Nízkopodlažný náves

GOLDHOFER Top-Zustand, 2-Achs Tieflader mit Rampen

Stav: nový, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 10 636 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 2 300 mm, objem nakladacieho priestoru: 60 m³, Chassis manufactured using self-supporting ALU (aluminium) construction with corresponding reinforcements in the lower flange for especially high stability and strength. Aggregate chassis made of ALUMINIUM with a frame height of 140 mm! (max. 39 tonnes). Axles and Suspension "Disc brakes 22.5": 3 x 9 tonne Jost axle units with DC air suspension, raising and lowering, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the tractor unit (without tractor unit equipment), 1st and 3rd axle separately liftable with starting aid (without tractor unit equipment), 3rd axle also with Optiturn, ECAS air suspension, Wabco Trailerpulse tyre pressure monitoring with ZF rim-mounted sensors. Iedjfakkcepfx Aafjaw Tyres and Wheels: 6 wheels with tyres size 385/65 R 22.5, manufacturer’s choice. Alcoa aluminium rims DuraBright 11.75x22.5 ET 120. King pin bolted into a 10 mm thick plate. Landing Legs: aluminium drop legs, 2 x 10 t load capacity, for air suspension we use swivel feet. Brake System: according to E.G. standard, two-line brake system, Wabco EBS electronic braking system with RSS (Roll Stability Support), spring-loaded brake system acting on two axles, operated at the rear, aluminium air reservoir system, premium modulator. Electrical System: according to the German Road Traffic Licensing Regulations (StVZO) with 2 LED five-chamber lights (Aspöck Europoint LED) integrated into the aluminium rear panel, 24-volt system with 1x 5-pin and 2x 7-pin socket, with side LED marker lights, 2 separate LED work lights at the rear, 2 LED work lights from the 1st support leg height, 1 internal LED work light at the front left, operated from outside. Body/Tipping Body "Fully welded interior construction": Front wall load 17,250 dkn, rear and side walls 10,250/13,400 dkn Aluminium tipper body, side walls made of 30 mm thick ALU plank profiles (2-3 mm), fully welded, 600 mm wide, with lower and upper flange, plank profiles fully welded on the inside, floor designed as a moving floor system fitted on 140 mm ALU cross members, floor load approx. 7 t/m², tightly spaced cross members (approx. 350 mm), ALU headboard with 600 mm plank profile 2-3 mm thick, straight design, special slanted ALU corner profiles, smooth straight rear wall with 2 ALU swing doors 50/30 mm thick, 4 vertical locking rods in welded ALU rear frame fitted with Teflon and stainless steel bearings, movable ALU wall hanging on the reinforced ALU upper flange with Kevlar cover for complete emptying, side brush sealing and additional side Kevlar cover, integrated discharge funnel with folding cover plate at rear left, externally operated, viewing window rear left, one sample slide per rear door (total 2), service door front left. Hydraulic system: "Cargo Floor" moving floor system integrated in the floor with hydraulically operated ALU profiles on ALU square tubes with around 670 PE-HD slide shoes, floor thickness approx. 6 mm, hydraulic stroke approx. 200 mm, fixed connections at the headboard, separate possibility for connecting hydraulic lines under the vehicle with fixed connections, pipe size NW 21, fixed connections with size and design yet to be specified, operating pressure 190–240 bar max., aluminium end pieces welded into floor, electric operation rear left with cable remote control in a lockable waterproof box. Accessories: PVC mudguards with rubber mud flaps, aluminium spare wheel holder, side ALU underrun protection, folding type, 1 tool box approx. 800x460x430 mm, plastic, approx.

Stav: nový, maximálna hmotnosť nákladu: 67 200 kg, celková hmotnosť: 85 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, You can find our complete vehicle inventory, including immediately and soon-available vehicles, on our website. Excerpt from equipment. Full specification available on request. GOOSENECK * Gooseneck in SNT design to optimize platform length, approx. 3,700 mm long, rear tapered approx. 1,000 mm x 10° * For tractors: 6x2, 6x4, and 8x4 short wheelbase * Steel front wall, removable, approx. 400 mm high * 3 kW electro-hydraulic power pack for controlling hydraulic operations, except for hydraulic winches * Outer beams of gooseneck with mounting holes for bolted lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of removable ALU side walls, approx. 400 mm high, anodized * 1 removable ALU rear wall, approx. 400 mm high, anodized * Over the gooseneck, approx. 40 mm thick hardwood floor; over the king pin, checker plate floor * 3.5-inch king pin Iaodpfxergzv Nj Aafow * Guide plate from gooseneck for fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow control, incl. cabling bracket for supply lines (Faymonville couplings) * 2 pairs of stake pockets recessed into the gooseneck for approx. 100 x 50 mm plug-in stakes PLATFORM * Extendable platform, approx. 11,000 mm long, rear tapered approx. 500 mm x 10° * Pneumatic locking with conical lock bolts and reinforced lock positions; supply lines protected within the extendable rails and automatically adjust to the platform length * BPW axles and suspension, 1st axle steered ahead, 2nd axle fixed, all other axles hydraulic-mechanical forced steering * 1st axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with raise/lower valve * Tires: 235/75 R 17.5 3PMSF twin tires * Mechanical landing gear with two-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Platform with continuous and between the axles interrupted approx. 50 mm thick hardwood flooring (increases friction coefficient) * Long holes for attachable and repositionable bridging elements: – at the fixed section behind the gooseneck – at the front of the platform * 1 sliding intermediate platform, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate floor, front and rear with long holes for attachable and movable bridging elements * 1 pair of recessed flat lashing rings in the fixed front platform section (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the platform, folding outward (LC 10,000 daN) * 1 pair of mechanical rear supports * Steering from front and rear operated via cable remote control, with single-track alignment of the axles, without installation in the tractor * 1st axle with automatic lift-axle function and starting aid in accordance with EU regulation 2021/535 * Under the gooseneck and at the rear cross-member, left and right, each with a 7-pin socket and holder for warning plates * Painted sand coating on the outer frame of the platform as well as on the checker plates and the transition area between the platf

Stav: použitý, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 09/2017, * Nápravy SAF * Výklenky na kolesá * Hydraulické nájazdové rampy s nastaviteľnou šírkou * Vzduchové odpruženie * Rozšíriteľný Iedpfx Aewta Aljafsaw * Pohotovostná hmotnosť: 11 020 kg -----Interné číslo vozidla: 11010---- Zmena a medzipredaj vyhradené. WhatsApp podpora k dispozícii! V prípade otázok k vozidlu alebo pre ďalšie informácie nás neváhajte kontaktovať cez WhatsApp. Whatsapp: nemecky, anglicky -- Whatsapp: nemecky, anglicky, arabsky

Stav: použitý, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 04/2000, ďalšia kontrola (TÜV): 10/2026, Rok výroby: 2000, Bez ťažného vozidla MAN Iodpjyhrqcjfx Aafjaw

Stav: nový, pohotovostná hmotnosť: 9 500 kg, maximálna hmotnosť nákladu: 20 000 kg, celková hmotnosť: 29 500 kg, konfigurácia náprav: 2 nápravy, zavesenie: vzduch, veľkosť pneumatiky: 245 75 R 17,5, Výbava: ABS, žeriav, KALEPAR KLP 228V6M2 – Nový 6-miestny autotransportný náves Certifikovaný podľa VDI 2700 8.1 Spĺňa staticky viac ako skutočné požiadavky v súlade s EN 12642 Code XL príloha B a VDI 2700 8.1 a je dynamicky testovaný pre osobné automobily. ● Povrchová úprava: na želanie zákazníka žiarovo zinkovaná + RAL bočný náter ● Brzdový systém: 2S-2M Wabco EBS-E ● Závesný systém: pneumatické odpruženie ● Elektrická inštalácia: 24 V Aspoeck ● Pneumatiky: 8+1 kusov, 245/70 R17.5 ● Nápravy: 9-tonová náprava SAF alebo BPW ● Hmotnosť brány: od 9000 kg do 9500 kg Iasdpevr Iunjfx Aafjw ● Celková hmotnosť vozidla: 29 500 kg (11 500 kg king pin + 18 000 kg nápravy) ● Dĺžka 5. kolíka: cca 950 mm ● Šírka návesu: 2550 mm ● Dĺžka návesu: 13 600 mm ● Hydraulicky výsuvná zadná časť o 1500 mm ● Celková dĺžka návesu: 16 500 mm ● 1 rok záruka ● Certifikát VDI 2700 8.1 ● Hydraulický navijak s 5 t ťažnou silou a diaľkovým ovládaním ● COC dokumenty (európska homologizácia CE) Všetky informácie sú bez záruky! Možné chyby a preklepy vyhradené! Fotografie slúžia len ako ilustračné príklady.

Stav: použitý, maximálna hmotnosť nákladu: 36 540 kg, celková hmotnosť: 48 500 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 06/2020, ďalšia kontrola (TÜV): 07/2028, Rok výroby: 2020, Výbava: ABS, Interné číslo vozidla: G400133 Ihneď k dispozícii v našom areáli v Kaufungene Viac informácií na: * Golec Nutzfahrzeuge GmbH (nemčina, angličtina, bulharčina, ruština) * Viktoria Sologubova (poľština, ruština, ukrajinčina, angličtina) Nízko-nakladací príves LANGENDORF SATÜ 30 – 10,0 m s kolískami na kolesá Rok výroby: 2020 Diaľkové ovládanie 3 nápravy – 2 riadené, 1 zdvíhacia Dĺžka: 13 900 mm Nakladacia plocha: 10 000 mm Technická prípustná celková hmotnosť: 48 500 kg Pohotovostná hmotnosť: 11 960 kg Príklad financovania: * Interné číslo: G400133 * Kúpna cena: 59 900,00 € * Akontácia: 10 % * Doba splácania: 60 mesiacov * Mesačná splátka: 925,02 € * Zostatková hodnota: 11 380,00 € Ak vás ponuka zaujala alebo ju chcete upraviť podľa vašich potrieb, kontaktujte nás (p. Enchev). Tešíme sa na váš telefonát. Zmeny a omyly vyhradené. Radi vykúpime vaše použité vozidlo na protiúčet. Financovanie priamo u nás v spoločnosti možné. GOLEC NUTZFAHRZEUGE GMBH Iaedpfx Ajy A Uxasafjw Hovoríme: nemecky, anglicky, španielsky, poľsky, ukrajinsky, rusky, bulharsky.

Stav: nový, maximálna hmotnosť nákladu: 25 645 kg, celková hmotnosť: 38 000 kg, konfigurácia náprav: 2 nápravy, celková šírka: 2 540 mm, Výbava: ABS, Náš kompletný sklad vozidiel s okamžite a krátkodobo dostupnými vozidlami nájdete na našej webstránke. Iajdpfx Asxf Sileafjw Výpis z výbavy. Kompletná výbava na vyžiadanie. Ložná plocha: Nízkozdvižná plošina so stredovým nosníkom, výsuvné prevedenie, dĺžka cca 6 750 mm * 5 párov sklopných úchytných krúžkov von (LC 5 000 daN) * 1 pár sklopných úchytných krúžkov von (LC 10 000 daN) * 1 pár ležatých úchytných krúžkov vzadu na ložnej ploche (LC 10 000 daN) Labutí krk: * Hydraulicky zdvíhateľný / spustiteľný a odpojiteľný labutí krk Podvozok vzadu: * Zadný podvozok, krátka verzia s uzavretým vonkajším rámom a krytom z ryhovaného plechu * Podvozok s výrezom pre rýpadlo, ktorý je vzadu uzavretý na uloženie vzduchových nádrží * 2 páry sklopných úchytných krúžkov von (LC 5 000 daN) * 1 pár sklopných úchytných krúžkov von (LC 10 000 daN) * 1 pár ležatých úchytných krúžkov vzadu na podvozku (LC 10 000 daN) Nápravy: * BPW nápravy, hydro-mechanicky nútene riadené * Vzduchové pruženie s ventilom na zdvíhanie a spúšťanie Pneumatiky: * Pneumatiky 245/70 R 17.5 3PMSF * TPMS: systém kontroly tlaku v pneumatikách podľa ECE R 141 Brzdová sústava: * Brzdová sústava Wabco podľa predpisov EÚ s EBS-E (2S2M) Lakovanie: Kvalitný 2-komponentový (2K) vrchný náter v jednofarebnom prevedení RAL 3000 ohnivo červená Vrátane nasledujúcej doplnkovej výbavy: * 2 kráľovské čapy * Pozinkovaná čelná stena, cca 400 mm vysoká * Doťahovanie zpredu a zozadu pomocou káblového diaľkového ovládania cez tlačidlá, s kontrolou vedenia náprav (bez inštalácie v ťažnom vozidle) * Elektrohydraulická jednotka * Manometer zaťaženia pre určenie zaťaženia nápravy vrátane diagramu zaťaženia * Na labutiom krku hliníkové bočné steny a zadná stena, nasúvacie, cca 2 440 x 400 mm (d x v). Zadné pozinkované zasúvacie stĺpiky sú odnímateľné. (Dĺžka nadstavby cca 2 560 mm) * Na labutiom krku samostatný vzduchový prípoj so vzduchovou pištoľou * 2 pracovné svetlá s prepínačom na náves, umiestnené na plošine labutieho krku vľavo a vpravo * INOX náradový box cca 1 350 x 400 x 400 mm na labutiom krku * 6 párov vreciek na stĺpiky pre zasúvacie stĺpiky cca 100 x 50 mm vo vonkajšom ráme ložnej plochy, 2 páry vo vonkajšom ráme podvozku * Pozinkované rozšírenia, vysúvateľné o cca 230 mm na každú stranu * Hydraulické prípojky z labutieho krku do nízkozdvižnej plošiny s multikonektorom namiesto skrutkových spojok. Bez záruky tesnosti * Centrálne maznanie s 2 čerpadlami BEKAMAX (Pico) s bežným tukom NLGI-2 a odnímateľnou ochranou okolo čerpadla * 2 páry vreciek WADER na kontejnery v ložnej ploche, na 1x20' kontajner * Odnímateľný pozinkovaný medzistôl s 1 párom WADER vreciek na kontejnery * 1 pár oceľových rámp na premostenie závesných hákov nízkozdvižnej plošiny * Na ložnej ploche je nanesená piesková vrstva proti pošmyknutiu * HRM metalizácia (High Resistance Metallisation)

Stav: použitý, maximálna hmotnosť nákladu: 34 500 kg, celková hmotnosť: 50 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 05/2025, ďalšia kontrola (TÜV): 05/2026, dĺžka ložného priestoru: 12 200 mm, šírka ložného priestoru: 2 550 mm, výška ložného priestoru: 300 mm, celková šírka: 2 550 mm, celková výška: 320 mm, Rok výroby: 2025, Výbava: ABS, 2-axle low-loader/low-bed trailer in full specification First registration: 05/2025, new vehicle Overall length: 13,065 to 17,565 mm (single-stage telescopic, extendable by 4,500 mm in 500 mm increments) Fifth wheel height: 1,200 mm Standard low-bed length: 6,650 mm Extended low-bed length: 11,150 mm Gooseneck length: 3,650 mm Rear axle bogie length: 2,765 mm Loading height on rear bogie: only 845 mm LOW-BED LOADING HEIGHT: only approx. 300 mm (loaded) Gross technical weight: 50,000 kg Technical fifth wheel load: up to 26,000 kg Technical axle load: 24,000 kg Unladen weight: 15,500 kg Chassis: 3-layer paintwork Detachable gooseneck with external main frame Iodpfx Ajw A Ekmjafeaw Central lubrication system for the front carriage plus one for the rear carriage All axles hydraulically steered GIGANT axles with drum brakes WABCO trailer EBS with roll stability support (RSS) WABCO Smartboard PENDLE AXLES with hydraulic suspension, 600 mm travel WIRELESS REMOTE CONTROL Tyres: 9x 245/70 R 17.5 Continental Electric hydraulics, 24-volt Oversize package 10 pairs of foldable deck wideners, each 225 mm 3 pairs of CONTAINER locking adapters, to accommodate either a 40 FT or a 20 FT container Drop sides on saddle platform Ramps for the low-bed platform 5 pairs of swivelling lash points in the low-bed, lashing capacity 10,000 daN 4 pairs of stake pockets in the outer frame 3 pairs of swivelling lashing rings on the rear bogie 1 pair of lashing rings on the rear underrun guard, LC 6,000 daN RENTING is the new BUYING – available immediately for hire or full-service leasing with us.

Stav: nový, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 500 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 2 500 mm, objem nakladacieho priestoru: 87 m³, Chassis Manufactured in self-supporting aluminum construction with corresponding reinforcements in the lower chord for particularly high stability and strength. Auxiliary chassis made of ALUMINUM, 140 mm frame height (max. 39 tons), axles and suspension "disc brake 22.5", Jost axle units 3 x 9 tons with DC air suspension, lifting and lowering function, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the tractor unit (without tractor unit equipment), 1st and 3rd axle separately liftable with starting aid (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension. Tires and Wheels 6 wheels with tires size 385/65 R 22.5 as per manufacturer selection on Alcoa aluminum rims, satin finish, 11.75x22.5 ET 120 (with steel bolts + approx. 120 kg) Landing Legs Aluminum drop-leg supports, manuf. Alu-Leg, 2 x 10 ton support load, for air suspension we use swivel feet. Brake System According to E.E.C. standards, two-line braking system, EBS E-unit Wabco with RSS (Roll Stability Support), spring-loaded brake system acting on two axles operated at the rear, aluminum air reservoir system, premium modulator. Electrical System Iaedpfx Aaegcw Risfew According to StVZO guidelines with 2 five-chamber tail lights type Aspöck Europoint III integrated into the aluminum end section, 24 volt system with 1x 15 pin and 2x 7 pin sockets, with LED outline marker lights on the sides, 2 work lights at the rear, 2 side-mounted LED work lights at the height of the landing legs, 1 LED work light inside at the front left operable from outside. Body/Tipper Body (Fully Welded Interior) Front wall load 17,250 dN? Rear and side walls 10,250/13,400 dN Aluminum tipper body, side walls 30 mm thick ALU plank profiles (2-3 mm) 600 mm wide fully welded with lower and upper chord, plank profiles fully welded inside, floor as moving floor system on 140 mm aluminum cross members, forklift floor load approx. 7 t/m2, cross members mounted closely (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick, straight version, special ALU corner profiles beveled, smooth rear wall straight with two ALU swing doors 50/30 mm thick with 4 lock rods in welded ALU rear frame, bearings in Teflon and stainless steel, ALU side wall running in reinforced ALU upper chord with "Kevlar tarpaulin" for complete emptying, side brush sealing and additional Kevlar side tarpaulin, integrated discharge funnel with foldable cover plate in rear left corner operable from outside, viewing window rear left, each rear door with a sampling slide (total 2), service door left side front wall. Hydraulic System "Cargo Floor" 24 board system, smooth finish Moving floor system in the base with hydraulically operated aluminum profiles on ALU square profiles with approx. 880 PE-HD gliders, approx. 8 mm floor thickness, hydraulic stroke approx. 200 mm, fixed ends at front wall, separate connection for hydraulic line under vehicle with fixed couplings, line size NW 21, fixed couplings with size and design to be specified, operating pressure 190-240 bar max., aluminum end pieces welded into floor, input rear left, cable control in lockable waterproof box, without hydraulic hoses. Accessories PVC mudguards with rubber mud flaps, ALU spare wheel holder, side ALU underrun protection in foldable design, 1 plastic toolbox approx. 800x460x430 mm, approx. 3.7 m aluminum ladder, 680 g/m2 quality rolling tarpaulin with rolling tarpaulin system incl. side quick release.

Stav: nový, pohotovostná hmotnosť: 8 490 kg, maximálna hmotnosť nákladu: 40 510 kg, celková hmotnosť: 49 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 200 mm, šírka ložného priestoru: 2 550 mm, veľkosť pneumatiky: 245/70 R 17,5, farba: sivý, prevádzková hmotnosť: 8 490 kg, Výbava: ABS, Chassis: - Robust steel frame construction with front frame offset and flat loading platform with rear taper approx. 500x100 mm - Neck height 200 mm with chamfered corners - Sloping gooseneck end approx. 500 x 100 mm (traction ribs on the outer frame in the area of the rear taper) - 2 king pin positions with interchangeable 2" king pin - Outer frame closed to the outside as a perforated outer frame for lashing with tension straps - Reinforced frame design / point load at center of gravity - Preparations for extendable width extensions in the loading area - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting roughly after 2nd axle to the end of the vehicle - 1 pair of wheel recesses in front of the axle with steel covers - (Covers with Körapur coating), depth approx. 400 mm, and 1 pair of wheel recesses between 1st and 2nd axle with steel covers - Side underrun protection = extended end plate - Drop-down supports at the rear Floor: - 35 mm larch wooden floor with aluminum omega profiles Iaedpfxowu A Sle Aafew Axles, Steering and Tires: - BPW air suspension axles, each with 10 t axle load, bellows diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - Lifting and lowering device with total lift approx. 200 mm - 2nd driving position via ball valve +50 mm - 1st axle lift axle (wired via EBS), automatic activation, with mechanical emergency operation via push button on the trailer - 3rd axle as friction-steered trailing axle with electrical and mechanical lock - 12 steel disc wheels, 10-hole, hub-centered - 12 tires 245/70 R 17.5 143/141J, tubeless - Includes tire pressure monitoring system Brake System: - Two-line brake system with EBS-E including RSS - EBS (WABCO 4S3M) - Spring-loaded parking brake - Pneumatic connections yellow/red Painting: - Steel shot blasting, spray galvanizing of chassis and priming - Painting of chassis/wheel hubs/outer frame in DB 7350 Novagrau Accessories: - Removable side and rear walls on the gooseneck, approx. 400 mm high - Spare wheel holder - Side aluminum underrun protection - 4 wheel chocks - Steel mudguards with Clear-Pass - Long license plate holder in end plate - 1 plug-in ECE plate at the rear - 11 pairs of ZK modules 10t on the side: - 2x on the gooseneck - 9x on the loading platform - Without rear towing eyes - Extending warning signs incl. 3 position lights each, front at landing gear and rear in front of end plate, infinitely extendable to a loading width of 4,500 mm - 4 holders for warning signs for plugging into stake pockets on the loading platform - 6 pairs of stake pockets at the side for plug-in stakes 100x50 mm - 2 transverse rows of stake pockets for plug-in stakes 100x50 mm on the gooseneck from outer frame inward to main frame (1x in front of and 1x behind the king pin positions) - 3 transverse rows of stake pockets for plug-in stakes 100x50 mm on the loading platform from outer frame inward to main frame (1x in the front area, 1x before 1st axle and 1x after 3rd axle) - 2 pairs of steel plates in the loading area for container locks to accommodate 1x 20ft container - Rubber skirt mounted on underrun protection - Preparation (=cable routing for NATO cable and hole pattern for later installation of NATO socket at the front of the end plate as well as bracket on the vehicle) for retrofitting an electro-hydraulic unit at the rear right for possible operation of drive-on ramps - Mechanical 24 t landing legs with single-side op