Nízkopodlažný náves

SCHEUERLE EuroCompact FL02 2fach Tele 17 m im Bett

Stav: nový, maximálna hmotnosť nákladu: 44 000 kg, celková hmotnosť: 61 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, Ďalšie informácie tu: Pgsdpfov D Abtjx Ahvot

Stav: veľmi dobrý (použitý), konfigurácia náprav: > 3 nápravy, povolené zaťaženie nápravy (náprava 1): 11 000 kg, dovolené zaťaženie nápravy (náprava 2): 11 000 kg, povolené zaťaženie nápravy (náprava 3): 11 000 kg, dĺžka ložného priestoru: 15 500 mm, šírka ložného priestoru: 2 740 mm, výška ložného priestoru: 1 050 mm, celková dĺžka: 15 500 mm, celková šírka: 2 740 mm, zavesenie: hydraulika, veľkosť pneumatiky: 245/ 70R17.5 | load index 146/146F, farba: modrá, Rok výroby: 2003, Farba: Modrá Nosnosť: 73 500 kg Rozšíriteľný Hlavné vlastnosti Výrobca: Nooteboom Typ: MCO-85-06 V/Z – Dvojito výsuvný Číslo podvozku: XMRMC000030000456 Rok výroby: 2003 Hmotnosti/nosnosť Zaťaženie ťahačom (king-pin): 27 500 kg Zaťaženie na nápravu: 11 000 kg Celkové zaťaženie náprav: 66 000 kg Celková prípustná hmotnosť (GVW): 93 500 kg Prevádzková hmotnosť: 20 200 kg Nosnosť: 73 500 kg Nápravy Značka náprav: SAF Hydraulické odpruženie Prvá náprava pevná Nápravy 2 – 6: hydraulicky riadené Vysokotlakový/nízkotlakový ventil Brzdový systém WABCO s EBS Pneumatiky: 245 / 70 R17.5 | index nosnosti 146/146F Rozmery Dĺžka: 15 505 mm Predĺženia: +8 800 mm + 8 800 mm Maximálna dĺžka pri úplnom predĺžení: 31 105 mm Dĺžka ložnej plochy: 11 520 mm Maximálna dĺžka ložnej plochy: 29 120 mm Šírka ložnej plochy: 2 740 mm Výška: 1 050 mm Ďalšie informácie NATO zásuvka Hydraulicky ovládané ojové spojenie (gooseneck) Výsuvné podpery (outriggers) Dvojitý výsuvný rám Viazacie oká Ručné podpery (landing gear) Elektrohydraulické čerpadlo pre funkcie návesu Zadný nárazník s osvetlením King-pin 3,5” Centrálne mazanie s 2 čerpadlami = Ďalšie informácie = Pjdev E Rchepfx Ahvjgt Všeobecné informácie Rok výroby: 2003 Konfigurácia náprav Rozmer pneumatík: 245/70 R17.5 | index nosnosti 146/146F Značka náprav: SAF Odpruženie: hydraulické Zadná náprava 1: dvojmontáž; max. nosnosť: 11 000 kg Zadná náprava 2: dvojmontáž; max. nosnosť: 11 000 kg; riadená Zadná náprava 3: dvojmontáž; max. nosnosť: 11 000 kg; riadená Zadná náprava 4: dvojmontáž; max. nosnosť: 11 000 kg; riadená Zadná náprava 5: dvojmontáž; max. nosnosť: 11 000 kg; riadená Zadná náprava 6: dvojmontáž; max. nosnosť: 11 000 kg; riadená Hmotnosti Prevádzková hmotnosť: 20 200 kg Nosnosť: 73 299 kg Celková prípustná hmotnosť: 93 500 kg Funkčné vlastnosti Výška ložnej plochy: 105 cm Rozšíriteľná konštrukcia: Áno Stav Technický stav: veľmi dobrý Vizuálny stav: veľmi dobrý Finančné informácie Cena: na vyžiadanie

Stav: nový, pohotovostná hmotnosť: 6 350 kg, maximálna hmotnosť nákladu: 38 650 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 540 mm, zavesenie: vzduch, veľkosť pneumatiky: 385/65 R22,5, Výbava: ABS, Loading Area: - 2 pairs of folding lashing rings on the outside (LC 5,000 daN) - 24 pairs of cut-outs in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN) Landing Legs: - JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: - BPW axles, air-suspended, with disc brakes (430 mm), equipped with lifting/lowering function - Tyres: 385/65 R 22.5 Brake System: - WABCO brake system according to EU regulations with EBS-E (2S2M) Paintwork: - First-class and long-lasting corrosion protection of the standard shot-blasted welded frame is ensured by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) single-colour top coat in MB 7350 Nova Grey - Rear section metallised and painted in RAL 9010 (Pure White) - Metallic paint finish not possible Steel Construction: - Steel construction made of high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (Yield strength 355MPa) - S690QL/S700MC (Yield strength 690MPa) Electrical System: - Electrical system according to EU regulations - 24 Volt lighting - ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front connection rail with sockets 24N, 24S & 15-pin - Connection in accordance with ISO. - 24N ISO-1185 - 24S ISO-3731 Pgsdpfx Ahjiu Etksvst - 15-pin ISO-12098 Accessories Included: - Yellow-red air couplings mounted on the galvanised connection rail at the front - 4 wheel chocks with holders - 2" king pin - Galvanised steel front wall approx. 1,600 mm high, EN12642-XL - White reflective tape according to EU regulations on the sides and red on the rear of the semi-trailer - European reflective panels (red-yellow) on the rear of the trailer - Loading platform with approx. 30 mm thick hardwood floor set in omega profiles - 10 pairs of stake pockets for plug-in stanchions 100 x 50 mm on the outer frame of the loading area - 3 pairs of cross-rails for stake pockets for plug-in stanchions 100 x 50 mm, mounted transversely on the loading deck - Storage tray for 1,000 mm plug-in stanchions, at rear in the central beam - 1 spare wheel holder under the loading platform on the right-hand side (in direction of travel) - 1 mudflap at the rear of the trailer - Manual and documentation on USB stick - 1 bracket for a rotating beacon at the rear of the trailer - On the gooseneck and rear panel, left and right, a bracket for warning signs including socket - 6 pairs of WADER container locks on the loading platform for 1x 20ft, 2x 20ft, or 1x 40ft container, flush with rear - 80 km/h speed stickers at the rear and on both sides - Four warning boards, extendable by approx. 400 mm, approx. 423 x 423 mm, with an LED position light - Load pressure gauge for axle load determination including load diagram - HRM metallisation (High Resistance Metallisation) of the outer frame - Complete steel construction shot-blasted, followed by metallisation with ZINACOR 850 (Zinc 85% - Alu 15%) on the defined visible surfaces

Stav: veľmi dobrý (použitý), prvá registrácia: 09/2015, dĺžka ložného priestoru: 20 180 mm, šírka ložného priestoru: 3 000 mm, farba: iný, Rok výroby: 2015, Poškodenia: žiadne YAFTL2007F0017329 = Ďalšie informácie = Prevádzková hmotnosť: 13 600 kg Nosnosť: 28 400 kg Celková povolená hmotnosť: 42 000 kg Technický stav: veľmi dobrý Vizuálny stav: veľmi dobrý Cena: na vyžiadanie ŠPZ: DW205AH = Firemné informácie = V prípade akýchkoľvek otázok alebo návrhov nás neváhajte kontaktovať. Zaručujeme odpoveď do 8 hodín. Ceny sú uvedené bez DPH. Z poskytnutých informácií nemožno odvodiť žiadne práva. Kancelársky telefón: Mobil: (Holandsky - Anglicky - Nemecky - Francúzsky - Španielsky - Taliansky) Dostupné na WhatsAppe a Viberi. Mobil: (Holandsky) Dostupné na WhatsAppe a Viberi. Pri platbe bankovým prevodom je potrebné zaslať peniaze na náš bankový účet uvedený nižšie. Vždy si overte platobné údaje, ktoré sú uvedené na našej webovej stránke. Ak ste obdržali iné informácie, kontaktujte nás. Ak máte akékoľvek pochybnosti, zavolajte nám, aby sme mohli overiť faktúru a/alebo platbu. Bankové údaje: Rabobank Laan van Limburg 2 4701 BP Roosendaal IBAN: NL 89 RABO Pgjdpsymrb Sefx Ahvet EORI/DIČ/DPH: NL857401B(01) BIC/SWIFT: RABONL2U

Stav: nový, pohotovostná hmotnosť: 10 350 kg, maximálna hmotnosť nákladu: 39 150 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Výbava: ABS, Swan neck: - Swan neck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood floor, 30 mm thick Loading area: - Telescopic loading platform with rear bevel, approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm - Wheel recesses with square climbing bars 15 x 15 mm and widened sections at the bottom - Between 1st and 2nd axle: 1 pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm - 3-part removable galvanized covers over the wheel recesses (W 670 mm) – max. point load 5 t each - Recess in the rear bevel as well as into the loading area for excavator bucket stick storage, approx. 2,900 x 750 x 210/290 mm - 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN) - 5 pairs of outward-folding lashing rings (LC 5,000 daN) - 2 pairs of outward-folding lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) - Cutouts in the outer frame of the platform for attaching tie-down straps (LC 2,000 daN) One-piece ALU ramps: - One pair of one-piece ALU ramps approx. 2,500 x 600 mm - Ramp with spring lifting mechanism, manually adjustable - Maximum load per pair: 24,000 kg Axles and tires: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated automatically via reverse gear and manually - Air suspension with lift and lower valve - Axle tools - Tires 235/75 R 17.5 - TPMS tire pressure monitoring system according to ECE R 141 Accessories included: - 1 spare wheel with holder in front of the headboard - 2-inch king pin - 1 galvanized steel headboard, approx. 400 mm high - Yellow-red air couplings to the galvanized connection rail at the front - 4 wheel chocks with holders on headboard - ALU ramp storage at the rear of the swan neck - Galvanized extendable width extensions, extendable by approx. 230 mm per side - Galvanized folding supports under rear bevel of loading area - 1 beacon mounting bracket at trailer rear - White reflector tape according to EU regulations on the sides; red on extension and rear - Swan neck and rear panel each with 1 holder for warning signs incl. socket, left and right Pgodpfjiu Er Asx Ahvst - On swan neck: ALU drop-in side panels and rear panel, approx. 2,440 x 400 mm - The rear galvanized drop-in stakes are removable (superstructure length approx. 2,560 mm) - 2 pairs of WADER container pockets in platform for one 20ft or 30ft container - 3 pairs of stake pockets 100 x 50 mm in outer frame of platform - 1 removable galvanized intermediate table with 1 pair of WADER container pockets - Square climbing bars 20 x 20 mm every 200 mm on the outer frame at platform's rear bevel - Anti-slip sand finish painted onto tread plates on swan neck and loading area - Four extendable warning signs approx. 423 x 423 mm, extendable by approx. 400 mm, each with position light - Warning signs equipped with bracket for beacon - 80 km/h speed stickers on rear and both sides - Load pressure gauge for axle load determination including load chart - HRM metallization (High Resistance Metallisation) of outer frame - Complete steel structure shot-blasted, then all defined visible areas metallized with ZINACOR 850 (zinc 85% - alu 15%) via hot finishing

Stav: použitý, maximálna hmotnosť nákladu: 42 500 kg, celková hmotnosť: 60 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 06/2022, with 12 split axles, hydraulically suspended, hydromechanical forced steering, rear chamfer and drive-on ramps STZ-L Gooseneck Psdpfow Etd Tex Ahvjgt - robust steel welded construction - designed loading area 3,950 x 2,480 mm incl. chamfer - hydromechanical forced steering (dual-circuit steering) - turntable-mounted fifth wheel plate with replaceable 2 or 3.5 inch kingpin and adjustable steering wedge - kingpin load 24 t - steering radius to the rear 2,600 mm Loading area - lowered outer panels 4,630 mm, 420 mm deep enabling a loading height of 470 mm or 830 mm with floors installed - extendable by 2,053 mm - incl. aluminium bridging tracks to create a level surface - excavator arm recess at rear axles, 4,900 mm long, 880 mm wide, 480 mm deep - rear chassis length 4,900 mm incl. 500 mm chamfer, loading height 890 mm - one pair of wheel recesses in bottom loading area - hydraulically suspended 3-axle chassis - split Gigant axles with 600 mm stroke Vehicle rear - design: rear chamfer 500 mm - hydraulic rear support Drive-on ramps - 2-piece drive-on ramps, length 2,850 + 1,850 mm, width 800 mm - rubber surface with climbing strip Brake system - two-line full air brake system with diaphragm brake cylinders - automatic load-dependent braking (ALB) - automatic rod plate system (AGS) - parking brake via spring actuators - ABV brake Special equipment Radio remote control for steering and ramp operation Central lubrication system Technical Data Gooseneck Loading area (LxW): 3,950 x 2,480 mm Fifth wheel height loaded: 1,300 mm Loading area Loading area (LxW): 10,030 x 2,850 mm, extendable by 2,053 mm Lowered outer panels: 4,630 mm long plus 2,053 mm extension Central girder: 980 mm Excavator arm recess: 4,900 mm long, 880 mm wide, 480 mm deep Steering 1st – 3rd axle hydromechanically forced-steered (dual-circuit steering)

Stav: použitý, celková hmotnosť: 120 000 kg, konfigurácia náprav: > 3 nápravy, prvá registrácia: 07/1999, Goldhofer STHP-ET Gooseneck Main Features - Ball bearing turntable saddle plate, 3.5" king pin, and adjustable steering wedge - Integrated hydromechanical dual-circuit steering system for steering pendulum axles (2-circuit steering, 4 hydraulic cylinders) - Hydraulic lifting and lowering function, including support cylinders - Hydraulic differential control - Configured loading platform (approx. 3,700 x 2,440mm) with checker plate covering - Designed for a technical fifth wheel load up to 30t - Steering radius of 2,800mm for use with a 4-axle tractor unit - Laden fifth wheel height 1,350mm - Aluminium drop sides (400mm high, on all four sides) Goldhofer Heavy-duty Chassis Module Type THP/ET 3 - Loading length 4,200mm x 2,750mm - Loading height 1,250mm – chassis module combinable longitudinally and transversely - Box-type center frame with integrated air and hydraulic oil tanks Pgodpewuixfsfx Ahvet - Optimized pin-lug coupling at the front and rear for longitudinal combinations - Two single-tyre pendulum axle units with a total of 4 wheels per axle line - Axle units mounted to the chassis frame via king pin supports - Hydraulic axle compensation +/- mm, hydropneumatic gas suspension, and hose rupture safety valves on all axle units - Chassis-integrated, hydromechanical 2-circuit all-wheel force-steered axle system with a maximum axle steering angle of 60° - 2-line all-wheel air brake and spring-loaded parking brake - Hydraulic locking pins - Unladen weight approx. 8,000 kg - BPW axles Technical Data Technical axle load per axle line: at 5 km/h – 23,000kg, at 50 km/h – 14,100kg, at 80 km/h – 12,600kg Goldhofer THP-ET Vessel Bridge 75 t Payload Hydraulically widenable vessel bridge, 75,000 kg payload Base width 2,990mm, hydraulically extendable to 4,640mm Total vessel bridge length 9,900mm Internal vessel bridge length approx. 7,500mm Technically extendable by approx. 5,500mm Girder Dimensions Length 7,500mm + 5,500mm Height 500mm, bottom width 470mm, top width 320mm Goldhofer Heavy-duty Chassis Module Type THP/ET 5 - Loading length 7,000mm x 2,750mm - Loading height 1,250mm – chassis module combinable longitudinally and transversely - Box-type center frame with integrated air and hydraulic oil tanks - Optimized pin-lug coupling at the front and rear for longitudinal combinations - Two single-tyre pendulum axle units with a total of 4 wheels per axle line - Axle units mounted to the chassis frame via king pin supports - Hydraulic axle compensation +/- mm, hydropneumatic gas suspension, and hose rupture safety valves on all axle units - Chassis-integrated, hydromechanical 2-circuit all-wheel force-steered axle system with a maximum axle steering angle of 60° - 2-line all-wheel air brake and spring-loaded parking brake - Hydraulic locking pins - Unladen weight approx. 13,000 kg - BPW axles Technical Data Technical axle load per axle line: at 5 km/h – 23,000kg, at 50 km/h – 14,100kg, at 80 km/h – 12,600kg

Stav: použitý, maximálna hmotnosť nákladu: 36 540 kg, celková hmotnosť: 48 500 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 06/2020, ďalšia kontrola (TÜV): 09/2028, Rok výroby: 2020, Výbava: ABS, Interné číslo vozidla: G400133 Okamžite k dispozícii na našom parkovisku v Kaufungene. Viac informácií nájdete tu: ? Luis Lucena ? Viktoria Sologubova Nemecky Langendorf SATÜ 30-10,0 M nízkoložný náves | 3 nápravy | Žliabky na kolesá | 36 540 kg úžitková hmotnosť Na predaj je použitý nízkoložný náves Langendorf SATÜ 30-10,0 M, vyrobený v roku 2020. Náves je vybavený žliabkami na kolesá, diaľkovým ovládaním a tromi nápravami, z ktorých sú dve riadené a jedna je zdvíhateľná. Vďaka 10 000 mm dlhej ložnej ploche a technickej úžitkovej hmotnosti 36 540 kg je tento nízkoložný náves ideálny na prepravu stavebných strojov, čelných nakladačov, rýpadiel a iného ťažkého zariadenia. Technické údaje: * Výrobca/model: Langendorf SATÜ 30-10,0 M * Typ vozidla: Nízkoložný náves * Prvé prihlásenie: 06/2020 * Rok výroby: 2020 Pedpfx Ahsy A Uxasvegt * Nápravy: 3 * Dve riadené nápravy * Jedna zdvíhateľná náprava * Celková dĺžka: 13 900 mm * Dĺžka ložnej plochy: 10 000 mm * Technicky povolená celková hmotnosť: 48 500 kg * Vlastná hmotnosť: 11 960 kg * Úžitková hmotnosť: 36 540 kg * Žliabky na kolesá * Diaľkové ovládanie * Technická kontrola: Nová * Číslo vozidla: G400133 * Stav: Použité * Nemecké vozidlo Prehliadka je možná po predchádzajúcom dohodnutí termínu. Ďalšie informácie, fotografie a videá vám radi poskytneme na vyžiadanie. Chyby, zmeny a predaj vyhradené. Anglicky Langendorf SATÜ 30-10.0 M Low-Loader | 3 Axles | Wheel Recesses | 36,540 kg Payload Used Langendorf SATÜ 30-10.0 M low-loader semi-trailer, manufactured in 2020. This trailer features wheel recesses, remote control and three axles, including two steering axles and one lift axle. With a 10,000 mm loading platform and a technical payload of 36,540 kg, the low-loader is ideal for transporting construction machinery, wheel loaders, excavators and other heavy equipment. Technical details: * Make/model: Langendorf SATÜ 30-10.0 M * Vehicle type: Low-loader semi-trailer * First registration: 06/2020 * Year of manufacture: 2020 * Number of axles: 3 * Two steering axles * One lift axle * Overall length: 13,900 mm * Loading-platform length: 10,000 mm * Technically permissible gross weight: 48,500 kg * Empty weight: 11,960 kg * Payload: 36,540 kg * Wheel recesses * Remote control * Technical inspection: New * Stock number: G400133 * Condition: Used * German trailer Inspection is possible by prior appointment. Further information, photos and videos are available upon request. Errors, changes and prior sale reserved. Finančný príklad: * Interné číslo: G400133 * Predajná cena: 54 900,00 € * Záloha: 10 % * Doba splácania: 60 mesiacov * Mesačná splátka: 849,02 € * Zvyšková hodnota: 10 380,00 € Ak vás táto ponuka zaujíma alebo by ste ju chceli upraviť podľa vašich potrieb, kontaktujte nás (p. Enchev). Tešíme sa na váš telefonát. Chyby vyhradené. Radi vám prijmeme vaše staré vozidlo ako zálohu. Financovanie je možné priamo u nás. GOLEC NUTZFAHRZEUGE GMBH Hovoríme: Nemecky, Anglicky, Španielsky, Poľsky, Ukrajinsky, Rusky, Bulharsky.

Stav: nový, maximálna hmotnosť nákladu: 25 300 kg, celková hmotnosť: 38 000 kg, konfigurácia náprav: 2 nápravy, celková šírka: 2 540 mm, Výbava: ABS, You can find our complete stock of vehicles, including those available immediately or at short notice, on our website. Selection of equipment. Full equipment details available upon request. Gooseneck * Gooseneck in SNT design to optimize loading platform length * Length approx. 3,750 mm, hydraulically liftable/lowerable and detachable gooseneck * Technical fifth wheel load: 25,000 kg. Suitable for tractors: 4 x 2 and 6 x 2 Beam Deck * Lowbed designed as an extendable vessel bridge in SUPER LOW design * Length approx. 6,850 mm * With mechanical locking * Supply lines are protected within the extendable beams and automatically adjust to the respective lowbed length Rear Chassis * Short version with closed outer frame and checker plate covering * Chassis includes an excavator trough, which is closed at the rear half to accommodate the air tanks Axles * BPW axles and suspension, all axles hydro-mechanically forced steered * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve Tyres * GOODYEAR KMAX T 3PMSF (M+S) 245/70 R 17.5 twin tyres. Load index 143/141J (146/146F) Braking System * Brand: WABCO, EBS-E according to EU regulations, WITHOUT connecting cable to the tractor unit Paintwork * 6-stage final treatment * Complete steel structure shot-blasted after welding * 1 coat of zinc primer * 1 coat of adhesion primer. Final paint with 2 coats of 2-pack (acrylic) paint in a single color, followed by cavity sealing with special wax Trailer Color * RAL 3002 Carmine red * Rim color: Silver grey Pgedpfev Sw E Asx Ahvot * Side wall color: Natural aluminum Included Accessories * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit to control hydraulic operations, except for hydraulic winches. Without installation of supply connections on the tractor * Mounting adapter for 1 spare wheel in front of the gooseneck's front wall * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings. The first hole approx. 200 mm from the front, then approx. every 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring each left and right on the rear bevel of the gooseneck (LC 6,000 daN) * 2" king pin * Hydraulic crossbeam to support the gooseneck on the tractor unit or a dolly * Air connection with air gun on the gooseneck * 1 pair of steel ramps with climbing profiles and locking bolts to bridge the lowbed's hooks * 1 lashing ring each left and right on the front cross member (LC 10,000 daN) * On the outer beams of the loading platform, preparation for removable floor panels * Lashing rings with retaining spring approx. every 1,200–1,300 mm outside on the inner beams of the platform * Lashing rings with retaining spring approx. every 1,200–1,300 mm outside on the outer beams of the loading platform (LC 10,000 daN) * Cut-outs on the top flange of the outer beams above the lashing rings * Mechanical pin-tab coupling from lowbed to chassis for exchangeable loading platform or installation of extension beams. Includes electro-pneumatic-hydraulic couplings * Outer beams of the lowbed coated with non-slip sand layer * 2nd driving height for upper drive position, max. ±50 mm from normal driving position, without controls installed on the tractor * 1 pair of lashing rings with retaining spring at the transition from the lowbed to the excavator trough (LC 10,000 daN) * Bevel front and rear a

Stav: použitý, maximálna hmotnosť nákladu: 120 000 kg, konfigurácia náprav: > 3 nápravy, prvá registrácia: 10/1993, Rok výroby: 1993, Výbava: ABS, Manufacturer: GOLDHOFER Model: THP-SL Year of manufacture: 1993 / 2010 comprising: - Gooseneck with hydraulic power unit (year: 1993 - hydraulics: 2003) - 2-axle bogie module (year: 2010) - 3-axle bogie module (year: 1993) - 4-axle bogie module (year: 1993) - 5.8 m rigid excavator deck (year: 2010 - payload 100 t) Podpfjt Irxxox Ahvjgt - 8 m + 5 m extendable excavator deck (year: 1993 - payload 120 t) Available immediately. Subject to errors and prior sale.