Príves s pracovnou plošinou

MÜLLER-MITTELTAL 3- Achs 30 to. Tieflader verz. hydr. Rampe NEU

Stav: nový, maximálna hmotnosť nákladu: 23 940 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 Profi 30.0 ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Parabolic springs with mechanical axle compensation at the rear ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment via drawbar spring & turnbuckle ----Lighting / Electrics: * TPMS (tire pressure monitoring system) * Multi-voltage system * LED tail lights 12 / 24 V * Removable rotating beacon at the rear * 15-pin power connector ----General Attachments: * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Closed plastic mudguards on front axle and straight, galvanized steel fender skirts on rear axle, each with splash guards * Tool box made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Flip-up lid (hot-dip galvanized) to the toolbox on the turntable platform * Four stake pockets on each side (stakes not included) with integrated lashing points ----Load Securing (La-Si Package consisting of): * 2 lashing eyes (6.4 t) at the front left & right on the main frame of the turntable platform * 6 pairs of UVV-tested lashing rings, pivotable and lowerable, loadable in all directions and recessed in the outer frame * In the corners 13.4 t, otherwise 10 t ----Widening: * 6 pairs of mechanical fold-out outriggers for a total width of 3 m (not in the rear slope area) * Widening boards stored in the center of the loading area ----Ramps: * Hot-dip galvanized, one-piece hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-way control block for retrofit of hydraulic side-shifting ramps ----Loading Area: * Over fifth wheel: approx. 1,960 x 2,520 mm & unladen height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm & unladen height approx. 910 mm (incl. 860 mm approach slope) ----Tyres: * 235/75 R 17.5 twin tires ----Unladen Weight: * Approx. 5,980 kg unladen weight ----Paintwork: * Chassis, turntable, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black tone ----Info: * Technically permissible gross weight of 30,000 kg * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: Hfodpfxsl Th Nne Afioh Immediately available ex works Egestorf

Stav: nový, Funkcionalita: plne funkčný, Rok výroby: 2025, farba: sivo-čierny, celková hmotnosť: 2 500 kg, maximálna hmotnosť nákladu: 3 000 kg, pohotovostná hmotnosť: 3 000 kg, šírka ložného priestoru: 3 000 mm, dĺžka ložného priestoru: 7 000 mm, výška ložného priestoru: 2 500 mm, číslo stroja/vozidla: Wohncontainer, Sun Container GmbH | Office Container | Residential Container | Site Container | Model FOREST | 240cm x 600cm | High-Quality and Flexible Solution Available products can be viewed at our warehouse and collected directly. Our office and residential containers provide an excellent solution for a wide range of applications. They are characterized by outstanding quality, maximum flexibility, and short delivery times. Technical Details: Dimensions: • Length: 300 cm • Width: 700 cm • Height: 250 cm • Weight: 1950 kg Insulation: • Facade cladding with wood-look slats • Ceiling/wall: 5 cm PUR (polyurethane) • Particularly robust and special base frame • 2 mm thick galvanized steel sheet • With rock wool insulation between the panes • Optional: 10 cm insulation with PUR, PIR, or rock wool available • Floor: 16 mm fiber cement board • PVC flooring Equipment: • 1x room • 1x front façade with floor-to-ceiling full-surface fixed glazing • 2x sliding windows • 1x double-leaf glass door • 1x facade cladding with wood-look slats • Premium window and glazing systems by REHAU for optimum thermal insulation and durability Colors: • RAL7016 & facade cladding with wood-look slats High-quality workmanship for long-term use Stock & Delivery: • In-stock items: Same day dispatch • Not in stock: Production time depending on model 2 to 4 weeks Hjdowycdlepfx Afiefh • Worldwide shipping: We offer professional shipping to all countries to ensure fast and reliable delivery. • Custom dimensions: Products can be manufactured to meet the customer's specific requirements. Showroom Address: Im Mannenberg 9a, 53557 Bad Hönningen For further information or bespoke customizations, please do not hesitate to contact us!

Stav: nový, pohotovostná hmotnosť: 9 650 kg, maximálna hmotnosť nákladu: 30 350 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 740 mm, šírka ložného priestoru: 2 550 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 r17,5 zoll, Rok výroby: 2026, Výbava: ABS, stredová otočná doska, 4-AXLE LOWBED TRAILER WITH TOP-LEVEL EQUIPMENT! => HOT-DIP GALVANIZED (CHASSIS FRAME, TURNTABLE FRAME, ACCESS RAMPS) => FULL AIR SUSPENSION => WITH LIFTING AND LOWERING FUNCTION (REAR AXLE UNIT!) => SAF LOWBED AXLES => LASHING PACKAGE => PERFORATED OUTER FRAME FOR ADDITIONAL LASHING POINTS => CLEAT STRIPS ON THE REAR OF THE ACCESS SLOPE => 6 LASHING POINTS IN THE EXCAVATOR SHOVEL WELL AT THE REAR END => LONG ONE-PIECE ACCESS RAMPS => SHALLOW RAMP ANGLE Perm. Gross Weight: 40,000 kg Payload approx. 30,350 kg Chassis frame hot-dip galvanized Turntable frame hot-dip galvanized Access ramps hot-dip galvanized Air suspension SAF axle with drum brakes EBS - Electronic Braking System Tires: 235/75R17.5 – 16 ply Lowbed length approx. 7,160 mm Excavator stick recess approx. 3,000 mm x 730 mm x 180 mm at rear lowbed 4 pairs of 10 t recessed lashing rings in the lowbed 2 pairs of 10 t recessed lashing rings in the highbed 4 pairs of 3 t lashing points on lowbed outer frame 3 pairs of 6 t lashing eyes on outer frame 4 pairs of stake pockets on highbed outer frame 4 pairs of stake pockets on lowbed outer frame 3-meter widening package with fold-out extensions (no taper) 4 x warning boards with lighting Rotating beacon at the rear LARGE STEEL TOOLBOX under the loading area 2 storage compartments with hinged lids in the high platform Hydraulic ramp lifters One-piece ramps approx. 3,150 x 750 mm Softwood flooring on loading area and ramps 40,000 kg gross weight only with special permit according to §70 => Delivery freight: €2.90 plus VAT per km => All prices ex works D-86368 Gersthofen Your direct contact: Mr. Hauptmann, Tel. DOLL VEHICLE MANUFACTURING Hodpfshvxgzjx Afiofh *Subject to prior sale and changes!* *Price valid ex D-86368 Gersthofen* *Sales only to commercial customers!* *Pictures may differ and are for general guidance only => may show/contain optional accessories subject to surcharge*

Stav: ako nová (výstavný stroj), pohotovostná hmotnosť: 10 000 kg, maximálna hmotnosť nákladu: 30 000 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 4x2, dĺžka ložného priestoru: 9 220 mm, šírka ložného priestoru: 2 540 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R17,5, Rok výroby: 2025, Výbava: ABS, prípojné zariadenie, stredová otočná doska, HTD 40K-RM-BM_ Internal dimensions: approx. 9,220 mm x 2,540 mm Overall dimensions: approx. 11,300 mm x 2,540 mm x 3,850 mm Gross vehicle weight: 24,000 kg Hedpfxjiciutj Afisfh Payload: approx. 14,000 kg Tyres: 235/75R17.5 inch Loading height: approx. 900 mm Drawbar length: approx. 1,500 mm Coupling height: approx. 820-1,000 mm Ramp angle: approx. 10° Ramp length: approx. 3,150 mm Ramp width: approx. 750 mm Gross weight special version: 40,000 kg Payload special version: approx. 30,000 kg Lowbed length: approx. 6,610 mm Overall dimensions (LxWxH): 11,200 Technical gross weight: approx. 44,000 kg Technical axle load: approx. 11,000 kg 6 pairs of lashing points, 3,000 kg per lashing point Lashing points in the outer frame of the lowbed 4 pairs of lashing points, 3,000 kg per lashing point Lashing/rave pockets, 3 t, in the outer frame of the raised bed 1 pair of lashing points, 3,000 kg per lashing point Lashing/rave pockets, 3 t, in the outer frame of the lowbed Suspension: Air suspension system including lifting and lowering, acting on the rear axle assembly Braking system: Braking system in accordance with EC directives with EBS 4S/3M, multi-voltage (12-24V), spring-loaded parking brake including two external test connections for brake/modulator and airbag pressure Electrics: Lighting system in LED design with indicator function for side marker lights, multi-voltage (12-24V) Turntable: Heavy-duty welded construction with low-maintenance ball bearing slew ring Drawgear: Cranked drawbar with Ø 50 mm towing eye, low-maintenance Silent bushings, including height adjustment for the drawbar Frame: Heavy-duty welded construction made of high-strength fine-grained steel with continuous crossmembers for maximum stability. Wheel recesses at the front (length at top approx. 2,500 mm - depth approx. 410 mm) and at the rear (length at top approx. 1,470 mm - depth approx. 370 mm); without wheel recess covers. Excavator recess (length 1,650 mm, width 750 mm, depth 190 mm). Wheel cut-outs above the rear wheels with wheelbase of 2,010 mm; front corners chamfered; climbing strips on the rear loading ramp for maximum safety during loading and unloading. 4 pairs of rave pockets (90x50 mm) in the outer frame - raised bed; 1 pair of rave pockets (90x50 mm) in the outer frame - lowbed Floor: 50 mm softwood flooring (painted/impregnated) Ramps: Single-piece, hot-dip galvanized loading ramps (3,150 mm x 750 mm) with 50 mm softwood covering (painted/impregnated), laterally adjustable, directly acting vertical spring loaders for effortless operation Finishing: Chassis frame hot-dip galvanized by immersion Supports: 2 folding supports at the rear left and right at the rear of the vehicle Equipment: Folding side underrun protection, front half-round plastic mudguards, rear straight steel mudguards with antispray. 2 wheel chocks with holders; contour marking according to ECE regulation R48 Wheel recess covers front: with 3 pairs of rave pockets, without covering (covers retractable under the longitudinal beams), 975.00888 Hardwood covering for front wheel recess cover. Wheel recess covers rear: with 1 pair of rave pockets, without covering (covers retractable under the longitudinal beams), 975.00897 Hardwood covering for rear wheel recess cover. 3 pairs of 6 t lashing rings, bolted 3 m outfitting package, without slope, B = 11,200 Folding outriggers with softwood planks, 970.04199-36 LED warning package HTD, cranked Aspöck warning boards, 4 units, electrics and rotating beacon 1 pair o

Stav: použitý, číslo stroja/vozidla: GE11/142/2022, pohotovostná hmotnosť: 6 350 kg, maximálna hmotnosť nákladu: 17 650 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 08/2008, dĺžka ložného priestoru: 8 500 mm, šírka ložného priestoru: 2 500 mm, zavesenie: vzduch, Veľmi dobre zachované vozidlo od prvého majiteľa Trojosý prejazdný nízkoložný príves Nízkoložný príves s nájazdovou rampou Ťažká preprava Hedpfx Afon Aw Hkoiofh Typ T3 Komakt 30,0 Dĺžka 8500 mm Šírka 2500 mm Vzduchové odpruženie Obchodno/exportná netto cena – 15 990 € Zmeny, medzi-predaj a omyly vyhradené ===== Telefón 2 Mobil =====

Stav: použitý, maximálna hmotnosť nákladu: 10 870 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 06/2025, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2023, Výbava: ABS, KA-TA-R 14.4: ----Braking System: * Wabco ABS * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Drawbar / Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm, with 40 mm flange drawbar eye ----Electrical System / Lighting: * 15-pin power connector * Multi-chamber tail lights ----General Attachments: * Jost mechanical landing gear at front * 2 mechanical folding supports at rear * Plastic toolbox, approx. 650 x 350 x 320 mm, mounted at the front right side of the chassis * Bolt-on underrun protection * Plastic quarter mudguards * Net hooks at the central locking stanchions and 2 on the front wall ----Chassis: * Chassis made of fine-grained steel ----Tipping Platform: * Steel pallet 3-way tipper body, continuous side walls with internal pipe reinforcement, without central stanchions, foldable with board wall spring lifting device * Rear stanchions bolted * Combined steel double-wing rear doors, asymmetrically divided, can be swung and locked at 270°, not foldable, with additional pendulum frame for automatic rear wall opening when tipping, locking via galvanized rod lock at rear and central locking; deactivation function for automatic rear wall function when tipping backwards with open wing door * 4 mm sheet steel floor made of fine-grained steel * Rear guide rail for loading ramps ----Load Securing: * Each corner features 1 x 5 t lashing ring, plus 4 x 3 t lashing eyes each side recessed in the outer frame ----Ramps: * 1 pair of aluminium approach ramps, approx. 3,570 x 410 mm (load capacity 10 t / pair), suitable for rubber-tyred & tracked vehicles * Lockable storage compartment for the ramps recessed under the loading bed at the rear of the chassis ----Tyres: * Tyres: 285/70 19.5 ----Paintwork: * Chassis, drawbar, underrun protection, rear stanchion, rear folding supports hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in black tone * Board wall coating in RAL 9010 pure white * Side wall coating available in any RAL color for an additional charge ----Information: * Reinforced body with load securing certificate * Vehicle has a day registration (unused) * Subject to errors and prior sale Hfedpfsl Th Duex Afijh ----Delivery Time: Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 16 400 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * T3 Profile 30.0: * EBS-E (electronic braking system) * TPMS (tire pressure monitoring system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension with lift and lower function * SmartBoard information system on trailer with pressure sensors for axle load display per axle group * Side underrun protection * Mechanically adjustable warning panel kits front and rear * Front axle with closed plastic mudguards, rear axle with straight, galvanized steel skirts, each with spray protection * Folding cover (hot-dip galvanized) for toolbox on bogie platform * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm (black powder-coated), mounted right side Hfedpfx Afjq Dyvcsish * 15-pin power connector * LED lighting 12/24 V * Removable LED beacon at rear * Side marker lights with indicator control * Drawbar with 40 mm towing eye and height adjustment via drawbar spring and turnbuckle * Tire pressure monitoring system with display option in the truck via EBS signal (no truck-side installation required) * Rubber coating on folding ramps as well as on approach slope left and right (approx. 860 mm length) * Rubber coating on longitudinal beams from front to rear crossmember * Hardwood floor on the running surfaces of the low-loader platform * Four stake pockets per side, each with 2 t lashing option * Load securing package consisting of: 5 pairs of swiveling and retractable UVV lashing rings, loadable in all directions and recessed into the outer frame – corners rated to 13.4 t, others 10 t * Six pairs of mechanical folding outriggers for 3 m overall width (not at rear slope) * Plank holder under the loading area, longitudinal arrangement * Roller stop raised in front of the front crossmember, with 1 x 6.4 t lashing ring per side * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable tip and load-holding valves * Hydraulic side ramp shift * Hydraulic rear support (single-stage cylinder) * Hydraulic flow divider on trailer (for hydraulic pump capacity in truck over 40 l to max. 140 l/min) * Hydraulics control block, splash-proof * Dual-circuit hydraulics * Loading area over turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (including 860 mm approach slope) * Loaded platform height approx. 890 mm +/- 20 mm (air suspension) * Chassis, bogie, roller stop, folding extensions, and ramps hot-dip galvanized * Axles, turntable, drawbar, air tanks, etc. painted in black * Loaded platform height: approx. 890 mm +/- 20 mm * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf