Pracovná plošinová náves

FAYMONVILLE MAX Trailer MAX410 Ballastauflieger

Stav: nový, pohotovostná hmotnosť: 22 700 kg, maximálna hmotnosť nákladu: 79 300 kg, celková hmotnosť: 102 000 kg, konfigurácia náprav: > 3 nápravy, dĺžka ložného priestoru: 11 000 mm, šírka ložného priestoru: 2 850 mm, výška ložného priestoru: 920 mm, veľkosť pneumatiky: 245/70 R 17.5, farba: sivý, prevádzková hmotnosť: 22 700 kg, Výbava: ABS, Swan neck: - Swan neck in SNT design for optimizing the loading platform length, approx. 3,750 mm long, with rear chamfer approx. 850 mm x 10° Lhodpfx Agok Af Svsxsl - Hydraulically raisable and lowerable, lifting stroke ± 250 mm including hydraulic connection linked to the hydraulic axle compensation of the first two axles - Open at the rear third - Suitable for tractor units: 6 x 4 and 8 x 4 Loading platform: - Extendable loading platform, approx. 11,000 mm long with rear chamfer approx. 500 mm x 10°. - Recess in the loading platform including in the bevel for accommodating the excavator bucket arm, approx. 4,240 x 900 x 440 mm - Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the respective platform length Ramps: - Pair of two-part steel ramps, approx. 4,650 mm long and 900 mm wide - Hydraulically foldable ramp tips - Ramps hydraulically adjustable sideways approx. 235 mm outward and approx. 215 mm inward, individually - "Super Grip" rubber surface 25 mm and steel plate approx. 5 mm as additional reinforcement on the loading platform bevel - Rectangular climbing strips 20x30 mm, approx. every 200 mm on the outer ramp frame Axles, suspension and tyres: - PA-X axle system, all axles force-steered hydro-mechanically - Steering behavior of the first two axles can be optimally adjusted to the loading platform length, both mechanically and hydraulically - Hose rupture valve on the axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pins for securing in raised position - 245/70 R 17.5 3PMSF Accessories included: - Removable steel front wall, approx. 400 mm high - Supply line connection strip for tractor unit, mounted at the height of the outer frame profile - 1 spare wheel - Outer beams of the swan neck with mounting holes for screwable lashing rings - First hole approx. 200 mm from front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - Tread plate covering over the swan neck - On the swan neck, 1 pair of removable ALU side walls, approx. 400 mm high, anodized - Removable ALU rear wall on the swan neck, approx. 400 mm high, anodized - 3.5" king pin / 2" king pin mounted - Guide plate on the swan neck for the fifth wheel, approx. 500 mm wide - 4 wheel chocks - 4 axle load gauges - Mechanical drop supports at the front - 1-piece INOX toolbox, approx. 2,480 x 340 x 390 mm - Mechanical drop supports at the front - Continuous steel plate covering on the loading platform with painted-on sand layer as slip protection - 1 intermediate table, approx. 500 mm wide, for extension, with elongated holes for insertable and repositionable bridging elements - Painted-on sand coating on the support surfaces of the intermediate table - Mechanical lock for locking the intermediate table when extended - 8 pairs of stake pockets in the outer frame - Extendable galvanized widening sections, approx. 230 mm per side - 1 pair of hydraulic rear supports - Central lubrication system - 1 reversing spotlight each on the left and right at the rear of the vehicle - 3 kW electric-hydraulic power unit - Loose widening planks in reinforced steel U-profile frame - Radio and cable remote control - 4 warning signs, approx. 423 x 423 mm

Stav: použitý, Rok výroby: 1999, Užitočné zaťaženie: 19 990 kg Lhedpfoutw I Nox Agxol Celková povolená hmotnosť: 8 010 kg Stav pneumatík vpredu: 70 % Stav pneumatík vzadu: 70 % Pneumatiky vpredu: 245/70 R 17.5 Pneumatiky vzadu: 245/70 R 17.5 Pre viac informácií kontaktujte spoločnosť PFEIFER GROUP.

Stav: veľmi dobrý (použitý), najazdené kilometre: 3 647 km, výkon: 375 kW (509,86 k), prvá registrácia: 10/2024, typ paliva: nafta, veľkosť pneumatiky: 385/65/22.5, konfigurácia náprav: 8x4, palivo: nafta, brzdy: brzdenie motorom, farba: sivý, kabína vodiča: spacia kabína, typ prevodu: automatický, počet prevodových stupňov: 12, emisná trieda: Euro 6, zavesenie: iný, povolené zaťaženie nápravy (náprava 1): 9 000 kg, dovolené zaťaženie nápravy (náprava 2): 9 000 kg, povolené zaťaženie nápravy (náprava 3): 11 500 kg, Rok výroby: 2024, Výbava: ABS, AdBlue, centrálne zamykanie, elektricky nastaviteľné zrkadlo, elektrické ovládanie okien, hmlové svetlá, klimatizácia, nezávislé kúrenie, prípojné zariadenie, sadzový filter, tempomat, uzávierka diferenciálu, žeriav, = Other options and equipment = - Power brake booster - High beam headlights - Speed limiter - Refrigerator - Air suspension - Particulate filter - Sun visor - Auxiliary heater - Power take-off (PTO) - Central lubrication - Towing hitch = Further information = Transmission Gearbox: I-SHIFT, 12-speed, automatic Axle configuration Brakes: Disc brakes Front axle 1: Tire size: 385/65/22.5; Max. axle load: 9,000 kg; Steered; Suspension: leaf spring Front axle 2: Tire size: 385/65/22.5; Max. axle load: 9,000 kg; Steered; Suspension: leaf spring Rear axle 1: Tire size: 315/80/22.5; Twin tires; Differential lock; Max. axle load: 11,500 kg; Suspension: air suspension Rear axle 2: Tire size: 315/80/22.5; Twin tires; Differential lock; Max. axle load: 11,500 kg; Suspension: air suspension Weights Curb weight: 31,780 kg Payload: 12,220 kg gross vehicle weight (GVW): 41,000 kg Functionality Mast: Telescopic Mast length: 35 m Lifting capacity: 25,000 kg Lifting height: 3,500 cm Crane: FASSI F1450R.2.8-HXP + JIB L826 + WINCH, year of manufacture 2025, mounted behind the cab Body brand: FASSI F1450R.2.8-HXP + JIB L826 + WINCH CE certification: yes Condition Technical condition: very good Ledpfx Agoyiunyoxohl Visual condition: very good VOLVO FH 500 8X4 WITH FASSI F1450R.2.8-HXP + JIB L826 + WINCH EURO 6 | PACKAGE | 500 HP DRIVELINE 8X4 WHEELBASE 490 CM AIR SUSPENSION FH SLEEPER CAB WITH AIR CONDITIONING AND REFRIGERATOR I-SHIFT AUTOMATIC TRAILER COUPLING TOOL BOXES FASSI F1450R.2.8-HXP + JIB L826 + WINCH 2X OIL COOLERS FOR CRANE HYDRAULICS 14X HYDRAULIC EXTENSIONS TOTAL WORKING HEIGHT 35 METERS!!! MAX. LIFTING CAPACITY AT 4.30M = 25,000 KG MAX. LIFTING CAPACITY AT 31.5 METERS 1,465 KG CRANE CAN OPERATE IN FRONT OF THE CAB THANKS TO 2X FRONT OUTRIGGERS 100% EXTRA CHASSIS REINFORCEMENT A TOTAL OF 6X OUTRIGGERS LARGE HYDRAULIC WINCH WITH ATTACHMENTS, HOOKS AND PULLEYS X-RAY INSPECTION OPEN CARGO AREA L = 415 CM W = 247 CM AVAILABLE IMMEDIATELY!!! FOLLOW US ON INSTAGRAM, FACEBOOK, AND TIKTOK TO SEE VIDEOS OF OUR TRUCKS AND MACHINERY. WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL MÓWIMY PO POLSKU РОЗМОВЛЯЄМО УКРАЇНСЬКОЮ

Stav: použitý, Rok výroby: 2024, farba: sivo-čierny, pohotovostná hmotnosť: 2 kg, typ paliva: benzín, typ prevodu: mechanický, NÁZOV: NOVÝ PLATÓVÝ KONTAJNER S DVOMA BOČNÝMI BORTAMI NA KAŽDEJ STRANE V TR5 A ZADNOU BORTOU S DVOJITÝM ÚČINKOM (OTVÁRANIE AJ SKLÁPANIE), PRIESTOROM PRE ŽERIAV A PODLAHOU PODOPRETOU NA NOSNÍKOCH 200 MM, 2 PREDNÉ HYDRAULICKÉ PIŠTÓNY NA BLOKOVANIE. REFERENCIA: 24-N-41 TYP: plató s bočnými burtami v TR5 C NOVÝ: áno KRYT: nie OTVÁRANIE: zadné a bočné 2+2 ROZMERY CELKOVÁ VONKAJŠIA DĹŽKA: 5,20 m VONKAJŠIA ŠÍRKA KORBY: 2,55 m PREDNÁ BORTA: 1,60 m + 0,10 m rohy ZADNÁ BORTA: 0,80 m BOČNÉ BORTY: 0,80 m OBJEM: 8 m³ PODLAHA: 5 mm STENA: v TR5 FARBA: sivá Ceny sú uvedené bez DPH. Pre aktuálnu cenovú ponuku a podmienky kontaktujte obchodného zástupcu. Pre viac informácií: Loris: 3484773001 URL: #glispecialistidelloscarrabile Lhjdpfxev Aqa Us Agxel SCARRABILI AURORA pôsobí v oblasti predaja a nákupu úžitkových a priemyselných vozidiel, špecializovaných hlavne na odpadový sektor. Špecialisti na nákladné autá, prívesy a výmenné nadstavby. Ponúkame viac než 50 áut a 150 kontajnerov (s výmenným systémom, s alebo bez žeriavu) k okamžitému odberu. Vzhľadom na počet inzerátov a podrobností vás Aurora žiada, aby ste si správnosť uvedených údajov overili s naším obchodným tímom.

Stav: nový, celková hmotnosť: 58 000 kg, Rok výroby: 2026, Low-bed Semi-Trailer MAX100 4 A 8.60 U Technical Data Maximum speed: 80 km/h Gross weight: 60,800 kg Fifth wheel load: 18,000 kg Axle load: 42,800 kg Unladen weight: Payload: Gooseneck length: 3,850 mm Loaded coupling height: 1,250 mm Loading area length: 8,600 mm Extendable by: 5,400 mm Axle spacing: 1,360 mm Rear steering radius: 2,300 mm Loading height at max. load: 860 mm Overall width: 2,540 mm Suspension travel: -55 / +145 mm Technical Description Gooseneck: With front corners chamfered at 45°, rear taper approx. 760 mm x 10° 3 pairs of lashing rings (LC 5,000 daN) 30 mm strong hardwood flooring Extendable loading platform Rear taper approx. 1,000 mm x 8° 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000) Approx. 48 mm thick hardwood flooring, over the axles checker plate Ramps: Two-piece steel ramps One pair galvanized two-piece steel ramps approx. 2,750 + 1,400 mm x 800 mm with approx. 48 mm thick hardwood covering Ramp with hydraulically folding ramp sections, hydraulic lifting device, and hydraulically movable Maximum load per pair 40,000 kg Tyres: 235/75 R 17.5 Brake system in accordance with EU regulations with EBS-E (4S3M), without connection lines to the tractor unit Paintwork: Premium, durable corrosion protection of the standard shot-blasted welded frame ensured by two-component zinc-rich primer High-quality two-component (2K) topcoat, single color, in RAL color of your choice Rear section metalized and painted in RAL 9010 (Pure White) Landing Legs: JOST mechanical landing legs with 2-speed gearbox, rated for 24t lifting capacity (50t test load) Steel Construction: High-strength fine grain steel construction. Steel grades: High-strength fine grain steel S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system in accordance with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets, ISO compliant 24N IS0-1185 Lsdjg Sk T Depfx Agxehl 24S IS0-3731 15 pin IS0-12098 Included Accessories: One galvanized steel front wall approx. 400 mm high 2" king pin 4 wheel chocks with holder at the front wall Bracket for a revolving beacon at the rear of the trailer SAF axles, two rigid, one trailing-steered, air suspension, drum brakes, with lift/lower function Trailing steering axle with electro-magnetic reverse lockout activated via reverse gear or manually Axle tools Mount at the rear of the gooseneck for ALU approach ramps Galvanized folding supports under the loading platform’s taper Mechanical locking of the loading platform One spare wheel with holder in front of the front wall Yellow reflective tape according to EU regulations on the sides, extension, and rear of the trailer Yellow-red air couplings on galvanized terminal strip at the front At the gooseneck and rear plate, left and right, each a bracket for warning plates including socket One mudflap at the rear of the trailer Manual and documentation Plug-in ALU side walls and end wall approx. 2,440 x 400 mm (L x H) for the gooseneck Rear removable galvanized stakes Superstructure length approx. 2,560 mm, +/- 46 kg 3 pairs of WADER container pockets in the loading platform for one 20', 30’, or 40’ container (± 30 kg) 6 pairs of stake pockets for plug-in stakes

Stav: nový, pohotovostná hmotnosť: 11 000 kg, maximálna hmotnosť nákladu: 27 000 kg, celková hmotnosť: 38 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 300 mm, šírka ložného priestoru: 2 550 mm, veľkosť pneumatiky: 235/75 R17.5, farba: sivý, prevádzková hmotnosť: 11 000 kg, Výbava: ABS, Chassis: - Welded steel frame construction with front and rear frame cranking and lowbed without rear bevel - Gooseneck + king pin plate 225 mm - Lowbed designed for point load of 25 t over 5 m - Outer frame closed to the outside with welded lashing rings for securing cargo - Interchangeable 2" king pin - Rear hanging track for aluminum ramps Axles and Tyres: - BPW low loader axles, each with 10 t axle load, air bellows diameter 360 mm - Air suspension with lifting and lowering device, lift 220 mm (-60/+160 mm) - Wabco SmartBoard with ECAS function for 2 coupling heights + 100 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - IVTM tire pressure monitoring system - 9 tires 235/75 R 17.5, tubeless Steering: - 1st and 2nd axle hydraulically forced steering via fifth wheel coupling Floor: - Laminated multi-layer floor, 27 mm thick, flush with outer frame and longitudinal beams - Reinforced underneath with GRP coating - 12 pairs of lashing rings welded into the outer frame (8 pairs RUD 8 t – 6 pairs in the lowbed as well as one pair each on the gooseneck and at the start of the rear compartment – 2 pairs each of 4 t lashing rings on the gooseneck and rear compartment) - 6 pairs of mushroom lashing points in the outer frame lowbed - Storage compartment with lid in the lowbed floor front left and right Front Wall: - 25 mm aluminum hollow profiles extended up to the lower roof edge with integrated curtain tensioning device Curtain Sides: - Curtains on both sides with welded-in vertical and horizontal straps (spacing approx. 600 mm) and tension locks made of stainless steel - Adjustable curtain straps (over-center type) for loading width up to 4,000 mm including curtain extension with press studs and Velcro fastener - Curtain extension to the driving direction: 300 mm, in height: 750 mm - With eyelets for loose curtain extension part - 1 pair of vertical curtain pockets approx. 1,000 mm long, positioned in the lowbed at the front cranking - With strap pockets Rear Wall: - Steel tail portal frame with side curtain retaining bracket - Aluminum double-wing door, 25 mm thick - Both door wings fully folding with door retainers - Each door wing with one double hinge and two recessed grip pockets Front Corner Posts: - At roof height, bolted to the front end Center Posts: - 3 pairs of infinitely adjustable folding posts - Posts are movable along the entire length by means of rollers - Center posts in lowbed also fixable at the rear platform Roof: - EDSCHA sliding roof (galvanized) with transverse bows, can be shifted in both directions (pushed together at the front in the load area) - Rear portal crossbar can be swivelled away - PVC tarpaulin roof without customs closure - Manual hydraulic lifting roof on both sides, lift 450 mm - Retractable roof can be operated in front (9x50) and rear (9x50) raised positions - Including curtain extension and curtain tail at the rear - Roof canopy at the very front of the front wall, each extendable by 900 mm with crank Lodpfxsiu Eu Nj Agxshl Accessories: - Extensible warning signs (removable at front and rear with socket), incl. position lights up to loading width of 4,000 mm - Storage for 4 warning signs inside front wall, top right and left - 1 aluminum ladder with holder, 2,500 mm long, at the front wall - 2 rows of self-locking aluminum slats - Sheet metal fenders with mud flaps - 1 night parking sign and 1 ADR sign on the rear wall - Central lubrication system BEKAMAX with pump and grease

Stav: veľmi dobrý (použitý), konfigurácia náprav: 3 nápravy, prvá registrácia: 07/2016, zavesenie: vzduch, Rok výroby: 2016, Výbava: zdvíhacie čelo, Odpruženie: vzduchové odpruženie Ljdjvvwzropfx Agxehl Zadná náprava 1: riadená Zadná náprava 2: riadená Zadná náprava 3: riadená Celková hmotnosť: 48 000 kg Technický stav: veľmi dobrý Vizuálny stav: veľmi dobrý Cena: na vyžiadanie Pre viac informácií kontaktujte Davida F. Middelmana.

Stav: použitý, najazdené kilometre: 108 000 km, výkon: 360 kW (489,46 k), prvá registrácia: 06/2015, brzdy: retardér, farba: čierny, emisná trieda: Euro 6, Rok výroby: 2015, prevádzkové hodiny: 6 224 h, Výbava: retardér, = Ďalšie možnosti a príslušenstvo = - Intarder Lhjdpfx Agoy N T Tvsxol = Ďalšie informácie = Prázdna hmotnosť: 24 800 kg Užitočné zaťaženie: 14 200 kg Celková hmotnosť: 39 000 kg Značka nadstavby: HMF 8520-K6 FJ2000-K6 CE označenie: áno

Stav: nový, pohotovostná hmotnosť: 15 420 kg, maximálna hmotnosť nákladu: 61 080 kg, celková hmotnosť: 76 500 kg, konfigurácia náprav: > 3 nápravy, dĺžka ložného priestoru: 8 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 900 mm, veľkosť pneumatiky: 235/75/r17,5, farba: sivý, Výbava: ABS, Gooseneck: Gooseneck with rear bevel of approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading Area: Extendable loading area with rear bevel of approx. 500 mm x 8° 8 pairs of folding outward lashing rings 1 pair of flat lashing rings at the front of the loading area Cutouts in the outer frame of the loading area for securing load straps Approx. 48 mm thick hardwood flooring, non-slip checker plate cover above the axles Two-piece Steel Ramps: One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering. Ramp parts are hydraulically foldable, equipped with hydraulic lifting mechanism and hydraulic lateral adjustment. Maximum load per pair: 50,000 kg. Landing Legs: • JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: BPW axles and suspension, 4th and 5th axle steering Technical axle load: 12,000 kg 4th and 5th axles with electromagnetic reverse lock activated via reverse gear and manual operation Tyres 235/75 R 17.5 3PMSF Braking System: Braking system according to EU regulations with EBS-E (4S3M) Sockets and Lighting: Electrical system according to EU regulations, 24-volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets Connections according to ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paintwork: First-class and durable corrosion protection, achieved by standard shot-blasted welded frame with a 2-component (2K) zinc dust primer High-quality single color 2-component (2K) topcoat in MB 7350 Novagrau Rear section metallized and painted in RAL 9010 (Pure White) Metallic lacquer not available Steel Structure: Steel construction made from high-strength fine-grained steels Steel grades: Ljdpjl Sl Izefx Agxehl S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Accessories: One spare wheel with bracket in front of the bulkhead 2" kingpin Galvanized steel front wall approx. 400 mm high Yellow-red air couplings on the galvanized front connector strip 2 wheel chocks with holders on the front wall Provision at the rear of the gooseneck for ALU drive-on ramps Bracket for a beacon at the rear of the trailer Galvanized supports under the rear bevel of the loading area White reflector tape according to EU regulations on the sides, at the extension and rear red Electro-hydraulic unit at the rear under the loading area On gooseneck and rear panel (left and right) bracket for warning signs incl. socket Control valves for the ramps installed on the right side of the trailer A mud flap at the rear of the trailer Manual and description on USB stick 3.5" kingpin supplied loose On the gooseneck, plug-in ALU side walls and rear wall approx. 2,440 x 400 mm (LxH) Rear galvanized plug-in stakes are removable (Length of the structure approx. 2,560 mm) 3 pairs of WADER container pockets on the loading area for one 20' (30') or a 40' container 6 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading area Galvanized extensions, extendable by approx. 230 mm per side Lifting axle on the front axle, control via TEBS-E depending on current axle load and loading status Square climb strips 20 x 20 mm, every 200 mm on the outer frame of the loading area bevel On the checker plates, above the kingpin and the loa

Stav: nový, maximálna hmotnosť nákladu: 36 156 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, MAX200-N-3A-13.60-19.5-2.54 Technical Data Speed: 80 km/h Gross vehicle weight: 45,000 kg Fifth-wheel load: 18,000 kg Lodpfxog Sk Tve Agxehl Axle load: 27,000 kg Unladen weight (+/- 3%): 8,844 kg Payload approx.: 36,156 kg Loading platform length: 13,600 mm Loaded saddle height: 950 -> 1,050 mm Rear overhang radius: 2,300 mm Extendable by: 3,400 mm Axle spacing: 1,360 / 1,405 mm Overall width: 2,540 mm Technical Description Loading Platform: Extendable loading platform with pneumatically operated locking. 2 pairs of lashing rings (LC 5,000 daN). 1 pair of lashing rings (LC 10,000 daN). 6 pairs of fold-out lashing rings (LC 5,000 daN). 2 pairs of fold-out lashing rings (LC 10,000 daN). Cut-outs in the outer frame of the loading platform for attaching lashing straps. (LC 2,000 daN) Landing Gear: JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (test load: 50t). Axles: SAF axles: SAF CD axles, air suspension, disc brakes (377 mm), lifting/lowering function. (ET 120). Trailing steering axles with electro-magnetic reverse lock, can be activated via reverse gear or manually. Axle tools. (± 80kg) Brake System: Brake system according to EU regulations with EBS-E (2S2M), without connection lines to the tractor unit. Steel Construction: Frame made of high-strength fine-grained steels. Steel grades: S355J2+N / S355MC (yield strength 355MPa) S690QL / S700MC (yield strength 690MPa) Painting: First-class and durable corrosion protection of the standard shot-blasted welded frame ensured by a 2-component (2K) zinc dust primer. High-quality single-colour 2-component (2K) top coat, in a RAL colour of your choice. Rear section metallized and painted RAL 9010 (pure white). No metallic paint possible. Electrical Equipment: Electrical system in accordance with EU regulations, LED lighting 24V ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets. Wiring according to ISO: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Included Accessories: At the galvanized front connection strip yellow-red air couplings. 2 wheel chocks with holder. 2" kingpin Galvanized steel headboard approx. 2,200 mm high (± 105kg) EN12642-XL. Yellow reflector tape according to EU regulations at sides, extension, and rear of trailer. European reflector plates (red-yellow) at rear of trailer. Loading platform with approx. 38 mm thick hardwood floor (± 320kg). 10 pairs of socket pockets for 100 x 50 mm drop-in stakes in the outer frame (± 30kg). 1 spare wheel holder under the cargo bed, right-hand side. Tyres 435/50 R 19.5, manufacturer’s choice. One mudflap at the rear of the trailer. Manual and description on USB stick. Bracket for rotating beacon at rear. Mountings for warning signs with socket at gooseneck and rear panel, left and right. One INOX toolbox crosswise under the loading platform (1,000 x 400 x 2,500 mm) (± 135kg). 6 pairs WADER container pockets on the loading area, for 1x20' container, 2 x 20' containers, or 1 x 40' container. Extension with an additional locking point for a 45' container. (± 90kg) 4 pairs WADER container locks (± 60kg). 10 pairs zinc-plated drop-in stakes approx. 100 x 50 mm, 1,000 mm high (± 220kg). 3 pairs stake pocket bars, mounted crosswise in the loading platform for 100 x 50 mm drop-in stakes (± 95kg). Storage for 1,000 mm drop-in stakes (± 45kg). 1 spare wheel 435/50.