Gvn Trailer Náves S Nízkym Nakladacím Zariadením kúpiť použité (63 614)

Stav: nový, pohotovostná hmotnosť: 12 900 kg, maximálna hmotnosť nákladu: 34 100 kg, celková hmotnosť: 47 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 850 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 350 mm, zavesenie: iný, veľkosť pneumatiky: 245/70 R 17,5, farba: sivý, prevádzková hmotnosť: 12 900 kg, Výbava: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading platform length, approx. 3,750 mm - Gooseneck hydraulically liftable/lowerable and removable - Technical fifth wheel load: 23,000 kg - Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4 Loading Platform: - Low bed with external beams, extendable “SUPER LOW” design, approx. 6,850 mm long - Low bed with fixed hardwood floor approx. 40 mm thick and mechanical locking Rear Chassis: - Rear chassis with closed outer frame, chequer plate covering, and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear - 2 pairs of lashing rings foldable outwards - 1 pair of lashing rings mounted flat in the trough - 2 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame Pendulum Axle and Tyres: - “PENDEL-AXLE”, all axles hydromechanically forced-steered - Burst protection valve on the axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pre-inserts for securing in raised position - Axles finished with two layers of single-colour 2K paint in "FAY-Grey-34-0260" - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres 245/70 R 17.5 - TPMS tyre pressure monitoring system according to ECE R 141 Accessories: - Prepared for mounting bolt-on container locks for 1x 20ft or 1x 40ft container on the outer beams - 2" kingpin - Galvanised steel front wall, approx. 400 mm high - One spare wheel - At the galvanised connection rail front, yellow-red air couplings - 4 wheel chocks - Forced steering from front and rear controlled via cable remote control with push buttons, includes single-track monitoring of axles - Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings - Electro-hydraulic power pack - White reflective tape on the sides, the extension, and the rear in accordance with EU regulations - European reflective panels (red-yellow) at the rear of the trailer - Brackets at the gooseneck and rear panel left/right for warning signs, including socket - 6 pairs of threaded blocks between lashing rings under the top flange on the outer beam for mounting bolt-on RUD VLBG-4 rings - Plug-in ALU sidewalls and rear wall on the gooseneck approx. 2,440 x 400 mm - The rear galvanised plug-in stakes are removable (body length approx. 2,560 mm) - Gooseneck rear upper area closed with removable cover - 5 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading platform - Folding widening pieces, approx. 230 mm per side - 2 pairs of bolt-on RUD VLBG-4 M24 rings (LC 8,000 daN) - 1 pair of steel ramps for bridging the low bed towing hook Hedpfx Aishlz R Sspjt - On the loading platform, a coated sand layer as anti-slip protection - 80 km/h speed stickers at the rear and both sides - Rear part of the driving gear’s dipper stick trough covered by a plug-in plate - Four retractable warning boards approx. 423 x 423 mm, extendable by approx. 400 mm - Radio remote control for forced steering, in addition to cable control, with indicator lights on the receiver for axle single-track monitoring - Central lubrication system with 2 BEKAMAX (Pico) pumps using standard NLGI-2 grease - Load gauge for determining axle loads - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible surfaces are metallized with ZINACOR 850 (zinc 85% - alu 15%) and hot-finished

Stav: nový, maximálna hmotnosť nákladu: 38 100 kg, celková hmotnosť: 50 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 100 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 760 mm, zavesenie: vzduch, veľkosť pneumatiky: 205/65 R17.5 3PMSF, farba: sivý, Výbava: ABS, Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading platform: 5 pairs of folding lashing rings on the outside 3 pairs of folding lashing rings on the outside 1 pair of horizontal lashing rings at the front of the loading platform Cutouts in the outer frame of the loading platform for attaching tie-down straps Approx. 48 mm thick hardwood flooring, over the axles with checker plate covering Landing gear: JOST landing legs with 2-speed gearbox for 24 t lifting capacity Axles and tyres: BPW axles, two fixed and two self-steering axles, air suspension, drum brakes, with raise/lower function The self-steering axles can be locked for reversing via electromagnet, activated through reverse gear or manually Axle tools Tyres 205/65 R17.5 3PMSF Braking system: WABCO braking system according to EU regulations with EBS-E Hedpfx Aietphtmepot Steel construction: High-strength fine grain steel frame Steel grades: S355J2+N/S355MC S690QL/S700MC Electrical equipment: Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets Connection in accordance with ISO Paintwork: Premium, durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component zinc dust primer High-quality 2-component top coat, single color in MB 7350 Novagrau Metallic paint not available Rear section metallized and painted in RAL 9010 Standard equipment included: 1 spare wheel 205/65 R 17.5 TPMS tire pressure monitoring system in accordance with ECE R 141 At the galvanized front connection strip: yellow-red air couplings 4 wheel chocks with brackets on the front wall Mounting at the rear of the gooseneck for ALU loading ramps Galvanized folding supports underneath the sloped section of the loading area One bracket for a rotating beacon at the rear of the trailer Height-adjustable curtain structure Galvanized front wall with a tensioning mechanism for the sliding curtains Adjustable height approx. 400 mm "EDSCHA" brand roof, forward-sliding on ALU roof beam profiles, bolted to front and rear walls 3 pairs of sliding stanchions on the loading area The superstructure can be hydraulically extended at the rear left and right by approx. 750 mm Sliding roof with lift-up portal beam Sliding curtain with 700 mm extra length, with tensioning straps approx. every 600 mm Height to top edge of superstructure approx. 3,960 mm Driving with open sliding roof is not permitted and will cause damage to the curtain Hanger bar for ALU loading ramps at the rear of the vehicle On the gooseneck and on the left and right of the rear panel, each with a bracket for warning signs including socket Mudflap at the rear of the trailer European reflective plates at the rear of the trailer 7 pairs of stake pockets for 100 x 50 mm insertable stakes in the outer frame of the loading platform Lifting axle on the front axle controlled by TEBS E depending on current axle load and loading condition Superstructure at the rear with closed ALU swing doors On the checker plate on the gooseneck and loading area, an integrated sand coating to prevent slipping Central lubrication system BEKAMAX with standard grease NLGI-2 and removable pump guard 80 km/h speed stickers at the rear and on both sides Load gauge for axle load determination including load diagram

Stav: nový, pohotovostná hmotnosť: 15 450 kg, maximálna hmotnosť nákladu: 65 550 kg, celková hmotnosť: 80 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 21 900 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 925 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17.5, farba: sivý, Výbava: ABS, Gooseneck: Gooseneck in SNT design to optimize the loading area length, approximately 3,700 mm long, rear with a bevel of approx. 1,000 mm x 10°. Technical fifth wheel load: 30,000 kg. Suitable for tractor units: 4x2, 6x2, and 6x4. Loading area: Loading area in double-extendable design, approx. 8,800 mm long with a rear bevel of approx. 500 mm x 10°. The central beam features a support table approx. 300 mm wide with long holes at the front and rear for the attachment and repositioning of optional bridging elements, welded in place. Pneumatic locking mechanism with conical locking bolts and reinforced locking positions, the supply lines are safely routed within the extendable beams and automatically adjust to the respective platform length. Axles and tyres: BPW axles and suspension, first axle steered ahead, all other axles hydro-mechanically forced-steered. First axle with electromagnetically actuated reverse lock via reverse gear and manual activation. Technical axle load: 12,000 kg. Air suspension with raise and lower valve. Manufacturer at our discretion. Sockets and lighting: 24-volt lighting system in accordance with EU regulations. ASPÖCK-UNIBOX at the front connection rail with 24N, 24S & 15-pin sockets. Complete HRM metallisation. Complete steel construction shot-blasted, then finished with ZINACOR 850 hot-dip coating. Painting: 6-stage final treatment: Entire steel structure shot-blasted post-welding. One coat zinc-based primer, one coat adhesion primer. Final coating with two coats of 2-component paint, single-tone in DB 7350 Novagrau, followed by sealing of cavities with special wax. Accessories: Detachable steel front wall, approx. 400 mm high. Supply line connection rail to tractor unit mounted at height of outer frame profile. ASPÖCK-UNIBOX at front connection rail with 24N, 24S & 15-pin sockets. Should your pin assignment differ from ISO connector standard, please inform us. 3 kW electric-hydraulic unit to operate hydraulic functions (excluding hydraulic winches). On the gooseneck: one pair of detachable ALU side walls, approx. 400 mm high, anodised finish. 3.5" king pin. Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide. 2 wheel chocks with holders in front of the front wall. Mechanical landing gear with 2-speed gearbox and hand crank. Control valves for hydraulic ramps on the right side of the vehicle. One pair of mechanical rear supports. Central lubrication system with 1 pump, BEKAMAX brand, standard grease per NLGI-2. Removable protector for the central lubrication pump(s). Remote axle steering from front and rear via cable remote control with push buttons, featuring axle alignment monitoring, without installation in tractor unit. Below gooseneck and at the end cross member, one 7-pin socket with warning sign holder each on left and right. One 7-pin socket at the end cross member. User manual and documentation included. Single-piece INOX toolbox, approx. 2,480 x 340 x 390 mm, straight design. Hedsrigw Repfx Aipst Please note: Special equipment and accessories may increase curb weight and thus reduce payload accordingly. Warning package: 4 warning signs, approx. 423 x 423 mm, extendable by approx. 1,000 mm, incl. 2 LED position lights and brackets for beacon.

Stav: nový, pohotovostná hmotnosť: 34 500 kg, maximálna hmotnosť nákladu: 106 700 kg, celková hmotnosť: 141 200 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 7 150 mm, šírka ložného priestoru: 2 850 mm, výška ložného priestoru: 580 mm, veľkosť pneumatiky: 285/70 R19.5, farba: sivý, prevádzková hmotnosť: 34 500 kg, Výbava: ABS, Gooseneck: - Gooseneck hydraulically liftable/lowerable and detachable - Length approx. 3,650 mm - Extensive lashing positions - For tractor units: 6 x 4 or 8 x 4 3-Axle Compact Front Undercarriage: - Hook mountings at front and rear - Undercarriage length x width approx. 3,560 mm x 2,850 mm - Extensive lashing positions Excavator Deck “BB-A”: - Telescopic excavator deck “BB-A” with drive-over deck hooks at the front and pin-lug coupling at the rear - Length x base width approx. 7,150 mm x 2,850 mm - Beam height x width approx. 430 mm x 1,350 mm - Loading height 580 mm with ground clearance of 150 mm - 5 pairs of hanging lashing rings (LC 10,600 daN) - 4 pairs of M30 threaded blocks on the inner beam for mounting screwable rings 5-Axle Rear Undercarriage: - Mechanical pin-lug coupling at the front for low bed attachment; end cross-member at the rear - Undercarriage length x width approx. 6,840 mm x 2,850 mm - Extensive lashing positions Pendulum Axle and Tyres (front and rear undercarriage): - "PENDULUM AXLE", all axles hydro-mechanically forced steered - Hose rupture valve on axle balancing cylinders with automatic RESET function - Hydraulic cylinders fitted with shut-off taps and locking plugs for securing in raised position - Final coating of axles with two layers of 2K paint, single color MB 7350 Novagrau - Technical axle load: 14,640 kg (62 km/h) - Hydraulic axle compensation - Axle tools - Tyres: 285/70 R19.5 Hedpfx Ajwhywfeipjt Remote Steering (Follow-up Steering): - Remote steering from front and rear operable via cable remote control with push buttons, with axle tracking monitoring - Socket for remote steering operation at the gooseneck - Cable remote control with push buttons including axle tracking monitoring Accessories included: - Yellow-red air couplings on galvanized front connection rail - Steel front wall approx. 400 mm high - 4 wheel chocks with holders - 2 spare wheels 285/70 R19.5 - 3.5" king pin - Boom with winch for spare wheel at gooseneck front - Truck hydraulic connection with flow regulator (40 l/min), including boom for suspending service lines; tractor unit tank must have at least 80 liters capacity with connectors - White reflective tape according to EU regulations on the sides and on the extension, red at the rear - Plug-in ALU side boards and tailgate on the gooseneck, approx. 400 mm high, anodized - Control levers on the gooseneck protected by a foldable cover - Separate air connection with air gun at the gooseneck - Central lubrication system BEKAMAX with standard grease NLGI-2, 1x at the gooseneck, 1x at the 3-axle undercarriage, 1x at the 5-axle undercarriage - Variomax tool kit - Multi-coupling hydraulic connections at low bed hook area - Front undercarriage with separate air connection for pneumatic tools - Threaded insert option (ø 40 mm) every approx. 500 mm on the outer web of the excavator deck for screw rings - Foldable width extensions with steel inlays, adjustable from approx. 2,850 mm to 3,250 mm - Steel inlays with approx. 12 mm thick rubber covering - Two INOX toolboxes 855 x 340 x 390 mm - Radio remote control for steering in addition to cable remote control - Sand layer coating as anti-slip protection - 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery

Stav: nový, pohotovostná hmotnosť: 8 490 kg, maximálna hmotnosť nákladu: 40 510 kg, celková hmotnosť: 49 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 200 mm, šírka ložného priestoru: 2 550 mm, veľkosť pneumatiky: 245/70 R 17,5, farba: sivý, prevádzková hmotnosť: 8 490 kg, Výbava: ABS, Chassis: - Robust steel frame construction with front frame offset and flat loading platform with rear taper approx. 500x100 mm - Neck height 200 mm with chamfered corners - Sloping gooseneck end approx. 500 x 100 mm (traction ribs on the outer frame in the area of the rear taper) - 2 king pin positions with interchangeable 2" king pin - Outer frame closed to the outside as a perforated outer frame for lashing with tension straps - Reinforced frame design / point load at center of gravity - Preparations for extendable width extensions in the loading area - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting roughly after 2nd axle to the end of the vehicle - 1 pair of wheel recesses in front of the axle with steel covers - (Covers with Körapur coating), depth approx. 400 mm, and 1 pair of wheel recesses between 1st and 2nd axle with steel covers - Side underrun protection = extended end plate - Drop-down supports at the rear Floor: - 35 mm larch wooden floor with aluminum omega profiles Axles, Steering and Tires: - BPW air suspension axles, each with 10 t axle load, bellows diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - Lifting and lowering device with total lift approx. 200 mm - 2nd driving position via ball valve +50 mm - 1st axle lift axle (wired via EBS), automatic activation, with mechanical emergency operation via push button on the trailer - 3rd axle as friction-steered trailing axle with electrical and mechanical lock - 12 steel disc wheels, 10-hole, hub-centered - 12 tires 245/70 R 17.5 143/141J, tubeless Hedpfxswu A Slj Aipet - Includes tire pressure monitoring system Brake System: - Two-line brake system with EBS-E including RSS - EBS (WABCO 4S3M) - Spring-loaded parking brake - Pneumatic connections yellow/red Painting: - Steel shot blasting, spray galvanizing of chassis and priming - Painting of chassis/wheel hubs/outer frame in DB 7350 Novagrau Accessories: - Removable side and rear walls on the gooseneck, approx. 400 mm high - Spare wheel holder - Side aluminum underrun protection - 4 wheel chocks - Steel mudguards with Clear-Pass - Long license plate holder in end plate - 1 plug-in ECE plate at the rear - 11 pairs of ZK modules 10t on the side: - 2x on the gooseneck - 9x on the loading platform - Without rear towing eyes - Extending warning signs incl. 3 position lights each, front at landing gear and rear in front of end plate, infinitely extendable to a loading width of 4,500 mm - 4 holders for warning signs for plugging into stake pockets on the loading platform - 6 pairs of stake pockets at the side for plug-in stakes 100x50 mm - 2 transverse rows of stake pockets for plug-in stakes 100x50 mm on the gooseneck from outer frame inward to main frame (1x in front of and 1x behind the king pin positions) - 3 transverse rows of stake pockets for plug-in stakes 100x50 mm on the loading platform from outer frame inward to main frame (1x in the front area, 1x before 1st axle and 1x after 3rd axle) - 2 pairs of steel plates in the loading area for container locks to accommodate 1x 20ft container - Rubber skirt mounted on underrun protection - Preparation (=cable routing for NATO cable and hole pattern for later installation of NATO socket at the front of the end plate as well as bracket on the vehicle) for retrofitting an electro-hydraulic unit at the rear right for possible operation of drive-on ramps - Mechanical 24 t landing legs with single-side op

Stav: nový, pohotovostná hmotnosť: 10 600 kg, maximálna hmotnosť nákladu: 39 400 kg, celková hmotnosť: 50 960 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 760 mm, zavesenie: vzduch, veľkosť pneumatiky: 205/65 R17.5, farba: sivý, prevádzková hmotnosť: 10 600 kg, Výbava: ABS, Gooseneck: - Gooseneck with 30 mm hardwood floor - Gooseneck in straight design at the rear - 3 pairs of lashing rings (LC 5,000 daN) Extendable loading area: - Loading area in extendable version - 5 pairs of lashing rings foldable outwards - 3 pairs of lashing rings foldable outwards - 1 pair of lashing rings laid flat at the front of the loading area - Cut-outs in the outer frame of the loading area for attaching tension belts - Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering Landing legs: - JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and tyres: - BPW axles, two rigid, two trailing steering axles - Air suspension, with drum brakes, with lifting/lowering function - The trailing steering axles with electro-magnetic reversing lock, can be activated either via reverse gear or manually - Axle tools - Tyres 205/65 R17.5 Brake system: - Brake system in accordance with EU regulations with EBS-E (4S3M) Steel construction: Hedpfxet Ag Uws Aipot - Steel construction made of high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system in accordance with EU regulations, 24-volt lighting, ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets - Connections according to ISO: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Paintwork: - First-class and long-lasting corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) top coat, single-colour in Novagrau - Rear section metalized and painted in RAL 9010 (pure white) Included accessories: - One spare wheel with holder in front of the front wall - 2" kingpin - Galvanized steel front wall approximately 400 mm high - Yellow-red air couplings on the galvanized connection bar at the front - 4 wheel chocks with holders on the front wall - Galvanized folding supports under the sloped loading area - Bracket for a revolving beacon at the rear of the trailer - Galvanized, extendable width approx. 230 mm per side - White reflective tape to EU regulations on the side, at the extension, and red at the rear - At the gooseneck and on the rear plate, left and right, one bracket for warning signs each, including socket - European reflective warning plates (red-yellow) at the rear of the trailer - TPMS tyre pressure monitoring system according to ECE R 141 - On the gooseneck, plug-in aluminium side and rear panels approx. 2,440 x 400 mm - The rear, galvanized plug-in stakes are removable, length of the structure approx. 2,560 mm - 7 pairs of WADER container locks - 1x 20ft container on the loading area; 1x 40ft container on the loading area; 1x 40ft container above the gooseneck; 2x 20ft containers - 7 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area - Lift axle at the front axle controlled by TEBS E, depending on current axle load and load condition - Movable hanging bar for aluminium approach ramps at the rear of the vehicle - On checker plates on the gooseneck and loading area, a painted-in sand layer as anti-slip protection - Four warning signs each extendable by approx. 400 mm, size approx. 423 x 423 mm, with position light - On warning signs, bracket for rotating beacon - 80 km/h speed stickers on the rear and both sides - Load manometer for determining axle l

Stav: nový, pohotovostná hmotnosť: 9 300 kg, maximálna hmotnosť nákladu: 38 700 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 1 200 mm, zavesenie: vzduch, veľkosť pneumatiky: 385/65 R 22,5, farba: sivo-čierny, Výbava: ABS, Ložná plocha: • Výsuvná ložná plocha s pneumaticky ovládaným uzávěrem • Ložná plocha s cca 30 mm silnou podlahou z dřevěného masivu • 7 párů vyklápěcích vázacích ok směrem ven (LC 5 000 daN) • 3 páry vyklápěcích vázacích ok směrem ven (LC 10 000 daN) • Výřezy ve vnějším rámu ložné plochy pro zavěšení upínacích pásů (LC 2 000 daN) Nápravy a pneumatika: • Nápravy BPW a odpružení, všechny nápravy hydro-mechanicky nuceně řízené • Se kotoučovými brzdami • Technické zatížení nápravy: 10 000 kg • Vzduchové odpružení s ventilem pro zvedání a spouštění • Nářadí pro nápravy • Pneumatiky: 385/65 R 22,5 • Systém kontroly tlaku v pneumatikách TPMS dle ECE R 141 Brzdový systém: • Brzdový systém WABCO dle předpisů EU s EBS-E (2S2M) Elektrické zařízení: • Elektrická instalace dle předpisů EU, osvětlení 24 V ASPÖCK-NORDIK (ASS3) • ASPÖCK-UNIBOX na připojovací liště vpředu se zásuvkami 24N, 24S & 15-pin • Připojení dle ISO • 24N ISO-1185 • 24S ISO-3731 • 15-pin ISO-12098 Hodpfx Aijiu Etrepot Příslušenství v ceně: • Řízení zadní nápravy zepředu a zezadu pomocí kabelového dálkového ovládání s tlačítky, s kontrolou jedné stopy náprav • 4x zajišťovací klíny s držákem na čelní stěně • 2" královský čep • 1x pozinkovaná čelní stěna z oceli, cca 1 600 mm vysoká • Na pozinkované připojovací liště vpředu žluto-červené vzduchové spojky • Bílé reflektorové pásky dle EU na bocích, výsuvu a vzadu na návěsu v červené barvě • Evropské reflektorové štítky (červeno-žluté) vzadu na návěsu • 1x zástěrka vzadu na návěsu • Návod k obsluze a popis • Držák pro výstražné světlo vzadu na návěsu • Ložná plocha s cca 30 mm silnou dřevěnou podlahou zakrytá Omega-profily • 10 párů kapes na sloupky pro zasouvací sloupky 100 x 50 mm ve vnějším rámu ložné plochy • 1x držák rezervního kola pod ložnou plochou vpravo ve směru jízdy • Elektrohydraulická jednotka • Na labutím krku a zadní části vlevo i vpravo držák výstražných štítů včetně zásuvky • Na centrálním nosníku lakovaná vrstva písku jako ochrana proti smyku • 6 párů kontejnerových kapes WADER v ložné ploše, pro 1x 20ft, 2x 20ft nebo 1x 40ft kontejner, u výsuvu další uzamykací bod pro 45ft kontejner • 4 páry příčných kapes pro sloupky 100 x 50 mm v ložné ploše • Montovaná nástupní žebřík vpravo ve směru jízdy • 1x box na nářadí z HDPE cca 1 200 x 500 x 480 mm vpředu pod ložnou plochou vlevo ve směru jízdy • Centrální mazací zařízení BEKAMAX (Pico) s odnímatelným krytem čerpadla • Zvedací náprava na přední nápravě s ovládáním přes TEBS E v závislosti na aktuálním zatížení nápravy a stavu naložení • Bezdrátové dálkové ovládání pro řízení náprav navíc ke kabelovému ovládání, s kontrolkami na přijímači pro kontrolu jedné stopy • Čtyři výsuvné výstražné tabule cca 400 mm, cca 423 x 423 mm s pozičním světlometem • Na výstražných tabulích držák pro výstražné světlo • Nálepky s omezením rychlosti 80 km/h vzadu a na obou stranách • Manometr pro měření zatížení náprav včetně zatěžovacího diagramu • Metalizace HRM (High Resistance Metallisation) vnějšího rámu • Celá ocelová konstrukce tryskána, poté definované viditelné plochy metalizované a žárově upraveny ZINACOR 850 (zinek 85 % - hliník 15 %)

Stav: nový, pohotovostná hmotnosť: 22 700 kg, maximálna hmotnosť nákladu: 79 300 kg, celková hmotnosť: 102 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 11 000 mm, šírka ložného priestoru: 2 850 mm, výška ložného priestoru: 920 mm, veľkosť pneumatiky: 245/70 R 17.5, farba: sivý, prevádzková hmotnosť: 22 700 kg, Výbava: ABS, Swan neck: - Swan neck in SNT design for optimizing the loading platform length, approx. 3,750 mm long, with rear chamfer approx. 850 mm x 10° - Hydraulically raisable and lowerable, lifting stroke ± 250 mm including hydraulic connection linked to the hydraulic axle compensation of the first two axles - Open at the rear third - Suitable for tractor units: 6 x 4 and 8 x 4 Loading platform: - Extendable loading platform, approx. 11,000 mm long with rear chamfer approx. 500 mm x 10°. - Recess in the loading platform including in the bevel for accommodating the excavator bucket arm, approx. 4,240 x 900 x 440 mm - Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the respective platform length Ramps: - Pair of two-part steel ramps, approx. 4,650 mm long and 900 mm wide - Hydraulically foldable ramp tips - Ramps hydraulically adjustable sideways approx. 235 mm outward and approx. 215 mm inward, individually - "Super Grip" rubber surface 25 mm and steel plate approx. 5 mm as additional reinforcement on the loading platform bevel - Rectangular climbing strips 20x30 mm, approx. every 200 mm on the outer ramp frame Axles, suspension and tyres: - PA-X axle system, all axles force-steered hydro-mechanically - Steering behavior of the first two axles can be optimally adjusted to the loading platform length, both mechanically and hydraulically - Hose rupture valve on the axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pins for securing in raised position - 245/70 R 17.5 3PMSF Accessories included: - Removable steel front wall, approx. 400 mm high - Supply line connection strip for tractor unit, mounted at the height of the outer frame profile - 1 spare wheel - Outer beams of the swan neck with mounting holes for screwable lashing rings - First hole approx. 200 mm from front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - Tread plate covering over the swan neck - On the swan neck, 1 pair of removable ALU side walls, approx. 400 mm high, anodized - Removable ALU rear wall on the swan neck, approx. 400 mm high, anodized - 3.5" king pin / 2" king pin mounted - Guide plate on the swan neck for the fifth wheel, approx. 500 mm wide - 4 wheel chocks - 4 axle load gauges - Mechanical drop supports at the front - 1-piece INOX toolbox, approx. 2,480 x 340 x 390 mm - Mechanical drop supports at the front - Continuous steel plate covering on the loading platform with painted-on sand layer as slip protection - 1 intermediate table, approx. 500 mm wide, for extension, with elongated holes for insertable and repositionable bridging elements - Painted-on sand coating on the support surfaces of the intermediate table - Mechanical lock for locking the intermediate table when extended - 8 pairs of stake pockets in the outer frame - Extendable galvanized widening sections, approx. 230 mm per side - 1 pair of hydraulic rear supports - Central lubrication system - 1 reversing spotlight each on the left and right at the rear of the vehicle - 3 kW electric-hydraulic power unit - Loose widening planks in reinforced steel U-profile frame - Radio and cable remote control Hodpfx Aijk Af Svspst - 4 warning signs, approx. 423 x 423 mm

Stav: nový, maximálna hmotnosť nákladu: 38 800 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5 3PMSF, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck with chamfered front corners at 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable loading platform: - Extendable loading platform with rear chamfer approx. 1,000 mm x 8° - 6 pairs of outward-folding lashing rings (LC 5,000 daN) - 3 pairs of outward-folding lashing rings (LC 10,000 daN) - 1 pair of flat-mounted lashing rings at the front of the loading area (LC 10,000 daN) - Cut-outs in the outer frame of the loading platform for securing straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, over the axles with anti-slip chequer plate Axles and tires: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lowering valve - Axle tools - 235/75 R 17.5 3PMSF Hodpfxeuqlmne Aipjt Brake system: - WABCO brake system according to EU regulations with EBS-E (2S2M) Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox, 24t lifting capacity (50t test load) Included accessories: - One spare wheel with holder in front of the bulkhead - 2-inch king pin - Galvanized steel bulkhead, approx. 400 mm high - Yellow and red air couplings on the galvanized front connector strip - 4 wheel chocks with holders at the bulkhead - Mount for rotating beacon at the rear of the trailer - Receptacle at the rear of the gooseneck for ALU approach ramps - Galvanized folding supports under the chamfer of the loading platform - Cover plates for bridging the gap between ramps and platform - White reflective tape according to EU regulations on sides, extension, and red at the rear - Electro-hydraulic unit positioned at the rear, under the platform - On the gooseneck and ramps, left and right, mounts for warning signs including power socket - Control valves for the ramps installed on the right side of the trailer - One mud flap at the rear of the trailer - User manual and documentation on USB stick - ALU side walls and rear wall approx. 2,440 x 400 mm on the gooseneck - The rear, galvanized plug-in stanchions are removable (structure length approx. 2,560 mm) - Four extendable warning signs approx. 423 x 423 mm with position light, extendable by approx. 400 mm - 3 pairs of WADER container pockets in the platform suitable for a 20ft, 30ft, or 40ft container - 6 pairs of 100x50 mm stanchion pockets in the external frame of the loading platform - Galvanized side extensions, extendable by approx. 230 mm per side - 20 x 20 mm square lashing rails every 200 mm on the external frame of the platform's chamfer - Anti-slip sand coating, painted on chequer plates above the king pin and on the loading platform - Mount for rotating beacon on warning signs - European reflective boards (red-yellow) at the rear of the trailer - 80 km/h speed stickers at the rear and both sides - Load manometer for axle load measurement including load diagram - HRM metallization (High Resistance Metallisation) of the external frame - Complete steel structure shot-blasted, then all defined visible surfaces hot-metal sprayed with ZINACOR 850 (zinc 85% - aluminum 15%)

Stav: nový, pohotovostná hmotnosť: 7 900 kg, maximálna hmotnosť nákladu: 41 600 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, prevádzková hmotnosť: 7 900 kg, Výbava: ABS, Gooseneck: - Gooseneck with rear taper approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Loading Platform: - Loading platform with rear taper approx. 1,000 mm x 8° - Recess in the sloped section and extending into the loading platform for the excavator bucket stick, approx. 2,900 x 750 x 210/290 mm - Cut-outs in the outer frame of the loading platform for attaching tensioning straps - Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and Tyres: - BPW axles and suspension, 2 fixed axles, 1 trailing-steer axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated by reverse gear and manually - Air suspension with lift and lower valve - TPMS tyre pressure monitoring system according to ECE R 141 - Tyres 235/75 R 17.5 Paintwork: - Complete steel structure automatically shot-blasted after welding with turbine blasting unit - Second blast treatment with corundum for optimal adhesion of the coating system - Final coating with 2 coats of 2K topcoat, single colour in RAL MB 7350 Novagrau Hjdsunrapspfx Aipet - Rims painted silver - Rear section metallised and painted in RAL 9010 (Pure White) - Cavities sealed with special wax Electrical System: - Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX on the front connector strip with sockets: 2x 7-pin & 1x 15-pin Included Accessories: - Extensive lashing positions - 2" king pin - One galvanised steel front wall approx. 400 mm high - Yellow-red air couplings on the galvanised front connector strip - 4 wheel chocks with holder on the front wall - Mounting at the rear of the gooseneck for ALU loading ramps - Galvanised folding supports under the sloped rear section of the loading platform - A holder for a beacon at the rear of the trailer - Galvanised, extendable side extensions approx. 230 mm each side - White reflective tape on the sides and red on the rear in accordance with EU regulations - At the gooseneck and rear plate, left and right, each with a holder for warning plates including socket - On the gooseneck, plug-in ALU side and rear boards approx. 2,440 x 400 mm - The rear, galvanised stakes are removable - 2 pairs of WADER container locks in the loading platform for a 20 ft container - 6 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the loading platform - Sliding mounting rail for ALU loading ramps at the rear of the vehicle - 20 x 20 mm square climbing strips every 200 mm on the outer frame of the sloped section of the loading platform - Painted-on sand coating as anti-slip protection on the checker plates of the gooseneck and the loading platform - Four warning plates extendable by approx. 400 mm, approx. 423 x 423 mm each, with position light - Holder for beacon on the warning plates - 80 km/h speed stickers on the rear and on both sides - European reflective panels (red-yellow) at the rear of the trailer - Manual and documentation on USB stick - HRM metallisation (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then the defined visible areas are hot-finished with ZINACOR 850 metallisation (zinc 85% - aluminium 15%)

Stav: nový, pohotovostná hmotnosť: 12 800 kg, maximálna hmotnosť nákladu: 36 200 kg, celková hmotnosť: 49 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 850 mm, šírka ložného priestoru: 2 550 mm, výška ložného priestoru: 375 mm, veľkosť pneumatiky: 245/70 R 17.5, farba: sivý, prevádzková hmotnosť: 12 800 kg, Výbava: ABS, Gooseneck: - Gooseneck in SNT design to optimize loading platform length, length approx. 3,750 mm - Gooseneck hydraulically raisable/lowerable and detachable - Technical fifth wheel load: 25,000 kg - For tractor units: 4 x 2, 6 x 2, and 6 x 4 Loading Platform: - Low bed with external beams, designed as a telescopic vessel bridge in low-profile construction with front extension - Length 6,850 mm x width 2,540 mm - One locking position approx. every 1,000 mm on the extension Rear Chassis: - Rear chassis with closed outer frame, checker plate cover, and continuous prismatic excavator trough approx. 1,250/700 x 505 mm, open at the rear Axles, Suspension, and Tyres: - "PENDLE-AXLE", all axles hydro-mechanically forced-steered - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and locking pin for securing in lifted position - Axles finished with 2 coats of 2K acrylic paint, single color in "FAY-Grey-34-0260" - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres 245/70 R 17.5 - TPMS tire pressure monitoring system according to ECE R 14 - TPMS tire pressure sensors mounted in all wheels including spare wheels Accessories included: - Plug-in front wall made of steel, approx. 400 mm high - 3 kW electro-hydraulic unit for controlling hydraulic functions, except hydraulic winches - One spare wheel with mounting adapter - Outer beams on gooseneck with mounting holes for bolted lashing rings - Detachable ALU side walls on gooseneck, approx. 400 mm high, anodized - Detachable ALU rear wall on gooseneck, approx. 400 mm high, anodized - Checker plate cover above the gooseneck - Guide plate on gooseneck for the fifth wheel plate, approx. 500 mm wide - Operating area on gooseneck illuminated with on/off switch - Hydraulic crossbeam to support the gooseneck on the tractor unit or a dolly Hodpsvy Edcsfx Aipjt - 2" king pin - Anti-slip stickers on the left chamfer of the gooseneck - Rear upper part of the gooseneck closed with a removable cover - 4 wheel chocks with holders - Hydraulic connections from gooseneck to low bed with multi-coupling instead of screw couplings - 1 pair of steel ramps with climbing strips and mounting bolts for bridging the mounting hooks of the low bed - Ramps can be placed over or between the hooks - Mounting provision for steel ramps at the rear between the outer beams of the gooseneck - Prepared to accommodate bolt-on container mounts for 1x20ft on the outer beams - Mechanical pin-lug coupling from low bed to chassis for exchange of loading platform or installation of extension beams - With electro-pneumatic-hydraulic couplings - Outer beams of the low bed with integrally painted anti-slip sand layer - Removable (galvanized) loading floor in 3 sections insertable between outer beams with hardwood covering - Folding wideners, approx. 230 mm per side - Hanging bar at the front of the rear chassis for loose drive-on ramps for the low bed - 2 pairs of stake pockets recessed in the outer frame of the chassis, for plug-in stakes approx. 100 x 50 mm - Hanging bar for loose ALU ramps on the rear cross member of the vehicle - Central lubrication system with 2 pumps - Radio and cable remote control - 4 warning signs, approx. 423 mm x 423 mm, extendable - Extensive lashing positions

Stav: použitý, pohotovostná hmotnosť: 10 900 kg, maximálna hmotnosť nákladu: 43 600 kg, celková hmotnosť: 54 500 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 04/2025, dĺžka ložného priestoru: 8 700 mm, šírka ložného priestoru: 2 550 mm, výška ložného priestoru: 855 mm, veľkosť pneumatiky: 245/70 r17.5, farba: sivý, Rok výroby: 2025, prevádzková hmotnosť: 10 900 kg, Výbava: ABS, Gooseneck, rigid, in central tube design: - Enclosed outer frame with cutouts for lashing straps (LC 1,500 daN) - Steel flooring with anti-slip coating - Including perforated rail for aluminum approach ramps - 2" king pin - Mechanically operated BPW landing gear - 550 mm long, 8° bevel at the rear end of the gooseneck - Front bulkhead including stowage position for rear wall, 400 mm high - Spare wheel holder mounted upright at the front of the gooseneck - 3 pairs of recessed lashing rings LC 5,000 daN on the gooseneck deck - Aluminum drop-in sideboards, 400 mm high, consisting of 2x sideboards (length 3,150 mm) and rear board with stanchions (galvanized) - Rectangular storage box, aluminum, with folding lid and lockable, approx. 400 x 800 mm, centrally mounted - Storage box 45’, aluminum, with folding lid and lockable, approx. 400 x 800 mm, left side - Storage box 45’, aluminum, with folding lid and lockable, approx. 400 x 800 mm, right side Load platform, single telescoping: - Enclosed outer frame with cutouts for lashing straps (LC 1,500 daN) - Fixed section at front 700 mm - Steel tread plate with anti-slip coating - Beveled transition between fixed section and load platform for attaching bridging rails and wheel recesses - Excavator recess including elongated holes for load securing (LC 1,500 daN), approx. 3,850 mm long - Prepared for hydraulic ramp (electric supply fitted) - Beams for extension to 3,000 mm width - Beveled vehicle rear, 8°, 550 mm long - Sled-type design for easy mounting and removal of ramps - Continuous rear mudflap - 1 pair of lashing points LC 10,000 daN centrally on the platform behind the gooseneck - 7 pairs of lashing points LC 10,000 daN on outer frame of the platform - 6 pairs of stake pockets 100 x 50 mm on the outer frame of the platform - 1 pair of lashing points LC 10,000 daN centrally at the rear of the platform - 1 pair of stake pocket rails approx. in the middle of the platform - 1 pair of stake pocket rails on the fixed section - 1 pair of stake pocket rails behind the last axle Ramps: - Hydraulic twin-fold ramps, 2,750+1,500x800 mm - Larch timber decking - Operated via remote control (either wired or wireless) - Ramps with quick-change (removal system) Chassis: - BPW ECO Max axle make - 2 ride heights - 4 axles, each 10 t (technically 12 t) - Twin tires 245/70 R17.5 - 2 rigid axles and 2 friction-steered axles - Reverse steering lock for friction-steered axles via reverse gear - Brake system make Knorr (in accordance with EU directives with EBS-E) - TIM G2 by Knorr (Trailer Information Module) - RSS (Roll Stability Support) - Load-dependent lift axle on the first axle including starting aid (forced lowering of lift axle via TIM possible) Hedpfxoi Ai E Rj Aipot Accessories: - 4 wheel chocks with holder - 2 pairs of warning boards 423 mm x 423 mm, with 2 marker lights and mounting position for beacon, continuously adjustable up to 3,950 mm - Mounting options on gooseneck and platform (alternatively on ramp, if present) are included - Insertable bulkhead at the end of the excavator recess - Electro-hydraulic unit for ramp operation - Wireless remote control for ramp operation - Hydraulic stabilizer legs at vehicle rear for support during loading - 1 pair of additional reversing lights at the rear, activated with reverse gear - Larch wood extension beams (option)

Stav: nový, pohotovostná hmotnosť: 10 350 kg, maximálna hmotnosť nákladu: 39 150 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Výbava: ABS, Swan neck: - Swan neck with rear bevel approx. 750 mm x 10° Hjdpeiu Er Aefx Aipst - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood floor, 30 mm thick Loading area: - Telescopic loading platform with rear bevel, approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm - Wheel recesses with square climbing bars 15 x 15 mm and widened sections at the bottom - Between 1st and 2nd axle: 1 pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm - 3-part removable galvanized covers over the wheel recesses (W 670 mm) – max. point load 5 t each - Recess in the rear bevel as well as into the loading area for excavator bucket stick storage, approx. 2,900 x 750 x 210/290 mm - 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN) - 5 pairs of outward-folding lashing rings (LC 5,000 daN) - 2 pairs of outward-folding lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) - Cutouts in the outer frame of the platform for attaching tie-down straps (LC 2,000 daN) One-piece ALU ramps: - One pair of one-piece ALU ramps approx. 2,500 x 600 mm - Ramp with spring lifting mechanism, manually adjustable - Maximum load per pair: 24,000 kg Axles and tires: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated automatically via reverse gear and manually - Air suspension with lift and lower valve - Axle tools - Tires 235/75 R 17.5 - TPMS tire pressure monitoring system according to ECE R 141 Accessories included: - 1 spare wheel with holder in front of the headboard - 2-inch king pin - 1 galvanized steel headboard, approx. 400 mm high - Yellow-red air couplings to the galvanized connection rail at the front - 4 wheel chocks with holders on headboard - ALU ramp storage at the rear of the swan neck - Galvanized extendable width extensions, extendable by approx. 230 mm per side - Galvanized folding supports under rear bevel of loading area - 1 beacon mounting bracket at trailer rear - White reflector tape according to EU regulations on the sides; red on extension and rear - Swan neck and rear panel each with 1 holder for warning signs incl. socket, left and right - On swan neck: ALU drop-in side panels and rear panel, approx. 2,440 x 400 mm - The rear galvanized drop-in stakes are removable (superstructure length approx. 2,560 mm) - 2 pairs of WADER container pockets in platform for one 20ft or 30ft container - 3 pairs of stake pockets 100 x 50 mm in outer frame of platform - 1 removable galvanized intermediate table with 1 pair of WADER container pockets - Square climbing bars 20 x 20 mm every 200 mm on the outer frame at platform's rear bevel - Anti-slip sand finish painted onto tread plates on swan neck and loading area - Four extendable warning signs approx. 423 x 423 mm, extendable by approx. 400 mm, each with position light - Warning signs equipped with bracket for beacon - 80 km/h speed stickers on rear and both sides - Load pressure gauge for axle load determination including load chart - HRM metallization (High Resistance Metallisation) of outer frame - Complete steel structure shot-blasted, then all defined visible areas metallized with ZINACOR 850 (zinc 85% - alu 15%) via hot finishing

Stav: nový, pohotovostná hmotnosť: 14 800 kg, maximálna hmotnosť nákladu: 61 700 kg, celková hmotnosť: 76 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 900 mm, veľkosť pneumatiky: 235/75/r17,5, farba: sivý, Výbava: ABS, Gooseneck: • Gooseneck with rear bevel approx. 750 mm x 10° • 3 pairs of lashing rings • 30 mm thick hardwood flooring Loading Platform: • Extendable loading platform with rear bevel approx. 500 mm x 8° • 9 pairs of exterior folding lashing rings • 1 pair of flat-mounted lashing rings at the front of the loading platform • Cutouts in the external frame of the loading platform for attaching tensioning straps • Approx. 48 mm thick hardwood flooring, over the axles with checker plate covering Landing Legs: • JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: • BPW axles and suspension, 1st axle self-steering, 2nd and 3rd axle fixed, 4th and 5th axle trailing-steer • Technical axle load: 12,000 kg • 1st, 4th, and 5th axle with electro-magnetic reverse lock, activated by reverse gear and manually • Tyres 235/75 R 17.5 3PMSF Brake System: • WABCO braking system according to EU standards with EBS-E (4S3M) Painting: • Top-quality and durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc-rich primer Hodpfx Aijma Hf Rjpst • High-quality, single-colour 2-component (2K) topcoat in MB 7350 Novagrau • Rear section metallised and painted in RAL 9010 (Pure White) Steel Construction: • Steel construction made from high-strength fine-grained steels • Steel grades: • S355J2+N/S355MC (yield strength 355MPa) • S690QL/S700MC (yield strength 690MPa) Accessories: • One spare wheel with holder in front of the bulkhead • 2'' kingpin • Galvanised steel front wall, approx. 400 mm high • Yellow-red air couplings on the galvanised connection strip at the front • 2 wheel chocks with holder at the front wall • Receptacle at rear section of the gooseneck for ALU loading ramps • Galvanised, extendable widenings approx. 230 mm per side • Bracket for a beacon at the rear of the trailer • Galvanised supports under the rear bevel of the loading platform • White reflector tape according to EU standards at the sides, on the extension and red at the rear • Holders for warning signs incl. socket on both sides of the gooseneck and rear panel • Removable ALU side panels and rear board approx. 2,440 x 400 mm on the gooseneck • Removable rear galvanised stanchions (body length approx. 2,560 mm) • 3 pairs of WADER container locks in the loading platform for a 20ft (30ft) or a 40ft container • 7 pairs of stake pockets 100 x 50 mm in the outer frame of the loading platform • Lift axle on the front axle with control via TEBS E depending on current axle load and loading condition • Sliding mounting rails for ALU loading ramps at the rear • 20 x 20 mm square climbing strips every 200 mm on the outer frame of the loading platform bevel • BEKAMAX central lubrication system (Pico) with standard grease NLGI-2 and removable pump protection • Four extendable warning signs approx. 423 x 423 mm with marker light (extendable by approx. 400 mm) • Holder for beacon on the warning signs • European reflector plates (red-yellow) at the rear of the trailer • 80 km/h speed stickers on the rear and both sides • Load gauge including load diagram for axle load determination • HRM metallisation (High Resistance Metallisation) of the outer frame • Complete steel structure shot-blasted, then defined visible areas metallised with ZINACOR 850 (zinc 85% - aluminium 15%) hot-finished

Stav: použitý, Dobrý stav. Dĺžka ložnej plochy 8000 mm, nájazdová výška 500 mm. Elektrohydraulická rampa (zástrčka NATO). Hodpfx Aioy Hdr Djpet

Stav: pripravené na použitie (použité), cestný traktor Iveco Trailis 500 s hydraulickým systémom. Hedpszkh Emjfx Aipot

Stav: nový, pohotovostná hmotnosť: 11 000 kg, celková hmotnosť: 68 000 kg, konfigurácia náprav: 3 nápravy, zavesenie: vzduch, Rok výroby: 2025, Výbava: ABS, GVN Príves s 4 nápravami, štandardný nízkozdvižný náves Pre viac informácií nás prosím kontaktujte. Hsdpfx Ajqxbapoipet

Stav: nový, Rok výroby: 2025, GVN príves so štandardným nízkoložiskovým návesom, 3 nápravy Hedpfoqxa Szsx Aipst Pre viac informácií nás prosím kontaktujte.

Stav: nový, konfigurácia náprav: 3 nápravy, Rok výroby: 2025, GVN príves 3-nápravový exkluzívny náves typu lowbed Pre viac informácií nás prosím kontaktujte. Hodpfx Ajqxbcnjipjt

Stav: nový, Rok výroby: 2025, GVN príves 3-nápravový nízkoplošinový Hjdeq Di Uvjpfx Aipet Prosím, kontaktujte nás pre viac informácií;

Stav: nový, Funkcionalita: plne funkčný, Rok výroby: 2026, Výbava: ABS, EBS (Elektronický brzdový systém), 2+1 nápravový príves s plošinou Hodpfx Ajyaxtheipot

Stav: nový, Rok výroby: 2026, Máme všetky európske dokumenty! Dodávku prívesov vieme zabezpečiť na podmienkach FOB, EXW, CPT, CFR alebo CIF. V prípade záujmu nás prosím kontaktujte; Hjdpfxjqx Nd Re Aipst Pre európske krajiny; Pre africké krajiny;

Stav: nový, Rok výroby: 2026, GVN príves, 4-nápravový exkluzívny podvalník Pre viac informácií nás prosím kontaktujte. Hodpfx Aioqxbfmjpet

Stav: nový, Rok výroby: 2026, GVN príves, 4-nápravový, výsuvný podvalník Hsdpfx Aeqxq Aioipot Pre viac informácií nás prosím kontaktujte.

Stav: nový, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, Máme všetky európske doklady! Hjdpeqx Nfgjfx Aipet Prívesy môžeme dodať podľa podmienok FOB, EXW, CPT, CFR alebo CIF. V prípade záujmu nás, prosím, kontaktujte.