17 250 kg, Výbava: ABS, Labutia tyč (Schwanenhals): - Labutia tyč v SNT dizajne na optimalizáciu dĺžky ložnej plochy, dĺžka cca 3 750 mm - Hydraulicky zdvíhateľná/spúšťateľná a zjazdná labutia tyč - Pre ťahače: 6 x 4 a 8 x 4 (alebo 6 x 4 s voliteľným jednoosovým dolly) Nízka ložná plocha (Tiefbett): - Nízka ložná plocha s vonkajšími nosníkmi, vyhotovená ako teleskopický most na kotly v nízkom prevedení s výsuvom vpredu - Rozmery: dĺžka x šírka cca 7 550 mm x 2 740 mm - Mechanické uzamykanie výsuvu Podvozok: - Zadný podvozok s uzavretým vonkajším rámom - Rebrovaný plechový povrch a priebežná prizmatická výrezová „baggermulda“ cca 1 450/900 x 505 mm, vzadu otvorená Nápravy, pruženie a pneumatiky: - „PENDEL-AXLE“ – všetky nápravy sú hydromechanicky riadené - Ventil proti prasknutiu hadíc na vyrovnávacích valcoch náprav s automatickou funkciou RESET - Hydraulické valce s uzatváracími kohútikmi a predpínačmi na zaistenie vo zdvihnutej polohe - Záverečný lak náprav: 2 vrstvy dvojzložkového laku v jednotnej farbe „FAY-Grau-34-0260“ - Technická nosnosť nápravy: 12 000 kg - Hydraulické vyrovnávanie záťaže na nápravy Nodjh Hm Tzjpfx Ah Rewh - Pneumatiky: 245/70 R 17.5 Príslušenstvo: - Predná stena z ocele, zasúvateľná, výška cca 400 mm - 4 ks kliny pod kolesá - Zadná horná časť labutej tyče zakrytá odnímateľným krytom - 1 pár oceľových nájazdových rámp so slikrami a upevňovacími kolíkmi pre mostíky na uchytenie do nízkej ložnej plochy - Rampy je možné položiť nad alebo medzi háky - Možnosti upevnenia oceľových nájazdových rámp vzadu medzi vonkajšími nosníkmi labutej tyče - Zaisťovacie miesta každých cca 1 000 mm na výsuve - 1 upevňovací krúžok vľavo a vpravo na prednom priečniku - Pripojovací panel pre napájacie vedenia k ťahaču, umiestnený na úrovni vonkajšieho rámového profilu - 6 párov závitových blokov na vonkajšej strane vnútorných nosníkov ložnej plochy pre montáž skrutkovacích krúžkov M24 - 6 párov zapustených upevňovacích krúžkov na vonkajšej strane vonkajších nosníkov ložnej plochy, sklopné dovnútra aj von - 1 pár závitových blokov vpredu a vzadu na vonkajších nosníkoch ložnej plochy pre montáž skrutkovacích krúžkov M24 - Závesná lišta pre voľné hliníkové nájazdové rampy na zadnom priečniku vozidla - Centrálne mazanie s dvoma čerpadlami značky BEKAMAX - Riadenie zadnej nápravy vpredu aj vzadu, ovládateľné káblovým diaľkovým ovládaním s kontrolou zarovnania náprav - 3 kW elektrohydraulická jednotka na ovládanie hydrauliky (okrem hydraulických navijakov) - Vyberateľná ložná podlaha (pozinkovaná), 3 diely medzi vonkajšími nosníkmi, s tvrdým drevom - Výklopné rozširovacie dosky cca 230 mm na každú stranu - Voľne položené rozširovacie dosky, s oceľovým rámom - 4 výstražné tabule cca 423 x 423 mm - Rádiové diaľkové ovládanie pre riadenie zadnej nápravy - 3,5'' kráľovský čap (königszapfen) - Protišmykový povrch na ľavom zrážaní labutej tyče - Hydraulické prípojky medzi labuťou tyčou a nízkou ložnou plochou s multispájacou namiesto skrutkových spojov - Vodiaca platňa labutej tyče pre sedlový čap, cca 800 mm široká - 1 rezervné koleso s držadlom - Parkovacie miesto na labutej tyči pre výstražné tabule pri nevyužití - 2 páry vreciek na kolíky zapustené v vonkajšom ráme podvozku pre zasúvacie kolíky cca 100 x 50 mm - Výrez lyžicovej tyče zadného podvozka vzadu uzatvorený zasúvateľnou doskou - Farba návesu: MB 7350 Novagrau

Stav: nový, pohotovostná hmotnosť: 12 900 kg, maximálna hmotnosť nákladu: 34 100 kg, celková hmotnosť: 47 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 850 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 350 mm, zavesenie: iný, veľkosť pneumatiky: 245/70 R 17,5, farba: sivý, prevádzková hmotnosť: 12 900 kg, Výbava: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading platform length, approx. 3,750 mm - Gooseneck hydraulically liftable/lowerable and removable - Technical fifth wheel load: 23,000 kg - Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4 Loading Platform: - Low bed with external beams, extendable “SUPER LOW” design, approx. 6,850 mm long - Low bed with fixed hardwood floor approx. 40 mm thick and mechanical locking Rear Chassis: - Rear chassis with closed outer frame, chequer plate covering, and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear - 2 pairs of lashing rings foldable outwards - 1 pair of lashing rings mounted flat in the trough - 2 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame Pendulum Axle and Tyres: - “PENDEL-AXLE”, all axles hydromechanically forced-steered - Burst protection valve on the axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pre-inserts for securing in raised position - Axles finished with two layers of single-colour 2K paint in "FAY-Grey-34-0260" - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres 245/70 R 17.5 - TPMS tyre pressure monitoring system according to ECE R 141 Njdpehlz R Sjfx Ah Rjwh Accessories: - Prepared for mounting bolt-on container locks for 1x 20ft or 1x 40ft container on the outer beams - 2" kingpin - Galvanised steel front wall, approx. 400 mm high - One spare wheel - At the galvanised connection rail front, yellow-red air couplings - 4 wheel chocks - Forced steering from front and rear controlled via cable remote control with push buttons, includes single-track monitoring of axles - Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings - Electro-hydraulic power pack - White reflective tape on the sides, the extension, and the rear in accordance with EU regulations - European reflective panels (red-yellow) at the rear of the trailer - Brackets at the gooseneck and rear panel left/right for warning signs, including socket - 6 pairs of threaded blocks between lashing rings under the top flange on the outer beam for mounting bolt-on RUD VLBG-4 rings - Plug-in ALU sidewalls and rear wall on the gooseneck approx. 2,440 x 400 mm - The rear galvanised plug-in stakes are removable (body length approx. 2,560 mm) - Gooseneck rear upper area closed with removable cover - 5 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading platform - Folding widening pieces, approx. 230 mm per side - 2 pairs of bolt-on RUD VLBG-4 M24 rings (LC 8,000 daN) - 1 pair of steel ramps for bridging the low bed towing hook - On the loading platform, a coated sand layer as anti-slip protection - 80 km/h speed stickers at the rear and both sides - Rear part of the driving gear’s dipper stick trough covered by a plug-in plate - Four retractable warning boards approx. 423 x 423 mm, extendable by approx. 400 mm - Radio remote control for forced steering, in addition to cable control, with indicator lights on the receiver for axle single-track monitoring - Central lubrication system with 2 BEKAMAX (Pico) pumps using standard NLGI-2 grease - Load gauge for determining axle loads - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible surfaces are metallized with ZINACOR 850 (zinc 85% - alu 15%) and hot-finished

Stav: nový, pohotovostná hmotnosť: 34 500 kg, maximálna hmotnosť nákladu: 106 700 kg, celková hmotnosť: 141 200 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 7 150 mm, šírka ložného priestoru: 2 850 mm, výška ložného priestoru: 580 mm, veľkosť pneumatiky: 285/70 R19.5, farba: sivý, prevádzková hmotnosť: 34 500 kg, Výbava: ABS, Gooseneck: - Gooseneck hydraulically liftable/lowerable and detachable - Length approx. 3,650 mm - Extensive lashing positions - For tractor units: 6 x 4 or 8 x 4 3-Axle Compact Front Undercarriage: - Hook mountings at front and rear - Undercarriage length x width approx. 3,560 mm x 2,850 mm - Extensive lashing positions Excavator Deck “BB-A”: - Telescopic excavator deck “BB-A” with drive-over deck hooks at the front and pin-lug coupling at the rear - Length x base width approx. 7,150 mm x 2,850 mm - Beam height x width approx. 430 mm x 1,350 mm - Loading height 580 mm with ground clearance of 150 mm - 5 pairs of hanging lashing rings (LC 10,600 daN) - 4 pairs of M30 threaded blocks on the inner beam for mounting screwable rings 5-Axle Rear Undercarriage: - Mechanical pin-lug coupling at the front for low bed attachment; end cross-member at the rear - Undercarriage length x width approx. 6,840 mm x 2,850 mm - Extensive lashing positions Pendulum Axle and Tyres (front and rear undercarriage): - "PENDULUM AXLE", all axles hydro-mechanically forced steered - Hose rupture valve on axle balancing cylinders with automatic RESET function - Hydraulic cylinders fitted with shut-off taps and locking plugs for securing in raised position - Final coating of axles with two layers of 2K paint, single color MB 7350 Novagrau - Technical axle load: 14,640 kg (62 km/h) - Hydraulic axle compensation - Axle tools - Tyres: 285/70 R19.5 Remote Steering (Follow-up Steering): - Remote steering from front and rear operable via cable remote control with push buttons, with axle tracking monitoring Nsdpfx Ahewhywfe Rowh - Socket for remote steering operation at the gooseneck - Cable remote control with push buttons including axle tracking monitoring Accessories included: - Yellow-red air couplings on galvanized front connection rail - Steel front wall approx. 400 mm high - 4 wheel chocks with holders - 2 spare wheels 285/70 R19.5 - 3.5" king pin - Boom with winch for spare wheel at gooseneck front - Truck hydraulic connection with flow regulator (40 l/min), including boom for suspending service lines; tractor unit tank must have at least 80 liters capacity with connectors - White reflective tape according to EU regulations on the sides and on the extension, red at the rear - Plug-in ALU side boards and tailgate on the gooseneck, approx. 400 mm high, anodized - Control levers on the gooseneck protected by a foldable cover - Separate air connection with air gun at the gooseneck - Central lubrication system BEKAMAX with standard grease NLGI-2, 1x at the gooseneck, 1x at the 3-axle undercarriage, 1x at the 5-axle undercarriage - Variomax tool kit - Multi-coupling hydraulic connections at low bed hook area - Front undercarriage with separate air connection for pneumatic tools - Threaded insert option (ø 40 mm) every approx. 500 mm on the outer web of the excavator deck for screw rings - Foldable width extensions with steel inlays, adjustable from approx. 2,850 mm to 3,250 mm - Steel inlays with approx. 12 mm thick rubber covering - Two INOX toolboxes 855 x 340 x 390 mm - Radio remote control for steering in addition to cable remote control - Sand layer coating as anti-slip protection - 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery

Stav: nový, pohotovostná hmotnosť: 12 800 kg, maximálna hmotnosť nákladu: 36 200 kg, celková hmotnosť: 49 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 850 mm, šírka ložného priestoru: 2 550 mm, výška ložného priestoru: 375 mm, veľkosť pneumatiky: 245/70 R 17.5, farba: sivý, prevádzková hmotnosť: 12 800 kg, Výbava: ABS, Gooseneck: - Gooseneck in SNT design to optimize loading platform length, length approx. 3,750 mm - Gooseneck hydraulically raisable/lowerable and detachable - Technical fifth wheel load: 25,000 kg - For tractor units: 4 x 2, 6 x 2, and 6 x 4 Loading Platform: - Low bed with external beams, designed as a telescopic vessel bridge in low-profile construction with front extension - Length 6,850 mm x width 2,540 mm - One locking position approx. every 1,000 mm on the extension Rear Chassis: - Rear chassis with closed outer frame, checker plate cover, and continuous prismatic excavator trough approx. 1,250/700 x 505 mm, open at the rear Axles, Suspension, and Tyres: - "PENDLE-AXLE", all axles hydro-mechanically forced-steered - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and locking pin for securing in lifted position - Axles finished with 2 coats of 2K acrylic paint, single color in "FAY-Grey-34-0260" - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres 245/70 R 17.5 - TPMS tire pressure monitoring system according to ECE R 14 - TPMS tire pressure sensors mounted in all wheels including spare wheels Accessories included: - Plug-in front wall made of steel, approx. 400 mm high - 3 kW electro-hydraulic unit for controlling hydraulic functions, except hydraulic winches - One spare wheel with mounting adapter Nwjdpfovy Edcox Ah Roh - Outer beams on gooseneck with mounting holes for bolted lashing rings - Detachable ALU side walls on gooseneck, approx. 400 mm high, anodized - Detachable ALU rear wall on gooseneck, approx. 400 mm high, anodized - Checker plate cover above the gooseneck - Guide plate on gooseneck for the fifth wheel plate, approx. 500 mm wide - Operating area on gooseneck illuminated with on/off switch - Hydraulic crossbeam to support the gooseneck on the tractor unit or a dolly - 2" king pin - Anti-slip stickers on the left chamfer of the gooseneck - Rear upper part of the gooseneck closed with a removable cover - 4 wheel chocks with holders - Hydraulic connections from gooseneck to low bed with multi-coupling instead of screw couplings - 1 pair of steel ramps with climbing strips and mounting bolts for bridging the mounting hooks of the low bed - Ramps can be placed over or between the hooks - Mounting provision for steel ramps at the rear between the outer beams of the gooseneck - Prepared to accommodate bolt-on container mounts for 1x20ft on the outer beams - Mechanical pin-lug coupling from low bed to chassis for exchange of loading platform or installation of extension beams - With electro-pneumatic-hydraulic couplings - Outer beams of the low bed with integrally painted anti-slip sand layer - Removable (galvanized) loading floor in 3 sections insertable between outer beams with hardwood covering - Folding wideners, approx. 230 mm per side - Hanging bar at the front of the rear chassis for loose drive-on ramps for the low bed - 2 pairs of stake pockets recessed in the outer frame of the chassis, for plug-in stakes approx. 100 x 50 mm - Hanging bar for loose ALU ramps on the rear cross member of the vehicle - Central lubrication system with 2 pumps - Radio and cable remote control - 4 warning signs, approx. 423 mm x 423 mm, extendable - Extensive lashing positions

Stav: nový, pohotovostná hmotnosť: 13 850 kg, maximálna hmotnosť nákladu: 31 150 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 2 nápravy, povolené zaťaženie nápravy (náprava 1): 12 000 kg, dovolené zaťaženie nápravy (náprava 2): 12 000 kg, dĺžka ložného priestoru: 6 800 mm, šírka ložného priestoru: 2 550 mm, výška ložného priestoru: 300 mm, veľkosť pneumatiky: 245/70 R 17,5, farba: čierny, Výbava: ABS, Gooseneck: - Hydraulically detachable gooseneck with external main frame featuring integrated steering pick-up and individually operable push-down cylinders - Integrated hydraulic cylinders and support arms for coupling and uncoupling the low-bed - Hydraulic line connections to the low-bed are mounted internally on the main frame in the cranked area - Bracket for locking pins Low-bed, extendable: - Frame pre-tension adjusted for maximum payload, reduced payload in telescopic positions - Prepared for the installation of loading platform wideners - Telescopic steps approx. every 500 mm plus container positions - 7 pairs of swiveling lashing rings, 13,400 daN lashing force - 5 pairs of stake pockets 100x50 mm in the outer frame - 3 pairs of M36 threads on the outside of the telescopic frame for screwing in lashing shackles - 1 pair of M36 threads on the inside of the telescopic frame for screwing in lashing shackles - Prepared for the installation of container locks Nwedpfxjy Dqkhe Ah Roh - Adapter without pin-plate coupling: 2 pairs of 13,400 daN lashing rings welded onto the adapter towards the low-bed; 1 pair external on the adapter; 1 pair internal on the adapter - 45 mm spruce timber floor between the flatbed frames Chassis, overrunnable: - Short-design steel welded construction with open excavator trough at the rear - Crank to low-bed 90° with 2 pairs of holes at the front and rear of the chassis platform to attach approach ramps with securing pins - Different track widths possible by means of 2 different hole positions - Smooth steel plate sanded above axles, max. 5,000 kg axle load - Rear cross member with cutouts for lighting, designed as underrun protection according to ECE R58-003 - Valves and electrical distribution protected in intermediate floor Axles, suspension and tires: - Doll tera pendle axle technology with hydraulically suspended GIGANT pendle axles - All axles 12t, with ABS, AGS (automatic slack adjuster) - All axles hydraulically force-steered with up to 60° steering angle at last axle - Use of low-maintenance bearings in the steering system - All lubrication points connected to the central lubrication system - Lifting axle / jacking function, each axle supplied with a locking pin for lifting - DOLL tera pendle axle with hydraulic suspension and damping elements - Raising and lowering device with 600 mm total stroke (-70/+530) - Hydraulic dual-circuit displacement steering - Steering pick-up mounted at the fifth wheel on a turntable - Transmission of steering angles via a push-pull rod to front control cylinders - The rear slave cylinders transmit the front steering angles via solid steering rods to the steering axles - All valves centrally arranged on a control block - Axle load indicator via side-mounted gauge - Steering pressure monitoring display - Tire pressure monitoring system - Tires 245/70 R 17.5 Accessories included: - Steel front wall with spare wheel holder, bolted, height 520 mm, hot-dip galvanized - Removable side and rear walls, approx. 400 mm high, anodized - Two BEKAMAX central lubrication systems - DOLL Tronic - CAN bus system - Support arms for coupling and uncoupling the low-bed - Fifth wheel plate with integrated steering pick-up, steering wedge and 2'' king pin for semi-trailer mounting - Gooseneck cylinders for coupling and uncoupling the low-bed - 6-way hydraulic coupling with relief valve for easy disconnection of hydraulic lines - Duomatic air connection - Extensive lashing positions

Stav: použitý, konfigurácia náprav: 2 nápravy, prvá registrácia: 07/2004, farba: sivý, Rok výroby: 2004, Výbava: ABS, = Ďalšie možnosti a príslušenstvo = - Centrálne mazanie - EBS Nwedpfx Ahjxukice Rjh = Ďalšie informácie = Hrubá hmotnosť: 3.320 kg Užitočné zaťaženie: 14.680 kg CELKOVÁ HMOTNOSŤ: 18.000 kg

Stav: nový, maximálna hmotnosť nákladu: 90 700 kg, celková hmotnosť: 126 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 850 mm, Výbava: ABS, Our entire vehicle inventory with immediately and short-term available vehicles can be found on our website. Excerpt from the equipment. Full configuration available on request. Gooseneck: Gooseneck hydraulically lift/lowerable and removable. Length approx. 3,650 mm. For tractor units: 6x4 or 8x4 3-axle compact front bogie: * Hook pickups at front and rear. Length: approx. 3,560 mm * Chassis width: approx. 2,850 mm Lowbed: * ATX-A lowbed with telescopic longitudinal beams in low-profile design with fixed hardwood floor approx. 50 mm thick, * with drive-over bridge hooks at the front and pin-lug coupling at the rear * Base width: approx. 2,850 mm, length: approx. 7,150 mm, beam height: approx. 330 mm, beam width: approx. 750 mm * Loading height approx. 480 mm with ground clearance approx. 150 mm 5-axle rear bogie: * Mechanical pin-lug coupling for mounting a lowbed at the front, rear cross member at the rear * Chassis width: approx. 2,850 mm * Chassis length: approx. 6,840 mm * Pendulum axles 3-axle front bogie: * PENDULUM AXLE, all axles hydro-mechanically forced steered * Hose rupture valve on axle compensation cylinder with automatic reset function * Hydraulic cylinder with shut-off cocks and positioning pins to secure in the raised position * Final coat of axes in 2 coats of 2K paint, solid color, MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Front bogie tires: 12 x as selected by the manufacturer (M+S) 285/70 R19.5, load index 150/148J 5-axle rear bogie: * PENDULUM AXLE, all axles hydro-mechanically forced steered * Hose rupture valve on axle compensation cylinder with automatic reset function * Hydraulic cylinder with shut-off cocks and positioning pins to secure in the raised position * Final coat of axes in 2 coats of 2K paint, solid color, MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Rear bogie tires: 20 x as selected by the manufacturer (M+S) 285/70 R19.5, load index 150/148J Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure optimal corrosion protection * Final coating with 2 coats of 2K topcoat, solid color in RAL 3002 Carmine Red, according to the RAL 841GL system Includes accessories: * Steel front wall, approx. 400 mm high * Plug-in ALU side and rear walls on the gooseneck, approx. 400 mm high, anodized * 3.5" kingpin * BEKA-MAX centralized lubrication for a gooseneck * Multi-coupling hydraulic connections on the gooseneck * Front bogie with separate air connection for air-powered tools * BEKA-MAX centralized lubrication for a 3-axle bogie * Preparation for mounting screw-on container positions for 1 x 20' or 1 x 30' on the outer beams * Without container locks * Recesses on the outside of the loading platform's outer beams for fitting foldable extensions * One 7-pin socket left and right, front and rear on the rear bogie for warning boards * BEKA-MAX centralized lubrication for a 5-axle bogie * At the rear bogie, a socket for the cable remote control of the rear steering * Rear chassis with trough * 2 LED reversing lights fitted on the rear panel * European warning panels (red-yellow) at the rear * One mud flap at the rear Nodpsw Tgp Defx Ah Rowh * One LED revolving beacon with bracket left and right on the rear cross member * Two stainless steel toolboxes 855 x 340 x 390 mm on the gooseneck, left and right * 1-cycle ...

Stav: nový, maximálna hmotnosť nákladu: 48 300 kg, celková hmotnosť: 71 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Excerpt from the equipment. Complete equipment details available upon request. GOOSENECK: * Gooseneck with integrated single-axle running gear (pendulum axle) in removable design * Gooseneck hydraulically liftable and lowerable, including hydraulic connection linked with the hydraulic axle compensation of the first axles * Length: approx. 5,200 mm, with a front bevel of approx. 60° * Fifth wheel load according to data sheet: W25-DSR2700-12/22.7 * For tractor units: 6x4 or 8x4 * Front steel bulkhead, removable, approx. 400 mm high, in beveled design * 1 pair mechanical landing legs at the front of the gooseneck * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets * 1 spare wheel carrier inside on the front wall of the gooseneck with a crane arm * 2 pairs of flush-mounted lashing rings on the gooseneck (LC 2,500 daN) * 2 pairs of flush-mounted lashing rings in the front external frame of the running gear, fold-out to the outside (LC 10,000 daN) * 1 pair of lashing rings at the transition from the running gear to the loading platform (LC 10,600 daN) * On the gooseneck: 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized finish * On the gooseneck: 1 plug-in aluminum rear board, approx. 400 mm high, anodized finish Nedpoyhkqnsfx Ah Rewh * 3.5-inch kingpin * TPMS tire pressure monitoring system according to ECE R 141 * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * 1 INOX tool box with 1 lid, mounted on the gooseneck to the right in the direction of travel by the aluminum side wall, approx. 1,350 x 400 x 400 mm (L x W x H) LOADING PLATFORM: * Low bed with externally mounted beams, designed as a telescoping low-height loading platform with a front extension including a fixed approx. 50 mm thick hardwood floor * Length x width approx. 8,000 mm x 2,740 mm * Mechanical bolt and clevis coupling from low bed to running gear for swapping the loading platform or installing extension beams * Locking position approximately every 500 mm on the extension * 4 pairs of flush-mounted lashing rings set into the loading platform, distributed along the external frame (LC 10,000 daN) * 1 lashing ring each left and right on the rear cross member (LC 10,000 daN) * Fold-out extensions, approx. 230 mm per side (WITHOUT wooden planks) * Loose extension planks, steel-framed * Prepared for installation of bolt-on container locks for 1x 20' or 1x 40' container on the side beams. Without container locks * 6 pairs of threaded blocks between the lashing rings under the upper flange on the side beams for mounting M24 lashing eyes (LC 8,000 daN) * 2 pairs of M24 lashing eyes (LC 8,000 daN) included REAR RUNNING GEAR: * Rear running gear with closed external frame, checker plate covering, and continuous prism excavator recess, approx. 1,450 x 900 x 505 mm, open at the rear * Pendulum axles, all axles hydro-mechanically force-steered * Hose rupture valve on the axle equalizing cylinders with automatic reset function * Hydraulic cylinders with shut-off valves and pre-insert for securing in raised position * Axles finish-painted with 2 layers of 2K paint, plain in DB 7350 Novagrau * Technical axle load: 12,000 kg each * Hydraulic axle compensation * 245/70 R 17.5 3PMSF. Brand at our discretion * Remote steering from front and rear via cable remote control, with axle alignment control, no installation in the tractor

Stav: nový, maximálna hmotnosť nákladu: 25 300 kg, celková hmotnosť: 38 000 kg, konfigurácia náprav: 2 nápravy, celková šírka: 2 540 mm, Výbava: ABS, You can find our complete stock of vehicles, including those available immediately or at short notice, on our website. Selection of equipment. Full equipment details available upon request. Gooseneck * Gooseneck in SNT design to optimize loading platform length * Length approx. 3,750 mm, hydraulically liftable/lowerable and detachable gooseneck * Technical fifth wheel load: 25,000 kg. Suitable for tractors: 4 x 2 and 6 x 2 Beam Deck * Lowbed designed as an extendable vessel bridge in SUPER LOW design * Length approx. 6,850 mm * With mechanical locking * Supply lines are protected within the extendable beams and automatically adjust to the respective lowbed length Rear Chassis * Short version with closed outer frame and checker plate covering * Chassis includes an excavator trough, which is closed at the rear half to accommodate the air tanks Axles * BPW axles and suspension, all axles hydro-mechanically forced steered * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve Tyres * GOODYEAR KMAX T 3PMSF (M+S) 245/70 R 17.5 twin tyres. Load index 143/141J (146/146F) Braking System * Brand: WABCO, EBS-E according to EU regulations, WITHOUT connecting cable to the tractor unit Paintwork * 6-stage final treatment * Complete steel structure shot-blasted after welding * 1 coat of zinc primer * 1 coat of adhesion primer. Final paint with 2 coats of 2-pack (acrylic) paint in a single color, followed by cavity sealing with special wax Trailer Color * RAL 3002 Carmine red * Rim color: Silver grey * Side wall color: Natural aluminum Included Accessories * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit to control hydraulic operations, except for hydraulic winches. Without installation of supply connections on the tractor * Mounting adapter for 1 spare wheel in front of the gooseneck's front wall * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings. The first hole approx. 200 mm from the front, then approx. every 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring each left and right on the rear bevel of the gooseneck (LC 6,000 daN) * 2" king pin * Hydraulic crossbeam to support the gooseneck on the tractor unit or a dolly * Air connection with air gun on the gooseneck * 1 pair of steel ramps with climbing profiles and locking bolts to bridge the lowbed's hooks * 1 lashing ring each left and right on the front cross member (LC 10,000 daN) * On the outer beams of the loading platform, preparation for removable floor panels * Lashing rings with retaining spring approx. every 1,200–1,300 mm outside on the inner beams of the platform * Lashing rings with retaining spring approx. every 1,200–1,300 mm outside on the outer beams of the loading platform (LC 10,000 daN) * Cut-outs on the top flange of the outer beams above the lashing rings * Mechanical pin-tab coupling from lowbed to chassis for exchangeable loading platform or installation of extension beams. Includes electro-pneumatic-hydraulic couplings * Outer beams of the lowbed coated with non-slip sand layer Nwsdpfx Aev Sw E Ash Reh * 2nd driving height for upper drive position, max. ±50 mm from normal driving position, without controls installed on the tractor * 1 pair of lashing rings with retaining spring at the transition from the lowbed to the excavator trough (LC 10,000 daN) * Bevel front and rear a

Stav: nový, maximálna hmotnosť nákladu: 25 645 kg, celková hmotnosť: 38 000 kg, konfigurácia náprav: 2 nápravy, celková šírka: 2 540 mm, Výbava: ABS, Náš kompletný sklad vozidiel s okamžite a krátkodobo dostupnými vozidlami nájdete na našej webstránke. Výpis z výbavy. Kompletná výbava na vyžiadanie. Ložná plocha: Nízkozdvižná plošina so stredovým nosníkom, výsuvné prevedenie, dĺžka cca 6 750 mm * 5 párov sklopných úchytných krúžkov von (LC 5 000 daN) * 1 pár sklopných úchytných krúžkov von (LC 10 000 daN) * 1 pár ležatých úchytných krúžkov vzadu na ložnej ploche (LC 10 000 daN) Labutí krk: * Hydraulicky zdvíhateľný / spustiteľný a odpojiteľný labutí krk Podvozok vzadu: * Zadný podvozok, krátka verzia s uzavretým vonkajším rámom a krytom z ryhovaného plechu * Podvozok s výrezom pre rýpadlo, ktorý je vzadu uzavretý na uloženie vzduchových nádrží * 2 páry sklopných úchytných krúžkov von (LC 5 000 daN) * 1 pár sklopných úchytných krúžkov von (LC 10 000 daN) * 1 pár ležatých úchytných krúžkov vzadu na podvozku (LC 10 000 daN) Nápravy: Nsdpfx Ajxf Sileh Rjwh * BPW nápravy, hydro-mechanicky nútene riadené * Vzduchové pruženie s ventilom na zdvíhanie a spúšťanie Pneumatiky: * Pneumatiky 245/70 R 17.5 3PMSF * TPMS: systém kontroly tlaku v pneumatikách podľa ECE R 141 Brzdová sústava: * Brzdová sústava Wabco podľa predpisov EÚ s EBS-E (2S2M) Lakovanie: Kvalitný 2-komponentový (2K) vrchný náter v jednofarebnom prevedení RAL 3000 ohnivo červená Vrátane nasledujúcej doplnkovej výbavy: * 2 kráľovské čapy * Pozinkovaná čelná stena, cca 400 mm vysoká * Doťahovanie zpredu a zozadu pomocou káblového diaľkového ovládania cez tlačidlá, s kontrolou vedenia náprav (bez inštalácie v ťažnom vozidle) * Elektrohydraulická jednotka * Manometer zaťaženia pre určenie zaťaženia nápravy vrátane diagramu zaťaženia * Na labutiom krku hliníkové bočné steny a zadná stena, nasúvacie, cca 2 440 x 400 mm (d x v). Zadné pozinkované zasúvacie stĺpiky sú odnímateľné. (Dĺžka nadstavby cca 2 560 mm) * Na labutiom krku samostatný vzduchový prípoj so vzduchovou pištoľou * 2 pracovné svetlá s prepínačom na náves, umiestnené na plošine labutieho krku vľavo a vpravo * INOX náradový box cca 1 350 x 400 x 400 mm na labutiom krku * 6 párov vreciek na stĺpiky pre zasúvacie stĺpiky cca 100 x 50 mm vo vonkajšom ráme ložnej plochy, 2 páry vo vonkajšom ráme podvozku * Pozinkované rozšírenia, vysúvateľné o cca 230 mm na každú stranu * Hydraulické prípojky z labutieho krku do nízkozdvižnej plošiny s multikonektorom namiesto skrutkových spojok. Bez záruky tesnosti * Centrálne maznanie s 2 čerpadlami BEKAMAX (Pico) s bežným tukom NLGI-2 a odnímateľnou ochranou okolo čerpadla * 2 páry vreciek WADER na kontejnery v ložnej ploche, na 1x20' kontajner * Odnímateľný pozinkovaný medzistôl s 1 párom WADER vreciek na kontejnery * 1 pár oceľových rámp na premostenie závesných hákov nízkozdvižnej plošiny * Na ložnej ploche je nanesená piesková vrstva proti pošmyknutiu * HRM metalizácia (High Resistance Metallisation)

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, pohotovostná hmotnosť: 12 500 kg, maximálna hmotnosť nákladu: 29 500 kg, celková hmotnosť: 38 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 11 200 mm, šírka ložného priestoru: 2 550 mm, zavesenie: vzduch, farba: červená, Rok výroby: 2022, Nízka gondolová náves Kässbohrer LB2 TIEF-BETT / 16,5 m / Výsuvný náves / riadené nápravy / 2 kusy Rok výroby: 2022 Technické údaje Celková hmotnosť: 42 000 kg Registrovaná najväčšia prípustná hmotnosť: 38 000 kg Hmotnosť: 12 500 kg Nosnosť: 29 500 kg 2 riadené nápravy nápravy BWP Vzduchové odpruženie Kotúčové brzdy Diaľkové ovládanie Odnímateľný predný čelník Dĺžka hlavnej ložnej plochy: 660 cm Dĺžka výsuvnej plošiny: 460 cm Njdpfx Ahjzf Eq Ae Rowh Celková dĺžka hlavnej ložnej plochy: 1120 cm Dĺžka zadnej plošiny: 270 cm Svetlá výška na jazdu: 40 cm Šírka s rozšíreniami: 255 cm Šírka jadra: 130 cm Rozšírenie o 25 cm na každú stranu Špeciálne povolenia: Šírka vozidla: 3,20 m Vzdialenosť medzi osou pätky spojovacieho čapu a zadnou časťou návesu: 16,525 m Maximálna prípustná výška: 38 000 kg Povolený tlak na skupinu náprav: 20 000 kg (1. náprava – 10 000 kg; 2. náprava – 10 000 kg) Náves je vo výbornom technickom a vizuálnom stave. Kompletná dokumentácia. K dispozícii 2 identické návesy.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, najazdené kilometre: 350 000 km, výkon: 375,1 kW (509,99 k), typ paliva: nafta, stav pneumatík: 100 percento, konfigurácia náprav: 6x2, farba: biely, kabína vodiča: spacia kabína, typ prevodu: automatický, emisná trieda: Euro 6, zavesenie: oceľ-vzduch, Rok výroby: 2022, Výbava: AdBlue, klimatizácia, tempomat, MAN TGX 28.510 6×2 / Lôžková kabína / Znížený gondolový náves Kässbohrer LB2 TIEF-BETT / 16,5 m / riadené nápravy / Celková povolená hmotnosť 65 t MAN TGX 28.510 6×2 / Lôžková kabína / NOVÉ pneumatiky / Celková povolená hmotnosť 65 t Rok výroby: 2022 Najazdené km: 350 000 km Technické špecifikácie: Celková hmotnosť: 26 000 kg Celková hmotnosť s prívesom: 65 000 kg Prevádzková hmotnosť: 8 774 kg Užitočné zaťaženie: 17 226 kg Výkon: 510 k Objem motora: 12 419 cm³ 6×2 JOST točnica nové pneumatiky zdvíhateľná 3. náprava prídavná palivová nádrž zadné vzduchové odpruženie Lôžková kabína s 2 lôžkami Klimatizácia Webasto Automatická prevodovka Strešné okno Uzávierka nápravy Rádio Tachograf Vozidlo kúpené a preverené v oficiálnom poľskom zastúpení MAN. 100 % nehavarované, úplná dokumentácia, 1. majiteľ. Nwodpjzf Ekvefx Ah Roh Výborný technický a vizuálny stav. Znížený gondolový náves Kässbohrer LB2 TIEF-BETT / 16,5 m / Rozťahovací náves / riadené nápravy / 2 kusy Rok výroby: 2022 Technické údaje: Celková prípustná hmotnosť: 42 000 kg Registrovaná prípustná hmotnosť: 38 000 kg Prevádzková hmotnosť: 12 500 kg Nosnosť: 29 500 kg 2 riadené nápravy BWP nápravy Vzduchové odpruženie Kotúčové brzdy DIALKOVÉ OVLÁDANIE Odnímateľný predok Dĺžka hlavnej plošiny: 660 cm Dĺžka výsuvnej plošiny: 460 cm Celková dĺžka hlavnej plošiny: 1 120 cm Dĺžka zadnej plošiny: 270 cm Jazdná výška: 40 cm Šírka s rozšíreniami: 255 cm Základná šírka: 130 cm Rozšírená o 25 cm na každú stranu Špeciálne povolenia: Šírka vozidla: 3,20 m Vzdialenosť medzi otočným čapom a zadnou časťou návesu: 16,525 m Celková prípustná hmotnosť: 38 000 kg Povolené zaťaženie skupiny náprav: 20 000 kg (1. náprava – 10 000 kg; 2. náprava – 10 000 kg) Náves je vo vynikajúcom technickom a vizuálnom stave. Kompletná dokumentácia. K dispozícii sú 2 identické návesy.

Stav: použitý, pohotovostná hmotnosť: 14 200 kg, maximálna hmotnosť nákladu: 33 800 kg, celková hmotnosť: 48 000 kg, prvá registrácia: 05/2019, dĺžka ložného priestoru: 9 600 mm, šírka ložného priestoru: 2 550 mm, výška ložného priestoru: 450 mm, celková výška: 135 600 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: žltá, najazdené kilometre: 1 001 km, typ prevodu: iný, kabína vodiča: iný, Výbava: ABS, Umiestnenie vozidla: na ceste / v tranzite, 3 nápravy, nápravy BPW, vzduchové odpruženie, 2. a 3. náprava nútene riadené, ABS (protiblokovací systém), kotviace oká, dvojdielne najazdové rampy, hydraulické rampy, zadné podpery Nadstavba: Doll 3-nápravový nízkoložný náves s kolískami na kolesá (výška 450 mm), 2. + 3. náprava hydraulicky riadené, rádiové ovládanie. Na 1. nápravu je namontované odľahčenie nápravy, cúvacia kamera, dĺžka nízkeho ložiska 5 500 mm, nakladacia výška 850 mm, výška nízkeho ložiska 600 mm, kolíska na kolesá 450 mm, žiarové zinkovanie, hydraulické bočné posúvanie rámp (dĺžka 4 800 mm), rádiové diaľkové ovládanie (riadiaca funkcia), kolísky na kolesá pre rázvory 3 300 – 3 800 mm, bagrová/motokranová priehlbina cca 3 500 mm dlhá s 3 páry sklopných upínacích očiek po 10 000 daN, 2 páry kotviacich očiek 5 000 daN uložené v vonkajšom ráme zadnej platformy podvozku. 6 párov sklopných upínacích očiek 10 000 daN inštalovaných vo vonkajšom ráme nízkych podvalov (2 páry vo vonkajšom ráme platformy podvozku a 4 páry vo vonkajšom ráme poklesnutej ložnej plochy nízkeho podvalu). 1 pár sklopných upínacích očiek 13 400 daN nainštalovaný vedľa stredového rámu vľavo/vpravo pred prvou nápravou (pred poklesnutou ložnou plochou). 1 pár sklopných upínacích očiek 10 000 daN vo prednej pevnej podpere, zvarené v otvorenom vonkajšom ráme. 1 pár sklopných upínacích očiek 13 400 daN zvarené v ohybe hlavného rámu k nízkemu podvalu. Rozšíriteľný o 3 m, výbava z výroby. Údaje bez záruky, keďže je v tranzite! ÚDAJE O DOPLNKOVEJ VÝBAVE SÚ BEZ ZÁRUKY, zmeny, predaj počas uverejnenia a chyby vyhradené! Nsdpfx Ahjzhalyj Rswh