Nooteboom Mco-73-04V Tele-Tieflader Rampen 4-Achs kúpiť použité (40 754)

Stav: nový, pohotovostná hmotnosť: 9 650 kg, maximálna hmotnosť nákladu: 30 350 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 740 mm, šírka ložného priestoru: 2 550 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 r17,5 zoll, Rok výroby: 2026, Výbava: ABS, stredová otočná doska, 4-AXLE LOWBED TRAILER WITH TOP-LEVEL EQUIPMENT! => HOT-DIP GALVANIZED (CHASSIS FRAME, TURNTABLE FRAME, ACCESS RAMPS) => FULL AIR SUSPENSION => WITH LIFTING AND LOWERING FUNCTION (REAR AXLE UNIT!) => SAF LOWBED AXLES => LASHING PACKAGE => PERFORATED OUTER FRAME FOR ADDITIONAL LASHING POINTS => CLEAT STRIPS ON THE REAR OF THE ACCESS SLOPE => 6 LASHING POINTS IN THE EXCAVATOR SHOVEL WELL AT THE REAR END => LONG ONE-PIECE ACCESS RAMPS => SHALLOW RAMP ANGLE Perm. Gross Weight: 40,000 kg Payload approx. 30,350 kg Chassis frame hot-dip galvanized Turntable frame hot-dip galvanized Access ramps hot-dip galvanized Air suspension SAF axle with drum brakes EBS - Electronic Braking System Tires: 235/75R17.5 – 16 ply Lowbed length approx. 7,160 mm Excavator stick recess approx. 3,000 mm x 730 mm x 180 mm at rear lowbed 4 pairs of 10 t recessed lashing rings in the lowbed 2 pairs of 10 t recessed lashing rings in the highbed 4 pairs of 3 t lashing points on lowbed outer frame 3 pairs of 6 t lashing eyes on outer frame Dsdpfx Ahshvxgzo Djkn 4 pairs of stake pockets on highbed outer frame 4 pairs of stake pockets on lowbed outer frame 3-meter widening package with fold-out extensions (no taper) 4 x warning boards with lighting Rotating beacon at the rear LARGE STEEL TOOLBOX under the loading area 2 storage compartments with hinged lids in the high platform Hydraulic ramp lifters One-piece ramps approx. 3,150 x 750 mm Softwood flooring on loading area and ramps 40,000 kg gross weight only with special permit according to §70 => Delivery freight: €2.90 plus VAT per km => All prices ex works D-86368 Gersthofen Your direct contact: Mr. Hauptmann, Tel. DOLL VEHICLE MANUFACTURING *Subject to prior sale and changes!* *Price valid ex D-86368 Gersthofen* *Sales only to commercial customers!* *Pictures may differ and are for general guidance only => may show/contain optional accessories subject to surcharge*

Stav: použitý, prvá registrácia: 11/2006, Rok výroby: 2006, MÜLLER - MITTELTAL T4 Kompakt Otočný čap - Nízkozdvižný príves so vzduchovým odpružením a kolískami na kolesá - 4 x vzduchom odpružené GIGANT - nápravy - vzduchové odpruženie - 4 x kolískové lôžka na kolesá - mechanické nájazdové rampy - 2 zadné podpery, sklopné - výsuvné výstražné tabule - ABS - Pneumatiky MICHELIN: 235/75 R 17.5 - Ťažké prevedenie: 40.000 kg celková hmotnosť - Pohotovostná hmotnosť: 8.400 kg - Celková dĺžka: 11.750 mm - Ťažné oko: 50 mm Obzvlášť vhodný na prepravu fréz na vápno! Dodpfjwmpbdsx Ah Djkn - Nemecký príves - STK/ kontrola bezpečnosti na želanie a za príplatok možná! Možné chyby a medzi-predaj vyhradený!

Stav: použitý, maximálna hmotnosť nákladu: 2 000 kg, celková hmotnosť: 3 500 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 08/2016, ďalšia kontrola (TÜV): 11/2025, Rok výroby: 2016, Výbava: ABS, SARIS TRAILER WITH 2-AXLE LOW-LOADER AND RAMP, TÜV VALID UNTIL 11/2025 ----VEHICLE EQUIPMENT---- * TYPE: C2C * 2 AXLES * DRUM BRAKES * ADJUSTABLE RAMP * IDEAL FOR MINI EXCAVATORS, FORKLIFTS, ETC. * LENGTH: 4 M * PERMISSIBLE GROSS WEIGHT: 3,500 KG * UNLADEN WEIGHT: 1,500 KG * PAYLOAD: 2,000 KG Dedpjuidc Refx Ah Dokn * TIRE SIZE: 185 / 70 R13 * TÜV: 11 / 2025 * EXPORT SALES ONLY WITH DEPOSIT, MIN. €500 - €2,000 ----EXPORT DECLARATION, CUSTOMS, EXW IN 10 MIN. (APPROVED EXPORTER), 5-DAY, 30-DAY LICENSE PLATES AND 17–21 DAYS AUSTRIAN LICENSE PLATES EURO 1 VEHICLE RESERVATIONS ONLY VIA THE EMAIL FUNCTION! ORAL RESERVATIONS ARE NOT VALID! For sales to EU and third countries a deposit of at least €500.00 / €1,000.00 is required. Changes, errors, and prior sale excepted! You can find additional vehicles on our website. Sales are made exclusively according to our general terms and conditions – see our website for details. Important note – Important information: Despite careful verification of all details in our offer, errors may still occur. Some of these might be caused by transmission errors in the systems of different platform providers. Therefore, please note all information is provided without guarantee and does not constitute a legal claim. Legal notice: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it serves as information for initiating a contract. The information provided here is not binding and does not constitute assured characteristics.

Stav: nový, pohotovostná hmotnosť: 12 000 kg, maximálna hmotnosť nákladu: 54 000 kg, celková hmotnosť: 66 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 245/70 R 17.5, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable loading platform design: - Extendable loading platform with rear chamfer approx. 1,000 mm x 8° - 5 pairs of fold-out lashing rings (LC 5,000 daN) - 3 pairs of fold-out lashing rings (LC 10,000 daN) - 1 pair of recessed lashing rings in the front loading area (LC 10,000 daN) - Cut-outs in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) - Hardwood flooring approx. 48 mm thick, over the axles with tread plate covering Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox, 24 t lifting capacity (50 t test load) Brake system: - WABCO braking system compliant with EU regulations with EBS-E (4S3M) Steel structure: - Steel structure made from high-strength fine-grained steels Axles and tyres: - BPW axles and suspension, 1st axle rigid, all other axles hydro-mechanically forced-steered - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Axle tool - TPMS tyre pressure monitoring system in accordance with ECE R 141 - Tyres 245/70 R 17.5 3PMSF Accessories included: - 2" king pin - Galvanised steel front wall approx. 400 mm high - At the galvanised front connection plate: yellow-red air couplings - 4 wheel chocks with holder on the front wall - 1 spare wheel with holder in front of the front wall - Electro-hydraulic power unit - Forced steering, front and rear, operated via cable remote control with push buttons, with tracking control for the axles - European reflector plates (red-yellow) at the rear of the trailer - White reflective tape on the sides and the extension, red at the rear, in accordance with EU regulations - On gooseneck and rear left and right: holder for warning boards including socket - Galvanised, extendable width extensions, ca. 230 mm per side - Holder for beacon at the rear of the trailer - Galvanised folding supports under the rear chamfer of the loading platform - Mudflap at the rear - Operating manual and description on USB stick - Central lubrication system BEKAMAX (Pico) with standard lubrication grease NLGI-2 and removable guard around the pump - Plug-in ALU side boards and rear board on the gooseneck approx. 2,440 x 400 mm - Rear galvanised stakes are removable (body length approx. 2,560 mm) Dksdpeykpbkofx Ah Don - INOX toolbox 1,350x400x400 on the gooseneck (note: box covers oil filler cap) - 4 pairs of WADER container pockets in the loading area for 1x 20ft, 2x 20ft, 1x 40ft, or 1x 45ft container - 7 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area - Sliding hook-in crossbar for ALU drive-on ramps at the rear - Square climbing bars 20 x 20 mm every 200 mm on the outside frame of the rear chamfer - Lift axle on the front axle with control via TEBS-E depending on axle load and current loading condition - Four warning boards extendable by approx. 400 mm, approx. 423 x 423 mm with a position light - Holder for beacon on the warning boards - Radio remote control for forced steering, in addition to cable remote, with indicator lights on receiver as single-track control - Non-slip sand coating painted onto tread plates on gooseneck and loading area - Speed stickers 80 km/h at the rear and on both sides - Load gauge for determining axle loads, including load diagram

Stav: nový, pohotovostná hmotnosť: 10 700 kg, maximálna hmotnosť nákladu: 38 800 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 r 17,5, farba: sivo-čierny, Výbava: ABS, Gooseneck: •Gooseneck with beveled front corners at 45° and rear chamfer approx. 750 mm x 10° •3 pairs of lash rings •30 mm thick hardwood decking Extendable Load Platform: •Extendable load platform with rear chamfer approx. 1,000 mm x 8° •Cut-outs in the outer frame of the load platform for attaching lashing straps •Approx. 48 mm thick hardwood decking, over the axles with chequer plate covering Two-piece Steel Ramps: •One pair of galvanized, two-piece steel ramps with approx. 48 mm thick hardwood covering •Ramps with hydraulically foldable ramp sections, hydraulic lifting system, and hydraulic lateral adjustment •Maximum capacity per pair: approx. 40,000 kg Axles and Tyres: •BPW axles and suspension, 2 rigid axles, 1 trailing steering axle •Technical axle load: 12,000 kg •Electromagnetic reverse lock, activated via reverse gear and manually •Air suspension with lift and lower valve •Axle tools Dksdpfxjhlz S Ne Ah Djn •235/75 R 17.5 3PMSF Braking System: •WABCO braking system according to EU regulations with EBS-E Paintwork: •First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component zinc dust primer •High-quality, single-tone 2-component topcoat in MB 7350 Novagrau •Rear section metalized and painted in RAL 9010 Landing Legs: •JOST landing gear with 2-speed gearbox for 24 t lifting capacity (50 t test load). Steel Construction: •Steel construction made from high-strength fine-grained steels •Steel grades: •S355J2+N/S355MC •S690QL/S700MC Electrical System: •Electrical system complying with EU regulations, 24 volt lighting •ASPÖCK-UNIBOX on the front connection board with 24N, 24S & 15-pin sockets Accessories Included: •One spare wheel with holder •One galvanized steel front wall approx. 400 mm high •Yellow-red air couplings on the galvanized front connection board •4 wheel chocks •A holder for a warning beacon at the rear of the trailer •Recess in the rear gooseneck area for ALU approach ramps •Galvanized folding supports under the chamfer of the load platform •Cover plates to bridge the gap between the ramps and the load platform •White reflective tape as per EU regulations on the sides, extension, and rear (red) •Electro-hydraulic unit at the rear, under the load platform •One holder each on the gooseneck and on each ramp, left and right, for warning signs incl. socket •Ramp control valves mounted on the right-hand side of the trailer •On the gooseneck, ALU side and rear boards approx. 2,440 x 400 mm •Rear galvanized plug-in stakes are removable (body length approx. 2,560 mm) •Four warning panels, extendable by approx. 400 mm, each with a position light •3 pairs of WADER container pockets in the platform for a 20ft, 30ft, or 40ft container •6 pairs of stake pockets (100x50 mm) in the outer frame of the load platform •Galvanized extensions, extendable by approx. 230 mm per side •20 x 20 mm square toehold strips every 200 mm on the outer frame of the platform chamfer •Sanded surface finish painted on the chequer plates, king pin, and load platform as anti-slip protection •Load gauge for determination of axle loads, including load diagram •HRM metallization (High Resistance Metallisation) of the outer frame •Complete steel structure shot-blasted, then the defined visible areas metallized with ZINACOR 850 (zinc 85% - aluminium 15%) by hot finish

Stav: nový, pohotovostná hmotnosť: 15 420 kg, maximálna hmotnosť nákladu: 61 080 kg, celková hmotnosť: 76 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 900 mm, veľkosť pneumatiky: 235/75/r17,5, farba: sivý, Výbava: ABS, Gooseneck: Gooseneck with rear bevel of approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading Area: Extendable loading area with rear bevel of approx. 500 mm x 8° 8 pairs of folding outward lashing rings 1 pair of flat lashing rings at the front of the loading area Cutouts in the outer frame of the loading area for securing load straps Approx. 48 mm thick hardwood flooring, non-slip checker plate cover above the axles Two-piece Steel Ramps: One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering. Ramp parts are hydraulically foldable, equipped with hydraulic lifting mechanism and hydraulic lateral adjustment. Maximum load per pair: 50,000 kg. Landing Legs: • JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: BPW axles and suspension, 4th and 5th axle steering Technical axle load: 12,000 kg 4th and 5th axles with electromagnetic reverse lock activated via reverse gear and manual operation Tyres 235/75 R 17.5 3PMSF Braking System: Braking system according to EU regulations with EBS-E (4S3M) Sockets and Lighting: Electrical system according to EU regulations, 24-volt lighting Dksdpfxsl Sl Izs Ah Djn ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets Connections according to ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paintwork: First-class and durable corrosion protection, achieved by standard shot-blasted welded frame with a 2-component (2K) zinc dust primer High-quality single color 2-component (2K) topcoat in MB 7350 Novagrau Rear section metallized and painted in RAL 9010 (Pure White) Metallic lacquer not available Steel Structure: Steel construction made from high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Accessories: One spare wheel with bracket in front of the bulkhead 2" kingpin Galvanized steel front wall approx. 400 mm high Yellow-red air couplings on the galvanized front connector strip 2 wheel chocks with holders on the front wall Provision at the rear of the gooseneck for ALU drive-on ramps Bracket for a beacon at the rear of the trailer Galvanized supports under the rear bevel of the loading area White reflector tape according to EU regulations on the sides, at the extension and rear red Electro-hydraulic unit at the rear under the loading area On gooseneck and rear panel (left and right) bracket for warning signs incl. socket Control valves for the ramps installed on the right side of the trailer A mud flap at the rear of the trailer Manual and description on USB stick 3.5" kingpin supplied loose On the gooseneck, plug-in ALU side walls and rear wall approx. 2,440 x 400 mm (LxH) Rear galvanized plug-in stakes are removable (Length of the structure approx. 2,560 mm) 3 pairs of WADER container pockets on the loading area for one 20' (30') or a 40' container 6 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading area Galvanized extensions, extendable by approx. 230 mm per side Lifting axle on the front axle, control via TEBS-E depending on current axle load and loading status Square climb strips 20 x 20 mm, every 200 mm on the outer frame of the loading area bevel On the checker plates, above the kingpin and the loa

Stav: nový, maximálna hmotnosť nákladu: 31 920 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 10 410 mm, šírka ložného priestoru: 2 500 mm, výška ložného priestoru: 900 mm, celková šírka: 2 550 mm, New Fliegl 4-Axle Low Loader Trailer with Ramps, Type VTS 400 Gross weight: 24,000kg / 40,000kg Unladen weight: 8,080kg Payload: 15,920kg / 31,920kg Overall length: 11,940mm Loading length: total approx. 10,410mm, gooseneck approx. 2,490mm, loading area incl. rear chamfer approx. 7,920mm Width: 2,550mm Loading height: 900mm Additional Information plus pre-carriage / provision ex yard 26639 Wiesmoor €1,280.00 / net Chassis low loader trailer Steel welded construction Turntable with robust ball race ring Foldable rear support 2 wheel chocks with holders Aluminium side underrun protection Full-width rear mudflap Half-shell mudguards on axles 1 and 2 with anti-spray mudflaps behind each axle Anti-spray mudflaps in front of and behind axles 3 and 4 Excavator stick trough above rear axles extending to rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep 2 pairs of lashing holes, each 5 t, in excavator trough on the longitudinal frame approx. 300 mm from the front and approx. 200 mm before rear slope 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Storage box on the gooseneck, flush-mounted with lid, W=720 mm / L=520 mm / D=170 mm Extendable load width to 3,000 mm (not in rear slope) (Note: Track width of machines/vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for timber beams underneath the low loader deck 70 mm timber beams for extension to 3,000 mm Low loader lashing points 1 pair tie-down cutouts in the longitudinal beam front, integrated in gooseneck, each 10 t 4 pairs of lashing holes in the outer frame, each 5 t (for securing straps) 9 pairs of lashing mushrooms, top and side mounted in outer frame, each 10 t 2 x on the gooseneck 7 x in the low bed area First tie-down point 250 mm from front and last max. 250 mm from rear, spacing not greater than 1,100 mm 3 additional pairs of folding lashing rings, each 10 t 1 x on gooseneck (protruding) 1 x at start of low bed, integrated in longitudinal members 1 x behind last axle, integrated in floor Trailer coupling device, turntable Drawbar with tested 50 mm towing eye Drawbar height adjustable via spring Axles & Suspension Drum brake axles, manufacturer’s choice "Axles/chassis laser measured" to reduce tire wear and fuel consumption Air suspension with raise & lower valve + auto-reset function Wheels and tyres 235/75 R 17.5" manufacturer’s choice Steel rims, dual configuration, factory silver Brake system 2-line compressed air braking system Spring-loaded parking brake Axle load detection via EBS CAN bus signal, for display in the cab (truck must be pre-equipped, no truck installation/no calibrated scale) Vehicle – Driving Stability System Dodpfx Aoxrx Nloh Dskn 2 anti-mix-up coupling heads at the front with connecting lines to the towing vehicle 12-24 Volt EBS, electronic braking system with EBS plug at front and connection cable Brand: Knorr Note: This trailer may only be towed by vehicles ensuring the effectiveness of the ABS! Electrics 12-24 Volt, multi-chamber LED lights, side yellow LED marker lights, number plate in LED (Note! With some towing vehicles, incorrect diagnostics may occur despite functioning properly) 2 front white position lights in LED 2 white/red lane marker lights at rear in LED 2 x 7-pin anti-mix-up plugs at front with connecting cable 1 LED beacon light with holder, switched via parking light (removable lamp)

Stav: nový, maximálna hmotnosť nákladu: 43 929 kg, celková hmotnosť: 58 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 16 690 mm, šírka ložného priestoru: 2 550 mm, celková šírka: 2 550 mm, celková výška: 3 570 mm, Výbava: ABS, Kässbohrer K.SLA R 4 / 2N ? 18/40 Low Loader, telescopic with wheel recesses (NEW) ----Features & Highlights Technology & Construction - Extendable low loader with wheel recesses - Overall length: 13,190 mm; platform: 9,240 mm + 3,500 mm extension - Platform height: only 875 mm for low loading height - Total width: 2,550 mm + 600 mm extensions - Unladen weight: approx. 14,071 kg - Permitted total weight: 58,000 kg (80 km/h) / 63,800 kg (60 km/h) Chassis & Axles - 4 BPW axles, 2 fixed at the front, 2 self-steering at the rear Dkedex Efznepfx Ah Den - Lifting axle (automatic + manual) - Air suspension with load gauge - WABCO EBS 4S/3M, ABS & RSS - WABCO Smartboard (axle load, suspension, diagnostics) - 16x tyres 245/70 R17.5 (M+S + 3PMSF) - Tyre pressure monitoring system to R141 Ramps & Loading Area - Foldable 40-tonne ramps - Ramp length: 2,750 mm, width: 850 mm - Hydraulic sliding system - 45 mm hardwood floor + steel chequer plate over wheel arches - Wheel recesses + cover bridges included - Excavator boom recess at the rear Load Securing Extensive lashing points: - 2×2 lashing rings 5,000 daN & 1×2 lashing rings 10,000 daN at the gooseneck - 3×2 lashing rings 5,000 daN & 4×2 lashing rings 10,000 daN on the platform - 8,000–10,000 daN at the outer frame / recess area - 5×2 stake pockets, removable stakes 50×100 mm - Container locks for 1×20 ft or 1×30 ft containers Equipment & Comfort - 1× toolbox (700×400×360 mm) - Stake holder box - Rotating beacon - LED side lights, LED work lights - Wheel chocks - Extension boards with LED - Standard 2" king pin - Metallized chassis (Zn/Al 85/15) – high corrosion protection - Colour: RAL 9005 Black ----Special Features - New & immediately available - High payload, extremely versatile - Perfect for machine transport, construction machinery, vehicles, etc. - Very robust construction, high-quality BPW components For further information, please do not hesitate to contact us.

Stav: nový, maximálna hmotnosť nákladu: 43 929 kg, celková hmotnosť: 58 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 16 690 mm, šírka ložného priestoru: 2 550 mm, celková šírka: 2 550 mm, celková výška: 3 570 mm, Rok výroby: 2025, Výbava: ABS, Kässbohrer K.SLA R 4 / 2N ? 18/40 Telescopic Low Loader with Wheel Wells (NEW) ----Equipment & Highlights Technology & Bodywork Telescoping low loader with wheel wells * External length 13,190 mm, platform 9,240 mm + 3,500 mm extension * Platform height only 875 mm for low loading height * Total width 2,550 mm + 600 mm extension * Unladen weight approx. 14,071 kg * Permissible total weight: 58,000 kg (80 km/h) / 63,800 kg (60 km/h) Chassis & Axles 4 BPW axles, front 2 rigid, rear 2 trailing axles * Lift axle (automatic + manual) * Air suspension with load gauge * WABCO EBS 4S/3M, ABS & RSS * WABCO Smartboard (axle load, suspension, diagnostics) * 16x tires 245/70 R17.5 (M+S + 3PMSF) * Tire pressure monitoring system according to R141 Ramps & Loading Area Folding 40-ton ramps * Ramp length 2,750 mm, 850 mm width * Hydraulic sliding system * 45 mm hardwood floor + steel chequer plate over wheel arches * Wheel wells + covering bridges included Dedsx Ix Rqspfx Ah Dekn * Excavator arm recess at rear Load Securing Extensive lashing points: * 2×2 lashing rings 5,000 daN & 1×2 lashing rings 10,000 daN on gooseneck * 3×2 lashing rings 5,000 daN & 4×2 lashing rings 10,000 daN on platform * 8,000–10,000 daN on outer frame / wheel well area * 5×2 stake pockets, removable stakes 50×100 mm * Container lock for 1×20 ft or 1×30 ft Features & Comfort 1× toolbox (700×400×360 mm) * Stake pocket box * Beacon light * LED side lighting, LED work lights * Wheel chocks * Extension panels with LED * Standard 2" king pin * Metallized chassis (Zn/Al 85/15) – strong corrosion protection * Color: Red ----Special Features * New & immediately available * High payload, extremely versatile * Perfect for machine transport, construction machinery, vehicles, etc. * Very robust construction, high-quality BPW components For further information, we are at your disposal.

Stav: nový, maximálna hmotnosť nákladu: 31 920 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 10 410 mm, šírka ložného priestoru: 2 500 mm, výška ložného priestoru: 900 mm, celková šírka: 2 550 mm, Nové vozidlo Fliegl nízkoložný príves so 4 nápravami a nájazdovými rampami, typ VTS 400 Celková hmotnosť: 24 000 kg / 40 000 kg Pohotovostná hmotnosť: 8 080 kg Užitočné zaťaženie: 15 920 kg / 31 920 kg Celková dĺžka: 11 940 mm Nakladacia dĺžka: celkom cca 10 410 mm, znížená časť cca 2 490 mm, ložná plocha vrátane zadného skosenia cca 7 920 mm Šírka: 2 550 mm Nakladacia výška: 900 mm Ďalšie informácie Príplatok za dopravu / prípravu zo skladu 26639 Wiesmoor: 1 280,00 EUR bez DPH Leasingová ponuka: doba trvania 48 mesiacov, akontácia len DPH, zostatková hodnota 40 % mesačná splátka: 759,00 EUR Podvozok nízkoložného prívesu Oceľová zváraná konštrukcia Otočný čap s robustným ložiskovým krúžkom Skopné zadné podpery 2 zakladacie kliny s držiakom Bočná ochrana z hliníka Zadná blatníková lišta po celej šírke Polovičné blatníky na 1. a 2. náprave s protišpliechacími zásterkami za každou nápravou, protišpliechacie zásterky pred a za 3. a 4. nápravou Výrez pre násadu bagra nad zadnými nápravami až po koniec prívesu, cca 1 800 mm dĺžka, cca 650 mm šírka a cca 150 mm hĺbka Dedpfx Aevv D Ixsh Dskn 2 páry zaťažovacích otvorov po 5 t v priestore na násadu bagra po bokoch pozdĺžneho rámu, cca 300 mm odpredu a cca 200 mm pred zadným skosením 1 plastový uzamykateľný náradový box, š=600 mm / v=425 mm / h=460 mm Skladovací box v zníženej časti podlahy s vekom, Š=720 mm / D=520 mm / H=170 mm Rozšírenie vysúvateľné na 3 000 mm (nie v zadnom skosení) (Rozchod prepravovaných stavebných strojov resp. vozidiel nesmie prečnievať cez vonkajšiu šírku rámu 2 550 mm) Úložný priestor na drevené hranoly pod ložnou plochou Drevené hranoly 70 mm pre rozšírenie na 3 000 mm Kotviace oká na nízkoložnom prívesu 1 pár kotviacich výrezov vo vnútornom nosníku vpredu (znížená časť), každé po 10 t 4 páry otvorov na vonkajšom ráme, každé po 5 t (uchytenie napínacích pásov) 9 párov kotviacich húb zvrchu a zboku vo vonkajšom ráme po 10 t 2 × vpredu na zníženej časti 7 × v ložnej časti Prvé kotviace oko 250 mm odpredu, posledné max. 250 mm odzadu, rozstup nie väčší ako 1 100 mm 3 páry výklopných kotviacich ôk navyše, po 10 t 1 × na zníženej časti (vystupuje) 1 × začiatok ložnej plochy vnútri pri nosníkoch 1 × za poslednou nápravou v podlahe Ťažné zariadenie pre príves s otočným čapom Ťažná tyč so schváleným 50 mm ťažným okom Nastavenie výšky ťažnej tyče cez pružinu Nápravy a odpruženie Bubnové nápravy podľa výberu výrobcu „Nápravy/podvozok laserovo zmerané" – znižuje opotrebenie pneumatík a spotrebu paliva Vzduchové odpruženie so zdvíhacím a znížovacím ventilom + automatická resetovacia funkcia Kolesá a pneumatiky 235 / 75 R 17,5" podľa výberu výrobcu Oceľové disky v dvojmontáži, výrobná strieborná farba Brzdový systém Dvojokruhový vzduchotlakový brzdový systém Pružinová parkovacia brzda Detekcia zaťaženia nápravy cez EBS-Canbus signál, pre zobrazenie na displeji v kabíne vodiča, nákladné vozidlo musí byť príslušne pripravené, nie je nainštalované v LKW (nie je overená váha) Systém stability jazdy vozidla 2 zameniteľné spojovacie hlavy vpredu s prepojovacími vedeniami k ťažnému vozidlu 12-24 Volt EBS, elektronický brzdový systém s EBS konektorom vpredu a prepojovacím káblom Značka Knorr Pozor: Príves sa smie ťahať len ťažnými vozidlami, ktoré zabezpečujú funkciu ABS! Elektrická výbava 12-24 Volt, viackamrové LED svetlá, na bokoch žlté LED osvetlenie, LED osvetlenie ŠPZ (Poznámka! Pri niektorých ťažných vozidlách môže dochádzať k chybným hláseniam, aj keď funkcia je zabezpečená) 2 biele pozičné sve

Stav: nový, maximálna hmotnosť nákladu: 31 100 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 10 410 mm, šírka ložného priestoru: 2 500 mm, výška ložného priestoru: 900 mm, celková šírka: 2 520 mm, Total weight: 24,000 kg / 40,000 kg Unladen weight: 8,900 kg Payload: 15,100 kg / 31,100 kg Overall length: 11,940 mm Loading length: 10,410 mm total, 2,490 mm gooseneck, 7,920 mm loading bed including rear slope Width: 2,520 mm Loading height: 900 mm Further information: Plus pre-carriage / provision ex stock location 26639 Wiesmoor: €1,280.00 / net Steel welded construction Turntable with robust ball race Foldable rear support stands Wheel chocks with holders Aluminum side underrun protection Full-width rear mudflaps (not in combination with forklift holder) Half-shell mudguards 1st & 2nd axle with anti-spray mudflaps behind each axle Anti-spray mudflaps in front of and behind 3rd and 4th axle Digger boom trough over the rear axles, starting to the rear, approx. 1,800 mm long, approx. 650 mm wide, approx. 150 mm deep 2 pairs of lashing holes each rated 5 t in the digger trough, located on the side of the longitudinal frame approx. 300 mm from the front and approx. 200 mm before the rear slope 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable 1 storage box recessed in the floor at the gooseneck with cover, W=720 mm / L=520 mm / D=170 mm Extendable widenings to 3,000 mm (not in rear slope area) (The track width of construction machinery or vehicles to be transported must not exceed the outside frame width of 2,550 mm) Storage compartment for timber planks beneath the low-bed area 70 mm timber planks for widening to 3,000 mm Low loader lashing eyes 1 pair tie-down cutouts embedded in the main beam at the front of the gooseneck, each 10 t 4 pairs lashing holes in the outer frame, each 5 t (for ratchet strap attachment) 9 pairs of lashing mushrooms recessed in/outside the outer frame, each 10 t 2x located at the front on the gooseneck 7x in the low deck First lashing eye 250 mm from the front, last max. 250 mm from the rear, distance between lashing eyes not more than 1,100 mm 3 additional pairs of folding lashing eyes, each 10 t 1x on the gooseneck (protruding) 1x at the beginning of the low bed, inside the main beams 1x behind the last axle, recessed in the floor Towing device for turntable trailer Dkodperducpjfx Ah Don Drawbar with certified 50 mm towing eye Drawbar height adjustment by spring Axles & suspension Drum brake axles, manufacturer’s choice “Axles/chassis laser-aligned” to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation, front and rear (equalizer balancing) Wheels and tires 235/75 R 17,5”, manufacturer’s choice Steel twin wheels, factory silver Brake system 2-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front with connections to the tractor unit 24 Volt ABS and ALB, with ABS plug at the front and connector cable Attention: The trailer may only be towed by vehicles that ensure the ABS is effective! Electrics 12–24 Volt, multi-chamber LED lights, side yellow LED lights, LED license plate light (Note! On certain towing vehicles, false diagnostics may occur despite full functionality) 2 white front position lights in LED 2 white/red lane marker lights rear in LED 2 x 7-pin non-interchangeable plugs at the front, with connector cable 1 LED beacon with bracket, controlled via parking/side light (removable beacon) 2 pairs of double warning panels, LED illuminated and extendable up to 3,000 mm Floor Gooseneck with steel chequer plate covering Followed by approx. 70 mm softwood flooring, steel cheque

Stav: použitý, konfigurácia náprav: 3 nápravy, prvá registrácia: 07/2020, dĺžka ložného priestoru: 5 750 mm, šírka ložného priestoru: 2 150 mm, výška ložného priestoru: 900 mm, rázvor náprav: 1 000 mm, typ prevodu: iný, kabína vodiča: iný, brzdy: iný, * Nemecký príves * 1. majiteľ * Stav viď fotografie * Špeciálny príves s trojitým (tridem) nápravovým podvozkom a delenou ložnou plochou * Predná nadstavba s dvojstranným elektricky vyklápateľným mrežovým nadstavcom * Za tým plošina/valník/náves na nízkej plošine + nájazdové rampy * Veľká ložná plocha s protišmykovými preglejkovými doskami a kotviacimi okami podľa DIN Djdpfexnqv Aex Ah Dokn * Ideálny pre záhradníctvo, stavebníctvo a mnohé ďalšie odvetvia * Rozmery ložnej plochy: 3,75 m x 2,15 m x 0,35 m, hliníkové bočné zábrany * Užitočné zaťaženie: 2 230 kg * Kippovacia plocha: 2,00 m x 2,15 m x 0,90 m * Elektrický hydraulický výklop so sťahovacím ovládaním * Povolenie na 100 km/h * Výklopná plocha so zinkovanou oceľovou podlahou * Tridem (trojitá) náprava * Celková povolená hmotnosť: 3 500 kg * Pohotovostná hmotnosť: 1 270 kg * Užitočné zaťaženie: 2 230 kg Ak si želáte nové schválenie TÜV, radi Vám zašleme ponuku našich partnerských servisov. Naša ponuka je vo všeobecnosti BEZ novej TÜV kontroly, bez novej DGUV, bez novej SP, bez novej UVV. Ďalšie nákladné vozidlá nájdete na našej domovskej stránke pod Hovoríme nasledujúcimi jazykmi: nemecky, anglicky, poľsky, turecky Upozornenie: Ponúkame a zároveň dôrazne odporúčame osobnú obhliadku a kontrolu tovaru, aby sa predišlo nedorozumeniam ohľadom stavu a vhodnosti pre kupujúceho. Obhliadka a skúška sú možné kedykoľvek po dohode a sú výslovne vítané. Všetky informácie sú bez záruky. Za chyby a nesprávne údaje v ponuke sa neručí. Kupujúci je povinný sám sa presvedčiť o stave a výbave tovaru/vozidiel. Zmeny, medzipredaj a omyly vyhradené.

Stav: nový, pohotovostná hmotnosť: 14 350 kg, maximálna hmotnosť nákladu: 53 450 kg, celková hmotnosť: 67 800 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 800 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Výbava: ABS, zdvíhacie čelo, Swan neck: - Swan neck in SNT design to optimize the loading platform length, approx. 3,700 mm long - Swan neck at the rear with a taper, approx. 1,000 mm x 10° - Suitable for tractor units: 6x2, 6x4, 8x4 short Loading platform: - Extendable loading platform, approx. 8,800 mm long, with a rear taper of approx. 500 mm x 10° - Recess in the loading platform, including into the taper, to accommodate the excavator stick, approx. 3,850 x 750 x 210/290 mm Two-piece steel ramps: - One pair of two-piece steel ramps, approx. 4,350 mm long and approx. 900 mm wide - Ramps with rubber lining - Ramps can be hydraulically moved individually approx. 235 mm outward and approx. 215 mm inward - "Super Grip" rubber flooring 25 mm and metal flooring approx. 5 mm as additional reinforcement on the platform’s taper - Square climbing strips 20 x 30 mm, spaced approx. every 200 mm along the external ramp frame Axles, suspension, and tyres: - BPW axles and suspension, first axle steering ahead, all other axles hydromechanically forced-steered - Technical axle load: 12,000 kg - First axle with electromagnetic reverse lock, activated by reverse gear and manually selectable - Air suspension with lift and lower valve - Tyres 235/75 R 17.5 - TPMS tyre pressure monitoring system according to ECE R141 - TPMS sensors mounted in all wheels including spare wheels Surface treatment: - Complete steel construction shot-blasted after welding using a shot blasting plant - Second round of blasting with corundum for optimum coating adhesion - HRM-metallisation of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection - Final painting with 2 coats of 2K top coat in single colour MB 7350 Novagrau Accessories included: - Plug-in steel front wall, approx. 400 mm high - 3kW electro-hydraulic power unit for controlling hydraulic functions, excluding hydraulic winches Dksdpfxeya E A Nj Ah Djn - 1 spare wheel - External member on the swan neck with mounting holes for boltable lashing rings - First hole approx. 200 mm from the front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - 1 pair of horizontal lashing rings at the rear of the swan neck - On the swan neck: 1 pair of plug-in ALU side walls, approx. 400 mm high, anodised - On the swan neck: one plug-in ALU rear wall, approx. 400 mm high, anodised - Over the swan neck approx. 40 mm thick hardwood flooring, over the king pin area treadplate covering - 2" king pin - Round NATO socket on the front connection strip - 4 wheel chocks - 1 intermediate table, approx. 300 mm wide - 1 pair of lashing rings on the front cross member - 8 pairs of recessed lashing rings in the outer frame of the platform, foldable to the outside - Extendable (galvanised) widenings by approx. 230 mm each side - Wheel recesses with square climbing strips, 15 x 15 mm before the axles, open all the way to the swan neck cross member, approx. 700 x 410 mm - Wheel recesses with square climbing strips, 15 x 15 mm between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm - ALU covers for the wheel recesses, which can also be used as bridging elements for the extension or as widening planks - 1 pair of mechanical rear supports - Radio and cable remote control - Lift axle on the front axle - Square climbing strips 20 x 30 mm, approx. every 200 mm - Central lubrication system with 1 pump - Wabco Smart Board system - 4 warning panels, approx. 423 x 423 mm, extendable by approx. 400 mm

Stav: nový, pohotovostná hmotnosť: 10 600 kg, maximálna hmotnosť nákladu: 39 400 kg, celková hmotnosť: 50 960 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 760 mm, zavesenie: vzduch, veľkosť pneumatiky: 205/65 R17.5, farba: sivý, prevádzková hmotnosť: 10 600 kg, Výbava: ABS, Gooseneck: - Gooseneck with 30 mm hardwood floor - Gooseneck in straight design at the rear - 3 pairs of lashing rings (LC 5,000 daN) Extendable loading area: - Loading area in extendable version - 5 pairs of lashing rings foldable outwards - 3 pairs of lashing rings foldable outwards - 1 pair of lashing rings laid flat at the front of the loading area - Cut-outs in the outer frame of the loading area for attaching tension belts - Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering Landing legs: - JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and tyres: Dsdpfst Ag Uwex Ah Dekn - BPW axles, two rigid, two trailing steering axles - Air suspension, with drum brakes, with lifting/lowering function - The trailing steering axles with electro-magnetic reversing lock, can be activated either via reverse gear or manually - Axle tools - Tyres 205/65 R17.5 Brake system: - Brake system in accordance with EU regulations with EBS-E (4S3M) Steel construction: - Steel construction made of high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system in accordance with EU regulations, 24-volt lighting, ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets - Connections according to ISO: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Paintwork: - First-class and long-lasting corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) top coat, single-colour in Novagrau - Rear section metalized and painted in RAL 9010 (pure white) Included accessories: - One spare wheel with holder in front of the front wall - 2" kingpin - Galvanized steel front wall approximately 400 mm high - Yellow-red air couplings on the galvanized connection bar at the front - 4 wheel chocks with holders on the front wall - Galvanized folding supports under the sloped loading area - Bracket for a revolving beacon at the rear of the trailer - Galvanized, extendable width approx. 230 mm per side - White reflective tape to EU regulations on the side, at the extension, and red at the rear - At the gooseneck and on the rear plate, left and right, one bracket for warning signs each, including socket - European reflective warning plates (red-yellow) at the rear of the trailer - TPMS tyre pressure monitoring system according to ECE R 141 - On the gooseneck, plug-in aluminium side and rear panels approx. 2,440 x 400 mm - The rear, galvanized plug-in stakes are removable, length of the structure approx. 2,560 mm - 7 pairs of WADER container locks - 1x 20ft container on the loading area; 1x 40ft container on the loading area; 1x 40ft container above the gooseneck; 2x 20ft containers - 7 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area - Lift axle at the front axle controlled by TEBS E, depending on current axle load and load condition - Movable hanging bar for aluminium approach ramps at the rear of the vehicle - On checker plates on the gooseneck and loading area, a painted-in sand layer as anti-slip protection - Four warning signs each extendable by approx. 400 mm, size approx. 423 x 423 mm, with position light - On warning signs, bracket for rotating beacon - 80 km/h speed stickers on the rear and both sides - Load manometer for determining axle l

Stav: nový, pohotovostná hmotnosť: 15 900 kg, maximálna hmotnosť nákladu: 63 500 kg, celková hmotnosť: 68 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 12 700 mm, šírka ložného priestoru: 2 740 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75/r17,5, farba: sivý, prevádzková hmotnosť: 52 100 kg, Výbava: ABS, Gooseneck: Gooseneck in SNT design to optimize the loading area length, approx. 3,300 mm long, rear with chamfer approx. 1,000 mm x 10° Technical fifth-wheel load: 23,000 kg For tractor units: 6x2, 6x4, and 8x4 Loading Area: Extendable loading area, approx. 9,400 mm long with rear chamfer approx. 500 mm x 10° A recess in the loading area and chamfer for the excavator dipper stick, approx. 3,850 x 950 x 210/290 mm Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the respective loading length Axles and Tyres: BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanically forced-steered Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tools 235/75 R 17.5 3PMSF twin tyres Load index 143/141J (144/144F) Two-piece Steel Ramps: One pair of two-piece steel ramps approx. 4,350 mm long and approx. 900 mm wide Hardwood covering Hydraulically folding ramp tips; each ramp can be hydraulically shifted approx. 235 mm outward and approx. 215 mm inward Braking System: WABCO EBS-E brake system in accordance with EU regulations Sockets and Lighting: 24-volt lighting system Full Metallization: Complete HRM metallization with ZINACOR 850 for maximum corrosion protection Surface Treatment: Entire steel structure automatically blast-cleaned with shot wheels after welding Second blast cleaning with corundum for optimum coating adhesion Final painting in single-color Nova Gray with two coats of 2K paint; cavities then sealed with special wax Rims in silver gray Steel Structure: Steel structure made of high-strength fine-grain steels Steel grades: S355J2+N/S355MC S690QL/S700MC Accessories: Detachable steel front wall, approx. 400 mm high Supply line connection rail for tractor unit Coiled cable to supply the electro-hydraulic power unit and/or electric winch between semi-trailer and tractor unit with plug; electro-hydraulic unit for controlling hydraulic functions, except hydraulic winches Gooseneck side members with mounting holes for bolted lashing rings First hole approx. 200 mm from the front, subsequently every approx. 400 mm A mounting hole in the upper rear area of the gooseneck side member for a bolted lashing ring Approx. 40 mm thick hardwood covering above the gooseneck, checker plate covering above the kingpin Guide plate from the gooseneck for the fifth-wheel plate, approx. 500 mm wide Continuous 50 mm thick hardwood covering on the loading platform and interrupted hardwood between the axles Loading platform locking with conically welded locating profiles every 250 mm, including prestressing plate Slotted holes for insertable and adjustable bridging elements: on the fixed part behind the gooseneck at the front of the loading area 1 movable intermediate table for the extension tube with large cross-section Control valves for hydraulic ramps on the right side of the vehicle Dsdpfemfqi Ijx Ah Dokn Central lubrication system with 1 pump, with standard grease in accordance with NLGI-2 Radio remote control for operating the steering, in addition to the cable remote control; receiver features two indicator lights for single-track monitoring

Stav: použitý, maximálna hmotnosť nákladu: 23 700 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 01/2023, dĺžka ložného priestoru: 8 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 900 mm, celková šírka: 2 550 mm, Celková hmotnosť: 24 000 kg / 30 000 kg Pohotovostná hmotnosť: 6 300 kg Užitočné zaťaženie: 17 700 kg / 23 700 kg Celková dĺžka: 10 900 mm Dĺžka ložnej plochy: celkom 8 600 mm, 6 500 mm vrátane zadného skosenia, 2 100 mm krk Šírka: 2 550 mm Výška ložnej plochy: 900 mm Ďalšie informácie: - Robustná zváraná konštrukcia z vysokopevnej jemnozrnnej ocele - Žiarovo pozinkované prevedenie - Zadná opora - Dvojmontáž pneumatík 235/75R17,5 - Výstražné tabule Dodowrv Sajpfx Ah Dokn - LED cúvacie svetlá - Uchytenie nákladu – vonkajší rám - 4x upevňovacie oká v krku, 6x v nízkom lôžku (10 000 daN) - Jednodielne žiarovo pozinkované nájazdové rampy (3 100 mm x 750 mm) s 50 mm mäkkým dreveným povrchom, posuvné do strán - Odkladací box v krku - Plastový náradový box - Nárazník - Podlaha s 50 mm mäkkým drevom - Zadné lešenie/lišty pre stúpanie na nábehovom sklone

Stav: použitý, celková hmotnosť: 50 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 11/2012, * Gigantná náprava * Vzduchové odpruženie * Riadená dojazdová náprava * Výsuvné * Pohotovostná hmotnosť: 10.920 kg Dsdpfowta Disx Ah Dskn -----Interné číslo vozidla: 9799----Omyly a medzipredaj vyhradené. WhatsApp podpora k dispozícii! V prípade otázok o vozidle alebo pre ďalšie informácie nás kontaktujte pohodlne cez WhatsApp Whatsapp nemecky, anglicky -- Whatsapp nemecky, anglicky, arabsky

Stav: použitý, konfigurácia náprav: 3 nápravy, prvá registrácia: 05/2008, * Výsuvný * Riadená náprava za jazdy * Hydraulické nakladacie rampy * Vzduchové odpruženie Dkedex I Uyhopfx Ah Don -----Interné číslo vozidla: 11555----Chyby a medzipredaj vyhradený WhatsApp podpora k dispozícii! V prípade otázok o vozidle alebo pre ďalšie informácie nás neváhajte kontaktovať cez WhatsApp WhatsApp Nemecky, Anglicky -- WhatsApp Nemecky, Anglicky, Arabsky

Stav: nový, pohotovostná hmotnosť: 7 950 kg, maximálna hmotnosť nákladu: 37 050 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, zavesenie: vzduch, veľkosť pneumatiky: 235 / 75 R 17,5, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235 / 75 R 17,5, veľkosť zadnej pneumatiky: 235 / 75 R 17,5, kabína vodiča: iný, emisná trieda: žiadny, palivo: biodiesel, Výbava: ABS, pneumatická brzda, Zosilnené vyhotovenie, vzduchové odpruženie so zdvíhacou nápravou, manometer pre zaťaženie nápravy, dĺžka vysokého loža cca 4 140 mm, dĺžka nízkeho loža cca 8 600 mm, ložná výška cca 900 mm, pre 2-nápravové a 3-nápravové ťahače, čelná stena cca 1 600 mm vysoká, 18 vreciek na stĺpiky v vonkajšom ráme, 3 priečne nosníky na stĺpiky, 24 kotviacich ôk, 4 páry kontajnerových zámkov pre 2 x 20 ft alebo 1 x 40 ft ISO kontajner, príplatok za hliníkové rampy – cena: 1 900 €, rezervné koleso – cena: 300 €, -- Tlačové chyby, omyly a zmeny vyhradené, ilustračné obrázky --, Viac údajov na: !, Ďalšie detaily na: ! Dedpfx Ahozb Dn Tj Dokn

Stav: použitý, konfigurácia náprav: 3 nápravy, prvá registrácia: 02/2007, celková dĺžka: 13 630 mm, celková šírka: 2 540 mm, zavesenie: vzduch, veľkosť pneumatiky: 245/70 R 17.5, rázvor náprav: 10 370 mm, Rok výroby: 2007, Výbava: ABS, = Ďalšie možnosti a výbava = - Vzduchové pruženie = Ďalšie informácie = Konfigurácia náprav Rozmer pneumatík: 245/70 R 17.5 Značka náprav: SAF Brzdy: bubnové brzdy Pruženie: vzduchové pruženie Zadná náprava 1: dvojmontáž; riadená; dezén pneu vľavo vnútri: 20%; dezén pneu vľavo vonku: 20%; dezén pneu vpravo vnútri: 20%; dezén pneu vpravo vonku: 20% Zadná náprava 2: dvojmontáž; riadená; dezén pneu vľavo vnútri: 30%; dezén pneu vľavo vonku: 30%; dezén pneu vpravo vnútri: 30%; dezén pneu vpravo vonku: 30% Zadná náprava 3: dvojmontáž; riadená; dezén pneu vľavo vnútri: 20%; dezén pneu vľavo vonku: 20%; dezén pneu vpravo vnútri: 20%; dezén pneu vpravo vonku: 20% Hmotnosti Pohotovostná hmotnosť: 16 520 kg Užitočné zaťaženie: 28 480 kg Celková prípustná hmotnosť: 45 000 kg Funkčnosť Výška ložnej plochy: 95 cm Stav Poškodenia: žiadne Dedpfx Ajzb Hptoh Dekn Identifikácia ŠPZ: OJ-64-RY

Stav: použitý, maximálna hmotnosť nákladu: 23 340 kg, celková hmotnosť: 36 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 08/2002, dĺžka ložného priestoru: 11 000 mm, šírka ložného priestoru: 2 520 mm, celková šírka: 2 540 mm, celková výška: 2 300 mm, Výbava: ABS, Nooteboom nízkozdvižný podvalník + labutia šija a 3 riadené nápravy Typ: EURO5403 Užitočné zaťaženie: 23 340 kg Brzdy: bubnové + s odnímateľnou labutou šijou Dkjdpfx Ajy Rvuxsh Don + všetky nápravy riadené diaľkovým ovládačom + diaľkové ovládanie v cene Radi vám pomôžeme aj s financovaním/leasingom cez našich partnerov. Všetky údaje sú bez záruky. Možné chyby a medzičasný predaj vyhradené.

Stav: použitý, konfigurácia náprav: 3 nápravy, prvá registrácia: 06/2007, dĺžka ložného priestoru: 9 230 mm, šírka ložného priestoru: 2 520 mm, výška ložného priestoru: 910 mm, celková dĺžka: 13 840 mm, celková šírka: 2 540 mm, celková výška: 1 600 mm, zavesenie: vzduch, veľkosť pneumatiky: 245/70R17.5, rázvor náprav: 7 950 mm, farba: červená, Rok výroby: 2007, Výbava: ABS, = Ďalšie možnosti a príslušenstvo = - Skrinka na náradie - Centrálne mazanie = Poznámky = Výška oje: 98 cm. Celková dĺžka: 1353 cm + 670 cm + 670 cm. Ložná plocha: 923 cm + 670 cm + 670 cm. Nakladacia výška: 93 cm / zaťažené 91 cm. SAF náprava 3 x nútené riadenie. Diaľkové riadenie s káblom. = Ďalšie informácie = Konfigurácia náprav Rozmer pneumatík: 245/70R17.5 Brzdy: Bubnové brzdy Odpruženie: Vzduchové odpruženie Zadná náprava 1: Dvojmontáž; Riadená; Profil pneu vľavo vnútri: 60 %; Profil pneu vľavo vonku: 60 %; Profil pneu vpravo vnútri: 60 %; Profil pneu vpravo vonku: 60 % Zadná náprava 2: Dvojmontáž; Riadená; Profil pneu vľavo vnútri: 50 %; Profil pneu vľavo vonku: 50 %; Profil pneu vpravo vnútri: 50 %; Profil pneu vpravo vonku: 50 % Zadná náprava 3: Dvojmontáž; Riadená; Profil pneu vľavo vnútri: 45 %; Profil pneu vľavo vonku: 45 %; Profil pneu vpravo vnútri: 45 %; Profil pneu vpravo vonku: 45 % Hmotnosti Prevádzková hmotnosť: 14 440 kg Nosnosť: 33 560 kg Celková povolená hmotnosť: 48 000 kg Finančné informácie Dksdpfxeycb I Te Ah Den Cena: na vyžiadanie Identifikácia Typové číslo: MCO-48-03V / 2 x ROZŤAHOVACÍ – 27 = Informácie o spoločnosti = VŠETKY CENY SÚ BEZ DPH PRE EXPORT, Joris Versteijnen NL-DE-GB) Wouter Greutink NL-DE-GB-ES-IT) Govorim po ruski Snažíme sa poskytovať presné informácie, avšak z uvedených textov nemožno vyvodzovať žiadne právne nároky.

Stav: použitý, prvá registrácia: 02/2004, farba: iný, Rok výroby: 2004, ŠPZ: QAAB135 Dsdpfx Ahjy Nv T Sj Dekn

Stav: použitý, konfigurácia náprav: 3 nápravy, prvá registrácia: 10/2016, celková dĺžka: 13 210 mm, celková šírka: 2 540 mm, zavesenie: vzduch, Rok výroby: 2016, Doplňujúce informácie: Značka: NOOTEBOOM Model: OSDS-58-04V Konštrukcia: nízkopodlažný náves Rok výroby: 10.2016 Zavesenie: vzduchové Brzdy: bubnové Rozmery: D/Š: 13 210 mm / 2 540 mm Hmotnosti: celková / vlastná: 58 000 kg / 13 120 kg Modelový rok: 2016 Typ zavesenia: vzduchové Brzdy: bubnové Dedpfx Aswzr Hxjh Dskn Zdvihateľná náprava: zdvihateľná náprava Riadenie: riadené = Ďalšie informácie = Zavesenie: vzduchové pruženie Predná náprava: zdvíhacia náprava Zadná náprava: riadená Pohotovostná hmotnosť: 13 120 kg Nosnosť: 44 880 kg Celková hmotnosť: 58 000 kg