Faymonville Max Trailer Max200 Telesattel kúpiť použité (29 698)

Stav: nový, pohotovostná hmotnosť: 13 250 kg, maximálna hmotnosť nákladu: 47 550 kg, celková hmotnosť: 60 800 kg, konfigurácia náprav: 3 nápravy, zavesenie: vzduch, veľkosť pneumatiky: 245/70 r17.5, farba: sivý, Výbava: ABS, Gooseneck: Gooseneck with rear chamfer of approx. 750 mm x 10°. 3 pairs of lashing rings 30 mm thick hardwood flooring Extendable loading platform: Extendable loading platform with rear chamfer of approx. 1,000 mm x 8° 5 pairs of hinged lashing rings (can be folded outward) 3 pairs of hinged lashing rings (can be folded outward) 1 pair of horizontal lashing rings at the front of the loading platform Cutouts in the outer frame of the loading platform for hooking in tensioning straps Hardwood floor approx. 48 mm thick, anti-slip checker plate over the axles Two-part steel ramps: One pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood overlay. Ramps with hydraulically extendable and retractable ramp sections, hydraulic lifting device, and hydraulically adjustable. Maximum load capacity per pair: 40,000 kg Hfedpfsl Uxdkjx Aqleg Landing legs: JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test capacity) Axles and tires: BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanical forced steering Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tools Tires: 245/70 R 17.5 Brake system: Brake system compliant with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit Steel construction: Steel construction made of high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Paintwork: Top-quality, durable corrosion protection of the standard shot-blasted welded frame guaranteed by a two-component (2K) zinc-rich primer High-quality single-color 2-component (2K) top coat in Nova Grey Rear section metalized and painted in RAL 9010 (pure white) No metallic paints possible Electrical system: Electrical system according to EU specifications, 24 volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets Connection as per ISO 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Accessories included: 2" kingpin Galvanized steel front wall approx. 400 mm high Yellow-red air couplings on the galvanized connection bar at the front 4 wheel chocks with holder at the front wall One spare wheel with holder in front of the front wall Electro-hydraulic power pack Remote steering from front and rear via cable remote control with push-button operation and single trace axle control Mount at the rear of the gooseneck for ALU loading ramps European reflective panels (red-yellow) at the rear of the trailer White reflective striping according to EU regulations at the side, at the extension element, and rear in red On the gooseneck and ramps left and right, each with one bracket for warning signs including socket A bracket for a revolving beacon at the rear of the trailer Galvanized folding supports under the chamfer of the loading area Control valves for ramps mounted on the right side of the trailer Cover plates for bridging the gap between ramps and loading area One mudflap at the rear of the trailer Manual and documentation on USB stick Central lubrication system BEKAMAX (Pico) with standard NLGI-2 grease and removable pump guard On the gooseneck, removable ALU side boards and rear board approx. 2,440 x 400 mm Rear galvanized removable stanchions, body length approx. 2,560 mm A toolbox INOX 1,350x400x400 on the gooseneck, box covers oil fill 4 pairs of WADER container locks in the loading platform for one

Stav: nový, maximálna hmotnosť nákladu: 38 100 kg, celková hmotnosť: 50 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 100 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 760 mm, zavesenie: vzduch, veľkosť pneumatiky: 205/65 R17.5 3PMSF, farba: sivý, Výbava: ABS, Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading platform: 5 pairs of folding lashing rings on the outside 3 pairs of folding lashing rings on the outside 1 pair of horizontal lashing rings at the front of the loading platform Cutouts in the outer frame of the loading platform for attaching tie-down straps Approx. 48 mm thick hardwood flooring, over the axles with checker plate covering Hjdpfx Ajtphtmjqlsfg Landing gear: JOST landing legs with 2-speed gearbox for 24 t lifting capacity Axles and tyres: BPW axles, two fixed and two self-steering axles, air suspension, drum brakes, with raise/lower function The self-steering axles can be locked for reversing via electromagnet, activated through reverse gear or manually Axle tools Tyres 205/65 R17.5 3PMSF Braking system: WABCO braking system according to EU regulations with EBS-E Steel construction: High-strength fine grain steel frame Steel grades: S355J2+N/S355MC S690QL/S700MC Electrical equipment: Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets Connection in accordance with ISO Paintwork: Premium, durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component zinc dust primer High-quality 2-component top coat, single color in MB 7350 Novagrau Metallic paint not available Rear section metallized and painted in RAL 9010 Standard equipment included: 1 spare wheel 205/65 R 17.5 TPMS tire pressure monitoring system in accordance with ECE R 141 At the galvanized front connection strip: yellow-red air couplings 4 wheel chocks with brackets on the front wall Mounting at the rear of the gooseneck for ALU loading ramps Galvanized folding supports underneath the sloped section of the loading area One bracket for a rotating beacon at the rear of the trailer Height-adjustable curtain structure Galvanized front wall with a tensioning mechanism for the sliding curtains Adjustable height approx. 400 mm "EDSCHA" brand roof, forward-sliding on ALU roof beam profiles, bolted to front and rear walls 3 pairs of sliding stanchions on the loading area The superstructure can be hydraulically extended at the rear left and right by approx. 750 mm Sliding roof with lift-up portal beam Sliding curtain with 700 mm extra length, with tensioning straps approx. every 600 mm Height to top edge of superstructure approx. 3,960 mm Driving with open sliding roof is not permitted and will cause damage to the curtain Hanger bar for ALU loading ramps at the rear of the vehicle On the gooseneck and on the left and right of the rear panel, each with a bracket for warning signs including socket Mudflap at the rear of the trailer European reflective plates at the rear of the trailer 7 pairs of stake pockets for 100 x 50 mm insertable stakes in the outer frame of the loading platform Lifting axle on the front axle controlled by TEBS E depending on current axle load and loading condition Superstructure at the rear with closed ALU swing doors On the checker plate on the gooseneck and loading area, an integrated sand coating to prevent slipping Central lubrication system BEKAMAX with standard grease NLGI-2 and removable pump guard 80 km/h speed stickers at the rear and on both sides Load gauge for axle load determination including load diagram

Stav: nový, pohotovostná hmotnosť: 34 500 kg, maximálna hmotnosť nákladu: 106 700 kg, celková hmotnosť: 141 200 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 7 150 mm, šírka ložného priestoru: 2 850 mm, výška ložného priestoru: 580 mm, veľkosť pneumatiky: 285/70 R19.5, farba: sivý, prevádzková hmotnosť: 34 500 kg, Výbava: ABS, Gooseneck: - Gooseneck hydraulically liftable/lowerable and detachable - Length approx. 3,650 mm - Extensive lashing positions - For tractor units: 6 x 4 or 8 x 4 3-Axle Compact Front Undercarriage: - Hook mountings at front and rear - Undercarriage length x width approx. 3,560 mm x 2,850 mm - Extensive lashing positions Excavator Deck “BB-A”: - Telescopic excavator deck “BB-A” with drive-over deck hooks at the front and pin-lug coupling at the rear - Length x base width approx. 7,150 mm x 2,850 mm - Beam height x width approx. 430 mm x 1,350 mm - Loading height 580 mm with ground clearance of 150 mm - 5 pairs of hanging lashing rings (LC 10,600 daN) - 4 pairs of M30 threaded blocks on the inner beam for mounting screwable rings 5-Axle Rear Undercarriage: - Mechanical pin-lug coupling at the front for low bed attachment; end cross-member at the rear - Undercarriage length x width approx. 6,840 mm x 2,850 mm - Extensive lashing positions Pendulum Axle and Tyres (front and rear undercarriage): - "PENDULUM AXLE", all axles hydro-mechanically forced steered - Hose rupture valve on axle balancing cylinders with automatic RESET function - Hydraulic cylinders fitted with shut-off taps and locking plugs for securing in raised position - Final coating of axles with two layers of 2K paint, single color MB 7350 Novagrau - Technical axle load: 14,640 kg (62 km/h) - Hydraulic axle compensation - Axle tools Hsdpewhywfjfx Aqlofg - Tyres: 285/70 R19.5 Remote Steering (Follow-up Steering): - Remote steering from front and rear operable via cable remote control with push buttons, with axle tracking monitoring - Socket for remote steering operation at the gooseneck - Cable remote control with push buttons including axle tracking monitoring Accessories included: - Yellow-red air couplings on galvanized front connection rail - Steel front wall approx. 400 mm high - 4 wheel chocks with holders - 2 spare wheels 285/70 R19.5 - 3.5" king pin - Boom with winch for spare wheel at gooseneck front - Truck hydraulic connection with flow regulator (40 l/min), including boom for suspending service lines; tractor unit tank must have at least 80 liters capacity with connectors - White reflective tape according to EU regulations on the sides and on the extension, red at the rear - Plug-in ALU side boards and tailgate on the gooseneck, approx. 400 mm high, anodized - Control levers on the gooseneck protected by a foldable cover - Separate air connection with air gun at the gooseneck - Central lubrication system BEKAMAX with standard grease NLGI-2, 1x at the gooseneck, 1x at the 3-axle undercarriage, 1x at the 5-axle undercarriage - Variomax tool kit - Multi-coupling hydraulic connections at low bed hook area - Front undercarriage with separate air connection for pneumatic tools - Threaded insert option (ø 40 mm) every approx. 500 mm on the outer web of the excavator deck for screw rings - Foldable width extensions with steel inlays, adjustable from approx. 2,850 mm to 3,250 mm - Steel inlays with approx. 12 mm thick rubber covering - Two INOX toolboxes 855 x 340 x 390 mm - Radio remote control for steering in addition to cable remote control - Sand layer coating as anti-slip protection - 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery

Stav: nový, pohotovostná hmotnosť: 12 900 kg, maximálna hmotnosť nákladu: 34 100 kg, celková hmotnosť: 47 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 850 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 350 mm, zavesenie: iný, veľkosť pneumatiky: 245/70 R 17,5, farba: sivý, prevádzková hmotnosť: 12 900 kg, Výbava: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading platform length, approx. 3,750 mm - Gooseneck hydraulically liftable/lowerable and removable - Technical fifth wheel load: 23,000 kg - Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4 Loading Platform: - Low bed with external beams, extendable “SUPER LOW” design, approx. 6,850 mm long - Low bed with fixed hardwood floor approx. 40 mm thick and mechanical locking Rear Chassis: - Rear chassis with closed outer frame, chequer plate covering, and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear - 2 pairs of lashing rings foldable outwards Hfedpfx Aqohlz R Sjlsg - 1 pair of lashing rings mounted flat in the trough - 2 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame Pendulum Axle and Tyres: - “PENDEL-AXLE”, all axles hydromechanically forced-steered - Burst protection valve on the axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pre-inserts for securing in raised position - Axles finished with two layers of single-colour 2K paint in "FAY-Grey-34-0260" - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres 245/70 R 17.5 - TPMS tyre pressure monitoring system according to ECE R 141 Accessories: - Prepared for mounting bolt-on container locks for 1x 20ft or 1x 40ft container on the outer beams - 2" kingpin - Galvanised steel front wall, approx. 400 mm high - One spare wheel - At the galvanised connection rail front, yellow-red air couplings - 4 wheel chocks - Forced steering from front and rear controlled via cable remote control with push buttons, includes single-track monitoring of axles - Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings - Electro-hydraulic power pack - White reflective tape on the sides, the extension, and the rear in accordance with EU regulations - European reflective panels (red-yellow) at the rear of the trailer - Brackets at the gooseneck and rear panel left/right for warning signs, including socket - 6 pairs of threaded blocks between lashing rings under the top flange on the outer beam for mounting bolt-on RUD VLBG-4 rings - Plug-in ALU sidewalls and rear wall on the gooseneck approx. 2,440 x 400 mm - The rear galvanised plug-in stakes are removable (body length approx. 2,560 mm) - Gooseneck rear upper area closed with removable cover - 5 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading platform - Folding widening pieces, approx. 230 mm per side - 2 pairs of bolt-on RUD VLBG-4 M24 rings (LC 8,000 daN) - 1 pair of steel ramps for bridging the low bed towing hook - On the loading platform, a coated sand layer as anti-slip protection - 80 km/h speed stickers at the rear and both sides - Rear part of the driving gear’s dipper stick trough covered by a plug-in plate - Four retractable warning boards approx. 423 x 423 mm, extendable by approx. 400 mm - Radio remote control for forced steering, in addition to cable control, with indicator lights on the receiver for axle single-track monitoring - Central lubrication system with 2 BEKAMAX (Pico) pumps using standard NLGI-2 grease - Load gauge for determining axle loads - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible surfaces are metallized with ZINACOR 850 (zinc 85% - alu 15%) and hot-finished

Stav: nový, maximálna hmotnosť nákladu: 49 000 kg, celková hmotnosť: 60 800 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 r 17.5, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck with chamfered front corners at 45° and rear chamfer of approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable Loading Area: - Extendable loading area with rear chamfer of approx. 1,000 mm x 8° - 5 pairs of fold-out lashing rings on the outside (LC 5,000 daN) - 3 pairs of fold-out lashing rings on the outside (LC 10,000 daN) - 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) - Cut-outs in the external frame of the loading area for attaching tie-down straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, with chequered plate covering over the axles Detachable Two-Part Ramps: - One pair of galvanized, two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood overlay - Ramps with hydraulically folding ramp sections, hydraulic lift and hydraulically adjustable side shift - Max. load per pair: 40,000 kg Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and Tyres: - BPW axles, two rigid axles, two self-steering axles, air-suspended, with drum brakes, lifting/lowering function - The self-steering axles can be locked via electromagnetic reverse lock through reverse gear or manually - Axle tools - Tyres: 235/75 R 17.5 Brake System: - Brake system in accordance with EU regulations with EBS-E (4S3M) Steel Construction: - Steel construction made from high-strength fine-grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Paintwork: - Premium and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc-rich primer - High-quality 2-component (2K) topcoat in single-tone Novagrey Electrical System: - Electrical system according to EU regulations, ASPÖCK-NORDIK (ASS3) 24 Volt lighting - ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets Included Accessories: - 2" king pin - One galvanized steel front wall, approx. 400 mm high - One spare wheel with holder in front of the front wall - Yellow and red air couplings on galvanized front terminal strip - 4 wheel chocks with holder on the front wall Hfodpfx Ajh Etf Rsqlsg - Mounting at the rear of the gooseneck for ALU approach ramps - Galvanized folding supports under the chamfered loading area - Bracket for a rotating beacon - Cover plates to bridge the gap between ramps and loading area - White reflective tape according to EU regulations on the sides, red at the rear and on the extension - Electro-hydraulic power unit - At the gooseneck and on the ramps, left and right, each with mounting for warning panels including socket - Control valves for the ramps mounted on the right side of the semi-trailer - Mudflap at the rear of the trailer - User manual and description on USB stick - Removable ALU side boards and rear panel on the gooseneck, approx. 2,440 x 400 mm - Rear galvanized stanchions removable (body length approx. 2,560 mm) - 4 pairs of WADER container pockets in the loading area for a 20 ft, 2x 20 ft or a 40 ft container - 7 pairs of stake pockets for 100 x 50 mm stakes in the external frame of the loading area - Extensions, galvanized, retractable by approx. 230 mm per side - Lift axle on the front axle with control - 20 x 20 mm square climbing strips - BEKAMAX central lubrication system - Four warning panels extendable by approx. 400 mm (approx. 423 x 423 mm)

Stav: nový, pohotovostná hmotnosť: 17 500 kg, maximálna hmotnosť nákladu: 43 500 kg, celková hmotnosť: 61 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 7 550 mm, šírka ložného priestoru: 2 750 mm, výška ložného priestoru: 400 mm, veľkosť pneumatiky: 245/70 R 17.5, farba: sivý, Výbava: ABS, Neck (Gooseneck): - Gooseneck in SNT design for optimizing loading platform length, approx. 3,750 mm long - Gooseneck hydraulically liftable/lowerable and detachable Hfjdpfeh Hm Thjx Aqlog - For tractor units: 6x4 or 8x4 Deck (Lowbed): - Lowbed with external beams, extendable design, "SUPER LOW" type, approx. 7,550 mm long - Lowbed with fixed hardwood floor, approx. 40 mm thick, with mechanical locking - Service lines protected and routed within the extendable beams, automatically adjusting to the respective lowbed length Rear chassis: - Rear chassis with closed outer frame, checker plate surface, and continuous prism excavator trough, approx. 1,450/900 x 505 mm, open at the rear - 2 pairs of stake pockets (100 x 50 mm) on the outer frame for plug-in stakes Axles and tires: - "PENDULUM AXLE", all axles forced-steered hydromechanically - Burst pipe valve to axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and plug pin for securing in raised position - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tires 245/70 R 17.5 / 3PMSF Accessories included: - Prepared for mounted container locks for 1x 20ft or 1x 40ft container on outer beams - 2" king pin - One galvanized steel front wall, approx. 400 mm high - One spare wheel with holder - Yellow-red air couplings on the galvanized front connector strip - 4 wheel chocks - Remote steering front and rear operated by wire remote control via pushbuttons, with single-track axle alignment control - Hydraulic couplings between gooseneck and lowbed as multi-coupling instead of screw type - Electro-hydraulic power pack - White reflective tape as per EU regulations on the sides, at the extension and red on the rear - 2 wooden blocks 500x250x200 mm - European reflective warning panels (red-yellow) at trailer rear - On gooseneck and rear section: holders for warning signs with sockets left and right - Central lubrication system with 2 BEKAMAX (Pico) pumps, standard grease NLGI-2 - Load gauge to determine axle loads, incl. load chart - On gooseneck, plug-in aluminum side walls and rear wall approx. 2,000 x 400 mm - Rear galvanized plug-in stakes removable (body length approx. 2,120 mm) - Separate air connection with air gun on the gooseneck - Duomatic air coupling from gooseneck to lowbed - Gooseneck closed at rear upper section with removable cover - 1 pair of steel ramps for bridging the lowbed receptacle hooks - Four approx. 400 mm extendable warning signs, approx. 423 x 423 mm - Radio remote control for rear steering in addition to cable remote, with receiver indicator lights for single-track alignment - 6 pairs threaded blocks between lashing rings under top chord on outer beam for installation of screwable RUD rings VLBG-4 - 7 pairs of stake pockets (100 x 50 mm) in outer frame of load platform - Folding extensions, approx. 230 mm per side - Anti-slip sand coating painted on load platform - Dipper stick trough at front and rear of rear chassis closed with plug-in plates - HRM Metallization (High Resistance Metallization) of the outer frame - Complete steel construction shot-blasted, then defined visible surfaces metallized with ZINACOR 850 (Zinc 85% - Alu 15%) by hot finishing

Stav: nový, pohotovostná hmotnosť: 15 420 kg, maximálna hmotnosť nákladu: 61 080 kg, celková hmotnosť: 76 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 900 mm, veľkosť pneumatiky: 235/75/r17,5, farba: sivý, Výbava: ABS, Gooseneck: Gooseneck with rear bevel of approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading Area: Extendable loading area with rear bevel of approx. 500 mm x 8° 8 pairs of folding outward lashing rings 1 pair of flat lashing rings at the front of the loading area Cutouts in the outer frame of the loading area for securing load straps Approx. 48 mm thick hardwood flooring, non-slip checker plate cover above the axles Two-piece Steel Ramps: One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering. Ramp parts are hydraulically foldable, equipped with hydraulic lifting mechanism and hydraulic lateral adjustment. Maximum load per pair: 50,000 kg. Landing Legs: • JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: BPW axles and suspension, 4th and 5th axle steering Technical axle load: 12,000 kg 4th and 5th axles with electromagnetic reverse lock activated via reverse gear and manual operation Tyres 235/75 R 17.5 3PMSF Braking System: Braking system according to EU regulations with EBS-E (4S3M) Sockets and Lighting: Electrical system according to EU regulations, 24-volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets Connections according to ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paintwork: First-class and durable corrosion protection, achieved by standard shot-blasted welded frame with a 2-component (2K) zinc dust primer High-quality single color 2-component (2K) topcoat in MB 7350 Novagrau Hfodpfel Sl Izsx Aqlsg Rear section metallized and painted in RAL 9010 (Pure White) Metallic lacquer not available Steel Structure: Steel construction made from high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Accessories: One spare wheel with bracket in front of the bulkhead 2" kingpin Galvanized steel front wall approx. 400 mm high Yellow-red air couplings on the galvanized front connector strip 2 wheel chocks with holders on the front wall Provision at the rear of the gooseneck for ALU drive-on ramps Bracket for a beacon at the rear of the trailer Galvanized supports under the rear bevel of the loading area White reflector tape according to EU regulations on the sides, at the extension and rear red Electro-hydraulic unit at the rear under the loading area On gooseneck and rear panel (left and right) bracket for warning signs incl. socket Control valves for the ramps installed on the right side of the trailer A mud flap at the rear of the trailer Manual and description on USB stick 3.5" kingpin supplied loose On the gooseneck, plug-in ALU side walls and rear wall approx. 2,440 x 400 mm (LxH) Rear galvanized plug-in stakes are removable (Length of the structure approx. 2,560 mm) 3 pairs of WADER container pockets on the loading area for one 20' (30') or a 40' container 6 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading area Galvanized extensions, extendable by approx. 230 mm per side Lifting axle on the front axle, control via TEBS-E depending on current axle load and loading status Square climb strips 20 x 20 mm, every 200 mm on the outer frame of the loading area bevel On the checker plates, above the kingpin and the loa

Stav: nový, pohotovostná hmotnosť: 9 500 kg, maximálna hmotnosť nákladu: 35 500 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 500 mm, šírka ložného priestoru: 2 540 mm, zavesenie: vzduch, veľkosť pneumatiky: 435/50 R 19.5, farba: sivý, prevádzková hmotnosť: 9 500 kg, Výbava: ABS, Nakladacia plocha v vysunuteľnom vyhotovení: Nakladacia plocha s tvrdými drevenými doskami so zadnou skosením cca 1.000 mm x 8° 1 pár pevne zabudovaných kolísk na kolesá, cca 1.610 x 970 x 400 mm 2 páry upevňovacích krúžkov (LC 5.000 daN) 1 pár upevňovacích krúžkov (LC 10.000 daN) 6 párov smerom von sklopných upevňovacích krúžkov (LC 5.000 daN) 2 páry smerom von sklopných upevňovacích krúžkov (LC 10.000 daN) Výrezy v vonkajšom ráme nakladacej plochy na upevnenie napínacích pásov (LC 2.000 daN) Brzdový systém: Brzdový systém podľa noriem EÚ s EBS-E (2S2M) Hedek Eammopfx Aqlefg Lak: Prvotriedna a odolná ochrana proti korózii štandardne guľôčkovo tryskanej zváranej konštrukcie vďaka 2-komponentnej (2K) zinkovej základnej vrstve s práškovým zinkom Vysokokvalitný 2-komponentný (2K) vrchný náter v jednej farbe v odtieni Novagrau Zadná časť metalizovaná a lakovaná v RAL 9010 (čistá biela) Metalický lak nie je možný Návesové podpery: JOST návesové podpery (mechanické) s 2-rýchlostnou prevodovkou, nosnosť 24 t (skúšobná záťaž 50 t) Oceľová konštrukcia: Oceľová konštrukcia z vysokopevnostnej jemnozrnnej ocele Kvalita ocele: S355J2+N/S355MC (medza klzu 355 MPa) S690QL/S700MC (medza klzu 690 MPa) Elektrická inštalácia: Elektrická inštalácia podľa noriem EÚ, osvetlenie 24 voltov Zásuvky 24N, 24S & 15-kolíková Nápravy a pneumatiky: BPW nápravy, vzduchovo odpružené, s kotúčovými brzdami (377 mm), s funkciou zdvíhania/spúšťania Samosmerovacie nápravy s elektro-magnetickou spätnou blokáciou, aktivovanou spiatočkou alebo manuálne Nápravové náradie Pneumatiky 435/50 R 19.5 Zahrnuté príslušenstvo: Na pozinkovanej prednej prípojnici žlto-červené vzduchové spojky 4 kusy klinov s držiakom 2" kónusový čap Pozinkovaná čelná stena z ocele, výška cca 1600 mm. EN12642-XL Biela reflexná páska podľa predpisov EÚ po bokoch, na výsuvu a vzadu červená Nakladacia plocha so silnou podlahou z tvrdého dreva 9 párov zásuvných vreciek na stĺpiky 100 x 50 mm vo vonkajšom ráme nakladacej plochy 1 držiak na rezervné koleso pod nakladacou plochou v smere jazdy vpravo Pozinkované výklopné podpery pod skosením nakladacej plochy Posuvné zavesovacie lišty na ALU nájazdové rampy na zadnej časti vozidla Európske reflexné tabule (červeno-žlté) na zadnej časti návesu Odstredivý záchyt na zadnej časti návesu Držiak na výstražné svetlo na zadnej časti návesu Na labutom krku a na zadnom nosníku naľavo a napravo držiak na výstražné tabule vrátane zásuvky HDPE náradový box 620x360x610 pod nakladacou plochou v smere jazdy naľavo 4 páry WADER kontajnerových vreciek v nakladacej ploche pre 1x 20ft-kontajner alebo 1x 40ft-kontajner, vo výsuve je pripravené ďalšie uzamknutie pre 45ft-kontajner 3 páry priečnych zásuvných líšt na stĺpiky 100 x 50 mm Zdvihacia náprava na prednej náprave s riadením cez TEBS E v závislosti na aktuálnom zaťažení náprav a aktuálnom stave naloženia Rýchlostná nálepka 80 km/h vzadu a na oboch stranách Štyri približne o 400 mm vysúvateľné výstražné tabule cca 423 x 423 mm s LED pozičnou lampou. Na výstražných tabuliach držiak pre výstražné svetlo Manometer na meranie záťaže na nápravy vrátane diagramu zaťaženia HRM metalizácia (High Resistance Metallisation) vonkajšieho rámu Kompletná oceľová konštrukcia guľôčkovo tryskaná, následne definované viditeľné plochy metalizované

Stav: nový, pohotovostná hmotnosť: 10 600 kg, maximálna hmotnosť nákladu: 35 400 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 500 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 940 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Výbava: ABS, Load platform: - Extendable load platform - Load platform with hardwood planks, rear bevel approx. 500 mm x 8° - 2 pairs of lashing rings (LC 5,000 daN) Hfsdpfx Ael Ux Rwoqleg - 1 pair of lashing rings (LC 10,000 daN) - 6 pairs of fold-out lashing rings to the outside (LC 5,000 daN) - 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) - Cut-outs in the outer frame of the loading platform for attaching lashing straps Braking system: - Braking system according to EU regulations with EBS-E (2S2M) Paintwork: - First-class and durable corrosion protection for the standard shot-blasted welded frame, ensured by a two-component (2K) zinc dust primer - High-quality two-component (2K) top coat in single-color Nova Grey - Rear precisely metalized and painted in RAL 9010 (Pure White) - No metallic paint available Landing gear: - JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Steel construction: - Steel structure made of high-strength fine-grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355MPa) - S690QL/S700MC (yield strength 690MPa) Electrical system: - Electrical installation according to EU regulations, 24V LED lighting - 2x 7-pin and 15-pin sockets Axles and tyres: - BPW axles, air suspension, with disc brakes (377 mm), with raise/lower function - Hydro-mechanical forced steering - Axle tools - Twin tyres 235/75 R 17.5 Standard accessories: - Yellow-red air couplings on the galvanized front connection rail - 4 wheel chocks with holders - 2" king pin - Galvanized steel front wall, approx. 1600 mm high - White reflective tape according to EU regulations on the sides, on the extension, and red at the rear - Load platform with heavy-duty hardwood floor - Steering from front and rear via cable - Remote operation via push-button control, with axle steering alignment indicator - Radio remote control for rear steering - 9 pairs of stake pockets for 100 x 50 mm plug-in stakes on the outer frame of the load platform - Galvanized folding supports under the rear bevel of the platform - Movable hook-in rail for aluminium loading ramps at the rear of the vehicle - European reflective panels (red-yellow) at the rear of the trailer - One mud flap at the rear of the trailer - Rear beacon bracket - Warning sign brackets including sockets on the gooseneck and rear plate left/right - INOX toolbox 1500x390x810 mm under platform, right side direction of travel - BEKAMAX (Pico) central lubrication system with NLHI-2 standard grease and removable pump guard - 6 pairs of WADER container locks in the loading platform, for 1x 20ft container, 2x 20ft containers or 1x 40ft container, additional locking position provided in the extension for a 45ft container - 4 pairs of crosswise stake pocket rails in the loading platform for 100 x 50 mm plug-in stakes - Lifting axle on the front axle with TEBS control - depending on current axle load and load status - Speed stickers (80 km/h) on rear and both sides - Four warning signs, extendable by approx. 400 mm, approx. 423 x 423 mm with LED position lights - Bracket for beacon on warning signs - Load pressure gauge for axle load determination incl. load diagram - HRM metalizing (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, metalized with ZINACOR 850 (zinc 85% - alu 15%) and hot-finished at the defined visible areas

Stav: nový, pohotovostná hmotnosť: 11 300 kg, maximálna hmotnosť nákladu: 36 700 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 1 250 mm, zavesenie: vzduch, veľkosť pneumatiky: 385/65 r 22,5, farba: sivo-čierny, Výbava: ABS, Loading platform: Extendable loading platform with pneumatically operated locking mechanism A fixed intermediate table approx. 250 mm wide is mounted on the central beam 8 pairs of lashing rings, foldable outwards (LC 5,000 daN) 3 pairs of lashing rings, foldable outwards (LC 10,000 daN) Cut-outs in the outer frame of the loading platform for attaching lashing straps (LC 2,000 daN) Axles and tyres: BPW axles and suspension, all axles hydro-mechanically forced-steered Disc brakes, technical axle load: 10,000 kg Air suspension with lift and lower valve Axle tools 6-fold tyres, 385/65 R 22.5 Brake system: Brake system according to EU regulations with EBS-E (2S2M) Landing legs: JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Steel structure: Steel structure made of high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system: Electrical system according to EU regulations, lighting 24V ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection strip with sockets 24N, 24S & 15-pin Connection according to ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paintwork: First-class and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer High-quality 2-component (2K) single-colour top coat in novagrey Rear section metallised and painted in RAL 9010 (pure white) No metallic paint possible Accessories included: Mountings for warning plates on the gooseneck and on the rear plate, left and right, each with socket Remote steering operated from the front and rear via cable remote control with push buttons, with axle tracking control Electro-hydraulic unit 4 wheel chocks with holder on the front wall 2" king pin Galvanised steel front wall approx. 2,200 mm high Yellow-red air couplings on the galvanised connection strip at the front White reflective tape according to EU regulations on the sides, on the extension and rear in red European reflector panels (red-yellow) at the rear of the semitrailer One mud flap at the rear of the trailer Manual and description Mounting for a rotating beacon at the rear of the trailer Loading platform with approx. 30 mm thick wooden floor enclosed in omega profiles 10 pairs of stanchion sockets for plug-in stanchions 100 x 50 mm on the outer frame of the loading platform 1 spare wheel holder under the loading platform, right-hand side in direction of travel 6 pairs of WADER container pockets in the loading platform, for 1x 20ft container, 2x 20ft container or 1x 40ft container; for 45ft container, an additional locking position is provided in the extension 5 pairs of stanchion rail cross-members mounted transversely in the loading platform, for plug-in stanchions 100 x 50 mm One galvanised holder transversely under the platform (2,390 x 720 x 400 mm) Access ladder mounted on the right-hand side in direction of travel One HDPE toolbox 1,200x500x480 at the front under the loading platform, left-hand side in direction of travel Lift axle on the front axle with control by TEBS E depending on the current axle load and loading condition Central lubrication system with 2 BEKAMAX (Pico) pumps, with standard grease NLGI-2 and removable guard around the pump Hfedpfxshlz Shj Aqljg Red/white reflective tape in the extension of the loading platform Painted sand coating on the central beam as an anti-slip measure Radio remote control for the steering in additi

Stav: nový, pohotovostná hmotnosť: 9 600 kg, maximálna hmotnosť nákladu: 53 400 kg, celková hmotnosť: 63 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 12 400 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 1 340 mm, zavesenie: vzduch, veľkosť pneumatiky: 385/65 R22.5, farba: sivý, Výbava: ABS, Loading area: - Loading platform with approx. 30 mm thick hardwood floor - 10 pairs of fold-out lashing rings on the outside Landing legs: - JOST landing legs with 2-speed gearbox for 24 t lifting capacity Axles and tyres: - BPW axles, technical capacity 10,000 kg, first axle rigid, all other axles hydro-mechanically forced-steered, mounted on turntables - Air suspension with raise and lower valve - Axle tools - Tyres 385/65 R22.5 Braking system: - WABCO braking system according to EU regulations with EBS-E (4S3M) Steel construction: - Steel structure made from high-tensile fine-grain steels - Steel grades: Hfsdporq Dlfofx Aqlsg S355J2+N/S355MC S690QL/S700MC Electrical system: - Electrical system according to EU regulations, lighting 24 Volt - ASPÖCK UNIBOX on the front connector strip with 24N, 24S & 15-pin sockets - Connections compliant with ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Painting: - First-class and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component zinc dust primer - High-quality 2-component top coat in a single colour, Nova grey - Rear section metallised and painted in RAL 9010 Accessories included: - Loading area with approx. 30 mm thick hardwood floor - 2" king pin - Galvanised steel front wall approx. 1,200 mm high, EN12642-XL - Yellow-red air couplings at the galvanised front connector strip - 4 wheel chocks with holders at the front wall - Storage for 1,000 mm stake pockets in the central beam at the rear - At the gooseneck and rear plate left and right each a holder for warning signs incl. socket - Remote axle steering operation from the front and rear via cable remote control with push buttons and tracking control - Electro-hydraulic power unit - White reflective tape on sides and red at rear according to EU regulations - 12 pairs of stake pockets for 100 x 50 mm stanchions in the external frame of the loading area - European reflector plates at the rear of the trailer - Mount for a rotating beacon at the rear of the trailer - One mudflap at the trailer rear - Manual and documentation on USB stick - BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and detachable cover around the pump TPMS Tyre Pressure Monitoring System: - For correct display, the towing vehicle must be able to transmit and display this data - Lift axle on the front axle with control via TEBS E, dependent on the current axle load and loading status - Radio remote control for axle steering, in addition to cable remote, with indicator lights on the receiver for tracking control - 5 pairs of stake pocket strips, mounted crosswise on the loading area, for 100 x 50 mm stanchions - 80 km/h speed stickers, mounted at the rear and on both sides - Adjustable access ladder mounted left and right in the direction of travel - 2 reversing lights mounted on the rear panel - Load pressure gauge to determine axle loads including load chart - HRM metallisation of the external frame: Complete steel structure shot-blasted, then the defined visible areas are metallised and hot-finished with ZINACOR 850 (zinc 85% - aluminium 15%)

Stav: nový, maximálna hmotnosť nákladu: 30 190 kg, celková hmotnosť: 43 000 kg, konfigurácia náprav: 2 nápravy, Výbava: ABS, You can find our complete range of immediately and short-term available vehicles on our website. Excerpt from the equipment list. Full specification available upon request. Loading platform: - Low bed with externally mounted beams, extendable in SUPER LOW design, approx. 6,850 mm long - Low bed with fixed hardwood floor, approx. 40 mm thick, with mechanical locking - Supply lines are protected within the extendable beams and automatically adjust to the current low bed length - 5 pairs of outward-folding lashing rings (LC 10,000 daN) - 6 pairs of threaded blocks on the inner beam for mounting screw-in RUD rings Gooseneck: - Gooseneck in SNT design for optimum loading length, approx. 3,750 mm long - Gooseneck hydraulically lift/lowerable and removable - Technical fifth-wheel load: 23,000 kg - Suitable for tractor units (4x2, 6x2) Rear chassis: - Rear chassis in short design with closed outer frame and chequer plate cover - Chassis with excavator recess, closed at the rear section for housing air tanks - 2 pairs of outward-folding lashing rings (LC 5,000 daN) - 1 pair of outward-folding lashing rings (LC 10,000 daN) - 1 pair of horizontal lashing rings at front & rear of the chassis (LC 10,000 daN) Axles: - BPW axles with hydro-mechanical forced steering - Technical axle load: 12,000 kg each - Air suspension with lift/lower valve Hfodpfsxarl Nsx Aqleg Tyres: - 245/70 R 17.5 3PMSF tyres, brand of our choice - Load index (146/146F) - TPMS tyre pressure monitoring system (ECE R 141 compliant) - Data transfer to tractor via standardised EBS interface per ISO 11992 - For proper display, the tractor unit must be able to transmit and display these data Brake system: - Brake system compliant with EU regulations with EBS-E (2S2M) Electrical system: - Electrical system per EU regulations, lighting 24 V ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX at the front wiring harness with sockets 24N, 24S & 15 pin according to ISO: 24N ISO-1185, 24S ISO-3731, 15 pin ISO-12098 Steel construction: - Steel structure made of high-strength fine-grained steels - Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: - Entire steel structure automatically shot-blasted after welding - Second blasting with corundum for optimal coating adhesion - Whole vehicle chassis metalized with ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection - Final coat with 2 layers of 2K topcoat, single-colour in RAL 3002 Carmine Red, per RAL system 841GL - Rims in silver - Rear section metalized and painted in RAL 9010 (Pure White) - No metallic finishes possible - Paint structure salt spray-tested per ISO 9227-NSS - Cavities sealed with special wax Includes the following additional equipment: - 2-inch king pin - One galvanized steel front wall, approx. 400 mm high - Remote steering at front and rear via cable remote control with push buttons, incl. single-wheel tracking (without installation in tractor unit) - Hydraulic connections from gooseneck to low bed via multi-coupling instead of screw couplings - Electro-hydraulic power unit - Preparation for mounting screwed container locks for one 20' or one 40' container on the outer beams - No container locks included

Stav: nový, maximálna hmotnosť nákladu: 45 820 kg, celková hmotnosť: 58 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, Celú našu ponuku vozidiel, vrátane okamžite a krátkodobo dostupných vozidiel, nájdete na našej webovej stránke. Výber zo špecifikácie. Kompletnú špecifikáciu poskytneme na požiadanie. Labuťový krk: * Labuťový krk so skosenými rohmi vpredu cca 45° a so zadným skosením cca 750 mm x 10° * 3 páry úväzných krúžkov (LC 5 000 daN) * Podlaha z tvrdého dreva hrúbky cca 30 mm Ložná plocha v vysúvateľnom vyhotovení: * Ložná plocha v vysúvateľnom vyhotovení so zadným skosením cca 1 000 mm x 8° * 5 párov sklápacích úväzných krúžkov smerom von (LC 5 000 daN) * 3 páry sklápacích úväzných krúžkov smerom von (LC 10 000 daN) * 1 pár ležiacich úväzných krúžkov vpredu na ložnej ploche (LC 10 000 daN) * Výrezy v vonkajšom ráme ložnej plochy na upevnenie napínacích pásov (LC 2 000 daN) * Podlaha z tvrdého dreva hrúbky cca 48 mm, nad nápravami podlaha z slzového plechu Nápravy: * BPW nápravy a zavesenie * 1. náprava pevná, ostatné nápravy hydro-mechanicky nútene riadené * Technické zaťaženie nápravy: každá 12 000 kg * Vzduchové odpruženie so zdvíhacím a spúšťacím ventilom * Náradie k nápravám Pneumatiky: * Pneumatiky 245/70 R 17.5 3PMSF, index nosnosti (146/146 F) * Značka podľa nášho výberu * TPMS systém kontroly tlaku v pneumatikách podľa ECE R 141 * Prenos údajov do ťažného vozidla prebieha cez štandardizované EBS rozhranie podľa ISO 11992 * Na správne zobrazenie musí byť ťažné vozidlo schopné tieto údaje prenášať a zobrazovať Oporné nohy: * JOST oporné nohy (mechanické) s 2-rýchlostnou prevodovkou pre cca 24 t zdvíhacej záťaže (cca 50 t testovanej záťaže) Brzdový systém: * Wabco brzdový systém podľa predpisov EÚ s EBS-E (4S3M), bez prepojovacích vedení k ťažnému vozidlu Lak: * Kompletná oceľová konštrukcia po zvarení automaticky otryskaná v zariadení s projektilovým kolesom * Druhé otryskanie korundom pre optimálnu priľnavosť náterového systému * Záverečný náter s 2 vrstvami 2K vrchného laku, jednofarebný podľa RAL 3002 karmínovo červená, podľa systému RAL 841GL * Disky strieborno-sivé * Zadná časť metalizovaná a lakovaná v RAL 9010 (čistá biela) * Nemožno použiť metalický lak * Lakovacia zostava testovaná v soľnej sprejovej komore podľa ISO 9227-NSS * Dutiny uzatvorené špeciálnym voskom Oceľová konštrukcia: * Oceľová konštrukcia z vysokopevnostných jemnozrnných ocelí * Kvality ocele: S355J2+N/S355MC (medza klzu 355 MPa), S690QL/S700MC (medza klzu 690 MPa) Elektrická výbava: Hodpfx Ajxbmpfeqlofg * Elektrická výbava podľa predpisov EÚ * Osvetlenie 24 V ASPÖCK-NORDIK (ASS3) * Všetky LED obrysové svetlá blikajú s ukazovateľom smeru * ASPÖCK-UNIBOX na pripojovacej lište vpredu so zásuvkami 24N, 24S a 15-pól. pripojenie podľa ISO * 24N ISO-1185 24S ISO-3731 15-pól. ISO-12098 Vrátane nasledovných prídavných zariadení: * 2“ kráľovský čap * Pozinkovaná oceľová čelná stena, cca 400 mm vysoká * Na pozinkovanej prednej pripojovacej lište žlto-červené vzduchové spojky * Elektro-hydraulická jednotka * Nútené riadenie zpredu aj zozadu ovládateľné cez káblové diaľkové ovládanie s tlačidlami, s kontrolou smerovania všetkých náprav (bez inštalácie v ťažnom vozidle) * Pozinkované výklopné oporné nohy pod skosením ložnej plochy * 1 pár zapustených úväzných krúžkov pozdĺž centrálneho nosníka vzadu v skosení (LC 10 000 daN) * Na labuťovom krku hliníkové bočné a zadné steny, zasúvateľné, cca 2 440 x 400 mm (D x V) * Zadné pozinkované zasúvateľné zarážky sú odnímateľné (dĺžka nadstavby cca 2 560 mm) * Jeden galvanizovaný box na náradie, integrovaný v skosenom labuťovom krku * 3 páry WADE

Stav: nový, maximálna hmotnosť nákladu: 39 670 kg, celková hmotnosť: 50 960 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, Celý náš aktuální vozový park s okamžitě a krátkodobě dostupnými vozidly najdete na našich webových stránkach. Výňatek z výbavy. Kompletní seznam výbavy na vyžádání. Labutí krk: * Labutí krk s tvrdodřevěnou podlahou cca 30 mm silnou * Labutí krk vzadu v přímém provedení * 3 páry vázacích ok (LC 5 000 daN) Hedpfx Asxarlvjqlefg Nákladová plocha: * Nákladová plocha v provedení s výsuvem * 5 párů výklopných vázacích ok (LC 5 000 daN) * 3 páry výklopných vázacích ok (LC 10 000 daN) * 1 pár vodorovných vázacích ok vpředu v nákladové ploše (LC 10 000 daN) * Výřezy ve vnějším rámu nákladové plochy pro zavěšení upínacích pásů (LC 2 000 daN) * Tvrdodřevěná podlaha cca 48 mm silná, nad nápravami provedení s protiskluzovým plechem Nápravy: * BPW nápravy, dvě nápravy pevné, dvě nápravy s nuceným řízením * Vzduchové odpružení s funkcí zvedání/snížení * Řiditelné nápravy s elektromagnetickou reverzní blokací, aktivace přes zpátečku nebo manuálně * Bubnové brzdy * Nápravařské nářadí Pneumatiky: * 205/65 R 17.5 * Značka dle naší volby * Systém kontroly tlaku v pneumatikách TPMS dle ECE R 141 * Přenos dat do tahače probíhá přes standardizované EBS rozhraní dle ISO 11992 * Pro správné zobrazení musí být tahač schopen tato data přijímat a zobrazovat Brzdová soustava: * Brzdová soustava dle předpisů EU s EBS-E (4S3M) bez propojovacích vedení k tahači Ocelová konstrukce: * Ocelová konstrukce z vysocepevnostních jemnozrnných ocelí * Kvalita oceli: S355J2+N/S355MC (mez kluzu 355 MPa), S690QL/S700MC (mez kluzu 690 MPa) Lakování: * Kompletní ocelová konstrukce po svařování automaticky tryskána kruhovým paprskem * Druhé tryskání korundem pro optimální přilnavost nátěrového systému * Metalizace celého podvozku vozidla HRM ZINACOR 850 (85 % zinek/15 % hliník) pro nejlepší ochranu proti korozi * Vrchní lakování 2 vrstvami dvousložkového laku, jednobarevně v RAL 3002 karmínově červená dle systému RAL 841GL * Ráfky stříbrné * Zadní část vozidla metalizována a lakována v RAL 9010 (čistě bílá) * Metalický lak není možný * Systém nanášení laku testován v solné komoře dle ISO 9227-NSS * Dutiny uzavřeny speciálním voskem Elektrická soustava: * Elektrická soustava dle předpisů EU, osvětlení 24 V ASPÖCK-NORDIK (ASS3) * Všechny LED boční obrysové světla blikají současně s blinkrem * ASPÖCK-UNIBOX na čelní přípojnici s 24N, 24S & 15pól. zásuvkami dle ISO (24N ISO-1185, 24S ISO-3731, 15pól. ISO-12098) Příslušenství v ceně: * 2palcový královský čep * Držák rezervního kola před čelní stěnou * Na pozinkované čelní přípojnici žluté a červené vzduchové spojky * Pozinkované sklápěcí podpěry pod zkosením nákladové plochy * Pozinkovaná ocelová přední stěna (EN12642-XL), výška cca 1 600 mm * Hliníkové bočnice a zadní stěna na labutím krku, zasunovací, cca 2 440 x 400 mm (d x v) * Zadní pozinkované odnímatelné zasunovací sloupky (délka nástavby cca 2 560 mm) * Podpěrný stojan s 1 párem WADER kontejnerových kapes, nosnost cca 20 000 kg * 7 párů WADER kontejnerových kapes pro 1x 20' kontejner v nákladové ploše * 1x 40' kontejner v nákladové ploše, 1x 40' kontejner na labutím krku, 2x 20' kontejnery * 7 párů kapes na sloupky pro zasunovací sloupky 100 x 50 mm ve vnějším rámu nákladové plochy * Jeden pozinkovaný držák napříč pod

Stav: nový, maximálna hmotnosť nákladu: 36 360 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, Celú našu aktuálnu ponuku vozidiel, ktoré sú ihneď alebo v krátkom čase dostupné, nájdete na našej webovej stránke. Hodpfsyhkq Ujx Aqljfg Výňatok zo špecifikácie. Kompletná výbava na požiadanie. Krk labute: * Krk labute so zrezanými rohmi vpredu (cca 45°) a zošikmením vzadu (cca 750 mm x 10°) * 3 páry upevňovacích ôk (LC 5 000 daN) * Podlaha z tvrdého dreva, hrúbka cca 30 mm Ložná plocha: * Teleskopická ložná plocha so zošikmením vzadu (cca 1 000 mm x 8°) * 1 pár pevne zabudovaných kolísk na kolesá pred nápravami, cca 2 850 x 970 x 400 mm (DxŠxV) * Kolísky na kolesá s lezeckými lištami (cca 15 x 15 mm) a rozšírením v spodnej časti * Medzi prvou a druhou nápravou jeden pár pevne zabudovaných kolísk na kolesá, cca 1 610 x 970 x 400 mm (DxŠxV) * Vrátane trojdielnych odnímateľných pozinkovaných krytov nad kolískami na kolesá (šírka cca 670 mm) – max. bodové zaťaženie 5 t/kus * Prehlbenie vo zošikmení aj na ložnej ploche na usadenie ramena lyžice bagra (cca 2 900 x 750 x 210/290 mm DxŠxV) * 1 pár ležatých upevňovacích ôk vpredu na ložnej ploche (LC 10 000 daN) * 5 párov výklopných upevňovacích ôk (LC 5 000 daN) * 2 páry výklopných upevňovacích ôk (LC 10 000 daN) * 2 páry upevňovacích ôk v kolíske na násadu bagra (LC 5 000 daN) * Výrezy v vonkajšom ráme ložnej plochy na upevňovacie pásy (LC 2 000 daN) Dvojdielne oceľové rampy: * 1 pár pozinkovaných dvojdielnych oceľových rámp, cca 2 750 + 1 400 x 800 mm, s cca 48 mm silnou podlahou z tvrdého dreva * Rampy s hydraulicky výklopnými časťami a hydraulickým zdvíhacím mechanizmom, hydraulicky posuvné * Maximálne zaťaženie na pár: 40 000 kg Opory návesu: JOST opory návesu (mechanické) s dvojstupňovou prevodovkou pre nosnosť cca 24 t (skúšobné zaťaženie cca 50 t) Nápravy: * BPW nápravy a zavesenie, 2 pevné nápravy, 1 riadená doťahovaná náprava * Technická nosnosť na nápravu: každá 12 000 kg * Elektromagnetický spätný zámok aktivovateľný spiatočkou a manuálne * Vzduchové odpruženie so zdvíhacím a spúšťacím ventilom Obutie: * Pneumatiky 235/75 R 17.5 3PMSF – značka podľa nášho výberu TPMS: * Systém kontroly tlaku v pneumatikách podľa ECE R 141 Brzdový systém: * WABCO brzdový systém v súlade s európskymi predpismi s EBS-E (2S2M) Lak: * HRM metalizácia celého podvozku vozidla so ZINACOR 850 (85 % zinok/15 % hliník) pre najlepšiu antikoróznu ochranu * Konečná lakovaná úprava dvoma vrstvami 2K vrchného laku, jednobarevná podľa RAL 3002 karmínová červená, podľa systému RAL 841GL * Disky kolies v striebornej šedej Vrátane nasledovnej doplnkovej výbavy: * 2“ koníkový čap * Pozinkovaná oceľová predná stena, výška cca 400 mm * 3 páry zapustených upevňovacích ôk pozdĺž centrálneho nosníka (LC 5 000 daN) * Elektrohydraulická jednotka v zadnej časti, pod ložnou plochou * Na krku labute hliníkové bočné steny a zadná stena, nasadzovacie, cca 2 440 x 400 mm (DxV). Zadné pozinkované nasadzovacie stĺpiky sú odnímateľné (dĺžka nadstavby cca 2 560 mm) * Jeden galvanizovaný náradový box integrovaný do šikmého hrdla labute * 2 páry kontajnerových vreciek WADER na ložnej ploche pre 20‘ alebo 30‘ kontajner * 3 páry vreciek na stĺpiky približne 100 x 50 mm vo vonkajšom ráme ložnej plochy * 3 páry prídavných, odnímateľných, pozinkovaných krytov nad kolískou na kolesá – max. bodové zaťaženie 3,5 t/kus * Jeden odnímateľný pozinkovaný medzistôl s 1 párom vreciek WADER na kontajnery * 1 ďalší zavesiteľný medzistôl, šírka cca 300 mm * Medzistôl s rozšírenou ložnou plochou pre premostovacie elementy * Uchytenie pre...

Stav: nový, maximálna hmotnosť nákladu: 37 075 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, Celý náš aktuálny vozový park, vrátane vozidiel dostupných ihneď alebo v krátkom termíne, nájdete na našej webovej stránke. Výňatok z výbavy. Kompletný zoznam výbavy na vyžiadanie. Labutie hrdlo: * Labutie hrdlo so skosenými rohmi vpredu cca 45° a so zadným skosením cca 750 mm x 10° * 3 páry upevňovacích krúžkov (LC 5 000 daN) * Tvrdé drevené obloženie s hrúbkou cca 30 mm Hsdpoyhkrrofx Aqlsfg Nakladacia plocha: * Nakladacia plocha za labutím hrdlom hydraulicky zdvíhateľná a spustiteľná, dĺžka cca 2 800 mm, so zadným skosením cca 1 000 mm x 8° * 6 párov výklopných upevňovacích krúžkov smerom von (LC 5 000 daN) * 2 páry výklopných upevňovacích krúžkov smerom von (LC 10 000 daN) * 1 pár výklopných upevňovacích krúžkov smerom dovnútra na centrálnom nosníku vpredu (LC 10 000 daN) * Výrezy vo vonkajšom ráme plošiny na zavesenie upínacích pásov (LC 2 000 daN) * Roštový povrch C40/4 (bodové zaťaženie cca 2,3 t na ploche cca 20 x 20 cm), nad nápravami profilovaný plech Dvojdielne oceľové rampy: * Jeden pár žiarovo zinkovaných dvojdielnych oceľových rámp, cca 2 750 + 1 400 x 800 mm, s roštovým povrchom C40/4 (bodové zaťaženie cca 2,2 t na ploche cca 20 x 20 cm) * Rampy s hydraulicky výklopnými a sklopnými časťami * Hydraulické zdvíhacie zariadenie, hydraulicky posuvné * Maximálne zaťaženie na pár: cca 40 000 kg Nápravové opory: * Mechanické nápravové opory JOST s dvojrýchlostnou prevodovkou, zdvihová kapacita cca 24 t (skúšobné zaťaženie cca 50 t) Nápravy: * BPW nápravy a odpruženie, 2 tuhé nápravy, 1 riadená vlečená náprava * Technické zaťaženie nápravy: každá 12 000 kg * Elektromagnetická blokácia spätného chodu aktivovaná spätným zaradením a manuálne * Vzduchové odpruženie s ventilom na zdvíhanie a spúšťanie Brzdový systém: * Brzdový systém WABCO v súlade s predpismi EÚ s EBS-E (2S2M) Pneumatiky: * Pneumatiky 235/75 R 17.5 3PMSF – značka podľa nášho výberu TPMS: * Systém monitorovania tlaku v pneumatikách TPMS podľa ECE R141 Lakovanie: * Metalizácia celého rámu HRM systémom ZINACOR 850 (85 % zinok/15 % hliník) pre najlepšiu ochranu proti korózii * Vrchné lakovanie – 2 vrstvy dvojzložkového laku, jednoliato v odtieni RAL 3002 karmínovo červená podľa RAL systému 841GL * Disky v striebornej šedej Príslušenstvo v cene: * 2" kráľovský čap * Galvanizovaná oceľová predná stena, výška cca 400 mm * Roštový povrch v skosení labutieho hrdla C30/3 (bodové zaťaženie cca 2 t na ploche cca 20 x 20 cm) * Roštový povrch v skosení plošiny C40/4 (bodové zaťaženie cca 3,4 t na ploche cca 20 x 20 cm) * Elektrohydraulická jednotka pod plošinou vzadu * Hliníkové bočné a zadné steny na labutiom hrdle – zasúvateľné, cca 2 440 x 400 mm (d x v); zadné pozinkované vkladacie stĺpiky odnímateľné, (dĺžka nadstavby cca 2 560 mm) * Elektrický navijak s diaľkovým ovládaním, zdvihová kapacita cca 5 400 kg, vrátane oceľového lana hrúbky cca 9,5 mm, dĺžky cca 24 m, s kladkou na navíjanie * Skrutkovaný 5 t kruh na zachytenie navijakového lana na labutom hrdle bez kladky * Galvanizovaný box na náradie integrovaný v skosenom labutom hrdle s otvorom pre navijak * Roštový povrch na labutiom hrdle C30/3 (bodové zaťaženie cca 2 t na ploche cca 20 x 20 cm) * 7 párov otvorov pre vkladacie stĺpiky cca 100 x 50 mm vo vonkajšom ráme plošiny * Predná zdvíhacia náprava s ovládaním cez TEBS E podľa aktuálneho zaťaženia nápravy a stavu naloženia * 7 párov zapustených upevňovacích krúžkov pozdĺž centrálného nosníka (LC 5 000 daN): 2 páry v zdvíhacej časti, 5 párov v zadnej časti plošiny

Stav: nový, maximálna hmotnosť nákladu: 37 075 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, Celý náš vozový park okamžite a krátkodobo dostupných vozidiel nájdete na našej webovej stránke. Výber z výbavy. Kompletná špecifikácia na požiadanie. Laboltný krk (husí krk): * Laboltný krk s prednými skosenými rohmi cca 45° a zadným skosením cca 750 mm x 10° * 3 páry upevňovacích krúžkov (LC 5 000 daN). Podlaha z tvrdého dreva hrúbky cca 30 mm Hfsdpfxeyhkqzo Aqlog Nakladacia plocha: * Nakladacia plocha za laboltným krkom hydraulicky zdvíhateľná a spúšťateľná, dĺžka cca 2 800 mm, so zadným skosením cca 1 000 mm x 8° * 6 párov von vyklápateľných upevňovacích krúžkov (LC 5 000 daN) * 2 páry von vyklápateľných upevňovacích krúžkov (LC 10 000 daN) * 1 pár dovnútra vyklápateľných upevňovacích krúžkov v centrálnom nosníku vpredu (LC 10 000 daN) * Výrezy vo vonkajšom ráme nakladacej plochy na zavesenie upínacích pásov (LC 2 000 daN) * Podlaha z roštovej mreže C40/4 (bodové zaťaženie cca 2,3 t na ploche cca 20 x 20 cm), nad nápravami podlaha z rifľovaného plechu Dvojdielne oceľové rampy: * Jeden pár žiarovo pozinkovaných dvojdielnych oceľových rámp, cca 2 750 + 1 400 x 800 mm, s roštovou podlahou C40/4 (bodové zaťaženie cca 2,2 t na ploche cca 20 x 20 cm) * Rampa s hydraulicky vyklápateľnými časťami. Hydraulické zdvíhanie, hydraulicky pojazdná * Maximálne zaťaženie na pár: cca 40 000 kg Oporné nohy: * JOST mechanické oporné nohy s dvojrýchlostnou prevodovkou pre cca 24 t zdvíhacej kapacity (cca 50 t testovacej záťaže) Nápravy: * BPW nápravy a zavesenie, 2 nápravy pevné, 1 náprava vlečená * Technické zaťaženie nápravy: po 12 000 kg * Elektromagnetické spätné blokovanie cez spiatočku a manuálne ovládanie * Vzduchové odpruženie so zdvíhacím/spúšťacím ventilom Brzdový systém: * WABCO brzdový systém podľa predpisov EÚ s EBS-E (2S2M) Obutie: Pneumatiky 235/75 R 17.5 3PMSF – značka podľa vlastného výberu TPMS: * Systém kontroly tlaku pneumatík podľa normy ECE R 141 Lakovanie: * HRM žiarové metalizovanie celého podvozku vozidla ZINACOR 850 (85% zinok/15% hliník) pre najvyššiu úroveň ochrany proti korózii * Vrchný lak v 2 vrstvách dvojzložkového laku, jednoliata farba RAL 3002 karmínovo červená podľa systému RAL 841GL * Disky v striebornej sivej Príslušenstvo v cene: * 2“ kráľovský čap * Jedna pozinkovaná oceľová predná stena, cca 400 mm vysoká * Roštová podlaha v skosení laboltného krku C30/3 (bodové zaťaženie cca 2 t na ploche cca 20 x 20 cm) * Roštová podlaha v skosení nakladacej plochy C40/4 (bodové zaťaženie cca 3,4 t na ploche cca 20 x 20 cm) * Na rifľovanom plechu, nad kráľovským čapom a nakladacou plochou je nanesená vrstva piesku ako ochrana proti pošmyknutiu * Elektrohydraulická jednotka pod nakladacou plochou vzadu * Na laboltnom krku demontovateľné hliníkové bočné a zadné steny, cca 2 440 x 400 mm (D x V). Zadné pozinkované nasúvacie kolíky sú odnímateľné. (Dĺžka nadstavby cca 2 560 mm) * Jedno elektrické lanové navijaky s diaľkovým ovládaním, cca 5 400 kg ťažné sily, vrátane cca 9,5 mm hrubého oceľového lana, cca 24 m dlhého, s vodiacou kladkou * Prišroubovaný cca 5 t kruh pre vedenie lana navijaka na krku bez kladky * Jeden galvanizovaný box na náradie, integrovaný do skoseného laboltného krku s otvorom na navijak * Roštová podlaha na laboltnom krku C30/3 (bodové zaťaženie cca 2 t na ploche cca 20 x 20 cm) * 7 párov vreciek na nasúvacie kolíky cca 100 x 50 mm vo vonkajšom ráme nakladacej plochy * Zdvihacia náprava na prednej náprave, riadená systémom TEBS E v závislosti od aktuálneho zaťaženia nápravy a nakladacieho stavu * 7 párov upevňovacích...

Stav: nový, pohotovostná hmotnosť: 6 350 kg, maximálna hmotnosť nákladu: 38 650 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 540 mm, zavesenie: vzduch, veľkosť pneumatiky: 385/65 R22,5, Výbava: ABS, Loading Area: - 2 pairs of folding lashing rings on the outside (LC 5,000 daN) - 24 pairs of cut-outs in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN) Landing Legs: - JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: - BPW axles, air-suspended, with disc brakes (430 mm), equipped with lifting/lowering function - Tyres: 385/65 R 22.5 Brake System: - WABCO brake system according to EU regulations with EBS-E (2S2M) Paintwork: - First-class and long-lasting corrosion protection of the standard shot-blasted welded frame is ensured by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) single-colour top coat in MB 7350 Nova Grey - Rear section metallised and painted in RAL 9010 (Pure White) - Metallic paint finish not possible Steel Construction: - Steel construction made of high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (Yield strength 355MPa) - S690QL/S700MC (Yield strength 690MPa) Electrical System: - Electrical system according to EU regulations - 24 Volt lighting - ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front connection rail with sockets 24N, 24S & 15-pin - Connection in accordance with ISO. - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Hsdpfx Aeiu Etkjqljfg Accessories Included: - Yellow-red air couplings mounted on the galvanised connection rail at the front - 4 wheel chocks with holders - 2" king pin - Galvanised steel front wall approx. 1,600 mm high, EN12642-XL - White reflective tape according to EU regulations on the sides and red on the rear of the semi-trailer - European reflective panels (red-yellow) on the rear of the trailer - Loading platform with approx. 30 mm thick hardwood floor set in omega profiles - 10 pairs of stake pockets for plug-in stanchions 100 x 50 mm on the outer frame of the loading area - 3 pairs of cross-rails for stake pockets for plug-in stanchions 100 x 50 mm, mounted transversely on the loading deck - Storage tray for 1,000 mm plug-in stanchions, at rear in the central beam - 1 spare wheel holder under the loading platform on the right-hand side (in direction of travel) - 1 mudflap at the rear of the trailer - Manual and documentation on USB stick - 1 bracket for a rotating beacon at the rear of the trailer - On the gooseneck and rear panel, left and right, a bracket for warning signs including socket - 6 pairs of WADER container locks on the loading platform for 1x 20ft, 2x 20ft, or 1x 40ft container, flush with rear - 80 km/h speed stickers at the rear and on both sides - Four warning boards, extendable by approx. 400 mm, approx. 423 x 423 mm, with an LED position light - Load pressure gauge for axle load determination including load diagram - HRM metallisation (High Resistance Metallisation) of the outer frame - Complete steel construction shot-blasted, followed by metallisation with ZINACOR 850 (Zinc 85% - Alu 15%) on the defined visible surfaces

Stav: nový, pohotovostná hmotnosť: 8 300 kg, maximálna hmotnosť nákladu: 36 700 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 1 080 mm, zavesenie: vzduch, veľkosť pneumatiky: 385/65 R 22.5, farba: sivý, Výbava: ABS, zdvíhacie čelo, Loading Platform: Extending loading platform design with pneumatically operated locking mechanism. Cut-outs in the outer frame of the loading platform for securing lashing straps. Landing Legs: JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity. Axles and Tyres: BPW air suspension axles with disc brakes (430 mm), equipped with lift/lower function. Trailing steering axle with electromagnetically activated reverse lockout, switchable via reverse gear or manually. Axle toolbox. Tyre size 385/65 R 22.5. Brake System: WABCO braking system compliant with EU regulations, fitted with EBS-E. Paintwork: Premium and durable corrosion protection of the standard shot-blasted welded frame by means of 2-component (2K) zinc dust primer. High-quality single-tone 2-component top coat in MB 7350 Novagrau. Rear section metallised and painted in RAL 9010. Metallic paint not possible. Steel Construction: Steel structure made from high-tensile fine-grain steels. Steel Grades: Hfodjikyh Hopfx Aqlog S355J2+N/S355MC S690QL/S700MC Electrical System: Electrical installation according to EU regulations. Lighting: 24 Volt ASPÖCK-NORDIK. ASPÖCK-UNIBOX on the front connection strip with 24N, 24S, and 15-pin sockets. Connections in accordance with ISO standards. Accessories Included: Galvanised air coupling connectors (yellow-red) on the front connection strip. Galvanised steel front wall, approx. 1,600 mm high, EN12642-XL. 4 wheel chocks with bracket. White reflective tape according to EU regulations at the sides, extension, and red at the rear. European reflective boards at the rear of the trailer. Loading platform with approx. 30 mm thick hardwood floor, enclosed in Omega profiles. 10 pairs of stake pockets for 100 x 50 mm square stakes in the outer frame. 1 spare wheel holder below the loading platform, right side when facing the direction of travel. Manual and documentation. Bracket for rotating beacon at the rear of the trailer. On the gooseneck and on the rear apron, left and right, each with bracket for warning signs including socket. Anti-slip sand coating painted onto the central beam. 6 pairs of WADER container pockets in the loading platform for 1x 20ft container, 2x 20ft containers, or 1x 40ft container. For an extended 45ft container, an additional locking position is provided. 4 pairs of cross stake pocket rails, mounted transversely on the loading platform for 100 x 50 mm plug-in stakes. 1 galvanised bracket mounted transversely under the loading platform (2,390 x 720 x 400 mm). Access ladder mounted on the right side in the direction of travel. Lift axle on the front axle, controlled by TEBS E, depending on current axle load and loading status. Load gauge for axle load assessment, including load diagram. HRM metallisation of the outer frame: complete steel structure shot-blasted, followed by hot-finish metallisation of the defined visible surfaces with ZINACOR 850.

Stav: nový, maximálna hmotnosť nákladu: 36 020 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 540 mm, zavesenie: vzduch, veľkosť pneumatiky: 435/50 R 19.5, farba: sivý, Výbava: ABS, Loading Platform: - Loading platform with extendable design featuring pneumatically operated locking system - 2 pairs of lashing rings (LC 5,000 daN) - 1 pair of lashing rings (LC 10,000 daN) - 6 pairs of outward-folding lashing rings (LC 5,000 daN) - 2 pairs of outward-folding lashing rings (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for attaching tensioning straps Axles and Tyres: - BPW axles, air-suspended, with disc brakes (377 mm), equipped with lifting/lowering function - Self-steering axles with electromagnetic reverse lock, activated via reverse gear or manually - Axle tools - Tyres 435/50 R 19.5 Brake System: - Brake system in accordance with EU regulations with EBS-E (2S2M) Paintwork: - Premium, long-lasting corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer - High-quality single-tone 2-component (2K) topcoat in Novagrau - Rear section metallized and painted in RAL 9010 (Pure White) - Metallic paint finish not possible Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Steel Construction: - Steel construction made from high-tensile fine-grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical System: - Electrical system compliant with EU regulations, lighting 24 Volt ASPÖCK-NORDICK (ASS3) - ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets - Connection as per ISO - 24N ISO-1185 - 24S ISO-3731 Hsdpfx Aqji Dwlwelsfg - 15-pin ISO-12098 Included Accessories: - Yellow-red air couplings on the galvanized front connection bar - 2 wheel chocks with holder - 2" kingpin - A galvanized steel front wall, approx. 1,600 mm high - Yellow reflector tape in accordance with EU regulations on the sides, extension section, and rear of the trailer - European reflector plates (Red-Yellow) at the rear of the trailer - Loading platform with approx. 38 mm thick hardwood flooring - 10 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the platform - 1 spare wheel holder under the loading platform on the right-hand side in the direction of travel - Manual and description on USB stick - 1 mudflap at the rear of the trailer - 1 bracket for a beacon at the rear of the trailer - On the gooseneck and the rear plate, left and right, each with bracket for warning signs including socket - 1 INOX toolbox mounted crosswise under the platform (1,000 x 400 x 2,500mm) - 6 pairs of WADER container pockets in the platform, for 1x 20ft container, 2x 20ft containers or 1x 40ft container; an additional locking point is provided in the extension section for a 45ft container - 3 pairs of stake pocket strips, mounted transversely in the platform, for plug-in stakes 100 x 50 mm - 60 km/h speed sticker at the rear - 2 reversing spotlights mounted on the rear plate - Four warning signs extendable by approx. 400 mm (approx. 423 x 423 mm) each with a position lamp - Bracket for beacon on the warning signs - HRM metallization (High Resistance Metallization) of the outer frame - Complete steel construction shot-blasted, then all defined visible surfaces metallized and hot-finished with ZINACOR 850 (85% zinc – 15% aluminium)

Stav: nový, pohotovostná hmotnosť: 9 300 kg, maximálna hmotnosť nákladu: 38 700 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 1 200 mm, zavesenie: vzduch, veľkosť pneumatiky: 385/65 R 22,5, farba: sivo-čierny, Výbava: ABS, Ložná plocha: • Výsuvná ložná plocha s pneumaticky ovládaným uzávěrem Hfedpfxsiu Etrs Aqleg • Ložná plocha s cca 30 mm silnou podlahou z dřevěného masivu • 7 párů vyklápěcích vázacích ok směrem ven (LC 5 000 daN) • 3 páry vyklápěcích vázacích ok směrem ven (LC 10 000 daN) • Výřezy ve vnějším rámu ložné plochy pro zavěšení upínacích pásů (LC 2 000 daN) Nápravy a pneumatika: • Nápravy BPW a odpružení, všechny nápravy hydro-mechanicky nuceně řízené • Se kotoučovými brzdami • Technické zatížení nápravy: 10 000 kg • Vzduchové odpružení s ventilem pro zvedání a spouštění • Nářadí pro nápravy • Pneumatiky: 385/65 R 22,5 • Systém kontroly tlaku v pneumatikách TPMS dle ECE R 141 Brzdový systém: • Brzdový systém WABCO dle předpisů EU s EBS-E (2S2M) Elektrické zařízení: • Elektrická instalace dle předpisů EU, osvětlení 24 V ASPÖCK-NORDIK (ASS3) • ASPÖCK-UNIBOX na připojovací liště vpředu se zásuvkami 24N, 24S & 15-pin • Připojení dle ISO • 24N ISO-1185 • 24S ISO-3731 • 15-pin ISO-12098 Příslušenství v ceně: • Řízení zadní nápravy zepředu a zezadu pomocí kabelového dálkového ovládání s tlačítky, s kontrolou jedné stopy náprav • 4x zajišťovací klíny s držákem na čelní stěně • 2" královský čep • 1x pozinkovaná čelní stěna z oceli, cca 1 600 mm vysoká • Na pozinkované připojovací liště vpředu žluto-červené vzduchové spojky • Bílé reflektorové pásky dle EU na bocích, výsuvu a vzadu na návěsu v červené barvě • Evropské reflektorové štítky (červeno-žluté) vzadu na návěsu • 1x zástěrka vzadu na návěsu • Návod k obsluze a popis • Držák pro výstražné světlo vzadu na návěsu • Ložná plocha s cca 30 mm silnou dřevěnou podlahou zakrytá Omega-profily • 10 párů kapes na sloupky pro zasouvací sloupky 100 x 50 mm ve vnějším rámu ložné plochy • 1x držák rezervního kola pod ložnou plochou vpravo ve směru jízdy • Elektrohydraulická jednotka • Na labutím krku a zadní části vlevo i vpravo držák výstražných štítů včetně zásuvky • Na centrálním nosníku lakovaná vrstva písku jako ochrana proti smyku • 6 párů kontejnerových kapes WADER v ložné ploše, pro 1x 20ft, 2x 20ft nebo 1x 40ft kontejner, u výsuvu další uzamykací bod pro 45ft kontejner • 4 páry příčných kapes pro sloupky 100 x 50 mm v ložné ploše • Montovaná nástupní žebřík vpravo ve směru jízdy • 1x box na nářadí z HDPE cca 1 200 x 500 x 480 mm vpředu pod ložnou plochou vlevo ve směru jízdy • Centrální mazací zařízení BEKAMAX (Pico) s odnímatelným krytem čerpadla • Zvedací náprava na přední nápravě s ovládáním přes TEBS E v závislosti na aktuálním zatížení nápravy a stavu naložení • Bezdrátové dálkové ovládání pro řízení náprav navíc ke kabelovému ovládání, s kontrolkami na přijímači pro kontrolu jedné stopy • Čtyři výsuvné výstražné tabule cca 400 mm, cca 423 x 423 mm s pozičním světlometem • Na výstražných tabulích držák pro výstražné světlo • Nálepky s omezením rychlosti 80 km/h vzadu a na obou stranách • Manometr pro měření zatížení náprav včetně zatěžovacího diagramu • Metalizace HRM (High Resistance Metallisation) vnějšího rámu • Celá ocelová konstrukce tryskána, poté definované viditelné plochy metalizované a žárově upraveny ZINACOR 850 (zinek 85 % - hliník 15 %)

Stav: nový, maximálna hmotnosť nákladu: 38 800 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5 3PMSF, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck with chamfered front corners at 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable loading platform: - Extendable loading platform with rear chamfer approx. 1,000 mm x 8° - 6 pairs of outward-folding lashing rings (LC 5,000 daN) - 3 pairs of outward-folding lashing rings (LC 10,000 daN) - 1 pair of flat-mounted lashing rings at the front of the loading area (LC 10,000 daN) - Cut-outs in the outer frame of the loading platform for securing straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, over the axles with anti-slip chequer plate Axles and tires: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lowering valve - Axle tools - 235/75 R 17.5 3PMSF Brake system: - WABCO brake system according to EU regulations with EBS-E (2S2M) Landing legs: Hjdpfjuqlmnex Aqljfg - JOST landing legs (mechanical) with 2-speed gearbox, 24t lifting capacity (50t test load) Included accessories: - One spare wheel with holder in front of the bulkhead - 2-inch king pin - Galvanized steel bulkhead, approx. 400 mm high - Yellow and red air couplings on the galvanized front connector strip - 4 wheel chocks with holders at the bulkhead - Mount for rotating beacon at the rear of the trailer - Receptacle at the rear of the gooseneck for ALU approach ramps - Galvanized folding supports under the chamfer of the loading platform - Cover plates for bridging the gap between ramps and platform - White reflective tape according to EU regulations on sides, extension, and red at the rear - Electro-hydraulic unit positioned at the rear, under the platform - On the gooseneck and ramps, left and right, mounts for warning signs including power socket - Control valves for the ramps installed on the right side of the trailer - One mud flap at the rear of the trailer - User manual and documentation on USB stick - ALU side walls and rear wall approx. 2,440 x 400 mm on the gooseneck - The rear, galvanized plug-in stanchions are removable (structure length approx. 2,560 mm) - Four extendable warning signs approx. 423 x 423 mm with position light, extendable by approx. 400 mm - 3 pairs of WADER container pockets in the platform suitable for a 20ft, 30ft, or 40ft container - 6 pairs of 100x50 mm stanchion pockets in the external frame of the loading platform - Galvanized side extensions, extendable by approx. 230 mm per side - 20 x 20 mm square lashing rails every 200 mm on the external frame of the platform's chamfer - Anti-slip sand coating, painted on chequer plates above the king pin and on the loading platform - Mount for rotating beacon on warning signs - European reflective boards (red-yellow) at the rear of the trailer - 80 km/h speed stickers at the rear and both sides - Load manometer for axle load measurement including load diagram - HRM metallization (High Resistance Metallisation) of the external frame - Complete steel structure shot-blasted, then all defined visible surfaces hot-metal sprayed with ZINACOR 850 (zinc 85% - aluminum 15%)

Stav: nový, pohotovostná hmotnosť: 10 600 kg, maximálna hmotnosť nákladu: 39 400 kg, celková hmotnosť: 50 960 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 760 mm, zavesenie: vzduch, veľkosť pneumatiky: 205/65 R17.5, farba: sivý, prevádzková hmotnosť: 10 600 kg, Výbava: ABS, Gooseneck: - Gooseneck with 30 mm hardwood floor - Gooseneck in straight design at the rear - 3 pairs of lashing rings (LC 5,000 daN) Extendable loading area: - Loading area in extendable version - 5 pairs of lashing rings foldable outwards - 3 pairs of lashing rings foldable outwards - 1 pair of lashing rings laid flat at the front of the loading area - Cut-outs in the outer frame of the loading area for attaching tension belts - Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering Landing legs: - JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and tyres: - BPW axles, two rigid, two trailing steering axles - Air suspension, with drum brakes, with lifting/lowering function - The trailing steering axles with electro-magnetic reversing lock, can be activated either via reverse gear or manually - Axle tools - Tyres 205/65 R17.5 Brake system: - Brake system in accordance with EU regulations with EBS-E (4S3M) Steel construction: - Steel construction made of high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system in accordance with EU regulations, 24-volt lighting, ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets - Connections according to ISO: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Paintwork: - First-class and long-lasting corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) top coat, single-colour in Novagrau - Rear section metalized and painted in RAL 9010 (pure white) Included accessories: - One spare wheel with holder in front of the front wall - 2" kingpin - Galvanized steel front wall approximately 400 mm high - Yellow-red air couplings on the galvanized connection bar at the front - 4 wheel chocks with holders on the front wall - Galvanized folding supports under the sloped loading area - Bracket for a revolving beacon at the rear of the trailer - Galvanized, extendable width approx. 230 mm per side - White reflective tape to EU regulations on the side, at the extension, and red at the rear - At the gooseneck and on the rear plate, left and right, one bracket for warning signs each, including socket - European reflective warning plates (red-yellow) at the rear of the trailer - TPMS tyre pressure monitoring system according to ECE R 141 - On the gooseneck, plug-in aluminium side and rear panels approx. 2,440 x 400 mm - The rear, galvanized plug-in stakes are removable, length of the structure approx. 2,560 mm - 7 pairs of WADER container locks - 1x 20ft container on the loading area; 1x 40ft container on the loading area; 1x 40ft container above the gooseneck; 2x 20ft containers - 7 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area - Lift axle at the front axle controlled by TEBS E, depending on current axle load and load condition - Movable hanging bar for aluminium approach ramps at the rear of the vehicle Hfedjt Ag Uwopfx Aqljg - On checker plates on the gooseneck and loading area, a painted-in sand layer as anti-slip protection - Four warning signs each extendable by approx. 400 mm, size approx. 423 x 423 mm, with position light - On warning signs, bracket for rotating beacon - 80 km/h speed stickers on the rear and both sides - Load manometer for determining axle l

Stav: nový, pohotovostná hmotnosť: 7 900 kg, maximálna hmotnosť nákladu: 41 600 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, prevádzková hmotnosť: 7 900 kg, Výbava: ABS, Gooseneck: - Gooseneck with rear taper approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Loading Platform: - Loading platform with rear taper approx. 1,000 mm x 8° - Recess in the sloped section and extending into the loading platform for the excavator bucket stick, approx. 2,900 x 750 x 210/290 mm - Cut-outs in the outer frame of the loading platform for attaching tensioning straps - Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and Tyres: - BPW axles and suspension, 2 fixed axles, 1 trailing-steer axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated by reverse gear and manually - Air suspension with lift and lower valve - TPMS tyre pressure monitoring system according to ECE R 141 - Tyres 235/75 R 17.5 Paintwork: - Complete steel structure automatically shot-blasted after welding with turbine blasting unit - Second blast treatment with corundum for optimal adhesion of the coating system - Final coating with 2 coats of 2K topcoat, single colour in RAL MB 7350 Novagrau - Rims painted silver - Rear section metallised and painted in RAL 9010 (Pure White) - Cavities sealed with special wax Electrical System: - Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX on the front connector strip with sockets: 2x 7-pin & 1x 15-pin Included Accessories: - Extensive lashing positions - 2" king pin - One galvanised steel front wall approx. 400 mm high - Yellow-red air couplings on the galvanised front connector strip - 4 wheel chocks with holder on the front wall - Mounting at the rear of the gooseneck for ALU loading ramps - Galvanised folding supports under the sloped rear section of the loading platform - A holder for a beacon at the rear of the trailer - Galvanised, extendable side extensions approx. 230 mm each side - White reflective tape on the sides and red on the rear in accordance with EU regulations - At the gooseneck and rear plate, left and right, each with a holder for warning plates including socket - On the gooseneck, plug-in ALU side and rear boards approx. 2,440 x 400 mm - The rear, galvanised stakes are removable - 2 pairs of WADER container locks in the loading platform for a 20 ft container - 6 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the loading platform - Sliding mounting rail for ALU loading ramps at the rear of the vehicle - 20 x 20 mm square climbing strips every 200 mm on the outer frame of the sloped section of the loading platform - Painted-on sand coating as anti-slip protection on the checker plates of the gooseneck and the loading platform - Four warning plates extendable by approx. 400 mm, approx. 423 x 423 mm each, with position light Hfjdpfx Asunrapjqljg - Holder for beacon on the warning plates - 80 km/h speed stickers on the rear and on both sides - European reflective panels (red-yellow) at the rear of the trailer - Manual and documentation on USB stick - HRM metallisation (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then the defined visible areas are hot-finished with ZINACOR 850 metallisation (zinc 85% - aluminium 15%)