Low loader semitrailer

MEUSBURGER SemiTieflader 2+6 Achs hydraul. gefedert Nr 121

Stav: použitý, pohotovostná hmotnosť: 11 300 kg, maximálna hmotnosť nákladu: 29 700 kg, celková hmotnosť: 41 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 07/2006, zavesenie: vzduch, typ prevodu: iný, kabína vodiča: iný, Výbava: ABS, * Nemecký náves * Špeciálny nízkoložný príves na prepravu úžitkových vozidiel a stavebných strojov * Vyrobený prémiovým výrobcom Estepe z Holandska (Estepe typ E0PL 24-41) * Vďaka dlhoročným skúsenostiam s výrobou takýchto špeciálnych nízkoložných prívesov na prepravu nákladných vozidiel a stavebných strojov boli zohľadnené všetky detaily * Samozrejme s výsuvným hlbokým ložiskom, hydraulickými rampami a hydraulickou plošinou * Špeciálny navijak s diaľkovým ovládaním atď. * Nápravy BPW * 3. náprava – zdvíhacia náprava * Vzduchové odpruženie s funkciou zdvíhania/spúšťania * Centrálne mazanie * Celková povolená hmotnosť: 41 000 kg * Pohotovostná hmotnosť: 11 300 kg * Užitočné zaťaženie: 29 700 kg Ak si želáte nové STK, radi Vám pripravíme ponuku od našich partnerských dielní. Naša ponuka je všeobecne BEZ novej STK, bez nového DGUV, bez novej SP, bez novej UVV. Ďalšie nákladné vozidlá nájdete na našej domovskej stránke na Hovoríme nasledujúcimi jazykmi: nemecky, anglicky, poľsky, turecky Upozornenie: Crjdpfertbb Sjx Akiei Ponúkame a dôrazne odporúčame obhliadku a prehliadku tovaru, aby nevznikli nesprávne predstavy o jeho stave a vhodnosti zo strany kupujúceho. Obhliadka a prehliadka sú kedykoľvek možné po dohodnutí termínu a sú výslovne žiadané. Všetky uvedené údaje sú bez záruky. Za chyby alebo nesprávne údaje v ponuke neručíme. Kupujúci je povinný sám sa presvedčiť o stave a výbave tovaru/vozidla. Zmeny, predbežný predaj a omyly vyhradené.

Stav: nový, maximálna hmotnosť nákladu: 87 500 kg, celková hmotnosť: 120 000 kg, konfigurácia náprav: > 3 nápravy, Typ STZ-VP 8 (245) (3+5) with pendulum axles The specified technical data are only valid when using a 4-axle tractor unit with the following specifications: Dimension "a": 5,400 mm Coupling height (loaded): 1,300 mm Weights & Speed at 80 km/h - Fifth wheel load: 22,000 kg - 30,000 kg - Axle load: 8 x 12,000 kg - Permissible total weight: 120,000 kg - Unladen weight: approx. 32,500 kg - Payload: approx. 87,500 kg (depending on load diagram / easyLOAD calculation) Dimensions - Dimension "b": 21,990 mm - 26,490 mm (total combination length) - Vehicle width: 2,750 - 3,000 mm Gooseneck - Length x width: 3,700 mm x 2,480 mm - Coupling height (loaded): 1,300 mm - Steering radius front/rear: 1,370 mm / 2,835 mm - King pin: 3.5'' 3-axle front bogie - Wheelbase: 2 x 1,510 mm - Single tires: Continental, 245/70 R 17.5 143/141 L (146/146 F) M+S - Steering axle arrangement: counter-steered Excavator bed – single extendable Crsdpfx Akswc Inhsiei - Length x width: 7,000 mm x 3,000 mm - Telescopic extension by/on max. 4,500 mm / 11,500 mm - Construction height: 450 mm - Loading height loaded: approx. 600 mm at 150 mm ground clearance - Boom width: 1,350 mm - Mattresses and booms removable 5-axle rear bogie - Wheelbase: 4 x 1,510 mm - Single tires: Continental, 245/70 R 17.5 143/141 L (146/146 F) M+S - Steering axle arrangement: forced steering Radio remote control

Stav: dobrý (použitý), celková dĺžka: 6 600 mm, celková šírka: 2 750 mm, Prevádzka pomocou hydrauliky nákladného vozidla Upevňovacie body Hydraulicky ovládaný ťažný záves Odnímateľný ťažný záves Výstražné tabule pre nadrozmerný náklad Zadný nárazník s osvetlením Krátka spojka 2,0 palca Centrálny systém mazania Podlahové segmenty 4 x rozšírenie rámu Nástrojová skrinka na ťažnom závese Celková dĺžka: 15 708 mm – 26 008 mm Dĺžka ložnej plochy: 6 600 mm Vysúvanie: 4 300 mm Rozšírenie rámu: 6 000 mm Max. dĺžka ložnej plochy: 16 900 mm Šírka ložnej plochy: 2 750 mm Výška rámu: 380 mm Výška krátkej spojky: 1 295 mm / 1 385 mm = Ďalšie informácie = Rok výroby: 2010 Crsdpfszxn Nbex Akisi Konštrukčný rok: 2010 Hmotnosť v nenaloženom stave: 17 000 kg Nosnosť: 40 600 kg Celková hmotnosť: 57 600 kg Technický stav: dobrý Optický stav: dobrý Výrobca: Goldhofer

Stav: použitý, maximálna hmotnosť nákladu: 175 620 kg, celková hmotnosť: 219 000 kg, konfigurácia náprav: > 3 nápravy, prvá registrácia: 01/2002, Výbava: ABS, STHP 8 (3 + 5) 8 hydraulic BPW pendulum axle units with radio remote control. Technically permitted gross weight: 219,000 kg Technically permitted payload: 175,620 kg Codpfsz N Np Aox Akijri Hydraulically suspended, 8-axle steerable Goldhofer low-bed semi-trailer, type STHP 8 (3+5), consisting of 4 heavy-duty modules with a detachable gooseneck and a telescoping excavator low-bed deck up to 5 meters long, featuring 4 wheel recesses with ABS, and a technically possible payload up to 175,620 kg. Consisting of the following 4 separate heavy-duty module components: 1st Module: Hydraulic universal gooseneck, type STH / ST - Year of manufacture: 2002 - Compatible with heavy-duty module bogies and drive-on loading bridges - Unladen weight: approx. 5,900 kg - Permitted fifth wheel load at front: 35,000 kg - Length: approx. 4.10 m - Coupling height: approx. 1.30 m - King pin: 3.5" bolt - Removable aluminum side boards - Fully hydraulically adjustable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty bogie module - First registration: 14.11.2001 - As a single module, technically possible gross weight: 108,000 kg - Technically possible axle loads: 36,000 kg at 5 km/h - Unladen weight: 10,350 kg - Technically possible payload as a single module: up to 97,650 kg at 5 km/h - 8 hydraulic pendulum axles, 24 tires (215/75/R17.5) - Axle load: 25 t at 20 km/h - Vehicle width: 3 meters - Axle spacing: 1.5 meters - Max. steering angle: ±60° - Integrated in chassis: hydromechanical 2-circuit all-wheel forced steering with a max. steering angle of 60° for the axle units, with integrated hydraulic oil tank - Optimized pin-eye coupling at front and rear for longitudinal combinations - Single-tired pendulum axle units, 8 wheels per axle line - Hydraulic axle compensation +/- 300 mm, hydropneumatic nitrogen suspension - Hydraulic steering for all axles - BPW axles with drum brakes, ABS, and technically possible 34 t axle load at 5 km/h 3rd Module: Extendable heavy-duty low-bed module – excavator deck - Year of manufacture: 2002 - Internal dimensions: approx. 7.50 m length, 3.00 m width, 0.40 m loading height - Construction height: 350 mm - Extendable by approx. 5.00 m – telescopic - 4 wheel recesses with drive-on module at the front end - Construction height in wheel recess area: approx. 150 mm - Load capacity up to 80 t in the low-bed, and 175.6 t in the complete STHP8 (3+5) module combination - Unladen weight: 11,900 kg - Hydraulic pin-eye couplings with claw adapter at front and rear 4th Module: Goldhofer THP/ET5 5-axle heavy-duty bogie module - First registration: 04.01.2002 - Technically possible gross weight: 115,000 kg - Technically possible axle loads: 23,000 kg at 5 km/h - Unladen weight: 14,200 kg - Technically possible payload: up to 100,800 kg - Single-tired hydraulic pendulum axle units, 4 wheels per axle line, 20 tires (285/70 R19.5) - Hydraulic axle compensation +/- 300 mm, hydropneumatic nitrogen suspension - Hydraulic steering for all axles - Radio remote control for steering axles Notes: Up to 3 different tractor-trailer combinations possible with these 4 heavy-duty modules! Payloads vary depending on tractor-trailer configuration. A current manufacturer's certificate from Goldhofer is available for the special low-bed combination. The low-bed can be tested at our facility. Price NET, plus 19% VAT. All information subject to change, errors and interim sale reserved. Internal vehicle number: 2285

Stav: použitý, maximálna hmotnosť nákladu: 175 620 kg, celková hmotnosť: 219 000 kg, konfigurácia náprav: > 3 nápravy, prvá registrácia: 01/2002, Výbava: ABS, STHP 8 (3 + 5) 8 hydraulic BPW pendulum axle units with radio remote control. Technically permitted gross weight: 219,000 kg Technically permitted payload: 175,620 kg Hydraulically suspended, 8-axle steerable Goldhofer low-bed semi-trailer, type STHP 8 (3+5), consisting of 4 heavy-duty modules with a detachable gooseneck and a telescoping excavator low-bed deck up to 5 meters long, featuring 4 wheel recesses with ABS, and a technically possible payload up to 175,620 kg. Consisting of the following 4 separate heavy-duty module components: 1st Module: Hydraulic universal gooseneck, type STH / ST - Year of manufacture: 2002 - Compatible with heavy-duty module bogies and drive-on loading bridges - Unladen weight: approx. 5,900 kg - Permitted fifth wheel load at front: 35,000 kg - Length: approx. 4.10 m - Coupling height: approx. 1.30 m - King pin: 3.5" bolt - Removable aluminum side boards - Fully hydraulically adjustable Codpfez N Nrkox Akijri 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty bogie module - First registration: 14.11.2001 - As a single module, technically possible gross weight: 108,000 kg - Technically possible axle loads: 36,000 kg at 5 km/h - Unladen weight: 10,350 kg - Technically possible payload as a single module: up to 97,650 kg at 5 km/h - 8 hydraulic pendulum axles, 24 tires (215/75/R17.5) - Axle load: 25 t at 20 km/h - Vehicle width: 3 meters - Axle spacing: 1.5 meters - Max. steering angle: ±60° - Integrated in chassis: hydromechanical 2-circuit all-wheel forced steering with a max. steering angle of 60° for the axle units, with integrated hydraulic oil tank - Optimized pin-eye coupling at front and rear for longitudinal combinations - Single-tired pendulum axle units, 8 wheels per axle line - Hydraulic axle compensation +/- 300 mm, hydropneumatic nitrogen suspension - Hydraulic steering for all axles - BPW axles with drum brakes, ABS, and technically possible 34 t axle load at 5 km/h 3rd Module: Extendable heavy-duty low-bed module – excavator deck - Year of manufacture: 2002 - Internal dimensions: approx. 7.50 m length, 3.00 m width, 0.40 m loading height - Construction height: 350 mm - Extendable by approx. 5.00 m – telescopic - 4 wheel recesses with drive-on module at the front end - Construction height in wheel recess area: approx. 150 mm - Load capacity up to 80 t in the low-bed, and 175.6 t in the complete STHP8 (3+5) module combination - Unladen weight: 11,900 kg - Hydraulic pin-eye couplings with claw adapter at front and rear 4th Module: Goldhofer THP/ET5 5-axle heavy-duty bogie module - First registration: 04.01.2002 - Technically possible gross weight: 115,000 kg - Technically possible axle loads: 23,000 kg at 5 km/h - Unladen weight: 14,200 kg - Technically possible payload: up to 100,800 kg - Single-tired hydraulic pendulum axle units, 4 wheels per axle line, 20 tires (285/70 R19.5) - Hydraulic axle compensation +/- 300 mm, hydropneumatic nitrogen suspension - Hydraulic steering for all axles - Radio remote control for steering axles Notes: Up to 3 different tractor-trailer combinations possible with these 4 heavy-duty modules! Payloads vary depending on tractor-trailer configuration. A current manufacturer's certificate from Goldhofer is available for the special low-bed combination. The low-bed can be tested at our facility. Price NET, plus 19% VAT. All information subject to change, errors and interim sale reserved. Internal vehicle number: 2285

Stav: použitý, celková hmotnosť: 54 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 06/2008, Výbava: ABS, Identifikačné číslo vozidla: WG0STZV3580032220 Prvá registrácia: 24.06.2008 Nemecká technická kontrola (HU) je splatná Vlastná hmotnosť: 14.900 – 18.000 kg Odnímateľný labutí krk Oje Ø 3,5 " ---Dĺžka podlahy: 7.800 mm – Nakladacia výška: cca 470 mm TELESKOPICKÉ predĺženie o 5.400 mm ROZŠÍRITEĽNÁ KOLISKY NA KOLESÁ Podvozkový rám: 4.100 mm Credpfx Akexwf Tnsisi Výklenok na rýpadlo – Výklenok na násadu Centrálne mazanie Nápravy BPW Eco s bubnovými brzdami a diaľkovým ovládaním 3x hydraulicky nútene riadené nápravy Zaťaženie náprav: 3x 10.000 kg Odnímateľný labutí krk – Sattelová zaťaž: 24.000 kg Centrálne mazanie Pneumatiky: 235/75 R 17,5 Zmeny, medzičasný predaj a chyby sú výslovne vyhradené. Popis slúži na všeobecnú identifikáciu vozidla a nepredstavuje záruku v zmysle kúpneho práva. Rozhodujúci je popis podľa kúpnej zmluvy. Naša ponuka je vo všeobecnosti bez novej technickej kontroly (TÜV). Ak si prajete novú technickú kontrolu TÜV, radi Vám poskytneme ponuku našich partnerských servisov! Vozidlo môže byť polepené alebo označené reklamou. Platné sú naše všeobecné dodacie a platobné podmienky.

Stav: použitý, maximálna hmotnosť nákladu: 175 620 kg, celková hmotnosť: 219 000 kg, konfigurácia náprav: > 3 nápravy, prvá registrácia: 01/2002, Výbava: ABS, STHP 8 (3 + 5) 8 hydraulic BPW pendle axle units with radio remote control. Technical total weight: 219,000 kg possible Technical payload: 175,620 kg possible Hydraulically suspended and 8-axle steerable Goldhofer low-bed semi-trailer, type STHP 8 (3+5), consisting of 4 heavy-duty modules with a detachable gooseneck and extendable excavator trough (up to 5 meters long) with 4 wheel recesses and ABS, allowing up to 175,620 kg payload (technically possible). Comprising the following 4 separate heavy-duty module components: 1st Module: Hydraulic universal gooseneck, type STH/ST - Year of manufacture: 2002 - Compatible with heavy-duty module chassis, with drive-over load decks - Unladen weight: approx. 5,900 kg - Permitted fifth wheel load at front: 35,000 kg - Length: approx. 4.10 m - Fifth wheel height: approx. 1.30 m - King pin: 3.5" bolt - Plug-in aluminium side boards - Fully hydraulically adjustable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty chassis module - First registration: 14.11.2001 - As a single module, technical total weight: 108,000 kg; technical axle load possible: 36,000 kg at 5 km/h - Unladen weight: 10,350 kg - As a single module, technical payload up to 97,650 kg possible at 5 km/h - 8 hydraulic pendle axles, 24 wheels with 215/75/R17.5 tyres - Axle load: 25 t at 20 km/h - Vehicle width: 3 meters - Axle spacing: 1.5 meters - Max. steering angle: ±60° - Chassis-integrated, hydromechanical 2-circuit all-wheel forced steering with max. steering angle of 60° for the axle units and integrated hydraulic oil tank - Optimised bolt-tab coupling system front and rear for longitudinal combinations - Single-tyred pendle axle units, 8 wheels per axle line - Hydraulic axle compensation +/- 300 mm, hydropneumatic gas storage suspension - Hydraulic steering for all axles Codpfxez N Nqas Akijri - BPW axles with drum brakes and ABS; technical axle load up to 34 t at 5 km/h 3rd Module: Extendable low-bed heavy-duty module – excavator bridge - Year of manufacture: 2002 - Internal dimensions: approx. 7.50 m long, 3.00 m wide, loading height 0.40 m - Construction height: 350 mm - Extendable up to approx. 5.00 m – telescopic - 4 wheel recesses with drive-on module at the head section - Construction height in wheel recess area: approx. 150 mm - Load capacity up to 80 t in low-bed and 175.6 t in total module STHP 8 (3+5) possible - Unladen weight: 11,900 kg - Hydraulic bolt-tab coupling at front and rear with claw coupling adapter 4th Module: Goldhofer THP/ET5 5-axle heavy-duty chassis module - First registration: 04.01.2002 - Technically possible total weight: 115,000 kg; technically possible axle loads: 23,000 kg at 5 km/h - Unladen weight: 14,200 kg - Technical payload up to 100,800 kg possible - Single-tyred hydraulic pendle axle units, 4 wheels per axle line, 20 wheels, 285/70 R 19.5 tyres - Hydraulic axle compensation +/- 300 mm, hydropneumatic gas storage suspension - Hydraulic steering for all axles - Radio remote control for steering axles Note: With the 4 heavy-duty modules, up to 3 different tractor combinations are possible! Payloads vary depending on the tractor combination. A current manufacturer’s certificate from Goldhofer is available for the special low-bed combination. The low-bed unit can be inspected and tested at our premises. Net price plus 19% VAT. All information without guarantee. Subject to errors and prior sale. Internal vehicle number: 2285 Advert also available in English.