Max Trailer 3-Achs-Jumbo-Semi-Rampen-Planenaufbau kúpiť použité (55 400)

Stav: použitý, pohotovostná hmotnosť: 11 950 kg, maximálna hmotnosť nákladu: 37 550 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 02/2025, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R17.5, farba: sivý, Rok výroby: 2025, Výbava: ABS, For every used semi-trailer, you receive a current and comprehensive inspection and functionality report. Gooseneck: - Gooseneck, rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings - 30 mm thick hardwood flooring Two-part steel ramps: - One pair of galvanized two-part steel ramps, approx. 3,185 x 1,420 x 1,250 mm with grid grating - Ramps with hydraulically folding sections and hydraulic lift system - Maximum load per pair: 30,000 kg Loading area: - Loading platform with rear bevel approx. 1,000 mm x 8° - 5 pairs of outward folding lashing rings - 3 pairs of outward folding lashing rings - 1 pair of recessed lashing rings at the front of the loading platform - Approx. 48 mm thick hardwood flooring, checker plate covering above axles Axles and tires: - BPW axles and suspension, two fixed axles, one trailing steering axle - Air suspension with lift and lower valve - Trailing steering axle with electromagnetic reverse lock, actuatable via reverse gear or manually - Tires: 235/75 R17.5 3PMSF Included accessories: - 1 spare wheel with holder - TPMS tire pressure monitoring system according to ECE R 141 - 2" kingpin - Galvanized steel front wall - Yellow-red air couplings on galvanized connection strip at the front - 4 wheel chocks with holder - Mounting bracket at rear gooseneck for ALU drive-on ramps - 3 heights of aluminum boards - Galvanized folding supports under platform bevel - Bracket for warning beacon at trailer rear - Height-adjustable curtain superstructure (3,960 mm) - Galvanized front wall with tension mechanism for sliding curtain - Adjustable height by approx. 400 mm - "EDSCHA" roof, sliding forward on aluminum roof beam profiles, screwed at front and rear wall - 3 pairs of sliding stanchions on loading platform - Rear structure hydraulically widenable to left and right by approx. 750 mm - Sliding roof with swing-up portal beam - Sliding tarp with 700 mm length reserve, with tension belts at approx. 600 mm spacing - Height to upper edge of superstructure approx. 3,960 mm - Driving with open sliding roof is not permitted and will damage the tarp - Cover plates for bridging gap between ramps and loading platform - Electro-hydraulic unit at rear, under loading platform - Gooseneck and ramp each fitted left and right with warning sign holders including socket - European reflective panels (red-yellow) at the rear of the trailer - 6 pairs of stanchion pockets for plug-in stanchions 100 x 50 mm in outer frame of platform - Lift axle at front axle with TEBS E control, dependent on current axle load and loading state - Grid grating on platform bevel C40/4 (point load 3.4 t on 20 x 20 cm area) - INOX toolbox 565 x 290 x 810 mm, right side in direction of travel, between axles - Anti-slip sand layer applied to checker plates on gooseneck and loading platform - BEKAMAX (Pico) centralized lubrication system with NLGI-2 multi-purpose grease - Four extendable warning signs approx. 400 mm, dimensions approx. 423 x 423 mm - Load gauge for axle load determination, including load chart - HRM high resistance metallisation of the outer frame Hnjdpfx Apey Drdcsrjr - Complete steel construction shot-blasted; subsequently the defined visible surfaces hot-finished in metallization with ZINACOR 850 (Zinc 85% - Alu 15%)

Stav: nový, pohotovostná hmotnosť: 10 700 kg, maximálna hmotnosť nákladu: 38 800 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 r 17,5, farba: sivo-čierny, Výbava: ABS, Gooseneck: •Gooseneck with beveled front corners at 45° and rear chamfer approx. 750 mm x 10° •3 pairs of lash rings •30 mm thick hardwood decking Extendable Load Platform: •Extendable load platform with rear chamfer approx. 1,000 mm x 8° •Cut-outs in the outer frame of the load platform for attaching lashing straps •Approx. 48 mm thick hardwood decking, over the axles with chequer plate covering Two-piece Steel Ramps: •One pair of galvanized, two-piece steel ramps with approx. 48 mm thick hardwood covering •Ramps with hydraulically foldable ramp sections, hydraulic lifting system, and hydraulic lateral adjustment •Maximum capacity per pair: approx. 40,000 kg Axles and Tyres: •BPW axles and suspension, 2 rigid axles, 1 trailing steering axle •Technical axle load: 12,000 kg •Electromagnetic reverse lock, activated via reverse gear and manually •Air suspension with lift and lower valve •Axle tools •235/75 R 17.5 3PMSF Hodpfshlz S Nex Aprjnr Braking System: •WABCO braking system according to EU regulations with EBS-E Paintwork: •First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component zinc dust primer •High-quality, single-tone 2-component topcoat in MB 7350 Novagrau •Rear section metalized and painted in RAL 9010 Landing Legs: •JOST landing gear with 2-speed gearbox for 24 t lifting capacity (50 t test load). Steel Construction: •Steel construction made from high-strength fine-grained steels •Steel grades: •S355J2+N/S355MC •S690QL/S700MC Electrical System: •Electrical system complying with EU regulations, 24 volt lighting •ASPÖCK-UNIBOX on the front connection board with 24N, 24S & 15-pin sockets Accessories Included: •One spare wheel with holder •One galvanized steel front wall approx. 400 mm high •Yellow-red air couplings on the galvanized front connection board •4 wheel chocks •A holder for a warning beacon at the rear of the trailer •Recess in the rear gooseneck area for ALU approach ramps •Galvanized folding supports under the chamfer of the load platform •Cover plates to bridge the gap between the ramps and the load platform •White reflective tape as per EU regulations on the sides, extension, and rear (red) •Electro-hydraulic unit at the rear, under the load platform •One holder each on the gooseneck and on each ramp, left and right, for warning signs incl. socket •Ramp control valves mounted on the right-hand side of the trailer •On the gooseneck, ALU side and rear boards approx. 2,440 x 400 mm •Rear galvanized plug-in stakes are removable (body length approx. 2,560 mm) •Four warning panels, extendable by approx. 400 mm, each with a position light •3 pairs of WADER container pockets in the platform for a 20ft, 30ft, or 40ft container •6 pairs of stake pockets (100x50 mm) in the outer frame of the load platform •Galvanized extensions, extendable by approx. 230 mm per side •20 x 20 mm square toehold strips every 200 mm on the outer frame of the platform chamfer •Sanded surface finish painted on the chequer plates, king pin, and load platform as anti-slip protection •Load gauge for determination of axle loads, including load diagram •HRM metallization (High Resistance Metallisation) of the outer frame •Complete steel structure shot-blasted, then the defined visible areas metallized with ZINACOR 850 (zinc 85% - aluminium 15%) by hot finish

Stav: použitý, pohotovostná hmotnosť: 11 880 kg, maximálna hmotnosť nákladu: 49 920 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 05/2026, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R17.5, farba: sivý, Rok výroby: 2026, Výbava: ABS, zdvíhacie čelo, Labutia: - Labutia so zadnou šikmou plochou, cca 750 mm x 10° - 3 páry upevňovacích krúžkov (LC 5 000 daN) - Tvrdodrevo, hrúbka 30 mm Nákladová plošina: - Nákladová plošina s vysúvacou konštrukciou a zadnou šikmou plochou, cca 1 000 mm x 8° - 5 párov upevňovacích krúžkov, výklopných smerom von (LC 5 000 daN) - 3 páry upevňovacích krúžkov, výklopných smerom von (LC 10 000 daN) - 1 pár upevňovacích krúžkov, umiestnený horizontálne v prednej časti nákladovej plošiny (LC 10 000 daN) - Výrezy vo vonkajšom ráme nákladovej plošiny na pripevnenie napínacích pásov (LC 2 000 daN) - Tvrdodrevo, hrúbka cca 48 mm, nad nápravami profilovaná oceľová doska Rampy: - Jeden pár pozinkovaných dvojdielnych oceľových ramp, cca 2 750 + 1 400 x 800 mm, s tvrdodrevom, hrúbka cca 48 mm - Rampa s hydraulicky výklopnými a záklopnými časťami rampy, hydraulickým zdvihacím mechanizmom a hydraulickým posúvaním - Maximálna nosnosť na pár: 40 000 kg Podpory sedla: - JOST podpory sedla (mechanické) s 2-stupňovou prevodovkou pre 24 t zdvihovú kapacitu (50 t testovacia nosnosť) Nápravy a pneumatiky: - BPW nápravy, dve pevné nápravy, dve riadené nápravy - Vzduchové odpruženie, s bubnovou brzdou, so zdvihacou/spúšťacou funkciou - Riadené nápravy s elektromagnetickou blokádou pri cúvaní, aktivovateľná prostredníctvom spiatočky alebo manuálne - Systém monitorovania tlaku v pneumatikách (TPMS) podľa ECE R 141 - Pneumatiky 235/75 R17.5 Lakovanie: - Obehovanie tryskaním pomocou korundu pre optimálnu priľnavosť náterového systému - HRM metalizácia celého rámu vozidla pomocou ZINACOR 850 (85 % zinok / 15 % hliník) - Záverečné lakovanie dvoma vrstvami 2K krycieho laku, jednofarebný, DB 7350 Novograu Dodatočné vybavenie (súčasťou): - Na labutí a v zadnej časti, vľavo a vpravo, držiak na výstražné tabule, vrátane zásuvky - Jedna náhradná pneumatika s držiakom - 2" kráľovský čap - Jedna pozinkovaná oceľová čelná stena, cca 400 mm vysoká - Na pozinkovanej spojovacej lište v prednej časti, žlto-červené vzduchové spojky - 4 kusy podkladových klinov s držiakom - Pozinkované výklopné podpory pod šikmou plochou nákladovej plošiny - Držiak na otočnú výstražnú lampu v zadnej časti návesu Hsdpfszp Ntvox Aprjnr - Krycie plechy na preklenutie priestoru medzi rampami a nákladovou plošinou - Biela reflexná páska podľa noriem EÚ na boku a na vysúvacej časti, vzadu červená - Elektro-hydraulická agregátna jednotka vzadu, pod nákladovou plošinou - Ovládacie ventily pre rampy, umiestnené na pravej strane návesu - Jedna ochranná doska vzadu - Európske reflexné značky (červeno-žltá) vzadu na návese - Používateľská príručka a popis na USB disku - Štyri vysúvacie výstražné tabule, cca 400 mm, cca 423 x 423 mm s pozičným svetlom - Na labuti sú ALU bočné steny a zadná stena, pripojiteľné, cca 2 440 x 400 mm - Zadné, pozinkované bočné steny sú odnímateľné (dĺžka nadstavby cca 2 560 mm) - 4 páry držiakov na kontajnery WADER na nákladovej plošine pre 1 x 20 ft, 2 x 20 ft alebo 1 x 40 ft kontajner - 7 párov držiakov na bočné steny pre bočné steny 100 x 50 mm vo vonkajšom ráme nákladovej plošiny - Rozšírenia, pozinkované, vysúvacie cca o 230 mm na každú stranu - Zdvihacia náprava na prednej náprave, riadená systémom TEBS-E v závislosti od aktuálnej hmotnosti nápravy a aktuálneho stavu zaťaženia - Štvorecové lezecké lamely 20 x 20 mm každých 200 mm na vonkajšom ráme šikmej plochy nákladovej plošiny - Na profilovanej oceľovej doske na labuti a na nákladovej plošine je nanesená vrstva piesku ako protisklzová ochrana - Centrálny maza

Stav: použitý, pohotovostná hmotnosť: 10 350 kg, maximálna hmotnosť nákladu: 37 650 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 10/2018, dĺžka ložného priestoru: 8 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 245/70 R 17,5, farba: oranžová, Rok výroby: 2018, prevádzková hmotnosť: 10 350 kg, Výbava: ABS,

Stav: nový, pohotovostná hmotnosť: 15 420 kg, maximálna hmotnosť nákladu: 61 080 kg, celková hmotnosť: 76 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 900 mm, veľkosť pneumatiky: 235/75/r17,5, farba: sivý, Výbava: ABS, Gooseneck: Gooseneck with rear bevel of approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading Area: Extendable loading area with rear bevel of approx. 500 mm x 8° 8 pairs of folding outward lashing rings 1 pair of flat lashing rings at the front of the loading area Cutouts in the outer frame of the loading area for securing load straps Approx. 48 mm thick hardwood flooring, non-slip checker plate cover above the axles Two-piece Steel Ramps: One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering. Ramp parts are hydraulically foldable, equipped with hydraulic lifting mechanism and hydraulic lateral adjustment. Maximum load per pair: 50,000 kg. Landing Legs: • JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: BPW axles and suspension, 4th and 5th axle steering Technical axle load: 12,000 kg 4th and 5th axles with electromagnetic reverse lock activated via reverse gear and manual operation Tyres 235/75 R 17.5 3PMSF Braking System: Braking system according to EU regulations with EBS-E (4S3M) Sockets and Lighting: Electrical system according to EU regulations, 24-volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets Connections according to ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paintwork: First-class and durable corrosion protection, achieved by standard shot-blasted welded frame with a 2-component (2K) zinc dust primer High-quality single color 2-component (2K) topcoat in MB 7350 Novagrau Rear section metallized and painted in RAL 9010 (Pure White) Metallic lacquer not available Steel Structure: Steel construction made from high-strength fine-grained steels Steel grades: Hnsdpfxsl Sl Izs Aprjr S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Accessories: One spare wheel with bracket in front of the bulkhead 2" kingpin Galvanized steel front wall approx. 400 mm high Yellow-red air couplings on the galvanized front connector strip 2 wheel chocks with holders on the front wall Provision at the rear of the gooseneck for ALU drive-on ramps Bracket for a beacon at the rear of the trailer Galvanized supports under the rear bevel of the loading area White reflector tape according to EU regulations on the sides, at the extension and rear red Electro-hydraulic unit at the rear under the loading area On gooseneck and rear panel (left and right) bracket for warning signs incl. socket Control valves for the ramps installed on the right side of the trailer A mud flap at the rear of the trailer Manual and description on USB stick 3.5" kingpin supplied loose On the gooseneck, plug-in ALU side walls and rear wall approx. 2,440 x 400 mm (LxH) Rear galvanized plug-in stakes are removable (Length of the structure approx. 2,560 mm) 3 pairs of WADER container pockets on the loading area for one 20' (30') or a 40' container 6 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading area Galvanized extensions, extendable by approx. 230 mm per side Lifting axle on the front axle, control via TEBS-E depending on current axle load and loading status Square climb strips 20 x 20 mm, every 200 mm on the outer frame of the loading area bevel On the checker plates, above the kingpin and the loa

Stav: nový, pohotovostná hmotnosť: 11 000 kg, maximálna hmotnosť nákladu: 38 500 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Neck (Gooseneck): - Gooseneck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading Platform: - Telescopic loading platform with rear chamfer approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm - Wheel recesses with 15 x 15 mm square climbing strips and widenings in the lower area - Between the 1st and 2nd axle a pair of fixed wheel recesses with cover, approx. 1,610 x 970 x 400 mm - Recess in the chamfer and protruding into the loading platform for the reception of an excavator dipper stick approx. 2,900 x 750 x 210/290 mm - 1 pair of horizontal lashing rings at the front of the platform (LC 10,000 daN) - 5 pairs of fold-out lashing rings (LC 5,000 daN) - 2 pairs of fold-out lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) - Cutouts in the outer frame of the platform for securing straps (LC 2,000 daN) Hsdpoup U Hzefx Aprsnr - incl. 3-piece removable galvanized covers over the wheel recesses – max. point load 3.5 t / each Two-Part Steel Ramps: - One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood planking - Ramp with hydraulically folding ramp sections, hydraulic lifting system, and hydraulically adjustable position Axles and Tyres: - BPW axles and suspension, 2 axles fixed, 1 axle self-steering - Technical axle load: 12,000 kg - Electromagnetic reverse lock, operable via reverse gear and manually - Air suspension with lifting and lowering valve - Axle tools - Tyres 235/75 R 17.5 - TPMS tire pressure monitoring system according to ECE R 141 Accessories included: - On the gooseneck and at the rear, left and right, each with a mount for warning signs including socket - One spare wheel - 2" king pin - One galvanized steel front wall approx. 400 mm high - Front galvanized connection rail with yellow-red air couplings - 4 wheel chocks - Galvanized extendable widenings, approx. 230 mm each side - Galvanized folding supports under the platform chamfer - One holder for a revolving beacon at the rear of the trailer - Cover plates to bridge the gap between ramps and platform - White reflector tape on sides and extension; rear in red, per EU regulations - Electro-hydraulic unit at the rear under the platform - Controls for ramps mounted on the right side of the trailer - European reflective warning signs (red-yellow) at the rear of the trailer - Four approx. 400 mm extendable warning panels, approx. 423 x 423 mm, each with a position light - Mount for revolving beacon on the warning panels - Aluminium plug-in drop sides and rear wall on the gooseneck, approx. 2,440 x 400 mm - Removable rear galvanized stanchions (body length approx. 2,560 mm) - 2 pairs of WADER container locks recessed into the platform for one 20ft or 30ft container - 3 pairs of stanchion pockets 100 x 50 mm on the outer frame of the platform - One removable galvanized intermediate table with 1 pair of WADER container locks - 20 x 20 mm square climbing strips every 200 mm on the outer frame of the platform chamfer - Painted sand layer on the tread plates on the gooseneck and the loading platform as anti-slip coating - 80 km/h speed stickers at the rear and both sides - Load manometer for determining the axle loads, including load diagram

Stav: nový, pohotovostná hmotnosť: 12 300 kg, maximálna hmotnosť nákladu: 37 200 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R17.5, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 30 mm thick hardwood flooring Two-part steel ramps: - One pair of galvanized two-part steel ramps, approx. 3,185 x 1,420 x 1,250 mm, with grating surface - Ramps with hydraulically folding ramp sections, hydraulic lifting mechanism Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings - 30 mm thick hardwood flooring Two-part steel ramps: - One pair of galvanized two-part steel ramps, approx. 3,185 x 1,420 x 1,250 mm, with grating surface - Ramps with hydraulically folding ramp sections, hydraulic lifting mechanism - Maximum load per pair: 30,000 kg Loading platform: - Loading area with rear chamfer approx. 1,000 mm x 8° - Approx. 48 mm thick hardwood flooring, patterned steel plate covering above the axles Axles and tires: - BPW axles and suspension, two fixed axles, one self-steering axle - Air suspension with lifting and lowering valve - The self-steering axles can be locked via electromagnetic reverse gear interlock or manually - 235/75 R17.5 3PMSF tires Accessories included: - 1 spare wheel with holder - TPMS tire pressure monitoring system according to ECE R 141 - 2" king pin - One galvanized steel headboard - Yellow-red air couplings on the galvanized front connection bar - 4 wheel chocks with holders on the front wall - Mounts at the rear end of the gooseneck for ALU loading ramps - 3-height ALU boards - Galvanized folding supports under the chamfered loading area - Height-adjustable tarpaulin body (3,960 mm) - Galvanized headboard with a tensioning mechanism for the sliding curtain - Height adjustable by approx. 400 mm - "EDSCHA" brand roof movable forwards on ALU roof beam profiles, bolted to front and rear walls - 3 pairs of movable stakes in the loading area - The superstructure is hydraulically extendable to the left and right at the rear by approx. 750 mm - Sliding roof with upward-swinging portal beam - Sliding tarpaulin with a 700 mm surplus in length, tensioning straps spaced approx. 600 mm - Height of the top edge of the superstructure approx. 3,960 mm - Operation with roof open is not permitted and will damage the tarpaulin - Cover plates for bridging the gap between ramps and loading platform - Electro-hydraulic power pack at rear, under the loading platform - Holders for warning signs including socket outlets at the gooseneck and at the ramps, left and right - Ramp control valves mounted on the trailer's right side - 6 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading platform - Lifting axle on the front axle - Grating surface in the sloped part of the loading platform C40/4 (point load 3.4 t on an area of 20 x 20 cm) - One INOX toolbox 565 x 290 x 810 mm, right side in driving direction between the axles - Painted sand layer on checker plates on the gooseneck and loading platform as slip protection - BEKAMAX (Pico) centralized lubrication system with NLGI-2 standard grease and removable pump guard - Four pull-out warning panels, approx. 423 x 423 mm, extendable by approx. 400 mm, with position lamp - Load gauge for axle load determination including load diagram Hnodpfx Aotvfkfoprjr - HRM metallization (High Resistance Metallisation) of the outer frame - Entire steel structure shot-peened, then specified visible surfaces hot finished with ZINACOR 850 metallization (Zinc 85% - Aluminium 15%)

Stav: nový, pohotovostná hmotnosť: 13 250 kg, maximálna hmotnosť nákladu: 47 550 kg, celková hmotnosť: 60 800 kg, konfigurácia náprav: 3 nápravy, zavesenie: vzduch, veľkosť pneumatiky: 245/70 r17.5, farba: sivý, Výbava: ABS, Gooseneck: Gooseneck with rear chamfer of approx. 750 mm x 10°. 3 pairs of lashing rings 30 mm thick hardwood flooring Extendable loading platform: Extendable loading platform with rear chamfer of approx. 1,000 mm x 8° 5 pairs of hinged lashing rings (can be folded outward) 3 pairs of hinged lashing rings (can be folded outward) 1 pair of horizontal lashing rings at the front of the loading platform Cutouts in the outer frame of the loading platform for hooking in tensioning straps Hardwood floor approx. 48 mm thick, anti-slip checker plate over the axles Two-part steel ramps: One pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood overlay. Ramps with hydraulically extendable and retractable ramp sections, hydraulic lifting device, and hydraulically adjustable. Maximum load capacity per pair: 40,000 kg Landing legs: JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test capacity) Axles and tires: BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanical forced steering Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tools Tires: 245/70 R 17.5 Brake system: Brake system compliant with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit Steel construction: Steel construction made of high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Paintwork: Top-quality, durable corrosion protection of the standard shot-blasted welded frame guaranteed by a two-component (2K) zinc-rich primer High-quality single-color 2-component (2K) top coat in Nova Grey Rear section metalized and painted in RAL 9010 (pure white) No metallic paints possible Electrical system: Electrical system according to EU specifications, 24 volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets Connection as per ISO 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Hodpfx Aol Uxdkopronr Accessories included: 2" kingpin Galvanized steel front wall approx. 400 mm high Yellow-red air couplings on the galvanized connection bar at the front 4 wheel chocks with holder at the front wall One spare wheel with holder in front of the front wall Electro-hydraulic power pack Remote steering from front and rear via cable remote control with push-button operation and single trace axle control Mount at the rear of the gooseneck for ALU loading ramps European reflective panels (red-yellow) at the rear of the trailer White reflective striping according to EU regulations at the side, at the extension element, and rear in red On the gooseneck and ramps left and right, each with one bracket for warning signs including socket A bracket for a revolving beacon at the rear of the trailer Galvanized folding supports under the chamfer of the loading area Control valves for ramps mounted on the right side of the trailer Cover plates for bridging the gap between ramps and loading area One mudflap at the rear of the trailer Manual and documentation on USB stick Central lubrication system BEKAMAX (Pico) with standard NLGI-2 grease and removable pump guard On the gooseneck, removable ALU side boards and rear board approx. 2,440 x 400 mm Rear galvanized removable stanchions, body length approx. 2,560 mm A toolbox INOX 1,350x400x400 on the gooseneck, box covers oil fill 4 pairs of WADER container locks in the loading platform for one

Stav: nový, maximálna hmotnosť nákladu: 49 000 kg, celková hmotnosť: 60 800 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 r 17.5, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck with chamfered front corners at 45° and rear chamfer of approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable Loading Area: - Extendable loading area with rear chamfer of approx. 1,000 mm x 8° - 5 pairs of fold-out lashing rings on the outside (LC 5,000 daN) - 3 pairs of fold-out lashing rings on the outside (LC 10,000 daN) - 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) - Cut-outs in the external frame of the loading area for attaching tie-down straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, with chequered plate covering over the axles Detachable Two-Part Ramps: - One pair of galvanized, two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood overlay Hnsdpfoh Etf Rox Aprjr - Ramps with hydraulically folding ramp sections, hydraulic lift and hydraulically adjustable side shift - Max. load per pair: 40,000 kg Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and Tyres: - BPW axles, two rigid axles, two self-steering axles, air-suspended, with drum brakes, lifting/lowering function - The self-steering axles can be locked via electromagnetic reverse lock through reverse gear or manually - Axle tools - Tyres: 235/75 R 17.5 Brake System: - Brake system in accordance with EU regulations with EBS-E (4S3M) Steel Construction: - Steel construction made from high-strength fine-grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Paintwork: - Premium and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc-rich primer - High-quality 2-component (2K) topcoat in single-tone Novagrey Electrical System: - Electrical system according to EU regulations, ASPÖCK-NORDIK (ASS3) 24 Volt lighting - ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets Included Accessories: - 2" king pin - One galvanized steel front wall, approx. 400 mm high - One spare wheel with holder in front of the front wall - Yellow and red air couplings on galvanized front terminal strip - 4 wheel chocks with holder on the front wall - Mounting at the rear of the gooseneck for ALU approach ramps - Galvanized folding supports under the chamfered loading area - Bracket for a rotating beacon - Cover plates to bridge the gap between ramps and loading area - White reflective tape according to EU regulations on the sides, red at the rear and on the extension - Electro-hydraulic power unit - At the gooseneck and on the ramps, left and right, each with mounting for warning panels including socket - Control valves for the ramps mounted on the right side of the semi-trailer - Mudflap at the rear of the trailer - User manual and description on USB stick - Removable ALU side boards and rear panel on the gooseneck, approx. 2,440 x 400 mm - Rear galvanized stanchions removable (body length approx. 2,560 mm) - 4 pairs of WADER container pockets in the loading area for a 20 ft, 2x 20 ft or a 40 ft container - 7 pairs of stake pockets for 100 x 50 mm stakes in the external frame of the loading area - Extensions, galvanized, retractable by approx. 230 mm per side - Lift axle on the front axle with control - 20 x 20 mm square climbing strips - BEKAMAX central lubrication system - Four warning panels extendable by approx. 400 mm (approx. 423 x 423 mm)

Stav: nový, maximálna hmotnosť nákladu: 38 100 kg, celková hmotnosť: 50 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 100 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 760 mm, zavesenie: vzduch, veľkosť pneumatiky: 205/65 R17.5 3PMSF, farba: sivý, Výbava: ABS, Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading platform: 5 pairs of folding lashing rings on the outside 3 pairs of folding lashing rings on the outside 1 pair of horizontal lashing rings at the front of the loading platform Cutouts in the outer frame of the loading platform for attaching tie-down straps Approx. 48 mm thick hardwood flooring, over the axles with checker plate covering Landing gear: JOST landing legs with 2-speed gearbox for 24 t lifting capacity Axles and tyres: BPW axles, two fixed and two self-steering axles, air suspension, drum brakes, with raise/lower function The self-steering axles can be locked for reversing via electromagnet, activated through reverse gear or manually Axle tools Hnsdpotphtmjfx Aprjr Tyres 205/65 R17.5 3PMSF Braking system: WABCO braking system according to EU regulations with EBS-E Steel construction: High-strength fine grain steel frame Steel grades: S355J2+N/S355MC S690QL/S700MC Electrical equipment: Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets Connection in accordance with ISO Paintwork: Premium, durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component zinc dust primer High-quality 2-component top coat, single color in MB 7350 Novagrau Metallic paint not available Rear section metallized and painted in RAL 9010 Standard equipment included: 1 spare wheel 205/65 R 17.5 TPMS tire pressure monitoring system in accordance with ECE R 141 At the galvanized front connection strip: yellow-red air couplings 4 wheel chocks with brackets on the front wall Mounting at the rear of the gooseneck for ALU loading ramps Galvanized folding supports underneath the sloped section of the loading area One bracket for a rotating beacon at the rear of the trailer Height-adjustable curtain structure Galvanized front wall with a tensioning mechanism for the sliding curtains Adjustable height approx. 400 mm "EDSCHA" brand roof, forward-sliding on ALU roof beam profiles, bolted to front and rear walls 3 pairs of sliding stanchions on the loading area The superstructure can be hydraulically extended at the rear left and right by approx. 750 mm Sliding roof with lift-up portal beam Sliding curtain with 700 mm extra length, with tensioning straps approx. every 600 mm Height to top edge of superstructure approx. 3,960 mm Driving with open sliding roof is not permitted and will cause damage to the curtain Hanger bar for ALU loading ramps at the rear of the vehicle On the gooseneck and on the left and right of the rear panel, each with a bracket for warning signs including socket Mudflap at the rear of the trailer European reflective plates at the rear of the trailer 7 pairs of stake pockets for 100 x 50 mm insertable stakes in the outer frame of the loading platform Lifting axle on the front axle controlled by TEBS E depending on current axle load and loading condition Superstructure at the rear with closed ALU swing doors On the checker plate on the gooseneck and loading area, an integrated sand coating to prevent slipping Central lubrication system BEKAMAX with standard grease NLGI-2 and removable pump guard 80 km/h speed stickers at the rear and on both sides Load gauge for axle load determination including load diagram

Stav: nový, maximálna hmotnosť nákladu: 38 800 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5 3PMSF, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck with chamfered front corners at 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable loading platform: - Extendable loading platform with rear chamfer approx. 1,000 mm x 8° - 6 pairs of outward-folding lashing rings (LC 5,000 daN) - 3 pairs of outward-folding lashing rings (LC 10,000 daN) - 1 pair of flat-mounted lashing rings at the front of the loading area (LC 10,000 daN) - Cut-outs in the outer frame of the loading platform for securing straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, over the axles with anti-slip chequer plate Axles and tires: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lowering valve - Axle tools - 235/75 R 17.5 3PMSF Brake system: - WABCO brake system according to EU regulations with EBS-E (2S2M) Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox, 24t lifting capacity (50t test load) Hnedouqlmnspfx Apror Included accessories: - One spare wheel with holder in front of the bulkhead - 2-inch king pin - Galvanized steel bulkhead, approx. 400 mm high - Yellow and red air couplings on the galvanized front connector strip - 4 wheel chocks with holders at the bulkhead - Mount for rotating beacon at the rear of the trailer - Receptacle at the rear of the gooseneck for ALU approach ramps - Galvanized folding supports under the chamfer of the loading platform - Cover plates for bridging the gap between ramps and platform - White reflective tape according to EU regulations on sides, extension, and red at the rear - Electro-hydraulic unit positioned at the rear, under the platform - On the gooseneck and ramps, left and right, mounts for warning signs including power socket - Control valves for the ramps installed on the right side of the trailer - One mud flap at the rear of the trailer - User manual and documentation on USB stick - ALU side walls and rear wall approx. 2,440 x 400 mm on the gooseneck - The rear, galvanized plug-in stanchions are removable (structure length approx. 2,560 mm) - Four extendable warning signs approx. 423 x 423 mm with position light, extendable by approx. 400 mm - 3 pairs of WADER container pockets in the platform suitable for a 20ft, 30ft, or 40ft container - 6 pairs of 100x50 mm stanchion pockets in the external frame of the loading platform - Galvanized side extensions, extendable by approx. 230 mm per side - 20 x 20 mm square lashing rails every 200 mm on the external frame of the platform's chamfer - Anti-slip sand coating, painted on chequer plates above the king pin and on the loading platform - Mount for rotating beacon on warning signs - European reflective boards (red-yellow) at the rear of the trailer - 80 km/h speed stickers at the rear and both sides - Load manometer for axle load measurement including load diagram - HRM metallization (High Resistance Metallisation) of the external frame - Complete steel structure shot-blasted, then all defined visible surfaces hot-metal sprayed with ZINACOR 850 (zinc 85% - aluminum 15%)

Stav: nový, pohotovostná hmotnosť: 7 900 kg, maximálna hmotnosť nákladu: 41 600 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, prevádzková hmotnosť: 7 900 kg, Výbava: ABS, Gooseneck: - Gooseneck with rear taper approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Loading Platform: - Loading platform with rear taper approx. 1,000 mm x 8° - Recess in the sloped section and extending into the loading platform for the excavator bucket stick, approx. 2,900 x 750 x 210/290 mm - Cut-outs in the outer frame of the loading platform for attaching tensioning straps - Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and Tyres: - BPW axles and suspension, 2 fixed axles, 1 trailing-steer axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated by reverse gear and manually - Air suspension with lift and lower valve - TPMS tyre pressure monitoring system according to ECE R 141 - Tyres 235/75 R 17.5 Paintwork: - Complete steel structure automatically shot-blasted after welding with turbine blasting unit - Second blast treatment with corundum for optimal adhesion of the coating system - Final coating with 2 coats of 2K topcoat, single colour in RAL MB 7350 Novagrau - Rims painted silver - Rear section metallised and painted in RAL 9010 (Pure White) - Cavities sealed with special wax Electrical System: - Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) Hnodeunrapspfx Aprsr - ASPÖCK-UNIBOX on the front connector strip with sockets: 2x 7-pin & 1x 15-pin Included Accessories: - Extensive lashing positions - 2" king pin - One galvanised steel front wall approx. 400 mm high - Yellow-red air couplings on the galvanised front connector strip - 4 wheel chocks with holder on the front wall - Mounting at the rear of the gooseneck for ALU loading ramps - Galvanised folding supports under the sloped rear section of the loading platform - A holder for a beacon at the rear of the trailer - Galvanised, extendable side extensions approx. 230 mm each side - White reflective tape on the sides and red on the rear in accordance with EU regulations - At the gooseneck and rear plate, left and right, each with a holder for warning plates including socket - On the gooseneck, plug-in ALU side and rear boards approx. 2,440 x 400 mm - The rear, galvanised stakes are removable - 2 pairs of WADER container locks in the loading platform for a 20 ft container - 6 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the loading platform - Sliding mounting rail for ALU loading ramps at the rear of the vehicle - 20 x 20 mm square climbing strips every 200 mm on the outer frame of the sloped section of the loading platform - Painted-on sand coating as anti-slip protection on the checker plates of the gooseneck and the loading platform - Four warning plates extendable by approx. 400 mm, approx. 423 x 423 mm each, with position light - Holder for beacon on the warning plates - 80 km/h speed stickers on the rear and on both sides - European reflective panels (red-yellow) at the rear of the trailer - Manual and documentation on USB stick - HRM metallisation (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then the defined visible areas are hot-finished with ZINACOR 850 metallisation (zinc 85% - aluminium 15%)

Stav: nový, pohotovostná hmotnosť: 10 350 kg, maximálna hmotnosť nákladu: 39 150 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Výbava: ABS, Swan neck: - Swan neck with rear bevel approx. 750 mm x 10° Hedpfx Ajiu Er Ajpronr - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood floor, 30 mm thick Loading area: - Telescopic loading platform with rear bevel, approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm - Wheel recesses with square climbing bars 15 x 15 mm and widened sections at the bottom - Between 1st and 2nd axle: 1 pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm - 3-part removable galvanized covers over the wheel recesses (W 670 mm) – max. point load 5 t each - Recess in the rear bevel as well as into the loading area for excavator bucket stick storage, approx. 2,900 x 750 x 210/290 mm - 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN) - 5 pairs of outward-folding lashing rings (LC 5,000 daN) - 2 pairs of outward-folding lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) - Cutouts in the outer frame of the platform for attaching tie-down straps (LC 2,000 daN) One-piece ALU ramps: - One pair of one-piece ALU ramps approx. 2,500 x 600 mm - Ramp with spring lifting mechanism, manually adjustable - Maximum load per pair: 24,000 kg Axles and tires: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated automatically via reverse gear and manually - Air suspension with lift and lower valve - Axle tools - Tires 235/75 R 17.5 - TPMS tire pressure monitoring system according to ECE R 141 Accessories included: - 1 spare wheel with holder in front of the headboard - 2-inch king pin - 1 galvanized steel headboard, approx. 400 mm high - Yellow-red air couplings to the galvanized connection rail at the front - 4 wheel chocks with holders on headboard - ALU ramp storage at the rear of the swan neck - Galvanized extendable width extensions, extendable by approx. 230 mm per side - Galvanized folding supports under rear bevel of loading area - 1 beacon mounting bracket at trailer rear - White reflector tape according to EU regulations on the sides; red on extension and rear - Swan neck and rear panel each with 1 holder for warning signs incl. socket, left and right - On swan neck: ALU drop-in side panels and rear panel, approx. 2,440 x 400 mm - The rear galvanized drop-in stakes are removable (superstructure length approx. 2,560 mm) - 2 pairs of WADER container pockets in platform for one 20ft or 30ft container - 3 pairs of stake pockets 100 x 50 mm in outer frame of platform - 1 removable galvanized intermediate table with 1 pair of WADER container pockets - Square climbing bars 20 x 20 mm every 200 mm on the outer frame at platform's rear bevel - Anti-slip sand finish painted onto tread plates on swan neck and loading area - Four extendable warning signs approx. 423 x 423 mm, extendable by approx. 400 mm, each with position light - Warning signs equipped with bracket for beacon - 80 km/h speed stickers on rear and both sides - Load pressure gauge for axle load determination including load chart - HRM metallization (High Resistance Metallisation) of outer frame - Complete steel structure shot-blasted, then all defined visible areas metallized with ZINACOR 850 (zinc 85% - alu 15%) via hot finishing

Stav: nový, pohotovostná hmotnosť: 9 300 kg, maximálna hmotnosť nákladu: 30 100 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 8 600 mm, šírka ložného priestoru: 2 540 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R17.5, Výbava: ABS, Labutia krku: •Labutia krku so zadným skosením cca 750 mm x 10° •3 páry uväzovacích krúžkov (LC 5 000 daN) •Tvrdodrevo, hrúbka 30 mm Ložná plocha s vysúvacou konštrukciou: •Ložná plocha s vysúvacou konštrukciou so zadným skosením cca 1 000 mm x 8° •5 párov uväzovacích krúžkov, výklopných vonkajškom (LC 5 000 daN) •3 páry uväzovacích krúžkov, výklopných vonkajškom (LC 10 000 daN) •1 pár uväzovacích krúžkov, horizontálne umiestnených vpredu v ložnej ploche (LC 10 000 daN) •Výrezy v vonkajšom ráme ložnej plochy na uchytenie napínacích pásov (LC 2 000 daN) •Tvrdodrevo, hrúbka cca 48 mm, na ložnej ploche nad osami je profilovaná oceľová doska Nápravy a pneumatiky: •Nápravy BPW, hydromechanicky riadené •Technická nosnosť nápravy: 12 000 kg •Vzduchové odpruženie s ventilom na zdvíhanie a spúšťanie •Systém kontroly tlaku v pneumatikách TPMS podľa normy ECE R 141 •Pneumatiky 235/75 R17.5 3PMSF Lakovanie: •Kompletná oceľová konštrukcia po zváraní je automaticky ošetrená pomocou tryskacej kabíny •Druhé tryskacie ošetrenie korundom pre optimálnu priľnavosť systému náterov •HRM metalizácia celého rámu vozidla pomocou ZINACOR 850 (85 % zinku / 15 % hliníka) pre zabezpečenie najlepšej ochrany proti korózii •Finálny náter 2 vrstvami 2K vrchného laku, jednofarebný v odtieni DB 7350 Novograu •Zadná časť metalizovaná a lakovaná v odtieni RAL 9010 (čistá biela) •Test odolnosti laku v soľnej hmle podľa normy ISO 9227-NSS •Zatavenie dutín špeciálnym voskom Elektrický systém: •Elektrický systém podľa noriem EÚ, osvetlenie 24 V ASPÖCK-NORDIK (ASS3) •Všetky bočné obrysové svetlá blikajú synchronizovane s smerovkami •ASPÖCK-UNIBOX na prednej spojovacej lište so zásuvkami 24N, 24S a 15-pólovou zásuvkou Príslušenstvo, súčasť dodávky: •2" kráľovský čap •Jedna pozinkovaná oceľová čelná stena, výška cca 400 mm •Na pozinkovanej prednej spojovacej lište sú žlto-červené vzduchové spojky •2 kusy blokovacích klinov s držiakom na čelnej stene •Jedna náhradná pneumatika s držiakom pred čelnou stenou •Elektrohydraulická agregátna jednotka •Pomocné riadenie, ovládané zpredu a zozadu pomocou diaľkového ovládania pomocou káblov a tlačidiel, s kontrolou jazdy jednou stopou •Európske reflexné značky (červeno-žlté) na zadnej strane prívesu •Biela reflexná páska podľa noriem EÚ na bočnej strane a na vysúvacej časti, vzadu červená •Na labutí krku a na zadnej strane vľavo a vpravo je jeden držiak na výstražné tabule, vrátane zásuvky •Posuvná spojovacia lišta pre hliníkové nájazdové rampy na zadnej strane vozidla •Pozinkované výklopné podpery pod skosením ložnej plochy •Jedna ochrana proti striekajúcej vode na zadnej strane prívesu •Návod na použitie a popis •Centrálne mazacie zariadenie BEKAMAX (Pico) s bežným mazivom NLGI-2 a odnímateľnou ochranou okolo čerpadla •Na labutí krku sú hliníkové bočné steny a zadná stena, ktoré sa dajú zapojiť, cca 2 440 x 400 mm •Zadné pozinkované bočné steny sú odnímateľné (dĺžka nadstavby cca 2 560 mm) Hnedezr Egdjpfx Aprsr •3 páry držiakov pre kontajnery WADER v ložnej ploche pre 1 x 20 ft, 1 x 30 ft alebo 1 x 40 ft kontajner •6 párov držiakov na bočné steny pre bočné steny 100 x 50 mm vo vonkajšom ráme ložnej plochy •Jedna skrinka na náradie INOX 1 500 x 390 x 810 pod ložnou plochou, na pravej strane v smere jazdy •Štyri výstražné tabule, ktoré sa dajú vysunúť cca o 400 mm, cca 423 x 423 mm s kontrolkou •Diaľkové ovládanie pre pomocné riadenie, okrem ovládania pomocou kábla, s kontrolkami na prijímači pre kontrolu jazdy jednou stopou •Na profilovanej oceľovej doske

Stav: nový, pohotovostná hmotnosť: 9 300 kg, maximálna hmotnosť nákladu: 30 100 kg, celková hmotnosť: 39 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 8 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R17.5, Výbava: ABS, Gooseneck: - Gooseneck with rear bevel of approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Extendable loading platform: - Loading platform in extendable design with rear bevel of approx. 1,000 mm x 8° - 5 pairs of foldable external lashing rings (LC 5,000 daN) - 3 pairs of foldable external lashing rings (LC 10,000 daN) Hjdpfx Apoyxc Eyorsnr - 1 pair of flat lashing rings at the front of the loading platform (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, checker plate covering over the axles Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and tyres: - BPW axles, hydro-mechanically forced-steered - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Axle tools - TPMS tyre pressure monitoring system according to ECE R 141 - Tyres 235/75 R17.5 3PMSF Accessories included: - 2" king pin - One galvanised steel front bulkhead, approx. 400 mm high - Yellow-red air couplings on galvanised supply line at the front - 2 wheel chocks with holder at the front bulkhead - One spare wheel with holder in front of the front bulkhead - Electro-hydraulic power unit - Steering override, operated from front and rear via cable remote control with push buttons, with single-track axle control - European reflector boards (red-yellow) at the rear of the trailer - White reflective tape according to EU regulations on the sides and on the extension, red at the rear - On the gooseneck and at the rear, left and right, each a bracket for warning signs, including socket - Sliding bracket for aluminium approach ramps at the rear of the vehicle - Bracket for a rotating beacon at the rear of the trailer - Galvanised folding supports beneath the rear bevel of the loading platform - One mud flap at the rear of the trailer - Manual and documentation on USB stick - BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and removable protection for the pump - On the gooseneck, plug-in aluminium side and rear walls approx. 2,440 x 400 mm - The rear galvanised plug-in stanchions are removable (body length: approx. 2,560 mm) - 3 pairs of WADER container pockets in the loading platform for 1x 20ft, 1x 30ft or 1x 40ft container - 6 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the loading platform - INOX toolbox 1,500 x 390 x 810 under the loading platform on the right (in direction of travel) - Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm with a position light - Bracket for rotating beacon mounted on the warning signs - Radio remote control for steering override, in addition to cable remote control, with indicator lights on the receiver for single-track control - Anti-slip sand coating painted onto the checker plates on the gooseneck and on the loading platform - 80 km/h speed stickers at the rear and both sides - Load gauge to determine axle loads, including load diagram

Stav: nový, pohotovostná hmotnosť: 12 000 kg, maximálna hmotnosť nákladu: 54 000 kg, celková hmotnosť: 66 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 245/70 R 17.5, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable loading platform design: - Extendable loading platform with rear chamfer approx. 1,000 mm x 8° - 5 pairs of fold-out lashing rings (LC 5,000 daN) - 3 pairs of fold-out lashing rings (LC 10,000 daN) - 1 pair of recessed lashing rings in the front loading area (LC 10,000 daN) - Cut-outs in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) - Hardwood flooring approx. 48 mm thick, over the axles with tread plate covering Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox, 24 t lifting capacity (50 t test load) Brake system: - WABCO braking system compliant with EU regulations with EBS-E (4S3M) Steel structure: - Steel structure made from high-strength fine-grained steels Axles and tyres: - BPW axles and suspension, 1st axle rigid, all other axles hydro-mechanically forced-steered - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Axle tool - TPMS tyre pressure monitoring system in accordance with ECE R 141 - Tyres 245/70 R 17.5 3PMSF Accessories included: - 2" king pin - Galvanised steel front wall approx. 400 mm high Hnedpoykpbkofx Apror - At the galvanised front connection plate: yellow-red air couplings - 4 wheel chocks with holder on the front wall - 1 spare wheel with holder in front of the front wall - Electro-hydraulic power unit - Forced steering, front and rear, operated via cable remote control with push buttons, with tracking control for the axles - European reflector plates (red-yellow) at the rear of the trailer - White reflective tape on the sides and the extension, red at the rear, in accordance with EU regulations - On gooseneck and rear left and right: holder for warning boards including socket - Galvanised, extendable width extensions, ca. 230 mm per side - Holder for beacon at the rear of the trailer - Galvanised folding supports under the rear chamfer of the loading platform - Mudflap at the rear - Operating manual and description on USB stick - Central lubrication system BEKAMAX (Pico) with standard lubrication grease NLGI-2 and removable guard around the pump - Plug-in ALU side boards and rear board on the gooseneck approx. 2,440 x 400 mm - Rear galvanised stakes are removable (body length approx. 2,560 mm) - INOX toolbox 1,350x400x400 on the gooseneck (note: box covers oil filler cap) - 4 pairs of WADER container pockets in the loading area for 1x 20ft, 2x 20ft, 1x 40ft, or 1x 45ft container - 7 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area - Sliding hook-in crossbar for ALU drive-on ramps at the rear - Square climbing bars 20 x 20 mm every 200 mm on the outside frame of the rear chamfer - Lift axle on the front axle with control via TEBS-E depending on axle load and current loading condition - Four warning boards extendable by approx. 400 mm, approx. 423 x 423 mm with a position light - Holder for beacon on the warning boards - Radio remote control for forced steering, in addition to cable remote, with indicator lights on receiver as single-track control - Non-slip sand coating painted onto tread plates on gooseneck and loading area - Speed stickers 80 km/h at the rear and on both sides - Load gauge for determining axle loads, including load diagram

Stav: nový, pohotovostná hmotnosť: 12 700 kg, maximálna hmotnosť nákladu: 45 800 kg, celková hmotnosť: 58 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 550 mm, celková šírka: 2 550 mm, celková výška: 855 mm, zavesenie: vzduch, veľkosť pneumatiky: 245/70 R17.5, farba: sivý, Výbava: ABS, Labutia typu "husí krk", pevná, s prostrednou rúrkou: - Predné rohy 90° - Uzavretý vonkajší rám s výrezmi pre upevňovacie pásy - Lišta s otvormi pre hliníkové nájazdové rampy - 2" kráľovský čap - Mechanicky ovládané podpery BPW na zadnej náprave v smere jazdy vpravo - 550 mm dlhé, 8° naklonené na konci labutieho krku Hodpszt Ic Rjfx Apronr - 3 páry upevňovacích očiek LC 5 000 daN zapustených v ložnej ploche labutieho krku - 2 páry vreck pre nosníky 100 x 50 mm v ložnej ploche labutieho krku Ložná plocha s vysúvacou časťou a dvoma jamami pre kolesá: - Uzavretý vonkajší rám s výrezmi pre upevňovacie pásy - Pevná predná časť 360 mm - Povrch podlahy z plechu s protišmykovou vrstvou - Jama pre nakladač vrátane pozdĺžnych otvorov na zaistenie nákladu - 1 pár pevne inštalovaných jam pre kolesá pred prvou nápravou, hĺbka 390 mm vrátane lezečiek na naklonenej časti - 1 pár pevne inštalovaných jam pre kolesá medzi prvou a druhou nápravou, hĺbka 390 mm, vrátane lezečiek na naklonenej časti - Technicky maximálny vysúvací rozsah 3 340 mm - Hliníkový kryt jam pre kolesá „Premium“, celková šírka 600 mm, rozšíriteľná na 3 000 mm s 8 t nosnosťou na koleso - Rôzna hĺbka jam pre kolesá pomocou krytu jam pre kolesá (hĺbka cca: 390 mm a 260 mm) - Naklonená zadná časť vozidla 8°, dĺžka 550 mm - Konštrukcia s lyžinami pre jednoduchú inštaláciu a demontáž nájazdových ramp - Mechanické, pružinou podporované komfortné bočné podpery na zadnej časti vozidla na podopretie počas nakladania - Brzdové blatníky na zadnej časti - 1 pár upevňovacích bodov LC 10 000 daN v strede ložnej plochy za labutím krkom - 1 pár upevňovacích bodov LC 10 000 daN v strede na začiatku ložnej plochy - 1 pár upevňovacích bodov LC 10 000 daN v strede v zadnej časti ložnej plochy - 7 párov upevňovacích bodov LC 10 000 daN vo vonkajšom ráme ložnej plochy - 5 párov vreciek pre nosníky 100 x 50 mm vo vonkajšom ráme ložnej plochy Nájazdové rampy, 2-dielne: - D x Š 4 300 mm x 800 mm - Nosnosť 38 t; povrch podlahy z jedle - Integrovaná mechanická západka v hydraulickom valci nájazdovej rampy na zaistenie rampy v prepravnej polohe - Ovládanie rampy: hydraulický zdvih a posúvanie - Štandardná manuálna ovládacia jednotka pre zadnú funkciu (rampové zdvíhadlo, podpery, posúvanie) - Diaľkové ovládanie na ovládanie zadných funkcií - Elektro-hydraulická jednotka na ovládanie rampy Štvornápravový podvozok a pneumatiky: - Výrobca náprav BPW ECO Max, vzduchové odpruženie - Dvojité pneumatiky 245/70 R17,5 s 12 t nosnosťou na nápravu - Systém monitorovania tlaku v pneumatikách (TPMS) so senzorom tlaku v pneumatikách, ktorý je namontovaný na ráfiku - 3 nápravy s hydraulickým núteným riadením Goldhofer a 1 pevná náprava - Brzdový systém od výrobcu Knorr (podľa noriem EÚ s EBS-E) - TIM G2 od Knorr (modul informácií pre príves) - Systém stabilizácie vozidla RSS (Roll Stability Support) - Štandardne druhá výška ložnej plochy na 895 mm (-100/+100) - Ovládanie pomocnej nápravy pomocou diaľkového ovládania - Vrátane funkcie jazdy v jednej koľaji - Náprava s naklonením závislým od zaťaženia na prvej náprave, vrátane asistencie pri rozjazde Príslušenstvo v cene: - Čelná stena vrátane parkovacej polohy pre zadnú stenu, výška 400 mm - Hliníkové bočnice cca 400 mm vysoké, pozostávajú z 2 bočných bočníc, dĺžka cca 3 150 mm a zadná bočnica s nosníkmi (pozinkované) - Držiak náhradného kolesa na labutím krku, vrátane náhradného kolesa - 2 páry klinov vrátane držiaka - Podpery na rozšírenie na 3 000 mm - 2 páry výstražných tabúľ 423 mm x 423 mm,

Stav: použitý, pohotovostná hmotnosť: 10 600 kg, maximálna hmotnosť nákladu: 39 400 kg, celková hmotnosť: 50 960 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 09/2024, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 760 mm, zavesenie: vzduch, veľkosť pneumatiky: 205/65 R17.5, farba: sivý, Rok výroby: 2024, prevádzková hmotnosť: 10 600 kg, Výbava: ABS, Labuťový krk: -Labuťový krk s obložením z tvrdého dreva, hrúbka 30 mm -Zadná časť labuťového krku v priamej verzii -3 páry upevňovacích očiek (LC 5 000 daN) Ložná plocha v zasúvateľnej verzii: -Ložná plocha v zasúvateľnej verzii -5 párov upevňovacích očiek, sklopných vonkajšou stranou (LC 5 000 daN) -3 párov upevňovacích očiek, sklopných vonkajšou stranou (LC 10 000 daN) -1 pár upevňovacích očiek umiestnených vodorovne v prednej časti ložnej plochy (LC 10 000 daN) -Výrezy vo vonkajšom ráme ložnej plochy na pripevnenie napínacích pásov (LC 2 000 daN) -Obloženie z tvrdého dreva, hrúbka cca 48 mm, na ložnej ploche nad nápravami profilované oceľové plechy Podpery pre sedlo: -JOST podpery pre sedlo (mechanické) s 2-stupňovou prevodovkou pre 24 t nosnosť (50 t skúšobná nosnosť) Nápravy a pneumatiky: -Nápravy BPW, dve nápravy pevné, dve nápravy s nakláňaním -Vzduchové odpruženie, s bubnovou brzdou, s funkciou zdvíhania/spúšťania -Nakláňané nápravy s elektromenetickým systémom blokovania pri cúvaní, aktivovateľným prostredníctvom spiatočky alebo manuálne -Pneumatiky 205/65 R17.5 Brzdový systém: -Brzdový systém v súlade s predpismi EÚ, EBS-E (4S3M) Oceľová konštrukcia: -Oceľová konštrukcia z vysoko pevnej jemnozrnnej ocele -Druhy ocele: -S355J2+N/S355MC (medza pružnosti 355 MPa) -S690QL/S700MC (medza pružnosti 690 MPa) Elektrický systém: -Elektrický systém v súlade s predpismi EÚ, osvetlenie 24 V, ASPÖCK-NORDIK (ASS3) -ASPÖCK-UNIBOX na prednom pripojovacom paneli so zásuvkami 24N, 24S a 15-pólovou zásuvkou Lakovanie: -Prvotriedna a odolná antikorózna ochrana štandardne pieskovaného zvarovaného rámu, zaručená 2-zložkovou (2K) zinkovou základnou vrstvou -Kvalitná 2-zložková (2K) finálna vrstva laku, jednofarebná, v odtieni Novagrau Dodatočné vybavenie v cene: -Jedna rezerva s držiakom pred čelnou stenou -2" kráľovská spojka -Pozinkovaná oceľová čelná stena, výška cca 400 mm -Žlto-červené vzduchové spojky na pozinkovanom pripojovacom paneli vpredu -4 kusy blokovacích klinov s držiakom na čelnej stene -Pozinkované výklopné podpery pod skosenou časťou ložnej plochy -Držiak pre výstražné svetlo na zadnej časti prívesu -Rozšírenia, pozinkované, zasúvateľné o cca 230 mm na každú stranu -Biela reflexná páska v súlade s predpismi EÚ, na boku, na vysúvateľnej časti a vzadu červená -Na labuťovom krku a na zadnom plechu, na ľavej a pravej strane, po jednom držiaku pre výstražné tabule vrátane zásuvky -Jedna ochrana proti striekajúcej vode na zadnej časti prívesu -Európske reflexné tabule (červeno-žltá) na zadnej časti prívesu -Používateľská príručka a popis na USB pamäti -Systém monitorovania tlaku v pneumatikách TPMS podľa normy ECE R 141 -Na labuťovom krku zásuvné bočné a zadné steny z hliníka, rozmery cca 2 440 x 400 mm -Zadné, pozinkované zásuvné rámy sú odnímateľné, dĺžka konštrukcie cca 2 560 mm -7 párov držiakov pre kontajnery WADER -1x 20-stopový kontajner v ložnej ploche; 1x 40-stopový kontajner v ložnej ploche; 1x 40-stopový kontajner nad labuťovým krkom; 2x 20-stopové kontajnery -7 párov držiakov pre zásuvné rámy 100 x 50 mm vo vonkajšom ráme ložnej plochy -Zdvihacia náprava na prednej náprave s ovládaním cez TEBS E v závislosti od aktuálnej hmotnosti nápravy a aktuálneho stavu zaťaženia -Posuvná zásuvná lišta pre hliníkové nakladacie rampy na zadnej časti vozidla -Na profilovaných plechoch na labuťovom krku a na ložnej ploche nanesená vrstva piesku ako ochrana proti kĺzaniu -Štyri výstražné tabule, výsuvné o cca 400 mm, rozmery cca 423 x Hjdpow Adkxofx Aprsnr

Stav: použitý, pohotovostná hmotnosť: 10 100 kg, maximálna hmotnosť nákladu: 38 900 kg, celková hmotnosť: 49 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 09/2025, dĺžka ložného priestoru: 9 200 mm, šírka ložného priestoru: 2 550 mm, veľkosť pneumatiky: 245/70 R 17,5, farba: sivý, Rok výroby: 2025, Výbava: ABS, Ku každému použitému návesu získate aktuálnu a kompletnú inšpekčnú a funkčnú správu. Podvozok: -Pevná zváraná konštrukcia z oceľového rámu s predným zalomením rámu a rovným ložným priestorom so skosením vzadu cca 500x100 mm -Rámový krk 200 mm so skosenými rohmi -Skosený koniec labutej šije cca 500 x 100 mm (stúpacie rebrá na vonkajšom ráme v oblasti zadného skosenia) -2 polohy čapov s vymeniteľným 2" čapom -Vonkajší rám uzatvorený ako dierovaný rám na upevnenie tovaru napínacími pásmi (reťaze nie sú možné) -Zosilnené prevedenie rámu / bodové zaťaženie v ťažisku -Príprava na vysúvateľné rozšírenia ložnej plochy -S rýhou pre bagre (bez krytu), hĺbka cca 220 mm, šírka cca 600 mm, začínajúca cca za 2. nápravou až po koniec vozidla -1 pár vybratí pre kolesá pred nápravou s oceľovými krytmi (povrchová úprava Körapur), hĺbka cca 400 mm, ako aj 1 pár vybratí medzi 1. a 2. nápravou s oceľovými krytmi -Podjazdová ochrana = predĺžený koncový plech -Padacie podpery vzadu Rampen: Hedpjzdzrtofx Apronr -2-dielne najazdové rampy v špeciálnom vyhotovení s mechanickým predĺžením -Dĺžka cca 2 850 mm plus 1 850 mm, s hydraulickým zdvihom rampy (iba v kombinácii s elektrohydraulickou jednotkou) -Šírka cca 800 mm -Drevená pochôdzna vrstva -Vrátane stúpacích rebier na rampách -V dopravnej polohe zaistiteľné napínacími pásmi -Ovládanie pomocou páky namontovanej vzadu vpravo v smere jazdy -Hydraulicky posuvné do strán Podlaha: -35 mm smrekovcová drevená podlaha s hliníkovými omega profilmi Podperné stĺpiky: -Mechanické 24 t podpery s ovládaním z jednej strany a vyrovnaním ťažnej sily Nápravy, riadenie a pneumatiky: -BPW vzduchom odpružené nápravy, každá na 10 t zaťaženia, priemer vankúša 360 mm -S-brzdové bubny 300/200 mm, bezazbestové brzdové obloženie -Automatický napínač tiahla -Zariadenie na zdvíhanie a spúšťanie s celkovým zdvihom cca 200 mm -2. prepravná poloha cez guľový ventil +50 mm -1. náprava je zdvíhateľná (pripojená cez EBS), automatické ovládanie s mechanickým núdzovým spínačom umiestneným na návesu -3. náprava ako brzdovo riadená následná náprava s elektrickou a mechanickou blokáciou -12 oceľových diskových kolies, 10-dierové, s centrovaním v strede -12 pneumatík 245/70 R 17,5 143/141J, bezdušové -Vrátane monitorovania tlaku v pneumatikách Príslušenstvo: -Odnímateľné bočné a zadné steny na labutej šiji cca 400 mm vysoké -Držiak náhradného kolesa -Bočná hliníková ochrana proti podjazdu -4 oporné kliny s držiakom -Pozdĺžny držiak ŠPZ v koncovom plechu -1 ECE tabuľka na zadnej strane -11 párov ZK modulov 10 t na bočnej strane: -2x na labutej šiji -9x na ložnej ploche -Výsuvné výstražné tabuľky vrátane troch pozičných svetiel, vpredu na stĺpikoch a vzadu pred koncovým plechom, plynule výsuvné do šírky 4 500 mm -4 kusy v kapsách na ložnej ploche na výstražné tabuľky -6 párov vreciek na bočných stenách na zasúvacie stĺpiky 100x50 mm -2 rady vreciek na stĺpiky 100x50 mm na labutej šiji od vonkajšieho rámu po hlavný rám (1x pred a 1x za čapy -3 rady vreciek na stĺpiky 100x50 mm na ložnej ploche od vonkajšieho rámu po hlavný rám (1x v prednej časti, 1x pred 1. nápravou a 1x za 3. nápravou) -2 páry oceľových platní na ložnej ploche na kontajnerové zámky na 1x 20ft kontajner -Gumová zástera namontovaná na podjazdovej ochrane

Stav: použitý, číslo stroja/vozidla: W09STLB3NCEN1xxxx, Rok výroby: 2012, Uveďte referenčné číslo pri dopyte: 22956 Technické údaje: Rok výroby: 2012 Otočný na 3. náprave Nadvihovacia 1. náprava Dobré pneumatiky (pozri fotografie) Dĺžka dolnej úrovne: 9,50 m Dĺžka hornej úrovne: 4 m Brzdy v dobrom stave Novo lakované Prázdna hmotnosť: 8910 kg Povolená celková hmotnosť: 50 000 kg Ihneď k dispozícii Hnedpjzqqrpsfx Aprsr Popis: HRD Jumbo náves, 3 nápravy, rok výroby 2012. Podľa majiteľa sú brzdy v dobrom stave. Ihneď k dodaniu. TÜV: Áno EU-schválenie do: 06.05.2027 Vlastná hmotnosť: 8910 kg Celková hmotnosť: 50 000 kg Model: Jumbosemitrailer 3 nápravový = Ďalšie informácie = Pre viac informácií kontaktujte ATS Norway.

Stav: použitý, pohotovostná hmotnosť: 10 100 kg, maximálna hmotnosť nákladu: 38 900 kg, celková hmotnosť: 49 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 07/2025, dĺžka ložného priestoru: 9 200 mm, šírka ložného priestoru: 2 550 mm, veľkosť pneumatiky: 245/70 R 17,5, farba: sivý, Rok výroby: 2025, Ku každému použitému návesu získate aktuálnu a kompletnú inšpekčnú a funkčnú správu. Podvozok: - Stabilná zváraná oceľová rámová konštrukcia s predným prehnutím rámu a rovným ložným povrchom so šikmým skosením v zadnej časti cca 500x100 mm - Krk rámu 200 mm so skosenými rohmi - Šikmý koniec labutieho krku cca 500 x 100 mm (v oblasti zadného skosenia so stúpacími lištami na vonkajšom ráme) - 2 polohy pre kónický čap s vymeniteľným 2“ kónickým čapom - Vonkajší rám uzavretý smerom von ako dierovaný vonkajší rám na upevnenie pomocou upínacích pásov (uchytenie reťazou nie je možné) - Zosilnené prevedenie rámu / bodové zaťaženie v ťažisku - Príprava na výsuvné rozšírenia ložnej plochy - S výrezom na lyžicu rýpadla (bez krytu), hĺbka cca 220 mm, šírka cca 600 mm, približne od 2. nápravy až po koniec vozidla - 1 pár vybratí na kolesá pred nápravou s oceľovými krytmi - (Kryty s povrchovou úpravou Körapur), hĺbka cca 400 mm, ako aj 1 pár vybratí na kolesá medzi 1. a 2. nápravou, oceľové kryty - Podbehová ochrana = predĺžený zadný plech - Zadné padajúce podpery Rampen: - 2-dielne nájazdové rampy v špeciálnom prevedení s mechanickým vysúvaním - Dĺžka cca 2 850 mm plus 1 850 mm, s hydraulickým zdvihom rampy (len v kombinácii s elektrohydraulickou jednotkou) - Šírka cca 800 mm - Drevená podlaha - Vrátane stúpacích líšt na rampách - V prepravnej polohe zaistiteľné upínacími pásmi - Ovládanie pákou namontovanou vzadu na pravej strane v smere jazdy - Bočne hydraulicky posuvné Podlaha: - 35 mm podlaha z modřínu s hliníkovými omega profilmi Podpery: - Mechanické podpery s nosnosťou 24 ton s jednostranným ovládaním a kompenzáciou pohybu Nápravy, riadenie a obutie: - BPW nápravové vzduchové pruženie, každá s nosnosťou 10 ton, priemer vankúša 360 mm - Brzdy s S-pákou 300/200 mm, bezazbestové brzdové obloženie - Automatický napínač ťažného ústrojenstva - Systém zdvíhania a spúšťania s celkovým zdvihom cca 200 mm - 2. jazdná poloha cez guľový kohút +50 mm - Prvá náprava ako zdvíhacia náprava (káblovanie cez EBS), automatické potvdenie s mechanickou núdzovou aktiváciou cez tlačidlo na návesu - Tretia náprava ako pasívne riadená doťahovacia náprava s elektrickým a mechanickým blokovaním - 12 oceľových diskových kolies, 10-dierové, s centrovaním v strede - 12 pneumatík 245/70 R 17,5 143/141J, bezdušové - Vrátane monitorovania tlaku v pneumatikách Príslušenstvo: - Na labutiom krku zasúvateľné bočné steny a zadná stena cca 400 mm vysoké - Držiak rezervného kolesa - Bočná hliníková ochrana proti nárazu - 4 kliny pod kolesá vrátane držiakov - Dlhý držiak na poznávaciu značku v zadnom plechu Hnjdpfxjzabnbs Aprer - 1 zasúvateľná ECE tabuľa vzadu - 11 párov bočných upevňovacích modulov ZK 10 t: -- 2x na labutiom krku -- 9x na ložnej ploche - Výsuvné varovné tabuľky vrátane 3 polohových svetiel na každom konci, vpredu pri podperách a vzadu pred zadným plechom, plynulo výsuvné do šírky ložnej plochy 4 500 mm - 4 držiaky na varovné tabuľky, zasúvateľné do vreciek na ložnej ploche - 6 párov bočných otvorov pre vkladacie stĺpiky 100x50 mm - 2 rady priečnych vreciek na stĺpiky 100x50 mm na labutiom krku od vonkajšieho rámu po hlavný rám (1 pred a 1 za pozíciou kónického čapu) - 3 rady priečnych vreciek na stĺpiky 100x50 mm na ložnej ploche od vonkajšieho rámu po hlavný rám (1 v prednej časti, 1 pred prvou nápravou a 1 za treťou nápravou) - 2 páry oceľových platní v ložnej ploche na uchytenie kontajnerových zámkov pre jeden 20ft kontajner - Gumený záves namontovaný na podbehovej ochrane

Stav: nový, pohotovostná hmotnosť: 15 550 kg, maximálna hmotnosť nákladu: 47 450 kg, celková hmotnosť: 63 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 800 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck in SNT design for optimizing loading area length, approx. 3,700 mm long - Rear gooseneck with approx. 1,000 mm x 10° bevel Loading Area: - Extendable loading area, approx. 8,800 mm in length, with an approx. 500 mm x 10° bevel at the rear - A recess in the loading area and the bevel, designed to accommodate the excavator stick - Pneumatic locking with conical locking bolts and reinforced locking positions - Hardwood decking on the beveled section of the loading area Ramps: - 1 pair of two-part steel ramps, approx. 4,350 mm long and 900 mm wide - Ramps with hardwood decking - Hydraulically foldable ramp ends - Each ramp hydraulically adjustable outwards by approx. 235 mm and inwards by approx. 215 mm - Square climbing bars 20 x 30 mm, positioned approx. every 200 mm on the outer frame of the ramp Axles and Suspension: - BPW axles and suspension, 1st axle steering ahead, all other axles hydromechanically forced steered - Technical axle load: 12,000 kg - 1st axle with electromagnetic reverse lock, activated via reverse gear and also manually Hnjdek Aht Ujpfx Aprjr - Air suspension with lift and lower valve - Twin tires 235/75 R 17.5 - TPMS tire pressure monitoring system according to ECE R141 - TPMS sensors mounted on all wheels including spare wheels Accessories included: - Plug-in steel front wall, approx. 400 mm high - 3kW electro-hydraulic power unit for hydraulic operations, excluding hydraulic winches - Parking location on the gooseneck for warning panels when not in use - 1 spare wheel - On the gooseneck: 1 pair of plug-in anodized ALU side boards, approx. 400 mm high - Plug-in anodized ALU rear board on the gooseneck, approx. 400 mm high - On the gooseneck: approx. 40 mm thick hardwood decking, over the kingpin tread plate covering - 2" kingpin - Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide - 4 wheel chocks - Mechanical landing gear with 2-speed gearbox and crank - JOST Modul B – static test load = 50,000 kg - 1 intermediate table, approx. 300 mm wide - Extendable galvanised outriggers, approx. 230 mm per side - Wheel recesses with square climbing bars - ALU covers for the wheel recesses - 1 pair of mechanical rear supports - Remote steering system operable from the front and rear via cable remote control, with single-track control for axles - 1st axle with automatic lift axle function - Central lubrication system with 1 pump, brand BEKAMAX - Radio remote control for rear steering, additional to the cable remote, with 2 indicator lights on receiver for single-track control - Wabco Smart Board System - 4 warning panels, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and brackets for rotating beacon

Stav: nový, pohotovostná hmotnosť: 10 100 kg, maximálna hmotnosť nákladu: 38 900 kg, celková hmotnosť: 49 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 200 mm, šírka ložného priestoru: 2 550 mm, veľkosť pneumatiky: 245/70 R 17,5, prevádzková hmotnosť: 10 100 kg, Výbava: ABS, Chassis: - Stable welded steel frame construction with front frame drop and flat load area, rear chamfer approx. 500x100 mm - Neck section 200 mm with beveled corners - Tapered end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in the area behind rear chamfer) - 2 kingpin positions with interchangeable 2” kingpin - Outer frame closed outwards with perforated profile for lashing with tension belts (no chains possible) - Reinforced frame version / point load at center of gravity - Provisions for extendable load platform wideners - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting approx. after 2nd axle to end of vehicle - 1 pair of wheel recesses in front of axle with steel covers - (Covers with Körapur coating), depth approx. 400 mm, plus 1 pair of wheel recesses between 1st and 2nd axle with steel covers - Underrun protection = extended end plate - Drop-leg supports at rear Ramps: - 2-piece loading ramps, special design with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting equipment (only in conjunction with electro-hydraulic power pack) - Width approx. 800 mm - Wooden decking - Including traction ribs on ramps - Secured in transport position with tension belts - Operation via control lever mounted rear right in direction of travel - Sideways hydraulically adjustable Floor: - 35 mm larch wood flooring with aluminium omega profiles Landing gear: - Mechanical 24-ton landing legs, single-sided operation with compensating device Axles, steering and tires: - BPW air suspension axles, 10 t axle load each, airbag diameter 360 mm - S-cam brake 300/200 mm, asbestos-free brake pads - Automatic slack adjuster - Lifting and lowering device with total lift approx. 200 mm - 2nd drive height via ball valve +50mm - 1st axle with lifting function (wired via EBS), fully automatic control with mechanical emergency activation via button on trailer - 3rd axle as friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, center-mounted offset - 12 tires 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring Accessories: - Removable side and rear boards on gooseneck approx. 400 mm high - Spare wheel holder - Side aluminum underride protection - 4 wheel chocks - Elongated license plate holder in end plate - 1 ECE removable sign board on the rear - 11 pairs ZK modules 10t at the sides: - 2x on the gooseneck - 9x on the load platform - Metal fenders with clear-pass - Extendable warning plates incl. 3 position lights each, front at landing legs and rear ahead of end plate, steplessly extendable up to load width of 4,500 mm - 4 sockets for warning plates storable in stake pockets on load platform - 6 pairs side stake pockets for 100x50 mm stakes - 2 crosswise rows of stake pockets for 100x50 mm stakes on gooseneck from outer frame to main frame (1 in front and 1 behind kingpin positions) - 3 crosswise rows of stake pockets for 100x50 mm stakes on load platform from outer frame to main frame (1 in front area, 1 in front of 1st axle and 1 behind 3rd axle) - 2 pairs steel plates in load platform for container locks to accommodate 1x 20ft container Hnjdjwviwkopfx Aprer - Rubber apron mounted on underrun protection - Steel shot blasting, chassis hot-dip galvanized and primed - Painting of chassis/wheel hubs/outer frame in DB 7350 Novagrau

Stav: nový, pohotovostná hmotnosť: 10 900 kg, maximálna hmotnosť nákladu: 37 100 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 890 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17.5, farba: sivý, prevádzková hmotnosť: 10 900 kg, Výbava: ABS, Gooseneck: - Gooseneck in SNT design for optimizing the loading platform length, approx. 3,700 mm long, rear chamfer approx. 1,000 mm x 6° - Technical fifth wheel load: 18,000 kg - For tractor units: 4 x 2 and 6 x 2 Loading Platform: - Loading platform approx. 9,600 mm long with rear chamfer approx. 900 mm x 6° - Platform behind gooseneck hydraulically liftable/lowerable, approx. 3,000 mm long, load capacity up to approx. 9,000 kg - Grating and 5 mm steel plate reinforcement on the chamfered section as additional strengthening Ramps: - One pair of two-piece AXS steel ramps, approx. 4,675 mm long, 900 mm wide - Grating surface - Hydraulically foldable ramp tips - Ramps can be hydraulically shifted individually approx. 235 mm outwards and approx. 365 mm inwards - Painted anti-slip sand-coating on ramp outer frame and ramp tip - Flashing lights mounted on ramp tips with switch next to ramp control panel - Quick-release ramp locks for securing in transport position Axles, Suspension, and Tyres: - BPW axles and suspension, 1st and 2nd axles fixed, 3rd axle self-steering - 1st axle with starting aid - Operated via brake pedal of the tractor unit - Technical axle load: 12,000 kg - Air suspension with raise/lower valve - 235/75 R 17.5 - TPMS (Tyre Pressure Monitoring System) to ECE R 141 specification - TPMS sensors fitted in all wheels, including spares Braking System: - WABCO EBS-E braking system complying with EU regulations Paintwork: - Trailer MB 7350 Nova Grey Hsdpfxouadk Ns Apronr Included Accessories: - Pin-type steel front wall, approx. 400 mm high - 3 kW electro-hydraulic power unit for hydraulic operations (excluding hydraulic winches) - Gooseneck guide plate for fifth wheel, approx. 500 mm wide - JOST Modul B landing gear - static test load = 50,000 kg - Continuous grating with 5 mm steel baseplate as additional reinforcement - Painted sand-coating - Cut-outs in outer frame of platform and lift bed for attaching hydraulic ramp control valves on right side of trailer - 2" king pin - Central lubricating system with 1 pump, brand BEKAMAX - On gooseneck: 1 pair removable ALU side walls, approx. 400 mm high, anodized - Electric cable winch, approx. 5,400 kg pulling force, with radio remote control - Steel cable approx. 24 m long, diameter approx. 9.5 mm, incl. cable pressure roller - WABCO Smart Board system - 4 extendable warning boards, approx. 423 x 423 mm, extendable by approx. 400 mm

Stav: nový, pohotovostná hmotnosť: 17 500 kg, maximálna hmotnosť nákladu: 43 500 kg, celková hmotnosť: 61 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 7 550 mm, šírka ložného priestoru: 2 750 mm, výška ložného priestoru: 400 mm, veľkosť pneumatiky: 245/70 R 17.5, farba: sivý, Výbava: ABS, Neck (Gooseneck): Hodpfx Aeh Hm Thsprjnr - Gooseneck in SNT design for optimizing loading platform length, approx. 3,750 mm long - Gooseneck hydraulically liftable/lowerable and detachable - For tractor units: 6x4 or 8x4 Deck (Lowbed): - Lowbed with external beams, extendable design, "SUPER LOW" type, approx. 7,550 mm long - Lowbed with fixed hardwood floor, approx. 40 mm thick, with mechanical locking - Service lines protected and routed within the extendable beams, automatically adjusting to the respective lowbed length Rear chassis: - Rear chassis with closed outer frame, checker plate surface, and continuous prism excavator trough, approx. 1,450/900 x 505 mm, open at the rear - 2 pairs of stake pockets (100 x 50 mm) on the outer frame for plug-in stakes Axles and tires: - "PENDULUM AXLE", all axles forced-steered hydromechanically - Burst pipe valve to axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and plug pin for securing in raised position - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tires 245/70 R 17.5 / 3PMSF Accessories included: - Prepared for mounted container locks for 1x 20ft or 1x 40ft container on outer beams - 2" king pin - One galvanized steel front wall, approx. 400 mm high - One spare wheel with holder - Yellow-red air couplings on the galvanized front connector strip - 4 wheel chocks - Remote steering front and rear operated by wire remote control via pushbuttons, with single-track axle alignment control - Hydraulic couplings between gooseneck and lowbed as multi-coupling instead of screw type - Electro-hydraulic power pack - White reflective tape as per EU regulations on the sides, at the extension and red on the rear - 2 wooden blocks 500x250x200 mm - European reflective warning panels (red-yellow) at trailer rear - On gooseneck and rear section: holders for warning signs with sockets left and right - Central lubrication system with 2 BEKAMAX (Pico) pumps, standard grease NLGI-2 - Load gauge to determine axle loads, incl. load chart - On gooseneck, plug-in aluminum side walls and rear wall approx. 2,000 x 400 mm - Rear galvanized plug-in stakes removable (body length approx. 2,120 mm) - Separate air connection with air gun on the gooseneck - Duomatic air coupling from gooseneck to lowbed - Gooseneck closed at rear upper section with removable cover - 1 pair of steel ramps for bridging the lowbed receptacle hooks - Four approx. 400 mm extendable warning signs, approx. 423 x 423 mm - Radio remote control for rear steering in addition to cable remote, with receiver indicator lights for single-track alignment - 6 pairs threaded blocks between lashing rings under top chord on outer beam for installation of screwable RUD rings VLBG-4 - 7 pairs of stake pockets (100 x 50 mm) in outer frame of load platform - Folding extensions, approx. 230 mm per side - Anti-slip sand coating painted on load platform - Dipper stick trough at front and rear of rear chassis closed with plug-in plates - HRM Metallization (High Resistance Metallization) of the outer frame - Complete steel construction shot-blasted, then defined visible surfaces metallized with ZINACOR 850 (Zinc 85% - Alu 15%) by hot finishing