Nízkopodlažný náves

MAX Trailer 6-(2+4)-Achs-Tiefbett-Kombination

Stav: nový, pohotovostná hmotnosť: 22 700 kg, maximálna hmotnosť nákladu: 79 300 kg, celková hmotnosť: 102 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 11 000 mm, šírka ložného priestoru: 2 850 mm, výška ložného priestoru: 920 mm, veľkosť pneumatiky: 245/70 R 17.5, farba: sivý, prevádzková hmotnosť: 22 700 kg, Výbava: ABS, Swan neck: - Swan neck in SNT design for optimizing the loading platform length, approx. 3,750 mm long, with rear chamfer approx. 850 mm x 10° - Hydraulically raisable and lowerable, lifting stroke ± 250 mm including hydraulic connection linked to the hydraulic axle compensation of the first two axles - Open at the rear third - Suitable for tractor units: 6 x 4 and 8 x 4 Loading platform: - Extendable loading platform, approx. 11,000 mm long with rear chamfer approx. 500 mm x 10°. - Recess in the loading platform including in the bevel for accommodating the excavator bucket arm, approx. 4,240 x 900 x 440 mm - Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the respective platform length Ramps: - Pair of two-part steel ramps, approx. 4,650 mm long and 900 mm wide - Hydraulically foldable ramp tips - Ramps hydraulically adjustable sideways approx. 235 mm outward and approx. 215 mm inward, individually - "Super Grip" rubber surface 25 mm and steel plate approx. 5 mm as additional reinforcement on the loading platform bevel - Rectangular climbing strips 20x30 mm, approx. every 200 mm on the outer ramp frame Axles, suspension and tyres: - PA-X axle system, all axles force-steered hydro-mechanically Lajdpfx Apsk Af Sve Iod - Steering behavior of the first two axles can be optimally adjusted to the loading platform length, both mechanically and hydraulically - Hose rupture valve on the axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pins for securing in raised position - 245/70 R 17.5 3PMSF Accessories included: - Removable steel front wall, approx. 400 mm high - Supply line connection strip for tractor unit, mounted at the height of the outer frame profile - 1 spare wheel - Outer beams of the swan neck with mounting holes for screwable lashing rings - First hole approx. 200 mm from front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - Tread plate covering over the swan neck - On the swan neck, 1 pair of removable ALU side walls, approx. 400 mm high, anodized - Removable ALU rear wall on the swan neck, approx. 400 mm high, anodized - 3.5" king pin / 2" king pin mounted - Guide plate on the swan neck for the fifth wheel, approx. 500 mm wide - 4 wheel chocks - 4 axle load gauges - Mechanical drop supports at the front - 1-piece INOX toolbox, approx. 2,480 x 340 x 390 mm - Mechanical drop supports at the front - Continuous steel plate covering on the loading platform with painted-on sand layer as slip protection - 1 intermediate table, approx. 500 mm wide, for extension, with elongated holes for insertable and repositionable bridging elements - Painted-on sand coating on the support surfaces of the intermediate table - Mechanical lock for locking the intermediate table when extended - 8 pairs of stake pockets in the outer frame - Extendable galvanized widening sections, approx. 230 mm per side - 1 pair of hydraulic rear supports - Central lubrication system - 1 reversing spotlight each on the left and right at the rear of the vehicle - 3 kW electric-hydraulic power unit - Loose widening planks in reinforced steel U-profile frame - Radio and cable remote control - 4 warning signs, approx. 423 x 423 mm

Stav: použitý, maximálna hmotnosť nákladu: 52 100 kg, celková hmotnosť: 70 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 01/2009, ďalšia kontrola (TÜV): 03/2026, dĺžka ložného priestoru: 24 400 mm, šírka ložného priestoru: 2 550 mm, celková šírka: 2 550 mm, celková výška: 2 500 mm, Výbava: ABS, Goldhofer nízkopodvozný príves s predĺženou ložnou plošťou Lajdpfx Apswta Dpo Iod * 5 náprav, dvojité pneumatiky * Výsuvná nízka ložná plocha (8 m) * 1. náprava zdvíhateľná * 4 posledné nápravy s núteným riadením * Hydraulické podpery * Centrálne mazacie zariadenie * Nápravy BPW s bubnovými brzdami ----* Pneumatiky: 235/75 E17,5 * Max. celková hmotnosť: 70 000 kg * Vlastná hmotnosť: 17 900 kg * Výška ložnej plochy: 0,85 m * Šírka ložnej plochy: 2,55 m * Dĺžka nízkej ložnej plochy: 12,00 m – 20,00 m * Dĺžka predĺženej ložnej plochy: 4,0 m -----Číslo vozidla: 11037----Chyby a medzipredaj vyhradené----Reklamy a rôzne nápisy boli digitálne odstránené.-----Radi vám pomôžeme so všetkými formalitami, ktoré sú spojené s kúpou vozidla. Stačí, ak nám oznámite vaše požiadavky a návrhy a my sa o to postaráme. Okrem iného vám za príplatok môžeme ponúknuť nasledujúce služby:----* Preberieme vaše staré vozidlo * Technická kontrola/STK * Kompletné vybavovanie exportu * Sprostredkovanie financovania * Žiadosť o exportné ŠPZ * Preprava vozidiel * Registrácia vozidiel * Vyzdvihovanie a preprava vozidiel ----?VÁŠ TÍM VTS

Stav: použitý, maximálna hmotnosť nákladu: 106 500 kg, celková hmotnosť: 143 200 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 06/2023, Weights, speed: 80 km/h Fifth-wheel load: 26,000 kg – 35,000 kg Axle load: 8 x 12,000 kg – 14,000 kg Gross vehicle weight rating: 126,000 kg – 143,200 kg Curb weight: approx. 36,700 kg Gooseneck length x width: 3,755 mm x 2,480 mm Fifth-wheel height (loaded): 1,350 mm Articulation radius front/rear: 1,350 mm / 2,750 mm Lajdowcy Nqspfx Ap Ijd King pin: 3.5'' Fifth-wheel load: 26,000 kg – 35,000 kg Unladen weight: 4,200 kg 3-axle chassis at front, single tires 285/70 R 19.5 with pendulum axles, 12–14 t axle load Steering: opposite-steered axle arrangement Wheelbase: 1,500 mm Chassis width: 2,850 mm Unladen weight: Flatbed platform, single extending with rear separation point Length x width: 7,000 mm x 2,850 mm, extendable to 3,250 mm Extendable by: 4,000 mm Deck height: 350 mm Unladen weight: 10,000 kg Extensions: Removable drop-in decks 5-axle "Prisma" chassis at rear, single tires 285/70 R 19.5 with pendulum axles, 12–14 t axle load Steering: forced steering Wheelbase: 1,500 mm Chassis width: 2,850 mm Unladen weight: 12,150 kg Radio remote control for all functions Central lubrication system

Stav: nový, pohotovostná hmotnosť: 9 600 kg, maximálna hmotnosť nákladu: 53 400 kg, celková hmotnosť: 63 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 12 400 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 1 340 mm, zavesenie: vzduch, veľkosť pneumatiky: 385/65 R22.5, farba: sivý, Výbava: ABS, Loading area: - Loading platform with approx. 30 mm thick hardwood floor - 10 pairs of fold-out lashing rings on the outside Laodpfx Aorq Dlfjp Ijd Landing legs: - JOST landing legs with 2-speed gearbox for 24 t lifting capacity Axles and tyres: - BPW axles, technical capacity 10,000 kg, first axle rigid, all other axles hydro-mechanically forced-steered, mounted on turntables - Air suspension with raise and lower valve - Axle tools - Tyres 385/65 R22.5 Braking system: - WABCO braking system according to EU regulations with EBS-E (4S3M) Steel construction: - Steel structure made from high-tensile fine-grain steels - Steel grades: S355J2+N/S355MC S690QL/S700MC Electrical system: - Electrical system according to EU regulations, lighting 24 Volt - ASPÖCK UNIBOX on the front connector strip with 24N, 24S & 15-pin sockets - Connections compliant with ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Painting: - First-class and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component zinc dust primer - High-quality 2-component top coat in a single colour, Nova grey - Rear section metallised and painted in RAL 9010 Accessories included: - Loading area with approx. 30 mm thick hardwood floor - 2" king pin - Galvanised steel front wall approx. 1,200 mm high, EN12642-XL - Yellow-red air couplings at the galvanised front connector strip - 4 wheel chocks with holders at the front wall - Storage for 1,000 mm stake pockets in the central beam at the rear - At the gooseneck and rear plate left and right each a holder for warning signs incl. socket - Remote axle steering operation from the front and rear via cable remote control with push buttons and tracking control - Electro-hydraulic power unit - White reflective tape on sides and red at rear according to EU regulations - 12 pairs of stake pockets for 100 x 50 mm stanchions in the external frame of the loading area - European reflector plates at the rear of the trailer - Mount for a rotating beacon at the rear of the trailer - One mudflap at the trailer rear - Manual and documentation on USB stick - BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and detachable cover around the pump TPMS Tyre Pressure Monitoring System: - For correct display, the towing vehicle must be able to transmit and display this data - Lift axle on the front axle with control via TEBS E, dependent on the current axle load and loading status - Radio remote control for axle steering, in addition to cable remote, with indicator lights on the receiver for tracking control - 5 pairs of stake pocket strips, mounted crosswise on the loading area, for 100 x 50 mm stanchions - 80 km/h speed stickers, mounted at the rear and on both sides - Adjustable access ladder mounted left and right in the direction of travel - 2 reversing lights mounted on the rear panel - Load pressure gauge to determine axle loads including load chart - HRM metallisation of the external frame: Complete steel structure shot-blasted, then the defined visible areas are metallised and hot-finished with ZINACOR 850 (zinc 85% - aluminium 15%)

Stav: nový, maximálna hmotnosť nákladu: 73 540 kg, celková hmotnosť: 102 000 kg, konfigurácia náprav: 3 nápravy, Výbava: ABS, Our complete vehicle inventory, including immediately and short-term available vehicles, can be found on our website. Excerpt from the equipment. Full specifications available on request. Gooseneck: * Gooseneck hydraulically height-adjustable and detachable, length approx. 3,650 mm * 2 pairs of folding lashing rings on the outer side (LC 5,000 daN) * 2 pairs of lashing rings on the gooseneck (LC 10,600 daN) * 1 pair of lashing rings at the center section of the gooseneck (LC 10,600 daN) * For 6x4 or 8x4 2-axle tractor units Compact front axle assembly: Lsdoxbmplspfx Ap Iead * Hook coupling front and rear, length approx. 2,200 mm * Chassis width: approx. 2,850 mm Excavator deck: Telescopic excavator deck with drive-over bridge hooks at the front and pin-eye coupling at the rear * Base width: approx. 2,850 mm * Length: approx. 6,650 mm * Beam height: approx. 400 mm * Beam width: approx. 1,350 mm * Loading height approx. 550 mm at ground clearance approx. 150 mm 4-axle rear axle assembly: * Mechanical pin-lug coupling for installing a low-bed at the front * Rear cross member, chassis width: approx. 2,850 mm * Chassis length: approx. 5,480 mm Pendulum axles, all axles hydro-mechanically forced-steered * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation Tyres * Front axle assembly: * 8 x manufacturer’s choice (M+S) 285/70 R19.5 * Rear axle assembly tyres: * 16 x manufacturer’s choice (M+S) 285/70 R19.5 * Load index 150/148J Paintwork: * Complete steel structure automatically shot-blasted after welding using a shot wheel blast system. Second blasting operation with corundum for optimum adhesion of the coating system * HRM metallisation of the entire chassis using ZINACOR 850 (85% zinc/15% aluminium) to guarantee best corrosion protection * Final coating with 2 layers of 2K top coat, single colour in RAL 3002 carmine red, according to RAL 841GL system Including the following accessories * Steel front wall, approx. 400 mm high * Removable ALU side walls and rear wall on the gooseneck, approx. 400 mm high, anodised version * 3.5-inch kingpin * Truck hydraulic connection with flow regulator (20 l/min) * Gantry for suspending supply lines, the tank of the tractor unit must hold at least 80 l * With MAX Trailer coupling pieces, otherwise coupling pieces to be provided by the customer ex works * BEKA-MAX central lubrication system for one gooseneck with universal grease NLGI-2 * Tool kit item no. 612452 * Multi-coupling hydraulic connections on the gooseneck * Front axle assembly with a separate air connection for air screwdriver * BEKA-MAX central lubrication system for a 2-axle bogie with universal grease NLGI-2 * One 7-pin socket left and right at the rear of the front axle assembly for warning signs * Screw-in option (diameter approx. 40 mm) every approx. 500 mm on the upper flange of the outer tube of the excavator deck for screw-on rings (LC 16,000 daN) * Folding extensions with steel pads, adjustable in width from approx. 2,850 mm to approx. 3,250 mm * BEKA-MAX central lubrication system for a 4-axle bogie with universal grease NLGI-2 * At the rear axle assembly a socket for the cable remote control of the rear axle steering * Rear bogie with trough * Two INOX toolboxes, approx. 855 x 340 x 390 mm, on the gooseneck, left and right * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery * Radio remote control: * Operation of the powerpack, start/stop of the diesel engine * Operation of the rear axl

Stav: nový, pohotovostná hmotnosť: 29 600 kg, maximálna hmotnosť nákladu: 72 400 kg, celková hmotnosť: 102 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 6 650 mm, šírka ložného priestoru: 2 840 mm, výška ložného priestoru: 550 mm, veľkosť pneumatiky: 285/70 R19.5, farba: sivý, prevádzková hmotnosť: 29 600 kg, Výbava: ABS, Gooseneck: - Hydraulically liftable/lowerable and detachable gooseneck - Length approx. 3,650 mm - For tractor units: 6 x 4 or 8 x 4 2-Axle Front Bogie: - Hook couplings front and rear - Chassis length x width approx. 2,200 mm x 2,850 mm Excavator Deck “BB-A”: - Telescopic excavator deck “BB-A” with drive-over deck hooks at the front and pin & lug coupling at the rear - Length x base width approx. 6,650 mm x 2,850 mm - Beam height x beam width approx. 400 mm x 1,350 mm - Loading height 550 mm with 150 mm ground clearance 4-Axle Rear Bogie: - Mechanical pin & lug coupling at the front for attaching a lowbed, end cross-member at the rear - Chassis length x width approx. 5,480 mm x 2,850 mm - Extensive lashing positions Pendulum Axle and Tyres (front and rear chassis): - “PENDULUM AXLE”, all axles hydro-mechanically forced steered - Burst protection valve on axle compensation cylinder with automatic reset function - Hydraulic cylinders with shut-off valves and locking pins to secure in lifted position - Final axle coating with 2 coats of 2K paint, single colour in MB 7350 Novagrau - Technical axle load: 12,000 kg - Hydraulic axle balancing - Tyres: 285/70 R19.5 Follow Steering: - Remote steering from front and rear via cable remote control with push buttons, including single-track steering monitoring - Socket on gooseneck for steering control - Cable remote with push buttons and single-track control included Accessories included: - Galvanised connection bar at the front with yellow/red air couplings - Steel front wall approx. 400 mm high - 4 wheel chocks - 3.5" king pin - One 7-pin socket left and right at the rear of the gooseneck for warning panel - A-frame with winch for spare wheel at front end of gooseneck - Truck hydraulic connection with flow regulator (40 l/min), including bracket for supply line suspension; tractor fuel tank must be at least 80 litres, incl. couplers - Detachable ALU side walls and rear board on gooseneck, approx. 400 mm high, anodised - Control lever on gooseneck protected by a foldable cover - Separate air connection with blow gun on gooseneck - BEKAMAX central lubrication system, 1x on gooseneck, 1x on 2-axle bogie, 1x on 4-axle bogie - Variomax tool kit - Multi-coupler hydraulic connections on gooseneck and at lowbed hook bracket - 2 spare wheels - One 7-pin socket left and right, front and rear on rear chassis for warning panel - Front chassis with separate air connection for pneumatic screwdriver - Folding widening extenders with steel panels, width adjustable from approx. 2,850 mm to 3,250 mm Lodjwcmhaopfx Ap Iead - Steel panels can be positioned in two places to create a lowered loading platform - Steel panels with approx. 12 mm rubber floor covering - Threaded bushings (⌀ 40 mm) spaced approx. every 500 mm on the outer flange of the excavator deck for lashing rings - One locking position approx. every 500 mm on the extension with mechanical locking - Socket on rear chassis for cable remote control steering - 2 reversing lights on rear panel - Four warning panels, extendable by approx. 2,000 mm each, approx. 423 x 423 mm, with position light - 1 work lamp left + right on rear panel of gooseneck, separately switchable - Two INOX toolboxes, approx. 855 x 340 x 390 mm - 1-cylinder Hatz diesel engine (Silent Pack) - Radio remote control for follow steering

Stav: nový, maximálna hmotnosť nákladu: 39 720 kg, celková hmotnosť: 50 960 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, You can find our full vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt of features. Complete specifications available on request. Gooseneck * With beveled front corners approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood floor approx. 30 mm thick Loading Platform Loading platform in extendable design * 5 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of flat lashing rings at the front of the loading platform (LC 10,000 daN) * Cutouts in the outer frame of the loading platform for hooking tension belts (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering Landing Legs * JOST (mechanical) with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Axles * BPW axles, two rigid axles and two trailing steering axles, with drum brakes * Air suspension with lifting/lowering function * Trailing steering axle with electro-magnetic reversing lock, can be activated by reverse gear or manually * Tires: 205/65 R 17.5 Brake System * Wabco braking system in accordance with EU regulations with EBS-E (4S3M), without connection lines to the tractor unit Steel Construction * Made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Painting * First-class and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer * High-quality, single-color 2-component (2K) top coat in RAL 3002 Carmine Red * Rear section metallized and finished in RAL 9010 (Pure White) * Rims in silver Standard Accessories * 2-inch king pin * Galvanized steel front wall approx. 400 mm high * Spare wheel holder in front of the front wall * At the galvanized connection rail at the front, yellow-red air couplings * 4 wheel chocks with holder at the front wall * Rear mount for aluminum loading ramps at gooseneck Lodpfx Apeu Sd U Ue Ioad * Galvanized folding supports under the loading platform’s bevel * Holder for a revolving beacon at the rear of the trailer * Yellow reflector tape according to EU regulations on the sides, extension, and rear of the trailer * At the gooseneck and rear panel, left and right, each with a bracket for warning signs including socket * TPMS tire pressure monitoring system according to ECE R 141. Data transmission to the truck is via the standardized EBS interface according to ISO 11992; for correct display, the truck must be able to receive and show this data * On the gooseneck, plug-in aluminum drop sides and rear wall, approx. 2,440 x 400 mm (L x H), the rear galvanized plug-in posts are removable. (Superstructure length approx. 2,560 mm) * Galvanized toolbox, integrated in the beveled gooseneck * 6 pairs of WADER container pockets in the loading area, for 1 x 20' container, 2 x 20' containers, or 1 x 40' container * Adjustable mounting rails for aluminum loading ramps at the rear of the vehicle * 7 pairs of stake pockets for plug-in posts approx. 100 x 50 mm in the outer frame of the loading platform * One galvanized bracket transversely under the loading platform * Extendable galvanized side extensions, approx. 230 mm per side * Lift axle on front axle with control by TEBS E depending on current axle load and loading condition * 5 pairs of recessed lashing rings along the central beam (LC 5,000 daN)...

Stav: nový, pohotovostná hmotnosť: 9 300 kg, maximálna hmotnosť nákladu: 30 100 kg, celková hmotnosť: 39 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 8 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R17.5, Výbava: ABS, Gooseneck: - Gooseneck with rear bevel of approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Extendable loading platform: - Loading platform in extendable design with rear bevel of approx. 1,000 mm x 8° - 5 pairs of foldable external lashing rings (LC 5,000 daN) - 3 pairs of foldable external lashing rings (LC 10,000 daN) - 1 pair of flat lashing rings at the front of the loading platform (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, checker plate covering over the axles Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and tyres: - BPW axles, hydro-mechanically forced-steered - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Axle tools - TPMS tyre pressure monitoring system according to ECE R 141 - Tyres 235/75 R17.5 3PMSF Accessories included: - 2" king pin - One galvanised steel front bulkhead, approx. 400 mm high - Yellow-red air couplings on galvanised supply line at the front - 2 wheel chocks with holder at the front bulkhead - One spare wheel with holder in front of the front bulkhead - Electro-hydraulic power unit - Steering override, operated from front and rear via cable remote control with push buttons, with single-track axle control - European reflector boards (red-yellow) at the rear of the trailer - White reflective tape according to EU regulations on the sides and on the extension, red at the rear - On the gooseneck and at the rear, left and right, each a bracket for warning signs, including socket - Sliding bracket for aluminium approach ramps at the rear of the vehicle - Bracket for a rotating beacon at the rear of the trailer - Galvanised folding supports beneath the rear bevel of the loading platform - One mud flap at the rear of the trailer - Manual and documentation on USB stick - BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and removable protection for the pump - On the gooseneck, plug-in aluminium side and rear walls approx. 2,440 x 400 mm - The rear galvanised plug-in stanchions are removable (body length: approx. 2,560 mm) - 3 pairs of WADER container pockets in the loading platform for 1x 20ft, 1x 30ft or 1x 40ft container - 6 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the loading platform - INOX toolbox 1,500 x 390 x 810 under the loading platform on the right (in direction of travel) - Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm with a position light - Bracket for rotating beacon mounted on the warning signs - Radio remote control for steering override, in addition to cable remote control, with indicator lights on the receiver for single-track control - Anti-slip sand coating painted onto the checker plates on the gooseneck and on the loading platform - 80 km/h speed stickers at the rear and both sides Lodpeyxc Eyofx Ap Isad - Load gauge to determine axle loads, including load diagram

Stav: použitý, maximálna hmotnosť nákladu: 25 750 kg, celková hmotnosť: 36 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 01/2005, celková šírka: 2 550 mm, celková výška: 3 600 mm, Výbava: ABS, Goldhofer 2-nápravový nízkopodlažný náves Laedpsyn Tu Asfx Ap Isd * Gigant nápravy s bubnovými brzdami * Vzduchové odpruženie * Riadené nápravy * Výstražné majáky * Pracovné reflektory * Pneumatiky 235/75 R17,5 Upozornenie: Vozidlo bolo v roku 2025 repasované. Novo nalakované a technika kompletne prepracovaná. Pre ďalšie informácie sme vám k dispozícii.

Stav: nový, maximálna hmotnosť nákladu: 52 810 kg, celková hmotnosť: 63 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, Celú aktuálnu skladovú ponuku vozidiel, ktoré sú okamžite alebo v krátkom čase k dispozícii, nájdete na našej webovej stránke. Výpis zo základnej výbavy. Kompletný zoznam výbavy na požiadanie. Nakladacia plocha: * Nakladacia plocha s cca 30 mm hrubou podlahou z tvrdého dreva * 10 párov vyklápateľných kotviacich ok (LC 10 000 daN) Sedadlové podpery: * Hydraulické sedlové podpery TPMS: * Systém monitorovania tlaku v pneumatikách (TPMS) podľa ECE R 141. Prenos údajov do ťažného vozidla prebieha cez štandardizované EBS rozhranie podľa ISO 11992. Pre správne zobrazenie musí byť ťažné vozidlo schopné tieto údaje prenášať a zobrazovať. Nápravy a pruženie: * BPW nápravy, technická nosnosť na nápravu 12 000 kg, prvá náprava pevná, ostatné nápravy hydro-mechanicky nútene riadené, namontované na otočnom čape * Vzduchové odpruženie so zdvíhacím a spúšťacím ventilom * Sada náradia na nápravy Lodjxttc Aspfx Ap Ijad Obutie: * Pneumatiky 445/65 R 22.5 169 K Elektrická inštalácia: * Elektrická inštalácia v súlade s predpismi EÚ, osvetlenie 24 V ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX na pripojovacej lište vpredu so zásuvkami 24N, 24S a 15-pin * Zapojenie podľa ISO noriem: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Brzdový systém: * Brzdový systém Wabco podľa predpisov EÚ s EBS-E (4S3M), bez prepojovacích liniek na ťažné vozidlo Oceľová konštrukcia: * Oceľová konštrukcia z vysokopevných jemnozrnných ocelí * Kvalita ocele: S355J2+N/S355MC (medza klzu 355 MPa), S690QL/S700MC (medza klzu 690 MPa) Lakovanie: * Celá oceľová konštrukcia automaticky otryskaná v turbínovom zariadení po zváraní * Druhé tryskanie korundom pre optimálnu priľnavosť náterového systému * Finálne lakovanie 2 vrstvami dvojzložkového vrchného laku, jednoliato v RAL 1007 narcísovo žltá podľa RAL systému 841GL * Zadná časť metalizovaná a nalakovaná v RAL 9010 (čisto biela) * Disky kolies striebornošedé * Systém vrstiev testovaný v koróznom (soľná hmla) teste podľa ISO 9227-NSS * Dutiny uzavreté špeciálnym voskom Vrátane príslušenstva: * Nakladacia plocha s cca 30 mm hrubou podlahou z tvrdého dreva * 2-palcový kráľovský čap * Pozinkovaná oceľová predná stena (EN12642-XL), výška cca 1 200 mm * Na pozinkovanej prednej prípojkovej lište žlto-červené vzduchové spojky * Na husím krku a zadnej časti vľavo aj vpravo vždy držiak na výstražné tabule vrátane zásuvky * Nútené riadenie náprav spredu aj zozadu cez káblové diaľkové ovládanie s ovládacími tlačidlami, s kontrolou súosovosti náprav (bez inštalácie na ťažnom vozidle) * Elektro-hydraulická jednotka * 12 párov vreciek na stĺpiky (steckrungen) cca 100 x 50 mm vo vonkajšom ráme nakladacej plochy * Tlakomer náprav na určovanie zaťaženia náprav vrátane diagramu zaťaženia * Zdvihateľná predná náprava s ovládaním cez TEBS E * 5 párov priečnych líšt na stĺpiky cca 100 x 50 mm * 1 nerezová skrinka na náradie INOX 1 200 x 460 x 550 mm vpredu pod nákladnou plochou v smere jazdy vľavo * 1 manévrovacia spojka s vystužením priskrutkovaná na koncovej priečke * Centrálne mazacie zariadenie BEKAMAX (Pico) s bežným mazivom NLGI-2 a odnímateľným krytom čerpadla * 2 LED cúvacie svetlá namontované na zadnom plechu * HRM-metalizácia celého podvozku vozidla pomocou ZINACOR 850 (85 % zinok, 15 % hliník)