Iveco As320S50 Baumaschinentransporter Hydr. Rampe kúpiť použité (10 033)

Stav: nový, maximálna hmotnosť nákladu: 10 800 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS braking system * Emergency release device for spring-actuated cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensator unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal – no additional truck-side installation required * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General Attachments: * Landing gear at the front * External fold-down supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Pre-installation in front of the bulkhead for subsequent fitting of container locks * Bolted 400 mm smooth steel bulkhead * Bolted rear stanchions * Side boards with spring lifting assistance Lodsrwc R Aopfx Aldjab ----Load Securing: * Perforated outer frame, approx. 45 degrees bent, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring each in the front and rear corners * Various holes in the front and rear end crossmembers for 1.2 t lashing options * Profifix lashing rail along the longitudinal axis (centered), for lashing up to LC 3000 daN ----Ramps: * One-piece hydraulic grid ramps approx. 2,750 x 600 mm (can be pushed together to 20 mm spacing) * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck over 40 l/min up to max. 140 l/min) ----Paintwork: * Chassis, drawbar, bulkhead, mechanical support legs and ramps hot-dip galvanized * Axles, springs, air tanks, front landing gear and flange drawbar eye painted in black * Side boards painted in RAL 9010 pure white * Painting of the side walls in a RAL color available at extra cost ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Sample pictures ----Delivery Time: * Immediately available ex Egestorf

Stav: použitý, maximálna hmotnosť nákladu: 26 500 kg, celková hmotnosť: 39 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 06/1994, dĺžka ložného priestoru: 13 030 mm, šírka ložného priestoru: 2 600 mm, celková šírka: 2 600 mm, celková výška: 4 000 mm, Ložná plocha: 8620 mm, sklon vzadu: 450 mm, šírka: 2600 mm, šírka: 3111 mm so zväčšením, výsuvné a/alebo sklopné rozšírenia, labutí krk: 3960 mm, výška ložnej plochy: cca. 880 mm, hydraulické nájazdové rampy bočne posuvné (DxŠ) 2900x830 mm, elektrické hydraulické čerpadlo, diaľkové ovládanie s káblom, 2x ťažné úchyty na každej strane, 5x zásuvky na stĺpiky na každej strane, výsuvné výstražné tabule, centrálny mazný systém, podperné navijaky, tri nápravy hydraulicky nútene riadené, bubnové brzdy, vzduchové odpruženie, výstražný maják, cúvacie svetlá, vozidlo môže byť polepené a/alebo označené reklamou. Lasdpfew Sb Sqex Aldsb SI85616 Naša ponuka je spravidla bez novej technickej kontroly (TÜV). V prípade záujmu o novú technickú kontrolu vám radi sprostredkujeme ponuku od našich partnerských servisov! Vozidlo môže byť polepené a/alebo označené reklamou. Platí naše všeobecné dodacie a platobné podmienky. Radi vám pripravíme ponuku financovania alebo leasingu na tento objekt. Neváhajte nás kontaktovať!

Stav: nový, výkon: 375 kW (509,86 k), typ paliva: nafta, typ prevodu: automatický, konfigurácia náprav: 3 nápravy, celková hmotnosť: 32 000 kg, dĺžka ložného priestoru: 7 475 mm, šírka ložného priestoru: 2 550 mm, výška ložného priestoru: 1 130 mm, emisná trieda: Euro 6, farba: biely, brzdy: retardér, Rok výroby: 2025, Výbava: ABS, elektronický stabilizačný program (ESP), klimatizácia, navigačný systém, nezávislé kúrenie, sadzový filter, MAN TGS 35.520 Podvozok 8x2H-4 Rám vozidla (Rázvor, previsy, ...) * 3 505 mm hlavný rázvor * 1 795 mm rázvor medzi prednými nápravami * 1 350 mm rázvor medzi zadnou nápravou a vlečenou nápravou * Koniec rámu vozidla rovný Nápravy * MAN HydroDrive, hydrostatický pohon nápravy * Riadenie – štandardný prevod * Nádrž na olej riadenia s elektronickou sondou * Predná náprava, 9 200 kg, nehnaná, znížená, riadená, nezdvíhateľná * Blatníky prednej nápravy * 2. predná náprava, 9 200 kg, HydroDrive bez prenosu hnacieho momentu, znížená, riadená, nezdvíhateľná * Prídavné blatníky 2. prednej nápravy * Zadná náprava HY-1350, 13 000 kg, HY-náprava bez prenosu hnacej sily, rovná, neriadená, nezdvíhateľná * Prídavné blatníky zadnej nápravy * Vlečená náprava, 9 000 kg, nehnaná, rovná, riadená, zdvíhateľná * Rozšírenie blatníkov * Nosnosť pruženia prednej nápravy: 9 500 kg * Nosnosť pruženia 2. prednej nápravy: 9 500 kg * Nosnosť pruženia zadnej nápravy: 13 000 kg * Nosnosť pruženia vlečenej nápravy: 8 000 kg Kabína a exteriér kabíny * Kabína NN * Komfortné uloženie kabíny * Mechanické sklápacie zariadenie kabíny * Mechanické strešné okno * Trojdielny oceľový nárazník * Predný nástup, integrovaný s možnosťou držania * Čelné sklo, vrstvené bezpečnostné sklo (VSG), tónované * Slnečná clona pred čelným sklom * Ostrekovač čelného skla * Manuálne ovládanie stieračov čelného skla * Pevný nástup * Centrálne zamykanie s diaľkovým ovládaním * 4 kľúče k vozidlu * Tónované okenné sklá dverí * Bezpečnostné sklo dverí * Zadná stena kabíny bez okna Osvetlenie a signalizačné zariadenia na kabíne (svetlomety, klaksón, ...) * Bez svetelného a svetlometového paket * Predné svetlomety H7 * Denné LED svetlá * Hmlové svetlomety H7 * Osvetlenie do zákruty H7 * Bočné smerové svetlá LED * Manuálne nastavenie dosahu svetlometov * Manuálne prepínanie stretávacích svetiel * 2 obrysové LED svetlá * 2 pneumatické klaksóny na streche kabíny * Predpríprava na výstražné majáky * 2 výstražné majáky na streche kabíny, 1 vpravo, 1 vľavo Laedpfx Asywfxtsldsb * 2 pracovné svetlá na streche kabíny, 1 vpravo, 1 vľavo * Pracovné svetlá – LED, biele * Spínač pracovných svetiel * Predpríprava na osvetlenie ložnej plochy Pracovisko vodiča * Multifunkčný volant, výškovo a uhlovo nastaviteľný * Volant s parkovacou polohou * Elektronický zámok volantu s imobilizérom * Základný kombinovaný prístroj v km/h * Digitálny záznamník jázd s diaľkovou komunikáciou (DSRC), CONTINENTAL * Overený tachograf/počítadlo kilometrov * Vzdialené sťahovanie dát z digitálneho tachografu * Predpríprava na mýtny systém Toll Collect * Zobrazenie časov riadenia na prístrojovej doske * 2 zásuvky uprostred kabíny, 12 V a 24 V * 2 výsuvné držiaky na poháre v prístrojovej doske * Ovládací panel MAN EasyControl Long Haul, 4 funkcie, ovládateľný zvonku pri otvorených dverách * Predpríprava na rádiostanicu s CB anténou na streche kabíny * 4 jednoduché DIN sloty v strešnom paneli Klimatizácia kabíny * Klimatizácia Climatronic 0P2NT * Prídavné vodné kúrenie 4 kW Interiér kabíny * Farebné prevedenie "Moon Grey" pre interiér kabíny 0P2I6 * Vnútorný štýl podľa farebného prevedenia 0PGBT * Vnútorná slnečná clona na čelné sklo, sklopná 0P2FE * Slnečná roletka na dverové okno, vodičova strana, manuálna 0P2FH * Vnútorné osvetlenie, čítacie svetlo (obojsmerné) 0PKMZ * 2 čítacie svetlá, 1 na strane vodiča a 1 na strane spolujazdca * Osvetlenie vstupného priestoru 0P2IO * Štandardné madlá pri nastupovaní 0PHPK * Neumývateľné vnútorné obloženie dverí 0P2IB *

Stav: použitý, maximálna hmotnosť nákladu: 51 556 kg, celková hmotnosť: 66 200 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 06/2000, dĺžka ložného priestoru: 14 670 mm, šírka ložného priestoru: 2 980 mm, celková šírka: 3 000 mm, celková výška: 3 200 mm, Nízkozdvižná plošina 10 350 mm, výška nakladania: cca 900 mm, labutí krk: 3000 mm, predný sklon 440 mm, zadný sklon: 880 mm, hydraulická nájazdová rampa (DxŠ) 4100x1220 mm, delená, po 7 kotviacich ôk na každej strane, úložný box na labutom krku, podperné navijaky, výsuvné varovné tabuľky, maják, 3. a 4. náprava hydraulicky nútene riadené, bubnové brzdy, vzduchové odpruženie, vozidlo môže byť polepené a/alebo popísané reklamou. SI85462 Naša ponuka je spravidla bez novej TÜV kontroly. Ak máte záujem o novú TÜV kontrolu, radi vám pripravíme ponuku od našich partnerských servisov! Vozidlo môže byť polepené a/alebo popísané reklamou. Platia naše všeobecné dodacie a platobné podmienky. Na tento objekt vám radi pripravíme financovanie alebo leasing. Lajdsxrxkiopfx Aldjb Neváhajte nás kontaktovať!

Stav: použitý, Funkcionalita: plne funkčný, pohotovostná hmotnosť: 8 000 kg, maximálna hmotnosť nákladu: 39 000 kg, celková hmotnosť: 47 000 kg, konfigurácia náprav: 3 nápravy, povolené zaťaženie nápravy (náprava 1): 13 000 kg, dovolené zaťaženie nápravy (náprava 2): 13 000 kg, povolené zaťaženie nápravy (náprava 3): 13 000 kg, prvá registrácia: 07/1983, dĺžka ložného priestoru: 11 870 mm, šírka ložného priestoru: 2 500 mm, zavesenie: parabolický list (pružina), farba: biely, Rok výroby: 1983, Návves CTC ZA90SRT47 Nízkozdvižný náves 11,87 m s hydraulickými rampami a navijakom (4,10 m + 7,35 m) 3 nápravy Lodpfx Aley Axufodeab Parabolické odpruženie Celková prípustná hmotnosť 47 000 kg – užitočné zaťaženie 39 000 kg Pre špeciálne prepravy povolená súprava 56 000 kg Exportná cena bez DPH: 18 000,00 eur Všetky údaje sú bez záruky/ možnosť omylu vyhradená.

Stav: použitý, maximálna hmotnosť nákladu: 39 450 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 07/2021, ďalšia kontrola (TÜV): 06/2026, Rok výroby: 2021, Výbava: ABS, * Nízkozdvižný príves Ceylan Treyler * Prvá registrácia: 07-2021 * TÜV platný do: 07-2026 * Zdvíhacia náprava * Hydraulické rampy Ljdpfoyt Ut Djx Aldoab * Pohotovostná hmotnosť: 8.550 kg * Užitková hmotnosť: 39.450 kg * Celková povolená hmotnosť: 48.000 kg * Viac fotografií a videí cez Whatsapp * Údaje bez záruky, medzipredaj vyhradený.

Stav: použitý, konfigurácia náprav: 3 nápravy, prvá registrácia: 02/2023, celková dĺžka: 13 250 mm, celková šírka: 2 540 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75R17.5, rázvor náprav: 10 160 mm, farba: sivý, Rok výroby: 2023, Výbava: ABS, = Additional Options and Accessories = - Reverse camera - Toolbox = Notes = Nooteboom OSDS-58-04V VSE electro-hydraulic steering. 1 x lift axle. 2 x steering axles. SAF axles, drum brakes / air suspension. Extendable by 680 cm. Hydraulic double ramps. Ramps hydraulically extendable inwards and outwards. Support legs. Wideners. Stake pockets in the side beam. Recessed lashing rings. Width boards with lighting. Stakes in the front bulkhead. Toolbox on the neck. = Further Information = Axle configuration Tyre size: 235/75R17.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Twin tires; Tyre profile left inside: 60%; Tyre profile left outside: 60%; Tyre profile right inside: 60%; Tyre profile right outside: 60% Rear axle 2: Twin tires; Tyre profile left inside: 60%; Tyre profile left outside: 60%; Tyre profile right inside: 60%; Tyre profile right outside: 60% Rear axle 3: Twin tires; Steered; Tyre profile left inside: 40%; Tyre profile left outside: 40%; Tyre profile right inside: 40%; Tyre profile right outside: 40% Rear axle 4: Twin tires; Steered; Tyre profile left inside: 30%; Tyre profile left outside: 30%; Tyre profile right inside: 30%; Tyre profile right outside: 30% Weights Unladen weight: 12,170 kg Payload: 45,830 kg GVW: 58,000 kg Maintenance APK (Technical main inspection): valid until 02.2027 Financial Information Price: On request Identification Type number: OSDS-58-04V / EXTENDABLE / HY = Company Information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), We speak Russian. We strive to provide accurate information; however, no rights can be derived from the information provided. Laodpey Daqdjfx Aldeb

Stav: použitý, pohotovostná hmotnosť: 8 800 kg, maximálna hmotnosť nákladu: 31 200 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 04/1996, dĺžka ložného priestoru: 10 000 mm, šírka ložného priestoru: 2 510 mm, výška ložného priestoru: 1 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75R17.5, farba: červená, najazdené kilometre: 1 001 km, typ prevodu: iný, kabína vodiča: iný, Miesto vozidla: Bovenden, 4 nápravy, otočný záves, listové odpruženie, rozšíriteľný na 3 m, upevňovacie oká, dvojdielne najazdové rampy, hydraulické rampy, zadná podpera, bočná hliníková ochrana, dvojmontáž pneumatík, úložný box. Nadstavba: 4-nápravový nízkoložný príves s hydraulickými dvojdielnymi rampami. Nakladacia výška cca 900 mm. 4x 10t náprava SAF, bubnové brzdy, ťažné oko 40 a 50 mm! Dĺžka horného plošiny cca 2900 mm! Dĺžka dolného plošiny cca 7100 mm! ÚDAJE O PRÍSLUŠENSTVE BEZ ZÁRUKY, zmeny, medzi-predaj a omyly vyhradené! Laedpfx Aloywvhrsdob

Stav: použitý, pohotovostná hmotnosť: 10 900 kg, maximálna hmotnosť nákladu: 43 600 kg, celková hmotnosť: 54 500 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 04/2025, dĺžka ložného priestoru: 8 700 mm, šírka ložného priestoru: 2 550 mm, výška ložného priestoru: 855 mm, veľkosť pneumatiky: 245/70 r17.5, farba: sivý, Rok výroby: 2025, prevádzková hmotnosť: 10 900 kg, Výbava: ABS, Gooseneck, rigid, in central tube design: - Enclosed outer frame with cutouts for lashing straps (LC 1,500 daN) - Steel flooring with anti-slip coating - Including perforated rail for aluminum approach ramps - 2" king pin - Mechanically operated BPW landing gear - 550 mm long, 8° bevel at the rear end of the gooseneck - Front bulkhead including stowage position for rear wall, 400 mm high - Spare wheel holder mounted upright at the front of the gooseneck - 3 pairs of recessed lashing rings LC 5,000 daN on the gooseneck deck - Aluminum drop-in sideboards, 400 mm high, consisting of 2x sideboards (length 3,150 mm) and rear board with stanchions (galvanized) - Rectangular storage box, aluminum, with folding lid and lockable, approx. 400 x 800 mm, centrally mounted - Storage box 45’, aluminum, with folding lid and lockable, approx. 400 x 800 mm, left side - Storage box 45’, aluminum, with folding lid and lockable, approx. 400 x 800 mm, right side Load platform, single telescoping: - Enclosed outer frame with cutouts for lashing straps (LC 1,500 daN) - Fixed section at front 700 mm - Steel tread plate with anti-slip coating - Beveled transition between fixed section and load platform for attaching bridging rails and wheel recesses - Excavator recess including elongated holes for load securing (LC 1,500 daN), approx. 3,850 mm long - Prepared for hydraulic ramp (electric supply fitted) - Beams for extension to 3,000 mm width - Beveled vehicle rear, 8°, 550 mm long - Sled-type design for easy mounting and removal of ramps - Continuous rear mudflap - 1 pair of lashing points LC 10,000 daN centrally on the platform behind the gooseneck - 7 pairs of lashing points LC 10,000 daN on outer frame of the platform - 6 pairs of stake pockets 100 x 50 mm on the outer frame of the platform - 1 pair of lashing points LC 10,000 daN centrally at the rear of the platform - 1 pair of stake pocket rails approx. in the middle of the platform - 1 pair of stake pocket rails on the fixed section - 1 pair of stake pocket rails behind the last axle Ramps: - Hydraulic twin-fold ramps, 2,750+1,500x800 mm Ledpfei Ai E Rjx Aldoab - Larch timber decking - Operated via remote control (either wired or wireless) - Ramps with quick-change (removal system) Chassis: - BPW ECO Max axle make - 2 ride heights - 4 axles, each 10 t (technically 12 t) - Twin tires 245/70 R17.5 - 2 rigid axles and 2 friction-steered axles - Reverse steering lock for friction-steered axles via reverse gear - Brake system make Knorr (in accordance with EU directives with EBS-E) - TIM G2 by Knorr (Trailer Information Module) - RSS (Roll Stability Support) - Load-dependent lift axle on the first axle including starting aid (forced lowering of lift axle via TIM possible) Accessories: - 4 wheel chocks with holder - 2 pairs of warning boards 423 mm x 423 mm, with 2 marker lights and mounting position for beacon, continuously adjustable up to 3,950 mm - Mounting options on gooseneck and platform (alternatively on ramp, if present) are included - Insertable bulkhead at the end of the excavator recess - Electro-hydraulic unit for ramp operation - Wireless remote control for ramp operation - Hydraulic stabilizer legs at vehicle rear for support during loading - 1 pair of additional reversing lights at the rear, activated with reverse gear - Larch wood extension beams (option)

Stav: nový, pohotovostná hmotnosť: 10 400 kg, maximálna hmotnosť nákladu: 45 600 kg, celková hmotnosť: 56 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 600 mm, šírka ložného priestoru: 2 550 mm, výška ložného priestoru: 1 000 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75R17.5, farba: zelený, Rok výroby: 2021, typ prevodu: iný, kabína vodiča: iný, Výbava: ABS, Umiestnenie vozidla: Bovenden, 3 nápravy, vzduchové odpruženie, ABS (protiblokovací systém), rozšíriteľný na 3 m, hydraulické rampy, podpora vzadu, podpery. Nadstavba: 3-nápravový nízkopodlažný náves s hydraulickými najazdovými rampami, 3x12t nápravy, bubnové brzdy, výška nakladania cca 1030 mm, rozšíriteľný na 3 m, hydraulické rampy poháňané vlastným elektrickým čerpadlom! Vlastné hydraulické čerpadlo s elektromotorom, nezávislé od ťahača, dĺžka ponad labutí krk cca 4 m, dĺžka dolného lôžka cca 8,6 m! Nové vozidlo zo skladu! Schopnosť schválenia pre EÚ sa ešte kontroluje! Údaje o príslušenstve bez záruky, zmeny, medzi predaj a omyly vyhradené! Laodpfxew Rf N Ds Aldeb

Stav: použitý, maximálna hmotnosť nákladu: 27 700 kg, celková hmotnosť: 35 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 04/2005, Rok výroby: 2005, Výbava: ABS, Empl 3-nápravový nízkozdvižný príves, posledná náprava nútene riadená, hydraulické dvojité rampy cez vlastné hydraulické čerpadlo NATO. Vlastná hmotnosť: 7 300 kg Užitočné zaťaženie: 27 700 kg Dĺžka: 13,2 m Stav: veľmi dobrý Pneumatiky: 70% Laodpfx Alox Sbpqsdjb

Stav: nový, maximálna hmotnosť nákladu: 30 740 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lifting and lowering system and RtR valve * Smard-Board for payload determination * Warning sign kits front & rear * Reflective contour markings on the sides and rear * Removable rear rotating beacon * LED lighting * Straight drawbar with 50 mm towing eye and stepless height adjustment * Toolbox made of powder-coated sheet steel and basket-type spare wheel holder, right side * Front: closed single plastic mudguards * Rear: straight steel mud flaps with spray suppression * Side underrun protection * Turntable platform extended by 520 mm with 45° corners and 3 recessed lockable storage compartments including lids Ljdpfxel Tik No Aldsab * Chassis made of high-strength fine-grain steel * Decking over turntable platform: 50 mm softwood, and on low-bed platform: 60 mm softwood * Outer planks of the loading ramps made of hardwood * Four stake pockets on each side (stakes not included) with simultaneous 2 t lashing option * Lashing package: two 6.4 t lashing eyes front left and right on the main frame of the turntable platform * On the outer frame, two pairs front and rear of 13.4 t lashing rings each, and four pairs per side of 10 t swivel and lowerable lashing rings * Loadable in all directions and integrated in the outer frame * Two pairs of 6.4 t lashing rings on the excavator arm rest, side * 8 pairs of galvanized folding outriggers for 3 m total width (not on rear slope) * Widening planks stored on the left side in a storage compartment * Excavator arm rest above the rear axle to the end of the loading slope approx. 2,100 x 740 x 190 mm * Mechanical drop supports at the rear * Hydraulic folding ramps with hydraulically extendable tip, approx. 4,650 x 720 mm, incl. hydraulic lateral ramp adjustment & load holding valve * Loading area above turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loading height, loaded: approx. 890 mm, +/- 20 mm (incl. 860 mm loading slope) * Flow divider installed * Chassis, turntable, loading ramps, folding outriggers, and mechanical drop supports hot-dip galvanized * Axles, drawbar, air tank, and turntable painted in black * Tires: 235/75 R 17.5 * New vehicle without previous registration with manufacturer's warranty * Subject to errors and prior sale * Immediately available from Egestorf near the A7

Stav: nový, maximálna hmotnosť nákladu: 30 740 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift and lowering device and RtR valve * Smard board for load weight determination * Warning sign packages front and rear * Side and rear reflective contour tape * Removable rear revolving beacon * LED lighting * Straight drawbar with 50 mm towing eye and infinitely variable height adjustment * Toolbox made of powder-coated sheet steel and spare wheel holder in basket design on the right side * Front closed single plastic fenders * Rear straight steel mud guards, each with spray protection (spray mist reduction) * Side anti-collision guard * Extension of the turntable platform by 520 mm with 45° corners and 3 recessed storage compartments incl. lids, lockable * Chassis made of high-strength fine-grained steel * Floor above the turntable platform made of 50 mm and in lowbed platform of 60 mm softwood * Outer planks of the access ramps made of hardwood * Each side with 4 stake pockets (with simultaneous 2 t lashing possibility, no stakes included) * Lashing package: 2 lashing eyes 6.4 t at the front left and right on the main frame of the turntable platform * On the outside frame: each side front and rear 2 pairs of 13.4 t lashing rings, plus each side 4 pairs of 10 t swinging and lowering lashing rings * Loadable from all directions and recessed into the outside frame * 2 pairs of lashing rings 6.4 t on the side in excavator arm holder * 8 pairs of galvanized fold-out outriggers for 3 m overall width (however, not on the tail slope) * Side extension planks stored in a compartment on the left * Excavator arm holder above the rear axle up to the end of the access slope approx. 2,100 x 740 x 190 mm * Mechanical rear support legs * Hydraulic folding ramps with hydraulically extendable tip section approx. 4,650 x 720 mm incl. hydraulic side ramp displacement & load-holding valve Ljdpfx Alel Tphrjdsab * Loading area above the turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loading height loaded approx. 890 mm, +/- 20 mm (including approx. 860 mm access slope) * Flow divider installed * Chassis, turntable, ramps, fold-out outriggers, and mechanical rear supports hot-dip galvanized * Axles, drawbar, air tanks, and turntable painted in black * Tires 235/75 R 17.5 * New vehicle, no prior registration, with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf on the A7

Stav: použitý, pohotovostná hmotnosť: 10 680 kg, maximálna hmotnosť nákladu: 29 320 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 08/2011, ďalšia kontrola (TÜV): 12/2026, dĺžka ložného priestoru: 10 500 mm, šírka ložného priestoru: 2 510 mm, výška ložného priestoru: 970 mm, zavesenie: vzduch, veľkosť pneumatiky: 245/70R17.5, farba: biely, najazdené kilometre: 1 001 km, typ prevodu: iný, kabína vodiča: iný, Výbava: ABS, Umiestnenie vozidla: Bovenden, 4 osi, otočný čap, vzduchové odpruženie, ABS (antiblokovací systém), rozšíriteľný na 3 m, upínacie oká, hydraulické nájazdové rampy, zadná opora, dvojmontáž pneumatík, kolískové jamy. Nadstavba: 4-osý nízkoložný príves s hydraulickými nájazdovými rampami, 4x 10t Gigant nápravy, bubnové brzdy! Dĺžka rámp cca 2850 mm! Nakladacia výška cca 970 mm! Výška kolískových jám vpredu cca 600 mm a vzadu cca 670 mm! Príves dostal nový otočný čap! ÚDAJE O VYBAVENÍ SÚ BEZ ZÁRUKY, zmeny, medzičasný predaj a omyly vyhradené! Laodpfxjxx A H Is Aldob

Stav: použitý, celková hmotnosť: 47 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 11/2004, ďalšia kontrola (TÜV): 08/2026, * Müller Mitteltal TS3 nízkozdvižný náves * Prvá evidencia: 11/2004 * 3 nápravy * Vzduchové odpruženie * Gigant nápravy * Hydraulické dlhé rampy, posuvné a sklopné * Rozšírenia ložnej šírky z 2,50 m na 3,0 m Ledpow Tgkbofx Aldeab * Dĺžka ložnej plochy: 8,50 m pri ložnej výške 0,85 m * Dĺžka ložnej plochy na krku: 3,40 m pri ložnej výške 1,50 m * Podpery * Pohotovostná hmotnosť: 10 260 kg * Technicky prípustná celková hmotnosť: 47 000 kg * STK platná do: 08/2026 * Technická kontrola platná do: 02/2026

Stav: použitý, pohotovostná hmotnosť: 10 480 kg, maximálna hmotnosť nákladu: 23 520 kg, celková hmotnosť: 34 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 06/2001, ďalšia kontrola (TÜV): 10/2025, dĺžka ložného priestoru: 13 380 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 3 080 mm, zavesenie: vzduch, veľkosť pneumatiky: 245/70R17.5, farba: sivý, najazdené kilometre: 1 001 km, typ prevodu: iný, kabína vodiča: iný, Výbava: ABS, zdvíhacie čelo, Vehicle location: Bovenden, 3 axles, BPW axles, air suspension, ABS (anti-lock braking system), Edscha sliding roof, tarpaulin, lashing eyes, hydraulic ramps, rear support, lateral aluminium underrun protection, fire extinguisher box, landing legs, twin tyres, storage box, cable remote control, winch. Body: 3-axle flatbed semi-trailer with tarpaulin and Edscha sliding roof, winch & hydraulic access ramp with cable remote control, 3x 9t BPW axles, drum brakes! Ramp length approx. 3150 mm! Low bed length approx. 8400 mm! Completely overhauled in 2023/2024 for approx. €10,000! Spare wheel available at extra cost! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted. Laodevhcd Ajpfx Aldsb

Stav: použitý, pohotovostná hmotnosť: 6 500 kg, maximálna hmotnosť nákladu: 23 500 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 01/2008, ďalšia kontrola (TÜV): 03/2024, dĺžka ložného priestoru: 8 000 mm, šírka ložného priestoru: 2 520 mm, výška ložného priestoru: 910 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75R17.5, farba: oranžová, najazdené kilometre: 1 001 km, typ prevodu: iný, kabína vodiča: iný, Výbava: ABS, Miesto vozidla: Bovenden, listové pruženie, 3 nápravy, nápravy BPW, otočný čap, ABS (antiblokovací systém), upevňovacie oká, hydraulické rampy, zadné podpery, bočná hliníková ochrana proti podbehnutiu, dvojitá montáž pneumatík, odkladacia schránka Nadstavba: Hydraulické rampy, možné rozšíriť na 3 m. BPW nápravy, bubnové brzdy, upevňovacie krúžky na vonkajších stranách. Laedpfx Aoqpgtmeldjb Dĺžka ramien cca 4000 mm! ÚDAJE O PRÍSLUŠENSTVE SÚ BEZ ZÁRUKY, zmeny, predaj počas inzercie a chyby vyhradené!

Stav: nový, maximálna hmotnosť nákladu: 23 500 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, Výbava: ABS, * T 3: * ABS braking system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalizer * Side underrun protection * Swing-out supports at rear of chassis frame * Mechanically adjustable warning sign packages front & rear * Front axle: closed plastic mudguards; rear axle: straight galvanized steel skirts, each with splash guards * Reflective contour markings on the sides and rear * Hinged lid (hot-dip galvanized) for toolbox on the bogie platform * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm – black powder-coated – mounted laterally under the chassis * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon (mounted at rear) * Drawbar with 40 mm towing eye, height adjustable via tension spring & turnbuckle * 4 stake pockets per side (stakes not included) with integrated lashing options * Load securing package includes: 2 lashing eyes (6.4 t) at front left & right on main frame of bogie platform * 5 pairs UVV-certified swiveling and retractable lashing rings * Loadable in all directions and recessed into outer frame corners: 13.4 t, otherwise 10 t Lsdsq Dyv Iepfx Aldsab * 6 pairs mechanical folding outriggers for 3 m overall width (not in rear taper) * Extension planks stored in a compartment under the loading area * Excavator arm rest over rear axle up to rear cross-member, approx. 2,100 mm long (2 pairs 6.4 t lashing rings mounted on excavator arm rest) * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable ramp tip and load-holding valves, hydraulic ramp sideways shift * Hydraulic flow divider in the trailer (for truck hydraulic pump capacity over 40 l/min up to 140 l/min), dual-line hydraulics * Loading area above slewing ring: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (including 860 mm sloped approach) * Loaded deck height approx. 860 mm +/- 30 mm compensating unit * Chassis, bogie, folding outriggers, drop-down rear supports, and drive-on ramps hot-dip galvanized * Axles, springs, drawbar, air tanks etc. painted black * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Available from CW 19/2026

Stav: nový, maximálna hmotnosť nákladu: 23 500 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 380 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * PT 30 Profile: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lifting and lowering device including return-to-ride (RtR) valve * Smart-Board installed on trailer as info tool (for axle load display – front and rear separate) * Tyre pressure monitoring system with in-cab display via EBS signal, no installation required on the truck * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign panels front and rear * VA plastic quarter mudguards with spray protection * Rear straight galvanized steel skirts with spray protection * High-visibility reflective contour tape laterally and at the rear * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * Drawbar 1,200 mm long with 40 mm towing eye and height adjustment via traction spring & turnbuckle * Toolbox made of galvanized steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted right side Lodstplwijpfx Aldsab * Equipment box within turntable with folding lid, 2 container locks permanently fitted (directly after turntable platform) * ROBOT-welded anti-slip surface on steel plate of the turntable platform (raised weld seams) * Load securing package (La-Si-Paket) includes: 2 lashing eyes (13.4 t) front left & right on front wall support, 1 pair each front & rear UVV lashing rings (13.4 t), 3 pairs per side of swiveling and retractable UVV lashing rings (10 t), loadable in any direction, integrated into external frame, plus 3 stake pockets per side with simultaneous 2 t lashing point * 6 pairs of mechanical folding outriggers for 3 m overall width (excluding rear slope) * Extension planks stored in centre of load area * Hydraulic one-piece access ramps approx. 3,000 x 720 mm * Mechanically adjustable laterally * 4-way hydraulic valve block for later retrofitting of hydraulic ramp shifting * Excavator arm rest spanning rear axle up to end crossmember (total length approx. 2,100 mm) * 2 pairs of lashing eyes LC 6400 daN in the excavator arm rest, positioned sideways in main frame * 2 galvanized steps at turntable, left and right * Profifix lashing rail centered lengthwise in flat area for lashing up to LC 3000 daN * Chassis, turntable, folding outriggers, drop leg supports and access ramps hot-dip galvanized * Axles, turntable ring, air tanks, and drawbar painted in black finish * Loading edge when loaded approx. 910 mm +/- 20 mm air suspension * New vehicle with manufacturer’s warranty * Errors and prior sales excepted * Available approx. from calendar week 22/2026 * Sample images

Stav: nový, maximálna hmotnosť nákladu: 23 500 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 380 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * PT 30 Profile: * EBS (Electronic Braking System) Lodpfx Alexptn Redsab * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lift/lower function and RtR-valve * Smart-Board infotool mounted on trailer (for axle load display – front and rear individually) * Tire pressure monitoring with display capability in the truck via EBS signal, without installation required on the truck side * Side underrun protection * Swing-out support legs at the rear of the chassis frame * Mechanically adjustable warning sign sets at front and rear * Front axle: plastic quarter mudguards with spray protection * Rear axle: straight, galvanized steel skirts with spray protection * Reflective contour marking strips on sides and rear * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * Drawbar 1,200 mm long with 40 mm towing eye and height adjustment via draw spring & turnbuckle * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted right side * Storage box in the turntable for accessories, with hinged lid, 2 container locks permanently installed (directly after turntable platform) * ROBOT-welded anti-slip surface on the steel plate of the turntable platform (projecting weld beads) * Load securing package including: 2 lashing eyes (13.4 t) at front left & right on the bulkhead beam, 1 pair each of UVV lashing rings (13.4 t) at front & rear, and 3 pairs each side of UVV lashing rings (10 t), pivotable and lowerable, loadable in all directions and recessed in the outer frame; 3 stake pockets per side, each with 2 t lashing capability * 6 pairs of mechanical folding outriggers for 3-meter overall width (not in rear bevel) * Width boards stored centrally on the loading platform * Hydraulic one-piece loading ramps, approx. 3,000 x 720 mm * Mechanically adjustable sideways * 4-way valve block for future retrofitting of hydraulic ramp adjustment * Continuous excavator arm rest above rear axle up to end beam (total length approx. 2,100 mm) * 2 pairs lashing eyes LC 6,400 daN in excavator arm rest, mounted laterally in the longitudinal frame * 2 galvanized steps at the turntable, left and right * Profifix lashing rail in the center axis, in flat area for lashing up to LC 3,000 daN * Chassis, turntable, folding outriggers, drop legs and loading ramps hot-dip galvanized * Axles, slewing ring, air tank, and drawbar painted in black * Loading edge height approx. 910 mm +/- 20 mm with air suspension * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Available approx. from CW 22/2026 * Sample photos

Stav: nový, maximálna hmotnosť nákladu: 23 500 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, Výbava: ABS, * T 3: * ABS braking system * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle equalization at the rear * Side underrun protection * Swing-down support legs at the rear of the chassis frame * Mechanically adjustable warning panel sets, front & rear Lajdetplwfepfx Aldsb * Front axle: closed plastic mudguards; rear axle: straight, galvanized sheet steel splash guards, each with spray protection * Contour marking tape, reflective on the sides and rear * Hinged (hot-dip galvanized) toolbox lid on the bogie platform * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted laterally under the chassis * 15-pin electrical connector * LED lighting 12/24 V * Removable LED beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via draw spring & turnbuckle * 4 stake pockets each side (stakes not included), also suitable for lashing * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform * 5 pairs of UVV-compliant lashing rings, foldable and retractable * Loadable in all directions and recessed into the outer frame corners at 13.4 t, elsewhere 10 t * 6 pairs of mechanical fold-out extensions for a total width of 3 m (not on the tail slope) * Widening boards stored in a compartment under the loading area * Excavator arm rest over the rear axle up to the end crossmember, approx. 2,100 mm long (2 pairs of 6.4 t lashing eyes on the sides of the excavator arm rest) * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable ramp tip and load-holding valves, hydraulic lateral ramp displacement * Hydraulic flow divider in trailer (for truck hydraulic pump output over 40 ltr up to max. 140 ltr/min), dual-line hydraulics * Loading area above fifth wheel: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm approach slope) * Loaded deck height approx. 860 mm +/- 30 mm via compensation unit * Chassis, bogie, folding outriggers, drop-down supports at the rear and access ramps hot-dip galvanized * Axles, springs, drawbar, air reservoirs etc. painted in black * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from calendar week 19/2026

Stav: nový, pohotovostná hmotnosť: 10 100 kg, maximálna hmotnosť nákladu: 38 900 kg, celková hmotnosť: 49 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 200 mm, šírka ložného priestoru: 2 550 mm, veľkosť pneumatiky: 245/70 R 17,5, prevádzková hmotnosť: 10 100 kg, Výbava: ABS, Chassis: - Stable welded steel frame construction with front frame drop and flat load area, rear chamfer approx. 500x100 mm - Neck section 200 mm with beveled corners - Tapered end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in the area behind rear chamfer) - 2 kingpin positions with interchangeable 2” kingpin - Outer frame closed outwards with perforated profile for lashing with tension belts (no chains possible) - Reinforced frame version / point load at center of gravity - Provisions for extendable load platform wideners - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting approx. after 2nd axle to end of vehicle - 1 pair of wheel recesses in front of axle with steel covers - (Covers with Körapur coating), depth approx. 400 mm, plus 1 pair of wheel recesses between 1st and 2nd axle with steel covers - Underrun protection = extended end plate - Drop-leg supports at rear Ramps: - 2-piece loading ramps, special design with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting equipment (only in conjunction with electro-hydraulic power pack) - Width approx. 800 mm Ljdpfx Aewviwkoldsab - Wooden decking - Including traction ribs on ramps - Secured in transport position with tension belts - Operation via control lever mounted rear right in direction of travel - Sideways hydraulically adjustable Floor: - 35 mm larch wood flooring with aluminium omega profiles Landing gear: - Mechanical 24-ton landing legs, single-sided operation with compensating device Axles, steering and tires: - BPW air suspension axles, 10 t axle load each, airbag diameter 360 mm - S-cam brake 300/200 mm, asbestos-free brake pads - Automatic slack adjuster - Lifting and lowering device with total lift approx. 200 mm - 2nd drive height via ball valve +50mm - 1st axle with lifting function (wired via EBS), fully automatic control with mechanical emergency activation via button on trailer - 3rd axle as friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, center-mounted offset - 12 tires 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring Accessories: - Removable side and rear boards on gooseneck approx. 400 mm high - Spare wheel holder - Side aluminum underride protection - 4 wheel chocks - Elongated license plate holder in end plate - 1 ECE removable sign board on the rear - 11 pairs ZK modules 10t at the sides: - 2x on the gooseneck - 9x on the load platform - Metal fenders with clear-pass - Extendable warning plates incl. 3 position lights each, front at landing legs and rear ahead of end plate, steplessly extendable up to load width of 4,500 mm - 4 sockets for warning plates storable in stake pockets on load platform - 6 pairs side stake pockets for 100x50 mm stakes - 2 crosswise rows of stake pockets for 100x50 mm stakes on gooseneck from outer frame to main frame (1 in front and 1 behind kingpin positions) - 3 crosswise rows of stake pockets for 100x50 mm stakes on load platform from outer frame to main frame (1 in front area, 1 in front of 1st axle and 1 behind 3rd axle) - 2 pairs steel plates in load platform for container locks to accommodate 1x 20ft container - Rubber apron mounted on underrun protection - Steel shot blasting, chassis hot-dip galvanized and primed - Painting of chassis/wheel hubs/outer frame in DB 7350 Novagrau

Stav: nový, pohotovostná hmotnosť: 10 700 kg, maximálna hmotnosť nákladu: 38 800 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 r 17,5, farba: sivo-čierny, Výbava: ABS, Gooseneck: •Gooseneck with beveled front corners at 45° and rear chamfer approx. 750 mm x 10° •3 pairs of lash rings •30 mm thick hardwood decking Extendable Load Platform: •Extendable load platform with rear chamfer approx. 1,000 mm x 8° •Cut-outs in the outer frame of the load platform for attaching lashing straps •Approx. 48 mm thick hardwood decking, over the axles with chequer plate covering Ljdpohlz S Njfx Aldeab Two-piece Steel Ramps: •One pair of galvanized, two-piece steel ramps with approx. 48 mm thick hardwood covering •Ramps with hydraulically foldable ramp sections, hydraulic lifting system, and hydraulic lateral adjustment •Maximum capacity per pair: approx. 40,000 kg Axles and Tyres: •BPW axles and suspension, 2 rigid axles, 1 trailing steering axle •Technical axle load: 12,000 kg •Electromagnetic reverse lock, activated via reverse gear and manually •Air suspension with lift and lower valve •Axle tools •235/75 R 17.5 3PMSF Braking System: •WABCO braking system according to EU regulations with EBS-E Paintwork: •First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component zinc dust primer •High-quality, single-tone 2-component topcoat in MB 7350 Novagrau •Rear section metalized and painted in RAL 9010 Landing Legs: •JOST landing gear with 2-speed gearbox for 24 t lifting capacity (50 t test load). Steel Construction: •Steel construction made from high-strength fine-grained steels •Steel grades: •S355J2+N/S355MC •S690QL/S700MC Electrical System: •Electrical system complying with EU regulations, 24 volt lighting •ASPÖCK-UNIBOX on the front connection board with 24N, 24S & 15-pin sockets Accessories Included: •One spare wheel with holder •One galvanized steel front wall approx. 400 mm high •Yellow-red air couplings on the galvanized front connection board •4 wheel chocks •A holder for a warning beacon at the rear of the trailer •Recess in the rear gooseneck area for ALU approach ramps •Galvanized folding supports under the chamfer of the load platform •Cover plates to bridge the gap between the ramps and the load platform •White reflective tape as per EU regulations on the sides, extension, and rear (red) •Electro-hydraulic unit at the rear, under the load platform •One holder each on the gooseneck and on each ramp, left and right, for warning signs incl. socket •Ramp control valves mounted on the right-hand side of the trailer •On the gooseneck, ALU side and rear boards approx. 2,440 x 400 mm •Rear galvanized plug-in stakes are removable (body length approx. 2,560 mm) •Four warning panels, extendable by approx. 400 mm, each with a position light •3 pairs of WADER container pockets in the platform for a 20ft, 30ft, or 40ft container •6 pairs of stake pockets (100x50 mm) in the outer frame of the load platform •Galvanized extensions, extendable by approx. 230 mm per side •20 x 20 mm square toehold strips every 200 mm on the outer frame of the platform chamfer •Sanded surface finish painted on the chequer plates, king pin, and load platform as anti-slip protection •Load gauge for determination of axle loads, including load diagram •HRM metallization (High Resistance Metallisation) of the outer frame •Complete steel structure shot-blasted, then the defined visible areas metallized with ZINACOR 850 (zinc 85% - aluminium 15%) by hot finish

Stav: nový, pohotovostná hmotnosť: 15 420 kg, maximálna hmotnosť nákladu: 61 080 kg, celková hmotnosť: 76 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 900 mm, veľkosť pneumatiky: 235/75/r17,5, farba: sivý, Výbava: ABS, Gooseneck: Gooseneck with rear bevel of approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading Area: Extendable loading area with rear bevel of approx. 500 mm x 8° 8 pairs of folding outward lashing rings 1 pair of flat lashing rings at the front of the loading area Cutouts in the outer frame of the loading area for securing load straps Approx. 48 mm thick hardwood flooring, non-slip checker plate cover above the axles Two-piece Steel Ramps: One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering. Ramp parts are hydraulically foldable, equipped with hydraulic lifting mechanism and hydraulic lateral adjustment. Maximum load per pair: 50,000 kg. Landing Legs: • JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: BPW axles and suspension, 4th and 5th axle steering Technical axle load: 12,000 kg 4th and 5th axles with electromagnetic reverse lock activated via reverse gear and manual operation Tyres 235/75 R 17.5 3PMSF Lodpfx Aljl Sl Izodeab Braking System: Braking system according to EU regulations with EBS-E (4S3M) Sockets and Lighting: Electrical system according to EU regulations, 24-volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets Connections according to ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paintwork: First-class and durable corrosion protection, achieved by standard shot-blasted welded frame with a 2-component (2K) zinc dust primer High-quality single color 2-component (2K) topcoat in MB 7350 Novagrau Rear section metallized and painted in RAL 9010 (Pure White) Metallic lacquer not available Steel Structure: Steel construction made from high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Accessories: One spare wheel with bracket in front of the bulkhead 2" kingpin Galvanized steel front wall approx. 400 mm high Yellow-red air couplings on the galvanized front connector strip 2 wheel chocks with holders on the front wall Provision at the rear of the gooseneck for ALU drive-on ramps Bracket for a beacon at the rear of the trailer Galvanized supports under the rear bevel of the loading area White reflector tape according to EU regulations on the sides, at the extension and rear red Electro-hydraulic unit at the rear under the loading area On gooseneck and rear panel (left and right) bracket for warning signs incl. socket Control valves for the ramps installed on the right side of the trailer A mud flap at the rear of the trailer Manual and description on USB stick 3.5" kingpin supplied loose On the gooseneck, plug-in ALU side walls and rear wall approx. 2,440 x 400 mm (LxH) Rear galvanized plug-in stakes are removable (Length of the structure approx. 2,560 mm) 3 pairs of WADER container pockets on the loading area for one 20' (30') or a 40' container 6 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading area Galvanized extensions, extendable by approx. 230 mm per side Lifting axle on the front axle, control via TEBS-E depending on current axle load and loading status Square climb strips 20 x 20 mm, every 200 mm on the outer frame of the loading area bevel On the checker plates, above the kingpin and the loa

Stav: použitý, maximálna hmotnosť nákladu: 31 000 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 07/2024, dĺžka ložného priestoru: 9 290 mm, šírka ložného priestoru: 2 520 mm, výška ložného priestoru: 950 mm, * PT 40.0 Profile: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lifting and lowering system as well as RtR valve * Pressure gauge for load weight determination (axles separated onto 2 air suspension circuits) * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning panel sets front and rear * Front axle with plastic quarter mudguards and splash guards * Rear axle with straight galvanized steel skirts and splash guards * Reflective contour tape on sides and rear Lasdpol Tlhrsfx Aldob * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector * LED lighting system 12 / 24 V * Removable LED rotating beacon at rear * 2 LED reversing lights (activated via reverse gear) * Coupling bar with 50 mm towing eye and height adjustment * Tool box made of galvanized sheet steel, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Extension in front of the turntable platform, approx. 490 mm long with 45° corners * ROBOT-welded anti-slip coating on the turntable platform steel plate * Load securing package consisting of: Left & right in front of the front wall support each 1 x 13.4 t UVV lashing ring, 4 holes on each side of the turntable platform with 2 t lashing capacity each, 1 pair of lashing rings (13.4 t) hanging at the rear left & right in front of the rear support, on each side 4 pairs of UVV lashing rings (10 t) that can be swivelled and lowered, loadable in all directions and integrated into the outer frame, 3 stake pockets on each side with simultaneous 2 t lashing possibility * Hot-dip galvanized mechanical folding supports for 3 m total width (not in the rear slope) * Board holder for extensions under the chassis on the left side in longitudinal direction * Excavator arm support above rear axle to end support, approx. 2,100 mm long and 190 mm deep, on each side 2 pairs of 6.4 t lashing rings in the arm tray * Hardwood flooring on the running surfaces of the low-bed platform * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * Outer planks of the loading ramps made from hardwood * Steel construction prepared for 6-way control valves * Loading edge unloaded approx. 950 mm +/+ 20 mm chassis * Turntable, folding supports, mechanical drop supports, loading ramps hot-dip galvanized * --Axles, air tanks, drawbar painted in black-- * Tyres: 235/75 R 17.5 * Vehicle has a one-day registration in 07/2024, due to missing tire pressure monitoring system and has not been loaded/used * New vehicle with manufacturer's warranty * Errors and interim sale excepted * Immediately available ex stock Egestorf