Faymonville Max Trailer 8-(3+5)-Achs-Tiefbett-Kombi. kúpiť použité (65 112)

Stav: nový, pohotovostná hmotnosť: 34 500 kg, maximálna hmotnosť nákladu: 106 700 kg, celková hmotnosť: 141 200 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 7 150 mm, šírka ložného priestoru: 2 850 mm, výška ložného priestoru: 580 mm, veľkosť pneumatiky: 285/70 R19.5, farba: sivý, prevádzková hmotnosť: 34 500 kg, Výbava: ABS, Gooseneck: - Gooseneck hydraulically liftable/lowerable and detachable - Length approx. 3,650 mm - Extensive lashing positions - For tractor units: 6 x 4 or 8 x 4 3-Axle Compact Front Undercarriage: Iiodpfx Agjwhywfjlja - Hook mountings at front and rear - Undercarriage length x width approx. 3,560 mm x 2,850 mm - Extensive lashing positions Excavator Deck “BB-A”: - Telescopic excavator deck “BB-A” with drive-over deck hooks at the front and pin-lug coupling at the rear - Length x base width approx. 7,150 mm x 2,850 mm - Beam height x width approx. 430 mm x 1,350 mm - Loading height 580 mm with ground clearance of 150 mm - 5 pairs of hanging lashing rings (LC 10,600 daN) - 4 pairs of M30 threaded blocks on the inner beam for mounting screwable rings 5-Axle Rear Undercarriage: - Mechanical pin-lug coupling at the front for low bed attachment; end cross-member at the rear - Undercarriage length x width approx. 6,840 mm x 2,850 mm - Extensive lashing positions Pendulum Axle and Tyres (front and rear undercarriage): - "PENDULUM AXLE", all axles hydro-mechanically forced steered - Hose rupture valve on axle balancing cylinders with automatic RESET function - Hydraulic cylinders fitted with shut-off taps and locking plugs for securing in raised position - Final coating of axles with two layers of 2K paint, single color MB 7350 Novagrau - Technical axle load: 14,640 kg (62 km/h) - Hydraulic axle compensation - Axle tools - Tyres: 285/70 R19.5 Remote Steering (Follow-up Steering): - Remote steering from front and rear operable via cable remote control with push buttons, with axle tracking monitoring - Socket for remote steering operation at the gooseneck - Cable remote control with push buttons including axle tracking monitoring Accessories included: - Yellow-red air couplings on galvanized front connection rail - Steel front wall approx. 400 mm high - 4 wheel chocks with holders - 2 spare wheels 285/70 R19.5 - 3.5" king pin - Boom with winch for spare wheel at gooseneck front - Truck hydraulic connection with flow regulator (40 l/min), including boom for suspending service lines; tractor unit tank must have at least 80 liters capacity with connectors - White reflective tape according to EU regulations on the sides and on the extension, red at the rear - Plug-in ALU side boards and tailgate on the gooseneck, approx. 400 mm high, anodized - Control levers on the gooseneck protected by a foldable cover - Separate air connection with air gun at the gooseneck - Central lubrication system BEKAMAX with standard grease NLGI-2, 1x at the gooseneck, 1x at the 3-axle undercarriage, 1x at the 5-axle undercarriage - Variomax tool kit - Multi-coupling hydraulic connections at low bed hook area - Front undercarriage with separate air connection for pneumatic tools - Threaded insert option (ø 40 mm) every approx. 500 mm on the outer web of the excavator deck for screw rings - Foldable width extensions with steel inlays, adjustable from approx. 2,850 mm to 3,250 mm - Steel inlays with approx. 12 mm thick rubber covering - Two INOX toolboxes 855 x 340 x 390 mm - Radio remote control for steering in addition to cable remote control - Sand layer coating as anti-slip protection - 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery

Stav: nový, maximálna hmotnosť nákladu: 90 700 kg, celková hmotnosť: 126 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 850 mm, Výbava: ABS, Our entire vehicle inventory with immediately and short-term available vehicles can be found on our website. Excerpt from the equipment. Full configuration available on request. Gooseneck: Gooseneck hydraulically lift/lowerable and removable. Length approx. 3,650 mm. For tractor units: 6x4 or 8x4 3-axle compact front bogie: * Hook pickups at front and rear. Length: approx. 3,560 mm * Chassis width: approx. 2,850 mm Lowbed: * ATX-A lowbed with telescopic longitudinal beams in low-profile design with fixed hardwood floor approx. 50 mm thick, * with drive-over bridge hooks at the front and pin-lug coupling at the rear * Base width: approx. 2,850 mm, length: approx. 7,150 mm, beam height: approx. 330 mm, beam width: approx. 750 mm * Loading height approx. 480 mm with ground clearance approx. 150 mm 5-axle rear bogie: * Mechanical pin-lug coupling for mounting a lowbed at the front, rear cross member at the rear * Chassis width: approx. 2,850 mm * Chassis length: approx. 6,840 mm * Pendulum axles 3-axle front bogie: * PENDULUM AXLE, all axles hydro-mechanically forced steered * Hose rupture valve on axle compensation cylinder with automatic reset function * Hydraulic cylinder with shut-off cocks and positioning pins to secure in the raised position * Final coat of axes in 2 coats of 2K paint, solid color, MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Front bogie tires: 12 x as selected by the manufacturer (M+S) 285/70 R19.5, load index 150/148J 5-axle rear bogie: * PENDULUM AXLE, all axles hydro-mechanically forced steered * Hose rupture valve on axle compensation cylinder with automatic reset function * Hydraulic cylinder with shut-off cocks and positioning pins to secure in the raised position * Final coat of axes in 2 coats of 2K paint, solid color, MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Rear bogie tires: 20 x as selected by the manufacturer (M+S) 285/70 R19.5, load index 150/148J Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure optimal corrosion protection * Final coating with 2 coats of 2K topcoat, solid color in RAL 3002 Carmine Red, according to the RAL 841GL system Includes accessories: * Steel front wall, approx. 400 mm high * Plug-in ALU side and rear walls on the gooseneck, approx. 400 mm high, anodized * 3.5" kingpin * BEKA-MAX centralized lubrication for a gooseneck * Multi-coupling hydraulic connections on the gooseneck * Front bogie with separate air connection for air-powered tools * BEKA-MAX centralized lubrication for a 3-axle bogie * Preparation for mounting screw-on container positions for 1 x 20' or 1 x 30' on the outer beams * Without container locks * Recesses on the outside of the loading platform's outer beams for fitting foldable extensions * One 7-pin socket left and right, front and rear on the rear bogie for warning boards * BEKA-MAX centralized lubrication for a 5-axle bogie * At the rear bogie, a socket for the cable remote control of the rear steering Iiedsw Tgp Djpfx Aglja * Rear chassis with trough * 2 LED reversing lights fitted on the rear panel * European warning panels (red-yellow) at the rear * One mud flap at the rear * One LED revolving beacon with bracket left and right on the rear cross member * Two stainless steel toolboxes 855 x 340 x 390 mm on the gooseneck, left and right * 1-cycle ...

Stav: nový, pohotovostná hmotnosť: 17 500 kg, maximálna hmotnosť nákladu: 43 500 kg, celková hmotnosť: 61 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 7 550 mm, šírka ložného priestoru: 2 750 mm, výška ložného priestoru: 400 mm, veľkosť pneumatiky: 245/70 R 17.5, farba: sivý, Výbava: ABS, Neck (Gooseneck): - Gooseneck in SNT design for optimizing loading platform length, approx. 3,750 mm long - Gooseneck hydraulically liftable/lowerable and detachable - For tractor units: 6x4 or 8x4 Deck (Lowbed): - Lowbed with external beams, extendable design, "SUPER LOW" type, approx. 7,550 mm long - Lowbed with fixed hardwood floor, approx. 40 mm thick, with mechanical locking - Service lines protected and routed within the extendable beams, automatically adjusting to the respective lowbed length Rear chassis: - Rear chassis with closed outer frame, checker plate surface, and continuous prism excavator trough, approx. 1,450/900 x 505 mm, open at the rear - 2 pairs of stake pockets (100 x 50 mm) on the outer frame for plug-in stakes Axles and tires: - "PENDULUM AXLE", all axles forced-steered hydromechanically - Burst pipe valve to axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and plug pin for securing in raised position - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tires 245/70 R 17.5 / 3PMSF Accessories included: - Prepared for mounted container locks for 1x 20ft or 1x 40ft container on outer beams - 2" king pin - One galvanized steel front wall, approx. 400 mm high - One spare wheel with holder - Yellow-red air couplings on the galvanized front connector strip - 4 wheel chocks - Remote steering front and rear operated by wire remote control via pushbuttons, with single-track axle alignment control - Hydraulic couplings between gooseneck and lowbed as multi-coupling instead of screw type - Electro-hydraulic power pack - White reflective tape as per EU regulations on the sides, at the extension and red on the rear - 2 wooden blocks 500x250x200 mm - European reflective warning panels (red-yellow) at trailer rear - On gooseneck and rear section: holders for warning signs with sockets left and right - Central lubrication system with 2 BEKAMAX (Pico) pumps, standard grease NLGI-2 - Load gauge to determine axle loads, incl. load chart - On gooseneck, plug-in aluminum side walls and rear wall approx. 2,000 x 400 mm Iodpfoh Hm Thox Agleia - Rear galvanized plug-in stakes removable (body length approx. 2,120 mm) - Separate air connection with air gun on the gooseneck - Duomatic air coupling from gooseneck to lowbed - Gooseneck closed at rear upper section with removable cover - 1 pair of steel ramps for bridging the lowbed receptacle hooks - Four approx. 400 mm extendable warning signs, approx. 423 x 423 mm - Radio remote control for rear steering in addition to cable remote, with receiver indicator lights for single-track alignment - 6 pairs threaded blocks between lashing rings under top chord on outer beam for installation of screwable RUD rings VLBG-4 - 7 pairs of stake pockets (100 x 50 mm) in outer frame of load platform - Folding extensions, approx. 230 mm per side - Anti-slip sand coating painted on load platform - Dipper stick trough at front and rear of rear chassis closed with plug-in plates - HRM Metallization (High Resistance Metallization) of the outer frame - Complete steel construction shot-blasted, then defined visible surfaces metallized with ZINACOR 850 (Zinc 85% - Alu 15%) by hot finishing

Stav: nový, maximálna hmotnosť nákladu: 91 640 kg, celková hmotnosť: 126 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 850 mm, Výbava: ABS, Celý náš vozový park s okamžitě a krátkodobě dostupnými vozidly najdete na našich webových stránkách. Výběr z výbavy. Kompletní výbava na vyžádání. Labutí krk * Hydraulicky zvedatelný/snižovatelný a snímatelný labutí krk. Délka cca 3 650 mm. Pro tahače: 6 x 4 nebo 8 x 4 3-nápravový kompaktní přední podvozek * Uložení háku vpředu a vzadu, délka cca 3 560 mm * Šířka podvozku: cca 2 850 mm Rypadlový most * Teleskopický rypadlový most BB-A s přejezdovými háky vpředu a s čepovým okem vzadu * Základní šířka: cca 2 850 mm, délka: cca 7 150 mm, výška nosníku: cca 430 mm, šířka nosníku: cca 1 350 mm * Ložná výška cca 580 mm při světlé výšce cca 150 mm 5-nápravový zadní podvozek * Mechanická čepová spojka pro připojení hlubokoložného návěsu vpředu, zadní závěs vzadu * Šířka podvozku: cca 2 850 mm * Délka podvozku: cca 6 840 mm * Kyvná náprava 3-nápravová Přední podvozek * Kyvná náprava (Pendel-Achse), všechny nápravy hydro-mechanicky nuceně řízené Iedpfx Agjuvbdteljia * Ventil proti zlomení hadice na vyrovnávacím válci nápravy s automatickou funkcí RESET * Hydraulický válec s uzavíracími kohouty a předinstalačním kolíkem pro zabezpečení ve zvednuté poloze * Konečná povrchová úprava náprav dvěma vrstvami dvousložkového laku v odstínu MB7350 Novagrau * Technická nosnost nápravy: vždy 14 640 kg (62 km/h) * Hydraulické vyrovnávání náprav * Pneumatiky předního podvozku: 12x dle výběru výrobce (M+S) 285/70 R19.5, nosnostní index 150/148J kyvná náprava 5-nápravový zadní podvozek * Kyvná náprava (Pendel-Achse), všechny nápravy hydro-mechanicky nuceně řízené * Ventil proti zlomení hadice na vyrovnávacím válci nápravy s automatickou funkcí RESET * Hydraulický válec s uzavíracími kohouty a předinstalačním kolíkem pro zabezpečení ve zvednuté poloze * Konečná povrchová úprava náprav dvěma vrstvami dvousložkového laku v odstínu MB7350 Novagrau * Technická nosnost nápravy: vždy 14 640 kg (62 km/h) * Hydraulické vyrovnávání náprav * Pneumatiky zadního podvozku: 20x dle výběru výrobce (M+S) 285/70 R19.5, nosnostní index 150/148J Lakování * HRM metalizace celého podvozku vozidla ZINACOR 850 (85 % zinek / 15 % hliník) pro zajištění nejlepší antikorozní ochrany * Závěrečný nátěr dvěma vrstvami dvousložkového laku, jednobarevně v RAL 3002 karmínově červené, dle systému RAL 841GL. Ráfky v odstínu stříbrná šedá Včetně příslušenství * Ocelová čelní stěna, výška cca 400 mm * Nasazovací ALU bočnice a zadní stěna na labutím krku, cca 400 mm vysoké, eloxované provedení * 3,5'' královský čep * BEKA-MAX centrální mazání pro labutí krk * Multispojovací hydraulické přípojky na labutím krku * BEKA-MAX centrální mazání pro 3-nápravový podvozek * Sedmipólová zásuvka vlevo a vpravo vzadu na předním podvozku pro výstražné tabule * Možnost zašroubování (ø cca 40 mm) každých cca 500 mm na horním pásu vnější trubky rypadlového mostu pro šroubovací oka (LC 16 000 daN) * Sklopná rozšíření s ocelovými deskami, nastavitelná na šířku cca 2 850 mm až cca 3 250 mm * Ocelové desky lze vkládat do dvou pozic pro vytvoření snížené ložné plochy. Nosnosti podle šířky viz zatěžovací diagram * Ocelové desky s gumovou povrchovou úpravou ± 12 mm * Sedmipólová zásuvka vlevo a vpravo, vpředu a vzadu na zadním podvozku pro výstražné tabule * BEKA-MAX centrální mazání pro 5-nápravový podvozek * Na zadním podvozku zásuvka pro kabelové dálkové ovládání natáčení náprav * Zadní podvozek s vanou * Dva nerezové nářaďové boxy, cca 855 x 340 x 390 mm, na labutím krku vlevo a vpravo * 1-válcový...

Stav: nový, maximálna hmotnosť nákladu: 40 790 kg, celková hmotnosť: 59 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 750 mm, Výbava: ABS, You can find our complete vehicle inventory, including vehicles immediately and soon available, on our website. Excerpt from the equipment list. Full specification available on request. Gooseneck: - Gooseneck in SNT design to optimize loading area length, approx. 3,700 mm long - Gooseneck hydraulically lift-/lowerable and detachable - For tractor units: 6x4 or 8x4 Lowbed: - Lowbed with external beams, extendable version, SUPER LOW design, approx. 7,550 mm length - Lowbed with fixed hardwood floor, approx. 40 mm thick, with mechanical locking - Supply lines routed and protected inside the extendable beams; they automatically adjust to the lowbed length - 7 pairs of lashing rings, foldable outward (approx. LC 10,000 daN) - 6 pairs of threaded blocks on the inner beam for mounting bolt-on RUD rings Rear chassis: - Rear chassis with closed outer frame, chequer plate covering, continuous prisma excavator recess, approx. 1,450/900 x 505 mm, open at rear - 2 pairs fold-out lashing rings (approx. LC 10,000 daN) - 1 pair lashing rings flat in the recess (approx. LC 10,000 daN) - 2 pairs lashing rings flat in the recess (approx. LC 16,000 daN) - 2 pairs of stake pockets for drop-in stakes, approx. 100 x 50 mm, in outer frame PENDLE-AXLE: - PENDLE-AXLE, all axles forced hydro-mechanically steered - Hose burst valve on axle compensation cylinder with automatic reset function - Hydraulic cylinders with shut-off valves and check pins for securing in raised position - Axles painted with two coats of 2-component paint, solid color, gray 34-0260 - Technical axle load: 12,000 kg each - Hydraulic axle compensation - Axle tools Iiedpfow Tprbsx Agloa Tyres: - Tyres 245/70 R 17.5 3PMSF – brand at our discretion. Load index (146/146F) Braking system: - Braking system in accordance with EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit Electrical system: - Electrical system according to EU regulations - Lighting 24 Volt ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front connection bar with sockets 24N, 24S & 15 pin. Connection according to ISO: 24N ISO-1185, 24S ISO-3731, 15 pin ISO-12098 Steel structure: - Steel structure made of high-tensile fine-grain steels - Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Painting: - Complete steel structure is automatically shot-blasted after welding using a blast wheel system - Second blasting with corundum for optimal coating adhesion - Final coating with 2 coats of 2K topcoat, solid color RAL 3002 Carmine Red, according to RAL system 841GL - Rear panel metallized and painted in RAL 9010 Pure White - Rims in silver grey - Metallic paint not possible - Paint build-up tested in salt spray test according to ISO 9227-NSS - Sealing of cavities with special wax Accessories included: - Prepared for mounting bolt-on container positions for 1x 20’ or 1x 40’ container on the outer beams - Without container locks - 3.5 inch king pin - One galvanized steel front wall, approx. 400 mm high - One spare wheel carrier in front of the front wall - Yellow-red air couplings at the galvanized front connection bar - Remote rear axle steering from front and rear via cable remote control with push buttons, with axle alignment monitoring (without installation in the tractor unit) - Electro-hydraulic unit - Aluminium side and rear boards on gooseneck, plug-in type, approx. 2,000 x 400 mm (L x H) - The rear...

Stav: nový, pohotovostná hmotnosť: 11 000 kg, maximálna hmotnosť nákladu: 38 500 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Neck (Gooseneck): - Gooseneck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading Platform: - Telescopic loading platform with rear chamfer approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm - Wheel recesses with 15 x 15 mm square climbing strips and widenings in the lower area - Between the 1st and 2nd axle a pair of fixed wheel recesses with cover, approx. 1,610 x 970 x 400 mm - Recess in the chamfer and protruding into the loading platform for the reception of an excavator dipper stick approx. 2,900 x 750 x 210/290 mm - 1 pair of horizontal lashing rings at the front of the platform (LC 10,000 daN) - 5 pairs of fold-out lashing rings (LC 5,000 daN) - 2 pairs of fold-out lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) - Cutouts in the outer frame of the platform for securing straps (LC 2,000 daN) - incl. 3-piece removable galvanized covers over the wheel recesses – max. point load 3.5 t / each Two-Part Steel Ramps: - One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood planking - Ramp with hydraulically folding ramp sections, hydraulic lifting system, and hydraulically adjustable position Axles and Tyres: - BPW axles and suspension, 2 axles fixed, 1 axle self-steering - Technical axle load: 12,000 kg - Electromagnetic reverse lock, operable via reverse gear and manually - Air suspension with lifting and lowering valve - Axle tools - Tyres 235/75 R 17.5 - TPMS tire pressure monitoring system according to ECE R 141 Accessories included: - On the gooseneck and at the rear, left and right, each with a mount for warning signs including socket - One spare wheel - 2" king pin - One galvanized steel front wall approx. 400 mm high - Front galvanized connection rail with yellow-red air couplings - 4 wheel chocks - Galvanized extendable widenings, approx. 230 mm each side - Galvanized folding supports under the platform chamfer - One holder for a revolving beacon at the rear of the trailer - Cover plates to bridge the gap between ramps and platform - White reflector tape on sides and extension; rear in red, per EU regulations - Electro-hydraulic unit at the rear under the platform - Controls for ramps mounted on the right side of the trailer - European reflective warning signs (red-yellow) at the rear of the trailer - Four approx. 400 mm extendable warning panels, approx. 423 x 423 mm, each with a position light - Mount for revolving beacon on the warning panels - Aluminium plug-in drop sides and rear wall on the gooseneck, approx. 2,440 x 400 mm - Removable rear galvanized stanchions (body length approx. 2,560 mm) - 2 pairs of WADER container locks recessed into the platform for one 20ft or 30ft container - 3 pairs of stanchion pockets 100 x 50 mm on the outer frame of the platform - One removable galvanized intermediate table with 1 pair of WADER container locks - 20 x 20 mm square climbing strips every 200 mm on the outer frame of the platform chamfer - Painted sand layer on the tread plates on the gooseneck and the loading platform as anti-slip coating - 80 km/h speed stickers at the rear and both sides Ijdpfxoup U Hzj Agljia - Load manometer for determining the axle loads, including load diagram

Stav: nový, pohotovostná hmotnosť: 10 700 kg, maximálna hmotnosť nákladu: 38 800 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 r 17,5, farba: sivo-čierny, Výbava: ABS, Gooseneck: •Gooseneck with beveled front corners at 45° and rear chamfer approx. 750 mm x 10° •3 pairs of lash rings •30 mm thick hardwood decking Extendable Load Platform: •Extendable load platform with rear chamfer approx. 1,000 mm x 8° •Cut-outs in the outer frame of the load platform for attaching lashing straps •Approx. 48 mm thick hardwood decking, over the axles with chequer plate covering Two-piece Steel Ramps: •One pair of galvanized, two-piece steel ramps with approx. 48 mm thick hardwood covering •Ramps with hydraulically foldable ramp sections, hydraulic lifting system, and hydraulic lateral adjustment •Maximum capacity per pair: approx. 40,000 kg Axles and Tyres: •BPW axles and suspension, 2 rigid axles, 1 trailing steering axle •Technical axle load: 12,000 kg •Electromagnetic reverse lock, activated via reverse gear and manually •Air suspension with lift and lower valve •Axle tools •235/75 R 17.5 3PMSF Braking System: •WABCO braking system according to EU regulations with EBS-E Paintwork: •First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component zinc dust primer •High-quality, single-tone 2-component topcoat in MB 7350 Novagrau •Rear section metalized and painted in RAL 9010 Landing Legs: •JOST landing gear with 2-speed gearbox for 24 t lifting capacity (50 t test load). Steel Construction: •Steel construction made from high-strength fine-grained steels •Steel grades: •S355J2+N/S355MC •S690QL/S700MC Electrical System: •Electrical system complying with EU regulations, 24 volt lighting •ASPÖCK-UNIBOX on the front connection board with 24N, 24S & 15-pin sockets Accessories Included: •One spare wheel with holder •One galvanized steel front wall approx. 400 mm high •Yellow-red air couplings on the galvanized front connection board •4 wheel chocks •A holder for a warning beacon at the rear of the trailer •Recess in the rear gooseneck area for ALU approach ramps •Galvanized folding supports under the chamfer of the load platform •Cover plates to bridge the gap between the ramps and the load platform •White reflective tape as per EU regulations on the sides, extension, and rear (red) •Electro-hydraulic unit at the rear, under the load platform •One holder each on the gooseneck and on each ramp, left and right, for warning signs incl. socket •Ramp control valves mounted on the right-hand side of the trailer •On the gooseneck, ALU side and rear boards approx. 2,440 x 400 mm •Rear galvanized plug-in stakes are removable (body length approx. 2,560 mm) •Four warning panels, extendable by approx. 400 mm, each with a position light •3 pairs of WADER container pockets in the platform for a 20ft, 30ft, or 40ft container Iedpehlz S Nsfx Agloia •6 pairs of stake pockets (100x50 mm) in the outer frame of the load platform •Galvanized extensions, extendable by approx. 230 mm per side •20 x 20 mm square toehold strips every 200 mm on the outer frame of the platform chamfer •Sanded surface finish painted on the chequer plates, king pin, and load platform as anti-slip protection •Load gauge for determination of axle loads, including load diagram •HRM metallization (High Resistance Metallisation) of the outer frame •Complete steel structure shot-blasted, then the defined visible areas metallized with ZINACOR 850 (zinc 85% - aluminium 15%) by hot finish

Stav: nový, pohotovostná hmotnosť: 14 800 kg, maximálna hmotnosť nákladu: 61 700 kg, celková hmotnosť: 76 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 900 mm, veľkosť pneumatiky: 235/75/r17,5, farba: sivý, Výbava: ABS, Gooseneck: • Gooseneck with rear bevel approx. 750 mm x 10° • 3 pairs of lashing rings • 30 mm thick hardwood flooring Loading Platform: • Extendable loading platform with rear bevel approx. 500 mm x 8° • 9 pairs of exterior folding lashing rings • 1 pair of flat-mounted lashing rings at the front of the loading platform • Cutouts in the external frame of the loading platform for attaching tensioning straps • Approx. 48 mm thick hardwood flooring, over the axles with checker plate covering Landing Legs: • JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: • BPW axles and suspension, 1st axle self-steering, 2nd and 3rd axle fixed, 4th and 5th axle trailing-steer • Technical axle load: 12,000 kg • 1st, 4th, and 5th axle with electro-magnetic reverse lock, activated by reverse gear and manually • Tyres 235/75 R 17.5 3PMSF Brake System: • WABCO braking system according to EU standards with EBS-E (4S3M) Painting: • Top-quality and durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc-rich primer • High-quality, single-colour 2-component (2K) topcoat in MB 7350 Novagrau • Rear section metallised and painted in RAL 9010 (Pure White) Steel Construction: • Steel construction made from high-strength fine-grained steels • Steel grades: • S355J2+N/S355MC (yield strength 355MPa) • S690QL/S700MC (yield strength 690MPa) Accessories: • One spare wheel with holder in front of the bulkhead Iedpsma Hf Rjfx Aglsia • 2'' kingpin • Galvanised steel front wall, approx. 400 mm high • Yellow-red air couplings on the galvanised connection strip at the front • 2 wheel chocks with holder at the front wall • Receptacle at rear section of the gooseneck for ALU loading ramps • Galvanised, extendable widenings approx. 230 mm per side • Bracket for a beacon at the rear of the trailer • Galvanised supports under the rear bevel of the loading platform • White reflector tape according to EU standards at the sides, on the extension and red at the rear • Holders for warning signs incl. socket on both sides of the gooseneck and rear panel • Removable ALU side panels and rear board approx. 2,440 x 400 mm on the gooseneck • Removable rear galvanised stanchions (body length approx. 2,560 mm) • 3 pairs of WADER container locks in the loading platform for a 20ft (30ft) or a 40ft container • 7 pairs of stake pockets 100 x 50 mm in the outer frame of the loading platform • Lift axle on the front axle with control via TEBS E depending on current axle load and loading condition • Sliding mounting rails for ALU loading ramps at the rear • 20 x 20 mm square climbing strips every 200 mm on the outer frame of the loading platform bevel • BEKAMAX central lubrication system (Pico) with standard grease NLGI-2 and removable pump protection • Four extendable warning signs approx. 423 x 423 mm with marker light (extendable by approx. 400 mm) • Holder for beacon on the warning signs • European reflector plates (red-yellow) at the rear of the trailer • 80 km/h speed stickers on the rear and both sides • Load gauge including load diagram for axle load determination • HRM metallisation (High Resistance Metallisation) of the outer frame • Complete steel structure shot-blasted, then defined visible areas metallised with ZINACOR 850 (zinc 85% - aluminium 15%) hot-finished

Stav: nový, pohotovostná hmotnosť: 10 350 kg, maximálna hmotnosť nákladu: 39 150 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Výbava: ABS, Swan neck: - Swan neck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood floor, 30 mm thick Loading area: - Telescopic loading platform with rear bevel, approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm - Wheel recesses with square climbing bars 15 x 15 mm and widened sections at the bottom - Between 1st and 2nd axle: 1 pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm - 3-part removable galvanized covers over the wheel recesses (W 670 mm) – max. point load 5 t each - Recess in the rear bevel as well as into the loading area for excavator bucket stick storage, approx. 2,900 x 750 x 210/290 mm - 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN) - 5 pairs of outward-folding lashing rings (LC 5,000 daN) - 2 pairs of outward-folding lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) - Cutouts in the outer frame of the platform for attaching tie-down straps (LC 2,000 daN) One-piece ALU ramps: - One pair of one-piece ALU ramps approx. 2,500 x 600 mm - Ramp with spring lifting mechanism, manually adjustable - Maximum load per pair: 24,000 kg Axles and tires: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated automatically via reverse gear and manually - Air suspension with lift and lower valve - Axle tools - Tires 235/75 R 17.5 - TPMS tire pressure monitoring system according to ECE R 141 Accessories included: - 1 spare wheel with holder in front of the headboard - 2-inch king pin - 1 galvanized steel headboard, approx. 400 mm high - Yellow-red air couplings to the galvanized connection rail at the front - 4 wheel chocks with holders on headboard - ALU ramp storage at the rear of the swan neck - Galvanized extendable width extensions, extendable by approx. 230 mm per side - Galvanized folding supports under rear bevel of loading area - 1 beacon mounting bracket at trailer rear Iijdpfx Agoiu Er Ajlea - White reflector tape according to EU regulations on the sides; red on extension and rear - Swan neck and rear panel each with 1 holder for warning signs incl. socket, left and right - On swan neck: ALU drop-in side panels and rear panel, approx. 2,440 x 400 mm - The rear galvanized drop-in stakes are removable (superstructure length approx. 2,560 mm) - 2 pairs of WADER container pockets in platform for one 20ft or 30ft container - 3 pairs of stake pockets 100 x 50 mm in outer frame of platform - 1 removable galvanized intermediate table with 1 pair of WADER container pockets - Square climbing bars 20 x 20 mm every 200 mm on the outer frame at platform's rear bevel - Anti-slip sand finish painted onto tread plates on swan neck and loading area - Four extendable warning signs approx. 423 x 423 mm, extendable by approx. 400 mm, each with position light - Warning signs equipped with bracket for beacon - 80 km/h speed stickers on rear and both sides - Load pressure gauge for axle load determination including load chart - HRM metallization (High Resistance Metallisation) of outer frame - Complete steel structure shot-blasted, then all defined visible areas metallized with ZINACOR 850 (zinc 85% - alu 15%) via hot finishing

Stav: nový, pohotovostná hmotnosť: 12 900 kg, maximálna hmotnosť nákladu: 34 100 kg, celková hmotnosť: 47 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 850 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 350 mm, zavesenie: iný, veľkosť pneumatiky: 245/70 R 17,5, farba: sivý, prevádzková hmotnosť: 12 900 kg, Výbava: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading platform length, approx. 3,750 mm - Gooseneck hydraulically liftable/lowerable and removable - Technical fifth wheel load: 23,000 kg - Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4 Loading Platform: - Low bed with external beams, extendable “SUPER LOW” design, approx. 6,850 mm long - Low bed with fixed hardwood floor approx. 40 mm thick and mechanical locking Rear Chassis: - Rear chassis with closed outer frame, chequer plate covering, and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear - 2 pairs of lashing rings foldable outwards - 1 pair of lashing rings mounted flat in the trough - 2 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame Pendulum Axle and Tyres: - “PENDEL-AXLE”, all axles hydromechanically forced-steered Iiedpfxshlz R Se Aglsa - Burst protection valve on the axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pre-inserts for securing in raised position - Axles finished with two layers of single-colour 2K paint in "FAY-Grey-34-0260" - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres 245/70 R 17.5 - TPMS tyre pressure monitoring system according to ECE R 141 Accessories: - Prepared for mounting bolt-on container locks for 1x 20ft or 1x 40ft container on the outer beams - 2" kingpin - Galvanised steel front wall, approx. 400 mm high - One spare wheel - At the galvanised connection rail front, yellow-red air couplings - 4 wheel chocks - Forced steering from front and rear controlled via cable remote control with push buttons, includes single-track monitoring of axles - Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings - Electro-hydraulic power pack - White reflective tape on the sides, the extension, and the rear in accordance with EU regulations - European reflective panels (red-yellow) at the rear of the trailer - Brackets at the gooseneck and rear panel left/right for warning signs, including socket - 6 pairs of threaded blocks between lashing rings under the top flange on the outer beam for mounting bolt-on RUD VLBG-4 rings - Plug-in ALU sidewalls and rear wall on the gooseneck approx. 2,440 x 400 mm - The rear galvanised plug-in stakes are removable (body length approx. 2,560 mm) - Gooseneck rear upper area closed with removable cover - 5 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading platform - Folding widening pieces, approx. 230 mm per side - 2 pairs of bolt-on RUD VLBG-4 M24 rings (LC 8,000 daN) - 1 pair of steel ramps for bridging the low bed towing hook - On the loading platform, a coated sand layer as anti-slip protection - 80 km/h speed stickers at the rear and both sides - Rear part of the driving gear’s dipper stick trough covered by a plug-in plate - Four retractable warning boards approx. 423 x 423 mm, extendable by approx. 400 mm - Radio remote control for forced steering, in addition to cable control, with indicator lights on the receiver for axle single-track monitoring - Central lubrication system with 2 BEKAMAX (Pico) pumps using standard NLGI-2 grease - Load gauge for determining axle loads - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible surfaces are metallized with ZINACOR 850 (zinc 85% - alu 15%) and hot-finished

Stav: nový, pohotovostná hmotnosť: 15 420 kg, maximálna hmotnosť nákladu: 61 080 kg, celková hmotnosť: 76 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 900 mm, veľkosť pneumatiky: 235/75/r17,5, farba: sivý, Výbava: ABS, Gooseneck: Gooseneck with rear bevel of approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading Area: Extendable loading area with rear bevel of approx. 500 mm x 8° 8 pairs of folding outward lashing rings 1 pair of flat lashing rings at the front of the loading area Cutouts in the outer frame of the loading area for securing load straps Approx. 48 mm thick hardwood flooring, non-slip checker plate cover above the axles Two-piece Steel Ramps: One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering. Ramp parts are hydraulically foldable, equipped with hydraulic lifting mechanism and hydraulic lateral adjustment. Maximum load per pair: 50,000 kg. Iisdpol Sl Izofx Aglea Landing Legs: • JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: BPW axles and suspension, 4th and 5th axle steering Technical axle load: 12,000 kg 4th and 5th axles with electromagnetic reverse lock activated via reverse gear and manual operation Tyres 235/75 R 17.5 3PMSF Braking System: Braking system according to EU regulations with EBS-E (4S3M) Sockets and Lighting: Electrical system according to EU regulations, 24-volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets Connections according to ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paintwork: First-class and durable corrosion protection, achieved by standard shot-blasted welded frame with a 2-component (2K) zinc dust primer High-quality single color 2-component (2K) topcoat in MB 7350 Novagrau Rear section metallized and painted in RAL 9010 (Pure White) Metallic lacquer not available Steel Structure: Steel construction made from high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Accessories: One spare wheel with bracket in front of the bulkhead 2" kingpin Galvanized steel front wall approx. 400 mm high Yellow-red air couplings on the galvanized front connector strip 2 wheel chocks with holders on the front wall Provision at the rear of the gooseneck for ALU drive-on ramps Bracket for a beacon at the rear of the trailer Galvanized supports under the rear bevel of the loading area White reflector tape according to EU regulations on the sides, at the extension and rear red Electro-hydraulic unit at the rear under the loading area On gooseneck and rear panel (left and right) bracket for warning signs incl. socket Control valves for the ramps installed on the right side of the trailer A mud flap at the rear of the trailer Manual and description on USB stick 3.5" kingpin supplied loose On the gooseneck, plug-in ALU side walls and rear wall approx. 2,440 x 400 mm (LxH) Rear galvanized plug-in stakes are removable (Length of the structure approx. 2,560 mm) 3 pairs of WADER container pockets on the loading area for one 20' (30') or a 40' container 6 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading area Galvanized extensions, extendable by approx. 230 mm per side Lifting axle on the front axle, control via TEBS-E depending on current axle load and loading status Square climb strips 20 x 20 mm, every 200 mm on the outer frame of the loading area bevel On the checker plates, above the kingpin and the loa

Stav: nový, pohotovostná hmotnosť: 9 500 kg, maximálna hmotnosť nákladu: 35 500 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 500 mm, šírka ložného priestoru: 2 540 mm, zavesenie: vzduch, veľkosť pneumatiky: 435/50 R 19.5, farba: sivý, prevádzková hmotnosť: 9 500 kg, Výbava: ABS, Nakladacia plocha v vysunuteľnom vyhotovení: Nakladacia plocha s tvrdými drevenými doskami so zadnou skosením cca 1.000 mm x 8° 1 pár pevne zabudovaných kolísk na kolesá, cca 1.610 x 970 x 400 mm 2 páry upevňovacích krúžkov (LC 5.000 daN) 1 pár upevňovacích krúžkov (LC 10.000 daN) 6 párov smerom von sklopných upevňovacích krúžkov (LC 5.000 daN) 2 páry smerom von sklopných upevňovacích krúžkov (LC 10.000 daN) Výrezy v vonkajšom ráme nakladacej plochy na upevnenie napínacích pásov (LC 2.000 daN) Brzdový systém: Iijdpfxok Eammo Agloa Brzdový systém podľa noriem EÚ s EBS-E (2S2M) Lak: Prvotriedna a odolná ochrana proti korózii štandardne guľôčkovo tryskanej zváranej konštrukcie vďaka 2-komponentnej (2K) zinkovej základnej vrstve s práškovým zinkom Vysokokvalitný 2-komponentný (2K) vrchný náter v jednej farbe v odtieni Novagrau Zadná časť metalizovaná a lakovaná v RAL 9010 (čistá biela) Metalický lak nie je možný Návesové podpery: JOST návesové podpery (mechanické) s 2-rýchlostnou prevodovkou, nosnosť 24 t (skúšobná záťaž 50 t) Oceľová konštrukcia: Oceľová konštrukcia z vysokopevnostnej jemnozrnnej ocele Kvalita ocele: S355J2+N/S355MC (medza klzu 355 MPa) S690QL/S700MC (medza klzu 690 MPa) Elektrická inštalácia: Elektrická inštalácia podľa noriem EÚ, osvetlenie 24 voltov Zásuvky 24N, 24S & 15-kolíková Nápravy a pneumatiky: BPW nápravy, vzduchovo odpružené, s kotúčovými brzdami (377 mm), s funkciou zdvíhania/spúšťania Samosmerovacie nápravy s elektro-magnetickou spätnou blokáciou, aktivovanou spiatočkou alebo manuálne Nápravové náradie Pneumatiky 435/50 R 19.5 Zahrnuté príslušenstvo: Na pozinkovanej prednej prípojnici žlto-červené vzduchové spojky 4 kusy klinov s držiakom 2" kónusový čap Pozinkovaná čelná stena z ocele, výška cca 1600 mm. EN12642-XL Biela reflexná páska podľa predpisov EÚ po bokoch, na výsuvu a vzadu červená Nakladacia plocha so silnou podlahou z tvrdého dreva 9 párov zásuvných vreciek na stĺpiky 100 x 50 mm vo vonkajšom ráme nakladacej plochy 1 držiak na rezervné koleso pod nakladacou plochou v smere jazdy vpravo Pozinkované výklopné podpery pod skosením nakladacej plochy Posuvné zavesovacie lišty na ALU nájazdové rampy na zadnej časti vozidla Európske reflexné tabule (červeno-žlté) na zadnej časti návesu Odstredivý záchyt na zadnej časti návesu Držiak na výstražné svetlo na zadnej časti návesu Na labutom krku a na zadnom nosníku naľavo a napravo držiak na výstražné tabule vrátane zásuvky HDPE náradový box 620x360x610 pod nakladacou plochou v smere jazdy naľavo 4 páry WADER kontajnerových vreciek v nakladacej ploche pre 1x 20ft-kontajner alebo 1x 40ft-kontajner, vo výsuve je pripravené ďalšie uzamknutie pre 45ft-kontajner 3 páry priečnych zásuvných líšt na stĺpiky 100 x 50 mm Zdvihacia náprava na prednej náprave s riadením cez TEBS E v závislosti na aktuálnom zaťažení náprav a aktuálnom stave naloženia Rýchlostná nálepka 80 km/h vzadu a na oboch stranách Štyri približne o 400 mm vysúvateľné výstražné tabule cca 423 x 423 mm s LED pozičnou lampou. Na výstražných tabuliach držiak pre výstražné svetlo Manometer na meranie záťaže na nápravy vrátane diagramu zaťaženia HRM metalizácia (High Resistance Metallisation) vonkajšieho rámu Kompletná oceľová konštrukcia guľôčkovo tryskaná, následne definované viditeľné plochy metalizované

Stav: nový, pohotovostná hmotnosť: 10 600 kg, maximálna hmotnosť nákladu: 35 400 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 500 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 940 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Výbava: ABS, Load platform: - Extendable load platform - Load platform with hardwood planks, rear bevel approx. 500 mm x 8° - 2 pairs of lashing rings (LC 5,000 daN) - 1 pair of lashing rings (LC 10,000 daN) - 6 pairs of fold-out lashing rings to the outside (LC 5,000 daN) - 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) - Cut-outs in the outer frame of the loading platform for attaching lashing straps Braking system: - Braking system according to EU regulations with EBS-E (2S2M) Paintwork: - First-class and durable corrosion protection for the standard shot-blasted welded frame, ensured by a two-component (2K) zinc dust primer - High-quality two-component (2K) top coat in single-color Nova Grey Ijdpfjl Ux Rwjx Agleia - Rear precisely metalized and painted in RAL 9010 (Pure White) - No metallic paint available Landing gear: - JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Steel construction: - Steel structure made of high-strength fine-grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355MPa) - S690QL/S700MC (yield strength 690MPa) Electrical system: - Electrical installation according to EU regulations, 24V LED lighting - 2x 7-pin and 15-pin sockets Axles and tyres: - BPW axles, air suspension, with disc brakes (377 mm), with raise/lower function - Hydro-mechanical forced steering - Axle tools - Twin tyres 235/75 R 17.5 Standard accessories: - Yellow-red air couplings on the galvanized front connection rail - 4 wheel chocks with holders - 2" king pin - Galvanized steel front wall, approx. 1600 mm high - White reflective tape according to EU regulations on the sides, on the extension, and red at the rear - Load platform with heavy-duty hardwood floor - Steering from front and rear via cable - Remote operation via push-button control, with axle steering alignment indicator - Radio remote control for rear steering - 9 pairs of stake pockets for 100 x 50 mm plug-in stakes on the outer frame of the load platform - Galvanized folding supports under the rear bevel of the platform - Movable hook-in rail for aluminium loading ramps at the rear of the vehicle - European reflective panels (red-yellow) at the rear of the trailer - One mud flap at the rear of the trailer - Rear beacon bracket - Warning sign brackets including sockets on the gooseneck and rear plate left/right - INOX toolbox 1500x390x810 mm under platform, right side direction of travel - BEKAMAX (Pico) central lubrication system with NLHI-2 standard grease and removable pump guard - 6 pairs of WADER container locks in the loading platform, for 1x 20ft container, 2x 20ft containers or 1x 40ft container, additional locking position provided in the extension for a 45ft container - 4 pairs of crosswise stake pocket rails in the loading platform for 100 x 50 mm plug-in stakes - Lifting axle on the front axle with TEBS control - depending on current axle load and load status - Speed stickers (80 km/h) on rear and both sides - Four warning signs, extendable by approx. 400 mm, approx. 423 x 423 mm with LED position lights - Bracket for beacon on warning signs - Load pressure gauge for axle load determination incl. load diagram - HRM metalizing (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, metalized with ZINACOR 850 (zinc 85% - alu 15%) and hot-finished at the defined visible areas

Stav: nový, pohotovostná hmotnosť: 11 300 kg, maximálna hmotnosť nákladu: 36 700 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 1 250 mm, zavesenie: vzduch, veľkosť pneumatiky: 385/65 r 22,5, farba: sivo-čierny, Výbava: ABS, Loading platform: Extendable loading platform with pneumatically operated locking mechanism A fixed intermediate table approx. 250 mm wide is mounted on the central beam 8 pairs of lashing rings, foldable outwards (LC 5,000 daN) 3 pairs of lashing rings, foldable outwards (LC 10,000 daN) Cut-outs in the outer frame of the loading platform for attaching lashing straps (LC 2,000 daN) Axles and tyres: BPW axles and suspension, all axles hydro-mechanically forced-steered Disc brakes, technical axle load: 10,000 kg Air suspension with lift and lower valve Axle tools 6-fold tyres, 385/65 R 22.5 Brake system: Brake system according to EU regulations with EBS-E (2S2M) Landing legs: JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Steel structure: Steel structure made of high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system: Electrical system according to EU regulations, lighting 24V ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection strip with sockets 24N, 24S & 15-pin Connection according to ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paintwork: First-class and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer High-quality 2-component (2K) single-colour top coat in novagrey Rear section metallised and painted in RAL 9010 (pure white) No metallic paint possible Accessories included: Mountings for warning plates on the gooseneck and on the rear plate, left and right, each with socket Remote steering operated from the front and rear via cable remote control with push buttons, with axle tracking control Electro-hydraulic unit 4 wheel chocks with holder on the front wall 2" king pin Galvanised steel front wall approx. 2,200 mm high Yellow-red air couplings on the galvanised connection strip at the front White reflective tape according to EU regulations on the sides, on the extension and rear in red European reflector panels (red-yellow) at the rear of the semitrailer One mud flap at the rear of the trailer Manual and description Iedpfx Ajhlz Sheglsia Mounting for a rotating beacon at the rear of the trailer Loading platform with approx. 30 mm thick wooden floor enclosed in omega profiles 10 pairs of stanchion sockets for plug-in stanchions 100 x 50 mm on the outer frame of the loading platform 1 spare wheel holder under the loading platform, right-hand side in direction of travel 6 pairs of WADER container pockets in the loading platform, for 1x 20ft container, 2x 20ft container or 1x 40ft container; for 45ft container, an additional locking position is provided in the extension 5 pairs of stanchion rail cross-members mounted transversely in the loading platform, for plug-in stanchions 100 x 50 mm One galvanised holder transversely under the platform (2,390 x 720 x 400 mm) Access ladder mounted on the right-hand side in direction of travel One HDPE toolbox 1,200x500x480 at the front under the loading platform, left-hand side in direction of travel Lift axle on the front axle with control by TEBS E depending on the current axle load and loading condition Central lubrication system with 2 BEKAMAX (Pico) pumps, with standard grease NLGI-2 and removable guard around the pump Red/white reflective tape in the extension of the loading platform Painted sand coating on the central beam as an anti-slip measure Radio remote control for the steering in additi

Stav: nový, pohotovostná hmotnosť: 6 350 kg, maximálna hmotnosť nákladu: 38 650 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 540 mm, zavesenie: vzduch, veľkosť pneumatiky: 385/65 R22,5, Výbava: ABS, Loading Area: - 2 pairs of folding lashing rings on the outside (LC 5,000 daN) - 24 pairs of cut-outs in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN) Landing Legs: - JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: - BPW axles, air-suspended, with disc brakes (430 mm), equipped with lifting/lowering function - Tyres: 385/65 R 22.5 Brake System: - WABCO brake system according to EU regulations with EBS-E (2S2M) Paintwork: - First-class and long-lasting corrosion protection of the standard shot-blasted welded frame is ensured by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) single-colour top coat in MB 7350 Nova Grey - Rear section metallised and painted in RAL 9010 (Pure White) - Metallic paint finish not possible Steel Construction: - Steel construction made of high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (Yield strength 355MPa) - S690QL/S700MC (Yield strength 690MPa) Electrical System: - Electrical system according to EU regulations - 24 Volt lighting - ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front connection rail with sockets 24N, 24S & 15-pin - Connection in accordance with ISO. - 24N ISO-1185 Iiodpeiu Etksfx Aglsa - 24S ISO-3731 - 15-pin ISO-12098 Accessories Included: - Yellow-red air couplings mounted on the galvanised connection rail at the front - 4 wheel chocks with holders - 2" king pin - Galvanised steel front wall approx. 1,600 mm high, EN12642-XL - White reflective tape according to EU regulations on the sides and red on the rear of the semi-trailer - European reflective panels (red-yellow) on the rear of the trailer - Loading platform with approx. 30 mm thick hardwood floor set in omega profiles - 10 pairs of stake pockets for plug-in stanchions 100 x 50 mm on the outer frame of the loading area - 3 pairs of cross-rails for stake pockets for plug-in stanchions 100 x 50 mm, mounted transversely on the loading deck - Storage tray for 1,000 mm plug-in stanchions, at rear in the central beam - 1 spare wheel holder under the loading platform on the right-hand side (in direction of travel) - 1 mudflap at the rear of the trailer - Manual and documentation on USB stick - 1 bracket for a rotating beacon at the rear of the trailer - On the gooseneck and rear panel, left and right, a bracket for warning signs including socket - 6 pairs of WADER container locks on the loading platform for 1x 20ft, 2x 20ft, or 1x 40ft container, flush with rear - 80 km/h speed stickers at the rear and on both sides - Four warning boards, extendable by approx. 400 mm, approx. 423 x 423 mm, with an LED position light - Load pressure gauge for axle load determination including load diagram - HRM metallisation (High Resistance Metallisation) of the outer frame - Complete steel construction shot-blasted, followed by metallisation with ZINACOR 850 (Zinc 85% - Alu 15%) on the defined visible surfaces

Stav: nový, pohotovostná hmotnosť: 8 300 kg, maximálna hmotnosť nákladu: 36 700 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 1 080 mm, zavesenie: vzduch, veľkosť pneumatiky: 385/65 R 22.5, farba: sivý, Výbava: ABS, zdvíhacie čelo, Loading Platform: Extending loading platform design with pneumatically operated locking mechanism. Cut-outs in the outer frame of the loading platform for securing lashing straps. Landing Legs: JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity. Axles and Tyres: BPW air suspension axles with disc brakes (430 mm), equipped with lift/lower function. Trailing steering axle with electromagnetically activated reverse lockout, switchable via reverse gear or manually. Axle toolbox. Tyre size 385/65 R 22.5. Brake System: WABCO braking system compliant with EU regulations, fitted with EBS-E. Paintwork: Premium and durable corrosion protection of the standard shot-blasted welded frame by means of 2-component (2K) zinc dust primer. High-quality single-tone 2-component top coat in MB 7350 Novagrau. Rear section metallised and painted in RAL 9010. Metallic paint not possible. Steel Construction: Steel structure made from high-tensile fine-grain steels. Steel Grades: S355J2+N/S355MC S690QL/S700MC Electrical System: Electrical installation according to EU regulations. Lighting: 24 Volt ASPÖCK-NORDIK. ASPÖCK-UNIBOX on the front connection strip with 24N, 24S, and 15-pin sockets. Connections in accordance with ISO standards. Accessories Included: Galvanised air coupling connectors (yellow-red) on the front connection strip. Galvanised steel front wall, approx. 1,600 mm high, EN12642-XL. 4 wheel chocks with bracket. White reflective tape according to EU regulations at the sides, extension, and red at the rear. European reflective boards at the rear of the trailer. Loading platform with approx. 30 mm thick hardwood floor, enclosed in Omega profiles. 10 pairs of stake pockets for 100 x 50 mm square stakes in the outer frame. 1 spare wheel holder below the loading platform, right side when facing the direction of travel. Iiodpfxoikyh Ho Agloa Manual and documentation. Bracket for rotating beacon at the rear of the trailer. On the gooseneck and on the rear apron, left and right, each with bracket for warning signs including socket. Anti-slip sand coating painted onto the central beam. 6 pairs of WADER container pockets in the loading platform for 1x 20ft container, 2x 20ft containers, or 1x 40ft container. For an extended 45ft container, an additional locking position is provided. 4 pairs of cross stake pocket rails, mounted transversely on the loading platform for 100 x 50 mm plug-in stakes. 1 galvanised bracket mounted transversely under the loading platform (2,390 x 720 x 400 mm). Access ladder mounted on the right side in the direction of travel. Lift axle on the front axle, controlled by TEBS E, depending on current axle load and loading status. Load gauge for axle load assessment, including load diagram. HRM metallisation of the outer frame: complete steel structure shot-blasted, followed by hot-finish metallisation of the defined visible surfaces with ZINACOR 850.

Stav: nový, maximálna hmotnosť nákladu: 36 020 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 540 mm, zavesenie: vzduch, veľkosť pneumatiky: 435/50 R 19.5, farba: sivý, Výbava: ABS, Loading Platform: - Loading platform with extendable design featuring pneumatically operated locking system - 2 pairs of lashing rings (LC 5,000 daN) - 1 pair of lashing rings (LC 10,000 daN) - 6 pairs of outward-folding lashing rings (LC 5,000 daN) - 2 pairs of outward-folding lashing rings (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for attaching tensioning straps Axles and Tyres: - BPW axles, air-suspended, with disc brakes (377 mm), equipped with lifting/lowering function - Self-steering axles with electromagnetic reverse lock, activated via reverse gear or manually - Axle tools - Tyres 435/50 R 19.5 Brake System: - Brake system in accordance with EU regulations with EBS-E (2S2M) Paintwork: - Premium, long-lasting corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer - High-quality single-tone 2-component (2K) topcoat in Novagrau - Rear section metallized and painted in RAL 9010 (Pure White) - Metallic paint finish not possible Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Steel Construction: - Steel construction made from high-tensile fine-grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical System: - Electrical system compliant with EU regulations, lighting 24 Volt ASPÖCK-NORDICK (ASS3) - ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets - Connection as per ISO - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Included Accessories: Iedpfx Agsi Dwlwelsia - Yellow-red air couplings on the galvanized front connection bar - 2 wheel chocks with holder - 2" kingpin - A galvanized steel front wall, approx. 1,600 mm high - Yellow reflector tape in accordance with EU regulations on the sides, extension section, and rear of the trailer - European reflector plates (Red-Yellow) at the rear of the trailer - Loading platform with approx. 38 mm thick hardwood flooring - 10 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the platform - 1 spare wheel holder under the loading platform on the right-hand side in the direction of travel - Manual and description on USB stick - 1 mudflap at the rear of the trailer - 1 bracket for a beacon at the rear of the trailer - On the gooseneck and the rear plate, left and right, each with bracket for warning signs including socket - 1 INOX toolbox mounted crosswise under the platform (1,000 x 400 x 2,500mm) - 6 pairs of WADER container pockets in the platform, for 1x 20ft container, 2x 20ft containers or 1x 40ft container; an additional locking point is provided in the extension section for a 45ft container - 3 pairs of stake pocket strips, mounted transversely in the platform, for plug-in stakes 100 x 50 mm - 60 km/h speed sticker at the rear - 2 reversing spotlights mounted on the rear plate - Four warning signs extendable by approx. 400 mm (approx. 423 x 423 mm) each with a position lamp - Bracket for beacon on the warning signs - HRM metallization (High Resistance Metallization) of the outer frame - Complete steel construction shot-blasted, then all defined visible surfaces metallized and hot-finished with ZINACOR 850 (85% zinc – 15% aluminium)

Stav: nový, pohotovostná hmotnosť: 9 300 kg, maximálna hmotnosť nákladu: 38 700 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 1 200 mm, zavesenie: vzduch, veľkosť pneumatiky: 385/65 R 22,5, farba: sivo-čierny, Výbava: ABS, Ložná plocha: • Výsuvná ložná plocha s pneumaticky ovládaným uzávěrem • Ložná plocha s cca 30 mm silnou podlahou z dřevěného masivu • 7 párů vyklápěcích vázacích ok směrem ven (LC 5 000 daN) • 3 páry vyklápěcích vázacích ok směrem ven (LC 10 000 daN) • Výřezy ve vnějším rámu ložné plochy pro zavěšení upínacích pásů (LC 2 000 daN) Nápravy a pneumatika: • Nápravy BPW a odpružení, všechny nápravy hydro-mechanicky nuceně řízené • Se kotoučovými brzdami • Technické zatížení nápravy: 10 000 kg • Vzduchové odpružení s ventilem pro zvedání a spouštění • Nářadí pro nápravy • Pneumatiky: 385/65 R 22,5 • Systém kontroly tlaku v pneumatikách TPMS dle ECE R 141 Brzdový systém: • Brzdový systém WABCO dle předpisů EU s EBS-E (2S2M) Elektrické zařízení: • Elektrická instalace dle předpisů EU, osvětlení 24 V ASPÖCK-NORDIK (ASS3) • ASPÖCK-UNIBOX na připojovací liště vpředu se zásuvkami 24N, 24S & 15-pin • Připojení dle ISO • 24N ISO-1185 • 24S ISO-3731 • 15-pin ISO-12098 Příslušenství v ceně: • Řízení zadní nápravy zepředu a zezadu pomocí kabelového dálkového ovládání s tlačítky, s kontrolou jedné stopy náprav • 4x zajišťovací klíny s držákem na čelní stěně • 2" královský čep • 1x pozinkovaná čelní stěna z oceli, cca 1 600 mm vysoká • Na pozinkované připojovací liště vpředu žluto-červené vzduchové spojky • Bílé reflektorové pásky dle EU na bocích, výsuvu a vzadu na návěsu v červené barvě • Evropské reflektorové štítky (červeno-žluté) vzadu na návěsu • 1x zástěrka vzadu na návěsu • Návod k obsluze a popis • Držák pro výstražné světlo vzadu na návěsu • Ložná plocha s cca 30 mm silnou dřevěnou podlahou zakrytá Omega-profily Iedeiu Etropfx Agloia • 10 párů kapes na sloupky pro zasouvací sloupky 100 x 50 mm ve vnějším rámu ložné plochy • 1x držák rezervního kola pod ložnou plochou vpravo ve směru jízdy • Elektrohydraulická jednotka • Na labutím krku a zadní části vlevo i vpravo držák výstražných štítů včetně zásuvky • Na centrálním nosníku lakovaná vrstva písku jako ochrana proti smyku • 6 párů kontejnerových kapes WADER v ložné ploše, pro 1x 20ft, 2x 20ft nebo 1x 40ft kontejner, u výsuvu další uzamykací bod pro 45ft kontejner • 4 páry příčných kapes pro sloupky 100 x 50 mm v ložné ploše • Montovaná nástupní žebřík vpravo ve směru jízdy • 1x box na nářadí z HDPE cca 1 200 x 500 x 480 mm vpředu pod ložnou plochou vlevo ve směru jízdy • Centrální mazací zařízení BEKAMAX (Pico) s odnímatelným krytem čerpadla • Zvedací náprava na přední nápravě s ovládáním přes TEBS E v závislosti na aktuálním zatížení nápravy a stavu naložení • Bezdrátové dálkové ovládání pro řízení náprav navíc ke kabelovému ovládání, s kontrolkami na přijímači pro kontrolu jedné stopy • Čtyři výsuvné výstražné tabule cca 400 mm, cca 423 x 423 mm s pozičním světlometem • Na výstražných tabulích držák pro výstražné světlo • Nálepky s omezením rychlosti 80 km/h vzadu a na obou stranách • Manometr pro měření zatížení náprav včetně zatěžovacího diagramu • Metalizace HRM (High Resistance Metallisation) vnějšího rámu • Celá ocelová konstrukce tryskána, poté definované viditelné plochy metalizované a žárově upraveny ZINACOR 850 (zinek 85 % - hliník 15 %)

Stav: nový, maximálna hmotnosť nákladu: 38 800 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5 3PMSF, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck with chamfered front corners at 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable loading platform: - Extendable loading platform with rear chamfer approx. 1,000 mm x 8° - 6 pairs of outward-folding lashing rings (LC 5,000 daN) - 3 pairs of outward-folding lashing rings (LC 10,000 daN) - 1 pair of flat-mounted lashing rings at the front of the loading area (LC 10,000 daN) - Cut-outs in the outer frame of the loading platform for securing straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, over the axles with anti-slip chequer plate Axles and tires: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lowering valve - Axle tools - 235/75 R 17.5 3PMSF Brake system: - WABCO brake system according to EU regulations with EBS-E (2S2M) Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox, 24t lifting capacity (50t test load) Included accessories: - One spare wheel with holder in front of the bulkhead - 2-inch king pin - Galvanized steel bulkhead, approx. 400 mm high - Yellow and red air couplings on the galvanized front connector strip - 4 wheel chocks with holders at the bulkhead - Mount for rotating beacon at the rear of the trailer - Receptacle at the rear of the gooseneck for ALU approach ramps - Galvanized folding supports under the chamfer of the loading platform - Cover plates for bridging the gap between ramps and platform - White reflective tape according to EU regulations on sides, extension, and red at the rear - Electro-hydraulic unit positioned at the rear, under the platform - On the gooseneck and ramps, left and right, mounts for warning signs including power socket - Control valves for the ramps installed on the right side of the trailer - One mud flap at the rear of the trailer - User manual and documentation on USB stick - ALU side walls and rear wall approx. 2,440 x 400 mm on the gooseneck - The rear, galvanized plug-in stanchions are removable (structure length approx. 2,560 mm) - Four extendable warning signs approx. 423 x 423 mm with position light, extendable by approx. 400 mm - 3 pairs of WADER container pockets in the platform suitable for a 20ft, 30ft, or 40ft container - 6 pairs of 100x50 mm stanchion pockets in the external frame of the loading platform - Galvanized side extensions, extendable by approx. 230 mm per side - 20 x 20 mm square lashing rails every 200 mm on the external frame of the platform's chamfer - Anti-slip sand coating, painted on chequer plates above the king pin and on the loading platform - Mount for rotating beacon on warning signs Iiodpfx Aeuqlmnsgloa - European reflective boards (red-yellow) at the rear of the trailer - 80 km/h speed stickers at the rear and both sides - Load manometer for axle load measurement including load diagram - HRM metallization (High Resistance Metallisation) of the external frame - Complete steel structure shot-blasted, then all defined visible surfaces hot-metal sprayed with ZINACOR 850 (zinc 85% - aluminum 15%)

Stav: nový, pohotovostná hmotnosť: 7 900 kg, maximálna hmotnosť nákladu: 41 600 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, prevádzková hmotnosť: 7 900 kg, Výbava: ABS, Gooseneck: - Gooseneck with rear taper approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Loading Platform: - Loading platform with rear taper approx. 1,000 mm x 8° - Recess in the sloped section and extending into the loading platform for the excavator bucket stick, approx. 2,900 x 750 x 210/290 mm - Cut-outs in the outer frame of the loading platform for attaching tensioning straps - Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and Tyres: - BPW axles and suspension, 2 fixed axles, 1 trailing-steer axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated by reverse gear and manually - Air suspension with lift and lower valve - TPMS tyre pressure monitoring system according to ECE R 141 - Tyres 235/75 R 17.5 Paintwork: - Complete steel structure automatically shot-blasted after welding with turbine blasting unit - Second blast treatment with corundum for optimal adhesion of the coating system - Final coating with 2 coats of 2K topcoat, single colour in RAL MB 7350 Novagrau - Rims painted silver - Rear section metallised and painted in RAL 9010 (Pure White) - Cavities sealed with special wax Electrical System: - Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX on the front connector strip with sockets: 2x 7-pin & 1x 15-pin Included Accessories: - Extensive lashing positions - 2" king pin - One galvanised steel front wall approx. 400 mm high - Yellow-red air couplings on the galvanised front connector strip - 4 wheel chocks with holder on the front wall - Mounting at the rear of the gooseneck for ALU loading ramps - Galvanised folding supports under the sloped rear section of the loading platform - A holder for a beacon at the rear of the trailer - Galvanised, extendable side extensions approx. 230 mm each side - White reflective tape on the sides and red on the rear in accordance with EU regulations - At the gooseneck and rear plate, left and right, each with a holder for warning plates including socket Iisdeunrapepfx Agloa - On the gooseneck, plug-in ALU side and rear boards approx. 2,440 x 400 mm - The rear, galvanised stakes are removable - 2 pairs of WADER container locks in the loading platform for a 20 ft container - 6 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the loading platform - Sliding mounting rail for ALU loading ramps at the rear of the vehicle - 20 x 20 mm square climbing strips every 200 mm on the outer frame of the sloped section of the loading platform - Painted-on sand coating as anti-slip protection on the checker plates of the gooseneck and the loading platform - Four warning plates extendable by approx. 400 mm, approx. 423 x 423 mm each, with position light - Holder for beacon on the warning plates - 80 km/h speed stickers on the rear and on both sides - European reflective panels (red-yellow) at the rear of the trailer - Manual and documentation on USB stick - HRM metallisation (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then the defined visible areas are hot-finished with ZINACOR 850 metallisation (zinc 85% - aluminium 15%)

Stav: nový, maximálna hmotnosť nákladu: 30 190 kg, celková hmotnosť: 43 000 kg, konfigurácia náprav: 2 nápravy, Výbava: ABS, You can find our complete range of immediately and short-term available vehicles on our website. Excerpt from the equipment list. Full specification available upon request. Loading platform: - Low bed with externally mounted beams, extendable in SUPER LOW design, approx. 6,850 mm long - Low bed with fixed hardwood floor, approx. 40 mm thick, with mechanical locking - Supply lines are protected within the extendable beams and automatically adjust to the current low bed length - 5 pairs of outward-folding lashing rings (LC 10,000 daN) - 6 pairs of threaded blocks on the inner beam for mounting screw-in RUD rings Iijdexarl Njpfx Agloa Gooseneck: - Gooseneck in SNT design for optimum loading length, approx. 3,750 mm long - Gooseneck hydraulically lift/lowerable and removable - Technical fifth-wheel load: 23,000 kg - Suitable for tractor units (4x2, 6x2) Rear chassis: - Rear chassis in short design with closed outer frame and chequer plate cover - Chassis with excavator recess, closed at the rear section for housing air tanks - 2 pairs of outward-folding lashing rings (LC 5,000 daN) - 1 pair of outward-folding lashing rings (LC 10,000 daN) - 1 pair of horizontal lashing rings at front & rear of the chassis (LC 10,000 daN) Axles: - BPW axles with hydro-mechanical forced steering - Technical axle load: 12,000 kg each - Air suspension with lift/lower valve Tyres: - 245/70 R 17.5 3PMSF tyres, brand of our choice - Load index (146/146F) - TPMS tyre pressure monitoring system (ECE R 141 compliant) - Data transfer to tractor via standardised EBS interface per ISO 11992 - For proper display, the tractor unit must be able to transmit and display these data Brake system: - Brake system compliant with EU regulations with EBS-E (2S2M) Electrical system: - Electrical system per EU regulations, lighting 24 V ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX at the front wiring harness with sockets 24N, 24S & 15 pin according to ISO: 24N ISO-1185, 24S ISO-3731, 15 pin ISO-12098 Steel construction: - Steel structure made of high-strength fine-grained steels - Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: - Entire steel structure automatically shot-blasted after welding - Second blasting with corundum for optimal coating adhesion - Whole vehicle chassis metalized with ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection - Final coat with 2 layers of 2K topcoat, single-colour in RAL 3002 Carmine Red, per RAL system 841GL - Rims in silver - Rear section metalized and painted in RAL 9010 (Pure White) - No metallic finishes possible - Paint structure salt spray-tested per ISO 9227-NSS - Cavities sealed with special wax Includes the following additional equipment: - 2-inch king pin - One galvanized steel front wall, approx. 400 mm high - Remote steering at front and rear via cable remote control with push buttons, incl. single-wheel tracking (without installation in tractor unit) - Hydraulic connections from gooseneck to low bed via multi-coupling instead of screw couplings - Electro-hydraulic power unit - Preparation for mounting screwed container locks for one 20' or one 40' container on the outer beams - No container locks included

Stav: nový, maximálna hmotnosť nákladu: 33 750 kg, celková hmotnosť: 47 000 kg, konfigurácia náprav: 2 nápravy, celková šírka: 2 550 mm, Výbava: ABS, You can find our complete inventory of vehicles that are available for immediate and short-term delivery on our website. Excerpt from the equipment specification. Complete equipment details upon request. Iiodpfx Ajxbmn Ujglja Gooseneck: - Gooseneck in SNT design for optimized loading area length, approx. 3,750 mm long - Gooseneck hydraulically liftable/lowerable and detachable - Technical fifth wheel load: 23,000 kg For tractors: 4 x 2, 6 x 2, and 6 x 4 Low bed: - Low bed with externally mounted, extendable beams in "SUPER LOW" design, approx. 6,850 mm long - Low bed with fixed hardwood flooring (approx. 40 mm thick) and mechanical locking - Supply lines routed protected within the extendable beams, automatically adjusting to the respective low bed length - 5 pairs of foldable lashing rings (LC 10,000 daN) - 6 pairs of threaded blocks on the inner beam for mounting screwable RUD rings Rear running gear: - Rear running gear with closed outer frame, chequer plate covering, and continuous prism-shaped excavator trough, approx. 1,250/700 x 505 mm, rear open - 2 pairs of foldable lashing rings (LC 10,000 daN) - 1 pair of horizontal lashing rings in the trough, LC 16,000 daN - 1 pair of horizontal lashing rings in the trough, LC 10,600 daN - 2 pairs of stake pockets for plug-in stakes, approx. 100 x 50 mm in the outer frame Pendel-axle: - Pendel-axle, all axles hydro-mechanically forced-steered - Hose rupture valve on the axle compensation cylinder with automatic reset function - Hydraulic cylinder with shut-off valves and guide pin for securing in the raised position - Final coating of axles with 2 layers of 2-component paint, single color in FAY-Grey-34-0260 - Technical axle load: each 12,000 kg, hydraulic axle compensation - Axle tools - Tyres: 245/70 R 17.5 3PMSF – manufacturer at our discretion. Load index (146/146F) TPMS: - TPMS tyre pressure monitoring system according to ECE R 141 Brake system: - Wabco brake system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Electrical system: - Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX on the front wiring rail with 24N, 24S, and 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel construction: - Steel construction made of high-strength fine-grained steels - Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Coating: - Complete steel construction automatically blast-cleaned with shot blast system after welding - Second blasting with corundum for optimal adhesion of the coating system - HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure optimal corrosion protection - Final coating with 2 layers of 2-component top coat, single color RAL 3002 carmine red according to the RAL 841GL system Including the following additional equipment: - 2-inch kingpin - One galvanized steel front wall, approx. 400 mm high - Steering control at the front and rear via cable remote control (pushbutton operated), including axle single-track monitoring (without installation in the tractor unit) - Electro-hydraulic power pack - 2 pairs of bolted container locks on the outer beams. Includes 2 pairs of container locks for 1x 20' or 1x 40' container - On the gooseneck, removable aluminium drop sides and rear wall, approx. 2,440 x 400 mm (L x H) - The rear galvaniz

Stav: nový, maximálna hmotnosť nákladu: 25 645 kg, celková hmotnosť: 38 000 kg, konfigurácia náprav: 2 nápravy, celková šírka: 2 540 mm, Výbava: ABS, Náš kompletný sklad vozidiel s okamžite a krátkodobo dostupnými vozidlami nájdete na našej webstránke. Výpis z výbavy. Kompletná výbava na vyžiadanie. Ložná plocha: Nízkozdvižná plošina so stredovým nosníkom, výsuvné prevedenie, dĺžka cca 6 750 mm * 5 párov sklopných úchytných krúžkov von (LC 5 000 daN) * 1 pár sklopných úchytných krúžkov von (LC 10 000 daN) * 1 pár ležatých úchytných krúžkov vzadu na ložnej ploche (LC 10 000 daN) Labutí krk: * Hydraulicky zdvíhateľný / spustiteľný a odpojiteľný labutí krk Podvozok vzadu: * Zadný podvozok, krátka verzia s uzavretým vonkajším rámom a krytom z ryhovaného plechu * Podvozok s výrezom pre rýpadlo, ktorý je vzadu uzavretý na uloženie vzduchových nádrží * 2 páry sklopných úchytných krúžkov von (LC 5 000 daN) * 1 pár sklopných úchytných krúžkov von (LC 10 000 daN) * 1 pár ležatých úchytných krúžkov vzadu na podvozku (LC 10 000 daN) Nápravy: * BPW nápravy, hydro-mechanicky nútene riadené * Vzduchové pruženie s ventilom na zdvíhanie a spúšťanie Pneumatiky: * Pneumatiky 245/70 R 17.5 3PMSF * TPMS: systém kontroly tlaku v pneumatikách podľa ECE R 141 Brzdová sústava: * Brzdová sústava Wabco podľa predpisov EÚ s EBS-E (2S2M) Lakovanie: Kvalitný 2-komponentový (2K) vrchný náter v jednofarebnom prevedení RAL 3000 ohnivo červená Vrátane nasledujúcej doplnkovej výbavy: Isdpfxoxf Silj Agloia * 2 kráľovské čapy * Pozinkovaná čelná stena, cca 400 mm vysoká * Doťahovanie zpredu a zozadu pomocou káblového diaľkového ovládania cez tlačidlá, s kontrolou vedenia náprav (bez inštalácie v ťažnom vozidle) * Elektrohydraulická jednotka * Manometer zaťaženia pre určenie zaťaženia nápravy vrátane diagramu zaťaženia * Na labutiom krku hliníkové bočné steny a zadná stena, nasúvacie, cca 2 440 x 400 mm (d x v). Zadné pozinkované zasúvacie stĺpiky sú odnímateľné. (Dĺžka nadstavby cca 2 560 mm) * Na labutiom krku samostatný vzduchový prípoj so vzduchovou pištoľou * 2 pracovné svetlá s prepínačom na náves, umiestnené na plošine labutieho krku vľavo a vpravo * INOX náradový box cca 1 350 x 400 x 400 mm na labutiom krku * 6 párov vreciek na stĺpiky pre zasúvacie stĺpiky cca 100 x 50 mm vo vonkajšom ráme ložnej plochy, 2 páry vo vonkajšom ráme podvozku * Pozinkované rozšírenia, vysúvateľné o cca 230 mm na každú stranu * Hydraulické prípojky z labutieho krku do nízkozdvižnej plošiny s multikonektorom namiesto skrutkových spojok. Bez záruky tesnosti * Centrálne maznanie s 2 čerpadlami BEKAMAX (Pico) s bežným tukom NLGI-2 a odnímateľnou ochranou okolo čerpadla * 2 páry vreciek WADER na kontejnery v ložnej ploche, na 1x20' kontajner * Odnímateľný pozinkovaný medzistôl s 1 párom WADER vreciek na kontejnery * 1 pár oceľových rámp na premostenie závesných hákov nízkozdvižnej plošiny * Na ložnej ploche je nanesená piesková vrstva proti pošmyknutiu * HRM metalizácia (High Resistance Metallisation)

Stav: použitý, celková hmotnosť: 39 500 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 07/2022, dĺžka ložného priestoru: 13 400 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 890 mm, Rok výroby: 2022, Výbava: ABS, lfd 12389 LOWBED TRAILER MAX TRAILER 3-axle F-S43-1AAF / EXTENDABLE 4500 mm / STEERABLE AXLE Manufacturer: MAX TRAILERS First registration: 07/2022 Dimensions: 13,400 x 2,540 x 890 mm Perm. total weight: 49,500 kg Unladen weight: 10,284 kg Payload: approx. 38,000 kg Fifth wheel load: 18,000 kg Air suspension, lift/lower function Drum brakes ABS EBS Mileage: 142,000 km Axle manufacturer: BPW 10.5 t Ijdpfx Asy Ag Adeglsia Lift axle Steering axle Trailing steer axle Lashing rings Superstructure paint: red Chassis paint: GALVANIZED/RED Tyres: 12 units Tyre tread depth: 7 – 10 mm Rear axle tyres 235/75 R17.5 MAX = FAYMONVILLE MAX 100 Ideal for concrete slabs / timber panels / precast concrete elements, etc. Ramp length 1200 mm / hardwood floor Rear loading edge 890 mm Lowered 840 mm Container locks for: 1 x 40/30ft and 20ft containers Incl. 4 x twistlocks Stanchion pockets and 5 t lashing rings on the loading area EXTENDABLE by 4,500 mm in 500 mm increments Central table can be removed TRAILING STEER AXLE ALUMINIUM AIR TANK / HOT-DIP GALVANIZED EXCELLENT CONDITION!!!! Currently, sample pictures from 06/2025 All information subject to change and prior sale! If you have any questions regarding this or other vehicles, please give us a call.