Meusburger 3-Achs-Semi 2 P. Radmulden-Hydr. Rampen kúpiť použité (65 453)

Stav: nový, pohotovostná hmotnosť: 11 000 kg, maximálna hmotnosť nákladu: 27 000 kg, celková hmotnosť: 38 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 300 mm, šírka ložného priestoru: 2 550 mm, veľkosť pneumatiky: 235/75 R17.5, farba: sivý, prevádzková hmotnosť: 11 000 kg, Výbava: ABS, Chassis: - Welded steel frame construction with front and rear frame cranking and lowbed without rear bevel Redsiu Eu Nepfx Aqueu - Gooseneck + king pin plate 225 mm - Lowbed designed for point load of 25 t over 5 m - Outer frame closed to the outside with welded lashing rings for securing cargo - Interchangeable 2" king pin - Rear hanging track for aluminum ramps Axles and Tyres: - BPW low loader axles, each with 10 t axle load, air bellows diameter 360 mm - Air suspension with lifting and lowering device, lift 220 mm (-60/+160 mm) - Wabco SmartBoard with ECAS function for 2 coupling heights + 100 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - IVTM tire pressure monitoring system - 9 tires 235/75 R 17.5, tubeless Steering: - 1st and 2nd axle hydraulically forced steering via fifth wheel coupling Floor: - Laminated multi-layer floor, 27 mm thick, flush with outer frame and longitudinal beams - Reinforced underneath with GRP coating - 12 pairs of lashing rings welded into the outer frame (8 pairs RUD 8 t – 6 pairs in the lowbed as well as one pair each on the gooseneck and at the start of the rear compartment – 2 pairs each of 4 t lashing rings on the gooseneck and rear compartment) - 6 pairs of mushroom lashing points in the outer frame lowbed - Storage compartment with lid in the lowbed floor front left and right Front Wall: - 25 mm aluminum hollow profiles extended up to the lower roof edge with integrated curtain tensioning device Curtain Sides: - Curtains on both sides with welded-in vertical and horizontal straps (spacing approx. 600 mm) and tension locks made of stainless steel - Adjustable curtain straps (over-center type) for loading width up to 4,000 mm including curtain extension with press studs and Velcro fastener - Curtain extension to the driving direction: 300 mm, in height: 750 mm - With eyelets for loose curtain extension part - 1 pair of vertical curtain pockets approx. 1,000 mm long, positioned in the lowbed at the front cranking - With strap pockets Rear Wall: - Steel tail portal frame with side curtain retaining bracket - Aluminum double-wing door, 25 mm thick - Both door wings fully folding with door retainers - Each door wing with one double hinge and two recessed grip pockets Front Corner Posts: - At roof height, bolted to the front end Center Posts: - 3 pairs of infinitely adjustable folding posts - Posts are movable along the entire length by means of rollers - Center posts in lowbed also fixable at the rear platform Roof: - EDSCHA sliding roof (galvanized) with transverse bows, can be shifted in both directions (pushed together at the front in the load area) - Rear portal crossbar can be swivelled away - PVC tarpaulin roof without customs closure - Manual hydraulic lifting roof on both sides, lift 450 mm - Retractable roof can be operated in front (9x50) and rear (9x50) raised positions - Including curtain extension and curtain tail at the rear - Roof canopy at the very front of the front wall, each extendable by 900 mm with crank Accessories: - Extensible warning signs (removable at front and rear with socket), incl. position lights up to loading width of 4,000 mm - Storage for 4 warning signs inside front wall, top right and left - 1 aluminum ladder with holder, 2,500 mm long, at the front wall - 2 rows of self-locking aluminum slats - Sheet metal fenders with mud flaps - 1 night parking sign and 1 ADR sign on the rear wall - Central lubrication system BEKAMAX with pump and grease

Stav: nový, maximálna hmotnosť nákladu: 23 920 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, NOVÉ VOZIDLO Fliegl 3-nápravový nízkoložný náves Typ DTS 300, žiarovo zinkovaný Celková hmotnosť: 24.000 kg / 30.000 kg Užitočné zaťaženie: 17.920 kg / 23.920 kg Pohotovostná hmotnosť: 6.080 kg Celková dĺžka: 10.900 mm Dĺžka ložnej plochy: 8.680 mm Ložná plocha: 6.500 mm vrátane 900 mm nájazdového sklonu Parabolické listové pruženie Dlhé rampy 2.800 mm s hydraulickým ovládaním Rozšírenie na 3.000 mm s výstražnými tabuľami a majákom Kompletný balík upevňovacích bodov (5,0 a 10,0 ton) 5 párov vreciek na stĺpiky Ťažné oko 40 mm Príplatok za dopravu/pripravenie zo skladu Wiesmoor 1.280,00 € bez DPH Leasingová ponuka: doba 48 mesiacov, zostatková hodnota 40 %, akontácia len DPH. Rjdpfx Aoxb Nmyequsu Mesačná splátka: 500,00 EUR

Stav: nový, pohotovostná hmotnosť: 6 760 kg, maximálna hmotnosť nákladu: 23 240 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 100 mm, šírka ložného priestoru: 2 550 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235/75 R 17,5, veľkosť zadnej pneumatiky: 235/75 R 17,5, kabína vodiča: iný, emisná trieda: žiadny, palivo: biodiesel, Výbava: ABS, pneumatická brzda, Cargo area length 8,100 mm, loading height loaded approx. 900 mm, 20 lashing rings each 10 t, 14 stake pockets in outer frame, 70 mm thick wooden floor, storage box with lid for lashing chains or tie-down straps, contour markings as required by regulations, spring-loaded parking brake, incl. axle load indicators, vehicle hot-dip galvanized, also available with 9 m cargo area length + extension in stock. Surcharge for: aluminum ramps = price: €1,600; warning panels with lighting = price: €800. -- Errors, omissions, and changes excepted, sample photos --, More data at: !, More details: ! Redpfx Ajzakgyjquou

Stav: nový, pohotovostná hmotnosť: 7 320 kg, maximálna hmotnosť nákladu: 22 680 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 100 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75 R 17,5, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235/75 R 17,5, veľkosť zadnej pneumatiky: 235/75 R 17,5, kabína vodiča: iný, emisná trieda: žiadny, palivo: biodiesel, Výbava: ABS, pneumatická brzda, Load platform length: 8,100 mm, loading height loaded: approx. 900 mm, 20 lashing eyes each rated at 10 t, 14 stake pockets in the outer frame, access ramps (approx. 3,000 x 750 mm), ramps laterally adjustable, spring-assist for one-piece ramps, 70 mm thick hardwood floor, storage box with lid for lashing chains or tensioning straps, contour markings in accordance with regulations, spring-loaded parking brake, vehicle chassis fully hot-dip galvanized. Rodpozakg Tsfx Aquou Available at extra cost: - Warning signs with lighting and beacon = Price: €800 - Extension to 3 m width = Price: €1,100 - Hydraulic one-piece ramps = €500 Also available from stock with 9 m load platform length and wide version. -- Errors, misprints and modifications reserved, sample images -- More data available at: ! More details: !

Stav: nový, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 200 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235/75 R 17,5, veľkosť zadnej pneumatiky: 235/75 R 17,5, kabína vodiča: iný, emisná trieda: žiadny, palivo: biodiesel, Výbava: ABS, pneumatická brzda, s ukazovateľom zaťaženia nápravy, dĺžka ložnej plochy 8 200 mm, ložná výška zaťažená cca 900 mm, 20 x kotviacich ôk po 10 t, 14 x vrecká na kolíky vo vonkajšom ráme, najazdové rampy (cca 3 000 x 750 mm), lepiaca lišta na vonkajšej strane rámp a šikmine zadnej časti, rampy bočne nastaviteľné, pružinový zdvihák na jednoliate rampy, drevená podlaha 70 mm hrubá, odkladacia skrinka s vekom na upevňovacie reťaze alebo pásy, obrysové označenie podľa predpisov, parkovacia brzda s pružinovým akumulátorom, vozidlo ponorene žiarovo zinkované, vrátane ukazovateľov zaťaženia náprav. Príplatky za: výstražné tabule + osvetlenie + maják = cena: 800 €, rozšírenie na 3 m = cena: 1 100 €, hydraulické jednodielne rampy 500 €, hydraulické bočné posúvanie rámp = cena: 1 000 €, výklenok na rameno bagra = cena: 1 000 €. Dostupné aj s ložnou dĺžkou 9,20 m skladom. -- Zmeny, chyby a tlačové chyby vyhradené, ilustračné obrázky --, Viac údajov na: !, Viac detailov na: ! Redezakg Hepfx Aqueu

Stav: nový, pohotovostná hmotnosť: 7 320 kg, maximálna hmotnosť nákladu: 22 680 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 100 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75 R 17,5, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235/75 R 17,5, veľkosť zadnej pneumatiky: 235/75 R 17,5, kabína vodiča: iný, emisná trieda: žiadny, palivo: biodiesel, Výbava: ABS, pneumatická brzda, Load platform length: 8,100 mm, loading height loaded: approx. 900 mm, 20 lashing eyes each rated at 10 t, 14 stake pockets in the outer frame, access ramps (approx. 3,000 x 750 mm), ramps laterally adjustable, spring-assist for one-piece ramps, 70 mm thick hardwood floor, storage box with lid for lashing chains or tensioning straps, contour markings in accordance with regulations, spring-loaded parking brake, vehicle chassis fully hot-dip galvanized. Rjdpfxsy Uam Ho Aqusu Available at extra cost: - Warning signs with lighting and beacon = Price: €800 - Extension to 3 m width = Price: €1,100 - Hydraulic one-piece ramps = €500 Also available from stock with 9 m load platform length and wide version. -- Errors, misprints and modifications reserved, sample images -- More data available at: ! More details: !

Stav: použitý, maximálna hmotnosť nákladu: 13 850 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 05/1995, ďalšia kontrola (TÜV): 05/2026, Rok výroby: 1995, Výbava: ABS, Plne pojazdné Redpjy Dmupjfx Aqusu

Stav: použitý, maximálna hmotnosť nákladu: 13 390 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 10/2000, ďalšia kontrola (TÜV): 10/2026, Schwarzmüller trojstranný sklápací náves v dobrom stave ---- Technické špecifikácie: Všeobecné: * Zaťaženie prednej nápravy: 9 000 kg * Zaťaženie zadnej nápravy: 9 000 kg Kabína: * Chladnička: Nie Motor: * AdBlue: Áno Prevodovka: * Retardér: Nie Podvozok: * Odpruženie: vzduchové * Hliníkové disky: Nie * Zdvíhacia náprava: Nie * Riadiaca náprava: Nie * Povolené zaťaženie nápravy: 9 000 kg Sattel: * Znížený čap: Nie Dokumenty: * Pohotovostná hmotnosť: 4 600 kg * STK/EMIS platné do: 10/2026 Rjdpfx Aoy Rwpwequou

Stav: použitý, pohotovostná hmotnosť: 7 313 kg, maximálna hmotnosť nákladu: 31 687 kg, celková hmotnosť: 39 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 04/2024, ďalšia kontrola (TÜV): 05/2026, dĺžka ložného priestoru: 13 630 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 2 600 mm, objem nakladacieho priestoru: 87 m³, zavesenie: vzduch, veľkosť pneumatiky: 385 / 65 R 22,5, farba: strieborný, typ prevodu: iný, veľkosť prednej pneumatiky: 385 / 65 R 22,5, veľkosť zadnej pneumatiky: 385 / 65 R 22,5, kabína vodiča: iný, emisná trieda: žiadny, Výbava: ABS, Základná farba: strieborná Doplnky vo výbave ABS, vzduchové odpruženie, kotúčové brzdy, odpruženie: vzduch – zdvíhacia náprava, užitočné zaťaženie (kg): 31.687 Typ nadstavby: plošinový náves dĺžka x šírka x výška 13 630 x 2 480 x 2 600 mm, podvozok žiarovo pozinkovaný, paletový box (24 Euro), nápravy Schmitz s kotúčovými brzdami, 1. náprava zdvíhacia, systém na dobíjanie tlaku v pneumatikách, plachty Speed Curtain Sider vpravo a vľavo s certifikátom nákladu DIN EN 12642 kód XL pre nápoje VDI 2700 a Daimler – smernica pre zabezpečenie nákladu 9,5, zadné portálové dvere (neutralizované), Edscha otváranie spredu aj zozadu, RSAB, cúvacia kamera, vzduchové prípojky červená/žltá, 2 x 7-pin + 15-pin zásuvka, ABS, NOVÁ CENA ? 43 000,-- bez DPH. Redpfx Aeyrnrwsqueu

Stav: nový, maximálna hmotnosť nákladu: 16 000 kg, celková hmotnosť: 21 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 500 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 700 mm, Rok výroby: 2024, * KA-TA-RT 21.0 ML ----Brakes: * Without ABS / EBS, approved for 40 km/h * Spring-loaded parking brake * Drum brakes ----Axles: * Gigant axles ----Suspension: * Tandem equalizing suspension with 100 mm wide parabolic leaf springs ----Drawbar / Tow Eye: * Fixed welded drawbar with low-maintenance ball seat for K80 ball coupling (offset by +77 mm / 33 mm via mounting plate), with elevated gallows for connection lines ----Electrics / Lighting: * 12 V, 7 + 4-pin power line * LED lighting system 12 / 24 V with protective grilles * 2 LED work lights at the rear, switchable from the towing vehicle, no installation required on the towing vehicle ----General Equipment: * Support winch at the front * Mechanical drop-down supports at the rear * Side marker lights with indicator control * Plastic quarter mudguards * Plastic toolbox approx. 750 x 350 x 300 mm, right side * Hot-dip galvanized, two-step access ladder in front of the bulkhead on the left ----Chassis: * High-tensile fine grain steel chassis ----Tipper Body: * Steel pallet - 3-way tipper body with M-Strong side walls (fixed front wall, continuous side walls – without center stanchions – pivoting via manual central locking and mechanically foldable with side wall torsion springs) * Hydraulic tailgate 500 mm high, usable as a hydraulic chute, with 115° opening angle * 4 mm Hardox 450 steel floor ----Load Securing: * 1 x 7 t lashing ring recessed and foldable in each corner * 4 x 3 t lashing rings recessed and foldable each side ----Ramps: Rjdpfx Aqjr Dpzuouou * 1 pair of aluminum loading ramps (10 t/pair with axle spacing over 2,500 mm), 3,570 x 410 x 120 mm, suitable for rubber-tyred and tracked vehicles * 2 recesses for aluminum loading ramps at the rear, integrated into the chassis * Load securing in accordance with EN 12642 XL ----Coupling Height: * Loaded approx. 530 mm & unloaded approx. 590 mm ----Paintwork: * Superstructure painted RAL 9010 pure white * Chassis, drawbar, rear drop-down supports, underride guard hot-dip galvanized * Axles, air tank, support winch at the front * K80 coupling painted in black ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery time: * Immediately available from Egestorf

Stav: nový, maximálna hmotnosť nákladu: 16 000 kg, celková hmotnosť: 21 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 500 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 700 mm, Rok výroby: 2024, * KA-TA-RT 21.0 ML ----Brzdy: * Bez ABS / EBS, schváleno pro max. rychlost 40 km/h * Pružinová parkovací brzda * Bubnové brzdy ----Nápravy: * Gigant nápravy ----Pérování: * Tandemový vyrovnávací agregát s 100 mm širokými parabolickými listy ----Tažné oko / Tažná tyč: * Napevno svařená tažná tyč s bezúdržbovou kulovou hlavou pro K80 kulovou spojku (nastavitelná o +77 mm / 33 mm přes čelní desku), s vyvýšeným držákem pro připojovací vedení ----Elektrika / Osvětlení: * 12 V 7 + 4 pólový elektrický kabel * LED osvětlení 12/24 V se sítí proti poškození * 2 LED pracovní světlomety za vozidlem, ovládané z tažného vozidla bez nutnosti dodatečné instalace na tažném vozidle ----Všeobecné přídavné díly: * Opěrná klika vpředu Rodor Dpz Hjpfx Aquou * Mechanické sklopné podpěry vzadu * Boční obrysová světla s funkcí směrovky * Plastové čtvrtobloukové blatníky * Plastová skříň na nářadí cca 750 x 350 x 300 mm vpravo na boku * Dvoustupňové žárově zinkované schody před čelní stěnou vlevo ----Podvozek: * Rám z jemnozrnné oceli ----Sklápěcí korba: * Ocelová třístranná sklápěcí nástavba s robustními bočnicemi (pevná přední stěna, průběžné boční stěny – bez středových sloupků – kyvné přes manuální centrální zamykání a mechanicky sklopné s pomocí pružinového mechanismu) * Hydraulicky poháněná zadní stěna, výška 500 mm, slouží jako hydraulická skluzavka s úhlem otevření 115° * 4 mm Hardox 450 ocelové dno ----Zajištění nákladu: * V každém rohu 1x utopený a sklopný úvazek, nosnost 7 t * Po stranách vždy 4x utopený a sklopný úvazek na trubku, nosnost 3 t ----Rámy: * 1 pár hliníkových nájezdových ramp (nosnost 10 t/pár, při rozteči náprav nad 2500 mm), rozměr 3 570 x 410 x 120 mm, vhodné pro pneumatiková i pásová vozidla * 2 zasouvací kanály pro rampy vzadu v rámu, zajištění nákladu dle EN 12642 XL ----Výška spojení: * Naložené cca 530 mm, nenaložené cca 590 mm ----Lakování: * Konstrukce lakována odstínem RAL 9010 (čistě bílá) * Rám, tažná tyč, zadní podpěry, ochrana proti podjetí žárově zinkované * Nápravy, vzduchojem, přední opěrná klika * K80 spojka lakovaná černým odstínem ----Informace: * Nový vůz s výrobcem poskytovanou zárukou * Změny a mezitímní prodej vyhrazeny ----Dodací lhůta: * Ihned k dispozici v Egestorfu

Stav: použitý, pohotovostná hmotnosť: 10 600 kg, maximálna hmotnosť nákladu: 22 500 kg, celková hmotnosť: 33 100 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 12/1984, dĺžka ložného priestoru: 11 900 mm, šírka ložného priestoru: 2 730 mm, výška ložného priestoru: 950 mm, zavesenie: oceľ, veľkosť pneumatiky: 7.50R15, farba: sivý, najazdené kilometre: 1 001 km, typ prevodu: iný, kabína vodiča: iný, Miesto vozidla: Bovenden, 3-nápravový, nápravy SAF, listové pruženie, upevňovacie oká, dvojdielne nájazdové rampy, mechanické rampy, bočná hliníková ochrana proti podjazdu, podpery, dvojmontáž pneumatík. Rsdpfx Aji Rp A Nsquou Nadstavba: 3-nápravový pozdĺžne znížený náves so dvojdielnymi mechanickými nájazdovými rampami, ložná dĺžka spodnej plošiny cca 8 900 mm! Údaje o príslušenstve bez záruky, zmena, medzičasný predaj a omyly vyhradené!

Stav: nový, maximálna hmotnosť nákladu: 31 630 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 250 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T 4: * EBS * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation front and rear * Tire pressure monitoring system with in-cab display via EBS signal – no installation needed on the truck side * Warning panel packages front & rear * Side and rear reflective contour tape * EBS multi-voltage system for 12 & 24 V electrics * Removable LED beacon rear * 24 V – 15-pin and additionally 12 V – 7+4 pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and stepless height adjustment * Tool box made of powder-coated steel plate as well as basket-type spare wheel holder on the right side * Closed single plastic mudguards at front Rodperczm Djfx Aqusu * Straight steel spray guards at rear, each with spray suppression * Side underrun protection * Extended offset cranked frame 500 mm forward * Turntable platform extended at the front by 520 mm with 45° corners and 3 recessed lockable storage compartments with lid * Chassis made of high-strength fine-grained steel * Floor above turntable platform made of 50 mm, and on the low-bed platform 60 mm conifer timber * Outer planks of loading ramps made of 50 mm bamboo wood * 4 pocket stakes each side (but no stakes included) with simultaneous 2 t lashing capacity * Lashing package consisting of: 2 lashing rings 6.4 t front left and right on the main frame of the turntable platform, front and rear on each side 1 pair of 13.4 t lashing rings on the outer frame, and on each side 4 pairs of 10 t lashing rings, foldable and lowerable, loadable in all directions and recessed into the outer frame, 2 pairs of 6.4 t lashing rings at the excavator arm rest, 8 pairs of galvanized folding outriggers for 3 m total width (not at rear slope) * Widening boards stored on the left side in a storage compartment * Excavator arm rest above the rear axle up to the start of ramp slope approx. 2,300 x 740 x 190 mm * Mechanical drop supports at the rear * Hydraulic hot-dip galvanized loading ramps approx. 3,000 x 720 mm * Hydraulic side-shift of the ramps on sliding tube from the ramp shaft * Load area above the turntable: approx. 2,990 x 2,520 mm * Rear load area: approx. 6,280 x 2,520 mm * Loading height loaded approx. 860 mm (including 860 mm ramp slope) * Chassis, turntable, loading ramps and mechanical drop supports at rear hot-dip galvanized * Axles, springs, air tanks and turntable painted in black tone * New vehicle with manufacturer's warranty * Errors and subject to prior sale * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 31 630 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 250 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T 4: * EBS (Elektronisches Bremssystem) * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation front and rear * Tire pressure monitoring system with display capability in the truck via EBS signal – no truck-side installation required * Warning panel packages front and rear * Reflective contour tape on the sides and rear * EBS multi-voltage system for 12 & 24 V electrical systems * Removable LED beacon (rear) * 24 V 15-pin as well as additional 12 V 7+4 pin power cables * Extended connection lines for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and stepless height adjustment * Tool box made of powder-coated steel sheet as well as a basket-type spare wheel carrier mounted on the right side * Closed single plastic fenders at the front * Straight steel mudguards at the rear, each with spray suppression (anti-spray system) * Side underrun protection * Offset crank extended 500 mm forward * Turntable platform extended 520 mm at the front with 45° corners and 3 recessed storage compartments including lid and lockable * Chassis made of high-tensile fine-grained steel * Decking above the turntable platform: 50 mm softwood, deep bed platform: 60 mm softwood * Outer planks on the loading ramps: 50 mm bamboo wood * 4 stake pockets per side (no stakes provided) with simultaneous 2 t lashing capability * Load securing package includes: 2 lashing rings 6.4 t front left and right on the main frame of the turntable platform, 1 pair each of 13.4 t lashing rings front and rear on the side outer frame, 4 pairs per side of 10 t lashing rings, swiveling and lowerable, loadable in all directions and recessed in the outer frame, 2 pairs of lashing rings 6.4 t on the side in the excavator arm tray, 8 pairs of galvanized folding outriggers for 3 mtr overall width (not provided at the rear slant) * Widening planks stored in a left-hand side compartment * Excavator arm tray above rear axle up to end of approach slant approx. 2,300 x 740 x 190 mm * Mechanical rear support legs * Hydraulic, hot-dip galvanized loading ramps approx. 3,000 x 720 mm * Hydraulic lateral ramp adjustment on sliding tube from ramp shaft Redpfsl Th Evsx Aqueu * Loading area above turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded floor height approx. 860 mm (including 860 mm approach slant) * Chassis, turntable, loading ramps, mechanical folding rear support legs hot-dip galvanized * Axles, springs, air tanks and turntable painted in black * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Stav: použitý, maximálna hmotnosť nákladu: 18 000 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 03/1987, dĺžka ložného priestoru: 12 340 mm, šírka ložného priestoru: 2 620 mm, celková šírka: 2 750 mm, celková výška: 1 450 mm, Nízkozdvižný príves: Celková dĺžka - 8 530 mm, dĺžka po prvú nápravu - 4 360 mm, nakladacia výška - 690 mm, dĺžka nad oboma nápravami - 1 800 mm, nakladacia výška: 900 mm, dĺžka za nápravami - 2 130 mm, výška nájazdu - 830 mm, sklon vpredu 240 mm, šírka: 2 620 mm, labutí krk: 3 900 mm, výška sedla 1 180 mm, vzdialenosť kráľovského čapu spredu: 1 150 mm, hliníkové nájazdové rampy (DxŠ) 2 880x500 mm, 4 x ťažké upevňovacie oká na každej strane, JOST oporné nohy, nápravy SAF, bubnové brzdy, listové odpruženie, vozidlo môže byť polepené alebo označené reklamou. SI85673 Rjdpfx Aqoyqdgususu Naša ponuka je vo všeobecnosti bez novej technickej kontroly (TÜV). V prípade záujmu o novú TÜV kontrolu vám radi pripravíme ponuku cez našich partnerských servisov! Vozidlo môže byť polepené alebo označené reklamou. Platia naše všeobecné dodacie a platobné podmienky. Radi vám pripravíme financovanie alebo leasing na tento predmet. Neváhajte nás kontaktovať!

Stav: použitý, maximálna hmotnosť nákladu: 14 172 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 11/2014, ďalšia kontrola (TÜV): 11/2025, dĺžka ložného priestoru: 6 300 mm, šírka ložného priestoru: 2 290 mm, celková šírka: 2 550 mm, celková výška: 1 340 mm, Výbava: ABS, Hüffermann Roll-off Trailer HAR 18.63 P 2-axle Roll-off Carrier Trailer Permissible total weight: 18,000 kg Curb weight: 3,828 kg Payload: 14,172 kg Axles: 2 BPW (Bergische Achsen) axles Knorr braking system Leaf suspension Drum brakes Splash guards on all axles Side underrun protection (right and left) Redexfxhhopfx Aqusu Rear underrun protection ABS EBS Air connection coupling heads (red + yellow) 2x 7-pin connector plugs Loading area (LxW): approx. 6,300 x 2,290 mm Container resting height (in driving position): approx. 1,300 mm External dimensions (LxW): approx. 9,200 x 2,550 mm Length without drawbar/tow bar: approx. 6,700 mm 2x container stops (pivoting stoppers) for various container lengths Load securing with pneumatic low-tension locking system with 4 claws 40 mm towing eye Spare wheel holder incl. spare wheel Wheelbase: 4,730 mm Tyres: 385/65R22.5 Tread depth front left: 10 mm Tread depth rear left: 9 mm Tread depth front right: 16 mm Tread depth rear right: 16 mm

Stav: použitý, pohotovostná hmotnosť: 6 400 kg, maximálna hmotnosť nákladu: 23 600 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 01/2013, dĺžka ložného priestoru: 7 800 mm, šírka ložného priestoru: 2 500 mm, výška ložného priestoru: 920 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75R17.5, farba: žltá, najazdené kilometre: 1 001 km, typ prevodu: iný, kabína vodiča: iný, Výbava: ABS, Umiestnenie vozidla: na ceste / v tranzite, 3 osi, otočný oj, listové odpruženie, ABS (protiblokovací systém), uchytné oká, hydraulické nájazdové rampy, zadná podpera, bočné hliníkové ochranné kryty, dvojmontáž kolies. Nadstavba: 3-nápravový nízkopodlažný príves s hydraulickými nájazdovými rampami, pozinkované rampy, 3x 10t nápravy! Všetky údaje sú bez záruky, pretože vozidlo je na ceste! ÚDAJE O PRÍSLUŠENSTVE BEZ ZÁRUKY, zmeny, medzi-predaj a chyby vyhradené! Redpfoy R Ekiox Aquju

Stav: použitý, maximálna hmotnosť nákladu: 10 870 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 06/2025, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2023, Výbava: ABS, KA-TA-R 14.4: ----Braking system: * Wabco ABS * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equaliser unit ----Drawbar / Flange Draw Eye: * Height-adjustable drawbar by approx. 300 mm with 40 mm flange draw eye ----Electrics / Lighting: * 15-pin power connector * Multi-chamber tail lights ----General accessories: * Jost mechanical landing gear at front * Rear: 2 mechanical folding supports * Plastic toolbox approx. 650 x 350 x 320 mm, mounted front right side of the chassis * Bolt-on underrun protection * Plastic quarter mudguards * Net hooks at each position of the central locking as well as 2 on the front wall ----Chassis: * Chassis made from high-tensile fine-grained steel ----Tipper body: * Steel pallet-style 3-way tipper with continuous side walls, top with inner tube reinforcement – without centre stanchions, foldable with drop-side spring assist * Rear posts bolted * Combination steel double rear doors, asymmetrically split – can be swung and locked up to 270°, not foldable – with additional pendulum frame for automatic tailgate opening during tipping, locking via galvanised rotary bolt at the rear and central locking, deactivation function for automatic rear wall operation when reversing tipping with open wing door * 4 mm fine-grained steel floor plate * Rear receiver rail for loading ramps ----Load securing: * 1 x 5 t lashing ring in each corner, and 4 x 3 t lashing eyes each side recessed into the outer frame ----Ramps: * 1 pair of aluminium loading ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tyred & tracked vehicles * Lockable storage compartment under the loading platform rearwards, integrated in chassis, for the ramps ----Tyres: * Tyres: 285/70 19.5 Redpel Th Htefx Aqusu ----Paintwork: * Chassis, drawbar, underrun protection, rear stake, rear folding supports hot-dip galvanised * Axles, springs, air tank and landing gear painted in black tone * Drop-side paintwork in RAL 9010 pure white * Side wall paintwork available in other RAL colours at extra charge ----Info: * Reinforced body with load securing certificate * Vehicle has a day registration (unused) * Subject to errors and prior sale ----Delivery time: Available immediately ex Egestorf

Stav: použitý, maximálna hmotnosť nákladu: 10 870 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 06/2025, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2023, Výbava: ABS, KA-TA-R 14.4: ----Braking System: * Wabco ABS * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Drawbar / Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm, with 40 mm flange drawbar eye ----Electrical System / Lighting: * 15-pin power connector * Multi-chamber tail lights ----General Attachments: * Jost mechanical landing gear at front * 2 mechanical folding supports at rear * Plastic toolbox, approx. 650 x 350 x 320 mm, mounted at the front right side of the chassis * Bolt-on underrun protection * Plastic quarter mudguards * Net hooks at the central locking stanchions and 2 on the front wall ----Chassis: * Chassis made of fine-grained steel ----Tipping Platform: * Steel pallet 3-way tipper body, continuous side walls with internal pipe reinforcement, without central stanchions, foldable with board wall spring lifting device * Rear stanchions bolted * Combined steel double-wing rear doors, asymmetrically divided, can be swung and locked at 270°, not foldable, with additional pendulum frame for automatic rear wall opening when tipping, locking via galvanized rod lock at rear and central locking; deactivation function for automatic rear wall function when tipping backwards with open wing door * 4 mm sheet steel floor made of fine-grained steel * Rear guide rail for loading ramps ----Load Securing: * Each corner features 1 x 5 t lashing ring, plus 4 x 3 t lashing eyes each side recessed in the outer frame ----Ramps: * 1 pair of aluminium approach ramps, approx. 3,570 x 410 mm (load capacity 10 t / pair), suitable for rubber-tyred & tracked vehicles * Lockable storage compartment for the ramps recessed under the loading bed at the rear of the chassis ----Tyres: * Tyres: 285/70 19.5 Redpfx Aqol Th Dujueu ----Paintwork: * Chassis, drawbar, underrun protection, rear stanchion, rear folding supports hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in black tone * Board wall coating in RAL 9010 pure white * Side wall coating available in any RAL color for an additional charge ----Information: * Reinforced body with load securing certificate * Vehicle has a day registration (unused) * Subject to errors and prior sale ----Delivery Time: Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 27 940 kg, celková hmotnosť: 36 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * Wabco-EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t axles * Air suspension with lifting and lowering function as well as RtR valve * Maneuvering aid for shunting purposes activated on the first axle via EBS – no truck-side installation required – when the lift axle is raised + 30 mm ride height * Smart-Board as infotool mounted on trailer with pressure sensors for total axle load display * Last axle as trailing steering axle with electro-pneumatic steering lock Rjdpewh Hdxofx Aquju * Locking of the trailing axle from the driver's cab for maneuvering via EBS (without truck-side installation) * 2" king pin * 1 axle liftable * Lateral underrun protection * Front aluminium drop-down supports and rear swing-down supports on the chassis * Alcoa LVL One aluminium rims * 15-pin electrical connector * LED lighting 12 / 24 V * Removable rear LED beacon * 2 additional LED reversing lights * 2 LED work lights mounted on trailer sides – without truck-side installation * 7-pin socket at rear for overlength lighting * Side marker lights with indicator activation * Tire pressure monitoring with display option in truck via EBS signal (no truck-side installation required) * Mechanically adjustable warning sign packages front and rear * Straight steel wheel arches * Saddle platform with 45° beveled front corners and front toolbox made of galvanized, powder-coated sheet steel W = 2,480 x H = 500 x L = 665 mm with top folding lid and side doors in the beveled corners * 400 mm high aluminium drop sides (RAL 9010 pure white) foldable and removable on the sides of the saddle platform * Rear wall -150 mm- slotted in high * Rear incline on saddle platform to lowbed approx. 700 mm long with checker plate, with a perforated strip at the end for hooking in aluminium loading ramps * Saddle platform and lowbed deck with 50 mm clamped wooden planks * Tread plate over the axles * Preparation for 3 storage compartments under the saddle platform for optional aluminium loading ramps * Swing arm as carrier for connection lines from truck to trailer * Load securing package consisting of: perforated outer frame on saddle platform, 45° angled with hole pattern for lashing equipment (2 t lashing force per point at a min. distance of 480 mm), 2 x 6.3 t recessed lashing rings on each side in the floor, 1 x 16.5 t lashing ring on each side in the approach slope from the low-bed platform to the saddle platform, 2 pairs of 16.5 t lashing rings on low-bed platform (1 x on longitudinal members after the cranking and 1 x over the middle axle next to the longitudinal member), 3 x 13.4 t lashing rings on each side on the outer frame (1 x at the start of the saddle platform cranking, 1 x at the start of the approach slope, 1 x at the end of the approach slope), 3 x 10 t lashing rings on each side (2 x between the front wheel recess and 1st axle, 1 x between 2nd and 3rd axle), 3 x 5 t lashing rings on each side bolted to the outer frames of the wheel recesses (2 on the front and 1 on the rear wheel recess) * Extended excavator boom trough from the end of the last rigid axle over the steering axle to the rear crossmember, continuous with internal reinforcement profile approx. W = 770 mm x D rear = 270 mm / Depth front 170 mm, with 2 x 6.4 t lashing rings each side in the excavator boom trough * 2 wheel recesses on each side, 390 mm deep and 640 mm wide for transport of wheel loaders with a wheelbase of 3,000 – 3,590 mm and tire diameter of 1,

Stav: nový, maximálna hmotnosť nákladu: 38 290 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 500 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle is trailing-steered with electro-pneumatic steering lock ----Suspension: * Air suspension with raising and lowering function as well as RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control unit mounted on the trailer as an info-tool with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting system 12 / 24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Landing gears at the front and mechanical swing-down supports at the rear of the chassis * Straight steel sheet mudguards * Spare wheel carrier mounted on the right side under the chassis ----Low Loader Platform: * Saddle platform with 45° chamfered front corners and front toolbox made of galvanized steel sheet (W = 2,480 x H = 500 x L = 665 mm) with folding lid * 400 mm high aluminum drop sides (RAL 9010 pure white), foldable and removable, on the sides of the saddle platform * Rear wall insert, 150 mm high * Rear slope on the saddle platform to the low-bed section, approx. 700 mm long * Saddle platform with 50 mm wooden planks and low-bed platform with 60 mm wooden planks * Chequer plate over the axles ----Extensions: * 8 x mechanical fold-out extensions to a total width of 3 m, not included in the rear slope (extension planks available stored on the saddle platform) * Mechanically adjustable warning sign packages at front and rear ----Load Securing (Lash Package): * On the saddle platform: 2 x 6.3 t lashing points each, and 3 x 5 t lashing bars per side in the outer frame * On the low-bed platform: 2 x 13.4 t lashing rings per side, and 4 x 10 t lashing rings, swiveling and retractable, integrated in the outer frame * Per side: 2 x 6.4 t lashing eyes, plus 1 lashing point in the excavator arm trough at the rear * 2 x container locks directly behind the gooseneck in the low-bed platform ----Excavator Arm Trough: * Continuous excavator arm trough from the end of the last rigid axle over the steering axle to the end cross member, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Access Ramps: * Mechanical, one-piece, hot-dip galvanized hydraulic access ramps, approx. 3,000 x 720 mm (mechanically adjustable laterally) * 4-way control block for optional future customer retrofitting for hydraulic ramp adjustment * The outer board of the access ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp as well as on the approach slope * Rubber matting on the ramp and approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (with hydraulic pump performance in the truck over 40 l up to 120 l/min) ----Loading Dimensions: Rodpjy Ngzyofx Aquju * Loading area of the saddle platform: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, access ramps, rear fold-down supports, widening consoles hot-dip galvanized * Axles, landing gears, air tanks painted in black shade * Vehicle is hot-dip galvanized ----Info: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Sample images may show e

Stav: nový, maximálna hmotnosť nákladu: 38 290 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 500 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle with trailing steering, electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering system, including RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control unit mounted on the trailer as an infotool with pressure sensors for total axle load display * 15-pin power plug * LED lighting system 12 / 24V * Removable LED warning beacon at the rear left ----General Accessories: * Side underrun protection * Support cranks at the front and mechanical swivel supports at the rear of the chassis Rjdsy Ngz Hopfx Aquou * Straight steel mudguards * Spare wheel carrier mounted on the chassis, right side ----Lowbed Platform: * Fifth wheel platform with 45° beveled front corners and a front toolbox made of galvanized sheet steel, W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high aluminum side boards (RAL 9010 pure white), hinged and removable on the fifth wheel platform * Rear wall - 150 mm - slotted in * Rear ramp on the fifth wheel platform, approximately 700 mm long, into the lowbed * Fifth wheel platform with 50 mm wooden planks, lowbed platform with 60 mm wooden planks * Checker plate above the axles ----Extensions: * 8 x mechanical folding extensions to 3 m overall width; not present on the rear ramp (extension boards provided with storage on the fifth wheel platform) * Mechanically adjustable warning sign packages at the front and rear ----Load Securing (Load Securing Package): * On the fifth wheel platform: 2 x 6.3 t lashing rings each and 3 x 5 t lashing bars per side in the outer frame * On the lowbed platform: 2 x 13.4 t lashing rings per side and 4 x 10 t lashing rings, pivoting and retractable, integrated in the outer frame * 2 x 6.4 t lashing eyes per side and 1 lashing ring at the rear in the excavator arm recess * 2 x container locks directly after the neck on the lowbed platform ----Excavator Arm Recess: * Excavator arm recess continuously from the end of the last rigid axle over the steering axle to the end crossbeam with internal reinforcement profile approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically single-piece, hot-dip galvanized hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control valve block for future customer retrofitting of hydraulic ramp shift * The outer board of the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the ramp slope * Rubber on the ramp and ramp slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck from over 40 l/min up to 120 l/min) ----Loading Dimensions: * Loading area of the fifth wheel platform: approx. 3,935 x 2,480 mm * Lowbed loading area: approx. 8,500 x 2,520 mm * Loading height unladen: approx. 910 mm (including 860 mm ramp slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, ramps, rear folding supports, extension mountings hot-dip galvanized * Axles, support cranks, air tanks painted in black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images may show equipment not included in the offered vehicle * Sample images ----

Stav: použitý, číslo stroja/vozidla: WKESD00000060xxxx, Rok výroby: 2014, Uveďte referenčné číslo na požiadanie: 23349 Špecifikácie: Model 2014 EU schválenie do: 30.06.2026 3 nápravy Zdvih na 1. náprave Vzdialenosť medzi nápravami 1 a 2: 131 cm Užitočné zaťaženie: 34 480 kg Pneumatiky (pozri fotografie) 2 teplotné zóny Chladiaca/mraziaca jednotka Dĺžka nadstavby: 13,414 m Šírka nadstavby: 2,496 m Výška nadstavby: 2,744 m Ihneď k odberu Popis: Na predaj máme chladiarenský náves Krone Cool Liner 3-nápravový z roku 2014 s dvoma teplotnými zónami a chladiacou/mraziacou jednotkou. Náves je plne funkčný a pravidelne sa používa. Môžu sa vyskytnúť drobné kozmetické závady. Ihneď k odberu. Km: 1 STK: Áno EU schválenie do: 30.06.2026 Vlastná hmotnosť: 9020 kg Celková hmotnosť: 43 500 kg Užitočné zaťaženie: 34 480 kg Šírka: 260 cm Dĺžka: 1404 cm Model: Cool Liner 3-nápravový náves s dvoma teplotnými zónami a chladiacou/mraziacou jednotkou = Ďalšie informácie = Rjdpfx Aqey Sfm Teueu Pre viac informácií kontaktujte ATS Norway.

Stav: použitý, maximálna hmotnosť nákladu: 25 750 kg, celková hmotnosť: 36 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 01/2005, celková šírka: 2 550 mm, celková výška: 3 600 mm, Výbava: ABS, Goldhofer 2-nápravový nízkopodlažný náves * Gigant nápravy s bubnovými brzdami * Vzduchové odpruženie * Riadené nápravy * Výstražné majáky * Pracovné reflektory * Pneumatiky 235/75 R17,5 Upozornenie: Vozidlo bolo v roku 2025 repasované. Novo nalakované a technika kompletne prepracovaná. Pre ďalšie informácie sme vám k dispozícii. Rsdpfx Aeyn Tu Aequju

Stav: nový, celková hmotnosť: 78 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 800 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 850 mm, veľkosť pneumatiky: 245/70 R 17.5, farba: sivý, Výbava: ABS, Gooseneck: • Gooseneck in SNT design for load area length optimization, approx. 3,700 mm long, tapered at the rear approx. 1,000 mm x 10° • For tractor units: 4 x 2, 6 x 2, and 6 x 4 Load area: • Load area with extendable design, approx. 8,800 mm long with rear taper approx. 500 mm x 10° • Recess in the load area and extending into the taper for excavator dipper stick accommodation, approx. 3,950 x 580 x 370/450 mm Ramps: • One pair of two-piece steel ramps, approx. 4,350 mm long and approx. 900 mm wide • Hydraulically folding ramp tips • Ramps individually hydraulically adjustable approx. 235 mm outwards and approx. 215 mm inwards • Hardwood covering on the tapered rear of the load area • Ramp with hardwood covering • Square climbing strips, 20 x 30 mm, spaced approx. every 200 mm on the outer ramp frame Axles and tyres: • TWINAXLE-II independent wheel suspension with BPW axle stubs, 1st axle with steering control ahead of pivot, all other axles hydromechanically forced steering • 1st axle with electromagnetic reverse lock activated via reverse gear or manually • Technical axle load: 12,000 kg • Hydraulic axle levelling, hydraulic cylinders with shut-off valves • Tyres: 245/70 R 17.5 • TPMS tyre pressure monitoring system in accordance with ECE R 141 Accessories included: • Plug-in steel front wall, approx. 400 mm high • 4 wheel chocks with holder • Yellow-red air couplings on the front connection bar • 3 kW electro-hydraulic unit for controlling hydraulic functions, except hydraulic winches • 1 spare wheel • 2 pairs of screw-in lashing rings • 1 pair of lying lashing rings in the rear area of the gooseneck • On the gooseneck: 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized • On the gooseneck: 1 plug-in ALU rear board, approx. 400 mm high, anodized • Hardwood covering approx. 40 mm thick over the gooseneck, checker plate covering over the kingpin • 3.5" kingpin • Gooseneck guide plate for the fifth-wheel plate, approx. 500 mm wide • Load area locking with conically welded locking profiles every 250 mm • Pre-tensioning plate included • 1 pair of lashing rings on the front cross member • 8 pairs of recessed lashing rings in the outer frame of the load area, foldable to the outside • Extensions (galvanized) extendable by approx. 230 mm each side • 1 pair of fixed wheel recesses, open up to extension, approx. 700 x 410 mm, in the load area in front of the 1st axle • Wheel recesses with sheet steel covering and square climbing strips 15 x 15 mm, spaced approx. every 200 mm • 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm, in the load area between the 1st and 2nd axle • Wheel recesses with square climbing strips 15 x 15 mm and extensions in the lower section • ALU covers for wheel recesses between the 1st and 2nd axle, can also be used as extension planks • 1 pair of mechanical rear supports • Square climbing strips, 20 x 30 mm, spaced approx. every 200 mm on the outer frame of the rear taper of the load area • Central lubrication system with 1 pump, brand BEKAMAX, with standard grease per NLGI-2 • Radio and wired remote control, with 2 indicator lights on the receiver as single track control Rodpfx Aqsrvw U Ssueu • WABCO Smart Board system • The Smart Board is equipped with an odometer • 4 warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and brackets for rotating beacon