Faymonville F-S43-1Aaf Max 100 kúpiť použité (34 972)

Stav: nový, maximálna hmotnosť nákladu: 48 300 kg, celková hmotnosť: 71 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Excerpt from the equipment. Complete equipment details available upon request. GOOSENECK: * Gooseneck with integrated single-axle running gear (pendulum axle) in removable design * Gooseneck hydraulically liftable and lowerable, including hydraulic connection linked with the hydraulic axle compensation of the first axles * Length: approx. 5,200 mm, with a front bevel of approx. 60° * Fifth wheel load according to data sheet: W25-DSR2700-12/22.7 * For tractor units: 6x4 or 8x4 * Front steel bulkhead, removable, approx. 400 mm high, in beveled design * 1 pair mechanical landing legs at the front of the gooseneck * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets * 1 spare wheel carrier inside on the front wall of the gooseneck with a crane arm * 2 pairs of flush-mounted lashing rings on the gooseneck (LC 2,500 daN) * 2 pairs of flush-mounted lashing rings in the front external frame of the running gear, fold-out to the outside (LC 10,000 daN) * 1 pair of lashing rings at the transition from the running gear to the loading platform (LC 10,600 daN) * On the gooseneck: 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized finish * On the gooseneck: 1 plug-in aluminum rear board, approx. 400 mm high, anodized finish * 3.5-inch kingpin * TPMS tire pressure monitoring system according to ECE R 141 * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * 1 INOX tool box with 1 lid, mounted on the gooseneck to the right in the direction of travel by the aluminum side wall, approx. 1,350 x 400 x 400 mm (L x W x H) LOADING PLATFORM: * Low bed with externally mounted beams, designed as a telescoping low-height loading platform with a front extension including a fixed approx. 50 mm thick hardwood floor * Length x width approx. 8,000 mm x 2,740 mm * Mechanical bolt and clevis coupling from low bed to running gear for swapping the loading platform or installing extension beams * Locking position approximately every 500 mm on the extension * 4 pairs of flush-mounted lashing rings set into the loading platform, distributed along the external frame (LC 10,000 daN) * 1 lashing ring each left and right on the rear cross member (LC 10,000 daN) * Fold-out extensions, approx. 230 mm per side (WITHOUT wooden planks) * Loose extension planks, steel-framed * Prepared for installation of bolt-on container locks for 1x 20' or 1x 40' container on the side beams. Without container locks * 6 pairs of threaded blocks between the lashing rings under the upper flange on the side beams for mounting M24 lashing eyes (LC 8,000 daN) * 2 pairs of M24 lashing eyes (LC 8,000 daN) included REAR RUNNING GEAR: * Rear running gear with closed external frame, checker plate covering, and continuous prism excavator recess, approx. 1,450 x 900 x 505 mm, open at the rear * Pendulum axles, all axles hydro-mechanically force-steered * Hose rupture valve on the axle equalizing cylinders with automatic reset function * Hydraulic cylinders with shut-off valves and pre-insert for securing in raised position * Axles finish-painted with 2 layers of 2K paint, plain in DB 7350 Novagrau * Technical axle load: 12,000 kg each * Hydraulic axle compensation Ijdpfxjyhkqno Aiasia * 245/70 R 17.5 3PMSF. Brand at our discretion * Remote steering from front and rear via cable remote control, with axle alignment control, no installation in the tractor

Stav: nový, maximálna hmotnosť nákladu: 36 400 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment. Full specification available on request. Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long, with rear taper approx. 1,000 mm x 6° * For tractor units: 4 x 2 and 6 x 2 * ASPÖCK-UNIBOX at the front junction box with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic unit for controlling hydraulic functions, except for hydraulic winches. Without installation of supply connections on the tractor unit * Gooseneck outer beams with mounting holes for screw-in lashing rings. The first hole approx. 200 mm from the front, then approx. every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) * One mounting hole at the top rear of the gooseneck’s outer beams for a screw-in lashing ring * 1 pair of screw-in lashing rings included (LC 10,000 daN) * 3 pairs of recessed lashing rings inside the gooseneck outer beam (LC 5,000 daN) * 3 pairs of recessed lashing rings in the middle of the gooseneck (LC 5,000 daN) * 1 pair of recessed lashing rings at the rear center of the gooseneck (LC 5,000 daN) * Grating surface with 5 mm steel plate reinforcement on the gooseneck and rear taper * 2'' kingpin * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * Spiral cable (approx. 35 mm², approx. 3.5 m) to supply the electro-hydraulic unit and/or electric winch between trailer and tractor unit with plug (NATO-NATO) * 1 pair of removable ALU sideboards on the gooseneck, approx. 400 mm high, anodized finish LOADING PLATFORM: * Loading platform, approx. 9,600 mm long, with rear taper approx. 900 mm x 6° * Section after gooseneck hydraulically liftable and lowerable, approx. 3,000 mm, load capacity up to approx. 9,000 kg * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle rear steering. 3rd axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: each 12,000 kg * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires, brand of our choice, load index 143/141J (144/144F) * Mechanical landing gear with 2-speed gearbox and crank * Continuous grating surface with approx. 5 mm steel plate reinforcement for extra strength, designed for point loads: on the lift bed and on the loading platform * Painted sand coating on the cover plates of the gooseneck as well as transition areas between neck and lift bed, lift bed and loading platform, as well as between loading platform and ramps * 1 mounting adapter for spare wheel under the loading platform on the right in front of axles * Cut-outs in the outer frame of the loading platform and lift bed for hanging tie-down straps (LC 2,000 daN) * 11 pairs of recessed fold-out lashing rings in the outer frame of the loading platform (LC 10,000 daN): - 3 pairs in the outer frame of the lift bed - 8 pairs in the outer frame of the loading platform * 11 pairs of recessed lashing rings along the central beam (LC 5,000 daN): - 3 pairs in the lift bed - 8 pairs in the rear section of the loading platform * Control valves for the hydraulic ramps on the right side of the vehicle * 1 pair of foldable mechanical rear supports, single-hand operation HYDRAULIC LOADING RAMPS: Iijdpsyhkqusfx Aiaoa * 1 pair of two-piece AXS steel ramps with length approx. 4,920 mm and a

Stav: nový, pohotovostná hmotnosť: 9 450 kg, maximálna hmotnosť nákladu: 35 550 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 500 mm, šírka ložného priestoru: 1 560 mm, celková šírka: 2 550 mm, veľkosť pneumatiky: 385/65 R 22,5, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck designed as load platform with aluminium chequer plate covering - Front edge bevelled at approximately 45° - Hydraulic lifting rocker, approx. -280/+250 mm lift and lower range - Two king pin positions at centres 2,300 mm and 2,000 mm Iodpfoygvc Hjx Aiasia - Suitable for tractor units: 4x2, 6x2 or 6x4 Loading bay: - Loading bay, approx. 9,500 mm length, equipped with bottom-mounted angle profiles for pallet loading (distance king pin to centre of axle assembly approx. 8,000 mm) Axles, suspension and tyres: - BPW axle stubs with drum brakes and independent wheel suspension, hydraulic axle balancing with lifting and lowering function - Lowering safety devices on the axles in case of air spring rupture, designed for maximum pallet height of 150 mm - Tyres: 385/65 R 22.5 - TPMS tyre pressure monitoring sensors fitted in all wheels including spares - TPMS system compliant with ECE R 141 Surface treatment: - Complete steel construction wheelabrated after welding - Second abrasive blasting with corundum for optimum coating adhesion - Full chassis HRM metallised with ZINACOR 850 (85% zinc/15% aluminium) to ensure premium corrosion protection - Final paint finish with two coats of two-component topcoat, solid colour in Nova Grey (DB 7350) - Paint structure tested by salt spray test in accordance with ISO 9227-NSS, cavity sealing with special wax Standard accessories included: - Plug-in steel headboard, approx. 400 mm high - Toolbox with lid, countersunk at rear of gooseneck, approx. 640 x 700 x 215 mm - Removable ALU rear panel on gooseneck, approx. 400 mm high, anodised - One pair of foldable ALU sideboards on gooseneck, approx. 400 mm high, anodised - 2" king pin - 3 pairs of recessed lashing rings on gooseneck (LC 6,300 daN) - Front connection panel fitted with yellow-red air couplings, illumination for operating gooseneck, suspension and hydraulic tensioning with on/off switch - Mechanical drop-leg supports for approx. 48,000 kg support load - Access ladder mounted at front right with 2 removable handrails - WABCO Roll Stability Support (RSS) - 9 pairs of lashing rings on main beams (LC 6,300 daN) - Main beams with flush-fit grating deck between load securing guide rails - Hydraulic pre-installation including control unit for mounting 3 pairs of our hydraulic load securing devices - First and last axles liftable manually left and right - Storage box behind axle assembly, left and right, splashproof - Rear bevel for easier pallet insertion - Rear crossmember fitted with eyes for mechanical load restraining - 7-pin socket at rear crossmember - Electro-hydraulic power unit - 4 wheel chocks with holders - 2 axle load gauges fitted on left, including axle load diagram - 3 pairs of hydraulic load securing arms, pivoting and adjustable on main beams - Rear door with diagonal bracing, hinged left, hydraulically locked right, can be locked horizontally at 90°, 105° and 270° - Folding underrun protection for transport of max. 4 empty standard pallets - 1 spare wheel - Number plate bracket with illumination, rear left on trailer - Round NATO socket at front connection panel (Maeler & Kaege VG 96 917) - Central lubrication system with 1 pump, BEKAMAX make, standard grease version

Stav: nový, maximálna hmotnosť nákladu: 67 200 kg, celková hmotnosť: 85 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, You can find our complete vehicle inventory, including immediately and soon-available vehicles, on our website. Excerpt from equipment. Full specification available on request. GOOSENECK * Gooseneck in SNT design to optimize platform length, approx. 3,700 mm long, rear tapered approx. 1,000 mm x 10° * For tractors: 6x2, 6x4, and 8x4 short wheelbase * Steel front wall, removable, approx. 400 mm high * 3 kW electro-hydraulic power pack for controlling hydraulic operations, except for hydraulic winches * Outer beams of gooseneck with mounting holes for bolted lashing rings Iedporgzv Nefx Aiasia * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of removable ALU side walls, approx. 400 mm high, anodized * 1 removable ALU rear wall, approx. 400 mm high, anodized * Over the gooseneck, approx. 40 mm thick hardwood floor; over the king pin, checker plate floor * 3.5-inch king pin * Guide plate from gooseneck for fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow control, incl. cabling bracket for supply lines (Faymonville couplings) * 2 pairs of stake pockets recessed into the gooseneck for approx. 100 x 50 mm plug-in stakes PLATFORM * Extendable platform, approx. 11,000 mm long, rear tapered approx. 500 mm x 10° * Pneumatic locking with conical lock bolts and reinforced lock positions; supply lines protected within the extendable rails and automatically adjust to the platform length * BPW axles and suspension, 1st axle steered ahead, 2nd axle fixed, all other axles hydraulic-mechanical forced steering * 1st axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with raise/lower valve * Tires: 235/75 R 17.5 3PMSF twin tires * Mechanical landing gear with two-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Platform with continuous and between the axles interrupted approx. 50 mm thick hardwood flooring (increases friction coefficient) * Long holes for attachable and repositionable bridging elements: – at the fixed section behind the gooseneck – at the front of the platform * 1 sliding intermediate platform, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate floor, front and rear with long holes for attachable and movable bridging elements * 1 pair of recessed flat lashing rings in the fixed front platform section (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the platform, folding outward (LC 10,000 daN) * 1 pair of mechanical rear supports * Steering from front and rear operated via cable remote control, with single-track alignment of the axles, without installation in the tractor * 1st axle with automatic lift-axle function and starting aid in accordance with EU regulation 2021/535 * Under the gooseneck and at the rear cross-member, left and right, each with a 7-pin socket and holder for warning plates * Painted sand coating on the outer frame of the platform as well as on the checker plates and the transition area between the platf

Stav: nový, maximálna hmotnosť nákladu: 25 300 kg, celková hmotnosť: 38 000 kg, konfigurácia náprav: 2 nápravy, celková šírka: 2 540 mm, Výbava: ABS, You can find our complete stock of vehicles, including those available immediately or at short notice, on our website. Selection of equipment. Full equipment details available upon request. Gooseneck * Gooseneck in SNT design to optimize loading platform length * Length approx. 3,750 mm, hydraulically liftable/lowerable and detachable gooseneck * Technical fifth wheel load: 25,000 kg. Suitable for tractors: 4 x 2 and 6 x 2 Beam Deck * Lowbed designed as an extendable vessel bridge in SUPER LOW design * Length approx. 6,850 mm * With mechanical locking * Supply lines are protected within the extendable beams and automatically adjust to the respective lowbed length Rear Chassis * Short version with closed outer frame and checker plate covering * Chassis includes an excavator trough, which is closed at the rear half to accommodate the air tanks Axles * BPW axles and suspension, all axles hydro-mechanically forced steered * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve Tyres * GOODYEAR KMAX T 3PMSF (M+S) 245/70 R 17.5 twin tyres. Load index 143/141J (146/146F) Braking System * Brand: WABCO, EBS-E according to EU regulations, WITHOUT connecting cable to the tractor unit Paintwork * 6-stage final treatment * Complete steel structure shot-blasted after welding * 1 coat of zinc primer * 1 coat of adhesion primer. Final paint with 2 coats of 2-pack (acrylic) paint in a single color, followed by cavity sealing with special wax Trailer Color Iodpov Sw E Ajfx Aiaoia * RAL 3002 Carmine red * Rim color: Silver grey * Side wall color: Natural aluminum Included Accessories * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit to control hydraulic operations, except for hydraulic winches. Without installation of supply connections on the tractor * Mounting adapter for 1 spare wheel in front of the gooseneck's front wall * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings. The first hole approx. 200 mm from the front, then approx. every 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring each left and right on the rear bevel of the gooseneck (LC 6,000 daN) * 2" king pin * Hydraulic crossbeam to support the gooseneck on the tractor unit or a dolly * Air connection with air gun on the gooseneck * 1 pair of steel ramps with climbing profiles and locking bolts to bridge the lowbed's hooks * 1 lashing ring each left and right on the front cross member (LC 10,000 daN) * On the outer beams of the loading platform, preparation for removable floor panels * Lashing rings with retaining spring approx. every 1,200–1,300 mm outside on the inner beams of the platform * Lashing rings with retaining spring approx. every 1,200–1,300 mm outside on the outer beams of the loading platform (LC 10,000 daN) * Cut-outs on the top flange of the outer beams above the lashing rings * Mechanical pin-tab coupling from lowbed to chassis for exchangeable loading platform or installation of extension beams. Includes electro-pneumatic-hydraulic couplings * Outer beams of the lowbed coated with non-slip sand layer * 2nd driving height for upper drive position, max. ±50 mm from normal driving position, without controls installed on the tractor * 1 pair of lashing rings with retaining spring at the transition from the lowbed to the excavator trough (LC 10,000 daN) * Bevel front and rear a

Stav: nový, maximálna hmotnosť nákladu: 50 400 kg, celková hmotnosť: 65 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, Our complete stock of vehicles, including those available for immediate or short-term delivery, can be found on our website. Excerpt from the equipment. Full equipment details available upon request. GOOSENECK * Gooseneck in SNT design to optimize loading deck length, approx. 3,700 mm long, rear with chamfer approx. 1,000 mm x 10° * Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4 * Plug-in steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection strip with sockets * 3 kW electro-hydraulic power pack for hydraulic functions, except for hydraulic winches * 1 pair of plug-in aluminum side walls, approx. 400 mm high, anodized finish * One plug-in aluminum rear wall, approx. 400 mm high, anodized finish * Approximately 40 mm thick hardwood floor covering over gooseneck, checker plate covering over king pin * 2-inch king pin * Rear part of gooseneck with mount for aluminum loading ramps * Round NATO socket on the front connection strip (Maeler & Kaege VG 96 917) LOADING PLATFORM * Extendable loading platform, approx. 8,800 mm long, with rear chamfer approx. 500 mm x 10° * Recess in the platform and into the chamfer for receiving excavator dipper stick, approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system according to ECE R 141 * BPW axles and suspension, first axle with forced steering, all other axles with hydro-mechanical forced steering * First axle with electromagnetically activated reverse lock, activated via reverse gear and manual control Iisdpfstx Nwnsx Aiasa * Technical axle load: 12,000 kg each, air suspension with lift/lower valve * Twin tires 235/75 R 17.5 3PMSF * Mechanical landing legs with 2-speed gearbox and crank, JOST Modul B – static test load approx. 50,000 kg * Continuous hardwood floor covering approx. 50 mm thick on loading platform and interrupted between axles (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Extendable (galvanized) side extensions approx. 230 mm per side (without wooden planks) * Wheel recesses with square climbing strips, approx. 15 x 15 mm in front of axles, open to the cross member of the gooseneck, approx. 700 x 410 mm (W x D) * Aluminum covers for wheel recesses, also usable as bridging elements for the extendable platform OR as extension planks * Aluminum elements lockable onto the extendable pipes of the extensions * Extendible U-profiles for inserting the aluminum covers: – on the fixed part behind the gooseneck – at the intermediate table – on the extendable platform * Wheel recesses with square climbing strips, approx. 15 x 15 mm between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * Aluminum covers for wheel recesses, also usable as bridging elements for the extendable platform OR as extension planks * Aluminum elements lockable onto the extendable pipes of the extensions * 1 pair of mechanical rear supports * Remote steering from the front and rear via cable remote control, with single-track monitoring of axles, without installation in the tractor unit HYDRAULIC LOADING RAMPS * One pair of two-piece steel ramps, type: DR-15/60-900-4350-KG-HV-M, approx. 4,350 mm long and approx. 900 mm wide * Hydraulically foldable ramp tips * Ramps can be hydraulically shifted individually approx. 235 mm outward and approx. 215 mm inward * Super Grip rubber flooring approx. 25 mm and steel flooring approx. 5 mm as additional

Stav: použitý, maximálna hmotnosť nákladu: 51 870 kg, celková hmotnosť: 65 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 03/2025, ďalšia kontrola (TÜV): 03/2026, celková šírka: 2 540 mm, Výbava: ABS, You can find our entire range of vehicles, including models available immediately or on short notice, on our website. Excerpt from the equipment. Complete specification available on request. GOOSENECK • Gooseneck in SNT design for optimized load deck length, approx. 3,700 mm long, rear with chamfer approx. 1,000 mm x 10° • For tractor units: 4 x 2, 6 x 2 and 6 x 4 • Plug-in steel front wall, approx. 400 mm high • Yellow-red air couplings on the front connector rail • ASPÖCK-UNIBOX at the front connector rail with 24N, 24S & 15-pin sockets • 3 kW electro-hydraulic unit for controlling the hydraulic functions • External beams of gooseneck with mounting holes for bolted lashing rings • One mounting hole at the upper rear section of the gooseneck’s external beams for a bolted lashing ring • 1 pair of screw-in lashing rings included (LC 10,000 daN) • 1 pair of plug-in aluminium side walls, approx. 400 mm high, anodized, on the gooseneck • 1 plug-in aluminium rear wall, approx. 400 mm high, anodized, on the gooseneck • Approx. 40 mm hardwood decking on the gooseneck • 2-inch king pin • Gooseneck guide plate for the fifth wheel, approx. 500 mm wide • Mount at the rear section of the gooseneck for aluminium loading ramps • Round NATO socket at the front connector rail (Maeler & Kaege VG 96 917) LOADING DECK • Extendable loading deck, length approx. 8,800 mm, rear chamfer approx. 500 mm x 10° • Recess in the loading deck as well as in the chamfered area for accommodating an excavator dipper stick approx. 2,490 x 750 x 210/290 mm (L x W x H) • TPMS tyre pressure monitoring system according to ECE R 141 • BPW axles and suspension • 1st and 2nd axle rigid, 3rd and 4th axle self-steering • 3rd and 4th axle with electromagnetic reversing lock, can be activated via reverse gear and manually • Technical axle load rating: 12,000 kg each • Air suspension with lifting and lowering valve Iisdextc Uhopfx Aiaea • 235/75 R 17.5 twin tyres, 3PMSF • Mechanical landing gear with 2-speed gearbox and crank, JOST Modul B - static test load = approx. 50,000 kg • Continuous hardwood decking (approx. 50 mm) on the loading deck and interrupted between axles (increases coefficient of friction) • Loading deck locked with tapered welded locking profiles every approx. 250 mm • Long holes for attachable and repositionable bridging elements at the front of the loading deck • Intermediate platform with stepped loading deck, approx. 300 mm wide, for extraction tube with large cross-section, with steel covering – front and rear with long holes for attachable and repositionable bridging elements – removable cover flush with the loading deck • 1 pair of lashing rings on the front crossmember (LC 10,000 daN) • 6 pairs of recessed lashing rings in the outer frame of the loading deck, foldable outward (LC 10,000 daN) • Additionally, 1 pair of lashing rings externally on the front crossmember of the loading deck, approx. 90° rotated inward towards the loading deck (LC 10,000 daN) • Extendable bolted steel extensions (galvanized), approx. 230 mm per side • 1 pair of fixed open wheel recesses up to extension, approx. 700 x 410 mm (W x D), in the loading deck ahead of the 1st axle; wheel recesses with steel covering and square climbing bars approx. 15 x 15 mm, every approx. 200 mm • Between 2nd and 3rd axles in the loading deck, 1 pair of fixed wheel recesses, approx. 1,695 x 700 x 410 mm (L x W x D); covers for wheel recesses split longitudinally, with wooden top, outer with plug-in locking...

Stav: použitý, celková hmotnosť: 39 500 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 07/2022, dĺžka ložného priestoru: 13 400 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 890 mm, Rok výroby: 2022, Výbava: ABS, lfd 12389 LOWBED TRAILER MAX TRAILER 3-axle F-S43-1AAF / EXTENDABLE 4500 mm / STEERABLE AXLE Manufacturer: MAX TRAILERS First registration: 07/2022 Dimensions: 13,400 x 2,540 x 890 mm Perm. total weight: 49,500 kg Unladen weight: 10,284 kg Payload: approx. 38,000 kg Fifth wheel load: 18,000 kg Air suspension, lift/lower function Drum brakes ABS EBS Mileage: 142,000 km Axle manufacturer: BPW 10.5 t Lift axle Steering axle Trailing steer axle Lashing rings Superstructure paint: red Chassis paint: GALVANIZED/RED Tyres: 12 units Tyre tread depth: 7 – 10 mm Rear axle tyres 235/75 R17.5 MAX = FAYMONVILLE MAX 100 Ideal for concrete slabs / timber panels / precast concrete elements, etc. Ramp length 1200 mm / hardwood floor Rear loading edge 890 mm Lowered 840 mm Ijdpfx Asy Ag Adsiaeia Container locks for: 1 x 40/30ft and 20ft containers Incl. 4 x twistlocks Stanchion pockets and 5 t lashing rings on the loading area EXTENDABLE by 4,500 mm in 500 mm increments Central table can be removed TRAILING STEER AXLE ALUMINIUM AIR TANK / HOT-DIP GALVANIZED EXCELLENT CONDITION!!!! Currently, sample pictures from 06/2025 All information subject to change and prior sale! If you have any questions regarding this or other vehicles, please give us a call.

Stav: nový, konfigurácia náprav: 3 nápravy, povolené zaťaženie nápravy (náprava 1): 12 000 kg, dovolené zaťaženie nápravy (náprava 2): 12 000 kg, povolené zaťaženie nápravy (náprava 3): 12 000 kg, celková dĺžka: 17 700 mm, celková šírka: 2 990 mm, celková výška: 3 810 mm, zavesenie: hydraulika, veľkosť pneumatiky: 245/70 R17.5 Double Fitted (143/141J), farba: červená, Rok výroby: 2024, Výbava: zdvíhacie čelo, Color: Red Payload: 100,250 kg Weights: Kingpin load: 38,000 kg Axle load: 12,000 kg Total axle load: 96,000 kg Gross vehicle weight (GVW): 134,000 kg Unladen weight: 33,750 kg Payload capacity: 100,250 kg Axles: Axle make: BPW ECO PLUS Hydraulic suspension 7 axles with steering (2nd axle fixed) First two axles liftable Drum brakes Brake type SN 3020 for ABS, with sensors Tyres: 245/70 R17.5, twin tyres Load index 143/141J Dimensions: Length: 17,700 mm Extensions: 19,500 mm Maximum extended length: 37,900 mm Load bed width: 3,990 / 3,450 mm Load bed height: 1,050 mm +/- 150 mm Overall height: 3,815 mm Additional equipment: NATO plug Hydraulically folding ramps Outriggers with planks for load bed extension Electro-hydraulic pump for trailer functions Spare wheel with bracket Work lights Rear underrun protection with lights 2.0” kingpin Central lubrication Lashing rings Wooden loading floor Wide load marker boards Remote control General information Year of manufacture: 2024 Axle configuration Tyre size: 245/70 R17.5 twin (143/141J) Axle brand: BPW ECO PLUS Brakes: drum brakes Suspension: hydraulic suspension Rear axle 1: twin wheels; lift axle; max axle load: 12,000 kg; steered; tyre tread left inside: 100%; tyre tread left outside: 100%; tyre tread right inside: 100%; tyre tread right outside: 100% Rear axle 2: twin wheels; lift axle; max axle load: 12,000 kg; tyre tread left inside: 100%; tyre tread left outside: 100%; tyre tread right inside: 100%; tyre tread right outside: 100% Rear axle 3: twin wheels; max axle load: 12,000 kg; steered; tyre tread left inside: 100%; tyre tread left outside: 100%; tyre tread right inside: 100%; tyre tread right outside: 100% Rear axle 4: twin wheels; max axle load: 12,000 kg; steered; tyre tread left inside: 100%; tyre tread left outside: 100%; tyre tread right inside: 100%; tyre tread right outside: 100% Rear axle 5: twin wheels; max axle load: 12,000 kg; steered; tyre tread left inside: 100%; tyre tread left outside: 100%; tyre tread right inside: 100%; tyre tread right outside: 100% Rear axle 6: twin wheels; max axle load: 12,000 kg; steered; tyre tread left inside: 100%; tyre tread left outside: 100%; tyre tread right inside: 100%; tyre tread right outside: 100% Rear axle 7: twin wheels; max axle load: 12,000 kg; steered; tyre tread left inside: 100%; tyre tread left outside: 100%; tyre tread right inside: 100%; tyre tread right outside: 100% Rear axle 8: twin wheels; max axle load: 12,000 kg; steered; tyre tread left inside: 100%; tyre tread left outside: 100%; tyre tread right inside: 100%; tyre tread right outside: 100% Weights Unladen weight: 33,750 kg Payload: 100,250 kg GVW: 134,000 kg Functional features Load floor height: 105 cm Iiedpfxouu E Tio Aiaea Extendable body: Yes Condition Overall condition: very good Technical condition: very good Visual condition: very good Financial information Price: On request Further information Please contact Stefan Schaapveld for more information...

Stav: použitý, farba: zelený, Rok výroby: 2018, Faymonville F-S42-2ACB Baujahr: 2018 12-Tonnen Pendel-X-Achsen Max. Gesamtgewicht: 49.000 kg Sattellast: 25.000 kg Hydraulisch abfahrbares Schwanenhals Hydraulik funktioniert über NATO-Anschluss vom Lkw EBS, ABS, ALB Reserverad Hydraulische Federung Fernbedienung mit Kabel Aluminium-Bordwände und Werkzeugkasten auf dem Schwanenhals 5,5 m ausziehbar 2 x 25 cm verbreiterbar Baggerbrücke: 2.750 x 600 mm Feuerverzinkt Abmessungen: Schwanenhals: L: 3.650 mm B: 2.500 mm H: 1.550 mm Sattelhöhe: 1.250 mm Ladefläche: L: 8.000 mm B: 2.550 mm H: ca. 350 mm Bodendicke: 220 mm Heck des Aufliegers: L: 2.750 mm B: 2.550 mm H: 1.000 mm Bereifung: 245/70R17,5 80 % Profil Deutscher Auflieger! ID NR: 465 Iisdpfsy A Ehlsx Aiasa Die Allgemeinen Geschäftsbedingungen der Heinhuis gelten für alle Anzeigen, Angebote und Kostenvoranschläge von Heinhuis, alle von Heinhuis abgeschlossenen Verträge sowie die diesen vorangehenden Verhandlungen. Mit jeder Form der Reaktion akzeptieren Sie die Geltung der Allgemeinen Geschäftsbedingungen und bestätigen, dass Sie diese zur Kenntnis genommen haben. Unsere Preise sind Netto-Exportpreise. = Weitere Informationen = Baujahr: 2018 zGG: 49.000 kg Ausziehbarer Aufbau: Ja Preis: Auf Anfrage = Firmeninformationen = Für weitere Informationen: WhatsApp:

Stav: použitý, farba: červená, Rok výroby: 2018, Faymonville F-S42-2GXX. Rok výroby: 2018. 12t osy Pendel-X. Maximální hmotnost: 49 000 kg. Zatížení na čepu: 25 000 kg. Výsuvný rám o 5,5 metru. 2 x 25 cm rozšíření včetně nástavců. Ijdey Ay S Eepfx Aiaeia Pozinkováno. Hydraulicky odnímatelný krk. Hliníkové bočnice na krku. Hydraulické odpružení. Dálkové ovládání rádiem. Bagrový most: 3050 mm x 700 mm. 3 vyjímatelné podlahové desky. Hydraulika přívěsu pracuje na napětí NATO. Rozměry: Krk: Délka: 3 700 mm Šířka: 2 500 mm Výška: 1 500 mm Výška čepu: 1 250 mm Podlaha: Délka: 6 850 mm Šířka: 2 550 mm Výška: 400 mm Tloušťka podlahy: 230 mm Zadní část přívěsu: Délka: 3 050 mm Šířka: 2 550 mm Výška: 950 mm Pneumatiky: 245/70R17,5, 60% vzorku. ID číslo: 494. Všeobecné obchodní podmínky společnosti Heinhuis platí pro všechny inzeráty, nabídky a cenové nabídky společnosti Heinhuis, pro všechny uzavřené smlouvy a i pro jednání, která jim předcházela. Jakoukoli odpovědí potvrzujete platnost VOP společnosti Heinhuis a prohlašujete, že jste se s těmito VOP seznámili. Naše ceny jsou netto ceny pro export. = Další informace = Rok výroby: 2018 Celková povolená hmotnost: 49 000 kg Výsuvná nástavba: Ano = Informace o firmě = Pro více informací: WhatsApp:

Stav: použitý, farba: modrá, Rok výroby: 2017, Faymonville F-S42-1ACA. Rok výroby: 2017. Nápravy SAF 11,2 tony. Hmotnosť: 12 110 kg. Nosnosť: 25 890 kg. Maximálna hmotnosť: 38 000 kg. Zaťaženie na čap: 18 000 kg. EBS, ABS, ALB. Hydraulika z návesu s prevádzkou na NATO. Hydraulicky odpojiteľný husí krk. Vzduchové odpruženie. Náhradné koleso. Riadené nápravy (servořízení). Rádiové diaľkové ovládanie. Výsuvné spinbed-baggerbed do 5 metrov. Rozmery: Krk: Dĺžka: 4 000 mm Šírka: 2 550 mm Výška: 1 550 mm Výška čapu: 1 200 mm Podlaha: Ijdpfx Aiey Ay N Rsajia Dĺžka: 6 300 mm Šírka: 1 000 - 2 540 - 3 000 mm Výška: 450 mm Hrúbka podlahy: 300 mm Zadná časť návesu: Dĺžka: 2 800 mm Šírka: 2 550 mm Výška: 950 mm Pneumatiky: 235/75R17,5 80% K dispozícii 2 kusy! Nemecký náves! ID NR: 596. Na všetky inzeráty, ponuky a cenové ponuky spoločnosti Heinhuis, všetky uzatvorené zmluvy a predchádzajúce rokovania sa vzťahujú Všeobecné obchodné podmienky Heinhuis. Odozvou na túto ponuku akceptujete použitie týchto obchodných podmienok a zároveň potvrdzujete, že ste sa s nimi oboznámili. Naše ceny sú netto ceny pre export. = Ďalšie informácie = Rok výroby: 2017 Prevádzková hmotnosť: 12 110 kg Nosnosť: 25 890 kg Výsuvná plošina: Áno = Informácie o firme = Pre viac informácií: WhatsApp:

Stav: nový, maximálna hmotnosť nákladu: 39 600 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, celková výška: 860 mm, MAX Trailer Type 100 NEW | Extendable | 39t payload | 3 axles | from €66,900 New vehicle – individually configurable for your specific application. High payload capacity thanks to robust construction and maximum cost-effectiveness. ----Highlights: • Approx. 39,600 kg payload • Loading platform: 8,600 mm + 5,400 mm extendable • Ramp load capacity up to 40,000 kg • BPW axles with air suspension • WABCO EBS braking system ----Technical Data: • Gross vehicle weight: 49,500 kg • Tare weight approx.: 9,866 kg • Loading height at max. load: approx. 860 mm Iijdpeypa Npsfx Aiasa • Overall width: 2,540 mm • Speed: 80 km/h ----Standard Equipment: • Extendable loading platform with durable hardwood floor • Galvanized steel ramps with hydraulic lifting system • High-strength steel construction with long-lasting corrosion protection • LED lighting system • JOST landing legs with 2-speed gearbox • Tire pressure monitoring system (TPMS) ----Included Options: • Spare wheel with holder • Galvanized front wall (approx. 400 mm) • Electro-hydraulic unit mounted under the loading platform • Extendable warning signs with LED • Reflective tape according to EU regulations • Beacon mount at rear • Ramp control valves on right-hand side Further equipment and individual customization available on request – we configure your vehicle to meet your exact requirements. Sample photo. Equipment may vary depending on configuration.

Stav: veľmi dobrý (použitý), konfigurácia náprav: 3 nápravy, povolené zaťaženie nápravy (náprava 1): 12 000 kg, dovolené zaťaženie nápravy (náprava 2): 12 000 kg, povolené zaťaženie nápravy (náprava 3): 12 000 kg, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 1 550 mm, celková dĺžka: 13 600 mm, celková šírka: 2 540 mm, celková výška: 1 550 mm, zavesenie: vzduch, veľkosť pneumatiky: 275 / 70 R22.5 – Good Year, farba: červená, Rok výroby: 2024, Colour: Red Loading capacity: 60,800 kg Extendable Main Features Manufacturer: Faymonville Model: F-S44-1BBY Triple Extendable Flatbed Chassis number: YAFSR4009S0036724 Year: NEW / Unused Weights / Loading Capacity Fifth wheel load: 28,000 kg Axle load: 12,000 kg Total axle load: 48,000 kg GVW: 76,000 kg Tare weight: 15,200 kg Iiodsv I Dqqjpfx Aiaea Payload: 60,800 kg Axles Axle make: BPW Air suspension All axles with hydraulic steering WABCO braking system with EBS Tyres: 275 / 70 R22.5 – Goodyear Load index: 148/145M Dimensions Length: 13,600 mm Extensions: 7,200 mm + 7,400 mm + 7,600 mm Maximum extended length: 35,800 mm Load floor width: 2,540 mm Height: 1,550 mm (+/- 100 mm) Additional Information High resistance metallization of the steel construction NATO plug Lashing rings Stake pockets Wooden loading floor Mechanical landing gear Electro-hydraulic pump for trailer functions Spare wheel Rear bumper with lights Fifth wheel coupling: 2.0” + 3.5” Central greasing system with 2 BEKAMAX pumps = Additional Information = General Information Year of manufacture: 2024 Axle Configuration Tyre size: 275 / 70 R22.5 – Goodyear Axle make: BPW Suspension: Air suspension Rear axle 1: Twin tyres, Max. axle load: 12,000 kg, Steered, Tyre tread left inner: 100%, left outer: 100%, right inner: 100%, right outer: 100% Rear axle 2: Twin tyres, Max. axle load: 12,000 kg, Steered, Tyre tread left inner: 100%, left outer: 100%, right inner: 100%, right outer: 100% Rear axle 3: Twin tyres, Max. axle load: 12,000 kg, Steered, Tyre tread left inner: 100%, left outer: 100%, right inner: 100%, right outer: 100% Rear axle 4: Twin tyres, Max. axle load: 12,000 kg, Steered, Tyre tread left inner: 100%, left outer: 100%, right inner: 100%, right outer: 100% Weights Tare weight: 15,200 kg Payload: 60,800 kg GVW: 76,000 kg Functional Loading platform height: 155 cm Extendable body: Yes Condition Technical condition: Very good Visual condition: Very good Further information Please contact Stefan Schaapveld for further details.

Stav: dobrý (použitý), konfigurácia náprav: 3 nápravy, povolené zaťaženie nápravy (náprava 1): 10 500 kg, dovolené zaťaženie nápravy (náprava 2): 10 500 kg, povolené zaťaženie nápravy (náprava 3): 10 500 kg, prvá registrácia: 11/2022, celková dĺžka: 13 900 mm, celková šírka: 2 550 mm, celková výška: 2 400 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 17.5, rázvor náprav: 2 300 mm, Rok výroby: 2022, Výbava: ABS, = Ďalšie možnosti a príslušenstvo = - EBS (elektronický brzdový systém) - Zadné vzduchové odpruženie - Rezervné koleso = Poznámky = - Faymonville / Max Trailer 3-nápravový nízkoložný náves (typ: MAX100) - Rozmery ložnej plochy: dĺžka 930 cm x šírka 254 cm - Rozťahovateľný na: 1280 cm (+ 350 cm) - Výška loženia: 91 cm - Zaisťovacie oka (viazacie body) - Blatníky (alebo priestor pre kolesá) - Rozširovacie vložky - Rozmery labutej šije: dĺžka 252 cm x šírka 247 cm x výška 40 cm Iedpfeyztt Tex Aiajia - Výška loženia: 149 cm - 2 hliníkové nájazdové rampy ALTEC (typ: VFR120) - Rozmery: dĺžka 235 cm x šírka 47 cm - Maximálny nájazdový uhol: 30 % (16,5°) - 10,5-tonové nápravy! - 18 ton nápravového tlaku! - 49,5 tony technická prípustná celková hmotnosť! - STAV NOVÉHO! - Vždy skladované v hale! - Najazdené iba 20 000 km! = Ďalšie informácie = Konfigurácia náprav Rozmer pneumatík: 235/75 17.5 Značka náprav: BPW Odpruženie: vzduchové odpruženie Zadná náprava 1: dvojmontáž; max. zaťaženie nápravy: 10 500 kg; vzor pneumatiky vľavo vnútri: 70 %; vľavo vonku: 70 %; vpravo vnútri: 70 %; vpravo vonku: 70 % Zadná náprava 2: dvojmontáž; max. zaťaženie nápravy: 10 500 kg; vzor pneumatiky vľavo vonku: 80 %; vpravo vonku: 80 % Zadná náprava 3: dvojmontáž; max. zaťaženie nápravy: 10 500 kg; riadená; vzor pneumatiky vľavo vnútri: 70 %; vľavo vonku: 70 %; vpravo vnútri: 70 %; vpravo vonku: 70 % Hmotnosti Pohotovostná hmotnosť: 10 069 kg Užitočné zaťaženie: 35 931 kg Celková prípustná hmotnosť: 46 000 kg Údržba, história a stav Počet majiteľov: 1 APK (technická kontrola): platná do 11.2026 Technický stav: dobrý Vizuálny stav: dobrý Identifikácia ŠPZ: OT-87-PP Bezpečnosť produktu Výrobca: Clean Mat Trucks B.V. Wageningsestraat 17 6673DB ANDELST, NL

Stav: použitý, pohotovostná hmotnosť: 11 200 kg, maximálna hmotnosť nákladu: 36 800 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 10/2025, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17.5, farba: sivý, Rok výroby: 2025, Výbava: ABS, Ku každému použitému návesu obdržíte aktuálnu a kompletnú inšpekčnú a funkčnú správu. Labutí krk: - Labutí krk so zadným skosením cca 750 mm x 10° - 3 páry upevňovacích krúžkov (LC 5 000 daN) - Povrch z tvrdého dreva, hrúbka 30 mm Nakladacia plocha vo vysúvateľnom prevedení: - Teleskopická nakladacia plocha so skosením vzadu cca 1 000 mm x 8° - 1 pár pevne zabudovaných kolísk pre kolesá pred nápravami cca 2 850 x 970 x 400 mm - Koliská pre kolesá s hranatými nášľapmi 15 x 15 mm a rozšíreniami v spodnej časti - Medzi prvou a druhou nápravou 1 pár pevne zabudovaných kolísk pre kolesá, cca 1 610 x 970 x 400 mm - Vrátane 3-dielnych odnímateľných pozinkovaných krytov nad koliskami (šírka 670 mm) – max. bodové zaťaženie 5 t / ks - Prehlbenie v skosení aj v prečnievaní nakladacej plochy na uchytenie lyžice bagra cca 2 900 x 750 x 210/290 mm - 1 pár upevňovacích krúžkov ležiacich vpredu v nakladacej ploche (LC 10 000 daN) - 5 párov vyklápateľných upevňovacích krúžkov (LC 5 000 daN) - 2 páry vyklápateľných upevňovacích krúžkov (LC 10 000 daN) - 2 páry upevňovacích krúžkov v prehlbení na rameno bagra (LC 5 000 daN) - Výrezy vo vonkajšom ráme nakladacej plochy na zavesovanie upínacích pásov (LC 2 000 daN) Rampen: - Jeden pár pozinkovaných dvojdielnych oceľových rámp cca 2 750 + 1 400 x 800 mm s povrchom z tvrdého dreva hrubého cca 48 mm - Rampa s hydraulicky sklopnými a zasúvateľnými časťami rampy, hydraulickým zdvihom a hydraulickým posunom - Maximálne zaťaženie na pár: 40 000 kg Nápravy a pneumatiky: - BPW nápravy a zavesenie, 2 nápravy pevné, 1 náprava s navádzaním Iiodpfxjyylduj Aiaea - Technická nosnosť nápravy: 12 000 kg - Elektromagnetická spätná zámka ovládaná zaradením spiatočky a manuálne - Vzduchové pruženie so zdvihom a spúšťaním - Náradie k nápravám - TPMS systém kontroly tlaku pneumatík podľa ECE R 141 - Pneumatiky 235/75 R17.5 3PMSF Príslušenstvo v cene: - Na labutom krku a vzadu vľavo aj vpravo držiak na výstražné tabule vrátane zásuvky - Jedno rezervné koleso s držiakom pred čelnou stenou - 2" kráľovský čap - Jeden pozinkovaný čelný plech z ocele, výška cca 400 mm - Na pozinkovanej prípojkovej lište vpredu žlto-červené vzduchové spojky - 4 kusy podložných klinov s držiakom - Pozinkované rozšírenia, vysúvateľné cca o 230 mm na každú stranu - Pozinkované sklopné podpery pod skosením nakladacej plochy - Krycie plechy na premostenie priestoru medzi rampami a nakladacou plochou - Biele reflexné pásy podľa predpisov EÚ po stranách a na vysuvnej časti, vzadu červené - Elektrohydraulická jednotka vzadu pod nakladacou plochou - Európske reflexné tabule (červeno-žlté) vzadu na návesu - 4ks výstražných tabúľ, výsuvné cca o 400 mm, cca 423 x 423 mm, s pozičným svetlom - Na výstražných tabuliach držiak na výstražné majáky - Na labutom krku hliníkové bočnice a zadné zasúvacie steny cca 2 440 x 400 mm - Zadné, pozinkované zasúvacie stĺpiky sú odnímateľné (dĺžka nadstavby cca 2 560 mm) - 2 páry kontajnerových vreciek WADER v nakladacej ploche pre 20ft alebo 30ft kontajner - 3 páry vreciek na stĺpiky (100 x 50 mm) vo vonkajšom ráme nakladacej plochy - Jeden odnímateľný, pozinkovaný medzistôl s 1 párom WADER kontajnerových vreciek - Hranaté nášľapy 20 x 20 mm každých 200 mm na vonkajšom ráme skosenia nakladacej plochy - Na ryhovaných plechoch na labutom krku a nakladacej ploche nalakovaná piesková vrstva ako protišmyková úprava - Nálepka na rýchlosť 80 km/h vzadu a na oboch stranách - Manometer na zaťaženie na určenie zaťaženia náprav vrátane zaťažovacieho diagram

Stav: použitý, pohotovostná hmotnosť: 12 200 kg, maximálna hmotnosť nákladu: 37 900 kg, celková hmotnosť: 50 100 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 12/2023, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Rok výroby: 2023, Výbava: ABS, With every used semi-trailer, you receive a current and complete inspection and function report. Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable load area: - Extendable load area with rear chamfer approx. 1,000 mm x 8° - 5 pairs of outward-folding lashing rings (LC 5,000 daN) - 3 pairs of outward-folding lashing rings (LC 10,000 daN) - 1 pair of flat-mounted lashing rings at the front of the load area (LC 10,000 daN) - Cut-outs in the outer frame of the load area for attaching tensioning straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, with checker plate over the axles Ijdpfx Ajyx E E Asiaeia Ramps: - One pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood surface - Ramp with hydraulically folding and unfolding ramp sections, hydraulic lifting system, and hydraulically adjustable - Maximum load per pair: 40,000 kg Axles and tyres: - BPW axles and suspension; all axles forced-steered by hydromechanics - Technical axle load: 12,000 kg - Air suspension with lifting and lowering valve - Axle tools - Tyres: 235/75 R 17.5 Accessories included: - 2" king pin - One galvanized steel front wall approx. 400 mm high - Yellow-red air couplings on the galvanized front terminal - 4 wheel chocks with holders - One spare wheel with holder in front of the front wall - Electro-hydraulic unit - Remote steering front and rear via cable remote control with push buttons, with axle tracking control - Mount at rear of gooseneck for ALU drive-on ramps - Gooseneck and ramps each left and right with mount for warning signs incl. socket - Galvanized folding supports under the chamfer of the load area - Ramp operation valves located on the right side of the trailer - Cover plates to bridge the gap between ramps and load area - On the gooseneck, approx. 2,440 x 400 mm plug-in ALU side walls and tailgate - Rear galvanized stanchions are removable (body length approx. 2,560 mm) - 4 pairs of WADER container locks in the floor for 1x 20ft, 2x 20ft, 40ft, or 1x 45ft container - 7 pairs of stanchion pockets for 100 x 50 mm plug-in stanchions in the outer frame of the load area - Galvanized extensions, extendable by approx. 230 mm per side - One INOX toolbox 1,500 x 390 x 810 mm underneath the load area, right side in direction of travel - 20 x 20 mm climbing bars every 200 mm on the outer frame along the load area chamfer - Lift axle at the front axle with control by TEBS E depending on current axle load and load condition - BEKAMAX central lubrication system (Pico) with standard grease NLGI-2 - Four warning signs, each extendable by approx. 400 mm, size approx. 423 x 423 mm, each with a position light - Radio remote control for remote steering in addition to the cable remote control, with indicator lights on the receiver for axle tracking control - Non-slip sand layer painted onto the checker plates, over the king pin and the load area - 80 km/h speed stickers on the rear and both sides - Load gauge for determining axle loads including load chart - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel construction shot-blasted, then all specified visible surfaces hot-finished with metallisation using ZINACOR 850 (zinc 85% - aluminium 15%)

Stav: použitý, pohotovostná hmotnosť: 10 650 kg, maximálna hmotnosť nákladu: 40 310 kg, celková hmotnosť: 50 960 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 10/2024, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 760 mm, zavesenie: vzduch, veľkosť pneumatiky: 205/65 R17.5, farba: sivý, Rok výroby: 2024, prevádzková hmotnosť: 10 650 kg, Výbava: ABS, For every used semi-trailer, you will receive a current and comprehensive inspection and functionality report. Gooseneck: - Gooseneck with 30 mm thick hardwood flooring - Rear straight gooseneck design - 3 pairs of lashing rings (LC 5,000 daN) Loading platform: - Extendable loading platform - 5 pairs of fold-out lashing rings (LC 5,000 daN) - 3 pairs of fold-out lashing rings (LC 10,000 daN) - 1 pair of flush-mounted lashing rings at the front of the loading platform (LC 10,000 daN) - Cut-outs in the external frame of the platform for attaching tie-down straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, over the axles covered with checker plate Axles and Tyres: - BPW axles, 2 fixed axles, 2 self-tracking axles - Air suspension, drum brakes, lifting/lowering function - Self-tracking axles with electro-magnetic reverse lock, can be activated by reverse gear or manually - Axle tools - Tyres 205/65 R17.5 Brake System: - WABCO brake system in accordance with EU regulations, with EBS-E (4S3M) Steel Construction: - High-strength fine-grain steel construction - Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Painting: - First-class and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) top coat, single-color Novagrau Accessories included: - Spare wheel carrier in front of front wall - 2" king pin - Galvanized steel front wall approx. 400 mm high - At the galvanized front connection bar, yellow and red air couplings - 4 wheel chocks with holder on the front wall - Galvanized folding supports under the bevel of the platform - Bracket for beacon light at the rear of the semi-trailer - Zinc-plated extendable width extensions, approx. 230 mm per side - White reflective tape according to EU regulations on the sides, on the extension, and red at the rear - Gooseneck and rear plate each with a warning sign bracket including socket left and right - Mudflap at the rear - European reflective signs (red-yellow) at the rear of the semi-trailer - TPMS tire pressure monitoring system in accordance with ECE R 141 - On the gooseneck, removable ALU side walls and rear wall approx. 2,440 x 400 mm - Removable galvanized rear stanchions (body length approx. 2,560 mm) - 7 pairs of container locks: 1x 20ft container on the platform; 1x 40ft container on the platform; 1x 40ft container on the gooseneck; 2x 20ft containers - 7 pairs of pockets for plug-in stanchions 100 x 50 mm in the outer frame of the platform - Lifting axle at the front axle with TEBS E control, depending on the current axle load and cargo condition - Movable hanging rail for ALU loading ramps at the rear of the vehicle - On the checker plate on the gooseneck and platform, painted sand layer for anti-slip protection - Four extendable warning panels (approx. 400 mm extension), approx. 423 x 423 mm, each with a positioning light - Bracket for beacon on the warning panels Iiodpfsxfa E Ujx Aiasa - 80 km/h speed stickers at the rear and on both sides - Load gauge for determining axle loads including load chart - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel construction shot-blasted, then the defined visible surfaces metallized with ZINACOR 850 (Zinc 85% - Alu 15%), hot-finished

Stav: použitý, pohotovostná hmotnosť: 13 200 kg, maximálna hmotnosť nákladu: 52 800 kg, celková hmotnosť: 66 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 06/2025, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 245/70 R 17,5, farba: sivý, Rok výroby: 2025, Výbava: ABS, With every used semi-trailer, you will receive a current and comprehensive inspection and functionality report. Gooseneck: - Gooseneck with rear taper approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable Loading Platform: - Extendable platform with rear taper approx. 1,000 mm x 8° - 5 pairs of folding external lashing rings (LC 5,000 daN) - 3 pairs of folding external lashing rings (LC 10,000 daN) - 1 pair of recessed lashing rings at the front of the platform (LC 10,000 daN) - Cut-outs in the outer frame of the loading platform for tension strap hooks (LC 2,000 daN) - Hardwood flooring approx. 48 mm thick, chequer plate covering above the axles Isdpfxsyffd De Aiaeia Axles and Tyres: - BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanically steered - Technical axle load: 12,000 kg - Air suspension with raise/lower valve - Tyres 245/70 R 17.5 - TPMS tyre pressure monitoring system according to ECE R 141 Two-piece Steel Ramps: - One pair of galvanized two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with 48 mm thick hardwood cover - Ramps with hydraulically folding sections, hydraulic lifting device, and hydraulically adjustable position - Maximum load per pair: 40,000 kg Included Accessories: - 2" kingpin - One galvanized steel front wall approx. 400 mm high - Yellow-red air couplings on the front galvanized connection rail - 4 wheel chocks - One spare wheel - Electro-hydraulic unit - Remote steering control from front and rear via cable remote with push buttons, includes axle alignment monitoring - Mounting points at the rear of gooseneck for ALU drive-on ramps - European reflective warning panels (red-yellow) at the rear of the trailer - White reflective tape in compliance with EU regulations on sides, on extension, and red at the rear - At the gooseneck and ramp sides (left/right) each one mount for warning signs including socket - One mount for beacon at rear of trailer - Galvanized folding supports under loading platform taper - Operating valves for ramps located on the right side of the trailer - Cover plates to bridge the gap between ramps and loading platform - Central lubrication system BEKAMAX (Pico) with standard NLGI-2 grease - On the gooseneck: ALU side and rear walls approx. 2,440 x 400 mm, pluggable - Rear galvanized plug-in stakes are removable (body length approx. 2,560 mm) - INOX toolbox 1,350 x 400 x 400 mm on gooseneck, box covers oil filler cap - 4 pairs of WADER container locks in loading platform for one 20ft, 2x 20ft, 40ft or one 45ft container - 7 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading platform - Galvanized platform extensions, extendable by approx. 230 mm per side - Checkerboard climbing strips 20 x 20 mm every 200 mm on the outer frame of the platform taper - Lift axle on front axle, control via TEBS E depending on current axle load and loading status - Four warning panels extendable by approx. 400 mm (approx. 423 x 423 mm) each with position light - Radio remote control for remote axle steering in addition to cable control, with control lights on receiver for axle tracking - Anti-slip sand coating applied on chequer plates on gooseneck and loading platform - 80 km/h speed limit stickers at rear and on both sides

Stav: nový, maximálna hmotnosť nákladu: 36 245 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 500 mm, celková šírka: 2 540 mm, Výbava: ABS, Celý náš aktuální sklad vozidel, včetně vozidel ihned nebo krátkodobě dostupných, najdete na naší webové stránce. Výňatek z výbavy. Kompletní výbava na vyžádání. Ložná plocha: Iedoyvnfaepfx Aiajia * Ložná plocha z tvrdého dřeva se zadním skosením cca 1 000 mm x 8° * 2 páry upínacích ok (LC 5 000 daN) * 1 pár upínacích ok (LC 10 000 daN) * 6 párů sklopných upínacích ok směrem ven (LC 5 000 daN) * 2 páry sklopných upínacích ok směrem ven (LC 10 000 daN) * Výřezy v vnějším rámu ložné plochy pro upevnění upínacích pásů (LC 2 000 daN) Opěrné nohy: * JOST opěrné nohy (mechanické) s dvourychlostní převodovkou, nosnost cca 24 t (zkoušená zatížitelnost cca 50 t) Nápravy: * BPW nápravy, vzduchové odpružení, kotoučové brzdy (cca 377 mm), funkce zdvihu/snížení (ET 120) * Nářadí pro nápravy Obutí: * Pneumatiky 435/50 R 19.5 – značka dle našeho výběru * TPMS systém kontroly tlaku v pneumatikách dle ECE R 141. Přenos dat do tahače probíhá přes normované EBS rozhraní dle ISO 11992. Pro správné zobrazení musí být tahač schopen tato data přijímat a zobrazovat. Brzdový systém: * Brzdový systém Wabco dle předpisů EU s EBS-E (2S2M) bez spojovacích vedení na tahač Ocelová konstrukce: * Ocelová konstrukce z vysocepevnostních jemnozrnných ocelí. Jakosti: S355J2+N/S355MC (mez kluzu 355 MPa), S690QL/S700MC (mez kluzu 690 MPa) Elektroinstalace: * Elektroinstalace dle předpisů EU, osvětlení 24 V ASPÖCK-NORDIK (ASS3) * Všechna LED boční poziční světla blikají se směrovkou * ASPÖCK-UNIBOX na přední připojovací liště se zásuvkami 24N, 24S a 15pólovou zásuvkou dle ISO: 24N ISO-1185, 24S ISO-3731, 15 pólů ISO-12098 Lakování: * Kompletní ocelová konstrukce po svaření automaticky tryskána v zařízení s metacími koly, druhé tryskání korundem pro optimální přilnavost lakového systému * Metalizace celého podvozku vozidla ZINACOR 850 (85 % zinek/15 % hliník) – pro zajištění nejlepší ochrany proti korozi * Vrchní lak dvouvrstvý dvousložkový nátěr, jednobarevně dle RAL 3002 karmínová červeň podle systému RAL 841GL * Zadní část vozidla metalizována a lakována v RAL 9010 (čistě bílá) * Systém lakování testován ve slanovodním sprejovém testu dle ISO 9227-NSS * Dutiny zataveny speciálním voskem Včetně následujícího příslušenství: * Žluto-červené vzduchové spojky na pozinkované přípojnici vpředu * 4 klíny s držáky * 2 palcový královský čep * Ložná plocha s vyztuženou tvrdodřevěnou podlahou * 1 držák rezervního kola pod ložnou plochou vpravo ve směru jízdy * Pozinkované sklápěcí opěrné nohy pod skosením ložné plochy * 9 párů kapes pro sloupky cca 100 x 50 mm ve vnějším rámu ložné plochy * 1 pozinkovaná ocelová přední stěna (EN12642-XL) vysoká cca 1 600 mm * Na centrálním nosníku lakovaná písková vrstva proti skluzu * 1 INOX (nerezová) příčná skříňka pod ložnou plochou, cca 1 000 x 400 x 2 500 mm * 6 párů zásuvek WADER na kontejnery v ložné ploše pro 1x 20' kontejner, 2x 20' kontejnery nebo 1x 40' kontejner * 3 páry příčných kapes pro sloupky cca 100 x 50 mm na ložné ploše * Úložný prostor pro max. 9 párů sloupků cca 100 x 50 mm šroubovaný uvnitř na přední stěně * 2 INOX skříňky pod ložnou plochou vlevo a vpravo, cca 600 x 350 x 600 mm * Držák pro hliníkové nájezdové rampy, příčně pod ložnou plochou za nápravami * 1 maják dodaný volně * 2 páry přepravních

Stav: veľmi dobrý (použitý), prvá registrácia: 05/2013, celková dĺžka: 123 500 mm, celková šírka: 2 550 mm, celková výška: 900 mm, farba: modrá, Rok výroby: 2013, Prevádzková hmotnosť: 9.100 kg Užitočné zaťaženie: 48.900 kg Celková povolená hmotnosť: 58.000 kg Iiedpeyuphfofx Aiaja Technický stav: veľmi dobrý Optický stav: veľmi dobrý 4 NÁPRAVY S VZDUCHOVÝM ODPRUŽENÍM 2 RIADENÉ NÁPRAVY, 1 ZDVIHACIA NÁPRAVA 10.000 KG NA NÁPRAVU TECHNICKY POVOLENÁ CELKOVÁ HMOTNOSŤ: 58.000 KG ROZMER PNEUMATÍK: 245/70 R17.5 DĹŽKA LOŽNEJ PLOCHY: 855 CM + 335 CM LABUTÍ KRK ŠÍRKA LOŽNEJ PLOCHY: 255 CM VÝŠKA LOŽNEJ PLOCHY: 90 CM UPÍNACIE OKÁ A OKRÚHLE MISY

Stav: nový, konfigurácia náprav: 3 nápravy, celková dĺžka: 9 300 mm, celková šírka: 2 540 mm, zavesenie: vzduch, veľkosť pneumatiky: 245/70 R17.5, rázvor náprav: 1 360 mm, farba: modrá, Rok výroby: 2023, Výbava: zdvíhacie čelo, Farba: Modrá Nosnosť: 54 465 kg Hlavné vlastnosti: Výrobca: Faymonville Model: MAX 110-Z-4AA-9.30-U Číslo podvozku: YAMT14XX4N0107629 Rok výroby: Nový, nepoužívaný Hmotnosti/Nosnosť: Zaťaženie na ťažný čap: 23 000 kg Zaťažiteľnosť náprav: 12 000 kg Celkové zaťaženie náprav: 48 000 kg Celková prípustná hmotnosť (GVW): 71 000 kg Pohotovostná hmotnosť: 16 535 kg Užitočná nosnosť: 54 465 kg Nápravy: Značka náprav: BPW Hydraulické riadenie Vzduchové odpruženie s možnosťou zdvíhania a spúšťania Brzdový systém WABCO Pneumatiky: 245/70 R17.5 – Michelin (zaťažovací index 146/146 F) Prvá náprava zdvíhacia Rozmery: Dĺžka ložnej plochy: 9 300 mm Predlžovanie: 6 500 + 6 800 mm Šírka ložnej plochy: 2 540 mm Výška nakladania: 900 mm Ďalšie informácie: Dvojito vysúvateľná ložná plocha Kontajnertové zámky Výsuvné bočné podpery + drevené výsuvy na rozšírenie do šírky Kotviace oká Súprava dvoch skladacích nákladových rámp Centrálne mazanie 1x rezervné koleso s držiakom Podpery JOST Elektrická inštalácia 24 V King-pin 2.0" (ťažný čap) Jeden pozinkovaný oceľový čelník Elektricky poháňané hydraulické čerpadlo Ijdpouu Hcfofx Aiaeia Ručné riadenie Twist locky = Ďalšie informácie = Všeobecné údaje Rok výroby: 2023 Konfigurácia náprav Rozmer pneumatík: 245/70 R17.5 Odpruženie: vzduchové Zadná náprava 1: Dvojmontáž; zdvíhacia náprava; max. zaťaženie: 12 000 kg; riadená; značka náprav: BPW; profil pneumatík vľavo vnútri: 100 %; profil pneumatík vľavo vonku: 100 %; profil pneumatík vpravo vnútri: 100 %; profil pneumatík vpravo vonku: 100 % Zadná náprava 2: Dvojmontáž; max. zaťaženie: 12 000 kg; riadená; profil pneumatík vľavo vnútri: 100 %; profil pneumatík vľavo vonku: 100 %; profil pneumatík vpravo vnútri: 100 %; profil pneumatík vpravo vonku: 100 % Zadná náprava 3: Dvojmontáž; max. zaťaženie: 12 000 kg; riadená; profil pneumatík vľavo vnútri: 100 %; profil pneumatík vľavo vonku: 100 %; profil pneumatík vpravo vnútri: 100 %; profil pneumatík vpravo vonku: 100 % Zadná náprava 4: Dvojmontáž; max. zaťaženie: 12 000 kg; riadená; profil pneumatík vľavo vnútri: 100 %; profil pneumatík vľavo vonku: 100 %; profil pneumatík vpravo vnútri: 100 %; profil pneumatík vpravo vonku: 100 % Hmotnosti Pohotovostná hmotnosť: 16 535 kg Nosnosť: 54 465 kg Celková prípustná hmotnosť: 71 000 kg Funkčnosť Výška ložnej plochy: 900 mm Predlžovacia nadstavba: Áno Stav Všeobecný stav: veľmi dobrý Technický stav: veľmi dobrý Vizuálny stav: veľmi dobrý Finančné informácie Cena: na vyžiadanie Dodatočné informácie Pre ďalšie informácie kontaktujte pána Stefana Schaapvelda.

Stav: použitý, farba: zelený, Rok výroby: 2015, Faymonville F-S44-1ACA. Rok výroby: 2015. Nápravy SAF 10 t. Hmotnosť: 22 250 kg. Nosnosť: 57 750 kg. Maximálna hmotnosť: 80 000 kg. Zaťaženie kráľovského čapu: 40 000 kg. EBS, ABS, ALB. Hydraulika ovládaná cez NATO zásuvku z ťažného vozidla. ALU bočnice na labutej šiji. Hydraulicky odpojiteľná labutia šija. Vzduchové pruženie. Predĺženie o 5 metrov. Rádiové diaľkové ovládanie. Rýpadlový mostík: 5600 mm x 950 mm. Pneumatiky: 235/75R17,5 — 80% vzorky. Rozmery: Labutia šija: Dĺžka: 4900 mm Šírka: 2500 mm Výška: 1800 mm Výška kráľovského čapu: 1300 mm Ložná plocha: Dĺžka: 8000 mm Šírka: 2750 mm Výška: 500 mm Hrúbka ložnej plochy: 300 mm Zadná časť návesu: Dĺžka: 5600 mm Šírka: 2750 mm Výška: 1050 mm Podporný vozík (Dolly) D-2. Rok výroby: 2015. Nápravy SAF 10 t. Hmotnosť: 3 650 kg. Maximálna hmotnosť: 36 100 kg. Zaťaženie kráľovského čapu: 16 100 kg. Vzduchové pruženie. Pneumatiky: 235/75R17,5 — 70% vzorky. Nemecký náves! K dispozícii 4 kusy! Iijdoypck Aspfx Aiaja ID č.: 427. Všeobecné obchodné podmienky spoločnosti Heinhuis sa vzťahujú na všetky inzeráty, ponuky a cenové ponuky spoločnosti Heinhuis, na všetky zmluvy uzavreté spoločnosťou Heinhuis a na rokovania, ktoré im predchádzajú. Akoukoľvek formou reakcie akceptujete platnosť Všeobecných obchodných podmienok spoločnosti Heinhuis a vyhlasujete, že ste sa s nimi oboznámili. Naše ceny sú netto ceny pre vývoz. = Ďalšie informácie = Rok výroby: 2015 Prevádzková hmotnosť: 22 250 kg Nosnosť: 57 750 kg Celková prípustná hmotnosť: 80 000 kg Predlžovacia konštrukcia: Áno Cena: Na vyžiadanie = Firemné informácie = Pre viac informácií: WhatsApp:

Stav: použitý, farba: zelený, Rok výroby: 2015, Faymonville F-S44-1ACA. Rok výroby: 2015. Nápravy SAF 10 t. Vlastná hmotnosť: 22 250 kg. Nosnosť: 57 750 kg. Maximálna hmotnosť: 80 000 kg. Zatížení na čep: 40 000 kg. EBS, ABS, ALB. Hydraulika ovládaná z vozidla cez NATO pripojenie. Allu bočnice na krku. Hydraulicky odpojiteľný krk (gooseneck). Vzduchové odpruženie. Predĺženie podvozku o 5 metrov. Ijdpfxoynayxo Aiaeia Rádioové diaľkové ovládanie. Most pre rýpadlo: 5600 mm x 950 mm. Pneumatiky: 235/75R17,5, 80%. Rozmery: Krk: Dĺžka: 4900 mm Šírka: 2500 mm Výška: 1800 mm Výška kráľovského čapu: 1300 mm Podlaha: Dĺžka: 8000 mm Šírka: 2750 mm Výška: 500 mm Hrúbka podlahy: 300 mm Zadná časť návesu: Dĺžka: 5600 mm Šírka: 2750 mm Výška: 1050 mm Dolly D-2. Rok výroby: 2015. Nápravy SAF 10 t. Vlastná hmotnosť: 3650 kg. Maximálna hmotnosť: 36 100 kg. Zatížení na čep: 16 100 kg. Vzduchové odpruženie. Pneumatiky: 235/75R17,5, 70%. Nemecký náves! K dispozícii 4 kusy! ID č.: 552. Na všetky inzeráty, ponuky a cenové ponuky spoločnosti Heinhuis, ako aj na všetky zmluvy uzatvorené spoločnosťou Heinhuis a na rokovania, ktoré im predchádzajú, sa vzťahujú Všeobecné obchodné podmienky spoločnosti Heinhuis. Ak odpoviete akoukoľvek formou, akceptujete platnosť Všeobecných obchodných podmienok spoločnosti Heinhuis a vyhlasujete, že ste sa s nimi oboznámili. Naše ceny sú netto ceny na export. = Ďalšie informácie = Rok výroby: 2015 Vlastná hmotnosť: 22 250 kg Nosnosť: 57 750 kg Celková hmotnosť: 80 000 kg Predĺžiteľná konštrukcia: Áno Cena: Na požiadanie = Firemné informácie = Pre viac informácií: WhatsApp:

Stav: nový, pohotovostná hmotnosť: 11 000 kg, maximálna hmotnosť nákladu: 38 500 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Neck (Gooseneck): - Gooseneck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading Platform: - Telescopic loading platform with rear chamfer approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm - Wheel recesses with 15 x 15 mm square climbing strips and widenings in the lower area - Between the 1st and 2nd axle a pair of fixed wheel recesses with cover, approx. 1,610 x 970 x 400 mm - Recess in the chamfer and protruding into the loading platform for the reception of an excavator dipper stick approx. 2,900 x 750 x 210/290 mm Iisdpjup U Hzofx Aiasa - 1 pair of horizontal lashing rings at the front of the platform (LC 10,000 daN) - 5 pairs of fold-out lashing rings (LC 5,000 daN) - 2 pairs of fold-out lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) - Cutouts in the outer frame of the platform for securing straps (LC 2,000 daN) - incl. 3-piece removable galvanized covers over the wheel recesses – max. point load 3.5 t / each Two-Part Steel Ramps: - One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood planking - Ramp with hydraulically folding ramp sections, hydraulic lifting system, and hydraulically adjustable position Axles and Tyres: - BPW axles and suspension, 2 axles fixed, 1 axle self-steering - Technical axle load: 12,000 kg - Electromagnetic reverse lock, operable via reverse gear and manually - Air suspension with lifting and lowering valve - Axle tools - Tyres 235/75 R 17.5 - TPMS tire pressure monitoring system according to ECE R 141 Accessories included: - On the gooseneck and at the rear, left and right, each with a mount for warning signs including socket - One spare wheel - 2" king pin - One galvanized steel front wall approx. 400 mm high - Front galvanized connection rail with yellow-red air couplings - 4 wheel chocks - Galvanized extendable widenings, approx. 230 mm each side - Galvanized folding supports under the platform chamfer - One holder for a revolving beacon at the rear of the trailer - Cover plates to bridge the gap between ramps and platform - White reflector tape on sides and extension; rear in red, per EU regulations - Electro-hydraulic unit at the rear under the platform - Controls for ramps mounted on the right side of the trailer - European reflective warning signs (red-yellow) at the rear of the trailer - Four approx. 400 mm extendable warning panels, approx. 423 x 423 mm, each with a position light - Mount for revolving beacon on the warning panels - Aluminium plug-in drop sides and rear wall on the gooseneck, approx. 2,440 x 400 mm - Removable rear galvanized stanchions (body length approx. 2,560 mm) - 2 pairs of WADER container locks recessed into the platform for one 20ft or 30ft container - 3 pairs of stanchion pockets 100 x 50 mm on the outer frame of the platform - One removable galvanized intermediate table with 1 pair of WADER container locks - 20 x 20 mm square climbing strips every 200 mm on the outer frame of the platform chamfer - Painted sand layer on the tread plates on the gooseneck and the loading platform as anti-slip coating - 80 km/h speed stickers at the rear and both sides - Load manometer for determining the axle loads, including load diagram