Noteboom Sahn Tieflader Normal - 4 Achs Nooteboom kúpiť použité (40 659)

Stav: nový, maximálna hmotnosť nákladu: 38 620 kg, celková hmotnosť: 50 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, T5 Profile 50.0: ----Brake: * Wabco EBS (electronic braking system) * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (when lifted, ride height +30 mm) * Last axle is self-steering (lockable from the cab for maneuvering purposes without truck-side installation, as well as via a switch on the trailer); lock must be disengaged before driving on public roads * Forced lifting and lowering of the lift axle for maneuvering (truck-side installation required) with speed-dependent control via EBS electronics ----Suspension: Iijdpsxptn Dsfx Aiaja * Air suspension with lift and lowering function, with RtR valve ----Drawbar: * Drawbar, 1,500 mm long, with 50 mm draw eye and manual height adjustment ----Electrics / Lighting: * Smartboard infotool with pressure sensors for total axle load display per axle group * Tire pressure monitoring with display option in the truck via EBS signal (without truck-side installation) * LED lighting system 12/24 V * LED beacon (removable) at rear ----General Attachments: * Mechanical warning sign kit for 3 m width * Toolbox made of galvanized steel approx. 650 x 300 x 600 mm, mounted on the left side * Plastic mudguards front axle and galvanized steel mudguard skirts rear axle ----Low Loader Platform: * Front section of bogie platform with 45° corners and 3 storage compartments with lockable folding lids (folding rearward) * Reduction of low loader platform by 500 mm to 6,280 mm including extension of offset cranking by 500 mm forward * Rubber covering on the folding frame, drive-on slope and running surface of the low loader platform * Bamboo wood between the longitudinal beams in front of the excavator stick recess ----Load Securing (LaSi Package): * 2 x 6.4 t lashing eyes at the front corners * 2 x 13.4 t UVV lashing points on each front and rear side corner * 5 x 10 t UVV lashing rings per side (swiveling, lowerable, loadable in all directions) * 4 stake pockets per side, each with a 2 t lashing option * 1 x 16 t UVV lashing ring on the rear cross member ----Extension: * Extending and folding extension beams for 3 m total width (timber carrier under the chassis on the right side) ----Excavator Stick Rest: * Continuous excavator stick rest with reinforcement profile from the last axle to the end cross member, approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides of the rest ----Ramps: * Hydraulic folding ramp with dual-circuit hydraulics and deployable tip section, approx. 4,650 x 720 mm, incl. load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump capacities from the truck of over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded 890 mm +/- 20 mm via air suspension ----Loading Platform Dimensions: * Platform above slewing ring: 2,600 + 390 x 2,520 mm * Low-bed platform: 6,280 + 500 x 2,520 mm, incl. 860 mm drive-on slope ----Painting: * Chassis, bogie, drawbar, extension consoles, and ramps hot-dip galvanized * Drawbar, axles, hydraulic axle supports, and air tanks painted in a shade of black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately*

Stav: použitý, pohotovostná hmotnosť: 10 650 kg, maximálna hmotnosť nákladu: 40 310 kg, celková hmotnosť: 50 960 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 10/2024, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 760 mm, zavesenie: vzduch, veľkosť pneumatiky: 205/65 R17.5, farba: sivý, Rok výroby: 2024, prevádzková hmotnosť: 10 650 kg, Výbava: ABS, For every used semi-trailer, you will receive a current and comprehensive inspection and functionality report. Gooseneck: - Gooseneck with 30 mm thick hardwood flooring - Rear straight gooseneck design - 3 pairs of lashing rings (LC 5,000 daN) Loading platform: - Extendable loading platform - 5 pairs of fold-out lashing rings (LC 5,000 daN) - 3 pairs of fold-out lashing rings (LC 10,000 daN) - 1 pair of flush-mounted lashing rings at the front of the loading platform (LC 10,000 daN) - Cut-outs in the external frame of the platform for attaching tie-down straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, over the axles covered with checker plate Axles and Tyres: - BPW axles, 2 fixed axles, 2 self-tracking axles - Air suspension, drum brakes, lifting/lowering function - Self-tracking axles with electro-magnetic reverse lock, can be activated by reverse gear or manually - Axle tools - Tyres 205/65 R17.5 Iijdpfxsxfa E Us Aiaea Brake System: - WABCO brake system in accordance with EU regulations, with EBS-E (4S3M) Steel Construction: - High-strength fine-grain steel construction - Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Painting: - First-class and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) top coat, single-color Novagrau Accessories included: - Spare wheel carrier in front of front wall - 2" king pin - Galvanized steel front wall approx. 400 mm high - At the galvanized front connection bar, yellow and red air couplings - 4 wheel chocks with holder on the front wall - Galvanized folding supports under the bevel of the platform - Bracket for beacon light at the rear of the semi-trailer - Zinc-plated extendable width extensions, approx. 230 mm per side - White reflective tape according to EU regulations on the sides, on the extension, and red at the rear - Gooseneck and rear plate each with a warning sign bracket including socket left and right - Mudflap at the rear - European reflective signs (red-yellow) at the rear of the semi-trailer - TPMS tire pressure monitoring system in accordance with ECE R 141 - On the gooseneck, removable ALU side walls and rear wall approx. 2,440 x 400 mm - Removable galvanized rear stanchions (body length approx. 2,560 mm) - 7 pairs of container locks: 1x 20ft container on the platform; 1x 40ft container on the platform; 1x 40ft container on the gooseneck; 2x 20ft containers - 7 pairs of pockets for plug-in stanchions 100 x 50 mm in the outer frame of the platform - Lifting axle at the front axle with TEBS E control, depending on the current axle load and cargo condition - Movable hanging rail for ALU loading ramps at the rear of the vehicle - On the checker plate on the gooseneck and platform, painted sand layer for anti-slip protection - Four extendable warning panels (approx. 400 mm extension), approx. 423 x 423 mm, each with a positioning light - Bracket for beacon on the warning panels - 80 km/h speed stickers at the rear and on both sides - Load gauge for determining axle loads including load chart - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel construction shot-blasted, then the defined visible surfaces metallized with ZINACOR 850 (Zinc 85% - Alu 15%), hot-finished

Stav: použitý, pohotovostná hmotnosť: 10 900 kg, maximálna hmotnosť nákladu: 43 600 kg, celková hmotnosť: 54 500 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 04/2025, dĺžka ložného priestoru: 8 700 mm, šírka ložného priestoru: 2 550 mm, výška ložného priestoru: 855 mm, veľkosť pneumatiky: 245/70 r17.5, farba: sivý, Rok výroby: 2025, prevádzková hmotnosť: 10 900 kg, Výbava: ABS, Gooseneck, rigid, in central tube design: - Enclosed outer frame with cutouts for lashing straps (LC 1,500 daN) - Steel flooring with anti-slip coating - Including perforated rail for aluminum approach ramps - 2" king pin - Mechanically operated BPW landing gear - 550 mm long, 8° bevel at the rear end of the gooseneck - Front bulkhead including stowage position for rear wall, 400 mm high - Spare wheel holder mounted upright at the front of the gooseneck - 3 pairs of recessed lashing rings LC 5,000 daN on the gooseneck deck - Aluminum drop-in sideboards, 400 mm high, consisting of 2x sideboards (length 3,150 mm) and rear board with stanchions (galvanized) - Rectangular storage box, aluminum, with folding lid and lockable, approx. 400 x 800 mm, centrally mounted - Storage box 45’, aluminum, with folding lid and lockable, approx. 400 x 800 mm, left side - Storage box 45’, aluminum, with folding lid and lockable, approx. 400 x 800 mm, right side Iiedpfx Asi Ai E Reiaja Load platform, single telescoping: - Enclosed outer frame with cutouts for lashing straps (LC 1,500 daN) - Fixed section at front 700 mm - Steel tread plate with anti-slip coating - Beveled transition between fixed section and load platform for attaching bridging rails and wheel recesses - Excavator recess including elongated holes for load securing (LC 1,500 daN), approx. 3,850 mm long - Prepared for hydraulic ramp (electric supply fitted) - Beams for extension to 3,000 mm width - Beveled vehicle rear, 8°, 550 mm long - Sled-type design for easy mounting and removal of ramps - Continuous rear mudflap - 1 pair of lashing points LC 10,000 daN centrally on the platform behind the gooseneck - 7 pairs of lashing points LC 10,000 daN on outer frame of the platform - 6 pairs of stake pockets 100 x 50 mm on the outer frame of the platform - 1 pair of lashing points LC 10,000 daN centrally at the rear of the platform - 1 pair of stake pocket rails approx. in the middle of the platform - 1 pair of stake pocket rails on the fixed section - 1 pair of stake pocket rails behind the last axle Ramps: - Hydraulic twin-fold ramps, 2,750+1,500x800 mm - Larch timber decking - Operated via remote control (either wired or wireless) - Ramps with quick-change (removal system) Chassis: - BPW ECO Max axle make - 2 ride heights - 4 axles, each 10 t (technically 12 t) - Twin tires 245/70 R17.5 - 2 rigid axles and 2 friction-steered axles - Reverse steering lock for friction-steered axles via reverse gear - Brake system make Knorr (in accordance with EU directives with EBS-E) - TIM G2 by Knorr (Trailer Information Module) - RSS (Roll Stability Support) - Load-dependent lift axle on the first axle including starting aid (forced lowering of lift axle via TIM possible) Accessories: - 4 wheel chocks with holder - 2 pairs of warning boards 423 mm x 423 mm, with 2 marker lights and mounting position for beacon, continuously adjustable up to 3,950 mm - Mounting options on gooseneck and platform (alternatively on ramp, if present) are included - Insertable bulkhead at the end of the excavator recess - Electro-hydraulic unit for ramp operation - Wireless remote control for ramp operation - Hydraulic stabilizer legs at vehicle rear for support during loading - 1 pair of additional reversing lights at the rear, activated with reverse gear - Larch wood extension beams (option)

Stav: použitý, maximálna hmotnosť nákladu: 29 400 kg, celková hmotnosť: 38 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 09/2007, ďalšia kontrola (TÜV): 04/2026, Výbava: ABS, * 1091 - ID vozidla pre telefonické dopyty * Výrobca: M&V, Typ: NPSL32 * Nízkozdvižný náves so „labutím krkom“ * ABS, EBS, BPW-Eco nápravy, bubnové brzdy, vzduchové odpruženie, 1. náprava zdvíhateľná, 2. a 3. náprava s hydraulickým núteným riadením, podvozok TRIDEC, náprava manuálne riaditeľná diaľkovým ovládaním, centrálne mazanie, koľajnica pre najazdové rampy * Zadná časť pneumaticky vysúvateľná o 1,50 m * TOP stav (podľa predchádzajúceho majiteľa: približne pred 3 rokmi nová podlaha a komplexne repasované!) * Technicky prípustná celková hmotnosť: 41 000 kg * Pneumatiky: 235/75R17,5 (9 mm) ----Naša e-mailová adresa: naše služby pre vás:   - Zabezpečenie dočasných alebo colných značiek   - Prevoz/dovoz vozidla po celej EÚ   - Colné odbavenie vozidiel pre tretie krajiny Ak máte otázky v ruskom jazyku, môžete volať na toto číslo * Iedeyt Alzopfx Aiaeia WhatsApp len pre rusky hovoriacich: * Whatsapp pre angličtinu, nemčinu a ďalšie jazyky:

Stav: použitý, maximálna hmotnosť nákladu: 84 000 kg, celková hmotnosť: 105 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 08/2000, Výbava: ABS, Vehicle Identification Number: ZCAS64M23Y0012202 Iedpfx Aex Txlleiajia HYDRAULIC SUSPENSION - Permissible total weight: 105,000 kg Fifth wheel load: 27,000 kg - Axle loads: 6 x 13,000 kg Unladen weight: 21,000 kg Roadworthiness inspection (RO HU) due Gooseneck length: 3,900 mm Fifth wheel height: 1,350 – 1,450 mm Low bed: Length: 13,550 mm (including 600 mm tapered section) -- Width: 3,000 mm -- Loading height: 920 mm EXTENDABLE (with sliding deck - 500 mm) Detachable rails Technical axle loads 6 x 13,000 kg ROR axles with drum brakes Axle 1 = LIFTABLE Axles 2, 3, 4, 5, 6 = FORCED STEERING Tyres: 9.5 R 17.5 Subject to prior sale, alterations, and errors. The description is for general identification purposes only and does not constitute a warranty in the legal sense of a sales contract. The authoritative specification is the description in the sales contract. Our offer does not include a new TÜV inspection as standard. If a new TÜV inspection is required, we will be happy to provide an offer from our partner workshops! The vehicle may have advertising stickers and/or signage. Our general terms and conditions of delivery and payment apply.

Stav: nový, maximálna hmotnosť nákladu: 26 500 kg, celková hmotnosť: 36 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 450 mm, šírka ložného priestoru: 2 550 mm, celková šírka: 2 550 mm, Rok výroby: 2026, Výbava: ABS, WIESE 3-axle low-loader with ramps and wheel recesses? NEW Available approx. 4 months after order ---Vehicle Data--- Manufacturer: WIESE * Model: WSA 3-36 TL * Year of manufacture: 2025 * Axles: 3 * Gross weight: 39,000 kg * Fifth wheel load: 12,000 kg * Axle aggregate load: 27,000 kg * Unladen weight: approx. 9,500 kg * Tyres: 235/70 R17.5 * Brake: WABCO EBS with RSS ---Dimensions--- * Loading platform length: 13,450 mm * Low-bed length: approx. 9,550 mm * Fifth wheel section: approx. 3,640 mm * Overall width: 2,550 mm * Loading height at low-bed: approx. 920 mm * Fifth wheel height: approx. 1,250 mm ---Equipment--- * 3 x SAF axles (9 t) with air suspension * 1st axle: lift axle * 3rd axle: trailing steering axle (lockable) Iiedpeyuq Igefx Aiaea * Electronic air suspension E-TASC * WABCO EBS braking system with Roll Stability Support * Tyre pressure monitoring system for 12 tyres * Full LED lighting * 4 x LED work lights * 15-pin socket + 2 x 7-pin sockets ---Body--- * Robust steel frame * 28 mm hardwood floor / Omega floor * 13 pairs of lashing rings (8,000 kg) * Additional lashing points (5,000 daN) * 2 pairs of wheel recesses * Excavator trough * Aluminium plug-in side boards on upper deck * Toolbox at the front ---Ramps--- * 2 x aluminium drive-on ramps * Dimensions: approx. 2,800 x 600 mm * Load capacity: 27,460 kg * Spring lifting mechanism * Laterally adjustable ---Miscellaneous--- * Warning panels for over-width up to 3 m * Contour marking in accordance with ECE-R48 * Technical documentation and TÜV inspection certificate We are happy to provide further information upon request.

Stav: nový, maximálna hmotnosť nákladu: 23 940 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2025, * T3 Profi 30.0: * EBS brake system * RDÜ tyre pressure monitoring system * Emergency release device for spring-actuated cylinders * Drum brakes * 3 x 11 t Gigant axles * Parabolic springs, mechanical axle equalisation at the rear * Side underrun protection * Swivel support legs at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanised steel skirts, each with spray protection * Reflective contour tape on sides and rear * Tool box made of galvanised steel sheet, black powder-coated, approx. 650 x 300 x 600 mm * Hinged lid (hot-dip galvanised) for tool box on turntable platform * Multi-voltage electrical system * LED rear lights * Removable rotating beacon at the rear * Drawbar with 50 mm draw eye and height adjustment via traction spring & turnbuckle * 15-pin electrical connector * 4 stake pockets on each side (stakes not included) with simultaneous lashing option * Load securing package comprising: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 6 pairs of UVV-compliant lashing rings, swivelling and retractable, loadable in all directions and recessed into the outer frame - 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not in the rear taper) * Widening boards stored in the centre of the loading area * One-piece hot-dip galvanised hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways Isdol Th I Ajpfx Aiaeia * 4-way control block for retrofitting hydraulic side ramp shift * Loading area over turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm drive-on taper) * Chassis, turntable, drawbar, and loading ramps hot-dip galvanised * Axles, springs, air tanks, etc. painted in black tone * 235/75 R 17.5 twin tyres * Unladen weight approx. 5,980 kg * Technical permissible gross weight of 30,000 kg * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from calendar week 11/2026

Stav: nový, maximálna hmotnosť nákladu: 23 940 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 Profi 30.0: * EBS braking system * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t Gigant axles * Parabolic springs, mechanical axle equalization at rear * Side underrun protection * Swing-down supports at the rear of the chassis frame Isdel Th Nnspfx Aiaeia * Mechanically adjustable warning sign packages front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel skirts, each with spray protection * Reflective contour tape on sides and rear * Toolbox made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Folding lid (hot-dip galvanized) for toolbox located on the bogie platform * Multi-voltage system * LED tail lights * Removable rotating beacon at the rear * Drawbar with 50 mm towing eye and height adjustment via draw spring & turnbuckle * 15-pin power connector * Four stake pockets per side (stakes not included), each with integrated lash-down points * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on main frame of bogie platform, 6 pairs of UVV-compliant swivel and retractable lashing rings, loadable in all directions and recessed into the outer frame – in corners 13.4 t, otherwise 10 t each * 6 pairs of mechanical fold-out outriggers for total width of 3 m (not in the rear tapered section) * Widening planks stored in the center of the loading area * Hot-dip galvanized, one-piece hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-section control block for retrofitting hydraulic sideways ramp displacement * Loading platform above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading platform: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach slope) * Chassis, bogie, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * Own weight approx. 5,980 kg * Permissible gross weight of 30,000 kg technically possible * New vehicle with manufacturer’s warranty * Errors and intermediate sale excepted * Available from calendar week 11/2026

Stav: použitý, maximálna hmotnosť nákladu: 14 010 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 09/2019, ďalšia kontrola (TÜV): 04/2028, Rok výroby: 2019, Výbava: ABS, Interné č. vozidla: VTC30017 Nemecké vozidlo Okamžite k dispozícii v našom areáli v Kaufungen - Kassel, Nemecko Viac INFO u: Iodpfoyrzl Djx Aiaeia * Luis Lucena (Nemecky, Anglicky, Španielsky, Francúzsky) * Viktoria Sologubova (Poľsky, Rusky, Ukrajinsky, Anglicky) Rozmery ložnej plochy: 6900 x 2550 mm Hydraulické rampy Nápravy: BPW Zmena a omyly vyhradené Radi vezmeme vaše ojazdené vozidlo do výmeny. Financovanie možné priamo u nás. GOLEC NUTZFAHRZEUGE GMBH Hovoríme: Nemecky, Anglicky, Španielsky, Poľsky, Ukrajinsky, Rusky, Bulharsky.

Stav: použitý, maximálna hmotnosť nákladu: 14 010 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 09/2019, ďalšia kontrola (TÜV): 04/2028, Rok výroby: 2019, Výbava: ABS, Interné číslo vozidla: VTC30016 Nemecké vozidlo Okamžite k dispozícii na našom dvore v Kaufungen - Kassel, Nemecko Viac info u: * Luis Lucena (nemecky, anglicky, španielsky, francúzsky) * Viktoria Sologubova (poľsky, rusky, ukrajinsky, anglicky) Rozmery ložnej plochy: 6900 x 2550 mm Hydraulické rampy Nápravy: BPW Zmena a omyly vyhradené Radi prijmeme vaše ojazdené vozidlo na protiúčet. Financovanie priamo u nás možné. Iiodpfsyrzlkjx Aiaja GOLEC NUTZFAHRZEUGE GMBH Hovoríme: nemecky, anglicky, španielsky, poľsky, ukrajinsky, rusky, bulharsky.

Stav: nový, konfigurácia náprav: 2 nápravy, zavesenie: vzduch, veľkosť pneumatiky: 245/70-17,5, Výbava: ABS, - EBS - LED osvetlenie - Hliníkové disky - Vzduchové odpruženie - Náhradné koleso - Skrinka na náradie - Centrálne mazanie - Prídavná riadená náprava PAVIC 2-nápravový nízkoložný lesnícky náves typ: STLT2Z na prepravu harvestorov----Na objednávku! Farba podľa výberu!!!! Hmotnosť na sedlový čap: 18 000 kg Nápravová záťaž: 24 000 kg (technická) Celková hmotnosť: 42 000 kg (technická) Prevádzková hmotnosť: 9 300 kg Vyrobené v Nemecku!!!! Podvozok je oceľová zváraná konštrukcia z vysokokvalitných jemnozrnných ocelí Kotviace oká 130 kN, 5 kusov na každej strane Ďalšie kotviace oká 3 páry na vyvýšenom lôžku Systém zásuvných stĺpikov zo zinkovanej ocele s hliníkovými bočnicami (strieborný elox) Oceľová čelná stena cca 400 mm vysoká Sklopné hliníkové nájazdové rampy s mechanickým istením Centrálne mazacie zariadenie SKF so zásobníkom (ovládané brzdovým svetlom), cca 20 mazacích miest Rozmery: Celková dĺžka: 16 000 mm Dĺžka ložnej plochy vrátane zadnej časti: 11 364 mm Výška sedla: 1 330 mm Svetlá výška v jazdnej polohe: 184 mm Prednastavenie sedla: 600 mm Rozmer R1 - od kráľovského čapu dopredu: 410 mm (rádius vybočenia) Rozmer R2 - od kráľovského čapu po rám: 2 150 mm (rádius vybočenia) Ďalšie rozmery na vyžiadanie (technický výkres) Nápravy: 2x 12 000 kg (technická) Gigant s bubnovou brzdou, spolu 8 kusov pneumatík 245/70 R17,5 na diskoch Alcoa Dura Bright Odpruženie: Pneumatické s funkciou zdvíhania a spúšťania Druhá jazdná výška + cca 50 mm nastaviteľná z kabíny. Pri rýchlosti 20 km/h sa vozidlo automaticky znova zníži. Vrátane manometra nápravového zaťaženia Závesné zariadenie: 2" kráľovský čap (vymeniteľný, jedna poloha) BEZ oporných nôh! -> Zákazníci zvyčajne používajú široké drevené hranoly pod prednú časť rámu. Brzdový systém: Wabco EBS s meraním zaťaženia náprav (Smartboard) vrátane počítadla kilometrov Parkovacia brzda: pružinový akumulátor Osvetlenie: Zadné svetlá: 2 páry (trojkomorové svetlo) Bočné označovacie svetlá LED Obrysové svetlá LED Predné a zadné pozičné svetlá LED Cúvacie a prídavné svetlo okrúhle Svetlo pre tabuľu s evidenčným číslom LED 1 ks prenosné majákové svetlo ovládané z kabíny samostatným spínačom 4 ks LED pracovných svetiel 4 ks značkovacích tabúl pre nadmerné šírky, dvojito istené (závitová páka a kolík) s LED červeno-bielym osvetlením Riadenie: Tridec HF-E (hydraulické vychylovacie riadenie na oboch nápravách) vrátane automatického vyrovnania a nastavenia do priamej polohy. Diaľkové ovládanie Tridec (bezdrôtové) možnosť použitia aj s káblom Lakovanie: Iiedpfxoyr Izxe Aiasa Kompletná oceľová konštrukcia je po zváraní tryskaná a základovaná špeciálnym haftprajmerom. Následne dvojzložkový lak v odtieni RAL. Nápravy a náboje kolies čierne alebo za príplatok v lakovaní podľa RAL. Ostatné prídavné diely sú pozinkované alebo lakované/povrchovo upravené práškovaním, prípadne z hliníka (s povrchovou úpravou alebo bez nej). Homologizácia: Vrátane posudku podľa §13 Vrátane posudku podľa §70 (zákazník musí dodať vhodné a schválené 3-nápravové ťažné vozidlo), vrátane okružnej jazdy pri TÜV Nord v Meppen. Toto je nezáväzná ponuka. Medzipredaj, omyly a zmeny vyhradené. Konfigurácia náprav Rozmer pneumatík: 245/70-17,5...

Stav: použitý, maximálna hmotnosť nákladu: 25 750 kg, celková hmotnosť: 36 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 01/2005, celková šírka: 2 550 mm, celková výška: 3 600 mm, Výbava: ABS, Goldhofer 2-nápravový nízkopodlažný náves * Gigant nápravy s bubnovými brzdami * Vzduchové odpruženie * Riadené nápravy * Výstražné majáky * Pracovné reflektory Ijdpfsyn Tu Asx Aiasia * Pneumatiky 235/75 R17,5 Upozornenie: Vozidlo bolo v roku 2025 repasované. Novo nalakované a technika kompletne prepracovaná. Pre ďalšie informácie sme vám k dispozícii.

Stav: veľmi dobrý (použitý), prvá registrácia: 05/2013, celková dĺžka: 123 500 mm, celková šírka: 2 550 mm, celková výška: 900 mm, farba: modrá, Rok výroby: 2013, Prevádzková hmotnosť: 9.100 kg Užitočné zaťaženie: 48.900 kg Celková povolená hmotnosť: 58.000 kg Technický stav: veľmi dobrý Optický stav: veľmi dobrý 4 NÁPRAVY S VZDUCHOVÝM ODPRUŽENÍM 2 RIADENÉ NÁPRAVY, 1 ZDVIHACIA NÁPRAVA 10.000 KG NA NÁPRAVU Iisdpfxsyuphfs Aiasa TECHNICKY POVOLENÁ CELKOVÁ HMOTNOSŤ: 58.000 KG ROZMER PNEUMATÍK: 245/70 R17.5 DĹŽKA LOŽNEJ PLOCHY: 855 CM + 335 CM LABUTÍ KRK ŠÍRKA LOŽNEJ PLOCHY: 255 CM VÝŠKA LOŽNEJ PLOCHY: 90 CM UPÍNACIE OKÁ A OKRÚHLE MISY

Stav: použitý, pohotovostná hmotnosť: 14 350 kg, maximálna hmotnosť nákladu: 48 650 kg, celková hmotnosť: 63 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 800 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Rok výroby: 2025, Výbava: ABS, With every used semi-trailer, you will receive a current and complete inspection and functionality report. Gooseneck: - Gooseneck in SNT design to optimize the loading deck length, length approx. 3,700 mm - Gooseneck rear with bevel approx. 1,000 mm x 10° Loading deck: - Telescopic loading deck, length approx. 8,800 mm, with rear bevel approx. 500 mm x 10° - Recess in the loading deck, including into the bevel, for accommodating the excavator dipper stick Ramps: - 1 pair of two-part steel ramps, each approx. 4,350 mm long and approx. 900 mm wide - Ramps with hardwood covering - Hydraulically foldable ramp tips - Each ramp can be hydraulically shifted approx. 235 mm outwards and approx. 215 mm inwards - Square anti-slip bars 20 x 30 mm, approx. every 200 mm on the outer frame of the ramp Axles and Suspension: - BPW axles and suspension, 1st axle with forced steering, all other axles with hydromechanical forced steering - Technical axle load: 12,000 kg - 1st axle with electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with raise and lower valve - Tires: 235/75 R 17.5 - TPMS tire pressure monitoring system Isdpfxoyrfn Nj Aiajia Accessories included: - Plug-in steel front wall, approx. 400 mm high - 3kW electro-hydraulic unit for controlling the hydraulic functions, excluding hydraulic cable winches - Parking position on the gooseneck for warning boards when not in use - 1 spare wheel - Outer side rail of the gooseneck with mounting holes for bolted lashing rings - First hole approx. 200 mm from the front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - 1 pair of horizontal lashing rings at the rear of the gooseneck - On the gooseneck, 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized - On the gooseneck, 1 plug-in ALU rear wall, approx. 400 mm high, anodized - Over the gooseneck approx. 40 mm thick hardwood floor, over the kingpin checker plate covering - 2" kingpin - Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide - Round NATO socket on the front connection panel - 4 wheel chocks - Mechanical landing gear with 2-speed gearbox and crank - Continuous 50 mm hardwood flooring on the loading deck, interrupted between the axles - Deck locking using conically welded locking profiles every 250 mm - Incl. pre-tensioning plate - 1 intermediate table, approx. 300 mm wide, for the telescopic tubes with large cross-section; intermediate table with stepped deck and extendable support rails for ALU bridging elements - 1 pair of lashing rings on the front cross-member - 8 pairs of recessed lashing rings in the outer frame of the loading deck, foldable outward - Extendable (galvanized) deck widenings approx. 230 mm per side - Wheel recesses with square anti-slip bars, 15 x 15 mm, continuously open in front of the axles up to the gooseneck cross-member, approx. 700 x 410 mm - ALU covers for the wheel recesses, which can also be used as bridging or widening planks for the telescopic section - ALU elements lockable on the telescopic tubes of the extensions - Widenable U-profiles for holding ALU covers - Wheel recesses with square anti-slip bars, 15 x 15 mm between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm - 1st axle with automatic lift axle function - 4 warning boards, approx. 423 x 423 mm - Radio and cable remote control

Stav: použitý, pohotovostná hmotnosť: 15 550 kg, maximálna hmotnosť nákladu: 47 450 kg, celková hmotnosť: 63 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 11/2024, dĺžka ložného priestoru: 8 800 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, Rok výroby: 2024, Výbava: ABS, For every used semi-trailer, you receive a current and complete inspection and functionality report. Gooseneck: - Gooseneck in SNT design for optimization of loading platform length, length approx. 3,700 mm - Gooseneck rear with bevel, approx. 1,000 mm x 10° Loading Platform: - Extendable loading platform, length approx. 8,800 mm, with rear bevel approx. 500 mm x 10° - A recess in the platform and in the bevel to accommodate the excavator bucket stick Iiedpfxoypb Aks Aiasa - Pneumatic locking system with conical locking bolts and reinforced locking positions - Hardwood covering on the platform bevel Ramps: - 1 pair of two-part steel ramps, approx. 4,350 mm long and approx. 900 mm wide - Ramps with hardwood covering - Hydraulically foldable ramp tips - Ramps can be hydraulically shifted individually approx. 235 mm outwards and approx. 215 mm inwards - 20 x 30 mm square climbing bars at intervals of approx. 200 mm on the outer frame of the ramp Axles and Suspension: - BPW axles and suspension, 1st axle self-steering, all other axles hydromechanically forced-steered - Technical axle load: 12,000 kg - Air suspension - Tires 235/75 R 17.5 - TPMS tire monitoring system - TPMS tire monitoring sensors Included accessories: - Plug-in steel front wall, approx. 400 mm high - 3kW electro-hydraulic unit for controlling hydraulic functions - 1 spare wheel - Outer beam on the gooseneck with mounting holes for bolt-on lashing rings - First hole approx. 200 mm from the front, thereafter approx. every 400 mm - 2 pairs of screw-in lashing rings included - 1 pair of flat lashing rings in the rear area of the gooseneck - On the gooseneck 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized - On the gooseneck, one plug-in ALU rear board, approx. 400 mm high, anodized - 2" king pin - Round NATO socket on the front connection rail - 4 wheel chocks - Mechanical landing legs with 2-speed gearbox and crank - 1 intermediate table, approx. 300 mm wide - 1 pair of lashing rings on the front cross member - 8 pairs of recessed lashing rings in the outer frame of the loading platform, foldable outwards - Extendable (galvanized) extensions by approx. 230 mm per side - Wheel recesses with square climbing bars, 15 x 15 mm, continuously open in front of the axles up to the crossmember of the gooseneck, approx. 700 x 410 mm - ALU covers for the wheel recesses - Lockable aluminum elements mounted on the extension tubes of the widening sections - Widenable U-profiles for placing the ALU covers - Wheel recesses with square climbing bars, 15 x 15 mm between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm - Lockable aluminum elements mounted on the extension tubes of the widening sections - 1 pair of mechanical rear supports - Remote steering from front and rear via cable remote, with single-track axle monitoring - 1st axle with automatic lift axle function and starting aid according to EU Directive 2021/535 - Under the gooseneck and on the rear crossmember left and right, each with a 7-pin socket with bracket for warning plates - Square climbing bars 20 x 30 mm, approx. every 200 mm on the outer frame of the platform bevel - Central lubrication system with 1 pump, brand BEKAMAX - Radio remote control for remote steering operation, in addition to cable remote - Wabco Smart Board System - 4 warning plates, approx. 423 x 423 mm, extendable by approx. 400 mm

Stav: použitý, maximálna hmotnosť nákladu: 19 080 kg, celková hmotnosť: 28 480 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 08/2025, ďalšia kontrola (TÜV): 08/2026, POZOR, používať len s vyklápacou hydraulikou! Nápravy BPW 10t, 2 riadené nápravy, POZOR, používať len s vyklápacou hydraulikou! Výška sedla 1,25 m, POZOR, používať len s vyklápacou hydraulikou! Výška sedla 1,25 m, hydraulicky 1400x700 + manuálne 700, Iisdpfx Asykgkcjiaja

Stav: použitý, maximálna hmotnosť nákladu: 23 360 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 06/2008, Rok výroby: 2008, Výbava: ABS, Hydraulicky sklopné dvojité rampy, rozšíriteľné Iodpfox Sb D Iex Aiaoia Stav: miestami hrdza, inak dobré

Stav: nový, maximálna hmotnosť nákladu: 18 400 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 5 900 mm, šírka ložného priestoru: 2 500 mm, výška ložného priestoru: 860 mm, celková šírka: 2 520 mm, Celková hmotnosť: 24 000 kg / 30 000 kg Prevádzková hmotnosť: 5 600 kg Užitočné zaťaženie: 18 400 / 24 400 kg Celková dĺžka: 10 290 mm Dĺžka ložnej plochy: 5 900 mm vrátane zadného nábehu Šírka: 2 520 mm Ložná výška: 860 mm Ďalšie informácie plus predprava / príprava na odbernom sklade 26639 Wiesmoor 1 280,00 €/netto Iijdsynvrwjpfx Aiaoa Podvozok nízkoložného prívesu Oceľová zváraná konštrukcia Otočný tanier s robustným guľovým ložiskom Sklopná zadná podpera 2 podložné kliny s držiakom Zadné blatníky po celej šírke (nie v kombinácii s držiakom na vysokozdvižný vozík) 1 plastový náradový box, šírka = 600 / výška = 425 / hĺbka = 460 mm, uzamykateľný Príprava na rozšírenie na 3 000 mm (otvory v vonkajšom ráme s krytkou, nie v zadnom nábehu) Zaisťovacie oká nízkoložného prívesu 1 pár zaisťovacích výrezov v prednom pozdĺžniku na ohybe, každý 10 t 7 párov zaisťovacích hríbov hore a po bokoch vo vonkajšom ráme, každý 10 t 1 x vpredu na ohybe 5 x na nízkej ploche 1 x v zadnom nábehu 12 párov zaisťovacích otvorov vo vonkajšom ráme, každý 5 t (na uchytenie upínacích pásov) 5 x ohyb, 6 x nízka plocha a 1 x zadný nábeh Ťahacie zariadenie prívesu s otočným tanierom Ťažné oje so skúšaným 40 mm ťažným okom Nastavenie výšky ťažného oja pomocou pružiny Nápravy a odpruženie Bubnové brzdové nápravy podľa výberu výrobcu Laserové meranie náprav / podvozku – znižuje opotrebenie pneumatík a spotrebu paliva Parabolické odpruženie s bezúdržbovým oceľovo-gumovým uložením a mechanickým vyrovnávaním náprav (kolískový vyrovnávač) Kolesá a pneumatiky 235 / 75 R 17,5" podľa výberu výrobcu Oceľové disky v dvojitej montáži, továrenská strieborná farba Brzdový systém Dvojhadicový vzduchový brzdový systém Pružinová parkovacia brzda 2 nezameniteľné brzdové hlavice vpredu s prepojovacími vedením k ťažnému vozidlu, vedenia predĺžené cca o 60 cm bez ABS, ale s mechanickým ALB, max. povolená rýchlosť 60 km/h Elektrika 12 V, viackomorové svetlá, bez bočného žltého LED osvetlenia, po bokoch odrazky 2 biele pozičné svetlá vpredu 2 bielo/červené obrysové svetlá vzadu 1 x 7-pólová 12 V zásuvka vpredu s prepojovacím káblom, predĺžené cca o 60 cm 1 LED maják s držiakom, ovládaný cez parkovacie svetlo (maják snímateľný) 2 páry výsuvných a osvetlených výstražných tabúľ na 3 000 mm Podlaha Predný ohyb s oceľovým/riflovaným plechom Úložný box je zapustený do nábehu k ohybu potom cca 70 mm mäkké drevo, v oblasti blatníkov oceľový/riflovaný plech Zadný nábeh so 70 mm mäkkým drevom Nízka ložná plocha vrátane zadného nábehu 5900 mm Najazdové rampy Oceľové rampy cca 3 000 mm dlhé, 750 mm široké, bočne nastaviteľné so drevenou výplňou (vrcholová časť s oceľovým/riflovaným plechom) Hydraulicky ovládané cez pomocný pohon ťažného vozidla s tlmičom, ovládanie bočne vľavo v smere jazdy Hydraulické pripojenie s SVK konektorom NW 10/3 vrátane spojovacej hadice Prevádzkové poznámky Pri 10 000 kg zaťažení nápravy je potrebné výnimočné povolenie, možný je len nedeliteľný náklad!!! Uvedená celková hmotnosť je technicky možná, v závislosti od nákladu nemusí byť možné dosiahnuť celkovú hmotnosť pri dodržaní povolených hmotností na nápravy, oje a sedlo. (Zlé jazdné a riadiace vlastnosti pri nesprávnom rozložení nákladu sú možné) Krajina schválenia/ EČV Krajina schválenia: Nemecko s Dekra schválením a posudkom na max. 60 km/h, ťažné vozidlo LoF, (V krajine schválenia Švajčiarsko max. 40 km/h možné) pripravené na dvojriadkové držiaky ŠPZ bez obrysového značenia/ reflexných pásov podľa ECE R 048 Lakovanie Rám žiarovo pozinkovaný

Stav: použitý, maximálna hmotnosť nákladu: 17 200 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 10/1999, dĺžka ložného priestoru: 8 650 mm, šírka ložného priestoru: 2 500 mm, výška ložného priestoru: 900 mm, celková šírka: 2 550 mm, Celková dĺžka: 10 910 mm Dĺžka ložnej plochy: 8 650 mm Šírka: 2 550 mm / ložná šírka cca 2 500 mm Výška nakladania: 900 mm Ďalšie informácie: - Dvojmontáž pneumatík 235/75R17,5 Iijdpsynrc Eefx Aiaea - Nápravy BPW - Sklopné zadné oporné nohy - 4 zasúvacie stĺpiky - Nájazdové rampy z hliníka 2 400 mm - Kotviace oká vo vonkajšom ráme

Stav: nový, číslo stroja/vozidla: c78894767223a51dd199030f3, pohotovostná hmotnosť: 4 600 kg, Ďalšie informácie Rám Oceľová zváraná konštrukcia z jemnozrnnej ocele, žiarovo zinkovaná, rovná plošina bez zvýšeného okraja, zníženie ložnej plochy za zadnou nápravou cca o 8° smerom nadol. Pozdĺžne nosníky z oceľových profilov, oceľový rám žiarovo zinkovaný, s NIRO plechom na zalomení ako vedenie lana v jednej rovine s podlahou. Pre nákladné vozidlá s rázvorom: medzi 2. a 3. osou 1795 mm / medzi 2. a 3. osou 4105 mm a medzi 3. a 4. osou 1350 mm. Ťažné zariadenie Ťažné zariadenie s guľovou hlavou D24,8 (výška od zeme po horný okraj cca 480 mm), ťažná kapacita 2800 kg, vrátane montáže a elektroinštalácie so 7-pólovou zásuvkou. Príslušenstvo/Úpravy 2 držiaky na podkladové kliny, bočná ochrana proti podbehnutiu z hliníka, sklopná – preberá sa z nákladného vozidla! Ochrana proti podbehnutiu zo strany z ocele, blatníky (štvrťkruhové) s ochrannými zásterkami – preberá sa z nákladného vozidla! Isdpfx Aijk Unitoajia Úložné boxy Plastový náradlový box so zásuvkou a vnútornou policou, šírka=650 mm / výška=520 mm / hĺbka=670 mm, uzamykateľný visiacim zámkom (zámok nie je súčasťou dodávky). 1 držiak na 3 ks. kanistrov na benzín. 1 úložný box z nehrdzavejúcej ocele, šírka=600 mm / výška=400 mm / hĺbka=500 mm, leštené dvierka, uzamykateľný, obsahuje ovládací ventil a elektrohydraulickú agregáciu čerpadla. Ovládací box s obvodovým tesnením dvierok a tesniacimi manžetami na zadnej strane (striekaný podľa technických možností). Elektrická výbava Úprava existujúceho zadného osvetlenia, 2 ďalšie LED pracovné svetlá zapustené v čelnej stene, spínané cez obrysové svetlo a vypínač na ľavej strane čelnej steny zvonka; 1 LED pracovné svetlo vzadu s integrovanou cúvacou kamerou, vrátane farebného plochého monitora, obrazovka s držiakom na prísavku, napájanie 24 V s meničom napätia 24/12 V, 1 zásuvka 7-pólová, 12 V = adaptér Podlaha Mega Grip z ozubených pozinkovaných roštov, oceľové rošty 50/4 mm so sieťovaním 50 mm. Vrchná strana s protišmykovým zúbkovaním, pokrytá kontinuálne po celom hlavnom plošnom ráme. Kotviace okuliare 12 párov voľne otočných kotviacich krúžkov na vonkajšom ráme, každý 10 ton, po jednom celkom vpredu a posledný úplne vzadu. 1 ks upevňovacieho oka celkom vzadu v strede na uchytenie lanového navijáka. 12 ks upevňovacích očiek zapustených v strede podlahy, každé 5 ton (nie je súčasťou zadného skosenia). Čelná stena Čelná stena z oceľového plechu, výška 1500 mm, pevná s rohovými stĺpmi v úrovni prednej steny. Po 2 x 12 ks závesných strmeňov na upínacie reťaze vľavo a vpravo na čelnej stene. Lanový navijak Elektrický lanový navijak, 24 V, ťažná sila cca 6 350 kg, montovaný v strede pri čelnej stene (zapustený do ložnej plošiny), ovládateľný diaľkovým ovládačom, lano min. 35 m x 9,5 mm, s vodiacim oknom, pritlačnou doskou, vrátane ochrany proti preťaženiu, voľnobežnou spojkou, ručným ovládačom s približne 5 m ovládacou pákou, technická skúška a certifikát civilného inžiniera, preberací protokol, návod na obsluhu. Najazdové rampy Dĺžka 3500 mm, dvojdielne (2000 mm + 1500 mm), šírka 850 mm, nosnosť 20 000 kg/pár (aj pri nakládke po rampách), elektrohydraulicky sklopné a bočne posuvné – vrátane elektrohydraulického čerpacieho agregátu. Uhol najazdu cca 8° pri spustenej zadnej náprave. Oporná plocha rámp z pozinkovaných oceľových roštov (ako podlaha ložnej plošiny), s protišmykovým zúbkovaním. Rampy možné zasunúť na cca 170 mm, hydraulické vysúvanie rámp. Rampa pripravená aj na nakládku z nakladacej rampy s plnou nosnosťou. Uzamykanie rámp pomocou 2 napínacíc

Stav: nový, pohotovostná hmotnosť: 12 000 kg, maximálna hmotnosť nákladu: 54 000 kg, celková hmotnosť: 66 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 245/70 R 17.5, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable loading platform design: - Extendable loading platform with rear chamfer approx. 1,000 mm x 8° - 5 pairs of fold-out lashing rings (LC 5,000 daN) - 3 pairs of fold-out lashing rings (LC 10,000 daN) - 1 pair of recessed lashing rings in the front loading area (LC 10,000 daN) - Cut-outs in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) - Hardwood flooring approx. 48 mm thick, over the axles with tread plate covering Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox, 24 t lifting capacity (50 t test load) Brake system: - WABCO braking system compliant with EU regulations with EBS-E (4S3M) Steel structure: - Steel structure made from high-strength fine-grained steels Axles and tyres: - BPW axles and suspension, 1st axle rigid, all other axles hydro-mechanically forced-steered - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Axle tool - TPMS tyre pressure monitoring system in accordance with ECE R 141 - Tyres 245/70 R 17.5 3PMSF Accessories included: - 2" king pin - Galvanised steel front wall approx. 400 mm high - At the galvanised front connection plate: yellow-red air couplings Iijdpfoykpbkjx Aiasa - 4 wheel chocks with holder on the front wall - 1 spare wheel with holder in front of the front wall - Electro-hydraulic power unit - Forced steering, front and rear, operated via cable remote control with push buttons, with tracking control for the axles - European reflector plates (red-yellow) at the rear of the trailer - White reflective tape on the sides and the extension, red at the rear, in accordance with EU regulations - On gooseneck and rear left and right: holder for warning boards including socket - Galvanised, extendable width extensions, ca. 230 mm per side - Holder for beacon at the rear of the trailer - Galvanised folding supports under the rear chamfer of the loading platform - Mudflap at the rear - Operating manual and description on USB stick - Central lubrication system BEKAMAX (Pico) with standard lubrication grease NLGI-2 and removable guard around the pump - Plug-in ALU side boards and rear board on the gooseneck approx. 2,440 x 400 mm - Rear galvanised stakes are removable (body length approx. 2,560 mm) - INOX toolbox 1,350x400x400 on the gooseneck (note: box covers oil filler cap) - 4 pairs of WADER container pockets in the loading area for 1x 20ft, 2x 20ft, 1x 40ft, or 1x 45ft container - 7 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area - Sliding hook-in crossbar for ALU drive-on ramps at the rear - Square climbing bars 20 x 20 mm every 200 mm on the outside frame of the rear chamfer - Lift axle on the front axle with control via TEBS-E depending on axle load and current loading condition - Four warning boards extendable by approx. 400 mm, approx. 423 x 423 mm with a position light - Holder for beacon on the warning boards - Radio remote control for forced steering, in addition to cable remote, with indicator lights on receiver as single-track control - Non-slip sand coating painted onto tread plates on gooseneck and loading area - Speed stickers 80 km/h at the rear and on both sides - Load gauge for determining axle loads, including load diagram

Stav: nový, pohotovostná hmotnosť: 15 550 kg, maximálna hmotnosť nákladu: 47 450 kg, celková hmotnosť: 63 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 800 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck in SNT design for optimizing loading area length, approx. 3,700 mm long - Rear gooseneck with approx. 1,000 mm x 10° bevel Loading Area: - Extendable loading area, approx. 8,800 mm in length, with an approx. 500 mm x 10° bevel at the rear - A recess in the loading area and the bevel, designed to accommodate the excavator stick - Pneumatic locking with conical locking bolts and reinforced locking positions - Hardwood decking on the beveled section of the loading area Ramps: - 1 pair of two-part steel ramps, approx. 4,350 mm long and 900 mm wide - Ramps with hardwood decking - Hydraulically foldable ramp ends - Each ramp hydraulically adjustable outwards by approx. 235 mm and inwards by approx. 215 mm - Square climbing bars 20 x 30 mm, positioned approx. every 200 mm on the outer frame of the ramp Axles and Suspension: - BPW axles and suspension, 1st axle steering ahead, all other axles hydromechanically forced steered - Technical axle load: 12,000 kg - 1st axle with electromagnetic reverse lock, activated via reverse gear and also manually - Air suspension with lift and lower valve - Twin tires 235/75 R 17.5 - TPMS tire pressure monitoring system according to ECE R141 - TPMS sensors mounted on all wheels including spare wheels Accessories included: - Plug-in steel front wall, approx. 400 mm high - 3kW electro-hydraulic power unit for hydraulic operations, excluding hydraulic winches - Parking location on the gooseneck for warning panels when not in use Isdpfx Aijk Aht Uoajia - 1 spare wheel - On the gooseneck: 1 pair of plug-in anodized ALU side boards, approx. 400 mm high - Plug-in anodized ALU rear board on the gooseneck, approx. 400 mm high - On the gooseneck: approx. 40 mm thick hardwood decking, over the kingpin tread plate covering - 2" kingpin - Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide - 4 wheel chocks - Mechanical landing gear with 2-speed gearbox and crank - JOST Modul B – static test load = 50,000 kg - 1 intermediate table, approx. 300 mm wide - Extendable galvanised outriggers, approx. 230 mm per side - Wheel recesses with square climbing bars - ALU covers for the wheel recesses - 1 pair of mechanical rear supports - Remote steering system operable from the front and rear via cable remote control, with single-track control for axles - 1st axle with automatic lift axle function - Central lubrication system with 1 pump, brand BEKAMAX - Radio remote control for rear steering, additional to the cable remote, with 2 indicator lights on receiver for single-track control - Wabco Smart Board System - 4 warning panels, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and brackets for rotating beacon

Stav: nový, pohotovostná hmotnosť: 29 600 kg, maximálna hmotnosť nákladu: 72 400 kg, celková hmotnosť: 102 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 6 650 mm, šírka ložného priestoru: 2 840 mm, výška ložného priestoru: 550 mm, veľkosť pneumatiky: 285/70 R19.5, farba: sivý, prevádzková hmotnosť: 29 600 kg, Výbava: ABS, Gooseneck: - Hydraulically liftable/lowerable and detachable gooseneck - Length approx. 3,650 mm - For tractor units: 6 x 4 or 8 x 4 2-Axle Front Bogie: - Hook couplings front and rear - Chassis length x width approx. 2,200 mm x 2,850 mm Excavator Deck “BB-A”: - Telescopic excavator deck “BB-A” with drive-over deck hooks at the front and pin & lug coupling at the rear - Length x base width approx. 6,650 mm x 2,850 mm - Beam height x beam width approx. 400 mm x 1,350 mm - Loading height 550 mm with 150 mm ground clearance 4-Axle Rear Bogie: - Mechanical pin & lug coupling at the front for attaching a lowbed, end cross-member at the rear - Chassis length x width approx. 5,480 mm x 2,850 mm - Extensive lashing positions Pendulum Axle and Tyres (front and rear chassis): - “PENDULUM AXLE”, all axles hydro-mechanically forced steered - Burst protection valve on axle compensation cylinder with automatic reset function - Hydraulic cylinders with shut-off valves and locking pins to secure in lifted position - Final axle coating with 2 coats of 2K paint, single colour in MB 7350 Novagrau - Technical axle load: 12,000 kg - Hydraulic axle balancing - Tyres: 285/70 R19.5 Follow Steering: - Remote steering from front and rear via cable remote control with push buttons, including single-track steering monitoring - Socket on gooseneck for steering control Iiedpfxswcmhaj Aiasa - Cable remote with push buttons and single-track control included Accessories included: - Galvanised connection bar at the front with yellow/red air couplings - Steel front wall approx. 400 mm high - 4 wheel chocks - 3.5" king pin - One 7-pin socket left and right at the rear of the gooseneck for warning panel - A-frame with winch for spare wheel at front end of gooseneck - Truck hydraulic connection with flow regulator (40 l/min), including bracket for supply line suspension; tractor fuel tank must be at least 80 litres, incl. couplers - Detachable ALU side walls and rear board on gooseneck, approx. 400 mm high, anodised - Control lever on gooseneck protected by a foldable cover - Separate air connection with blow gun on gooseneck - BEKAMAX central lubrication system, 1x on gooseneck, 1x on 2-axle bogie, 1x on 4-axle bogie - Variomax tool kit - Multi-coupler hydraulic connections on gooseneck and at lowbed hook bracket - 2 spare wheels - One 7-pin socket left and right, front and rear on rear chassis for warning panel - Front chassis with separate air connection for pneumatic screwdriver - Folding widening extenders with steel panels, width adjustable from approx. 2,850 mm to 3,250 mm - Steel panels can be positioned in two places to create a lowered loading platform - Steel panels with approx. 12 mm rubber floor covering - Threaded bushings (⌀ 40 mm) spaced approx. every 500 mm on the outer flange of the excavator deck for lashing rings - One locking position approx. every 500 mm on the extension with mechanical locking - Socket on rear chassis for cable remote control steering - 2 reversing lights on rear panel - Four warning panels, extendable by approx. 2,000 mm each, approx. 423 x 423 mm, with position light - 1 work lamp left + right on rear panel of gooseneck, separately switchable - Two INOX toolboxes, approx. 855 x 340 x 390 mm - 1-cylinder Hatz diesel engine (Silent Pack) - Radio remote control for follow steering

Stav: nový, pohotovostná hmotnosť: 13 500 kg, maximálna hmotnosť nákladu: 51 500 kg, celková hmotnosť: 69 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 800 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 r17.5, farba: sivý, Výbava: ABS, Gooseneck: Gooseneck in SNT design for optimizing the loading platform length; length approx. 3,700 mm. Gooseneck rear bevel approx. 1,000 mm x 10°. Loading platform: Telescopic loading platform, length approx. 8,800 mm, with rear bevel approx. 500 mm x 10°. Recess in the bevel as well as extending into the loading platform to accommodate the excavator's bucket linkage. Pneumatic locking with conical bolt and reinforced lock positions. Supply lines are protected within the telescopic beam and adapt to the respective platform length. Ramps: 1 pair of two-part steel ramps, approx. 4,350 mm x 900 mm. Hydraulically folding ramp tips. Each ramp can be hydraulically shifted approx. 235 mm outward and approx. 215 mm inward. Axles and suspension: BPW axles and suspension, two rigid axles, two self-steering axles. Electromagnetic reverse lockout, activated via reverse gear and manually. Air suspension with raise/lower valve. Axle tools. Tyres: 235/75 R17.5 3PMSF, dual-mounted. Load index: 143/141J (144/144F). Braking system: WABCO brand braking system, EBS-E, compliant with EU regulations. Lighting system: 24-volt lighting system in "ASPÖCK-NORDIK full LED." Metal finishing: Standard HRM metallization of the outer frame. Complete steel structure shot-blasted, then all defined visible surfaces hot-coated with ZINACOR 850 (zinc 85% - aluminum 15%). Steel structure: Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Welders certified to DIN-EN 287-1. MAG welding method according to EN ISO 4063. Protective gas M21 according to EN ISO 14175. Standard accessories included: Removable front wall, steel, height approx. 400 mm. ASPÖCK-UNIBOX at the front connection strip with 24N, 24S, & 15-pin sockets. 24N connection per ISO-118524S connection per ISO-373115-pin connection per ISO-12098. Round NATO socket at the front connection strip. Power cable for supplying the electro-hydraulic unit and/or electric winch (35 mm², 3.5 m long) between trailer and truck tractor with connector (NATO-NATO). 3 kW electro-hydraulic unit for operating hydraulic functions, except hydraulic winches. 1 spare wheel with mounting adapter. External beam of gooseneck with fixing holes for bolted lashing rings; first hole approx. 200 mm from the front, then every approx. 400 mm. 2 pairs of screw-in lashing rings included. Fixing hole at the upper rear of the gooseneck external beams for a bolted lashing ring. 1 pair of screw-in lashing rings. Approx. 40 mm thick hardwood flooring over the gooseneck. On the gooseneck, 1 pair of removable, anodized aluminum sideboards, approx. 400 mm high. On the gooseneck, 1 removable anodized aluminum rear wall, approx. 400 mm high. 2” king pin. Iiedpfx Aek Ahugsiaoa Guide plate on gooseneck for fifth wheel plate, approx. 500 mm wide. 4 wheel chocks with holders. Mount for aluminum approach ramps. Mechanical landing legs with 2-speed gearbox and crank. Approx. 50 mm hardwood floor, continuous on the platform and interrupted between the axles. Platform locking with conically welded locking profiles every 250 mm, including pre-tensioning plate. Long holes at the front of the loading platform for hook-in and relocatable bridging elements. 1 intermediate table with recessed platform, approx. 300 mm wide for the extension tube with large cross-section with steel covering. Front and rear with long holes...

Stav: nový, pohotovostná hmotnosť: 13 250 kg, maximálna hmotnosť nákladu: 47 550 kg, celková hmotnosť: 60 800 kg, konfigurácia náprav: 3 nápravy, zavesenie: vzduch, veľkosť pneumatiky: 245/70 r17.5, farba: sivý, Výbava: ABS, Gooseneck: Gooseneck with rear chamfer of approx. 750 mm x 10°. 3 pairs of lashing rings 30 mm thick hardwood flooring Extendable loading platform: Extendable loading platform with rear chamfer of approx. 1,000 mm x 8° 5 pairs of hinged lashing rings (can be folded outward) 3 pairs of hinged lashing rings (can be folded outward) 1 pair of horizontal lashing rings at the front of the loading platform Cutouts in the outer frame of the loading platform for hooking in tensioning straps Hardwood floor approx. 48 mm thick, anti-slip checker plate over the axles Two-part steel ramps: One pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood overlay. Ramps with hydraulically extendable and retractable ramp sections, hydraulic lifting device, and hydraulically adjustable. Maximum load capacity per pair: 40,000 kg Landing legs: JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test capacity) Axles and tires: Iiodpfx Ajl Uxdkeiaja BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanical forced steering Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tools Tires: 245/70 R 17.5 Brake system: Brake system compliant with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit Steel construction: Steel construction made of high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Paintwork: Top-quality, durable corrosion protection of the standard shot-blasted welded frame guaranteed by a two-component (2K) zinc-rich primer High-quality single-color 2-component (2K) top coat in Nova Grey Rear section metalized and painted in RAL 9010 (pure white) No metallic paints possible Electrical system: Electrical system according to EU specifications, 24 volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets Connection as per ISO 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Accessories included: 2" kingpin Galvanized steel front wall approx. 400 mm high Yellow-red air couplings on the galvanized connection bar at the front 4 wheel chocks with holder at the front wall One spare wheel with holder in front of the front wall Electro-hydraulic power pack Remote steering from front and rear via cable remote control with push-button operation and single trace axle control Mount at the rear of the gooseneck for ALU loading ramps European reflective panels (red-yellow) at the rear of the trailer White reflective striping according to EU regulations at the side, at the extension element, and rear in red On the gooseneck and ramps left and right, each with one bracket for warning signs including socket A bracket for a revolving beacon at the rear of the trailer Galvanized folding supports under the chamfer of the loading area Control valves for ramps mounted on the right side of the trailer Cover plates for bridging the gap between ramps and loading area One mudflap at the rear of the trailer Manual and documentation on USB stick Central lubrication system BEKAMAX (Pico) with standard NLGI-2 grease and removable pump guard On the gooseneck, removable ALU side boards and rear board approx. 2,440 x 400 mm Rear galvanized removable stanchions, body length approx. 2,560 mm A toolbox INOX 1,350x400x400 on the gooseneck, box covers oil fill 4 pairs of WADER container locks in the loading platform for one