Eggers Hpt 18Zl / Tiefbett !!!! kúpiť použité (118)

Stav: použitý, maximálna hmotnosť nákladu: 47 540 kg, celková hmotnosť: 65 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 10/2015, Výbava: ABS, Identifikačné číslo vozidla: WLASTA465FWF65412 ODNÍMATEĽNÝ LABUTÍ KRK Vlastná hmotnosť: 17 460 kg Královský čap: 3,5" ---- Labutí krk: 4 100 mm - odnímateľný Sedadlová výška: 1 300 - 1 400 mm - 3,5 palca Dĺžka spustenej ložnej plochy: 8 050 mm - nakladacia výška: 450 - 530 mm Nakladacia šírka v spustenom lôžku a na ráme podvozka: 2 750 mm Rozšíriteľná o 225 mm na každú stranu až na 3 200 mm Rám podvozka: 5 700 mm - nakladacia výška: 920 - 1 020 mm Výrez pre rýpadlo - výrez pre rukoväť lyžice Technická sedlová záťaž do 25 000 kg Zaťaženie náprav: 4 x 10 000 kg BPW Eco nápravy s bubnovými brzdami 4x hydraulicky nútene riadené nápravy s diaľkovým ovládaním Wabco Smart Control Centrálne mazanie Rjdpfx Ajuw Apzodvet Pneumatiky: 235/75 R 17,5 Zmeny, predaj medzičasom a chyby sú výslovne vyhradené. Tento opis slúži na všeobecnú identifikáciu vozidla a nepredstavuje záruku v zmysle kúpnej zmluvy. Rozhodujúci je opis podľa kúpnej zmluvy. Naša ponuka je všeobecne bez novej technickej kontroly (TÜV). V prípade záujmu o novú technickú kontrolu (TÜV) Vám radi zašleme ponuku našich partnerských dielní! Vozidlo môže byť polepené alebo popísané reklamou. Platné sú naše všeobecné dodacie a platobné podmienky.

Stav: použitý, celková hmotnosť: 65 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 07/2016, Výbava: ABS, Vehicle identification number: WLASTA465GWF66007 DETACHABLE - TELESCOPIC GOOSENECK German MOT valid until 08/2026 - Safety Inspection until 02/2026 Unladen weight: 19,220 kg Kingpin: 3.5" ---Detachable gooseneck Fifth wheel height: 1,300 - 1,400 mm - 3.5 inch Overall length: 17,750 - 21,350 mm Lowbed length: 8,550 mm (including sliding table) - Loading height: 450 - 530 mm TELESCOPIC EXTENSION by 3,600 mm Loading width in lowbed and chassis frame: 2,750 mm Extendable by 225 mm per side to 3,200 mm Chassis frame: 5,700 mm - Loading height: 920 - 1,020 mm Excavator trough - Bucket recess Technical fifth wheel load up to 25,000 kg Axle loads 4 x 10,000 kg BPW Eco axles with drum brakes Rodpfx Adjyb U Tmevot 4 hydraulically forced-steered axles with RADIO REMOTE CONTROL Wabco Smart Control Central lubrication system Tyres: 235/75 R 17.5 Modifications, prior sale and errors excepted. This description serves only as general identification of the vehicle and does not constitute a warranty in the legal sense of sales law. The binding description is that specified in the sales contract. Our offer is generally without new TÜV approval. Should new TÜV approval be required, we would be pleased to provide an offer from our partner workshops. Vehicle may be covered/applied with advertising and/or lettering. Our general terms of delivery and payment apply.

Stav: použitý, pohotovostná hmotnosť: 18 240 kg, maximálna hmotnosť nákladu: 45 760 kg, celková hmotnosť: 64 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 02/2012, ďalšia kontrola (TÜV): 01/2024, dĺžka ložného priestoru: 12 120 mm, šírka ložného priestoru: 2 740 mm, výška ložného priestoru: 550 mm, veľkosť pneumatiky: 285/70R19.5, farba: červená, najazdené kilometre: 1 001 km, typ prevodu: iný, kabína vodiča: iný, Výbava: ABS, Location of vehicle: Bovenden, 4-axle, SAF axles, forced steering, lift and lower function, ABS (anti-lock braking system), lashing rings. Body: Low-bed semi-trailer with 3 hydraulically steered axles & jeep dolly. Including jeep dolly with 10t SAF axle & 295/80R22.5 tires! Three 12t SAF axles at the rear! Can be widened to 3.2 m, 8 m in the low-bed section! Rsdpfsyf E E Ujx Advjt Includes radio and cable remote control, automatic tracking. A construction description is available and can be sent upon request! ACCESSORY INFORMATION PROVIDED WITHOUT GUARANTEE. Subject to change, prior sale, and errors.

Stav: nový, pohotovostná hmotnosť: 29 600 kg, maximálna hmotnosť nákladu: 72 400 kg, celková hmotnosť: 102 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 6 650 mm, šírka ložného priestoru: 2 840 mm, výška ložného priestoru: 550 mm, veľkosť pneumatiky: 285/70 R19.5, farba: sivý, prevádzková hmotnosť: 29 600 kg, Výbava: ABS, Gooseneck: - Hydraulically liftable/lowerable and detachable gooseneck - Length approx. 3,650 mm - For tractor units: 6 x 4 or 8 x 4 2-Axle Front Bogie: - Hook couplings front and rear - Chassis length x width approx. 2,200 mm x 2,850 mm Excavator Deck “BB-A”: - Telescopic excavator deck “BB-A” with drive-over deck hooks at the front and pin & lug coupling at the rear - Length x base width approx. 6,650 mm x 2,850 mm - Beam height x beam width approx. 400 mm x 1,350 mm - Loading height 550 mm with 150 mm ground clearance Rsdpfswcmhaox Advjt 4-Axle Rear Bogie: - Mechanical pin & lug coupling at the front for attaching a lowbed, end cross-member at the rear - Chassis length x width approx. 5,480 mm x 2,850 mm - Extensive lashing positions Pendulum Axle and Tyres (front and rear chassis): - “PENDULUM AXLE”, all axles hydro-mechanically forced steered - Burst protection valve on axle compensation cylinder with automatic reset function - Hydraulic cylinders with shut-off valves and locking pins to secure in lifted position - Final axle coating with 2 coats of 2K paint, single colour in MB 7350 Novagrau - Technical axle load: 12,000 kg - Hydraulic axle balancing - Tyres: 285/70 R19.5 Follow Steering: - Remote steering from front and rear via cable remote control with push buttons, including single-track steering monitoring - Socket on gooseneck for steering control - Cable remote with push buttons and single-track control included Accessories included: - Galvanised connection bar at the front with yellow/red air couplings - Steel front wall approx. 400 mm high - 4 wheel chocks - 3.5" king pin - One 7-pin socket left and right at the rear of the gooseneck for warning panel - A-frame with winch for spare wheel at front end of gooseneck - Truck hydraulic connection with flow regulator (40 l/min), including bracket for supply line suspension; tractor fuel tank must be at least 80 litres, incl. couplers - Detachable ALU side walls and rear board on gooseneck, approx. 400 mm high, anodised - Control lever on gooseneck protected by a foldable cover - Separate air connection with blow gun on gooseneck - BEKAMAX central lubrication system, 1x on gooseneck, 1x on 2-axle bogie, 1x on 4-axle bogie - Variomax tool kit - Multi-coupler hydraulic connections on gooseneck and at lowbed hook bracket - 2 spare wheels - One 7-pin socket left and right, front and rear on rear chassis for warning panel - Front chassis with separate air connection for pneumatic screwdriver - Folding widening extenders with steel panels, width adjustable from approx. 2,850 mm to 3,250 mm - Steel panels can be positioned in two places to create a lowered loading platform - Steel panels with approx. 12 mm rubber floor covering - Threaded bushings (⌀ 40 mm) spaced approx. every 500 mm on the outer flange of the excavator deck for lashing rings - One locking position approx. every 500 mm on the extension with mechanical locking - Socket on rear chassis for cable remote control steering - 2 reversing lights on rear panel - Four warning panels, extendable by approx. 2,000 mm each, approx. 423 x 423 mm, with position light - 1 work lamp left + right on rear panel of gooseneck, separately switchable - Two INOX toolboxes, approx. 855 x 340 x 390 mm - 1-cylinder Hatz diesel engine (Silent Pack) - Radio remote control for follow steering

Stav: nový, pohotovostná hmotnosť: 34 500 kg, maximálna hmotnosť nákladu: 106 700 kg, celková hmotnosť: 141 200 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 7 150 mm, šírka ložného priestoru: 2 850 mm, výška ložného priestoru: 580 mm, veľkosť pneumatiky: 285/70 R19.5, farba: sivý, prevádzková hmotnosť: 34 500 kg, Výbava: ABS, Gooseneck: - Gooseneck hydraulically liftable/lowerable and detachable - Length approx. 3,650 mm - Extensive lashing positions - For tractor units: 6 x 4 or 8 x 4 Redpfjwhywfjx Advet 3-Axle Compact Front Undercarriage: - Hook mountings at front and rear - Undercarriage length x width approx. 3,560 mm x 2,850 mm - Extensive lashing positions Excavator Deck “BB-A”: - Telescopic excavator deck “BB-A” with drive-over deck hooks at the front and pin-lug coupling at the rear - Length x base width approx. 7,150 mm x 2,850 mm - Beam height x width approx. 430 mm x 1,350 mm - Loading height 580 mm with ground clearance of 150 mm - 5 pairs of hanging lashing rings (LC 10,600 daN) - 4 pairs of M30 threaded blocks on the inner beam for mounting screwable rings 5-Axle Rear Undercarriage: - Mechanical pin-lug coupling at the front for low bed attachment; end cross-member at the rear - Undercarriage length x width approx. 6,840 mm x 2,850 mm - Extensive lashing positions Pendulum Axle and Tyres (front and rear undercarriage): - "PENDULUM AXLE", all axles hydro-mechanically forced steered - Hose rupture valve on axle balancing cylinders with automatic RESET function - Hydraulic cylinders fitted with shut-off taps and locking plugs for securing in raised position - Final coating of axles with two layers of 2K paint, single color MB 7350 Novagrau - Technical axle load: 14,640 kg (62 km/h) - Hydraulic axle compensation - Axle tools - Tyres: 285/70 R19.5 Remote Steering (Follow-up Steering): - Remote steering from front and rear operable via cable remote control with push buttons, with axle tracking monitoring - Socket for remote steering operation at the gooseneck - Cable remote control with push buttons including axle tracking monitoring Accessories included: - Yellow-red air couplings on galvanized front connection rail - Steel front wall approx. 400 mm high - 4 wheel chocks with holders - 2 spare wheels 285/70 R19.5 - 3.5" king pin - Boom with winch for spare wheel at gooseneck front - Truck hydraulic connection with flow regulator (40 l/min), including boom for suspending service lines; tractor unit tank must have at least 80 liters capacity with connectors - White reflective tape according to EU regulations on the sides and on the extension, red at the rear - Plug-in ALU side boards and tailgate on the gooseneck, approx. 400 mm high, anodized - Control levers on the gooseneck protected by a foldable cover - Separate air connection with air gun at the gooseneck - Central lubrication system BEKAMAX with standard grease NLGI-2, 1x at the gooseneck, 1x at the 3-axle undercarriage, 1x at the 5-axle undercarriage - Variomax tool kit - Multi-coupling hydraulic connections at low bed hook area - Front undercarriage with separate air connection for pneumatic tools - Threaded insert option (ø 40 mm) every approx. 500 mm on the outer web of the excavator deck for screw rings - Foldable width extensions with steel inlays, adjustable from approx. 2,850 mm to 3,250 mm - Steel inlays with approx. 12 mm thick rubber covering - Two INOX toolboxes 855 x 340 x 390 mm - Radio remote control for steering in addition to cable remote control - Sand layer coating as anti-slip protection - 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery

Stav: nový, pohotovostná hmotnosť: 12 900 kg, maximálna hmotnosť nákladu: 34 100 kg, celková hmotnosť: 47 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 850 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 350 mm, zavesenie: iný, veľkosť pneumatiky: 245/70 R 17,5, farba: sivý, prevádzková hmotnosť: 12 900 kg, Výbava: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading platform length, approx. 3,750 mm - Gooseneck hydraulically liftable/lowerable and removable - Technical fifth wheel load: 23,000 kg - Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4 Loading Platform: - Low bed with external beams, extendable “SUPER LOW” design, approx. 6,850 mm long - Low bed with fixed hardwood floor approx. 40 mm thick and mechanical locking Rear Chassis: - Rear chassis with closed outer frame, chequer plate covering, and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear - 2 pairs of lashing rings foldable outwards - 1 pair of lashing rings mounted flat in the trough - 2 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame Pendulum Axle and Tyres: - “PENDEL-AXLE”, all axles hydromechanically forced-steered - Burst protection valve on the axle compensation cylinder with automatic RESET function Rjdpfxshlz R Se Advst - Hydraulic cylinders with shut-off valves and pre-inserts for securing in raised position - Axles finished with two layers of single-colour 2K paint in "FAY-Grey-34-0260" - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres 245/70 R 17.5 - TPMS tyre pressure monitoring system according to ECE R 141 Accessories: - Prepared for mounting bolt-on container locks for 1x 20ft or 1x 40ft container on the outer beams - 2" kingpin - Galvanised steel front wall, approx. 400 mm high - One spare wheel - At the galvanised connection rail front, yellow-red air couplings - 4 wheel chocks - Forced steering from front and rear controlled via cable remote control with push buttons, includes single-track monitoring of axles - Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings - Electro-hydraulic power pack - White reflective tape on the sides, the extension, and the rear in accordance with EU regulations - European reflective panels (red-yellow) at the rear of the trailer - Brackets at the gooseneck and rear panel left/right for warning signs, including socket - 6 pairs of threaded blocks between lashing rings under the top flange on the outer beam for mounting bolt-on RUD VLBG-4 rings - Plug-in ALU sidewalls and rear wall on the gooseneck approx. 2,440 x 400 mm - The rear galvanised plug-in stakes are removable (body length approx. 2,560 mm) - Gooseneck rear upper area closed with removable cover - 5 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading platform - Folding widening pieces, approx. 230 mm per side - 2 pairs of bolt-on RUD VLBG-4 M24 rings (LC 8,000 daN) - 1 pair of steel ramps for bridging the low bed towing hook - On the loading platform, a coated sand layer as anti-slip protection - 80 km/h speed stickers at the rear and both sides - Rear part of the driving gear’s dipper stick trough covered by a plug-in plate - Four retractable warning boards approx. 423 x 423 mm, extendable by approx. 400 mm - Radio remote control for forced steering, in addition to cable control, with indicator lights on the receiver for axle single-track monitoring - Central lubrication system with 2 BEKAMAX (Pico) pumps using standard NLGI-2 grease - Load gauge for determining axle loads - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible surfaces are metallized with ZINACOR 850 (zinc 85% - alu 15%) and hot-finished

Stav: nový, pohotovostná hmotnosť: 17 250 kg, maximálna hmotnosť nákladu: 48 700 kg, celková hmotnosť: 66 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 7 550 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 375 mm, veľkosť pneumatiky: 245/70 R 17.5, farba: sivý, prevádzková hmotnosť: 17 250 kg, Výbava: ABS, Labutia tyč (Schwanenhals): - Labutia tyč v SNT dizajne na optimalizáciu dĺžky ložnej plochy, dĺžka cca 3 750 mm - Hydraulicky zdvíhateľná/spúšťateľná a zjazdná labutia tyč - Pre ťahače: 6 x 4 a 8 x 4 (alebo 6 x 4 s voliteľným jednoosovým dolly) Nízka ložná plocha (Tiefbett): - Nízka ložná plocha s vonkajšími nosníkmi, vyhotovená ako teleskopický most na kotly v nízkom prevedení s výsuvom vpredu - Rozmery: dĺžka x šírka cca 7 550 mm x 2 740 mm - Mechanické uzamykanie výsuvu Podvozok: - Zadný podvozok s uzavretým vonkajším rámom - Rebrovaný plechový povrch a priebežná prizmatická výrezová „baggermulda“ cca 1 450/900 x 505 mm, vzadu otvorená Nápravy, pruženie a pneumatiky: - „PENDEL-AXLE“ – všetky nápravy sú hydromechanicky riadené - Ventil proti prasknutiu hadíc na vyrovnávacích valcoch náprav s automatickou funkciou RESET - Hydraulické valce s uzatváracími kohútikmi a predpínačmi na zaistenie vo zdvihnutej polohe - Záverečný lak náprav: 2 vrstvy dvojzložkového laku v jednotnej farbe „FAY-Grau-34-0260“ - Technická nosnosť nápravy: 12 000 kg - Hydraulické vyrovnávanie záťaže na nápravy - Pneumatiky: 245/70 R 17.5 Príslušenstvo: - Predná stena z ocele, zasúvateľná, výška cca 400 mm - 4 ks kliny pod kolesá - Zadná horná časť labutej tyče zakrytá odnímateľným krytom - 1 pár oceľových nájazdových rámp so slikrami a upevňovacími kolíkmi pre mostíky na uchytenie do nízkej ložnej plochy - Rampy je možné položiť nad alebo medzi háky - Možnosti upevnenia oceľových nájazdových rámp vzadu medzi vonkajšími nosníkmi labutej tyče - Zaisťovacie miesta každých cca 1 000 mm na výsuve - 1 upevňovací krúžok vľavo a vpravo na prednom priečniku - Pripojovací panel pre napájacie vedenia k ťahaču, umiestnený na úrovni vonkajšieho rámového profilu - 6 párov závitových blokov na vonkajšej strane vnútorných nosníkov ložnej plochy pre montáž skrutkovacích krúžkov M24 - 6 párov zapustených upevňovacích krúžkov na vonkajšej strane vonkajších nosníkov ložnej plochy, sklopné dovnútra aj von - 1 pár závitových blokov vpredu a vzadu na vonkajších nosníkoch ložnej plochy pre montáž skrutkovacích krúžkov M24 - Závesná lišta pre voľné hliníkové nájazdové rampy na zadnom priečniku vozidla - Centrálne mazanie s dvoma čerpadlami značky BEKAMAX - Riadenie zadnej nápravy vpredu aj vzadu, ovládateľné káblovým diaľkovým ovládaním s kontrolou zarovnania náprav - 3 kW elektrohydraulická jednotka na ovládanie hydrauliky (okrem hydraulických navijakov) - Vyberateľná ložná podlaha (pozinkovaná), 3 diely medzi vonkajšími nosníkmi, s tvrdým drevom - Výklopné rozširovacie dosky cca 230 mm na každú stranu - Voľne položené rozširovacie dosky, s oceľovým rámom - 4 výstražné tabule cca 423 x 423 mm Rodoh Hm Tzepfx Advst - Rádiové diaľkové ovládanie pre riadenie zadnej nápravy - 3,5'' kráľovský čap (königszapfen) - Protišmykový povrch na ľavom zrážaní labutej tyče - Hydraulické prípojky medzi labuťou tyčou a nízkou ložnou plochou s multispájacou namiesto skrutkových spojov - Vodiaca platňa labutej tyče pre sedlový čap, cca 800 mm široká - 1 rezervné koleso s držadlom - Parkovacie miesto na labutej tyči pre výstražné tabule pri nevyužití - 2 páry vreciek na kolíky zapustené v vonkajšom ráme podvozku pre zasúvacie kolíky cca 100 x 50 mm - Výrez lyžicovej tyče zadného podvozka vzadu uzatvorený zasúvateľnou doskou - Farba návesu: MB 7350 Novagrau

Stav: nový, pohotovostná hmotnosť: 17 500 kg, maximálna hmotnosť nákladu: 43 500 kg, celková hmotnosť: 61 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 7 550 mm, šírka ložného priestoru: 2 750 mm, výška ložného priestoru: 400 mm, veľkosť pneumatiky: 245/70 R 17.5, farba: sivý, Výbava: ABS, Neck (Gooseneck): - Gooseneck in SNT design for optimizing loading platform length, approx. 3,750 mm long - Gooseneck hydraulically liftable/lowerable and detachable - For tractor units: 6x4 or 8x4 Deck (Lowbed): - Lowbed with external beams, extendable design, "SUPER LOW" type, approx. 7,550 mm long - Lowbed with fixed hardwood floor, approx. 40 mm thick, with mechanical locking - Service lines protected and routed within the extendable beams, automatically adjusting to the respective lowbed length Rear chassis: - Rear chassis with closed outer frame, checker plate surface, and continuous prism excavator trough, approx. 1,450/900 x 505 mm, open at the rear - 2 pairs of stake pockets (100 x 50 mm) on the outer frame for plug-in stakes Axles and tires: - "PENDULUM AXLE", all axles forced-steered hydromechanically - Burst pipe valve to axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and plug pin for securing in raised position - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tires 245/70 R 17.5 / 3PMSF Accessories included: - Prepared for mounted container locks for 1x 20ft or 1x 40ft container on outer beams - 2" king pin - One galvanized steel front wall, approx. 400 mm high - One spare wheel with holder - Yellow-red air couplings on the galvanized front connector strip - 4 wheel chocks - Remote steering front and rear operated by wire remote control via pushbuttons, with single-track axle alignment control - Hydraulic couplings between gooseneck and lowbed as multi-coupling instead of screw type - Electro-hydraulic power pack - White reflective tape as per EU regulations on the sides, at the extension and red on the rear - 2 wooden blocks 500x250x200 mm - European reflective warning panels (red-yellow) at trailer rear - On gooseneck and rear section: holders for warning signs with sockets left and right - Central lubrication system with 2 BEKAMAX (Pico) pumps, standard grease NLGI-2 - Load gauge to determine axle loads, incl. load chart - On gooseneck, plug-in aluminum side walls and rear wall approx. 2,000 x 400 mm - Rear galvanized plug-in stakes removable (body length approx. 2,120 mm) - Separate air connection with air gun on the gooseneck - Duomatic air coupling from gooseneck to lowbed - Gooseneck closed at rear upper section with removable cover Rsdpfxsh Hm Thj Advet - 1 pair of steel ramps for bridging the lowbed receptacle hooks - Four approx. 400 mm extendable warning signs, approx. 423 x 423 mm - Radio remote control for rear steering in addition to cable remote, with receiver indicator lights for single-track alignment - 6 pairs threaded blocks between lashing rings under top chord on outer beam for installation of screwable RUD rings VLBG-4 - 7 pairs of stake pockets (100 x 50 mm) in outer frame of load platform - Folding extensions, approx. 230 mm per side - Anti-slip sand coating painted on load platform - Dipper stick trough at front and rear of rear chassis closed with plug-in plates - HRM Metallization (High Resistance Metallization) of the outer frame - Complete steel construction shot-blasted, then defined visible surfaces metallized with ZINACOR 850 (Zinc 85% - Alu 15%) by hot finishing

Stav: použitý, pohotovostná hmotnosť: 22 900 kg, maximálna hmotnosť nákladu: 41 100 kg, celková hmotnosť: 64 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 10/2009, zavesenie: vzduch, veľkosť pneumatiky: 235/75 17,5, stav pneumatík: 70 percento, farba: zelený, Rok výroby: 2009, veľkosť prednej pneumatiky: 235/75 17,5, veľkosť zadnej pneumatiky: 235/75 17,5, kabína vodiča: denná kabína, emisná trieda: žiadny, Výbava: ABS, registrácia nákladného vozidla, Referenčné číslo pre dopyty: 40194 Goldhofer, STZ-VL4-42/80A * Rok výroby: 2009 * ABS, protiblokovací brzdový systém * Vzduchové odpruženie * Riadená náprava * Vzduchová spojka (červená + žltá) * Držiak rezervného kolesa s rezervou * Pripojovací konektor 2x7 pólový * Zdvihacie a spúšťacie zariadenie * Rozšíriteľný * Teleskopický náves * Ťažné oká pre nadmerné zaťaženie * Odpruženie: vzduchové Rjdeyict Uepfx Advet * Celková hmotnosť: 64 000 kg * Pohotovostná hmotnosť: 22 900 kg * Nosnosť: 41 100 kg * Povolená celková hmotnosť: 64 000 kg * Výrobca náprav: BPW% * Stav pneumatík 1. nápravy: 70% – 70% – rozmery pneumatík: 235/75 R17,5 * Stav pneumatík 2. nápravy: 70% – 70% – rozmery pneumatík: 235/75 R17,5 * Stav pneumatík 3. nápravy: 70% – 70% – rozmery pneumatík: 235/75 R17,5 * Stav pneumatík 4. nápravy: 70% – 70% – rozmery pneumatík: 235/75 R17,5 * Rozmery pneumatík: 235/75 R17,5 * Teleskopický cca 4000 mm * Výška plošiny nad nápravami: cca 1000 mm * Výška plošiny nad zemou: cca 360 mm * Rozšíriteľný na 3200 mm * Odnímateľný husací krk Zrieknutie sa zodpovednosti: Zmena, predbežný predaj a chyby vyhradené Viac fotografií a videí nájdete na našej webovej stránke. Náš rozsiahly servis zahŕňa napríklad: * Nákup / predaj / prenájom úžitkových vozidiel * Rýchle a jednoduché financovanie * Vypracovanie všetkých (exportných) dokladov * Objednanie vývozných ŠPZ / colných značiek * Príprava vozidla: nové plachty, popisy, lakovanie atď. * Profesionálne nakladanie / zabezpečenie nákladu * TüV kontroly, registračný servis * Preprava úžitkových vozidiel Naši vyškolení odborníci Vám radi poradia.

Stav: nový, číslo stroja/vozidla: 3c70e9a5d82cfb3ada79baf95, pohotovostná hmotnosť: 8 kg, maximálna hmotnosť nákladu: 17 kg, celková hmotnosť: 26 kg, konfigurácia náprav: 2 nápravy, veľkosť pneumatiky: 205 / 65 r 17,5, Ďalšie informácie Podvozok: Podvozok pre náves / prepravná spoločnosť Konštrukcia zo zváraného jemnozrnného oceľového profilu, sedlová doska s vymeniteľným 2” kráľovským čapom, skosenie zadnej časti na cca 1920 mm, závesná lišta na rampy vzadu a vpredu na labuťom krku prebieha cez celú dĺžku, brúsne valce na zadnej časti, hlboké lôžko po zalomení až po nápravový agregát. Uvoľnenie výkresu zákazníkom je v prípade objednávky nevyhnutné! Pár kotviacich húb zapustených zhora a z boku do vonkajšieho rámu, každá s nosnosťou 10 t Pár kotviacich ôk zapustených do vonkajšieho rámu na labuťom krku, každá s nosnosťou 5 t 24 t, dvojrýchlostná podpera, jednostranné ovládanie, s rovným spodným dielom, bez posuvného vyrovnania Sklopné zadné podpery, montované vonku Kliny na podopretie kolies s držiakmi Bočná ochrana proti podjazdu z hliníka Ochrana proti podjazdu zo železa (ocele) pre EÚ, ak je to technicky možné Štvrtinové blatníky So striekacimi zásterkami v súlade s EÚ 1 pár kolísk na kolesá zapustených za labuťou krku v oblasti jazdných pruhov v hlbokom lôžku, so skosením na nájazd. Spodná dĺžka cca 1840 mm, hĺbka cca 200 mm. Druhý pár kolísk na kolies na zadnom skosení, hĺbka cca 200 mm. Upozornenie! Rám v hlavnej nosnej oblasti je o 200 mm vyšší než kolíska na koleso. V prípade objednávky je potrebná podrobná technická kontrola. Kryty kolísok na kolesá vysúvateľné z hlbokého lôžka s tvrdodrevenými vložkami, na zadnom skosení tiež s tvrdodrevenými vložkami. Elektrický lanový navijak, 24 V, ťahová sila 5 500 kg, namontovaný v zalomení labutieho krku, nezasahuje do ložnej plochy, ovládanie rádiovým diaľkovým ovládačom, dĺžka lana 35 m x cca 10 mm, s valčekovým oknom a snímateľnou navádzajúcou kladkou na zadnom skosení. Nápravy a pruženie: SAF alebo BPW bubnové brzdové nápravy podľa nášho výberu Vzduchové pruženie so zdvíhacím a spúšťacím ventilom + funkcia automatického resetu Kolesá a pneumatiky: Pneumatiky 205/65 R 17,5, označenie 129/127K (132/132G) s nosnosťou 8 t pri max. 90 km/h podľa výberu výrobcu Oceľové disky v dvojmontáži, továrenská strieborná farba Brzdový systém: Dvojhadicový pneumatický brzdový systém Pružinová parkovacia brzda 2 predné spojovacie hlavice s ochranou proti zámene, bez prepojovacej hadice EBS výrobca Haldex, elektronický brzdový systém s EBS zásuvkou vpredu, bez prepojovacieho kábla (na schválenie výpočtu bŕzd bol zákazníkovi zaslaný podklad 15.07.2021) Pozor: prívesné vozidlo smie ťahať len ťažné vozidlo, ktoré zabezpečí funkčnosť ABS! Detekcia zaťaženia náprav cez signál EBS CAN bus, zobrazenie na displeji v kabíne vodiča, nákladné vozidlo musí byť na to pripravené, nie je nainštalovaná cez kalibrovanú váhu. Elektrická výbava: 24 V, viackomorové zadné svetlá, bočné žlté LED osvetlenie 2 biele pozičné svetlá vpredu 2 bielo-červené vodiace svetlá vzadu 2 x 7-pólové a 1 x 15-pólová nezameniteľná zásuvka vpredu, bez prepojovacieho kábla Podlaha: Labučí krk s oceľovou/riflovanou platňou 30 mm vodeodolná preglejka, v hlbokom lôžku medzi nosníkmi stredom V jazdnom pruhu s ozubeným roštom, v kolískach na kolesá s oceľovou/riflovanou platňou Nájazdové rampy: Pár hliníkových rámp, dĺžka 3 200 mm, nosnosť na pár 12 000 kg Pár oceľových rámp na najazd do hlbokého lôžka Pár oceľových rámp na prejazd na labutí krk Bočnice: Rsdpoi Ri Hrjfx Advst Registrácia / značenie: Zem registrácie: Nemecko s certifikátom a posudkom Dekra (podľa §13 EG - FGV) Pripravené pre jednoriadkový držiak tabuľky Obrysové označenie reflexnými páskami podľa ECE R 048,

Stav: použitý, maximálna hmotnosť nákladu: 24 000 kg, celková hmotnosť: 34 500 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 03/1988, ďalšia kontrola (TÜV): 06/2026, Labuťový krk Dĺžka: 3350 mm Šírka: 2490 mm Polomer prehnutia: 2300 mm Zaťaženie na sedlo: 14 500 kg Výška pripojenia: 1 300 mm Hlboké ložisko Nakladacia plocha dĺžka: 4660 mm vrátane 400 mm skosenia Šírka: 2 500 mm Rozšíriteľné na 3 000 mm Nakladacia výška: 650 mm Podvozok Nakladacia výška naložené: 900 mm Dĺžka: 3 000 mm vrátane 800 mm skosenia Šírka: 2 500 mm Redpfsxc Dbhjx Advst Skosenie: 800 mm Zadné podopretie hydraulické 2-dielne hydraulické rampy Dĺžka 1: 2 500 mm Dĺžka 2: 1 100 mm Šírka: 720 mm Zaťaženie na sedlo: 14 500 kg Zaťaženie zadnej nápravy: 2 x 10 000 kg Celková hmotnosť: 34 500 kg Užitočné zaťaženie: 24 000 kg Vlastná hmotnosť: 10 500 kg

Stav: nový, maximálna hmotnosť nákladu: 30 190 kg, celková hmotnosť: 43 000 kg, konfigurácia náprav: 2 nápravy, Výbava: ABS, You can find our complete range of immediately and short-term available vehicles on our website. Excerpt from the equipment list. Full specification available upon request. Loading platform: - Low bed with externally mounted beams, extendable in SUPER LOW design, approx. 6,850 mm long - Low bed with fixed hardwood floor, approx. 40 mm thick, with mechanical locking - Supply lines are protected within the extendable beams and automatically adjust to the current low bed length - 5 pairs of outward-folding lashing rings (LC 10,000 daN) - 6 pairs of threaded blocks on the inner beam for mounting screw-in RUD rings Gooseneck: - Gooseneck in SNT design for optimum loading length, approx. 3,750 mm long - Gooseneck hydraulically lift/lowerable and removable - Technical fifth-wheel load: 23,000 kg - Suitable for tractor units (4x2, 6x2) Rear chassis: - Rear chassis in short design with closed outer frame and chequer plate cover Rodexarl Njpfx Advet - Chassis with excavator recess, closed at the rear section for housing air tanks - 2 pairs of outward-folding lashing rings (LC 5,000 daN) - 1 pair of outward-folding lashing rings (LC 10,000 daN) - 1 pair of horizontal lashing rings at front & rear of the chassis (LC 10,000 daN) Axles: - BPW axles with hydro-mechanical forced steering - Technical axle load: 12,000 kg each - Air suspension with lift/lower valve Tyres: - 245/70 R 17.5 3PMSF tyres, brand of our choice - Load index (146/146F) - TPMS tyre pressure monitoring system (ECE R 141 compliant) - Data transfer to tractor via standardised EBS interface per ISO 11992 - For proper display, the tractor unit must be able to transmit and display these data Brake system: - Brake system compliant with EU regulations with EBS-E (2S2M) Electrical system: - Electrical system per EU regulations, lighting 24 V ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX at the front wiring harness with sockets 24N, 24S & 15 pin according to ISO: 24N ISO-1185, 24S ISO-3731, 15 pin ISO-12098 Steel construction: - Steel structure made of high-strength fine-grained steels - Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: - Entire steel structure automatically shot-blasted after welding - Second blasting with corundum for optimal coating adhesion - Whole vehicle chassis metalized with ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection - Final coat with 2 layers of 2K topcoat, single-colour in RAL 3002 Carmine Red, per RAL system 841GL - Rims in silver - Rear section metalized and painted in RAL 9010 (Pure White) - No metallic finishes possible - Paint structure salt spray-tested per ISO 9227-NSS - Cavities sealed with special wax Includes the following additional equipment: - 2-inch king pin - One galvanized steel front wall, approx. 400 mm high - Remote steering at front and rear via cable remote control with push buttons, incl. single-wheel tracking (without installation in tractor unit) - Hydraulic connections from gooseneck to low bed via multi-coupling instead of screw couplings - Electro-hydraulic power unit - Preparation for mounting screwed container locks for one 20' or one 40' container on the outer beams - No container locks included

Stav: nový, maximálna hmotnosť nákladu: 48 300 kg, celková hmotnosť: 71 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Excerpt from the equipment. Complete equipment details available upon request. GOOSENECK: * Gooseneck with integrated single-axle running gear (pendulum axle) in removable design * Gooseneck hydraulically liftable and lowerable, including hydraulic connection linked with the hydraulic axle compensation of the first axles * Length: approx. 5,200 mm, with a front bevel of approx. 60° * Fifth wheel load according to data sheet: W25-DSR2700-12/22.7 * For tractor units: 6x4 or 8x4 * Front steel bulkhead, removable, approx. 400 mm high, in beveled design * 1 pair mechanical landing legs at the front of the gooseneck * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets * 1 spare wheel carrier inside on the front wall of the gooseneck with a crane arm * 2 pairs of flush-mounted lashing rings on the gooseneck (LC 2,500 daN) * 2 pairs of flush-mounted lashing rings in the front external frame of the running gear, fold-out to the outside (LC 10,000 daN) * 1 pair of lashing rings at the transition from the running gear to the loading platform (LC 10,600 daN) * On the gooseneck: 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized finish * On the gooseneck: 1 plug-in aluminum rear board, approx. 400 mm high, anodized finish * 3.5-inch kingpin * TPMS tire pressure monitoring system according to ECE R 141 * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * 1 INOX tool box with 1 lid, mounted on the gooseneck to the right in the direction of travel by the aluminum side wall, approx. 1,350 x 400 x 400 mm (L x W x H) LOADING PLATFORM: * Low bed with externally mounted beams, designed as a telescoping low-height loading platform with a front extension including a fixed approx. 50 mm thick hardwood floor * Length x width approx. 8,000 mm x 2,740 mm * Mechanical bolt and clevis coupling from low bed to running gear for swapping the loading platform or installing extension beams * Locking position approximately every 500 mm on the extension Rodjyhkqnepfx Advot * 4 pairs of flush-mounted lashing rings set into the loading platform, distributed along the external frame (LC 10,000 daN) * 1 lashing ring each left and right on the rear cross member (LC 10,000 daN) * Fold-out extensions, approx. 230 mm per side (WITHOUT wooden planks) * Loose extension planks, steel-framed * Prepared for installation of bolt-on container locks for 1x 20' or 1x 40' container on the side beams. Without container locks * 6 pairs of threaded blocks between the lashing rings under the upper flange on the side beams for mounting M24 lashing eyes (LC 8,000 daN) * 2 pairs of M24 lashing eyes (LC 8,000 daN) included REAR RUNNING GEAR: * Rear running gear with closed external frame, checker plate covering, and continuous prism excavator recess, approx. 1,450 x 900 x 505 mm, open at the rear * Pendulum axles, all axles hydro-mechanically force-steered * Hose rupture valve on the axle equalizing cylinders with automatic reset function * Hydraulic cylinders with shut-off valves and pre-insert for securing in raised position * Axles finish-painted with 2 layers of 2K paint, plain in DB 7350 Novagrau * Technical axle load: 12,000 kg each * Hydraulic axle compensation * 245/70 R 17.5 3PMSF. Brand at our discretion * Remote steering from front and rear via cable remote control, with axle alignment control, no installation in the tractor

Stav: nový, pohotovostná hmotnosť: 27 000 kg, maximálna hmotnosť nákladu: 72 500 kg, celková hmotnosť: 99 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 5 500 mm, šírka ložného priestoru: 2 750 mm, výška ložného priestoru: 550 mm, zavesenie: iný, veľkosť pneumatiky: 245/70 r 17,5, farba: sivý, Výbava: ABS, Removable gooseneck: Loading area 3,750 mm x 2,480 mm Technical fifth-wheel load up to max. 30,000 kg Hydromechanical steering Hydraulic lift and lower function 2 support cylinders Hydraulic function controls on the left side (driving direction) Access ladder to the gooseneck Hydraulic claw locking for deck or chassis Multi-function quick coupling Lighting for gooseneck control elements under the fold-down protection cover 3.5" king pin 2-axle front running gear: 4 wheels per axle line, ball-race mounted pendulum axle units Axle make: Gigant Chassis width 2,750 mm / Wheelbase 1,510 mm Hydraulic axle compensation, lift 600 mm Ride height: 1,145 mm +340 mm/-260 mm Redpfx Aohlz Rnjdvst Steel floor cover Brake system, 2-axle front running gear: Drum brakes, all-wheel air brake system Automatic load-dependent brake (ALB) (AGS) Parking brake via spring-loaded cylinders EBS / ABS (Electronic Brake System) Socket for EBS at the front of the gooseneck Duomatic coupling for brake connection between chassis and loading area Excavator deck 5,500 mm to 10,000 mm: Box-type inner/outer tube External tube height 400 mm Loading height 550 mm, ground clearance 150 mm Outer tube prepared for folding extension fittings 4-axle rear running gear: 4 wheels per axle line, ball-race mounted pendulum axle units Axle make: Gigant Chassis width 2,750 mm / Wheelbase 1,510 mm Hydraulic axle compensation, lift 600 mm Ride height: 1,100 mm +385 mm/-215 mm Steel floor cover Combined excavator trough Brake system, 4-axle rear running gear: Drum brake with automatic load-dependent brake (ALB) (AGS) Dual-circuit, all-wheel air brake system Parking brake via spring-loaded cylinders EBS / ABS (Electronic Brake System) Vehicle rear: Standard design 90°, 580 mm rear overhang from the center of the last axle No ramp attachments on the end cross-member Hydraulics: Hydraulic connections for tractor unit (1 set), connections for tractor (without lines), pump in tractor unit with maximum flow rate of 60 l/min, additional flow divider for tractor units up to 120 l/min. 6-way ball valve in gooseneck for zero-pressure switching of the gooseneck articulation Hydraulic unit with Hatz diesel engine, 10 kW, noise-dampened, hydraulic pump output 12 l/min, incl. electric starter and manual throttle, mounted on the side of the gooseneck. Standard paint finish in DB7350 nova grey, weight approx. 460 kg. Accessories included: Spare wheel holder on gooseneck deck with mounted spare wheel 2 pairs of wheel chocks Aluminum drop sides, 3-sided closed (with rear wall), 400 mm high, stakes (foldable and removable) Goldhofer "Premium" storage box, mounted at the front end of the gooseneck, corners chamfered at 45°, dimensions approx. 550 x 400 x 2,540 mm, with side doors and front-hinged rectangular lid, doors and lid lockable, inside with 2 removable divider panels. 2 pairs of warning panels, 423 x 423 mm, with 3 LED position lights, incl. slip-on tube for rotating beacon, warning panel holder extendable to max. 4,200 mm. Additional warning panel holder mounted on the front running gear LED rotating beacon (2 pcs), pluggable, light switched via parking light Central lubrication system, "Progressive" type for standard grease, with 3 pumps 2 pairs of lashing points M36, bolted, LC=16,000 daN, loose 1 sign "Convoi Exceptionnel" 1 set of approach ramps in aluminum design for front driving onto the excavator deck, 2-piece, with climbing strips

Stav: nový, pohotovostná hmotnosť: 12 800 kg, maximálna hmotnosť nákladu: 36 200 kg, celková hmotnosť: 49 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 850 mm, šírka ložného priestoru: 2 550 mm, výška ložného priestoru: 375 mm, veľkosť pneumatiky: 245/70 R 17.5, farba: sivý, prevádzková hmotnosť: 12 800 kg, Výbava: ABS, Gooseneck: - Gooseneck in SNT design to optimize loading platform length, length approx. 3,750 mm - Gooseneck hydraulically raisable/lowerable and detachable - Technical fifth wheel load: 25,000 kg - For tractor units: 4 x 2, 6 x 2, and 6 x 4 Loading Platform: - Low bed with external beams, designed as a telescopic vessel bridge in low-profile construction with front extension - Length 6,850 mm x width 2,540 mm - One locking position approx. every 1,000 mm on the extension Rear Chassis: - Rear chassis with closed outer frame, checker plate cover, and continuous prismatic excavator trough approx. 1,250/700 x 505 mm, open at the rear Rsdpfx Aevy Edcsdvst Axles, Suspension, and Tyres: - "PENDLE-AXLE", all axles hydro-mechanically forced-steered - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and locking pin for securing in lifted position - Axles finished with 2 coats of 2K acrylic paint, single color in "FAY-Grey-34-0260" - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres 245/70 R 17.5 - TPMS tire pressure monitoring system according to ECE R 14 - TPMS tire pressure sensors mounted in all wheels including spare wheels Accessories included: - Plug-in front wall made of steel, approx. 400 mm high - 3 kW electro-hydraulic unit for controlling hydraulic functions, except hydraulic winches - One spare wheel with mounting adapter - Outer beams on gooseneck with mounting holes for bolted lashing rings - Detachable ALU side walls on gooseneck, approx. 400 mm high, anodized - Detachable ALU rear wall on gooseneck, approx. 400 mm high, anodized - Checker plate cover above the gooseneck - Guide plate on gooseneck for the fifth wheel plate, approx. 500 mm wide - Operating area on gooseneck illuminated with on/off switch - Hydraulic crossbeam to support the gooseneck on the tractor unit or a dolly - 2" king pin - Anti-slip stickers on the left chamfer of the gooseneck - Rear upper part of the gooseneck closed with a removable cover - 4 wheel chocks with holders - Hydraulic connections from gooseneck to low bed with multi-coupling instead of screw couplings - 1 pair of steel ramps with climbing strips and mounting bolts for bridging the mounting hooks of the low bed - Ramps can be placed over or between the hooks - Mounting provision for steel ramps at the rear between the outer beams of the gooseneck - Prepared to accommodate bolt-on container mounts for 1x20ft on the outer beams - Mechanical pin-lug coupling from low bed to chassis for exchange of loading platform or installation of extension beams - With electro-pneumatic-hydraulic couplings - Outer beams of the low bed with integrally painted anti-slip sand layer - Removable (galvanized) loading floor in 3 sections insertable between outer beams with hardwood covering - Folding wideners, approx. 230 mm per side - Hanging bar at the front of the rear chassis for loose drive-on ramps for the low bed - 2 pairs of stake pockets recessed in the outer frame of the chassis, for plug-in stakes approx. 100 x 50 mm - Hanging bar for loose ALU ramps on the rear cross member of the vehicle - Central lubrication system with 2 pumps - Radio and cable remote control - 4 warning signs, approx. 423 mm x 423 mm, extendable - Extensive lashing positions

Stav: nový, maximálna hmotnosť nákladu: 33 750 kg, celková hmotnosť: 47 000 kg, konfigurácia náprav: 2 nápravy, celková šírka: 2 550 mm, Výbava: ABS, You can find our complete inventory of vehicles that are available for immediate and short-term delivery on our website. Excerpt from the equipment specification. Complete equipment details upon request. Gooseneck: - Gooseneck in SNT design for optimized loading area length, approx. 3,750 mm long - Gooseneck hydraulically liftable/lowerable and detachable - Technical fifth wheel load: 23,000 kg For tractors: 4 x 2, 6 x 2, and 6 x 4 Low bed: Redpfx Adsxbmn Uovst - Low bed with externally mounted, extendable beams in "SUPER LOW" design, approx. 6,850 mm long - Low bed with fixed hardwood flooring (approx. 40 mm thick) and mechanical locking - Supply lines routed protected within the extendable beams, automatically adjusting to the respective low bed length - 5 pairs of foldable lashing rings (LC 10,000 daN) - 6 pairs of threaded blocks on the inner beam for mounting screwable RUD rings Rear running gear: - Rear running gear with closed outer frame, chequer plate covering, and continuous prism-shaped excavator trough, approx. 1,250/700 x 505 mm, rear open - 2 pairs of foldable lashing rings (LC 10,000 daN) - 1 pair of horizontal lashing rings in the trough, LC 16,000 daN - 1 pair of horizontal lashing rings in the trough, LC 10,600 daN - 2 pairs of stake pockets for plug-in stakes, approx. 100 x 50 mm in the outer frame Pendel-axle: - Pendel-axle, all axles hydro-mechanically forced-steered - Hose rupture valve on the axle compensation cylinder with automatic reset function - Hydraulic cylinder with shut-off valves and guide pin for securing in the raised position - Final coating of axles with 2 layers of 2-component paint, single color in FAY-Grey-34-0260 - Technical axle load: each 12,000 kg, hydraulic axle compensation - Axle tools - Tyres: 245/70 R 17.5 3PMSF – manufacturer at our discretion. Load index (146/146F) TPMS: - TPMS tyre pressure monitoring system according to ECE R 141 Brake system: - Wabco brake system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Electrical system: - Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX on the front wiring rail with 24N, 24S, and 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel construction: - Steel construction made of high-strength fine-grained steels - Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Coating: - Complete steel construction automatically blast-cleaned with shot blast system after welding - Second blasting with corundum for optimal adhesion of the coating system - HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure optimal corrosion protection - Final coating with 2 layers of 2-component top coat, single color RAL 3002 carmine red according to the RAL 841GL system Including the following additional equipment: - 2-inch kingpin - One galvanized steel front wall, approx. 400 mm high - Steering control at the front and rear via cable remote control (pushbutton operated), including axle single-track monitoring (without installation in the tractor unit) - Electro-hydraulic power pack - 2 pairs of bolted container locks on the outer beams. Includes 2 pairs of container locks for 1x 20' or 1x 40' container - On the gooseneck, removable aluminium drop sides and rear wall, approx. 2,440 x 400 mm (L x H) - The rear galvaniz

Stav: použitý, maximálna hmotnosť nákladu: 6 800 kg, celková hmotnosť: 8 900 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 06/2012, dĺžka ložného priestoru: 4 000 mm, šírka ložného priestoru: 2 050 mm, výška ložného priestoru: 700 mm, celková šírka: 2 550 mm, Celková hmotnosť: 8 900 kg Pohotovostná hmotnosť: 2 100 kg Užitočné zaťaženie: 6 800 kg Celková dĺžka: 5 950 mm Dĺžka ložnej plochy: 4 000 mm Rsdpfxsycbkbj Advet Šírka: šírka ložnej plochy 2 050 mm / 2 550 mm Výška ložnej plochy: cca 630 mm Ďalšie informácie - Predný teleskopický podperný stojan - Ťažné oje výškovo nastaviteľné pomocou vretena - Jemnozrnná oceľová zváraná konštrukcia - Parabolické odpruženie - Oceľová podlaha s kríženým profilom - Veľký kotviaci balík - Rampy s oceľovým roštom

Stav: nový, maximálna hmotnosť nákladu: 9 070 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 500 mm, šírka ložného priestoru: 2 010 mm, výška ložného priestoru: 325 mm, Rok výroby: 2025, * ETS-TA-B 11,9: * Wabco EBS (elektronický brzdový systém) * RDÜ (monitorovanie tlaku v pneumatikách) * Bubnové brzdy, 2 x 5,5 t, nápravy Gigant * Parabolické pružiny s vyrovnávacou jednotkou * Výškovo nastaviteľné ťažné oje o 300 mm * BPW oporný mechanizmus * Mechanické padacie oporné nohy vzadu * Plastová náradiarska skrinka vpredu vpravo na čelnej stene * Bočná ochrana proti nárazu * LED osvetlenie * Podlaha z ihličnatého dreva 50 mm Rsdpfx Aewyhzvsdvet * V rohoch pred čelnou stenou a na zadnom nosníku vždy 1 x 6,3 t kotviaci krúžok, ako aj bočne vždy 2 x 6,3 t UVV upevňovacie krúžky zapustené vo vonkajšom ráme * Jednodielne mechanické rampy z roštov s pružinou pre obsluhu jednou osobou, cca 2 350 x 870 mm (vnútorný rozostup 20 mm, rampy nie sú posuvné) * Čelná stena, bočné steny, blatníky a ťažné oje žiarovo pozinkované * Nápravy, pružiny, vzduchojem, predný oporný mechanizmus lakovaný v čiernom odtieni * Nové vozidlo s plnou zárukou výrobcu * Chyby a medziobchod vyhradené * Ihneď k dodaniu z Egestorfu

Stav: použitý, pohotovostná hmotnosť: 9 900 kg, maximálna hmotnosť nákladu: 32 200 kg, celková hmotnosť: 42 100 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 10/2019, ďalšia kontrola (TÜV): 10/2025, dĺžka ložného priestoru: 13 280 mm, šírka ložného priestoru: 2 550 mm, zavesenie: vzduch, veľkosť pneumatiky: 235 / 75 R 17,5, farba: modrá, typ prevodu: iný, veľkosť prednej pneumatiky: 235 / 75 R 17,5, veľkosť zadnej pneumatiky: 235 / 75 R 17,5, kabína vodiča: iný, emisná trieda: žiadny, Základná farba: modrá Rodpex Nbpfsfx Advst Doplnky vo výbave Vzduchové odpruženie, odpruženie: vzduch-vzduch, užitočné zaťaženie (kg): 32 200 Typ nadstavby: 3-nápravový výsuvný nízkozdvižný podvozok, dĺžka nízkozdvižnej časti 4 200 + 2 500 mm, celková nakladacia dĺžka 13 280 + 2 500 mm, výrezy pre kolesá s vyberateľným krytom, rozšírenia do 3 000 mm, vlastná hydraulika - vyžaduje sa len elektrina 24 V cez NATO zásuvku, hydraulický navijak Comeup DV 18, hydraulické rampy 2 400 x 650 mm, nakladacia výška v nízkozdvižnej časti cca 455 mm, všetky nápravy vzduchom odpružené, posledná náprava vlečená, pozinkovaný rám, celková povolená hmotnosť 48 000 kg

Stav: nový, maximálna hmotnosť nákladu: 29 260 kg, celková hmotnosť: 42 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 200 mm, výška ložného priestoru: 900 mm, celková šírka: 2 550 mm, celková výška: 3 570 mm, Rok výroby: 2025, Výbava: ABS, Kässbohrer SLAR3 Tele Lowbed Trailer with Wheel Wells Technical Specifications: Model and Manufacturer * Model: Kässbohrer K.SLA R 3 / 1N - 18 / 30 * Manufacturer: Kässbohrer Rsdjx Epaqjpfx Advet * Type: Extendable wheel-well lowbed semi-trailer, suitable for transporting vehicles and heavy machinery. Dimensions * Overall length: 13,190 mm * Gooseneck length: 3,950 mm * Platform length: 9,240 mm * Extension: 3,500 mm (Pe) * Overall width: 2,550 mm (expandable by 600 mm with side extensions) * Fifth wheel height: 1,250 mm * Platform height: 875 mm * Ramp length: 2,750 mm * Ramp width: 850 mm * Wheelbase: 7,800 mm * Axle spacing: 2,260 mm Weights and Capacities * Permissible gross weight: - 52,800 kg at 60 km/h - 48,000 kg at 80 km/h * Unladen weight: 12,744 kg ±3% * Axle capacity: 30,000 kg (10 tonnes per axle) * Kingpin load: 18,000 kg Axle Equipment * Number of axles: 3 (2 rigid at the front, 1 trailing axle at the rear) * Lift axle: First axle, operated manually depending on load * Axle material: BPW axles with drum brakes Tyres and Rims * Tyre size: 245/70 R17.5 * Tyre brand: GOODYEAR * Tyre markings: M+S Label and 3PMSF certification * Tyre pressure monitoring system: Increases fuel efficiency and extends tyre life * Number of rims: 12 steel rims, offset ET120 Chassis and Suspension * Suspension: Air suspension with load gauge * Brake system: Dual-circuit compressed air brake by WABCO, EBS 4S/3M with ABS and RSS (roll stability control) Lighting and Electrics * Lighting: 24V, ASPÖCK multi-chamber lights, LED side marker and taillights * Coupling type: Standard yellow/red for air supply connection * Connectors: NATO socket with 2 x 50mm² intermediate cables (3 m length) Ramps * Type: Foldable hydraulic drive-on ramps with sliding mechanism * Capacity: 40 tonnes * Ramp surface: Made of hardwood * Safety: Ramp safety chain included Load Securing * Lashing rings: - 2 x 2 with 5,000 daN capacity each - 1 x 2 with 10,000 daN capacity on the gooseneck - 4 x 2 lashing rings with 6,000 daN in the well area * Container lock housings: Suitable for transporting 1 x 20 FT or 1 x 30 FT container * Stake pockets: 5 x 2 stakes (50 mm x 100 mm) Special Features * Gooseneck: With 90° vertical corners, robust and durable * Flooring: 45 mm thick hardwood floor and steel floor with anti-slip dot pattern * Wheel-well bridge: Bridges made of sectional hardwoods with steel plates to cover the wheel wells * Toolbox: PVC-coated steel, dimensions 750 x 400 x 360 mm Colours * Chassis: Traffic red (RAL 3020) / also available in black * Partial metallization of contact surfaces Condition New and ready for immediate use. * Ideally suited for heavy-duty transport and for use in the construction industry or machinery relocation.

Stav: použitý, najazdené kilometre: 330 125 km, výkon: 315 kW (428,28 k), prvá registrácia: 04/2016, typ paliva: nafta, pohotovostná hmotnosť: 7 580 kg, maximálna hmotnosť nákladu: 11 420 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 4x2, rázvor náprav: 3 600 mm, ďalšia kontrola (TÜV): 05/2025, palivo: nafta, brzdy: brzdenie motorom, farba: čierny, kabína vodiča: iný, typ prevodu: automatický, emisná trieda: Euro 6, zavesenie: oceľ, počet sedadiel: 2, Rok výroby: 2016, Výbava: ABS, centrálne zamykanie, elektronický stabilizačný program (ESP), hmlové svetlá, klimatizácia, palubný počítač, prípojné zariadenie, sadzový filter, systém kontroly trakcie, tempomat, uzávierka diferenciálu, ďalšie svetlomety, Complete German combination, from one owner, special low-bed trailer from premium manufacturer GLORIA, original price €174,000 net, ONLY 6cm loading height, extremely easy loading and unloading thanks to a fully automatic, remote-controlled, swiveling rear axle. Suitable for almost all low-slung sports cars, classic cars, and commercial vehicles. Rear axle is steerable via remote control, with lift axle; extremely stable driving behavior due to self-weight. NO excess width. Low-bed dimensions: 5.5m x 2.0m. Condition: see photos. Body/construction: tractor unit, trailer hitch, total towing weight 40,000kg, 24V / 15-pin trailer socket, axle load measuring system. Mercedes-Benz PowerShift transmission: 12-speed – type G 211-12. Engine: 10.7 L – 315 kW inline 6-cylinder diesel (OM 470), EURO 6 standard, air conditioning. Driver assistance systems: Attention Assist (fatigue detection sensor), lane-keeping assistant, stability control assistant, residual heat utilization, fleet management system interface, cruise control, electric window lifters, fog lights with LED daytime running lights and cornering light, comfort locking system, central locking with remote control, rear axle differential lock, rear axle crown wheel 440, lift axle preparation/switch on the semi-trailer/trailer, passenger comfort seat, driver comfort suspension seat, driver seat backrest foldable. Movable cab access, hydraulic cab tilting, suspension: leaf/air, compressed air connection in cab. Seat cover/upholstery: fabric, work lights, electrically adjustable and heated exterior mirrors. Electronic brake system (EPB) with ABS+ASR, aluminum air tank, medium air supply unit, air horn, tinted windshield (with band filter), urea tank (AdBlue): 60 liters, aluminum fuel tank 290 liters, left, reinforced engine brake, chassis lowering with bellows residual pressure control, disc brakes front and rear, front axle stabilizer. Rsdov Dl Hrepfx Advjt If a new TÜV inspection is desired, we will be happy to provide an offer from one of our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, without new UVV. Further trucks can be found on our homepage at We speak the following languages: German, English, Polish, Turkish. Note: We offer and strongly recommend viewing and inspection of the goods, so that there are no misunderstandings about the condition and suitability for the buyer. Viewing and inspection are possible by appointment at any time and are expressly encouraged. All information provided without guarantee. No liability is accepted for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.

Stav: použitý, pohotovostná hmotnosť: 5 720 kg, maximálna hmotnosť nákladu: 5 280 kg, celková hmotnosť: 11 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 04/2021, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: čierny, Rok výroby: 2021, typ prevodu: iný, kabína vodiča: iný, Výbava: ABS, * Nemecký príves * Od prvého majiteľa * Stav: viď fotografie * Špeciálny nízkoložný príves (lowloader) od prémiovej značky GLORIA, typ SO42 * Nová cena v roku 2021: 174.000 € bez DPH * Preprava znížených vozidiel vďaka nízkej nakladacej výške možná * Individuálna konštrukcia a výroba – Phantom Rider * Nakladanie a vykladanie vozidla do 10 minút * Dvere vozidla je možné vždy otvoriť * Dĺžka ložnej plochy cca 5 500 mm x šírka 2 080 mm * Vzdialenosť medzi platformou a vozovkou nastaviteľná od 0 do 25 cm, počas jazdy do 20 km/h * Bežná výška ložnej plochy 6 až 10 cm * Extrémne tichý chod vďaka vzduchovému odpruženiu a vysokej vlastnej hmotnosti 6 000 kg * Otočné taniere pre predné kolesá vozidla umožňujú manévrovanie * Zadná náprava hydraulicky výklopná do strany * Žiadne nadrozmery, neobmedzená účasť v cestnej premávke * Riadenie cez vysielaciu a prijímaciu hydrauliku nastaviteľné pre reálne efekty * Možnosť zablokovania riadenia * Pripojenie na stlačený vzduch * Rám z rúr pre plachtu 12x8 alebo 8x8 nad platformou, nastaviteľný výškovo, rýchlo demontovateľný * Rúrkový rám pre plachtu 8x8 pred platformou, rýchlo demontovateľný * 24V batéria pre autonómnu prevádzku, vrátane simulácie dátovej zbernice * Celková hmotnosť 11 000 kg * Pohotovostná hmotnosť 5 720 kg * Nosnosť 5 280 kg * Nemecké vozidlo * Originálny počet najazdených km: LEN 330 248 km * Karoséria/nadstavba: ťažné vozidlo (sedačka na sedlový náves) * Motor: 10,7 l, 315 kW, R6 Diesel (OM 470) * Norma EURO 6 * Ťažné zariadenie * Celková hmotnosť jazdnej súpravy 40 000 kg * Zariadenie na meranie zaťaženia náprav * Prevodovka Mercedes-Benz PowerShift * 12-stupňová prevodovka, typ: G 211-12 * Klimatizácia * Asistent jazdy: Attention Assist (detekcia únavy) * Asistent jazdy: Lane Keeping Assist * Asistent jazdy: Stability Control Assist * Využitie zvyškového tepla * Tempomat * Elektrické ovládanie okien V prípade záujmu o nové technické osvedčenie (TÜV) Vám radi pripravíme ponuku od našich partnerských servisov. Naša ponuka je vo všeobecnosti BEZ nového TÜV, bez novej DGUV, bez novej SP, bez novej UVV. Ďalšie nákladné vozidlá nájdete na našej webstránke: Rozprávame týmito jazykmi: nemecky, anglicky, poľsky, turecky Rodpjv Dvuyofx Advjt Upozornenie: Dôrazne odporúčame obhliadku a kontrolu tovaru, aby kupujúci nemal mylné predstavy o vlastnostiach a vhodnosti. Obhliadky a kontroly sú možné kedykoľvek po dohode a sú výslovne žiadané. Všetky údaje bez záruky. Za omyly a chybné údaje v ponuke nepreberáme zodpovednosť. Kupujúci je povinný sa sám presvedčiť o stave a výbave tovaru/vozidla. Zmeny, predbežný predaj a omyly vyhradené.

Stav: použitý, pohotovostná hmotnosť: 5 720 kg, maximálna hmotnosť nákladu: 5 280 kg, celková hmotnosť: 11 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 04/2021, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: čierny, Rok výroby: 2021, typ prevodu: iný, kabína vodiča: iný, Výbava: ABS, * German trailer * From first owner * Special low-bed lowloader trailer by premium brand GLORIA, model SO42 * New price in 2021: €174,000 (net) * Condition: see photos * Custom construction and manufacture "Phantom Rider" * Remote control * Rear axle hydraulically extendable sideways * Extremely stable driving behavior thanks to air suspension and high unladen weight of 6,000 kg Rsdev D N Exopfx Advjt * 24V battery for autonomous operation, including databus release simulation * Platform-to-road clearance can be variably adjusted from 0 to 25 centimeters while driving up to 20 km/h * Loading and unloading of vehicles in less than 10 minutes * Turntable for the vehicle's front wheels enables steering movement simulation * No excess width, unrestricted use on public roads * Steering lockable * Steering control via master and slave hydraulics, adjustable for realistic effects * Load floor length approx. 5,500 mm x width 2,080 mm * Standard ride height from 6 to 10 centimeters * Transport of lowered vehicles possible due to low loading height * Vehicle doors can always be opened * Tube frame for 8x8 tarpaulin mount in front of the platform, quickly removable * Tube frame for 12x8 or 8x8 tarpaulin mount above the platform, height-adjustable and quickly removable * Gross weight 11,000 kg * Unladen weight 5,720 kg * Payload 5,280 kg If a new TÜV inspection is required, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, without new UVV. You can find further trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspection of the item to avoid any misconceptions regarding the condition and suitability by the buyer. Viewings and inspections are possible at any time by appointment and explicitly encouraged. All information is provided without guarantee. We accept no liability for errors or incorrect information in this offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to alterations, prior sale, and errors.

Stav: použitý, maximálna hmotnosť nákladu: 42 400 kg, celková hmotnosť: 64 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 01/2011, Výbava: ABS, Goldhofer STZ-VLS4-37/80 and Goldhofer Dolly SX 1-25/80 – Height-adjustable low bed with detachable gooseneck ---- * Manufacturer: Goldhofer * Model: STZ-VLS4-37/80 * First registration: 01/2011 * Colour: Yellow * Gross weight: 64,000 kg * Unladen weight (as per registration): 21,600 kg * Axles: 4x BPW axles, with the 1st axle steered via turntable steering, the other 3 axles are forced-steered by hydromechanical system * Steering axles up to max. 45 degrees * Tyres: 235/75 R17.5, approx. 70% tread * Suspension: Air suspension with lifting and lowering function * EBS Wabco * Detachable gooseneck with aluminium side boards * Hydraulic cylinders for support on the tractor unit * Toolbox with flap at the front of the gooseneck * Controls and manometer on left side of gooseneck * Gooseneck designed for freely turning 1-axle dollies * Low bed hydraulically liftable/lowerable to chassis * Chassis with excavator trough (from 2nd axle) * Extendable load area widening: 440mm (2x 220mm) and 700mm (2x 350mm) * Timber planks for bridging between widenings * Air suspension with lifting/lowering ranging min. 825mm to 1,025mm (not for driving) * 2 preset ride heights: * 1st ride height 925mm +100mm/-100mm * 2nd ride height 885mm +100mm/-100mm * 2 pairs of recessed lashing rings in gooseneck floor * 5 pairs of recessed lashing rings in low bed floor * 5 pairs of side lashing rings on low bed chassis * 4 pairs of stake pocket holes in low bed floor * 3 pairs of recessed lashing rings in chassis floor * 2 pairs of side lashing rings on chassis * 2 pairs of stake pocket holes in chassis floor * 2 lashing rings in excavator trough * Rear of the vehicle tapered by 10 degrees * One-piece hydraulic ramps (2,850mm x 720mm) and hydraulic rear supports * Controls for hydraulic ramps and supports at rear left * Smartboard at rear right * Additional LED reversing lights mounted on gooseneck and rear of low loader * 1st owner German vehicle! German documents! 1st owner! --- Goldhofer SX 1-25/80 Dolly ---- * Manufacturer: Goldhofer * Model: SX 1-25/80 * First registration: 03/2011 * Colour: Yellow * Gross weight: 28,000 kg * Unladen weight (as per registration): 2,750 kg * Axles: 1x BPW axle * Tyres: 235/75 R17.5 approx. 70% tread / twin tyres * 3" fifth wheel plate Rodpsx Suzaefx Advst * Single mudguards * Supports * Load manometer * 1st owner German vehicle! German documents!

Stav: nový, pohotovostná hmotnosť: 11 000 kg, maximálna hmotnosť nákladu: 27 000 kg, celková hmotnosť: 38 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 300 mm, šírka ložného priestoru: 2 550 mm, veľkosť pneumatiky: 235/75 R17.5, farba: sivý, prevádzková hmotnosť: 11 000 kg, Výbava: ABS, Chassis: - Welded steel frame construction with front and rear frame cranking and lowbed without rear bevel - Gooseneck + king pin plate 225 mm - Lowbed designed for point load of 25 t over 5 m - Outer frame closed to the outside with welded lashing rings for securing cargo - Interchangeable 2" king pin - Rear hanging track for aluminum ramps Axles and Tyres: - BPW low loader axles, each with 10 t axle load, air bellows diameter 360 mm - Air suspension with lifting and lowering device, lift 220 mm (-60/+160 mm) - Wabco SmartBoard with ECAS function for 2 coupling heights + 100 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - IVTM tire pressure monitoring system - 9 tires 235/75 R 17.5, tubeless Steering: - 1st and 2nd axle hydraulically forced steering via fifth wheel coupling Floor: - Laminated multi-layer floor, 27 mm thick, flush with outer frame and longitudinal beams - Reinforced underneath with GRP coating - 12 pairs of lashing rings welded into the outer frame (8 pairs RUD 8 t – 6 pairs in the lowbed as well as one pair each on the gooseneck and at the start of the rear compartment – 2 pairs each of 4 t lashing rings on the gooseneck and rear compartment) - 6 pairs of mushroom lashing points in the outer frame lowbed - Storage compartment with lid in the lowbed floor front left and right Front Wall: - 25 mm aluminum hollow profiles extended up to the lower roof edge with integrated curtain tensioning device Curtain Sides: Rodpfxjiu Eu Nj Advet - Curtains on both sides with welded-in vertical and horizontal straps (spacing approx. 600 mm) and tension locks made of stainless steel - Adjustable curtain straps (over-center type) for loading width up to 4,000 mm including curtain extension with press studs and Velcro fastener - Curtain extension to the driving direction: 300 mm, in height: 750 mm - With eyelets for loose curtain extension part - 1 pair of vertical curtain pockets approx. 1,000 mm long, positioned in the lowbed at the front cranking - With strap pockets Rear Wall: - Steel tail portal frame with side curtain retaining bracket - Aluminum double-wing door, 25 mm thick - Both door wings fully folding with door retainers - Each door wing with one double hinge and two recessed grip pockets Front Corner Posts: - At roof height, bolted to the front end Center Posts: - 3 pairs of infinitely adjustable folding posts - Posts are movable along the entire length by means of rollers - Center posts in lowbed also fixable at the rear platform Roof: - EDSCHA sliding roof (galvanized) with transverse bows, can be shifted in both directions (pushed together at the front in the load area) - Rear portal crossbar can be swivelled away - PVC tarpaulin roof without customs closure - Manual hydraulic lifting roof on both sides, lift 450 mm - Retractable roof can be operated in front (9x50) and rear (9x50) raised positions - Including curtain extension and curtain tail at the rear - Roof canopy at the very front of the front wall, each extendable by 900 mm with crank Accessories: - Extensible warning signs (removable at front and rear with socket), incl. position lights up to loading width of 4,000 mm - Storage for 4 warning signs inside front wall, top right and left - 1 aluminum ladder with holder, 2,500 mm long, at the front wall - 2 rows of self-locking aluminum slats - Sheet metal fenders with mud flaps - 1 night parking sign and 1 ADR sign on the rear wall - Central lubrication system BEKAMAX with pump and grease