Príves s pracovnou plošinou

MÜLLER-MITTELTAL T4, Luftfed., hydr. Klapprampe, Baggerstiel.

Stav: nový, maximálna hmotnosť nákladu: 30 740 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift and lowering device and RtR valve * Smard board for load weight determination * Warning sign packages front and rear * Side and rear reflective contour tape * Removable rear revolving beacon * LED lighting * Straight drawbar with 50 mm towing eye and infinitely variable height adjustment * Toolbox made of powder-coated sheet steel and spare wheel holder in basket design on the right side * Front closed single plastic fenders * Rear straight steel mud guards, each with spray protection (spray mist reduction) * Side anti-collision guard * Extension of the turntable platform by 520 mm with 45° corners and 3 recessed storage compartments incl. lids, lockable * Chassis made of high-strength fine-grained steel * Floor above the turntable platform made of 50 mm and in lowbed platform of 60 mm softwood * Outer planks of the access ramps made of hardwood * Each side with 4 stake pockets (with simultaneous 2 t lashing possibility, no stakes included) * Lashing package: 2 lashing eyes 6.4 t at the front left and right on the main frame of the turntable platform * On the outside frame: each side front and rear 2 pairs of 13.4 t lashing rings, plus each side 4 pairs of 10 t swinging and lowering lashing rings * Loadable from all directions and recessed into the outside frame * 2 pairs of lashing rings 6.4 t on the side in excavator arm holder * 8 pairs of galvanized fold-out outriggers for 3 m overall width (however, not on the tail slope) * Side extension planks stored in a compartment on the left * Excavator arm holder above the rear axle up to the end of the access slope approx. 2,100 x 740 x 190 mm * Mechanical rear support legs * Hydraulic folding ramps with hydraulically extendable tip section approx. 4,650 x 720 mm incl. hydraulic side ramp displacement & load-holding valve * Loading area above the turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loading height loaded approx. 890 mm, +/- 20 mm (including approx. 860 mm access slope) Hfsdel Tphrepfx Ah Nef * Flow divider installed * Chassis, turntable, ramps, fold-out outriggers, and mechanical rear supports hot-dip galvanized * Axles, drawbar, air tanks, and turntable painted in black * Tires 235/75 R 17.5 * New vehicle, no prior registration, with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf on the A7

Stav: nový, maximálna hmotnosť nákladu: 30 310 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, NOVÉ VOZIDLO Fliegl 4-nápravový nízkoložný návěs s 2 páry kolových výklenků a rampami Celková hmotnost: 40 000 kg Užitečné zatížení: 30 310 kg Provozní hmotnost: 9 690 kg Celková délka: 12 000 mm Ložná délka: 10 000 mm Ložná plocha: 7 150 mm včetně 850 mm náběhové rampy Ložná výška: 900 mm 1. pár kolových výklenků za schodem v ložném prostoru, spodní délka cca 1 600 mm, hloubka 400 mm 2. pár kolových výklenků mezi nápravami v ložném prostoru, spodní délka 600 mm, hloubka 300 mm Rozšíření na 3 000 mm, výstražné tabule, výstražné majáky, Velký vázací balíček 5 párů kapes na sloupky ve vnějším rámu Hjdsnzlg Depfx Ah Nsff Výklenek na rameno bagru, délka 1 800 mm, hloubka 150 mm Tažná oj 50 mm Vzduchové odpružení s ventilem pro zvedání a spouštění, samostatně ovladatelné BPW bubnové brzdy Pneumatiky 235 / 75 R 17,5" Zjišťování nápravového zatížení přes EBS CAN Bus signál, Trailer Info Center Rampy 2 800 mm × 750 mm s hydraulickým ovládáním Hydraulický boční posuv Nabídka operativního leasingu: doba trvání 48 měsíců, zůstatková hodnota 40 %, akontace pouze DPH ze splátek nájmu, měsíční splátka 970,00 EUR bez DPH Vozidlo je k dispozici od 11.09.2023 po veletrhu Neumünster. Navštivte nás na veletrhu Nordbau – stánek West 121, přímo u hlavního vchodu. Další nové i použité 3-, 4- a 5-nápravové nízkoložné návěsy ihned k dispozici.

Stav: nový, maximálna hmotnosť nákladu: 30 010 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 10 000 mm, šírka ložného priestoru: 2 520 mm, výška ložného priestoru: 900 mm, celková šírka: 2 550 mm, New vehicle: Fliegl 4-axle low-bed trailer with wheel recesses and split ramps, model VTS 400 RM Lease-purchase offer: 48-month term, down payment only VAT, residual value 40% Monthly payment: EUR 899.00 Hfjdpfstrizksx Ah Nsf Vehicle / Body: Low-bed trailer First registration: New vehicle Gross vehicle weight: 24,000 kg / 40,000 kg Unladen weight: 9,990 kg Payload: 14,010 kg / 30,010 kg Overall length: 12,000 mm Loading length: total approx. 10,000 mm, gooseneck approx. 2,850 mm, load bed including rear bevel approx. 7,150 mm Width: 2,550 mm Loading height: 900 mm Further information Chassis: low-bed trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear supports Wheel chocks with holders Aluminium side underrun protection Full-width rear spray flap Half-shell mudguards on the 1st and 2nd axles with anti-spray flaps behind each axle, anti-spray flap behind 4th axle Excavator arm recess running from the rear axles to the back, approx. 1,800 mm long, approx. 650 mm wide, and approx. 150 mm deep 2 pairs of lashing holes (5 t each) in the excavator arm recess, positioned on the longitudinal frame approx. 300 mm from the front and approx. 200 mm from the rear chamfer Spare wheel holder for 1 spare wheel, upright on the gooseneck, front center; spare wheel: same make as main tyres, steel rim Storage box recessed in the gooseneck floor with lid, W = 720 mm / L = 520 mm / D = 170 mm 1st pair of wheel recesses after the gooseneck, set into the low-bed area, inclined entry, inside length approx. 1,600 mm, approx. 400 mm deep. Note: Main frame in this area is 400 mm higher than the wheel recess. 2nd pair of wheel recesses between the axles in the low-bed area, inclined entry, inside length approx. 600 mm, approx. 300 mm deep. Note: Main frame in this area is 300 mm higher than the wheel recess. Extendable load width: up to 3,000 mm (extension not available at rear bevel and in the wheel recesses), (tread width of construction machinery or vehicles to be transported must not exceed the external frame width of 2,550 mm) Wooden plank storage compartment underneath the low-bed area 70 mm wooden planks for extension up to 3,000 mm Lashing Equipment - Low-bed trailer 1 pair of ring lashing eyes recessed in the gooseneck, 5 t each 4 pairs of lashing holes in the outer frame, 5 t each (for fastening straps) 8 pairs of lashing mushrooms recessed in the top and side edges of the outer frame, 10 t each 2 x at the front on the gooseneck 6 x in the low-bed area The first lashing point is 250 mm from the front and the last max. 250 mm from the rear, distance between lashing points not exceeding 1,100 mm 5 pairs of stanchion pockets recessed in the outer frame, internal dims: 70 x 40 mm (can be retrofitted to 5 t ring lashing eyes, not included) 1 pair of foldable lashing eyes additionally recessed in the floor, 10 t each 1 x inside next to main frame at start of low-bed 2 pairs of additional foldable lashing eyes, 10 t each 1 x on the gooseneck (protruding) 1 x recessed in the floor behind the last axle Towing Equipment – Trailer turntable Drawbar with certified 50 mm towing eye, 8° inclined D-Value min. 160 kN Axles & Suspension BPW drum brake axles "Axle/chassis laser alignment" reduces tyre wear and fuel consumption Parabolic spring suspension with maintenance-free steel-rubber bushings and mechanical front axle load equalisation (rocker axle equalisation) Wheels and Tyres 235 / 75 R 17.5" According to manufacturer's choice, with