Faymonville F-S43-1Aca Tiefbett 8,5 M Teleskopierbar Nr: 136 kúpiť použité (52 493)

Stav: nový, maximálna hmotnosť nákladu: 37 075 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, Celý náš aktuálny vozový park, vrátane vozidiel dostupných ihneď alebo v krátkom termíne, nájdete na našej webovej stránke. Výňatok z výbavy. Kompletný zoznam výbavy na vyžiadanie. Labutie hrdlo: * Labutie hrdlo so skosenými rohmi vpredu cca 45° a so zadným skosením cca 750 mm x 10° * 3 páry upevňovacích krúžkov (LC 5 000 daN) * Tvrdé drevené obloženie s hrúbkou cca 30 mm Nakladacia plocha: * Nakladacia plocha za labutím hrdlom hydraulicky zdvíhateľná a spustiteľná, dĺžka cca 2 800 mm, so zadným skosením cca 1 000 mm x 8° * 6 párov výklopných upevňovacích krúžkov smerom von (LC 5 000 daN) * 2 páry výklopných upevňovacích krúžkov smerom von (LC 10 000 daN) * 1 pár výklopných upevňovacích krúžkov smerom dovnútra na centrálnom nosníku vpredu (LC 10 000 daN) * Výrezy vo vonkajšom ráme plošiny na zavesenie upínacích pásov (LC 2 000 daN) Kdsdpfx Aieyhkrroqjk * Roštový povrch C40/4 (bodové zaťaženie cca 2,3 t na ploche cca 20 x 20 cm), nad nápravami profilovaný plech Dvojdielne oceľové rampy: * Jeden pár žiarovo zinkovaných dvojdielnych oceľových rámp, cca 2 750 + 1 400 x 800 mm, s roštovým povrchom C40/4 (bodové zaťaženie cca 2,2 t na ploche cca 20 x 20 cm) * Rampy s hydraulicky výklopnými a sklopnými časťami * Hydraulické zdvíhacie zariadenie, hydraulicky posuvné * Maximálne zaťaženie na pár: cca 40 000 kg Nápravové opory: * Mechanické nápravové opory JOST s dvojrýchlostnou prevodovkou, zdvihová kapacita cca 24 t (skúšobné zaťaženie cca 50 t) Nápravy: * BPW nápravy a odpruženie, 2 tuhé nápravy, 1 riadená vlečená náprava * Technické zaťaženie nápravy: každá 12 000 kg * Elektromagnetická blokácia spätného chodu aktivovaná spätným zaradením a manuálne * Vzduchové odpruženie s ventilom na zdvíhanie a spúšťanie Brzdový systém: * Brzdový systém WABCO v súlade s predpismi EÚ s EBS-E (2S2M) Pneumatiky: * Pneumatiky 235/75 R 17.5 3PMSF – značka podľa nášho výberu TPMS: * Systém monitorovania tlaku v pneumatikách TPMS podľa ECE R141 Lakovanie: * Metalizácia celého rámu HRM systémom ZINACOR 850 (85 % zinok/15 % hliník) pre najlepšiu ochranu proti korózii * Vrchné lakovanie – 2 vrstvy dvojzložkového laku, jednoliato v odtieni RAL 3002 karmínovo červená podľa RAL systému 841GL * Disky v striebornej šedej Príslušenstvo v cene: * 2" kráľovský čap * Galvanizovaná oceľová predná stena, výška cca 400 mm * Roštový povrch v skosení labutieho hrdla C30/3 (bodové zaťaženie cca 2 t na ploche cca 20 x 20 cm) * Roštový povrch v skosení plošiny C40/4 (bodové zaťaženie cca 3,4 t na ploche cca 20 x 20 cm) * Elektrohydraulická jednotka pod plošinou vzadu * Hliníkové bočné a zadné steny na labutiom hrdle – zasúvateľné, cca 2 440 x 400 mm (d x v); zadné pozinkované vkladacie stĺpiky odnímateľné, (dĺžka nadstavby cca 2 560 mm) * Elektrický navijak s diaľkovým ovládaním, zdvihová kapacita cca 5 400 kg, vrátane oceľového lana hrúbky cca 9,5 mm, dĺžky cca 24 m, s kladkou na navíjanie * Skrutkovaný 5 t kruh na zachytenie navijakového lana na labutom hrdle bez kladky * Galvanizovaný box na náradie integrovaný v skosenom labutom hrdle s otvorom pre navijak * Roštový povrch na labutiom hrdle C30/3 (bodové zaťaženie cca 2 t na ploche cca 20 x 20 cm) * 7 párov otvorov pre vkladacie stĺpiky cca 100 x 50 mm vo vonkajšom ráme plošiny * Predná zdvíhacia náprava s ovládaním cez TEBS E podľa aktuálneho zaťaženia nápravy a stavu naloženia * 7 párov zapustených upevňovacích krúžkov pozdĺž centrálného nosníka (LC 5 000 daN): 2 páry v zdvíhacej časti, 5 párov v zadnej časti plošiny

Stav: nový, celková hmotnosť: 55 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Rok výroby: 2025, Výbava: ABS, Our complete vehicle inventory, including immediately and shortly available vehicles, can be found on our website. Excerpt from the equipment list. Complete specification upon request. CARGO AREA: * Gooseneck, length approx. 4,300 mm, with central beam * Cargo area with double extendable design, length approx. 9,300 mm * On the central beam, a fixed support table approx. 200 mm wide is welded * Pneumatic locking with tapered locking bolts and reinforced locking positions, supply lines are protected inside the extendable beams and automatically adapt to the respective platform length (except for the first locking supply) * Technical king pin load: 25,000 kg For tractor units: 4 x 2, 6 x 2, and 6 x 4 * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, all axles hydraulically/mechanically forced-steered, mounted on turntables * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve * 275/70 R 22.5 3PMSF twin tires; brand at our discretion * ASPÖCK-UNIBOX at the front connection bar with 24N, 24S, and 15-pin sockets * 3 kW electro-hydraulic unit for hydraulic operations control. Without supply line installation at the tractor unit * 4 pairs of recessed lashing rings on the gooseneck outer frame, foldable outwards * At the king pin, 1 pair of lashing rings (LC 10,000 daN); all other lashing rings (LC 5,000 daN) * 4 pairs of stake pockets integrated into the gooseneck outer frame for plug-in stakes approx. 100 x 50 mm * 1 crosswise stake pocket rail mounted in the gooseneck floor for plug-in stakes approx. 100 x 50 mm. 1 at the rear of the gooseneck * 2" king pin * Mechanical landing legs with 2-speed gearbox and hand crank * Approx. 32 mm wooden flooring encased in ALU omega profiles on the gooseneck and cargo area * 10 pairs of recessed lashing rings lying in the cargo area outer frame, foldable outwards: - in front of the last axle and at the trailer end crossmember, one pair each of lashing rings (LC 10,000 daN) - all other lashing rings (LC 5,000 daN) * 8 pairs of stake pockets integrated into the cargo area outer frame for plug-in stakes approx. 100 x 50 mm * 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the cargo area on the left in direction of travel * Steering from front and rear can be controlled via cable remote, with axle alignment monitoring, without installation into the tractor unit * Steel front wall, approx. 1,800 mm high, certified according to EN12642 : 2016 XL Kedpexc Axxjfx Aiqedk * Circular NATO socket at front connection bar (Maeler & Kaege VG 96 917) * 1 LED work light each left and right at the landing legs, wired to the tractor unit connection bar * 3 crosswise stake pocket rails mounted in the cargo area floor for plug-in stakes approx. 100 x 50 mm * 1 additional removable intermediate table, approx. 500 mm wide, for the large cross-section pull-out pipe, with hardwood covering * 1 additional lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the cargo area on the right in direction of travel * 1 additional lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the cargo area on the left in direction of travel * WADER container pockets in the cargo area for transport of: 1x 20' container at load center, 2x 20' containers, 1x 40' container * 1 LED work light each left and right in front of the axles

Stav: nový, maximálna hmotnosť nákladu: 37 075 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, Celý náš vozový park okamžite a krátkodobo dostupných vozidiel nájdete na našej webovej stránke. Výber z výbavy. Kompletná špecifikácia na požiadanie. Laboltný krk (husí krk): * Laboltný krk s prednými skosenými rohmi cca 45° a zadným skosením cca 750 mm x 10° * 3 páry upevňovacích krúžkov (LC 5 000 daN). Podlaha z tvrdého dreva hrúbky cca 30 mm Nakladacia plocha: * Nakladacia plocha za laboltným krkom hydraulicky zdvíhateľná a spúšťateľná, dĺžka cca 2 800 mm, so zadným skosením cca 1 000 mm x 8° * 6 párov von vyklápateľných upevňovacích krúžkov (LC 5 000 daN) * 2 páry von vyklápateľných upevňovacích krúžkov (LC 10 000 daN) * 1 pár dovnútra vyklápateľných upevňovacích krúžkov v centrálnom nosníku vpredu (LC 10 000 daN) * Výrezy vo vonkajšom ráme nakladacej plochy na zavesenie upínacích pásov (LC 2 000 daN) * Podlaha z roštovej mreže C40/4 (bodové zaťaženie cca 2,3 t na ploche cca 20 x 20 cm), nad nápravami podlaha z rifľovaného plechu Dvojdielne oceľové rampy: * Jeden pár žiarovo pozinkovaných dvojdielnych oceľových rámp, cca 2 750 + 1 400 x 800 mm, s roštovou podlahou C40/4 (bodové zaťaženie cca 2,2 t na ploche cca 20 x 20 cm) Kjdpeyhkqzjfx Aiqedk * Rampa s hydraulicky vyklápateľnými časťami. Hydraulické zdvíhanie, hydraulicky pojazdná * Maximálne zaťaženie na pár: cca 40 000 kg Oporné nohy: * JOST mechanické oporné nohy s dvojrýchlostnou prevodovkou pre cca 24 t zdvíhacej kapacity (cca 50 t testovacej záťaže) Nápravy: * BPW nápravy a zavesenie, 2 nápravy pevné, 1 náprava vlečená * Technické zaťaženie nápravy: po 12 000 kg * Elektromagnetické spätné blokovanie cez spiatočku a manuálne ovládanie * Vzduchové odpruženie so zdvíhacím/spúšťacím ventilom Brzdový systém: * WABCO brzdový systém podľa predpisov EÚ s EBS-E (2S2M) Obutie: Pneumatiky 235/75 R 17.5 3PMSF – značka podľa vlastného výberu TPMS: * Systém kontroly tlaku pneumatík podľa normy ECE R 141 Lakovanie: * HRM žiarové metalizovanie celého podvozku vozidla ZINACOR 850 (85% zinok/15% hliník) pre najvyššiu úroveň ochrany proti korózii * Vrchný lak v 2 vrstvách dvojzložkového laku, jednoliata farba RAL 3002 karmínovo červená podľa systému RAL 841GL * Disky v striebornej sivej Príslušenstvo v cene: * 2“ kráľovský čap * Jedna pozinkovaná oceľová predná stena, cca 400 mm vysoká * Roštová podlaha v skosení laboltného krku C30/3 (bodové zaťaženie cca 2 t na ploche cca 20 x 20 cm) * Roštová podlaha v skosení nakladacej plochy C40/4 (bodové zaťaženie cca 3,4 t na ploche cca 20 x 20 cm) * Na rifľovanom plechu, nad kráľovským čapom a nakladacou plochou je nanesená vrstva piesku ako ochrana proti pošmyknutiu * Elektrohydraulická jednotka pod nakladacou plochou vzadu * Na laboltnom krku demontovateľné hliníkové bočné a zadné steny, cca 2 440 x 400 mm (D x V). Zadné pozinkované nasúvacie kolíky sú odnímateľné. (Dĺžka nadstavby cca 2 560 mm) * Jedno elektrické lanové navijaky s diaľkovým ovládaním, cca 5 400 kg ťažné sily, vrátane cca 9,5 mm hrubého oceľového lana, cca 24 m dlhého, s vodiacou kladkou * Prišroubovaný cca 5 t kruh pre vedenie lana navijaka na krku bez kladky * Jeden galvanizovaný box na náradie, integrovaný do skoseného laboltného krku s otvorom na navijak * Roštová podlaha na laboltnom krku C30/3 (bodové zaťaženie cca 2 t na ploche cca 20 x 20 cm) * 7 párov vreciek na nasúvacie kolíky cca 100 x 50 mm vo vonkajšom ráme nakladacej plochy * Zdvihacia náprava na prednej náprave, riadená systémom TEBS E v závislosti od aktuálneho zaťaženia nápravy a nakladacieho stavu * 7 párov upevňovacích...

Stav: nový, maximálna hmotnosť nákladu: 36 400 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment. Full specification available on request. Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long, with rear taper approx. 1,000 mm x 6° Kdjdeyhkquopfx Aiqek * For tractor units: 4 x 2 and 6 x 2 * ASPÖCK-UNIBOX at the front junction box with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic unit for controlling hydraulic functions, except for hydraulic winches. Without installation of supply connections on the tractor unit * Gooseneck outer beams with mounting holes for screw-in lashing rings. The first hole approx. 200 mm from the front, then approx. every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) * One mounting hole at the top rear of the gooseneck’s outer beams for a screw-in lashing ring * 1 pair of screw-in lashing rings included (LC 10,000 daN) * 3 pairs of recessed lashing rings inside the gooseneck outer beam (LC 5,000 daN) * 3 pairs of recessed lashing rings in the middle of the gooseneck (LC 5,000 daN) * 1 pair of recessed lashing rings at the rear center of the gooseneck (LC 5,000 daN) * Grating surface with 5 mm steel plate reinforcement on the gooseneck and rear taper * 2'' kingpin * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * Spiral cable (approx. 35 mm², approx. 3.5 m) to supply the electro-hydraulic unit and/or electric winch between trailer and tractor unit with plug (NATO-NATO) * 1 pair of removable ALU sideboards on the gooseneck, approx. 400 mm high, anodized finish LOADING PLATFORM: * Loading platform, approx. 9,600 mm long, with rear taper approx. 900 mm x 6° * Section after gooseneck hydraulically liftable and lowerable, approx. 3,000 mm, load capacity up to approx. 9,000 kg * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle rear steering. 3rd axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: each 12,000 kg * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires, brand of our choice, load index 143/141J (144/144F) * Mechanical landing gear with 2-speed gearbox and crank * Continuous grating surface with approx. 5 mm steel plate reinforcement for extra strength, designed for point loads: on the lift bed and on the loading platform * Painted sand coating on the cover plates of the gooseneck as well as transition areas between neck and lift bed, lift bed and loading platform, as well as between loading platform and ramps * 1 mounting adapter for spare wheel under the loading platform on the right in front of axles * Cut-outs in the outer frame of the loading platform and lift bed for hanging tie-down straps (LC 2,000 daN) * 11 pairs of recessed fold-out lashing rings in the outer frame of the loading platform (LC 10,000 daN): - 3 pairs in the outer frame of the lift bed - 8 pairs in the outer frame of the loading platform * 11 pairs of recessed lashing rings along the central beam (LC 5,000 daN): - 3 pairs in the lift bed - 8 pairs in the rear section of the loading platform * Control valves for the hydraulic ramps on the right side of the vehicle * 1 pair of foldable mechanical rear supports, single-hand operation HYDRAULIC LOADING RAMPS: * 1 pair of two-piece AXS steel ramps with length approx. 4,920 mm and a

Stav: nový, pohotovostná hmotnosť: 9 450 kg, maximálna hmotnosť nákladu: 35 550 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 500 mm, šírka ložného priestoru: 1 560 mm, celková šírka: 2 550 mm, veľkosť pneumatiky: 385/65 R 22,5, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck designed as load platform with aluminium chequer plate covering - Front edge bevelled at approximately 45° - Hydraulic lifting rocker, approx. -280/+250 mm lift and lower range - Two king pin positions at centres 2,300 mm and 2,000 mm - Suitable for tractor units: 4x2, 6x2 or 6x4 Loading bay: - Loading bay, approx. 9,500 mm length, equipped with bottom-mounted angle profiles for pallet loading (distance king pin to centre of axle assembly approx. 8,000 mm) Axles, suspension and tyres: - BPW axle stubs with drum brakes and independent wheel suspension, hydraulic axle balancing with lifting and lowering function - Lowering safety devices on the axles in case of air spring rupture, designed for maximum pallet height of 150 mm - Tyres: 385/65 R 22.5 - TPMS tyre pressure monitoring sensors fitted in all wheels including spares - TPMS system compliant with ECE R 141 Surface treatment: - Complete steel construction wheelabrated after welding - Second abrasive blasting with corundum for optimum coating adhesion - Full chassis HRM metallised with ZINACOR 850 (85% zinc/15% aluminium) to ensure premium corrosion protection - Final paint finish with two coats of two-component topcoat, solid colour in Nova Grey (DB 7350) - Paint structure tested by salt spray test in accordance with ISO 9227-NSS, cavity sealing with special wax Standard accessories included: - Plug-in steel headboard, approx. 400 mm high - Toolbox with lid, countersunk at rear of gooseneck, approx. 640 x 700 x 215 mm - Removable ALU rear panel on gooseneck, approx. 400 mm high, anodised - One pair of foldable ALU sideboards on gooseneck, approx. 400 mm high, anodised - 2" king pin - 3 pairs of recessed lashing rings on gooseneck (LC 6,300 daN) - Front connection panel fitted with yellow-red air couplings, illumination for operating gooseneck, suspension and hydraulic tensioning with on/off switch - Mechanical drop-leg supports for approx. 48,000 kg support load - Access ladder mounted at front right with 2 removable handrails - WABCO Roll Stability Support (RSS) - 9 pairs of lashing rings on main beams (LC 6,300 daN) - Main beams with flush-fit grating deck between load securing guide rails - Hydraulic pre-installation including control unit for mounting 3 pairs of our hydraulic load securing devices - First and last axles liftable manually left and right - Storage box behind axle assembly, left and right, splashproof - Rear bevel for easier pallet insertion - Rear crossmember fitted with eyes for mechanical load restraining - 7-pin socket at rear crossmember - Electro-hydraulic power unit - 4 wheel chocks with holders - 2 axle load gauges fitted on left, including axle load diagram - 3 pairs of hydraulic load securing arms, pivoting and adjustable on main beams - Rear door with diagonal bracing, hinged left, hydraulically locked right, can be locked horizontally at 90°, 105° and 270° - Folding underrun protection for transport of max. 4 empty standard pallets - 1 spare wheel Kdjdpoygvc Hofx Aiqjk - Number plate bracket with illumination, rear left on trailer - Round NATO socket at front connection panel (Maeler & Kaege VG 96 917) - Central lubrication system with 1 pump, BEKAMAX make, standard grease version

Stav: nový, pohotovostná hmotnosť: 6 350 kg, maximálna hmotnosť nákladu: 38 650 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 540 mm, zavesenie: vzduch, veľkosť pneumatiky: 385/65 R22,5, Výbava: ABS, Loading Area: - 2 pairs of folding lashing rings on the outside (LC 5,000 daN) - 24 pairs of cut-outs in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN) Landing Legs: - JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: - BPW axles, air-suspended, with disc brakes (430 mm), equipped with lifting/lowering function - Tyres: 385/65 R 22.5 Brake System: - WABCO brake system according to EU regulations with EBS-E (2S2M) Paintwork: - First-class and long-lasting corrosion protection of the standard shot-blasted welded frame is ensured by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) single-colour top coat in MB 7350 Nova Grey - Rear section metallised and painted in RAL 9010 (Pure White) - Metallic paint finish not possible Steel Construction: - Steel construction made of high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (Yield strength 355MPa) - S690QL/S700MC (Yield strength 690MPa) Electrical System: - Electrical system according to EU regulations - 24 Volt lighting - ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front connection rail with sockets 24N, 24S & 15-pin - Connection in accordance with ISO. - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Kjdpfx Aioiu Etkeqjdk Accessories Included: - Yellow-red air couplings mounted on the galvanised connection rail at the front - 4 wheel chocks with holders - 2" king pin - Galvanised steel front wall approx. 1,600 mm high, EN12642-XL - White reflective tape according to EU regulations on the sides and red on the rear of the semi-trailer - European reflective panels (red-yellow) on the rear of the trailer - Loading platform with approx. 30 mm thick hardwood floor set in omega profiles - 10 pairs of stake pockets for plug-in stanchions 100 x 50 mm on the outer frame of the loading area - 3 pairs of cross-rails for stake pockets for plug-in stanchions 100 x 50 mm, mounted transversely on the loading deck - Storage tray for 1,000 mm plug-in stanchions, at rear in the central beam - 1 spare wheel holder under the loading platform on the right-hand side (in direction of travel) - 1 mudflap at the rear of the trailer - Manual and documentation on USB stick - 1 bracket for a rotating beacon at the rear of the trailer - On the gooseneck and rear panel, left and right, a bracket for warning signs including socket - 6 pairs of WADER container locks on the loading platform for 1x 20ft, 2x 20ft, or 1x 40ft container, flush with rear - 80 km/h speed stickers at the rear and on both sides - Four warning boards, extendable by approx. 400 mm, approx. 423 x 423 mm, with an LED position light - Load pressure gauge for axle load determination including load diagram - HRM metallisation (High Resistance Metallisation) of the outer frame - Complete steel construction shot-blasted, followed by metallisation with ZINACOR 850 (Zinc 85% - Alu 15%) on the defined visible surfaces

Stav: nový, pohotovostná hmotnosť: 8 300 kg, maximálna hmotnosť nákladu: 36 700 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 1 080 mm, zavesenie: vzduch, veľkosť pneumatiky: 385/65 R 22.5, farba: sivý, Výbava: ABS, zdvíhacie čelo, Loading Platform: Extending loading platform design with pneumatically operated locking mechanism. Kdjdpfxjikyh Ho Aiqek Cut-outs in the outer frame of the loading platform for securing lashing straps. Landing Legs: JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity. Axles and Tyres: BPW air suspension axles with disc brakes (430 mm), equipped with lift/lower function. Trailing steering axle with electromagnetically activated reverse lockout, switchable via reverse gear or manually. Axle toolbox. Tyre size 385/65 R 22.5. Brake System: WABCO braking system compliant with EU regulations, fitted with EBS-E. Paintwork: Premium and durable corrosion protection of the standard shot-blasted welded frame by means of 2-component (2K) zinc dust primer. High-quality single-tone 2-component top coat in MB 7350 Novagrau. Rear section metallised and painted in RAL 9010. Metallic paint not possible. Steel Construction: Steel structure made from high-tensile fine-grain steels. Steel Grades: S355J2+N/S355MC S690QL/S700MC Electrical System: Electrical installation according to EU regulations. Lighting: 24 Volt ASPÖCK-NORDIK. ASPÖCK-UNIBOX on the front connection strip with 24N, 24S, and 15-pin sockets. Connections in accordance with ISO standards. Accessories Included: Galvanised air coupling connectors (yellow-red) on the front connection strip. Galvanised steel front wall, approx. 1,600 mm high, EN12642-XL. 4 wheel chocks with bracket. White reflective tape according to EU regulations at the sides, extension, and red at the rear. European reflective boards at the rear of the trailer. Loading platform with approx. 30 mm thick hardwood floor, enclosed in Omega profiles. 10 pairs of stake pockets for 100 x 50 mm square stakes in the outer frame. 1 spare wheel holder below the loading platform, right side when facing the direction of travel. Manual and documentation. Bracket for rotating beacon at the rear of the trailer. On the gooseneck and on the rear apron, left and right, each with bracket for warning signs including socket. Anti-slip sand coating painted onto the central beam. 6 pairs of WADER container pockets in the loading platform for 1x 20ft container, 2x 20ft containers, or 1x 40ft container. For an extended 45ft container, an additional locking position is provided. 4 pairs of cross stake pocket rails, mounted transversely on the loading platform for 100 x 50 mm plug-in stakes. 1 galvanised bracket mounted transversely under the loading platform (2,390 x 720 x 400 mm). Access ladder mounted on the right side in the direction of travel. Lift axle on the front axle, controlled by TEBS E, depending on current axle load and loading status. Load gauge for axle load assessment, including load diagram. HRM metallisation of the outer frame: complete steel structure shot-blasted, followed by hot-finish metallisation of the defined visible surfaces with ZINACOR 850.

Stav: nový, maximálna hmotnosť nákladu: 36 020 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 540 mm, zavesenie: vzduch, veľkosť pneumatiky: 435/50 R 19.5, farba: sivý, Výbava: ABS, Loading Platform: - Loading platform with extendable design featuring pneumatically operated locking system - 2 pairs of lashing rings (LC 5,000 daN) - 1 pair of lashing rings (LC 10,000 daN) - 6 pairs of outward-folding lashing rings (LC 5,000 daN) - 2 pairs of outward-folding lashing rings (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for attaching tensioning straps Axles and Tyres: - BPW axles, air-suspended, with disc brakes (377 mm), equipped with lifting/lowering function - Self-steering axles with electromagnetic reverse lock, activated via reverse gear or manually - Axle tools - Tyres 435/50 R 19.5 Brake System: - Brake system in accordance with EU regulations with EBS-E (2S2M) Paintwork: - Premium, long-lasting corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer - High-quality single-tone 2-component (2K) topcoat in Novagrau - Rear section metallized and painted in RAL 9010 (Pure White) - Metallic paint finish not possible Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Steel Construction: - Steel construction made from high-tensile fine-grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical System: - Electrical system compliant with EU regulations, lighting 24 Volt ASPÖCK-NORDICK (ASS3) Kjdsi Dwlwopfx Aiqjdk - ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets - Connection as per ISO - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Included Accessories: - Yellow-red air couplings on the galvanized front connection bar - 2 wheel chocks with holder - 2" kingpin - A galvanized steel front wall, approx. 1,600 mm high - Yellow reflector tape in accordance with EU regulations on the sides, extension section, and rear of the trailer - European reflector plates (Red-Yellow) at the rear of the trailer - Loading platform with approx. 38 mm thick hardwood flooring - 10 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the platform - 1 spare wheel holder under the loading platform on the right-hand side in the direction of travel - Manual and description on USB stick - 1 mudflap at the rear of the trailer - 1 bracket for a beacon at the rear of the trailer - On the gooseneck and the rear plate, left and right, each with bracket for warning signs including socket - 1 INOX toolbox mounted crosswise under the platform (1,000 x 400 x 2,500mm) - 6 pairs of WADER container pockets in the platform, for 1x 20ft container, 2x 20ft containers or 1x 40ft container; an additional locking point is provided in the extension section for a 45ft container - 3 pairs of stake pocket strips, mounted transversely in the platform, for plug-in stakes 100 x 50 mm - 60 km/h speed sticker at the rear - 2 reversing spotlights mounted on the rear plate - Four warning signs extendable by approx. 400 mm (approx. 423 x 423 mm) each with a position lamp - Bracket for beacon on the warning signs - HRM metallization (High Resistance Metallization) of the outer frame - Complete steel construction shot-blasted, then all defined visible surfaces metallized and hot-finished with ZINACOR 850 (85% zinc – 15% aluminium)

Stav: nový, maximálna hmotnosť nákladu: 38 800 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5 3PMSF, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck with chamfered front corners at 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable loading platform: - Extendable loading platform with rear chamfer approx. 1,000 mm x 8° - 6 pairs of outward-folding lashing rings (LC 5,000 daN) - 3 pairs of outward-folding lashing rings (LC 10,000 daN) - 1 pair of flat-mounted lashing rings at the front of the loading area (LC 10,000 daN) - Cut-outs in the outer frame of the loading platform for securing straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, over the axles with anti-slip chequer plate Axles and tires: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lowering valve - Axle tools - 235/75 R 17.5 3PMSF Brake system: - WABCO brake system according to EU regulations with EBS-E (2S2M) Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox, 24t lifting capacity (50t test load) Included accessories: - One spare wheel with holder in front of the bulkhead - 2-inch king pin - Galvanized steel bulkhead, approx. 400 mm high - Yellow and red air couplings on the galvanized front connector strip - 4 wheel chocks with holders at the bulkhead - Mount for rotating beacon at the rear of the trailer - Receptacle at the rear of the gooseneck for ALU approach ramps - Galvanized folding supports under the chamfer of the loading platform - Cover plates for bridging the gap between ramps and platform - White reflective tape according to EU regulations on sides, extension, and red at the rear - Electro-hydraulic unit positioned at the rear, under the platform - On the gooseneck and ramps, left and right, mounts for warning signs including power socket - Control valves for the ramps installed on the right side of the trailer - One mud flap at the rear of the trailer - User manual and documentation on USB stick - ALU side walls and rear wall approx. 2,440 x 400 mm on the gooseneck - The rear, galvanized plug-in stanchions are removable (structure length approx. 2,560 mm) - Four extendable warning signs approx. 423 x 423 mm with position light, extendable by approx. 400 mm - 3 pairs of WADER container pockets in the platform suitable for a 20ft, 30ft, or 40ft container - 6 pairs of 100x50 mm stanchion pockets in the external frame of the loading platform - Galvanized side extensions, extendable by approx. 230 mm per side - 20 x 20 mm square lashing rails every 200 mm on the external frame of the platform's chamfer - Anti-slip sand coating, painted on chequer plates above the king pin and on the loading platform - Mount for rotating beacon on warning signs - European reflective boards (red-yellow) at the rear of the trailer Kdjdpfx Aisuqlmnsqok - 80 km/h speed stickers at the rear and both sides - Load manometer for axle load measurement including load diagram - HRM metallization (High Resistance Metallisation) of the external frame - Complete steel structure shot-blasted, then all defined visible surfaces hot-metal sprayed with ZINACOR 850 (zinc 85% - aluminum 15%)

Stav: nový, pohotovostná hmotnosť: 7 900 kg, maximálna hmotnosť nákladu: 41 600 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, prevádzková hmotnosť: 7 900 kg, Výbava: ABS, Gooseneck: - Gooseneck with rear taper approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Loading Platform: - Loading platform with rear taper approx. 1,000 mm x 8° - Recess in the sloped section and extending into the loading platform for the excavator bucket stick, approx. 2,900 x 750 x 210/290 mm - Cut-outs in the outer frame of the loading platform for attaching tensioning straps - Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and Tyres: Kedpfxounrape Aiqjdk - BPW axles and suspension, 2 fixed axles, 1 trailing-steer axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated by reverse gear and manually - Air suspension with lift and lower valve - TPMS tyre pressure monitoring system according to ECE R 141 - Tyres 235/75 R 17.5 Paintwork: - Complete steel structure automatically shot-blasted after welding with turbine blasting unit - Second blast treatment with corundum for optimal adhesion of the coating system - Final coating with 2 coats of 2K topcoat, single colour in RAL MB 7350 Novagrau - Rims painted silver - Rear section metallised and painted in RAL 9010 (Pure White) - Cavities sealed with special wax Electrical System: - Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX on the front connector strip with sockets: 2x 7-pin & 1x 15-pin Included Accessories: - Extensive lashing positions - 2" king pin - One galvanised steel front wall approx. 400 mm high - Yellow-red air couplings on the galvanised front connector strip - 4 wheel chocks with holder on the front wall - Mounting at the rear of the gooseneck for ALU loading ramps - Galvanised folding supports under the sloped rear section of the loading platform - A holder for a beacon at the rear of the trailer - Galvanised, extendable side extensions approx. 230 mm each side - White reflective tape on the sides and red on the rear in accordance with EU regulations - At the gooseneck and rear plate, left and right, each with a holder for warning plates including socket - On the gooseneck, plug-in ALU side and rear boards approx. 2,440 x 400 mm - The rear, galvanised stakes are removable - 2 pairs of WADER container locks in the loading platform for a 20 ft container - 6 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the loading platform - Sliding mounting rail for ALU loading ramps at the rear of the vehicle - 20 x 20 mm square climbing strips every 200 mm on the outer frame of the sloped section of the loading platform - Painted-on sand coating as anti-slip protection on the checker plates of the gooseneck and the loading platform - Four warning plates extendable by approx. 400 mm, approx. 423 x 423 mm each, with position light - Holder for beacon on the warning plates - 80 km/h speed stickers on the rear and on both sides - European reflective panels (red-yellow) at the rear of the trailer - Manual and documentation on USB stick - HRM metallisation (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then the defined visible areas are hot-finished with ZINACOR 850 metallisation (zinc 85% - aluminium 15%)

Stav: použitý, maximálna hmotnosť nákladu: 39 780 kg, celková hmotnosť: 50 960 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 01/2023, ďalšia kontrola (TÜV): 01/2027, celková šírka: 2 540 mm, Výbava: ABS, Celý náš vozový park so vozidlami dostupnými ihneď a v krátkodobom horizonte nájdete na našej webovej stránke. Výňatok z výbavy. Kompletná výbava na vyžiadanie. Husí krk: * Husí krk so skosenými rohmi vpredu cca 45° a so zadným skosením cca 750 mm x 10° * 3 páry uchytávacích krúžkov (LC 5 000 daN) * Krytina z tvrdého dreva cca 30 mm hrubá Nakladacia plocha: * Nakladacia plocha vo výsuvnom prevedení * 5 párov uchytávacích krúžkov sklápateľných smerom von (LC 5 000 daN) * 3 páry uchytávacích krúžkov sklápateľných smerom von (LC 10 000 daN) * 1 pár uchytávacích krúžkov ležato vpredu v nakladacej ploche (LC 10 000 daN) * Výrezy v vonkajšom ráme nakladacej plochy pre zavesenie upínacích pásov (LC 2 000 daN) * Krytina z tvrdého dreva cca 48 mm hrubá, nad nápravami hliníkový slzičkový plech Oporné nohy: * JOST oporné nohy (mechanické) s dvojrýchlostnou prevodovkou pre zdvih 24 t (testovacia záťaž 50 t) Kjdpfx Aox Uvlreiqsdk Pneumatiky: * Pneumatiky 205/65 R 17.5 zdvojené kolesá Nápravy: * BPW nápravy, dve pevné nápravy, dve nápravky riadené, vzduchom odpružené, s bubnovými brzdami a funkciou zdvih/zníženie * Riadené nápravy s elektromagnetickým blokovaním spätného chodu, aktivovaným spätným chodom alebo manuálne Brzdová sústava: * Brzdový systém podľa predpisov EÚ s EBS-E (4S3M) bez spojovacích vedení k ťažnému vozidlu Oceľová konštrukcia: * Oceľová konštrukcia z vysokopevnostných jemnozrnných ocelí * Triedy ocele: S355J2+N/S355MC (medza klzu 355 MPa), S690QL/S700MC (medza klzu 690 MPa) Lak: * Prvotriedna a dlhotrvajúca antikorózna ochrana štandardne tryskaného zváraného rámu zabezpečená dvojzložkovou (2K) základnou farbou s obsahom zinku * Kvalitný dvojzložkový (2K) vrchný lak v jednom farebnom odtieni v RAL 3002 karminovo červená * Zadná časť metalizovaná a nalakovaná v RAL 9010 (čisto biela) * Disky kolies v striebornej Elektrická sústava: * Elektrická výbava podľa predpisov EÚ Osvetlenie: * 24 voltov ASPÖCK-NORDIK (ASS3), ASPÖCK-UNIBOX na pripájacej lište vpredu so zásuvkami 24N, 24S & 15-pólová zásuvka podľa ISO. 24N ISO-1185 24S ISO-3731 15-pól ISO-12098 Zahrnuté príslušenstvo: * 2-palcový kráľovský čap * Pozinkovaná oceľová predná stena cca 400 mm vysoká * Držiak rezervného kolesa pred prednou stenou * Na pozinkovanej pripájacej lište vpredu žlto-červené vzduchové spojky * 4 kusy klinov s držiakom na prednej stene * Zásuvka v zadnej časti husieho krku pre hliníkové nájazdové rampy * Pozinkované sklopné podpery pod skosením nakladacej plochy * Držiak pre výstražný maják na zadnej časti návesu * Žltá reflexná páska podľa predpisov EÚ po bokoch, na výsuvu a vzadu na návesu * Na husom krku a zadnej časti vľavo a vpravo držiak na výstražné tabule so zásuvkou * Blatník na zadnej časti návesu * Návod na obsluhu a popis na USB kľúči * Európske reflexné štítky (červeno-žlté) na zadnej časti návesu * Nálepky s maximálnou rýchlosťou 80 km/h vzadu a na oboch stranách * Akustický výstražný signál pri cúvaní * Meradlo zaťaženia na stanovenie zaťaženia náprav vrátane diagramu zaťaženia

Stav: nový, pohotovostná hmotnosť: 12 300 kg, maximálna hmotnosť nákladu: 37 200 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R17.5, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 30 mm thick hardwood flooring Two-part steel ramps: - One pair of galvanized two-part steel ramps, approx. 3,185 x 1,420 x 1,250 mm, with grating surface - Ramps with hydraulically folding ramp sections, hydraulic lifting mechanism Kdedpfx Astvfkfoiqsk Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings - 30 mm thick hardwood flooring Two-part steel ramps: - One pair of galvanized two-part steel ramps, approx. 3,185 x 1,420 x 1,250 mm, with grating surface - Ramps with hydraulically folding ramp sections, hydraulic lifting mechanism - Maximum load per pair: 30,000 kg Loading platform: - Loading area with rear chamfer approx. 1,000 mm x 8° - Approx. 48 mm thick hardwood flooring, patterned steel plate covering above the axles Axles and tires: - BPW axles and suspension, two fixed axles, one self-steering axle - Air suspension with lifting and lowering valve - The self-steering axles can be locked via electromagnetic reverse gear interlock or manually - 235/75 R17.5 3PMSF tires Accessories included: - 1 spare wheel with holder - TPMS tire pressure monitoring system according to ECE R 141 - 2" king pin - One galvanized steel headboard - Yellow-red air couplings on the galvanized front connection bar - 4 wheel chocks with holders on the front wall - Mounts at the rear end of the gooseneck for ALU loading ramps - 3-height ALU boards - Galvanized folding supports under the chamfered loading area - Height-adjustable tarpaulin body (3,960 mm) - Galvanized headboard with a tensioning mechanism for the sliding curtain - Height adjustable by approx. 400 mm - "EDSCHA" brand roof movable forwards on ALU roof beam profiles, bolted to front and rear walls - 3 pairs of movable stakes in the loading area - The superstructure is hydraulically extendable to the left and right at the rear by approx. 750 mm - Sliding roof with upward-swinging portal beam - Sliding tarpaulin with a 700 mm surplus in length, tensioning straps spaced approx. 600 mm - Height of the top edge of the superstructure approx. 3,960 mm - Operation with roof open is not permitted and will damage the tarpaulin - Cover plates for bridging the gap between ramps and loading platform - Electro-hydraulic power pack at rear, under the loading platform - Holders for warning signs including socket outlets at the gooseneck and at the ramps, left and right - Ramp control valves mounted on the trailer's right side - 6 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading platform - Lifting axle on the front axle - Grating surface in the sloped part of the loading platform C40/4 (point load 3.4 t on an area of 20 x 20 cm) - One INOX toolbox 565 x 290 x 810 mm, right side in driving direction between the axles - Painted sand layer on checker plates on the gooseneck and loading platform as slip protection - BEKAMAX (Pico) centralized lubrication system with NLGI-2 standard grease and removable pump guard - Four pull-out warning panels, approx. 423 x 423 mm, extendable by approx. 400 mm, with position lamp - Load gauge for axle load determination including load diagram - HRM metallization (High Resistance Metallisation) of the outer frame - Entire steel structure shot-peened, then specified visible surfaces hot finished with ZINACOR 850 metallization (Zinc 85% - Aluminium 15%)

Stav: použitý, konfigurácia náprav: 3 nápravy, prvá registrácia: 05/2008, * Výsuvný * Riadená náprava za jazdy * Hydraulické nakladacie rampy Kdsdpjx I Uyhofx Aiqek * Vzduchové odpruženie -----Interné číslo vozidla: 11555----Chyby a medzipredaj vyhradený WhatsApp podpora k dispozícii! V prípade otázok o vozidle alebo pre ďalšie informácie nás neváhajte kontaktovať cez WhatsApp WhatsApp Nemecky, Anglicky -- WhatsApp Nemecky, Anglicky, Arabsky

Stav: nový, maximálna hmotnosť nákladu: 37 820 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, You can find our complete vehicle inventory, including vehicles available immediately or at short notice, on our website. Excerpt from equipment. Full specification on request. Gooseneck: Gooseneck with approx. 45° chamfered front corners and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area: * 1 pair of fixed wheel recesses in front of the axles, approx. 2,610 x 970 x 400 mm (L x W x D) * Wheel recesses with square climbing strips approx. 15 x 15 mm and expansions in the lower area * Between the 1st and 2nd axle, one pair of fixed wheel recesses, approx. 1,610 x 700 x 400 mm (L x W x D) * Incl. 3-piece removable galvanized covers over the wheel recesses (approx. 670 mm wide) – max. point load approx. 5 t each * Recess in the bevel as well as protruding into the loading area for excavator bucket stick (approx. 2,900 x 750 x 210/290 mm (L x W x H) * 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) * Cut-outs in the outer frame of the loading area for attaching tensioning straps (LC 2,000 daN) One-piece steel ramps: * One pair of galvanized one-piece steel ramps, approx. 3,000 x 800 mm, with approx. 48 mm thick hardwood cover * Ramps with hydraulic lifting system, hydraulically adjustable * Maximum load per pair: 40,000 kg * In accordance with Regulation 1230/2012/EU, ramps shorter than 300 mm in driving position are not included in the vehicle length Kodpfjw Tpqwox Aiqedk Landing gear: * JOST landing legs (mechanical) with 2-speed gearbox, lifting capacity approx. 24 t (test load approx. 50 t) Axles: * BPW axles and suspension, 2 fixed axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock via reverse gear and manually activated * Air suspension with raising/lowering valve * Axle tools Tyres: * Tyres 235/75 R 17.5 3PMSF – brand at our discretion * TPMS tyre pressure monitoring system in accordance with ECE R 141. Data transfer to the truck via standardised EBS interface to ISO 11992. For correct display, the truck must be able to transmit and display this data. Braking system: * WABCO braking system in compliance with EU requirements with EBS-E (2S2M), without connecting lines to the tractor unit Steel construction: * Steel construction made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system in accordance with EU requirements * 24V ASPÖCK-NORDIK (ASS3) lighting * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets in accordance with ISO. 24N ISO-1185 24S ISO-3731 15 pin ISO-12098 Paintwork: * Complete steel structure automatically blasted with shot blasting system after welding * Second round of blasting with corundum for optimum adhesion of coating system * HRM metal coating of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection * Final coating with 2 coats of 2K topcoat, solid colour in RAL 3002 Carmine Red, according to RAL System 841GL * Wheels in silver * Rear section metal-coated and in RAL 9010 (Rest...)

Stav: nový, maximálna hmotnosť nákladu: 67 200 kg, celková hmotnosť: 85 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, You can find our complete vehicle inventory, including immediately and soon-available vehicles, on our website. Excerpt from equipment. Full specification available on request. GOOSENECK * Gooseneck in SNT design to optimize platform length, approx. 3,700 mm long, rear tapered approx. 1,000 mm x 10° * For tractors: 6x2, 6x4, and 8x4 short wheelbase * Steel front wall, removable, approx. 400 mm high * 3 kW electro-hydraulic power pack for controlling hydraulic operations, except for hydraulic winches * Outer beams of gooseneck with mounting holes for bolted lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of removable ALU side walls, approx. 400 mm high, anodized * 1 removable ALU rear wall, approx. 400 mm high, anodized * Over the gooseneck, approx. 40 mm thick hardwood floor; over the king pin, checker plate floor * 3.5-inch king pin * Guide plate from gooseneck for fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow control, incl. cabling bracket for supply lines (Faymonville couplings) * 2 pairs of stake pockets recessed into the gooseneck for approx. 100 x 50 mm plug-in stakes Kedpergzv Nsfx Aiqsdk PLATFORM * Extendable platform, approx. 11,000 mm long, rear tapered approx. 500 mm x 10° * Pneumatic locking with conical lock bolts and reinforced lock positions; supply lines protected within the extendable rails and automatically adjust to the platform length * BPW axles and suspension, 1st axle steered ahead, 2nd axle fixed, all other axles hydraulic-mechanical forced steering * 1st axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with raise/lower valve * Tires: 235/75 R 17.5 3PMSF twin tires * Mechanical landing gear with two-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Platform with continuous and between the axles interrupted approx. 50 mm thick hardwood flooring (increases friction coefficient) * Long holes for attachable and repositionable bridging elements: – at the fixed section behind the gooseneck – at the front of the platform * 1 sliding intermediate platform, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate floor, front and rear with long holes for attachable and movable bridging elements * 1 pair of recessed flat lashing rings in the fixed front platform section (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the platform, folding outward (LC 10,000 daN) * 1 pair of mechanical rear supports * Steering from front and rear operated via cable remote control, with single-track alignment of the axles, without installation in the tractor * 1st axle with automatic lift-axle function and starting aid in accordance with EU regulation 2021/535 * Under the gooseneck and at the rear cross-member, left and right, each with a 7-pin socket and holder for warning plates * Painted sand coating on the outer frame of the platform as well as on the checker plates and the transition area between the platf

Stav: nový, maximálna hmotnosť nákladu: 50 400 kg, celková hmotnosť: 65 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, Our complete stock of vehicles, including those available for immediate or short-term delivery, can be found on our website. Excerpt from the equipment. Full equipment details available upon request. GOOSENECK * Gooseneck in SNT design to optimize loading deck length, approx. 3,700 mm long, rear with chamfer approx. 1,000 mm x 10° * Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4 Kdsdpfx Aetx Nwnoiqsk * Plug-in steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection strip with sockets * 3 kW electro-hydraulic power pack for hydraulic functions, except for hydraulic winches * 1 pair of plug-in aluminum side walls, approx. 400 mm high, anodized finish * One plug-in aluminum rear wall, approx. 400 mm high, anodized finish * Approximately 40 mm thick hardwood floor covering over gooseneck, checker plate covering over king pin * 2-inch king pin * Rear part of gooseneck with mount for aluminum loading ramps * Round NATO socket on the front connection strip (Maeler & Kaege VG 96 917) LOADING PLATFORM * Extendable loading platform, approx. 8,800 mm long, with rear chamfer approx. 500 mm x 10° * Recess in the platform and into the chamfer for receiving excavator dipper stick, approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system according to ECE R 141 * BPW axles and suspension, first axle with forced steering, all other axles with hydro-mechanical forced steering * First axle with electromagnetically activated reverse lock, activated via reverse gear and manual control * Technical axle load: 12,000 kg each, air suspension with lift/lower valve * Twin tires 235/75 R 17.5 3PMSF * Mechanical landing legs with 2-speed gearbox and crank, JOST Modul B – static test load approx. 50,000 kg * Continuous hardwood floor covering approx. 50 mm thick on loading platform and interrupted between axles (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Extendable (galvanized) side extensions approx. 230 mm per side (without wooden planks) * Wheel recesses with square climbing strips, approx. 15 x 15 mm in front of axles, open to the cross member of the gooseneck, approx. 700 x 410 mm (W x D) * Aluminum covers for wheel recesses, also usable as bridging elements for the extendable platform OR as extension planks * Aluminum elements lockable onto the extendable pipes of the extensions * Extendible U-profiles for inserting the aluminum covers: – on the fixed part behind the gooseneck – at the intermediate table – on the extendable platform * Wheel recesses with square climbing strips, approx. 15 x 15 mm between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * Aluminum covers for wheel recesses, also usable as bridging elements for the extendable platform OR as extension planks * Aluminum elements lockable onto the extendable pipes of the extensions * 1 pair of mechanical rear supports * Remote steering from the front and rear via cable remote control, with single-track monitoring of axles, without installation in the tractor unit HYDRAULIC LOADING RAMPS * One pair of two-piece steel ramps, type: DR-15/60-900-4350-KG-HV-M, approx. 4,350 mm long and approx. 900 mm wide * Hydraulically foldable ramp tips * Ramps can be hydraulically shifted individually approx. 235 mm outward and approx. 215 mm inward * Super Grip rubber flooring approx. 25 mm and steel flooring approx. 5 mm as additional

Stav: nový, maximálna hmotnosť nákladu: 38 140 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, Celý náš vozový park se ihned a v krátkodobém horizontu dostupnými vozidly najdete na našich webových stránkách. Výňatek z výbavy. Kompletní výbava na vyžádání. Labutí krk: - Labutí krk se zkosenými předními rohy cca 45° a se zadním zkosením cca 750 mm x 10° - 3 páry upevňovacích ok (LC 5 000 daN) - Povrchová vrstva z tvrdého dřeva, tl. cca 30 mm Nákladová plocha: - Teleskopicky prodlužovaná ložná plocha se zadním zkosením cca 1 000 mm x 8° - Mezi 1. a 2. nápravou jeden pár pevných kolových van cca 1 610 x 970 x 400 mm (d x š x v) - Včetně třídílného odnímatelného pozinkovaného krytu nad kolovými vanami (šířka cca 670 mm - max. bodové zatížení 5 t/ks) - 1 pár zapuštěných upevňovacích ok vpředu na ložné ploše (LC 10 000 daN) - 4 páry výklopných upevňovacích ok směrem ven (LC 5 000 daN) - 3 páry výklopných upevňovacích ok směrem ven (LC 10 000 daN) - Výřezy v vnějším rámu ložné plochy pro zavěšení upínacích pásů (LC 2 000 daN) Sattelstützen: - JOST opěrné nohy (mechanické) s dvourychlostní převodovkou pro nosnost 24 t (zkušební zatížení 50 t) Pneumatiky: - Pneumatiky 235/75 R17.5 3PMSF, značka dle našeho výběru - TPMS systém monitorování tlaku v pneumatikách dle ECE R 141 - Přenos dat do tahače přes standardizované rozhraní EBS dle ISO 11992 - Pro správné zobrazování musí být tahač schopen data přijímat a zobrazovat Nápravy: - BPW nápravy a zavěšení, 2 nápravy tuhé, 3. náprava řiditelná vzadu - Technické zatížení nápravy: 12 000 kg - Elektromagnetická zpětná pojistka aktivovaná přes zpátečku i ručně - Vzduchové odpružení s ventilem pro zdvih a spouštění, nářadí k nápravám Brzdová soustava: - Brzdový systém WABCO podle předpisů EU s EBS-E (2S2M) bez propojení s tahačem Elektroinstalace: - Elektroinstalace podle předpisů EU - LED osvětlení 24 V ASPÖCK-NORDIK (ASS3) - Všechny LED boční obrysové svítilny blikají spolu s blinkrem - ASPÖCK-UNIBOX na přední přípojnici s zásuvkami 24N, 24S a 15kol. připojení dle ISO. 24N ISO-1185, 24S ISO-3731, 15pol. ISO-12098 Ocelová konstrukce: - Ocelová konstrukce z vysokopevnostních jemnozrnných ocelí - Kvalita ocelí: S355J2+N/S355MC (meze kluzu 355 MPa); S690QL/S700MC (meze kluzu 690 MPa) Lakování: - Celá ocelová konstrukce je po svaření automaticky tryskána metací turbínou - Druhé tryskání korundem pro optimální přilnavost nátěru - HRM metalizace celého rámu ZINACOR 850 (85 % zinek / 15 % hliník) pro zajištění nejlepší protikorozní ochrany - Konečný nátěr: 2 vrstvy 2K vrchního laku, jednobarevně v RAL 3002 karmínově červená, zadní část metalizovaná a v RAL 9010 (čistě bílá) - Není možný metalický lak - Lakovací systém testován v solné komoře dle ISO 9227-NSS - Dutiny utěsněny speciálním voskem Včetně následujícího příslušenství: - Na labutím krku a na zádi vlevo i vpravo vždy držák na výstražné tabule, včetně zásuvky - Držák rezervního kola před čelní stěnou (bez rezervy) - 2 palcový královský čep - Pozinkovaná čelní stěna (výška cca 400 mm) - Na pozinkované přípojnici vpředu žlutočervené vzduchové spojky - Pozinkované podpěry sklopné pod zadním zkosením ložné plochy - Nárazník z tvrdého dřeva na zadní straně labutího krku směrem k ložné ploše Kedpjw Tpq Djfx Aiqodk - 1 pár zapuštěných upevňovacích ok podél centrálního nosníku vzadu ve zkosení (LC 10 000 daN) - Na labutím krku bočnice a zadní stěna z Alu

Stav: použitý, maximálna hmotnosť nákladu: 51 870 kg, celková hmotnosť: 65 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 03/2025, ďalšia kontrola (TÜV): 03/2026, celková šírka: 2 540 mm, Výbava: ABS, You can find our entire range of vehicles, including models available immediately or on short notice, on our website. Excerpt from the equipment. Complete specification available on request. GOOSENECK • Gooseneck in SNT design for optimized load deck length, approx. 3,700 mm long, rear with chamfer approx. 1,000 mm x 10° • For tractor units: 4 x 2, 6 x 2 and 6 x 4 • Plug-in steel front wall, approx. 400 mm high • Yellow-red air couplings on the front connector rail • ASPÖCK-UNIBOX at the front connector rail with 24N, 24S & 15-pin sockets • 3 kW electro-hydraulic unit for controlling the hydraulic functions • External beams of gooseneck with mounting holes for bolted lashing rings • One mounting hole at the upper rear section of the gooseneck’s external beams for a bolted lashing ring • 1 pair of screw-in lashing rings included (LC 10,000 daN) • 1 pair of plug-in aluminium side walls, approx. 400 mm high, anodized, on the gooseneck • 1 plug-in aluminium rear wall, approx. 400 mm high, anodized, on the gooseneck • Approx. 40 mm hardwood decking on the gooseneck • 2-inch king pin • Gooseneck guide plate for the fifth wheel, approx. 500 mm wide • Mount at the rear section of the gooseneck for aluminium loading ramps • Round NATO socket at the front connector rail (Maeler & Kaege VG 96 917) LOADING DECK • Extendable loading deck, length approx. 8,800 mm, rear chamfer approx. 500 mm x 10° • Recess in the loading deck as well as in the chamfered area for accommodating an excavator dipper stick approx. 2,490 x 750 x 210/290 mm (L x W x H) • TPMS tyre pressure monitoring system according to ECE R 141 • BPW axles and suspension • 1st and 2nd axle rigid, 3rd and 4th axle self-steering • 3rd and 4th axle with electromagnetic reversing lock, can be activated via reverse gear and manually • Technical axle load rating: 12,000 kg each • Air suspension with lifting and lowering valve • 235/75 R 17.5 twin tyres, 3PMSF • Mechanical landing gear with 2-speed gearbox and crank, JOST Modul B - static test load = approx. 50,000 kg Ksdpfx Asxtc Uheiqjdk • Continuous hardwood decking (approx. 50 mm) on the loading deck and interrupted between axles (increases coefficient of friction) • Loading deck locked with tapered welded locking profiles every approx. 250 mm • Long holes for attachable and repositionable bridging elements at the front of the loading deck • Intermediate platform with stepped loading deck, approx. 300 mm wide, for extraction tube with large cross-section, with steel covering – front and rear with long holes for attachable and repositionable bridging elements – removable cover flush with the loading deck • 1 pair of lashing rings on the front crossmember (LC 10,000 daN) • 6 pairs of recessed lashing rings in the outer frame of the loading deck, foldable outward (LC 10,000 daN) • Additionally, 1 pair of lashing rings externally on the front crossmember of the loading deck, approx. 90° rotated inward towards the loading deck (LC 10,000 daN) • Extendable bolted steel extensions (galvanized), approx. 230 mm per side • 1 pair of fixed open wheel recesses up to extension, approx. 700 x 410 mm (W x D), in the loading deck ahead of the 1st axle; wheel recesses with steel covering and square climbing bars approx. 15 x 15 mm, every approx. 200 mm • Between 2nd and 3rd axles in the loading deck, 1 pair of fixed wheel recesses, approx. 1,695 x 700 x 410 mm (L x W x D); covers for wheel recesses split longitudinally, with wooden top, outer with plug-in locking...

Stav: nový, maximálna hmotnosť nákladu: 37 680 kg, celková hmotnosť: 50 960 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, You can find our complete stock of immediately and short-term available vehicles on our website. Excerpt from the equipment list. Full equipment details available upon request. Neck: * With approx. 30 mm hardwood flooring. Neck in straight design at the rear * 3 pairs of lashing rings (LC 5,000 daN) Loading Platform: * In extendable design * 5 pairs of folding-out lashing rings (LC 5,000 daN) * 3 pairs of folding-out lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) * Cut-outs in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN) * 48 mm hardwood flooring, over axles with checker plate covering Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox, load capacity approx. 24 t, test load approx. 50 t Tyres: * 205/65 R 17.5 Axles: * BPW axles and suspension * 1st axle fixed, all other axles hydro-mechanically forced-steered * Air suspension with lifting and lowering valve Brake System: * In accordance with EU regulations, with EBS-E (4S3M), without connecting lines to the tractor unit Steel Construction: * Made of high-tensile fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Painting: * Premium, durable corrosion protection of the standard shot-blasted welded frame ensured by a two-component (2K) zinc dust primer * High-quality two-component (2K) topcoat, single colour in RAL 3002 carmine red * Rims in silver Included Accessories: * 2-inch kingpin * Galvanised steel front wall, approx. 400 mm high * Yellow-red air couplings at the galvanised connection strip on the front * 4 wheel chocks with holder at the front wall * Spare wheel holder in front of the front wall * Electro-hydraulic power unit * Remote steering from front and rear using cable remote control, with single-track axle monitoring (without installation in the tractor unit) * European reflector boards (red/yellow) at the rear of the trailer * Yellow reflective tape per EU regulations on the sides, extension, and rear of the trailer * Mounting brackets for warning signs with socket on swan neck and end plate left and right * Mounting bracket for beacon at the rear of the trailer * Galvanised folding supports under the loading platform's inclined section * Load gauge for determining axle loads including load diagram * 7 pairs of WADER container locks for: 1 x 20' or 1 x 40' container on the loading platform, 1 x 40' container over the swan neck, or 2 x 20' containers * Support block with 1 pair of WADER container locks, support load approx. 20,000 kg * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the loading platform Kjdpfx Aiov Etx Eoqodk * Galvanised extensions, extendable by approx. 230 mm per side * Sliding hanging rails for aluminium loading ramps at vehicle rear * 1 pair of recessed lashing rings along the central beam, rear (LC 10,000 daN) * 2 pairs of ferry rings under the neck and 2 pairs at the rear * BEKAMAX (Pico) central lubrication system with standard lubrication grease NLGI-2 and removable cover for the pump * 2 LED reversing lights mounted at rear * Acoustic reverse warning signal * HRM Metallizing (High Resistance Metallisation)

Stav: nový, maximálna hmotnosť nákladu: 33 865 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Výbava: ABS, Celú našu ponuku vozidiel, ktoré sú okamžite alebo krátkodobo dostupné, nájdete na našej webovej stránke. Výpis z výbavy. Kompletná výbava na vyžiadanie. Labutie krk: * Labutie krk so skosenými rohmi vpredu cca 45° a so zadným skosením cca 750 mm x 10° * 3 páry kotviacich ok (LC 5 000 daN) * Povrchová podlaha z tvrdého dreva cca 30 mm hrubá Nákladová plocha: * dvojito výsuvné prevedenie so zadným skosením cca 500 mm x 8° * 6 párov výklopných kotviacich ok smerom von (LC 5 000 daN) * 4 páry výklopných kotviacich ok smerom von (LC 10 000 daN) * 1 pár položených kotviacich ok vpredu na ložnej ploche (LC 10 000 daN) * 1 medzistôl cca 250 mm * Povrchová podlaha z tvrdého dreva cca 48 mm hrubá, nad nápravami povrch s protišmykovým plechom * Výrezy v vonkajšom ráme nákladovej plochy na zavesenie upínacích popruhov (LC 2 000 daN) Nápravy: * BPW nápravy a zavesenie, všetky nápravy hydromechanicky nútene riadené * Technické zaťaženie nápravy: každá 12 000 kg * Vzduchové odpruženie s ventilom zdvíhania a spúšťania * Náradie na nápravy Pneumatiky: * Pneumatiky 245/70 R 17.5, index nosnosti (146/146 F) * Značka podľa nášho výberu Podpery: * JOST podpery (mechanické) s 2-stupňovou prevodovkou pre cca 24 t zdvíhaciu nosnosť (cca 50 t skúšobná nosnosť) Brzdový systém: * Brzdový systém v súlade s predpismi EU s EBS-E (2S2M) bez prepojovacích vedení k ťažnému vozidlu Lakovanie: Vysokokvalitná a trvácna antikorózna ochrana * Kvalitný dvojzložkový (2K) vrchný lak v jednej farbe v RAL 3002 karmínovo červená. * Zadná časť metalizovaná a lakovaná v RAL 9010 (čisto biela) Oceľová konštrukcia: Oceľová konštrukcia z vysokopevných jemnozrnných ocelí. * Oceľové kvality: S355J2+N/S355MC (medza klzu 355 MPa), S690QL/S700MC (medza klzu 690 MPa) Elektrická inštalácia: * Elektrická inštalácia podľa predpisov EU * Osvetlenie 24 V ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX na prednej prípojnici so zásuvkami 24N, 24S & 15 pin. Pripojenie podľa ISO. 24N ISO-1185, 24S ISO-3731, 15 pinový ISO-12098 Vrátane nasledujúcich doplnkov: * 2-palcový kráľovský čap * Pozinkovaná oceľová predná stena, cca 400 mm vysoká * Na pozinkovanej prípojnici vpredu žlto-červené vzduchové spojky * Držiak rezervného kolesa pred prednou stenou * Elektrohydraulická jednotka * Zákrutové riadenie spredu a zozadu ovládateľné káblovým diaľkovým ovládaním s tlačidlami, so sledovaním stopy náprav (bez inštalácie v ťažnom vozidle) * Uchytenie v zadnej časti labutieho krku pre hliníkové najazdové rampy Kodpfsw Tprzjx Aiqodk * Závesná lišta pre hliníkové najazdové rampy na zadnej časti vozidla * Pozinkované sklápacie opory pod skosením ložnej plochy * Na labutiom krku hliníkové bočnice a zadná stena, zasúvacie, cca 2 440 x 400 mm (d x v) * Zadné pozinkované zasúvacie stĺpiky sú odnímateľné (dĺžka nadstavby cca 2 560 mm) * Galvanizovaný box na náradie, integrovaný v skosenom labuťom krku * 4 páry kontajnerových vačiek WADER v ložnej ploche pre jeden 20', 2x 20', 40' alebo jeden 45' kontajner * 8 párov vačiek pre zasúvacie stĺpiky cca 100 x 50 mm v vonkajšom ráme ložnej plochy * Pozinkované výsuvné rozšírenia cca 230 mm na každú stranu * Posuvné závesné lišty pre hliníkové najazdové rampy na zadnej časti vozidla * 2 páry loďových krúžkov pod labutím krkom a 2 páry vzadu * Centrálny mazací systém s 2 čerpadlami BEKAMAX (Pico) s bežným tukom NLGI-2 a odnímateľným krytom čerpadla * 2 LED cúvacie svetlá namontované na zadnom plechu * HRM metalizácia (High Resistance Metallisation). Kompletná oceľová konštrukcia otryskaná do čista p

Stav: nový, maximálna hmotnosť nákladu: 39 720 kg, celková hmotnosť: 50 960 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, You can find our full vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt of features. Complete specifications available on request. Gooseneck * With beveled front corners approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood floor approx. 30 mm thick Loading Platform Loading platform in extendable design * 5 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of flat lashing rings at the front of the loading platform (LC 10,000 daN) * Cutouts in the outer frame of the loading platform for hooking tension belts (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering Kdjdpfxou Sd U Uo Aiqok Landing Legs * JOST (mechanical) with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Axles * BPW axles, two rigid axles and two trailing steering axles, with drum brakes * Air suspension with lifting/lowering function * Trailing steering axle with electro-magnetic reversing lock, can be activated by reverse gear or manually * Tires: 205/65 R 17.5 Brake System * Wabco braking system in accordance with EU regulations with EBS-E (4S3M), without connection lines to the tractor unit Steel Construction * Made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Painting * First-class and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer * High-quality, single-color 2-component (2K) top coat in RAL 3002 Carmine Red * Rear section metallized and finished in RAL 9010 (Pure White) * Rims in silver Standard Accessories * 2-inch king pin * Galvanized steel front wall approx. 400 mm high * Spare wheel holder in front of the front wall * At the galvanized connection rail at the front, yellow-red air couplings * 4 wheel chocks with holder at the front wall * Rear mount for aluminum loading ramps at gooseneck * Galvanized folding supports under the loading platform’s bevel * Holder for a revolving beacon at the rear of the trailer * Yellow reflector tape according to EU regulations on the sides, extension, and rear of the trailer * At the gooseneck and rear panel, left and right, each with a bracket for warning signs including socket * TPMS tire pressure monitoring system according to ECE R 141. Data transmission to the truck is via the standardized EBS interface according to ISO 11992; for correct display, the truck must be able to receive and show this data * On the gooseneck, plug-in aluminum drop sides and rear wall, approx. 2,440 x 400 mm (L x H), the rear galvanized plug-in posts are removable. (Superstructure length approx. 2,560 mm) * Galvanized toolbox, integrated in the beveled gooseneck * 6 pairs of WADER container pockets in the loading area, for 1 x 20' container, 2 x 20' containers, or 1 x 40' container * Adjustable mounting rails for aluminum loading ramps at the rear of the vehicle * 7 pairs of stake pockets for plug-in posts approx. 100 x 50 mm in the outer frame of the loading platform * One galvanized bracket transversely under the loading platform * Extendable galvanized side extensions, approx. 230 mm per side * Lift axle on front axle with control by TEBS E depending on current axle load and loading condition * 5 pairs of recessed lashing rings along the central beam (LC 5,000 daN)...

Stav: nový, maximálna hmotnosť nákladu: 52 810 kg, celková hmotnosť: 63 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, Celú aktuálnu skladovú ponuku vozidiel, ktoré sú okamžite alebo v krátkom čase k dispozícii, nájdete na našej webovej stránke. Ksdpfxexttc Ao Aiqedk Výpis zo základnej výbavy. Kompletný zoznam výbavy na požiadanie. Nakladacia plocha: * Nakladacia plocha s cca 30 mm hrubou podlahou z tvrdého dreva * 10 párov vyklápateľných kotviacich ok (LC 10 000 daN) Sedadlové podpery: * Hydraulické sedlové podpery TPMS: * Systém monitorovania tlaku v pneumatikách (TPMS) podľa ECE R 141. Prenos údajov do ťažného vozidla prebieha cez štandardizované EBS rozhranie podľa ISO 11992. Pre správne zobrazenie musí byť ťažné vozidlo schopné tieto údaje prenášať a zobrazovať. Nápravy a pruženie: * BPW nápravy, technická nosnosť na nápravu 12 000 kg, prvá náprava pevná, ostatné nápravy hydro-mechanicky nútene riadené, namontované na otočnom čape * Vzduchové odpruženie so zdvíhacím a spúšťacím ventilom * Sada náradia na nápravy Obutie: * Pneumatiky 445/65 R 22.5 169 K Elektrická inštalácia: * Elektrická inštalácia v súlade s predpismi EÚ, osvetlenie 24 V ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX na pripojovacej lište vpredu so zásuvkami 24N, 24S a 15-pin * Zapojenie podľa ISO noriem: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Brzdový systém: * Brzdový systém Wabco podľa predpisov EÚ s EBS-E (4S3M), bez prepojovacích liniek na ťažné vozidlo Oceľová konštrukcia: * Oceľová konštrukcia z vysokopevných jemnozrnných ocelí * Kvalita ocele: S355J2+N/S355MC (medza klzu 355 MPa), S690QL/S700MC (medza klzu 690 MPa) Lakovanie: * Celá oceľová konštrukcia automaticky otryskaná v turbínovom zariadení po zváraní * Druhé tryskanie korundom pre optimálnu priľnavosť náterového systému * Finálne lakovanie 2 vrstvami dvojzložkového vrchného laku, jednoliato v RAL 1007 narcísovo žltá podľa RAL systému 841GL * Zadná časť metalizovaná a nalakovaná v RAL 9010 (čisto biela) * Disky kolies striebornošedé * Systém vrstiev testovaný v koróznom (soľná hmla) teste podľa ISO 9227-NSS * Dutiny uzavreté špeciálnym voskom Vrátane príslušenstva: * Nakladacia plocha s cca 30 mm hrubou podlahou z tvrdého dreva * 2-palcový kráľovský čap * Pozinkovaná oceľová predná stena (EN12642-XL), výška cca 1 200 mm * Na pozinkovanej prednej prípojkovej lište žlto-červené vzduchové spojky * Na husím krku a zadnej časti vľavo aj vpravo vždy držiak na výstražné tabule vrátane zásuvky * Nútené riadenie náprav spredu aj zozadu cez káblové diaľkové ovládanie s ovládacími tlačidlami, s kontrolou súosovosti náprav (bez inštalácie na ťažnom vozidle) * Elektro-hydraulická jednotka * 12 párov vreciek na stĺpiky (steckrungen) cca 100 x 50 mm vo vonkajšom ráme nakladacej plochy * Tlakomer náprav na určovanie zaťaženia náprav vrátane diagramu zaťaženia * Zdvihateľná predná náprava s ovládaním cez TEBS E * 5 párov priečnych líšt na stĺpiky cca 100 x 50 mm * 1 nerezová skrinka na náradie INOX 1 200 x 460 x 550 mm vpredu pod nákladnou plochou v smere jazdy vľavo * 1 manévrovacia spojka s vystužením priskrutkovaná na koncovej priečke * Centrálne mazacie zariadenie BEKAMAX (Pico) s bežným mazivom NLGI-2 a odnímateľným krytom čerpadla * 2 LED cúvacie svetlá namontované na zadnom plechu * HRM-metalizácia celého podvozku vozidla pomocou ZINACOR 850 (85 % zinok, 15 % hliník)

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, pohotovostná hmotnosť: 11 000 kg, maximálna hmotnosť nákladu: 20 000 kg, celková hmotnosť: 31 000 kg, konfigurácia náprav: 2 nápravy, zavesenie: vzduch, Rok výroby: 2016, Nízkozdvižný náves CAMRO CN 26.20B/ Tiefbett Kodjy D Rmpepfx Aiqjdk Rok výroby 2016 Technické údaje Celková hmotnosť 31 000 kg Hmotnosť 11 000 kg Nosnosť 20 000 kg Pneumatické odpruženie Držiak na rezervné koleso 2 nápravy Veľmi dobrý stav, kompletná dokumentácia.

Stav: použitý, najazdené kilometre: 110 150 km, výkon: 188 kW (255,61 k), prvá registrácia: 02/2019, typ paliva: nafta, celková hmotnosť: 11 990 kg, konfigurácia náprav: 2 nápravy, farba: žltá, typ prevodu: automatický, emisná trieda: Euro 6, Výbava: ABS, klimatizácia, sadzový filter, Vehicle ID No.: YV2T0X1A0KZ122732 Unladen weight: 7,050 kg Meiller AK 7 NT skip loader with radio remote control & hydraulic container locking German roadworthiness inspection (HU) due ----FL – Short cab Engine brake, digital tachograph Air conditioning, radio with USB/Aux/Bluetooth Kdsdpfx Ajy Eambeiqek Toll pre-equipment, multifunction steering wheel Heated seat, lane assist, distance warning system Leaf suspension front and rear Wheelbase: 3,250 mm Shunting coupling 200-liter fuel tank Tyres: 265/70 R 19.5 Subject to change, prior sale, and errors excepted. The description serves for general vehicle identification only and does not constitute a warranty in the sense of sales law. The purchase contract description is binding. Our offer is generally without new TÜV certification. If new TÜV certification is desired, we will gladly provide a quote from our partner workshops! The vehicle may be provided with advertising decals and/or lettering. Our general terms and conditions of delivery and payment apply.

Stav: nový, číslo stroja/vozidla: Produktpalette, pohotovostná hmotnosť: 14 kg, maximálna hmotnosť nákladu: 35 kg, celková hmotnosť: 50 kg, konfigurácia náprav: 3 nápravy, veľkosť pneumatiky: 235 / 75 r 17,5, stav pneumatík: 100 percento, Ďalšie informácie Podvozok nízkoložného návesu Oceľová zváraná konštrukcia, sedlová doska s vymeniteľným 2" kráľovským čapom 24 t, 2-rýchlostný podperný zdvihák, ovládanie z jednej strany, s rovným spodkom, bez posuvného vyrovnávača Zadná podpera sklopná Kedsi Ri Hgspfx Aiqodk 2x kliny pod kolesá s držiakom Bočná ochrana proti nárazu z hliníka Štvrtinové blatníky pred a za nápravovým agregátom So zástierkami za každou nápravou 1x úložný box, šírka = 2 350 mm x dĺžka = 730 mm x výška = 640 mm, vpredu priečne pripevnený na podlahe labutieho krku, s 2 odkladacími policami Výsuvné rozšírenia do 3 000 mm (nie v zadnom sklone) (rozchod prepravovaných stavebných strojov alebo vozidiel nesmie presiahnuť vonkajšiu rámovú šírku 2 550 mm) Úložný priestor na drevené dosky na labuťom krku, vpredu priečne Drevené dosky 70 mm na rozšírenie do 3 000 mm Výrez pre násadu bagra začínajúci nad zadnými nápravami až po koniec, cca 500 mm široký a cca 230 mm hlboký Uväzovacie oká nízkozdvižného vozidla 3 páry uväzovacích ôk na 10 t vpredu na labuťom krku, 8 párov uväzovacích ôk na 10 t v nízkom ložisku, 3 páry uväzovacích líšt v oblasti prejazdovej dráhy v nízkom ložisku, 3 páry uväzovacích ôk na 10 t v oblasti náprav/zadnej časti Nápravy a odpruženie SAF bubnové nápravy Nápravy a podvozok laserovo zamerané pre zníženie opotrebenia pneumatík a spotreby paliva Nápravná riadiaca náprava Vzduchové odpruženie Kolesá a pneumatiky 235 / 75 R 17,5 podľa výberu výrobcu Oceľové disky v dvojmontáži, továrenská strieborná Brzdový systém 2-obvodová vzduchová brzdová sústava – farebné rozvody pre jednoduchší servis. Pružinová parkovacia brzda EBS, elektronický brzdový systém s EBS zásuvkou vpredu, bez prepojovacieho kábla Pozor: Prívesové vozidlo smie ťahať iba ťažné vozidlo zabezpečujúce účinnosť ABS! 2 zameniteľné spojovacie hlavice vpredu, bez prepojovacej linky S ventilom na zdvíhanie a spúšťanie, funkcia držania v spustenej polohe + funkcia automatického resetovania Rozpoznávanie zaťaženia náprav cez signál EBS-Canbus, na zobrazenie cez displej v kabíne vodiča, nákladné vozidlo musí byť vybavené, nie je inštalované v nákladných vozidlách (žiadna ciachovaná váha) Systém stability vozidla Trailer Infocenter na zobrazenie údajov o vozidle, ako sú zaťaženia náprav (žiadna ciachovaná váha), najazdené kilometre a diagnostické/systémové hlásenia Elektrika 24 voltov, viackomorové svietidlá, bočné žlté LED osvetlenie 2 biele pozičné svetlá vpredu v LED 2 bielo/červené obrysové svetlá vzadu 2 x 7-pinové zameniteľné zástrčky vpredu, bez prepojovacieho kábla 1x ďalší LED pracovný reflektor vzadu, ovládaný cez cúvacie svetlo 1x LED výstražné majákové svetlo s držiakom, ovládané cez obrysové svetlo (svetlo je odnímateľné) 2 páry výstražných tabúľ dvojité LED osvetlené a výsuvné na 3 000 mm Podlaha Labučí krk s oceľovým/ryhovaným plechovým povrchom V oblasti prejazdovej dráhy s 70 mm mäkkým drevom, v oblasti nad kolesami oceľový/ryhovaný plech, nízke ložisko vľavo a vpravo v oblasti prejazdovej dráhy hydraulicky zdvíhateľné cez prídavný pohon nákladného vozidla Zadný sklon so 70 mm mäkkým drevom Dĺžka nízkeho ložiska cca 6 300 mm Bočné steny 25 mm hliníkový dutý profil, 400 mm vysoký, vpredu a po bokoch na labuťom krku, nasadzovateľné Najazdové rampy Oceľové rampy 2 800 mm dlhé, 750 mm široké, bočne posuvné