Schwarzmüller G404 4 Achs-40To kúpiť použité (41 242)

Stav: nový, pohotovostná hmotnosť: 15 550 kg, maximálna hmotnosť nákladu: 47 450 kg, celková hmotnosť: 63 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 800 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck in SNT design for optimizing loading area length, approx. 3,700 mm long - Rear gooseneck with approx. 1,000 mm x 10° bevel Loading Area: - Extendable loading area, approx. 8,800 mm in length, with an approx. 500 mm x 10° bevel at the rear - A recess in the loading area and the bevel, designed to accommodate the excavator stick - Pneumatic locking with conical locking bolts and reinforced locking positions - Hardwood decking on the beveled section of the loading area Ramps: - 1 pair of two-part steel ramps, approx. 4,350 mm long and 900 mm wide - Ramps with hardwood decking - Hydraulically foldable ramp ends - Each ramp hydraulically adjustable outwards by approx. 235 mm and inwards by approx. 215 mm - Square climbing bars 20 x 30 mm, positioned approx. every 200 mm on the outer frame of the ramp Axles and Suspension: - BPW axles and suspension, 1st axle steering ahead, all other axles hydromechanically forced steered - Technical axle load: 12,000 kg - 1st axle with electromagnetic reverse lock, activated via reverse gear and also manually - Air suspension with lift and lower valve - Twin tires 235/75 R 17.5 - TPMS tire pressure monitoring system according to ECE R141 - TPMS sensors mounted on all wheels including spare wheels Accessories included: - Plug-in steel front wall, approx. 400 mm high Gijdpok Aht Ujfx Ap Dju - 3kW electro-hydraulic power unit for hydraulic operations, excluding hydraulic winches - Parking location on the gooseneck for warning panels when not in use - 1 spare wheel - On the gooseneck: 1 pair of plug-in anodized ALU side boards, approx. 400 mm high - Plug-in anodized ALU rear board on the gooseneck, approx. 400 mm high - On the gooseneck: approx. 40 mm thick hardwood decking, over the kingpin tread plate covering - 2" kingpin - Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide - 4 wheel chocks - Mechanical landing gear with 2-speed gearbox and crank - JOST Modul B – static test load = 50,000 kg - 1 intermediate table, approx. 300 mm wide - Extendable galvanised outriggers, approx. 230 mm per side - Wheel recesses with square climbing bars - ALU covers for the wheel recesses - 1 pair of mechanical rear supports - Remote steering system operable from the front and rear via cable remote control, with single-track control for axles - 1st axle with automatic lift axle function - Central lubrication system with 1 pump, brand BEKAMAX - Radio remote control for rear steering, additional to the cable remote, with 2 indicator lights on receiver for single-track control - Wabco Smart Board System - 4 warning panels, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and brackets for rotating beacon

Stav: nový, pohotovostná hmotnosť: 29 600 kg, maximálna hmotnosť nákladu: 72 400 kg, celková hmotnosť: 102 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 6 650 mm, šírka ložného priestoru: 2 840 mm, výška ložného priestoru: 550 mm, veľkosť pneumatiky: 285/70 R19.5, farba: sivý, prevádzková hmotnosť: 29 600 kg, Výbava: ABS, Gooseneck: - Hydraulically liftable/lowerable and detachable gooseneck - Length approx. 3,650 mm - For tractor units: 6 x 4 or 8 x 4 2-Axle Front Bogie: - Hook couplings front and rear - Chassis length x width approx. 2,200 mm x 2,850 mm Excavator Deck “BB-A”: - Telescopic excavator deck “BB-A” with drive-over deck hooks at the front and pin & lug coupling at the rear - Length x base width approx. 6,650 mm x 2,850 mm - Beam height x beam width approx. 400 mm x 1,350 mm - Loading height 550 mm with 150 mm ground clearance 4-Axle Rear Bogie: - Mechanical pin & lug coupling at the front for attaching a lowbed, end cross-member at the rear - Chassis length x width approx. 5,480 mm x 2,850 mm - Extensive lashing positions Pendulum Axle and Tyres (front and rear chassis): - “PENDULUM AXLE”, all axles hydro-mechanically forced steered - Burst protection valve on axle compensation cylinder with automatic reset function - Hydraulic cylinders with shut-off valves and locking pins to secure in lifted position - Final axle coating with 2 coats of 2K paint, single colour in MB 7350 Novagrau - Technical axle load: 12,000 kg - Hydraulic axle balancing - Tyres: 285/70 R19.5 Follow Steering: - Remote steering from front and rear via cable remote control with push buttons, including single-track steering monitoring - Socket on gooseneck for steering control - Cable remote with push buttons and single-track control included Accessories included: - Galvanised connection bar at the front with yellow/red air couplings - Steel front wall approx. 400 mm high - 4 wheel chocks - 3.5" king pin - One 7-pin socket left and right at the rear of the gooseneck for warning panel - A-frame with winch for spare wheel at front end of gooseneck - Truck hydraulic connection with flow regulator (40 l/min), including bracket for supply line suspension; tractor fuel tank must be at least 80 litres, incl. couplers - Detachable ALU side walls and rear board on gooseneck, approx. 400 mm high, anodised - Control lever on gooseneck protected by a foldable cover - Separate air connection with blow gun on gooseneck - BEKAMAX central lubrication system, 1x on gooseneck, 1x on 2-axle bogie, 1x on 4-axle bogie - Variomax tool kit - Multi-coupler hydraulic connections on gooseneck and at lowbed hook bracket - 2 spare wheels - One 7-pin socket left and right, front and rear on rear chassis for warning panel - Front chassis with separate air connection for pneumatic screwdriver - Folding widening extenders with steel panels, width adjustable from approx. 2,850 mm to 3,250 mm - Steel panels can be positioned in two places to create a lowered loading platform - Steel panels with approx. 12 mm rubber floor covering - Threaded bushings (⌀ 40 mm) spaced approx. every 500 mm on the outer flange of the excavator deck for lashing rings - One locking position approx. every 500 mm on the extension with mechanical locking - Socket on rear chassis for cable remote control steering - 2 reversing lights on rear panel Giedpjwcmhaefx Ap Dsu - Four warning panels, extendable by approx. 2,000 mm each, approx. 423 x 423 mm, with position light - 1 work lamp left + right on rear panel of gooseneck, separately switchable - Two INOX toolboxes, approx. 855 x 340 x 390 mm - 1-cylinder Hatz diesel engine (Silent Pack) - Radio remote control for follow steering

Stav: nový, pohotovostná hmotnosť: 13 500 kg, maximálna hmotnosť nákladu: 51 500 kg, celková hmotnosť: 69 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 800 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 r17.5, farba: sivý, Výbava: ABS, Gooseneck: Gooseneck in SNT design for optimizing the loading platform length; length approx. 3,700 mm. Gooseneck rear bevel approx. 1,000 mm x 10°. Loading platform: Telescopic loading platform, length approx. 8,800 mm, with rear bevel approx. 500 mm x 10°. Recess in the bevel as well as extending into the loading platform to accommodate the excavator's bucket linkage. Pneumatic locking with conical bolt and reinforced lock positions. Supply lines are protected within the telescopic beam and adapt to the respective platform length. Ramps: 1 pair of two-part steel ramps, approx. 4,350 mm x 900 mm. Hydraulically folding ramp tips. Each ramp can be hydraulically shifted approx. 235 mm outward and approx. 215 mm inward. Axles and suspension: BPW axles and suspension, two rigid axles, two self-steering axles. Electromagnetic reverse lockout, activated via reverse gear and manually. Air suspension with raise/lower valve. Axle tools. Tyres: 235/75 R17.5 3PMSF, dual-mounted. Load index: 143/141J (144/144F). Gsdpfxek Ahugo Ap Dsiu Braking system: WABCO brand braking system, EBS-E, compliant with EU regulations. Lighting system: 24-volt lighting system in "ASPÖCK-NORDIK full LED." Metal finishing: Standard HRM metallization of the outer frame. Complete steel structure shot-blasted, then all defined visible surfaces hot-coated with ZINACOR 850 (zinc 85% - aluminum 15%). Steel structure: Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Welders certified to DIN-EN 287-1. MAG welding method according to EN ISO 4063. Protective gas M21 according to EN ISO 14175. Standard accessories included: Removable front wall, steel, height approx. 400 mm. ASPÖCK-UNIBOX at the front connection strip with 24N, 24S, & 15-pin sockets. 24N connection per ISO-118524S connection per ISO-373115-pin connection per ISO-12098. Round NATO socket at the front connection strip. Power cable for supplying the electro-hydraulic unit and/or electric winch (35 mm², 3.5 m long) between trailer and truck tractor with connector (NATO-NATO). 3 kW electro-hydraulic unit for operating hydraulic functions, except hydraulic winches. 1 spare wheel with mounting adapter. External beam of gooseneck with fixing holes for bolted lashing rings; first hole approx. 200 mm from the front, then every approx. 400 mm. 2 pairs of screw-in lashing rings included. Fixing hole at the upper rear of the gooseneck external beams for a bolted lashing ring. 1 pair of screw-in lashing rings. Approx. 40 mm thick hardwood flooring over the gooseneck. On the gooseneck, 1 pair of removable, anodized aluminum sideboards, approx. 400 mm high. On the gooseneck, 1 removable anodized aluminum rear wall, approx. 400 mm high. 2” king pin. Guide plate on gooseneck for fifth wheel plate, approx. 500 mm wide. 4 wheel chocks with holders. Mount for aluminum approach ramps. Mechanical landing legs with 2-speed gearbox and crank. Approx. 50 mm hardwood floor, continuous on the platform and interrupted between the axles. Platform locking with conically welded locking profiles every 250 mm, including pre-tensioning plate. Long holes at the front of the loading platform for hook-in and relocatable bridging elements. 1 intermediate table with recessed platform, approx. 300 mm wide for the extension tube with large cross-section with steel covering. Front and rear with long holes...

Stav: nový, pohotovostná hmotnosť: 13 250 kg, maximálna hmotnosť nákladu: 47 550 kg, celková hmotnosť: 60 800 kg, konfigurácia náprav: 3 nápravy, zavesenie: vzduch, veľkosť pneumatiky: 245/70 r17.5, farba: sivý, Výbava: ABS, Gooseneck: Gooseneck with rear chamfer of approx. 750 mm x 10°. 3 pairs of lashing rings 30 mm thick hardwood flooring Extendable loading platform: Extendable loading platform with rear chamfer of approx. 1,000 mm x 8° 5 pairs of hinged lashing rings (can be folded outward) 3 pairs of hinged lashing rings (can be folded outward) 1 pair of horizontal lashing rings at the front of the loading platform Cutouts in the outer frame of the loading platform for hooking in tensioning straps Hardwood floor approx. 48 mm thick, anti-slip checker plate over the axles Two-part steel ramps: One pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood overlay. Ramps with hydraulically extendable and retractable ramp sections, hydraulic lifting device, and hydraulically adjustable. Maximum load capacity per pair: 40,000 kg Landing legs: JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test capacity) Axles and tires: BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanical forced steering Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tools Tires: 245/70 R 17.5 Brake system: Brake system compliant with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit Steel construction: Steel construction made of high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Paintwork: Top-quality, durable corrosion protection of the standard shot-blasted welded frame guaranteed by a two-component (2K) zinc-rich primer High-quality single-color 2-component (2K) top coat in Nova Grey Rear section metalized and painted in RAL 9010 (pure white) No metallic paints possible Electrical system: Electrical system according to EU specifications, 24 volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets Connection as per ISO 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Accessories included: 2" kingpin Galvanized steel front wall approx. 400 mm high Yellow-red air couplings on the galvanized connection bar at the front Giedel Uxdkjpfx Ap Deu 4 wheel chocks with holder at the front wall One spare wheel with holder in front of the front wall Electro-hydraulic power pack Remote steering from front and rear via cable remote control with push-button operation and single trace axle control Mount at the rear of the gooseneck for ALU loading ramps European reflective panels (red-yellow) at the rear of the trailer White reflective striping according to EU regulations at the side, at the extension element, and rear in red On the gooseneck and ramps left and right, each with one bracket for warning signs including socket A bracket for a revolving beacon at the rear of the trailer Galvanized folding supports under the chamfer of the loading area Control valves for ramps mounted on the right side of the trailer Cover plates for bridging the gap between ramps and loading area One mudflap at the rear of the trailer Manual and documentation on USB stick Central lubrication system BEKAMAX (Pico) with standard NLGI-2 grease and removable pump guard On the gooseneck, removable ALU side boards and rear board approx. 2,440 x 400 mm Rear galvanized removable stanchions, body length approx. 2,560 mm A toolbox INOX 1,350x400x400 on the gooseneck, box covers oil fill 4 pairs of WADER container locks in the loading platform for one

Stav: nový, maximálna hmotnosť nákladu: 49 000 kg, celková hmotnosť: 60 800 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 r 17.5, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck with chamfered front corners at 45° and rear chamfer of approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable Loading Area: - Extendable loading area with rear chamfer of approx. 1,000 mm x 8° - 5 pairs of fold-out lashing rings on the outside (LC 5,000 daN) - 3 pairs of fold-out lashing rings on the outside (LC 10,000 daN) - 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) - Cut-outs in the external frame of the loading area for attaching tie-down straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, with chequered plate covering over the axles Detachable Two-Part Ramps: - One pair of galvanized, two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood overlay - Ramps with hydraulically folding ramp sections, hydraulic lift and hydraulically adjustable side shift - Max. load per pair: 40,000 kg Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and Tyres: - BPW axles, two rigid axles, two self-steering axles, air-suspended, with drum brakes, lifting/lowering function - The self-steering axles can be locked via electromagnetic reverse lock through reverse gear or manually - Axle tools - Tyres: 235/75 R 17.5 Brake System: - Brake system in accordance with EU regulations with EBS-E (4S3M) Steel Construction: - Steel construction made from high-strength fine-grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Paintwork: - Premium and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc-rich primer - High-quality 2-component (2K) topcoat in single-tone Novagrey Electrical System: - Electrical system according to EU regulations, ASPÖCK-NORDIK (ASS3) 24 Volt lighting - ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets Included Accessories: - 2" king pin - One galvanized steel front wall, approx. 400 mm high - One spare wheel with holder in front of the front wall - Yellow and red air couplings on galvanized front terminal strip - 4 wheel chocks with holder on the front wall - Mounting at the rear of the gooseneck for ALU approach ramps - Galvanized folding supports under the chamfered loading area - Bracket for a rotating beacon - Cover plates to bridge the gap between ramps and loading area - White reflective tape according to EU regulations on the sides, red at the rear and on the extension - Electro-hydraulic power unit - At the gooseneck and on the ramps, left and right, each with mounting for warning panels including socket - Control valves for the ramps mounted on the right side of the semi-trailer - Mudflap at the rear of the trailer - User manual and description on USB stick Gisdpfxeh Etf Rj Ap Dju - Removable ALU side boards and rear panel on the gooseneck, approx. 2,440 x 400 mm - Rear galvanized stanchions removable (body length approx. 2,560 mm) - 4 pairs of WADER container pockets in the loading area for a 20 ft, 2x 20 ft or a 40 ft container - 7 pairs of stake pockets for 100 x 50 mm stakes in the external frame of the loading area - Extensions, galvanized, retractable by approx. 230 mm per side - Lift axle on the front axle with control - 20 x 20 mm square climbing strips - BEKAMAX central lubrication system - Four warning panels extendable by approx. 400 mm (approx. 423 x 423 mm)

Stav: nový, maximálna hmotnosť nákladu: 38 100 kg, celková hmotnosť: 50 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 100 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 760 mm, zavesenie: vzduch, veľkosť pneumatiky: 205/65 R17.5 3PMSF, farba: sivý, Výbava: ABS, Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading platform: 5 pairs of folding lashing rings on the outside 3 pairs of folding lashing rings on the outside 1 pair of horizontal lashing rings at the front of the loading platform Cutouts in the outer frame of the loading platform for attaching tie-down straps Approx. 48 mm thick hardwood flooring, over the axles with checker plate covering Landing gear: JOST landing legs with 2-speed gearbox for 24 t lifting capacity Axles and tyres: BPW axles, two fixed and two self-steering axles, air suspension, drum brakes, with raise/lower function The self-steering axles can be locked for reversing via electromagnet, activated through reverse gear or manually Axle tools Tyres 205/65 R17.5 3PMSF Braking system: WABCO braking system according to EU regulations with EBS-E Steel construction: High-strength fine grain steel frame Steel grades: S355J2+N/S355MC S690QL/S700MC Electrical equipment: Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets Gedpetphtmofx Ap Dsiu Connection in accordance with ISO Paintwork: Premium, durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component zinc dust primer High-quality 2-component top coat, single color in MB 7350 Novagrau Metallic paint not available Rear section metallized and painted in RAL 9010 Standard equipment included: 1 spare wheel 205/65 R 17.5 TPMS tire pressure monitoring system in accordance with ECE R 141 At the galvanized front connection strip: yellow-red air couplings 4 wheel chocks with brackets on the front wall Mounting at the rear of the gooseneck for ALU loading ramps Galvanized folding supports underneath the sloped section of the loading area One bracket for a rotating beacon at the rear of the trailer Height-adjustable curtain structure Galvanized front wall with a tensioning mechanism for the sliding curtains Adjustable height approx. 400 mm "EDSCHA" brand roof, forward-sliding on ALU roof beam profiles, bolted to front and rear walls 3 pairs of sliding stanchions on the loading area The superstructure can be hydraulically extended at the rear left and right by approx. 750 mm Sliding roof with lift-up portal beam Sliding curtain with 700 mm extra length, with tensioning straps approx. every 600 mm Height to top edge of superstructure approx. 3,960 mm Driving with open sliding roof is not permitted and will cause damage to the curtain Hanger bar for ALU loading ramps at the rear of the vehicle On the gooseneck and on the left and right of the rear panel, each with a bracket for warning signs including socket Mudflap at the rear of the trailer European reflective plates at the rear of the trailer 7 pairs of stake pockets for 100 x 50 mm insertable stakes in the outer frame of the loading platform Lifting axle on the front axle controlled by TEBS E depending on current axle load and loading condition Superstructure at the rear with closed ALU swing doors On the checker plate on the gooseneck and loading area, an integrated sand coating to prevent slipping Central lubrication system BEKAMAX with standard grease NLGI-2 and removable pump guard 80 km/h speed stickers at the rear and on both sides Load gauge for axle load determination including load diagram

Stav: nový, pohotovostná hmotnosť: 10 600 kg, maximálna hmotnosť nákladu: 39 400 kg, celková hmotnosť: 50 960 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 760 mm, zavesenie: vzduch, veľkosť pneumatiky: 205/65 R17.5, farba: sivý, prevádzková hmotnosť: 10 600 kg, Výbava: ABS, Gooseneck: - Gooseneck with 30 mm hardwood floor - Gooseneck in straight design at the rear - 3 pairs of lashing rings (LC 5,000 daN) Extendable loading area: - Loading area in extendable version - 5 pairs of lashing rings foldable outwards - 3 pairs of lashing rings foldable outwards - 1 pair of lashing rings laid flat at the front of the loading area - Cut-outs in the outer frame of the loading area for attaching tension belts - Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering Landing legs: - JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and tyres: - BPW axles, two rigid, two trailing steering axles - Air suspension, with drum brakes, with lifting/lowering function - The trailing steering axles with electro-magnetic reversing lock, can be activated either via reverse gear or manually - Axle tools - Tyres 205/65 R17.5 Brake system: - Brake system in accordance with EU regulations with EBS-E (4S3M) Steel construction: - Steel construction made of high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system in accordance with EU regulations, 24-volt lighting, ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets - Connections according to ISO: - 24N ISO-1185 - 24S ISO-3731 Godpet Ag Uwsfx Ap Deiu - 15-pin ISO-12098 Paintwork: - First-class and long-lasting corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) top coat, single-colour in Novagrau - Rear section metalized and painted in RAL 9010 (pure white) Included accessories: - One spare wheel with holder in front of the front wall - 2" kingpin - Galvanized steel front wall approximately 400 mm high - Yellow-red air couplings on the galvanized connection bar at the front - 4 wheel chocks with holders on the front wall - Galvanized folding supports under the sloped loading area - Bracket for a revolving beacon at the rear of the trailer - Galvanized, extendable width approx. 230 mm per side - White reflective tape to EU regulations on the side, at the extension, and red at the rear - At the gooseneck and on the rear plate, left and right, one bracket for warning signs each, including socket - European reflective warning plates (red-yellow) at the rear of the trailer - TPMS tyre pressure monitoring system according to ECE R 141 - On the gooseneck, plug-in aluminium side and rear panels approx. 2,440 x 400 mm - The rear, galvanized plug-in stakes are removable, length of the structure approx. 2,560 mm - 7 pairs of WADER container locks - 1x 20ft container on the loading area; 1x 40ft container on the loading area; 1x 40ft container above the gooseneck; 2x 20ft containers - 7 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area - Lift axle at the front axle controlled by TEBS E, depending on current axle load and load condition - Movable hanging bar for aluminium approach ramps at the rear of the vehicle - On checker plates on the gooseneck and loading area, a painted-in sand layer as anti-slip protection - Four warning signs each extendable by approx. 400 mm, size approx. 423 x 423 mm, with position light - On warning signs, bracket for rotating beacon - 80 km/h speed stickers on the rear and both sides - Load manometer for determining axle l

Stav: nový, pohotovostná hmotnosť: 12 000 kg, maximálna hmotnosť nákladu: 54 000 kg, celková hmotnosť: 66 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 245/70 R 17.5, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable loading platform design: - Extendable loading platform with rear chamfer approx. 1,000 mm x 8° - 5 pairs of fold-out lashing rings (LC 5,000 daN) - 3 pairs of fold-out lashing rings (LC 10,000 daN) - 1 pair of recessed lashing rings in the front loading area (LC 10,000 daN) - Cut-outs in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) - Hardwood flooring approx. 48 mm thick, over the axles with tread plate covering Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox, 24 t lifting capacity (50 t test load) Brake system: - WABCO braking system compliant with EU regulations with EBS-E (4S3M) Steel structure: Gijdjykpbkopfx Ap Dsu - Steel structure made from high-strength fine-grained steels Axles and tyres: - BPW axles and suspension, 1st axle rigid, all other axles hydro-mechanically forced-steered - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Axle tool - TPMS tyre pressure monitoring system in accordance with ECE R 141 - Tyres 245/70 R 17.5 3PMSF Accessories included: - 2" king pin - Galvanised steel front wall approx. 400 mm high - At the galvanised front connection plate: yellow-red air couplings - 4 wheel chocks with holder on the front wall - 1 spare wheel with holder in front of the front wall - Electro-hydraulic power unit - Forced steering, front and rear, operated via cable remote control with push buttons, with tracking control for the axles - European reflector plates (red-yellow) at the rear of the trailer - White reflective tape on the sides and the extension, red at the rear, in accordance with EU regulations - On gooseneck and rear left and right: holder for warning boards including socket - Galvanised, extendable width extensions, ca. 230 mm per side - Holder for beacon at the rear of the trailer - Galvanised folding supports under the rear chamfer of the loading platform - Mudflap at the rear - Operating manual and description on USB stick - Central lubrication system BEKAMAX (Pico) with standard lubrication grease NLGI-2 and removable guard around the pump - Plug-in ALU side boards and rear board on the gooseneck approx. 2,440 x 400 mm - Rear galvanised stakes are removable (body length approx. 2,560 mm) - INOX toolbox 1,350x400x400 on the gooseneck (note: box covers oil filler cap) - 4 pairs of WADER container pockets in the loading area for 1x 20ft, 2x 20ft, 1x 40ft, or 1x 45ft container - 7 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area - Sliding hook-in crossbar for ALU drive-on ramps at the rear - Square climbing bars 20 x 20 mm every 200 mm on the outside frame of the rear chamfer - Lift axle on the front axle with control via TEBS-E depending on axle load and current loading condition - Four warning boards extendable by approx. 400 mm, approx. 423 x 423 mm with a position light - Holder for beacon on the warning boards - Radio remote control for forced steering, in addition to cable remote, with indicator lights on receiver as single-track control - Non-slip sand coating painted onto tread plates on gooseneck and loading area - Speed stickers 80 km/h at the rear and on both sides - Load gauge for determining axle loads, including load diagram

Stav: použitý, najazdené kilometre: 243 676 km, výkon: 302 kW (410,61 k), prvá registrácia: 01/2019, typ paliva: nafta, celková hmotnosť: 32 000 kg, konfigurácia náprav: 3 nápravy, ďalšia kontrola (TÜV): 12/2026, farba: čierny, typ prevodu: mechanický, emisná trieda: Euro 6, objem nakladacieho priestoru: 13 m³, dĺžka ložného priestoru: 5 800 mm, šírka ložného priestoru: 2 380 mm, výška ložného priestoru: 1 000 mm, Výbava: ABS, klimatizácia, nezávislé kúrenie, * Slnečná clona * ABS * TCS (Systém kontroly trakcie) * Rádio * Palubný počítač * Tempomat * Elektrické okná * Elektricky nastaviteľné zrkadlá * Vyhrievanie zrkadiel * Strešný poklop * Komfortné sedadlo vodiča * Vyhrievané sedadlo * Pozdĺžne a priečne uzávierky diferenciálu * AP nápravy * Oranžové výstražné majákové svetlo * Nezávislé kúrenie * Centrálne zamykanie Gsdpfjyxifaox Ap Deiu * Oceľový nárazník * 12-stupňová prevodovka * Odpruženie: listové-pružinové/vzduchové * Nosnosť: 17610 * Trvalá brzda: motorová brzda ----Nadstavba: Meiller 3-stranný oceľ, Bordmatik vľavo, zvýšená čelná stena s ochranou proti vybagrovaniu, sklápacie zariadenie vzadu. Predaj len podnikateľom. PRI EXPORTE SA PLATÍ IBA ČISTÁ CENA!!!!! VŠETKY ÚDAJE BEZ ZÁRUKY VRÁTANE VÝBAVY A PRÍSLUŠENSTVA. Základom všetkých kúpnych zmlúv, faktúr, proforma faktúr, objednávok a predajných rozhovorov sú naše VOP (viď Impressum).

Stav: použitý, najazdené kilometre: 243 676 km, výkon: 302 kW (410,61 k), prvá registrácia: 01/2019, typ paliva: nafta, celková hmotnosť: 32 000 kg, konfigurácia náprav: 3 nápravy, ďalšia kontrola (TÜV): 12/2026, farba: čierny, typ prevodu: mechanický, emisná trieda: Euro 6, objem nakladacieho priestoru: 13 m³, dĺžka ložného priestoru: 5 800 mm, šírka ložného priestoru: 2 380 mm, výška ložného priestoru: 1 000 mm, Výbava: ABS, klimatizácia, nezávislé kúrenie, * Slnečná clona * ABS * TCS systém kontroly trakcie Godpfx Apjyxifgs Deiu * Rádio * Palubný počítač * Tempomat * Elektrické ovládanie okien * Zrkadlá elektricky nastaviteľné * Vyhrievanie zrkadiel * Strešné okno * Komfortné sedadlo vodiča * Vyhrievané sedadlo * Pozdĺžne a priečne uzávierky diferenciálu * AP nápravy * Oranžový maják * Nezávislé kúrenie * Centrálne zamykanie * Oceľový nárazník * 12-stupňová prevodovka * Odpruženie: listové-vzduchové * Užitočné zaťaženie: 17610 kg * Trvalá brzda: motorová brzda ----Nadstavba: Meiller trojstranný sklápací oceľový, Bordmatik vľavo, zvýšená predná stena s ochranou proti bagrom, zadné korýtko. Predaj iba podnikateľom. PRI EXPORTU SA PLATÍ LEN CENA BEZ DPH!!!!! VŠETKY ÚDAJE BEZ ZÁRUKY VRÁTANE VÝBAVY A PRÍSLUŠENSTVA. Základom všetkých zmlúv, faktúr, proforma faktúr, objednávok, predajných rozhovorov sú naše VOP (pozri Impressum).

Stav: použitý, pohotovostná hmotnosť: 10 900 kg, maximálna hmotnosť nákladu: 43 600 kg, celková hmotnosť: 54 500 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 04/2025, dĺžka ložného priestoru: 8 700 mm, šírka ložného priestoru: 2 550 mm, výška ložného priestoru: 855 mm, veľkosť pneumatiky: 245/70 r17.5, farba: sivý, Rok výroby: 2025, prevádzková hmotnosť: 10 900 kg, Výbava: ABS, Gooseneck, rigid, in central tube design: - Enclosed outer frame with cutouts for lashing straps (LC 1,500 daN) - Steel flooring with anti-slip coating - Including perforated rail for aluminum approach ramps - 2" king pin - Mechanically operated BPW landing gear - 550 mm long, 8° bevel at the rear end of the gooseneck - Front bulkhead including stowage position for rear wall, 400 mm high - Spare wheel holder mounted upright at the front of the gooseneck - 3 pairs of recessed lashing rings LC 5,000 daN on the gooseneck deck - Aluminum drop-in sideboards, 400 mm high, consisting of 2x sideboards (length 3,150 mm) and rear board with stanchions (galvanized) - Rectangular storage box, aluminum, with folding lid and lockable, approx. 400 x 800 mm, centrally mounted - Storage box 45’, aluminum, with folding lid and lockable, approx. 400 x 800 mm, left side - Storage box 45’, aluminum, with folding lid and lockable, approx. 400 x 800 mm, right side Load platform, single telescoping: - Enclosed outer frame with cutouts for lashing straps (LC 1,500 daN) - Fixed section at front 700 mm - Steel tread plate with anti-slip coating - Beveled transition between fixed section and load platform for attaching bridging rails and wheel recesses - Excavator recess including elongated holes for load securing (LC 1,500 daN), approx. 3,850 mm long - Prepared for hydraulic ramp (electric supply fitted) - Beams for extension to 3,000 mm width - Beveled vehicle rear, 8°, 550 mm long - Sled-type design for easy mounting and removal of ramps - Continuous rear mudflap - 1 pair of lashing points LC 10,000 daN centrally on the platform behind the gooseneck - 7 pairs of lashing points LC 10,000 daN on outer frame of the platform - 6 pairs of stake pockets 100 x 50 mm on the outer frame of the platform - 1 pair of lashing points LC 10,000 daN centrally at the rear of the platform - 1 pair of stake pocket rails approx. in the middle of the platform - 1 pair of stake pocket rails on the fixed section - 1 pair of stake pocket rails behind the last axle Ramps: - Hydraulic twin-fold ramps, 2,750+1,500x800 mm - Larch timber decking - Operated via remote control (either wired or wireless) - Ramps with quick-change (removal system) Chassis: - BPW ECO Max axle make - 2 ride heights - 4 axles, each 10 t (technically 12 t) - Twin tires 245/70 R17.5 - 2 rigid axles and 2 friction-steered axles - Reverse steering lock for friction-steered axles via reverse gear Giedji Ai E Ropfx Ap Dju - Brake system make Knorr (in accordance with EU directives with EBS-E) - TIM G2 by Knorr (Trailer Information Module) - RSS (Roll Stability Support) - Load-dependent lift axle on the first axle including starting aid (forced lowering of lift axle via TIM possible) Accessories: - 4 wheel chocks with holder - 2 pairs of warning boards 423 mm x 423 mm, with 2 marker lights and mounting position for beacon, continuously adjustable up to 3,950 mm - Mounting options on gooseneck and platform (alternatively on ramp, if present) are included - Insertable bulkhead at the end of the excavator recess - Electro-hydraulic unit for ramp operation - Wireless remote control for ramp operation - Hydraulic stabilizer legs at vehicle rear for support during loading - 1 pair of additional reversing lights at the rear, activated with reverse gear - Larch wood extension beams (option)

Stav: nový, pohotovostná hmotnosť: 9 650 kg, maximálna hmotnosť nákladu: 30 350 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 740 mm, šírka ložného priestoru: 2 550 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 r17,5 zoll, Rok výroby: 2026, Výbava: ABS, stredová otočná doska, 4-AXLE LOWBED TRAILER WITH TOP-LEVEL EQUIPMENT! => HOT-DIP GALVANIZED (CHASSIS FRAME, TURNTABLE FRAME, ACCESS RAMPS) => FULL AIR SUSPENSION => WITH LIFTING AND LOWERING FUNCTION (REAR AXLE UNIT!) => SAF LOWBED AXLES => LASHING PACKAGE => PERFORATED OUTER FRAME FOR ADDITIONAL LASHING POINTS => CLEAT STRIPS ON THE REAR OF THE ACCESS SLOPE => 6 LASHING POINTS IN THE EXCAVATOR SHOVEL WELL AT THE REAR END => LONG ONE-PIECE ACCESS RAMPS => SHALLOW RAMP ANGLE Perm. Gross Weight: 40,000 kg Payload approx. 30,350 kg Chassis frame hot-dip galvanized Turntable frame hot-dip galvanized Access ramps hot-dip galvanized Air suspension SAF axle with drum brakes EBS - Electronic Braking System Tires: 235/75R17.5 – 16 ply Lowbed length approx. 7,160 mm Excavator stick recess approx. 3,000 mm x 730 mm x 180 mm at rear lowbed 4 pairs of 10 t recessed lashing rings in the lowbed 2 pairs of 10 t recessed lashing rings in the highbed 4 pairs of 3 t lashing points on lowbed outer frame 3 pairs of 6 t lashing eyes on outer frame 4 pairs of stake pockets on highbed outer frame 4 pairs of stake pockets on lowbed outer frame 3-meter widening package with fold-out extensions (no taper) 4 x warning boards with lighting Rotating beacon at the rear LARGE STEEL TOOLBOX under the loading area 2 storage compartments with hinged lids in the high platform Hydraulic ramp lifters One-piece ramps approx. 3,150 x 750 mm Softwood flooring on loading area and ramps 40,000 kg gross weight only with special permit according to §70 => Delivery freight: €2.90 plus VAT per km => All prices ex works D-86368 Gersthofen Giedehvxgzepfx Ap Dsu Your direct contact: Mr. Hauptmann, Tel. DOLL VEHICLE MANUFACTURING *Subject to prior sale and changes!* *Price valid ex D-86368 Gersthofen* *Sales only to commercial customers!* *Pictures may differ and are for general guidance only => may show/contain optional accessories subject to surcharge*

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, pohotovostná hmotnosť: 15 900 kg, maximálna hmotnosť nákladu: 42 100 kg, celková hmotnosť: 58 000 kg, konfigurácia náprav: 3 nápravy, povolené zaťaženie nápravy (náprava 1): 10 000 kg, dovolené zaťaženie nápravy (náprava 2): 10 000 kg, povolené zaťaženie nápravy (náprava 3): 10 000 kg, prvá registrácia: 11/2001, dĺžka ložného priestoru: 8 960 mm, šírka ložného priestoru: 2 520 mm, celková dĺžka: 12 950 mm, celková šírka: 2 520 mm, celková výška: 3 800 mm, zavesenie: hydraulika, veľkosť pneumatiky: 245/70R17,5, rázvor náprav: 1 360 mm, maximálna rýchlosť: 90 km/h, farba: modrá, brzda prívesu: príves s brzdou, Rok výroby: 2001, Výbava: ABS, Nooteboom MCO-73-04V TOP trailer from first owner, first registration 21.11.2001, Overhauled in 2014, Brakes NEW as of 12/2025! 66,000 kg gross train weight with 3-axle tractor unit, Gross weight 58,000 kg, Gsdpfx Aoyqm I Uep Dsiu Kingpin load 18,000 kg, axles 1–4: 10,000/10,000/10,000/10,000 kg Unladen weight 15,900 kg, For exact dimensions, please refer to the technical data sheet. Lowbed 8.96 m + 5.50 m extension (telescopic), Hydraulic supports at front and rear allow the entire trailer plus 30 t load to be lifted easily; ideal for side unloading from loading ramps, Hydraulic suspension (also enables leveling for uneven load distribution), 1st axle liftable, 4 steerable axles, either automatic or remote-controlled as desired (including counter-steer), Hydraulic ramps + hydraulically extendable to 3,000 mm, Loading platform extendable to 3,000 mm, Tyres 245/70R17.5 1A=6/6/6/6 mm, 2A=11/11/8/8 mm, 3A=9/9/7/7 mm, 4A=11/11/7/5 mm, spare wheel 6 mm, Further details on request. Sale only to businesses or for export. Leasing / Financing available on request – instant processing, even without down-payment! More information and conditions on request. The vehicle description serves solely for general identification of the vehicle. Information, images, and descriptions are provided without guarantee! Equipment must be checked separately if necessary. The seller accepts no liability for possible typographical or data transmission errors. Subject to error and prior sale. Thank you for your interest! We look forward to your visit. OUR SERVICE We are happy to take your used equipment in part-exchange, 30-day export license plate incl. insurance, EUR-1 + all customs documents for export, TÜV / technical inspection / accident prevention test / tachograph check / OBU installation, Professional delivery to customer, Airport Stuttgart / Sindelfingen train station pick-up by arrangement, Retrofitting of additional accessories as well as other individual customer requests possible upon consultation.

Stav: použitý, prvá registrácia: 10/2001, Rok výroby: 2001, Nooteboom 4-nápravový kontajnerový podvozok deliteľný na 2 časti - 1. element: 1 náprava - 11 000 kg celková hmotnosť - 2. element: 3 nápravy - 26 000 kg celková hmotnosť - ABS - Vzduchové odpruženie - 4 x BPW Eco Plus nápravy - 1. náprava zdvíhateľná - Zariadenie na zdvíhanie/spúšťanie - Po 2 oporné nohy vpredu aj vzadu Giedpfswmpa Hox Ap Deu - Pneumatiky: 385/55 R 22.5 - Nemecký náves - TÜV / STK / SP: na želanie a za príplatok: nové! Chyby a predbežný predaj vyhradené!

Stav: použitý, prvá registrácia: 11/2006, Rok výroby: 2006, MÜLLER - MITTELTAL T4 Kompakt Otočný čap - Nízkozdvižný príves so vzduchovým odpružením a kolískami na kolesá - 4 x vzduchom odpružené GIGANT - nápravy - vzduchové odpruženie - 4 x kolískové lôžka na kolesá - mechanické nájazdové rampy - 2 zadné podpery, sklopné - výsuvné výstražné tabule - ABS - Pneumatiky MICHELIN: 235/75 R 17.5 - Ťažké prevedenie: 40.000 kg celková hmotnosť - Pohotovostná hmotnosť: 8.400 kg - Celková dĺžka: 11.750 mm - Ťažné oko: 50 mm Obzvlášť vhodný na prepravu fréz na vápno! Gsdpfswmpbdjx Ap Dsiu - Nemecký príves - STK/ kontrola bezpečnosti na želanie a za príplatok možná! Možné chyby a medzi-predaj vyhradený!

Stav: nový, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, celková šírka: 2 530 mm, Rok výroby: 2025, Výbava: ABS, 2-axle self-steering trailer type M2K-9L * COMPACT steering system * Corrosion resistance through powder coating * All attachments bolted * Conventional wiring * Brackets and attachments in stainless steel or galvanized * 2 single axles, BPW, 10 t with disc brakes, including safety cables * Air suspension * Aluminum air tank * Bolster model IX with 1x mechanically telescoping stakes * Tires 275/70 R 22.5 on steel rims * EBS braking system * LED tail lights with integrated triangle reflector * 4x LED work lights (1,800 lumen) * Manual central lubrication * Paint: RAL 9011 graphite black * Payload approx. 14,550 kg 2-axle self-steering trailer type M2K-10B * Differences compared to the M2K-9L: * Leaf spring suspension * 2 single axles, BPW, 12 t with drum brakes, including safety cables * Bolster model IX with 1x hydraulically telescoping stakes * Tires 315/80 R 22.5 on steel rims * Electric central lubrication * Payload approx. 14,100 kg Gijdpfx Apsgqc Hbe Dsu 2-axle self-steering trailer type M2K-10L * Differences compared to the M2K-9L: * 2 single axles, BPW, 12 t with drum brakes, including safety cables * Bolster model IX with 1x hydraulically telescoping stakes * Tires 315/80 R 22.5 on steel rims * Electric central lubrication * Payload approx. 14,100 kg 2-axle self-steering trailer type M2R-10L Differences compared to the M2K-9L: * Ratio steering system (4-cylinder) * 2 single axles, BPW, 12 t with drum brakes, including safety cables * Bolster model IX with 1x hydraulically telescoping stakes * Tires 315/80 R 22.5 on steel rims * Electric central lubrication * Payload approx. 13,965 kg Various additional equipment available. Further information on request. Illustrations may differ from the original. All information without guarantee. Contact: Niclas Lott Tel.:

Stav: nový, maximálna hmotnosť nákladu: 56 570 kg, celková hmotnosť: 66 500 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 550 mm, Výbava: ABS, Celú našu ponuku vozidiel, vrátane okamžite a v krátkom čase dostupných vozidiel, nájdete na našej webovej stránke. Výpis z výbavy. Kompletná výbava na požiadanie. Podvozok: * Rám podvozku zvarený z pozdĺžnikov a priečnikov prechádzajúcich cez celý rám * Podjazdový nos vyčnievajúci cca 700 mm * Odrážacia doska min. cca 8 mm hrubá, umiestnená medzi pozdĺžnikmi * Vzdialenosť medzi priečnikmi max. 400 mm (pre pozdĺžne uloženú podlahu) * Kráľovský čap 3,5'' podľa normy SAE, vymeniteľný * Vonkajší rám ako UNP 200, otvorený smerom von Podperné nohy: * 24 t teleskopická podpera JOST - MODUL CH (Heavy Duty) S-noga Nápravy: * 4 x 10 t SAF nápravy s veľkopriemerovou bubnovou brzdou * 22,5" jednoduché obutie * Rozstup náprav cca 1 700/1 810/1 810 mm * Každý vzduchový agregát má nosnosť 10 t so zdvíhacím a spúšťacím zariadením a jedným otočným ventilom Knorr/Wabco * Uchytenie pre zdvíhacie a spúšťacie zariadenie, skrutkované prevedenie Brzdy: * Smartboard/TIM/Infocenter na držiaku pre zdvíhanie a spúšťanie, dodatočne k ventilu pre zdvíhanie a spúšťanie, bez batérie (ovládateľné iba ťažným vozidlom) * Držiak pre svetlá a brzdu vpredu na spodnom nárazníku, celková výška cca 700 mm * Kontrola tlaku v pneumatikách základná verzia, napojená na CAN-bus systém EBS * Dvojité uvoľňovacie ventily pre brzdu a pružinový akumulátor * Testovací ventil pre tlak brzdového valca vpredu vpravo * Po 1 spojovací hlavici červenej a žltej * Zdvíhacie a spúšťacie zariadenie namontované vzadu vľavo v smere jazdy * EBS brzdový systém značky Wabco, diagnostika EBS cez CAN-bus (EBS konektor), žiadny diagnostický kábel vyvedený von! Pneumatiky: * 8x 445/65 R 22.5 – značková voľba podľa dodávateľa * Stredenie kolies Mazanie: * Rozvodné lišty mazacích tŕňov na podvozkoch a vpredu na riadení. Bez centrálného mazania Nadstavba: * Bez certifikátu nadstavby podľa DIN EN 12642 XL * 2x LED pracovné svetlá hore na prednej stene (svietia dozadu), vypínač na držiaku pre zdvíhanie a spúšťanie * Predná stena pre plato, zosilnené vyhotovenie * Kontúrne označenie po bokoch žlté, vzadu žlté * Predná stena cca 800 mm vysoká, s plechovým opláštením, skrutkované prevedenie Svetelná výbava: * 2x LED pracovné svetlá, namontované na lampovej lište, s ovládaním cez spätný chod * 2x LED pracovné svetlá, ovládanie cez spätný chod, na každej strane jedna pri podpernej nohe * 2x LED cúvacie svetlo na každú stranu pred prvou nápravou * Svetelný systém/elektroinštalácia značky podľa výberu * Osvetlenie ŠPZ Gijdswx Dctjpfx Ap Dju * Ťažné vozidlo musí poskytovať dostatočný výkon pre zvolenú svetelnú výbavu (najmä spätné svetlo) * Pozíčné svetlá vpredu, dole, biele po jednom na každej strane (LED) * Svetelná výbava 24V s veľkým multifunkčným svetlom * Bočné označovacie svetlá (LED) blikajúce * 1x 15-pin a 2x 7-pin zásuvky vpredu cez multifunkčnú skrinku * Zásuvka EBS * 1 pár vodiacich svetiel (LED) Podlaha: * Tvrdé drevo cca 28 mm striedavo s pozinkovanými omega oceľovými profilmi Lakovanie/povrchová úprava (bez metalíz): * Lakovanie podvozku v zvolenom RAL odtieni * Predná stena (oceľová konštrukcia) v zvolenom RAL odtieni * Náboj kolesa v farbe podvozku * Nápravy a podperné nohy čierne * Kolesá v hliníkovej/striebornej podobnej RAL 9006 * Matice kolies bez povrchovej úpravy * Lakovanie podjazdového ochranného zariadenia v RAL 9010 čistobiela (hliník) Príslušenstvo: * Zdvíhacie zariadenie pre 1. nápravu * Na každej strane 9 ks hákových plechov zvarené do vonkajšieho rámu. Sila utiahnutia max 3 000 daN * Na každej str

Stav: nový, maximálna hmotnosť nákladu: 45 250 kg, celková hmotnosť: 58 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 550 mm, Výbava: ABS, Our complete inventory of immediately and short-term available vehicles can be found on our website. Excerpt from the equipment list. Full equipment details available on request. Chassis, cranked: * Special steel frame made of high-strength fine-grained steels, electrically welded at the joints * Well-dimensioned outer frame, 4-axle configuration * Wheel covers above the axles with spray suppression * All steel parts sandblasted * Side underrun protection made of anodized aluminum installed * Increased point load approx. 30,000 kg over approx. 4,000 mm * Special design in the cranked section for maximum low-bed length in combination with AluLeg drop supports instead of telescopic support winches, maximum rear swing radius of the tractor unit approx. 2,100 mm Special body with rear stake widening: * DINKEL special body * Self-supporting aluminum roof rail/profile approx. 120 x 100 mm, sliding roof with plastic flaps * Rear stakes can be widened for loading and unloading to approx. 4,200 mm * Three sliding stakes per side with rubber tension compensation * Additional center stake lockings in the roof rail and park position, operated by pull cable and spring bolt * DINKEL mechanical height-adjustable lifting roof * Lifting roof height approx. 400 mm, operable from both or one side without opening the opposite side * Additional height adjustment of approx. 480 mm in approx. 40 mm increments via stake adjustment * Front overlap at the bulkhead for driving under tarpaulin up to a total height of approx. 4,400 mm * Four rows of stackable approx. 150 mm aluminum slats on the sides, lower pockets for 450 mm slats, above four rows of single pockets. In the high-bed area only three rows of insertable slats, spacing evenly distributed Floor: * Approx. 27 mm special water-resistant glued beech plywood anti-slip boards, rough surface * Steel sheet in the wheel area. Forklift-trafficable according to DIN standard Gisdpfx Apjwx Dbij Dsu * Outer frame with flush surface Brakes: * WABCO air brake system with EBS according to EU standard 71/320 EEC incl. PREV (parking release safety valve) * Spring-loaded brake cylinders as parking brake * Wabco Smart Board with odometer and axle load indicator * Including WABCO tire pressure monitoring Axles: * 4 x 10,000 kg SAF axles with drum brakes, low-loader design * Air suspension with lift and lower device, total lift approx. 230 mm * Third and fourth axles as friction-steered trailing axles with electric and mechanical lock Twin tyres: * 235/75 R 17.5, 16-ply. Brand of our choice, incl. wheel holder * Without spare wheel Lighting: * As per EU standard including LED side marker lights * Position lamps in LED version * 2 additional reversing lights * 2 working lights on inside front wall, upper Paintwork: * Chassis and body painted in single color RAL 3002 carmine red * Center stakes and axles KTL coated in black * Corner stakes galvanized * Plastic parts black * Galvanized parts unpainted * Rims factory silver Special equipment included: * 15-pin electrical supply line * Air suspension in ECAS version, operated on the trailer * Oversize marking signs for front and rear made of galvanized, infinitely extendable design with installed marker lights including sockets for rotating beacons (small plates) * Additional unlocking for sliding roof frame from outside * 4 stake adapters for special outer frame profile, for arbitrarily locking the center stakes * PVC sliding tarpaulins, color similar to RAL 9006 silver, oversize and...

Stav: použitý, pohotovostná hmotnosť: 6 440 kg, maximálna hmotnosť nákladu: 27 560 kg, celková hmotnosť: 34 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 02/2025, dĺžka ložného priestoru: 10 500 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 2 200 mm, objem nakladacieho priestoru: 57 m³, zavesenie: vzduch, farba: strieborný, Rok výroby: 2025, najazdené kilometre: 153 649 km, typ prevodu: mechanický, Výbava: ABS, Pohotovostná hmotnosť: 6440 kg, prípustná celková hmotnosť: 34000 kg, ložný priestor (D Š V): 10.500 mm x 2.470 mm x 2.200 mm, objem ložného priestoru: 57 m³, vzduchové pruženie, zdvíhacia náprava: 3. náprava nútene riadená, elektronický brzdový systém EBS, sledovaná náprava, kyvná klapka, korba odolná voči blatu, rolovacia strešná plachta, plošina, antisprej, hliníkové disky: ALCOA, indikátor zaťaženia náprav, systém plachiet, informačný modul návesu, nápravy SAF, pneumatiky 385/65R22,5, paletové prevedenie, L10500 Š2470 V2200 57m³, obilný sklz, sedlová výška 1200, VAVKSK339PH518676, predaj v komisii, nezáväzná ponuka, právo na omyl a medzi-predaj vyhradené. Obrázok nemusí zodpovedať ponuke. Giodpfozcruksx Ap Dsu

Stav: použitý, pohotovostná hmotnosť: 6 000 kg, maximálna hmotnosť nákladu: 32 270 kg, celková hmotnosť: 38 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 09/2012, zavesenie: vzduch, veľkosť pneumatiky: 385/65 R22,5, Výbava: ABS, | Schwarzmüller 3-nápravový náves na drevo | Nápravy BPW s kotúčovými brzdami | Prevádzková hmotnosť 6000 kg | Zdvihateľná náprava | Pneumatiky: 385/65 R22,5 Zmena údajov, chýb a predpredaj vyhradený. Gjdpfxowdwp Ds Ap Deiu

Stav: použitý, pohotovostná hmotnosť: 9 300 kg, maximálna hmotnosť nákladu: 24 700 kg, celková hmotnosť: 34 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 12/2009, celková výška: 138 400 mm, zavesenie: vzduch, veľkosť pneumatiky: 385/55R22,5, Výbava: ABS, registrácia nákladného vozidla, | Schwarzmüller valníkový náves | coil-vanička | hydraulické šikmé nakládání | pneumatiky: 385/55R22,5 | posuvná plachta Edscha | nápravy Mercedes s kotoučovými brzdami | zvedací náprava, změny, chyby v zadání a předchozí prodej vyhrazeny. Gsdpet Di Icefx Ap Dsiu

Stav: použitý, pohotovostná hmotnosť: 5 520 kg, maximálna hmotnosť nákladu: 32 480 kg, celková hmotnosť: 39 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 08/2017, ďalšia kontrola (TÜV): 08/2025, zavesenie: vzduch, veľkosť pneumatiky: 385/65 R22,5, Výbava: ABS, | Schwarzmüller 3-nápravový náves na drevo | SAF nápravy s kotúčovými brzdami | Prevádzková hmotnosť: 5520 kg | Nosnosť: 32480 kg | Zdvíhacia náprava | Pneumatiky: 385/65 R22,5 | 10 párov stĺpikov | S výhradou chýb, preklepov a predchádzajúceho predaja. Giedpfxjx S N Ubo Ap Dou

Stav: použitý, pohotovostná hmotnosť: 5 730 kg, maximálna hmotnosť nákladu: 32 270 kg, celková hmotnosť: 38 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 05/2014, ďalšia kontrola (TÜV): 05/2025, zavesenie: vzduch, veľkosť pneumatiky: 385/65 R22,5, Výbava: ABS, Schwarzmüller drejnápravový návěs na dřevo | BPW nápravy s kotoučovými brzdami | Vlastní hmotnost: 5730 kg | Užitná hmotnost: 32 270 kg | Zvedací náprava | Technická kontrola platná do 05/25 | Pneumatiky: 385/65 R22,5 S výhradou omylů, chyb v zadání a předchozího prodeje. Godpfx Ajwc Apyep Djiu

Stav: použitý, pohotovostná hmotnosť: 8 050 kg, maximálna hmotnosť nákladu: 30 950 kg, celková hmotnosť: 39 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 05/2021, objem nakladacieho priestoru: 92 m³, zavesenie: vzduch, veľkosť pneumatiky: 385/65 R22,5, Výbava: ABS, | Schwarzmüller posuvná podlaha S1 J série | Hydraulické přípojky na čelní stěně | Nápravy SAF s kotoučovými brzdami | Skříňka na nářadí, držák rezervního kola | Provozní hmotnost: 8050 kg | Disky z lehkých slitin | Dálkové ovládání | Pneumatiky: 385/65 R22,5 | 92 m³ | Změny a předchozí prodej vyhrazeny. Gisdpfevialtsx Ap Deu

Stav: nový, pohotovostná hmotnosť: 6 020 kg, maximálna hmotnosť nákladu: 27 980 kg, celková hmotnosť: 34 000 kg, konfigurácia náprav: 3 nápravy, objem nakladacieho priestoru: 25 m³, zavesenie: vzduch, veľkosť pneumatiky: 385/65 R 22,5, stav pneumatík: 100 percento, Výbava: ABS, Schwarzmüller K-séria 3-nápravová oceľová segmentová korba | Objem: cca 25 m³ | ABS / EBS | 9t SAF nápravy s kotúčovými brzdami | Plné vzduchové odpruženie | Vonkajšia klapka | Pneumatiky: 385/65 R 22,5 | Oceľová okrúhla korba 7 650 mm x 1 470 mm | Podlaha z 5 mm HB 450 | Steny z 4 mm HB 450 | Predná plošina | Prevádzková hmotnosť 6 020 kg | Rolovacia plachta | S výhradou chýb, preklepov a predchádzajúceho predaja. Giedpfx Aeywywkop Dju