3 Achs 3 Achs Jumbo- Pritschenanhänger Mit Steckrungen kúpiť použité (42 578)
Zoradiť výsledky
- Najnižšia cena Najvyššia cena
- Najnovšie inzeráty Najstaršie inzeráty
- Najkratšia vzdialenosť Najväčšia vzdialenosť
- Najnovší rok výroby Najstarší rok výroby
- Najnovšia aktualizácia Najstaršia aktualizácia
- Výrobcovia od A po Z Výrobca od Z po A
- Relevantnosť
- Najnižšia cena
- Cena
- Najvyššia cena
- Cena
- Najnovšie inzeráty
- Dátum pridania
- Najstaršie inzeráty
- Dátum pridania
- Najkratšia vzdialenosť
- Vzdialenosť
- Najväčšia vzdialenosť
- Vzdialenosť
- Najnovší rok výroby
- Rok výroby
- Najstarší rok výroby
- Rok výroby
- Najnovšia aktualizácia
- Aktualizácia
- Najstaršia aktualizácia
- Aktualizácia
- Výrobcovia od A po Z
- Výrobca
- Výrobca od Z po A
- Výrobca
- Označenie od A po Z
- Označenie
- Označenie od Z po A
- Označenie
- Model od A po Z
- Model
- Model od Z do A
- Model
- Najnižšia referencia
- referencia
- Najvyššia referencia
- referencia
- Najkratšia doba prevádzky
- Prevádzková doba
- Najdlhšia doba prevádzky
- Prevádzková doba
- relevantnosť
- relevantnosť
Malý inzerát
Petershagen
867 km
Nízkopodlažný náves
WIESE 3-Achs-Tieflader mit Rampen und Radmulden
Zavolať
Stav: nový, maximálna hmotnosť nákladu: 26 500 kg, celková hmotnosť: 36 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 450 mm, šírka ložného priestoru: 2 550 mm, celková šírka: 2 550 mm, Rok výroby: 2026, Výbava: ABS, WIESE 3-axle low-loader with ramps and wheel recesses? NEW
Available approx. 4 months after order
---Vehicle Data---
Manufacturer: WIESE
* Model: WSA 3-36 TL
* Year of manufacture: 2025
* Axles: 3
* Gross weight: 39,000 kg
* Fifth wheel load: 12,000 kg
* Axle aggregate load: 27,000 kg
* Unladen weight: approx. 9,500 kg
* Tyres: 235/70 R17.5
* Brake: WABCO EBS with RSS
---Dimensions---
* Loading platform length: 13,450 mm
* Low-bed length: approx. 9,550 mm
* Fifth wheel section: approx. 3,640 mm
* Overall width: 2,550 mm
* Loading height at low-bed: approx. 920 mm
* Fifth wheel height: approx. 1,250 mm
---Equipment---
* 3 x SAF axles (9 t) with air suspension
* 1st axle: lift axle
* 3rd axle: trailing steering axle (lockable)
* Electronic air suspension E-TASC
* WABCO EBS braking system with Roll Stability Support
* Tyre pressure monitoring system for 12 tyres
* Full LED lighting
* 4 x LED work lights
* 15-pin socket + 2 x 7-pin sockets
---Body---
* Robust steel frame
* 28 mm hardwood floor / Omega floor
* 13 pairs of lashing rings (8,000 kg)
* Additional lashing points (5,000 daN)
* 2 pairs of wheel recesses
* Excavator trough
* Aluminium plug-in side boards on upper deck
* Toolbox at the front
---Ramps---
* 2 x aluminium drive-on ramps
* Dimensions: approx. 2,800 x 600 mm
* Load capacity: 27,460 kg
* Spring lifting mechanism
* Laterally adjustable
Nlodjyuq Igepfx Apzea
---Miscellaneous---
* Warning panels for over-width up to 3 m
* Contour marking in accordance with ECE-R48
* Technical documentation and TÜV inspection certificate
We are happy to provide further information upon request.
Malý inzerát
Egestorf
842 km
Sklápací náves
MEILLER3-achs Stahlm. mit E-Verdeck u. hydr. Heckklappe
Zavolať
Stav: nový, maximálna hmotnosť nákladu: 28 640 kg, celková hmotnosť: 35 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 7 600 mm, šírka ložného priestoru: 2 300 mm, výška ložného priestoru: 1 500 mm, objem nakladacieho priestoru: 25 m³, Rok výroby: 2026, Výbava: ABS, Brzda:
* Wabco EBS-E / ABS (elektronický brzdový systém s RSS)
* Nouzové odjištění pro pružinové válce
* Kotoučové brzdy 22,5"
* Finisher-brzda s upravenými zadními blatníky a manuálním koncovým spínačem
----Náprava:
* 3 x 9 t BPW nápravy
* Zvedací náprava s rozjezdovou asistencí
----Pérování:
* Vzduchové pérování s automatickým snížením při sklápění (pro zvýšení stability, pro finišery vypínatelné)
----Elektrika / Osvětlení:
* Systém monitorování tlaku v pneumatikách (TPMS)
* 1 x 15-pólová zásuvka pro přívěs
* 5-komorová zadní světla s ochrannou stříškou
* 1x přídavný LED pracovní světlomet
* Blikající boční poziční světla
----Obecné příslušenství:
* Hliníková vzduchojem
* Jost teleskopické ocelové opěrné nohy s talířovou patkou (odpojitelné pouze prázdné)
* 4m hliníkový žebřík uložený na pravé straně přes blatníky
* Uzavřené plastové individuální blatníky
* Sklopný boční ochranný rám proti podjetí
* Zadní tažné oko
* Sklopný přístupový žebřík vpředu vlevo
* Schránka na doklady na čelní stěně
----Rám:
* Podvozek z vysocepevnostní jemnozrnné oceli s torzními příčkami specifickými pro Meiller
----Sklápěcí korba:
* Ocelová polokorba se zadním sklápěním
* Čelní stěna se 600 mm předním stříškou jako nosič plachty
* Boční stěny s robustním vnějším horním profilem skloněným dovnitř
* Čelní a zadní stěna šikmé
----Tloušťka podlahy, bočních, čelních a zadních stěn:
Nledpfx Apjxxf Twezja
* Čelní stěna 4 mm z oceli BS 70
* Zadní čelo 4 mm z HBW 400 oceli
* Boční stěny z 4 mm HBW 450 oceli
* Podlaha na míru z 5/6 mm Hardox 450 oceli
----Hydraulický píst:
* Čelní hydraulický píst se středním pracovním tlakem
----Hydraulické zadní čelo:
* Hydraulicky ovládané a kyvné zadní čelo. Ovládání hydraulického zadního čela mechanickým kulovým ventilem
----Plachta:
* Elektrická shrnovací plachta -RAL 9006 bílý hliník- s ovládáním na podvozku a dálkovým ovládáním
----Ložný objem:
* cca 25 m³
----Výška sedla:
* Prázdné cca 1 247 mm
* Naložené cca 1 217 mm
----Lakování:
* Lakování podvozku v RAL 7021 černá šedá
* Sklápěcí korba v RAL 9006 bílý hliník
----Obecné informace:
* --Technicky přípustná celková hmotnost 39 000 kg--
* Změny a prodej vyhrazeny
* Nové vozidlo s tovární zárukou
* Ilustrační fotografie
----Dostupnost:
* K dispozici ihned, skladem Egestorf
Malý inzerát
Egestorf
841 km
Príves s pracovnou plošinou
MÜLLER-MITTELTAL3-achs mit Radmulden, 2 Ladehöhen, Klapprampen
Zavolať
Stav: nový, maximálna hmotnosť nákladu: 37 390 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0:
Nodpjq Euakofx Apzsla
----Brakes:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 3 x 11 t BPW axles
* Start-assist for maneuvering purposes on the first axle, controlled via EBS (without truck-side installation)
* Rear-most axle as trailing steering axle with electro-pneumatic steering lock
* Trailing axle lock operated from the cab for maneuvering via EBS (without truck-side installation)
----Suspension:
* Air suspension with lifting and lowering system and Ride-Height Return (RtR) valve
----Electrics / Lighting:
* Smart-Board mounted on the trailer as infotool with pressure sensors for total axle load display
* 15-pin power socket
* LED lighting 12 / 24 V
* Removable rear LED warning beacon
* 2 additional LED reversing lights
* 7-pin socket at the rear for overlength lighting
* Side marker lights with indicator function
* Tire pressure monitoring with display in the truck via EBS signal (without truck-side installation)
----General Attachments:
* Side underrun protection
* Support legs at the front and swiveling supports at the rear of the chassis
* Straight steel fenders
* Spare wheel holder in front of the bulkhead crossmember (without spare wheel)
* Mechanically adjustable warning sign sets at the front and rear
* Swivel arm as carrier for connection lines from the truck to the semi-trailer
----Low Loader Deck:
* 2nd king pin position
* Semi-trailer platform with 45° chamfered front corners and front toolbox made of galvanized, powder-coated sheet steel (W = 2,480 x H = 500 x L = 665 mm) with hinged lid
* 400 mm high folded and removable aluminum side boards (in RAL custom color) on the sides of the semi-trailer platform
* Removable rear board, 150 mm high
* Rear slope on the semi-trailer platform to low-bed section, approx. 700 mm long with chequered plate covering, as well as a perforated strip at the end for attaching aluminum approach ramps
* Semi-trailer platform with 50 mm clamped wooden planks, low-bed platform with 60 mm clamped wooden planks
* Checker plate over the axles
* 9 mechanical folding extensions for total width up to 3 meters, except on the rear slope (extension boards available, with closed storage compartment transversal under the loading area)
* 3 recesses under the platform for storing either aluminum approach ramps or wooden planks for wheel well covers
----Load Securing (LaSi package):
Semi-trailer Platform:
* Perforated outer frame, 45° angled, with pattern for lashing equipment (2 t lashing capacity per lashing point at a min. 480 mm spacing)
* Each side with 3 x 13.4 t lashing rings recessed in the floor (1 x on the semi-trailer platform, 1 x on the longitudinal beams after the step, 1 x above the middle axle next to the longitudinal beam)
Low-Bed Platform:
* Each side with 3 x 13.4 t lashing rings on the outer frame (1 x at the start of the semi-trailer platform step, 1 x start of the ramp slope, 1 x end of ramp slope)
* Each side with 2 x 10 t lashing rings (1 x between front wheel well and 1st axle, 1 x between 2nd and 3rd axle)
* Each side with 3 x 5 t lashing rings bolted to the outer frame of the wheel wells (2 on the front well, 1 on the rear)
----Excavator Arm Rest:
* Extended excavator arm rest from the end of the last fixed axle, over the steering axle, to the end beam, continuous, with internal reinforcement profile approx. W = 770 mm x Depth rear = 270 / Depth front 170 mm
* Each side with 2 x 6.4 t lashing ri

Informujte sa teraz
+49 201 858 95 507
+49 201 858 95 507
Vložiť inzerát teraz
*za inzerát/mesiac
Malý inzerát
Egestorf
842 km
Nízkopodlažný náves
MÜLLER-MITTELTAL3-achs mit Radmulden, 2 Ladehöhen, Klapprampen
Zavolať
Stav: nový, maximálna hmotnosť nákladu: 37 390 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0:
----Brakes:
* Wabco EBS-E (Electronic Braking System)
* Emergency release system for spring brake cylinders
* Drum brakes
----Axles:
* 3 x 11 t BPW axles
* Start-up aid for shunting purposes engaged on the first axle via EBS (without truck-side installation)
* Last axle as a trailing steering axle with electro-pneumatic steering lock
* Locking of the trailing axle from the cab for shunting purposes, operated via EBS (without truck-side installation)
Nedstpta Dspfx Apzela
----Suspension:
* Air suspension with lifting and lowering function as well as RtR valve
----Electrics / Lighting:
* Smart Board mounted as an info tool on the trailer with pressure sensors for total axle load display
* 15-pin power connector
* LED lighting 12 / 24 V
* Removable LED beacon at the rear
* 2 additional LED reversing lights
* 7-pin socket at the rear for overlength lighting
* Side marker lights with indicator control
* Tire pressure monitoring system with display function in the truck via EBS signal (without truck-side installation)
----General attachments:
* Side underrun protection
* Landing legs at the front and swing-down supports at the rear of the chassis
* Straight steel mudguards
* Spare wheel holder in front of the front wall cross member (without spare wheel)
* Mechanically adjustable warning signage packages at the front and rear
* Swivel arm as carrier for connection lines from the truck to the semi-trailer
----Low-bed loading area:
* 2nd king pin position
* Fifth wheel platform with 45° beveled front corners and a front toolbox made of galvanized, powder-coated sheet steel, W = 2,480 x H = 500 x L = 665 mm with hinged lid
* 400 mm aluminum side boards on the fifth wheel platform (custom RAL color), foldable and removable
* Rear wall -150 mm- slotted in
* Rear chamfer on the fifth wheel platform to low-bed, approx. 700 mm long with checker plate cover and at the end a perforated strip for hooking in aluminum approach ramps
* Fifth wheel platform with 50 mm clamped wooden floorboards, and low-bed platform with 60 mm clamped wooden floorboards
* Checker plate above the axles
* 9 mechanical folding wideners to 3 m total width, but not on the rear chamfer (widening planks available with closed storage box transversely under the loading area)
* 3 receiver shafts under the fifth wheel platform for optional storage of aluminum approach ramps or wooden planks for covering wheel recesses
----Load securing (LaSi Package):
Fifth wheel platform:
* Perforated outer frame bent at 45°, with hole pattern for lashing equipment (2 t lashing capacity per point with a minimum spacing of 480 mm)
* Each side: 3 x 13.4 t lashing rings recessed in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal beams after the kick-up, 1 x above the middle axle next to the longitudinal beam)
Low-bed platform:
* Each side: 3 x 13.4 t lashing rings on the outer frame (1 x at the start of the fifth wheel platform kick-up, 1 x at the beginning of the approach ramp, 1 x at the end of the approach ramp)
* Each side: 2 x 10 t lashing rings (1 x between front wheel recess and 1st axle, 1 x between the 2nd and 3rd axle)
* Each side: 3 x 5 t lashing rings bolted to the outer frames of the wheel recesses (2 at the front wheel recess, 1 at the rear wheel recess)
----Excavator arm trough:
* Extended excavator arm trough, continuous from end of last rigid axle over steering axle to end cross member, with inner reinforcement profile approx. W = 770 mm x D rear = 27
Malý inzerát
Egestorf
842 km
Príves s pracovnou plošinou
MÜLLER-MITTELTAL3-achs Plateu Anhänger, mit 3 Kabelböcken
Zavolať
Stav: nový, maximálna hmotnosť nákladu: 17 650 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 230 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2026, * TP 30.0 with 3 cable drum supports
Njdox Nli Nspfx Apzjla
----Braking system:
* Wabco TEBS (electronic braking system)
* Emergency release system for spring-actuated cylinders
* Drum brakes
----Axles:
* 3 x 11 t Gigant axles
----Suspension:
* 17.5" air suspension with lifting and lowering device
----Drawbar:
* Drawbar, 1,800 mm long with 40 mm towing eye
----Electrics / Lighting:
* Tire pressure monitoring with display capability in the truck cab via EBS signal – no installation required on the truck side
* 15-pin power connector
* 2 additional LED reversing spotlights (activated by reverse gear)
* LED lighting
----General Equipment:
* Aluminium air tank
* Stainless steel side-mounted toolbox approx. 1,000 x 300 x 600 mm
* Side underrun protection
* Plastic quarter mudguards
* Rear underrun protection
----Platform:
* Zurr-fix external frame, 45° angled, perforated for lashing equipment, lashing capacity per lashing point 2,000 kg at 480 mm intervals
* Installation of 3,000 kg drop lashing rings possible at approx. 600 mm intervals – delivery includes 12 pcs. 3,000 kg lashing rings on each side
* 5 pockets on each side for posts 100 x 50 mm in the outer frame (posts not included)
* 30 mm phenolic plywood floor
----Drum supports:
* 3 galvanized drum supports, secured by container locks, with side forklift pockets, 800 mm center/center (pocket width: 185 mm)
* Maximum drum diameter: 2,600 mm; maximum drum width: 1,650 mm
* Clear width between support arms approx. 1,775 mm, with cross brace
* Maximum drum weight per drum support: 6,000 kg
* Without drive and drum brake
* Support arm with tension lock for securing the drum axle
* Steel drum axle, diameter 76 mm, with centering and rotatable ends
* 2 locating rings
* 2 polyamide centering cones
* 4 pcs. 3.2 t lashing eyes on the support arms for customer-side securing of the drum against rotation and uncoiling
----Loading height:
* Loaded approx. 1,040 mm
----Painting:
* Chassis, bogie, drawbar, outer frame, underrun protection hot-dip galvanized
* Axles painted in black shade
----Information:
* Technical uprating to 30 t GVW possible
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Available from CW 28/2026
Malý inzerát
Egestorf
842 km
Príves
MÜLLER-MITTELTAL3-achs Plateu Anhänger, mit 3 Kabelböcken
Zavolať
Stav: nový, maximálna hmotnosť nákladu: 17 650 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 230 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2026, * TP 30.0 with 3 cable drum supports
----Brakes:
* Wabco TEBS (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
Njdpfjx Nlkaex Apzjla
----Axles:
* 3 x 11 t Gigant axles
----Suspension:
* 17.5" air suspension with raising and lowering system
----Drawbar:
* 1,800 mm long drawbar with 40 mm towing eye
----Electrics / Lighting:
* Tyre pressure monitoring with display option in the truck's display via EBS signal -without installation on the truck side-
* 15-pin power socket
* 2 additional LED reverse lights (activated by reverse gear)
* LED lighting
----General Attachments:
* Aluminium air tank
* Stainless steel side toolbox, approx. 1,000 x 300 x 600 mm
* Side underrun protection
* Plastic quarter mudguards
* Rear underrun protection
----Flatbed:
* Zurr-fix outer frame, 45° angled, with hole pattern for lashing devices; lashing force per lashing point 2,000 kg at 480 mm intervals
* Option to install 3,000 kg drop-in lashing rings at approx. 600 mm intervals - 12 x 3,000 kg lashing rings included per side
* 5 pockets per side for 100 x 50 mm pipe stakes in the outer frame - stakes not included in delivery
* 30 mm phenolic plywood floor
----Cable Drum Supports:
* 3 galvanised cable drum supports, secured with container locks, with side forklift pockets spaced 800 mm centre/centre (pocket width 185 mm)
* Maximum drum diameter 2,600 mm and maximum drum width 1,650 mm
* Clear width between support arms approx. 1,775 mm, with cross connection
* Max. drum weight per support: 6,000 kg
* No drive or drum brake
* Support arm with tension lock for securing the drum axle
* 76 mm diameter steel drum axle, centred, with rotating ends
* 2 locating rings
* 2 polyamide centring cones
* 4 x 3.2 t lashing eyes on support arms for customer lashing to prevent drum rotation and unwinding
----Loading Height:
* Loaded approx. 1,040 mm
----Paintwork:
* Chassis, bogie, drawbar, outer frame, underrun protection: hot-dip galvanised
* Axles painted in black
Malý inzerát
Egestorf
842 km
Príves
MÜLLER-MITTELTAL3-achs Plateu Anhänger, mit 3 Kabelböcken
Zavolať
Stav: nový, maximálna hmotnosť nákladu: 17 650 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 230 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2026, * TP 30.0 with 3 cable drum supports
----Brake system:
* Wabco TEBS (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 3 x 11 t Gigant axles
----Suspension:
* 17.5" air suspension with lifting and lowering system
----Drawbar:
* Drawbar 1,800 mm long with 40 mm towing eye
----Electrics / Lighting:
* Tyre pressure monitoring with display function in the truck cockpit via EBS signal (no installation required on the truck side)
* 15-pin power connector
* 2 additional LED reversing lights (switched via reverse gear)
* LED lighting
----General attachments:
* Aluminium air tank
* Stainless steel side toolbox approx. 1,000 x 300 x 600 mm
* Side underrun protection
* Plastic quarter mudguards
* Rear underrun protection
----Platform body:
* Zurr-fix outer frame, 45° edged with hole pattern for lashing equipment, lashing capacity per lashing point 2,000 kg at 480 mm spacing
* Installation of 3,000 kg drop-in lashing brackets possible at approx. 600 mm intervals – each side supplied with 12 x 3,000 kg lashing brackets as standard
* Each side with 5 pockets for stanchions 100 x 50 mm in the outer frame (stakes not included)
* 30 mm phenolic plywood floor
----Drum supports:
* 3 galvanised drum supports secured with container locks, with side forklift pockets, centre-to-centre 800 mm (pocket width 185 mm)
* Maximum drum diameter 2,600 mm and maximum drum width 1,650 mm
* Clear width between support arms approx. 1,775 mm, with cross brace
* Maximum drum weight per cable drum support: 6,000 kg
* Without drive and drum brake
* Support arm includes clamping lock for securing the drum shaft
* Steel drum shaft, 76 mm diameter, with centring and rotating ends
* 2 locating rings
* 2 polyamide centring cones
* 4 x 3.2 t lashing eyes on the support arms for customer-side securing of the drum against rotation and unwinding
----Loading height:
* Approx. 1,040 mm loaded
----Paintwork:
* Chassis, turntable bogie, drawbar, outer frame and underrun protection hot-dip galvanised
* Axles painted in a shade of black
----Information:
* Technical upgrade to 30 t GVW possible
Nljdpfex Nlkgox Apzsa
* New vehicle with manufacturer’s warranty
* Errors and prior sale excepted
----Delivery time:
* Available from week 28 / 2026
Malý inzerát
Dortmund
933 km
Náves s nízkym nakladacím zariadením
Meusburger3-Achs-Tele-Semi mit 1 Paar Radmulden
Zavolať
Stav: nový, pohotovostná hmotnosť: 8 900 kg, maximálna hmotnosť nákladu: 40 100 kg, celková hmotnosť: 49 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 200 mm, šírka ložného priestoru: 2 550 mm, zavesenie: vzduch, veľkosť pneumatiky: 245/70 R 17,5, farba: sivý, prevádzková hmotnosť: 8 900 kg, Podvozok:
- Pevná oceľová rámová zváraná konštrukcia s predným zalomením rámu a rovným ložným povrchom so skosením vzadu cca 500x100 mm
- Krk rámu 200 mm s prednými skosenými rohmi
- Skosený koniec labutieho krku cca 500 x 100 mm (vonkajší rám v oblasti zadného skosenia opatrený stúpacími rebrami)
- 2 polohy kráľovského čapu s výmenným 2” čapom
- Vonkajší rám uzavretý smerom von, dierovaný profil
- Ložná plocha s výsuvným centrálnym rámom, výsuv cca 2 000 mm, po 500 mm s pneumatickým aretovaním
- Rám pred a za delením so stupňom 80x80 mm
- Spevnené vyhotovenie rámu / bodové zaťaženie v zasunutom stave v ťažisku
- Bez výsuvných rozširovacích prvkov na ložnej ploche, pripravené na dodatočnú montáž (vodicí rúry zvarené v ráme)
- S bagrovo jamou (bez krytu), hĺbka cca 220 mm, šírka cca 600 mm, začína cca za 2. nápravou po koniec vozidla
- 1 pár kolových jám medzi 1. a 2. nápravou s oceľovým krytím (Körapur povrch), hĺbka cca 400 mm
- Proti podbehnutiu = predĺžený záverečný plech
- Zadné podpery s rýchlym spúšťaním
Nápravy, riadenie a pneumatiky:
- BPW vzduchové nápravy, každá 10 t nosnosť, priemer vankúša 360 mm
- S-cams 300/200 mm, bezazbestové brzdové obloženie
- Automatický napínač ťahadla
- Zdvih a spúšťanie celkový zdvih cca 200 mm
- 2. jazdná poloha cez guľový ventil +50 mm
- 1. náprava zdvíhacia (káblovaná cez EBS), automatické prepínanie s núdzovým mechanickým ovládaním tlačidlom na návesu
- 3. náprava vlečená, s elektrickou a mechanickou aretáciou
- 12 oceľových diskov, 10-dierové, so stredovým upevnením
- 12 pneumatík 245/70 R 17.5 143/141J, bezdušové
- Vrátane monitorovania tlaku v pneumatikách
Príslušenstvo:
- Na labutom krku zasúvateľné bočnice a zadné čelo, výška cca 400 mm
- Držiak rezervného kolesa
- Bočný hliníkový nárazník
- 4 podkladové kliny vrátane držiakov
- Podlhovastý držiak ŠPZ v záverečnom plechu
- 1 zasúvateľná ECE tabuľa vzadu
- 11 párov ZK modulov 10t naboku:
- 2x na labutom krku
- 2x na ložnej ploche pred výsuvom
- 7x za výsuvom
- Výsuvné výstražné tabule vrátane 3 pozičných svetiel vpredu na oporných nohách a vzadu pred záverečným plechom, bezstupňovo vysúvateľné na šírku ložnej plochy do 4 500 mm
- 4 zasúvateľné držiaky pre výstražné tabule v rúrkach na ložnej ploche
- 6 párov zásuvných vreciek na laty 100x50 mm po bokoch
- 2 priečne rady zásuvných vreciek na laty 100x50 mm na labutom krku od vonkajšieho rámu do hlavného rámu (1x pred a 1x za kráľovským čapom)
Nljdexnnk Djpfx Apzja
- 3 priečne rady zásuvných vreciek na laty 100x50 mm na ložnej ploche od vonkajšieho rámu do hlavného rámu (1x pred výsuvom, 1x za výsuvom a 1x za 3. nápravou)
- 2 páry oceľových dosiek v ložnej ploche pre zámky na kontajner na 1x 20ft kontajner
- Gumová zásterka namontovaná na ochranu proti podbehnutiu
Náves je voliteľne dostupný s rampami.
Malý inzerát
Dortmund
933 km
Náves s nízkym nakladacím zariadením
FaymonvilleMAX Trailer 4-Achs-Jumbo-Semi mit Plane
Zavolať
Stav: nový, maximálna hmotnosť nákladu: 38 100 kg, celková hmotnosť: 50 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 100 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 760 mm, zavesenie: vzduch, veľkosť pneumatiky: 205/65 R17.5 3PMSF, farba: sivý, Výbava: ABS, Gooseneck:
Gooseneck with rear chamfer approx. 750 mm x 10°
3 pairs of lashing rings
30 mm thick hardwood flooring
Loading platform:
5 pairs of folding lashing rings on the outside
3 pairs of folding lashing rings on the outside
1 pair of horizontal lashing rings at the front of the loading platform
Cutouts in the outer frame of the loading platform for attaching tie-down straps
Approx. 48 mm thick hardwood flooring, over the axles with checker plate covering
Landing gear:
JOST landing legs with 2-speed gearbox for 24 t lifting capacity
Axles and tyres:
BPW axles, two fixed and two self-steering axles, air suspension, drum brakes, with raise/lower function
The self-steering axles can be locked for reversing via electromagnet, activated through reverse gear or manually
Axle tools
Tyres 205/65 R17.5 3PMSF
Braking system:
WABCO braking system according to EU regulations with EBS-E
Steel construction:
High-strength fine grain steel frame
Steel grades:
S355J2+N/S355MC
S690QL/S700MC
Electrical equipment:
Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK
ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets
Connection in accordance with ISO
Paintwork:
Premium, durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component zinc dust primer
High-quality 2-component top coat, single color in MB 7350 Novagrau
Metallic paint not available
Rear section metallized and painted in RAL 9010
Standard equipment included:
1 spare wheel 205/65 R 17.5
TPMS tire pressure monitoring system in accordance with ECE R 141
At the galvanized front connection strip: yellow-red air couplings
4 wheel chocks with brackets on the front wall
Mounting at the rear of the gooseneck for ALU loading ramps
Galvanized folding supports underneath the sloped section of the loading area
One bracket for a rotating beacon at the rear of the trailer
Height-adjustable curtain structure
Galvanized front wall with a tensioning mechanism for the sliding curtains
Adjustable height approx. 400 mm
"EDSCHA" brand roof, forward-sliding on ALU roof beam profiles, bolted to front and rear walls
3 pairs of sliding stanchions on the loading area
The superstructure can be hydraulically extended at the rear left and right by approx. 750 mm
Sliding roof with lift-up portal beam
Sliding curtain with 700 mm extra length, with tensioning straps approx. every 600 mm
Height to top edge of superstructure approx. 3,960 mm
Driving with open sliding roof is not permitted and will cause damage to the curtain
Hanger bar for ALU loading ramps at the rear of the vehicle
On the gooseneck and on the left and right of the rear panel, each with a bracket for warning signs including socket
Mudflap at the rear of the trailer
European reflective plates at the rear of the trailer
7 pairs of stake pockets for 100 x 50 mm insertable stakes in the outer frame of the loading platform
Lifting axle on the front axle controlled by TEBS E depending on current axle load and loading condition
Superstructure at the rear with closed ALU swing doors
On the checker plate on the gooseneck and loading area, an integrated sand coating to prevent slipping
Central lubrication system BEKAMAX with standard grease NLGI-2 and removable pump guard
80 km/h speed stickers at the rear and on both sides
Nledpfx Astphtmepzja
Load gauge for axle load determination including load diagram
Malý inzerát
Dortmund
933 km
Náves s nízkym nakladacím zariadením
Meusburger3-Achs-Semi mit 2 Paar Radmulden
Zavolať
Stav: nový, pohotovostná hmotnosť: 8 490 kg, maximálna hmotnosť nákladu: 40 510 kg, celková hmotnosť: 49 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 200 mm, šírka ložného priestoru: 2 550 mm, veľkosť pneumatiky: 245/70 R 17,5, farba: sivý, prevádzková hmotnosť: 8 490 kg, Výbava: ABS, Chassis:
- Robust steel frame construction with front frame offset and flat loading platform with rear taper approx. 500x100 mm
- Neck height 200 mm with chamfered corners
- Sloping gooseneck end approx. 500 x 100 mm (traction ribs on the outer frame in the area of the rear taper)
- 2 king pin positions with interchangeable 2" king pin
- Outer frame closed to the outside as a perforated outer frame for lashing with tension straps
- Reinforced frame design / point load at center of gravity
- Preparations for extendable width extensions in the loading area
- With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting roughly after 2nd axle to the end of the vehicle
- 1 pair of wheel recesses in front of the axle with steel covers
- (Covers with Körapur coating), depth approx. 400 mm, and 1 pair of wheel recesses between 1st and 2nd axle with steel covers
- Side underrun protection = extended end plate
- Drop-down supports at the rear
Floor:
- 35 mm larch wooden floor with aluminum omega profiles
Axles, Steering and Tires:
- BPW air suspension axles, each with 10 t axle load, bellows diameter 360 mm
- S-cam brakes 300/200 mm, asbestos-free brake linings
- Automatic slack adjusters
- Lifting and lowering device with total lift approx. 200 mm
- 2nd driving position via ball valve +50 mm
- 1st axle lift axle (wired via EBS), automatic activation, with mechanical emergency operation via push button on the trailer
- 3rd axle as friction-steered trailing axle with electrical and mechanical lock
- 12 steel disc wheels, 10-hole, hub-centered
- 12 tires 245/70 R 17.5 143/141J, tubeless
- Includes tire pressure monitoring system
Brake System:
- Two-line brake system with EBS-E including RSS
- EBS (WABCO 4S3M)
- Spring-loaded parking brake
- Pneumatic connections yellow/red
Painting:
- Steel shot blasting, spray galvanizing of chassis and priming
- Painting of chassis/wheel hubs/outer frame in DB 7350 Novagrau
Accessories:
- Removable side and rear walls on the gooseneck, approx. 400 mm high
- Spare wheel holder
- Side aluminum underrun protection
- 4 wheel chocks
- Steel mudguards with Clear-Pass
- Long license plate holder in end plate
- 1 plug-in ECE plate at the rear
- 11 pairs of ZK modules 10t on the side:
- 2x on the gooseneck
- 9x on the loading platform
- Without rear towing eyes
- Extending warning signs incl. 3 position lights each, front at landing gear and rear in front of end plate, infinitely extendable to a loading width of 4,500 mm
- 4 holders for warning signs for plugging into stake pockets on the loading platform
- 6 pairs of stake pockets at the side for plug-in stakes 100x50 mm
Nodowu A Slepfx Apzela
- 2 transverse rows of stake pockets for plug-in stakes 100x50 mm on the gooseneck from outer frame inward to main frame (1x in front of and 1x behind the king pin positions)
- 3 transverse rows of stake pockets for plug-in stakes 100x50 mm on the loading platform from outer frame inward to main frame (1x in the front area, 1x before 1st axle and 1x after 3rd axle)
- 2 pairs of steel plates in the loading area for container locks to accommodate 1x 20ft container
- Rubber skirt mounted on underrun protection
- Preparation (=cable routing for NATO cable and hole pattern for later installation of NATO socket at the front of the end plate as well as bracket on the vehicle) for retrofitting an electro-hydraulic unit at the rear right for possible operation of drive-on ramps
- Mechanical 24 t landing legs with single-side op
Malý inzerát
Dortmund
933 km
Náves s nízkym nakladacím zariadením
FaymonvilleMAX Trailer 3-Achs-Tiefbett mit Pendelachsen
Zavolať
Stav: nový, pohotovostná hmotnosť: 17 500 kg, maximálna hmotnosť nákladu: 43 500 kg, celková hmotnosť: 61 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 7 550 mm, šírka ložného priestoru: 2 750 mm, výška ložného priestoru: 400 mm, veľkosť pneumatiky: 245/70 R 17.5, farba: sivý, Výbava: ABS, Neck (Gooseneck):
- Gooseneck in SNT design for optimizing loading platform length, approx. 3,750 mm long
- Gooseneck hydraulically liftable/lowerable and detachable
- For tractor units: 6x4 or 8x4
Deck (Lowbed):
- Lowbed with external beams, extendable design, "SUPER LOW" type, approx. 7,550 mm long
- Lowbed with fixed hardwood floor, approx. 40 mm thick, with mechanical locking
- Service lines protected and routed within the extendable beams, automatically adjusting to the respective lowbed length
Rear chassis:
- Rear chassis with closed outer frame, checker plate surface, and continuous prism excavator trough, approx. 1,450/900 x 505 mm, open at the rear
- 2 pairs of stake pockets (100 x 50 mm) on the outer frame for plug-in stakes
Axles and tires:
- "PENDULUM AXLE", all axles forced-steered hydromechanically
- Burst pipe valve to axle compensation cylinder with automatic RESET function
- Hydraulic cylinders with shut-off valves and plug pin for securing in raised position
- Technical axle load: 12,000 kg
- Hydraulic axle compensation
- Tires 245/70 R 17.5 / 3PMSF
Accessories included:
- Prepared for mounted container locks for 1x 20ft or 1x 40ft container on outer beams
- 2" king pin
Nljdpfx Apjh Hm Thezea
- One galvanized steel front wall, approx. 400 mm high
- One spare wheel with holder
- Yellow-red air couplings on the galvanized front connector strip
- 4 wheel chocks
- Remote steering front and rear operated by wire remote control via pushbuttons, with single-track axle alignment control
- Hydraulic couplings between gooseneck and lowbed as multi-coupling instead of screw type
- Electro-hydraulic power pack
- White reflective tape as per EU regulations on the sides, at the extension and red on the rear
- 2 wooden blocks 500x250x200 mm
- European reflective warning panels (red-yellow) at trailer rear
- On gooseneck and rear section: holders for warning signs with sockets left and right
- Central lubrication system with 2 BEKAMAX (Pico) pumps, standard grease NLGI-2
- Load gauge to determine axle loads, incl. load chart
- On gooseneck, plug-in aluminum side walls and rear wall approx. 2,000 x 400 mm
- Rear galvanized plug-in stakes removable (body length approx. 2,120 mm)
- Separate air connection with air gun on the gooseneck
- Duomatic air coupling from gooseneck to lowbed
- Gooseneck closed at rear upper section with removable cover
- 1 pair of steel ramps for bridging the lowbed receptacle hooks
- Four approx. 400 mm extendable warning signs, approx. 423 x 423 mm
- Radio remote control for rear steering in addition to cable remote, with receiver indicator lights for single-track alignment
- 6 pairs threaded blocks between lashing rings under top chord on outer beam for installation of screwable RUD rings VLBG-4
- 7 pairs of stake pockets (100 x 50 mm) in outer frame of load platform
- Folding extensions, approx. 230 mm per side
- Anti-slip sand coating painted on load platform
- Dipper stick trough at front and rear of rear chassis closed with plug-in plates
- HRM Metallization (High Resistance Metallization) of the outer frame
- Complete steel construction shot-blasted, then defined visible surfaces metallized with ZINACOR 850 (Zinc 85% - Alu 15%) by hot finishing
Malý inzerát
Egestorf
842 km
Trojsmerný sklápačský príves
MÜLLER-MITTELTAL2 achs Tandem Stahl 3 Seitenkip. mit Kombiklappe
Zavolať
Stav: použitý, maximálna hmotnosť nákladu: 10 870 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 06/2025, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2023, Výbava: ABS, * KA-TA-R 14.4:
* Wabco ABS system
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 7 tonne Gigant axles
* Parabolic suspension with tandem equalizer unit
* Drawbar height adjustable by approx. 300 mm with 40 mm flange towing eye
* Jost mechanical landing gear at the front
* 2 mechanical folding supports at the rear
* Plastic toolbox approx. 650 x 350 x 320 mm, mounted front right side of the chassis
* 15-pin electrical connector
* Multi-chamber tail lights
* Bolt-on underride protection
* Plastic quarter mudguards
* Net hooks at each position of the central locking, plus 2 on the front wall
* Chassis made of fine-grain steel
* Steel pallet 3-way tipper body, continuous side panels with internal tube reinforcements, drop sides without central stanchions, foldable with side wall spring lifts
* Bolted rear stanchions
* Combination steel wing doors at the rear, asymmetrically split 2-wing design, can pivot and lock at 270°, not foldable, with additional pendulum frame for automatic rear wall opening during tipping operation, locking via galvanized rotary rod lock at the rear and central locking, deactivation function for the automatic rear wall function when tipping backwards with the wing door open
* Each corner fitted with one 5-ton lashing point, four 3-ton lashing rings recessed into the outer frame on each side
* 4 mm fine-grain steel floor plate
* Rear mounting rail for loading ramps
* Reinforced superstructure with load securing certificate
* 1 pair of aluminium loading ramps, approx. 3,570 x 410 mm (load capacity 10 tons per pair), suitable for rubber-tyred and tracked vehicles
Nljdpfel Th Htox Apzea
* Lockable storage compartment for ramps recessed into the chassis below the loading surface, accessible from the rear
* Chassis, drawbar, underride guard, rear stanchion and folding supports at the rear hot-dip galvanized
* Axles, springs, air tank, and landing gear painted in black
* Tyres: 285/70 R19.5
* Side panels painted to RAL 9010 pure white
* Painting of side walls in other RAL colours possible at extra cost
* Vehicle has a day permit (unused)
* Errors and prior sale excepted
* Immediately available ex Egestorf
Malý inzerát
Egestorf
842 km
Nízkozdvižný príves
MÜLLER-MITTELTAL2 achs Tandem Stahl 3 Seitenkip. mit Kombiklappe
Zavolať
Stav: použitý, maximálna hmotnosť nákladu: 10 870 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 06/2025, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2023, Výbava: ABS, * KA-TA-R 14.4:
* Wabco ABS
* Emergency release device for spring-loaded brake cylinders
* Drum brakes
Nljdpel Th Duefx Apzsa
* 2 x 7 t Gigant axles
* Parabolic springs with tandem equalization unit
* Height-adjustable drawbar (approx. 300 mm) with 40 mm flange towing eye
* Jost mechanical landing gear at the front
* Two mechanical folding support legs at the rear
* Plastic toolbox approx. 650 x 350 x 320 mm mounted on the front right-hand side of the chassis
* 15-pin electrical plug
* Multi-chamber tail lights
* Bolt-on underrun protection
* Plastic quarter fenders
* Lashing hooks located at the central locking bearings and 2 pieces at the front wall
* Chassis made of fine-grain steel
* Steel pallet three-way tipper body with continuous side walls, top edge reinforced with inner tubes, without center posts, side walls foldable with board wall spring lifting device
* Rear posts bolted
* Combination steel wing doors at rear; 2-leaf, asymmetrically split, can be swivelled and locked to 270°, cannot be folded – with additional pendulum frame for automatic rear wall opening during tipping; locking via galvanized rotary bolt at the rear and central locking; deactivation function for automatic rear wall opening during rear tipping with open wing door
* Each corner fitted with 1 x 5 t lashing point, plus 4 x 3 t lashing rings recessed into the outer frame on each side
* 4 mm steel floor made of fine-grain steel
* Rear mounting rail for loading ramps
* Reinforced body with load securing certificate
* 1 pair of aluminum loading ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tired and tracked vehicles
* Lockable storage compartment for ramps recessed under the load floor at the rear of the chassis
* Chassis, drawbar, underrun protection, rear posts, and rear folding supports hot-dip galvanized
* Axles, springs, air tanks, and landing gear painted black
* Tyres: 285/70 R19.5
* Sideboard painting in RAL 9010 pure white
* Side wall painting in a RAL color of your choice available at extra cost
* Vehicle has a one-day registration (not in use)
* Subject to errors and prior sale
* Immediately available from Egestorf
Malý inzerát
Waltrop
935 km
Sklápací náves
WieltonNW-3 Getreidemulde 3-Achs Hinterkipp-Aluminiummulde mit 51cbm
Zavolať
Stav: použitý, pohotovostná hmotnosť: 6 020 kg, maximálna hmotnosť nákladu: 29 980 kg, celková hmotnosť: 36 000 kg, prvá registrácia: 11/2023, ďalšia kontrola (TÜV): 05/2026, dĺžka ložného priestoru: 9 890 mm, šírka ložného priestoru: 2 460 mm, výška ložného priestoru: 2 100 mm, objem nakladacieho priestoru: 51 m³, zavesenie: vzduch, farba: iný, Rok výroby: 2023, typ prevodu: iný, veľkosť zadnej pneumatiky: 385/65 R 22,5, kabína vodiča: iný, emisná trieda: žiadny, Výbava: ABS, Grain tipper with 51 cbm capacity.
* 4-way locking system
* ABS
* Support device
* Aluminium rims
* Aluminium rims ET 120
* Saddle height unladen: 1200 mm
* Control box for air suspension
* ECAS
* Rubber seal
Nledpfx Apsyc T H Iozea
* Grain slider
* 2'' kingpin
* Single lift axle
* Disc brakes
* Slanted front wall
* Smart Board
* Bow
* Road chassis frame
* Folding underrun protection
We expressly reserve the right to prior sale, as we also offer this item on other platforms. Information about accessories is given without guarantee. Changes, interim sale, or errors excepted. We urgently recommend and offer an inspection and testing, to ensure that there are no misconceptions regarding condition and suitability. Inspections and tests are possible at any time by prior arrangement and are expressly encouraged.
We handle all formalities and deliver the vehicle with transfer plates as required, at extra cost.
Images are partially edited and are for initial reference only. If you are interested, please contact us to request current photos.
Malý inzerát
Dautphetal - Wolfgruben
837 km
Polonáves na prepravu dobytka
KÄSSBOHRER1 Achs für 4 Pferde oder 3 Kutschen mit Wohnabt.
Zavolať
Stav: použitý, maximálna hmotnosť nákladu: 8 500 kg, celková hmotnosť: 13 500 kg, konfigurácia náprav: 1 náprava, prvá registrácia: 10/1983, dĺžka ložného priestoru: 9 900 mm, šírka ložného priestoru: 2 400 mm, výška ložného priestoru: 2 900 mm, celková šírka: 2 500 mm, celková výška: 3 900 mm, * Kässbohrer 1-axle box trailer for 4 horses or 3 carriages with living compartment & cupboards
* 1 large rear flap - 1 large side flap - 1 small entrance door at the front plus storage compartment
* Approved as a semi-trailer for the transport of animals for sporting purposes - horse transporter -
* Loading area length: 9,900 mm - Total length: 10,520 mm
* Loading area width: 2,400 mm - Total width: 2,500 mm
* Internal height: approx. 2,900 mm - Overall height: 3,900 mm
* Permissible total weight: 8,770 kg - Unladen weight: 3,750 kg - Payload: 5,020 kg
* Technically in good condition - Trailer is sealed and dry - visual refurbishments recommended
* German vehicle - German vehicle registration document -
* Viewing by appointment only
* Contact person: Mr. Andreas Vogel
* The information provided online is non-binding and intended as a general description.
* They do not constitute guaranteed characteristics.
* The seller assumes no liability for typographical or data transmission errors.
Njdpsxglfvjfx Apzela
* Subject to change, error, and prior sale.
Malý inzerát
Twist
987 km
Otvorený náves s plachtou
WEB-TRAILER3-Achs Schiebeplane mit XL-Zertifikat (opt. LBW)
Zavolať
Stav: nový, celková hmotnosť: 38 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 620 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 2 730 mm, celková šírka: 2 550 mm, celková výška: 4 000 mm, Rok výroby: 2026, Výbava: ABS, PRSSQ 27 SYS Three-Axle Curtainsider with Transverse Plywood Floor
Curtainsider body, side wall height 2650 mm from loading surface to lower edge of exterior beam
Chassis width approx. 2480 mm
Chassis length approx. 13,620 mm
Ride height, unladen: approx. 1250 mm at 1130 mm fifth wheel height
COC (Certificate of Conformity)
Chassis frame construction made from welded longitudinal beams and through-inserted cross members
External frame height approx. 125 mm, 4 mm with groove for lashing rings and outer lashing holes
13 pairs of lashing rings (5t certificate)
Axles: Manufacturer’s free choice (SAF/BPW)
9-ton axle, 22.5" with large disc brake
EBS braking system by Knorr or Wabco
Tire pressure monitoring system
Flashing side marker lights
European brand tires 385/65 R 22.5
Body certificate DIN EN 12642 XL valid with two rows of wooden slats
Certificate for 9t forklift axle load according to DIN EN 283
Certificate for 5t per lashing ring
Rear portal with 4 internal locking bars, door leaves made of steel sandwich profiles
Sliding roof with automatic locking, opens from rear
Nedog Dkxzopfx Apzola
3 sets of side sliding curtains
Front wall: steel, with 400 mm internal steel cassette, approx. 2.40m wear protection plate
24-volt lighting system with LED multifunction lights
27mm phenolic resin coated plywood floor, laid transversely
Reinforced roof tarpaulin, 12x12 roof fabric
Optional: can be equipped with tail lift
Optional: can be equipped with internal drop sides
Optional: can be equipped with FLEXSTRAP system
Optional: can be equipped with pallet box, spare tire, etc.
Body painted in RAL colors as required
Chassis in RAL 9005 or MB 7350, other colors at extra cost depending on powder availability
KTL coating with zinc phosphating plus powder, maximum corrosion protection
Optional: hot-dip galvanized
Ex-works price
Attention!!!
Images show optional extras
Get advice and a free, non-binding quote.
Leasing, financing, or hire purchase available!
We cater to your needs! Contact us for your individual quote.
Subject to errors and prior sale!
Malý inzerát
Dortmund
933 km
Príves s plošinou a plachtou
FaymonvilleMT 3-Achs-Jumbo-Semi-Rampen-Planenaufb.
Zavolať
Stav: nový, pohotovostná hmotnosť: 12 300 kg, maximálna hmotnosť nákladu: 37 200 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R17.5, farba: sivý, Výbava: ABS, Gooseneck:
- Gooseneck with rear chamfer approx. 750 mm x 10°
- 30 mm thick hardwood flooring
Two-part steel ramps:
- One pair of galvanized two-part steel ramps, approx. 3,185 x 1,420 x 1,250 mm, with grating surface
- Ramps with hydraulically folding ramp sections, hydraulic lifting mechanism
Gooseneck:
- Gooseneck with rear chamfer approx. 750 mm x 10°
- 3 pairs of lashing rings
- 30 mm thick hardwood flooring
Nlodpfx Apetvfkfjzoa
Two-part steel ramps:
- One pair of galvanized two-part steel ramps, approx. 3,185 x 1,420 x 1,250 mm, with grating surface
- Ramps with hydraulically folding ramp sections, hydraulic lifting mechanism
- Maximum load per pair: 30,000 kg
Loading platform:
- Loading area with rear chamfer approx. 1,000 mm x 8°
- Approx. 48 mm thick hardwood flooring, patterned steel plate covering above the axles
Axles and tires:
- BPW axles and suspension, two fixed axles, one self-steering axle
- Air suspension with lifting and lowering valve
- The self-steering axles can be locked via electromagnetic reverse gear interlock or manually
- 235/75 R17.5 3PMSF tires
Accessories included:
- 1 spare wheel with holder
- TPMS tire pressure monitoring system according to ECE R 141
- 2" king pin
- One galvanized steel headboard
- Yellow-red air couplings on the galvanized front connection bar
- 4 wheel chocks with holders on the front wall
- Mounts at the rear end of the gooseneck for ALU loading ramps
- 3-height ALU boards
- Galvanized folding supports under the chamfered loading area
- Height-adjustable tarpaulin body (3,960 mm)
- Galvanized headboard with a tensioning mechanism for the sliding curtain
- Height adjustable by approx. 400 mm
- "EDSCHA" brand roof movable forwards on ALU roof beam profiles, bolted to front and rear walls
- 3 pairs of movable stakes in the loading area
- The superstructure is hydraulically extendable to the left and right at the rear by approx. 750 mm
- Sliding roof with upward-swinging portal beam
- Sliding tarpaulin with a 700 mm surplus in length, tensioning straps spaced approx. 600 mm
- Height of the top edge of the superstructure approx. 3,960 mm
- Operation with roof open is not permitted and will damage the tarpaulin
- Cover plates for bridging the gap between ramps and loading platform
- Electro-hydraulic power pack at rear, under the loading platform
- Holders for warning signs including socket outlets at the gooseneck and at the ramps, left and right
- Ramp control valves mounted on the trailer's right side
- 6 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading platform
- Lifting axle on the front axle
- Grating surface in the sloped part of the loading platform C40/4 (point load 3.4 t on an area of 20 x 20 cm)
- One INOX toolbox 565 x 290 x 810 mm, right side in driving direction between the axles
- Painted sand layer on checker plates on the gooseneck and loading platform as slip protection
- BEKAMAX (Pico) centralized lubrication system with NLGI-2 standard grease and removable pump guard
- Four pull-out warning panels, approx. 423 x 423 mm, extendable by approx. 400 mm, with position lamp
- Load gauge for axle load determination including load diagram
- HRM metallization (High Resistance Metallisation) of the outer frame
- Entire steel structure shot-peened, then specified visible surfaces hot finished with ZINACOR 850 metallization (Zinc 85% - Aluminium 15%)
Malý inzerát
Dortmund
933 km
Príves s plošinou a plachtou
Meusburger2-Achs-Jumbo-Tiefbett mit Planenaufbau
Zavolať
Stav: nový, pohotovostná hmotnosť: 11 000 kg, maximálna hmotnosť nákladu: 27 000 kg, celková hmotnosť: 38 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 300 mm, šírka ložného priestoru: 2 550 mm, veľkosť pneumatiky: 235/75 R17.5, farba: sivý, prevádzková hmotnosť: 11 000 kg, Výbava: ABS, Chassis:
- Welded steel frame construction with front and rear frame cranking and lowbed without rear bevel
- Gooseneck + king pin plate 225 mm
- Lowbed designed for point load of 25 t over 5 m
- Outer frame closed to the outside with welded lashing rings for securing cargo
- Interchangeable 2" king pin
- Rear hanging track for aluminum ramps
Axles and Tyres:
- BPW low loader axles, each with 10 t axle load, air bellows diameter 360 mm
- Air suspension with lifting and lowering device, lift 220 mm (-60/+160 mm)
- Wabco SmartBoard with ECAS function for 2 coupling heights + 100 mm
- S-cam brake 300/200 mm, asbestos-free brake linings
- Automatic slack adjusters
- IVTM tire pressure monitoring system
- 9 tires 235/75 R 17.5, tubeless
Steering:
- 1st and 2nd axle hydraulically forced steering via fifth wheel coupling
Floor:
- Laminated multi-layer floor, 27 mm thick, flush with outer frame and longitudinal beams
- Reinforced underneath with GRP coating
- 12 pairs of lashing rings welded into the outer frame (8 pairs RUD 8 t – 6 pairs in the lowbed as well as one pair each on the gooseneck and at the start of the rear compartment – 2 pairs each of 4 t lashing rings on the gooseneck and rear compartment)
- 6 pairs of mushroom lashing points in the outer frame lowbed
- Storage compartment with lid in the lowbed floor front left and right
Front Wall:
- 25 mm aluminum hollow profiles extended up to the lower roof edge with integrated curtain tensioning device
Curtain Sides:
- Curtains on both sides with welded-in vertical and horizontal straps (spacing approx. 600 mm) and tension locks made of stainless steel
- Adjustable curtain straps (over-center type) for loading width up to 4,000 mm including curtain extension with press studs and Velcro fastener
- Curtain extension to the driving direction: 300 mm, in height: 750 mm
- With eyelets for loose curtain extension part
- 1 pair of vertical curtain pockets approx. 1,000 mm long, positioned in the lowbed at the front cranking
- With strap pockets
Rear Wall:
- Steel tail portal frame with side curtain retaining bracket
- Aluminum double-wing door, 25 mm thick
- Both door wings fully folding with door retainers
- Each door wing with one double hinge and two recessed grip pockets
Front Corner Posts:
Njdpfxsiu Eu Ne Apzola
- At roof height, bolted to the front end
Center Posts:
- 3 pairs of infinitely adjustable folding posts
- Posts are movable along the entire length by means of rollers
- Center posts in lowbed also fixable at the rear platform
Roof:
- EDSCHA sliding roof (galvanized) with transverse bows, can be shifted in both directions (pushed together at the front in the load area)
- Rear portal crossbar can be swivelled away
- PVC tarpaulin roof without customs closure
- Manual hydraulic lifting roof on both sides, lift 450 mm
- Retractable roof can be operated in front (9x50) and rear (9x50) raised positions
- Including curtain extension and curtain tail at the rear
- Roof canopy at the very front of the front wall, each extendable by 900 mm with crank
Accessories:
- Extensible warning signs (removable at front and rear with socket), incl. position lights up to loading width of 4,000 mm
- Storage for 4 warning signs inside front wall, top right and left
- 1 aluminum ladder with holder, 2,500 mm long, at the front wall
- 2 rows of self-locking aluminum slats
- Sheet metal fenders with mud flaps
- 1 night parking sign and 1 ADR sign on the rear wall
- Central lubrication system BEKAMAX with pump and grease
Malý inzerát
Schwebheim
701 km
Nízkozdvižný príves
Müller MitteltalPT 30 3 Achs Tieflader 9,20 m Ladefläche
Zavolať
Stav: použitý, pohotovostná hmotnosť: 7 340 kg, maximálna hmotnosť nákladu: 22 660 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 05/2012, dĺžka ložného priestoru: 9 200 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75 R 17,5, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235/75 R 17,5, veľkosť zadnej pneumatiky: 235/75 R 17,5, kabína vodiča: iný, emisná trieda: žiadny, Výbava: ABS, pneumatická brzda, Dĺžka ložnej plochy cca 9 200 mm, ložná výška cca 900 mm, 16x kotviacich ôk, vozidlo sa predáva na objednávku, vyhradzujeme si právo na tlačové chyby, omyly a zmeny, ilustračné obrázky. Viac údajov na: !, More Details: !
Nlsdpfey Etpvox Apzsa
Malý inzerát
Schwebheim
701 km
Nízkozdvižný príves
Müller MitteltalT 3 3 Achs Tieflader- Anhänger
Zavolať
Stav: použitý, pohotovostná hmotnosť: 6 500 kg, maximálna hmotnosť nákladu: 23 500 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 06/2010, zavesenie: oceľ, veľkosť pneumatiky: 235 / 75 R 17,5, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235 / 75 R 17,5, veľkosť zadnej pneumatiky: 235 / 75 R 17,5, kabína vodiča: iný, emisná trieda: žiadny, palivo: biodiesel, Výbava: ABS, pneumatická brzda, Vozidlo sa predáva na zákazku zákazníka., čiastočne poškodené drevené podlahové dosky, 17 párov kotviacich ôk, výška nakladania cca 900 mm, -- technické údaje, chyby a zmeny vyhradené, ilustračné fotografie --, Viac informácií nájdete na: !, Ďalšie podrobnosti: !
Nedpfx Apoy Etl Rjzola
Malý inzerát
Senden
709 km
Chladený náves
SCHMITZ CARGOBULL3-Achs SKO24-13.40 FP 45 Cool+Lift+2.200h
Zavolať
Stav: použitý, maximálna hmotnosť nákladu: 30 443 kg, celková hmotnosť: 39 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 06/2017, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 500 mm, výška ložného priestoru: 2 700 mm, Rok výroby: 2017, Výbava: ABS, * SCHMITZ CARGOBULL
* 3-nápravový chladiarensky náves SCBS3
* SKO/24/L - 13. FP 45 COOL
* Od 1. majiteľa (DE), len cca 2.200 h naftový / 600 h elektrický chod
* SC-nápravy
* SC-chladiace zariadenie
* Vzduchové odpruženie
* Zadné portálové dvere, mierne zatlačené
* Box na palety
* Pneumatiky: 50 % (385/65 R22.5)
* Rozmery: D-13 600 Š-2 500 V-2 700 mm vnútorné
* Celková hmotnosť: 39 000 kg
* Pohotovostná hmotnosť: 8 557 kg
* Nosnosť: 30 443 kg
* Farba: biely s nápisom, podvozok čierny
* atď.
----
Predchádzajúci predaj a chyby vyhradené!
Funkčnosť doplnkov bez záruky!
Hovoríme aj: ENG / ITA / HR / SRB / BiH
Váš kontakt: Ludvig Kozuha, mobil
Nledpfxowyhzcs Apzoa
WhatsApp, Viber
Viac ako 20 rokov skúseností s obchodovaním s úžitkovými vozidlami!
- SPOĽAHLIVÝ & FAIR -
Bývalý DAF zmluvný partner!
Pečať dôvery
Predajcovia certifikovaní spoločnosťou TruckScout24

Malý inzerát
Empfingen
809 km
Úžitkové vozidlo
Schmitz Cargobull3 Achs MEGA Liftachse Hubdach SAFaxle TÜV 01 26
Zavolať
Stav: použitý, prvá registrácia: 01/2007, celková hmotnosť: 39 000 kg, pohotovostná hmotnosť: 7 450 kg, farba: strieborný, typ prevodu: iný, emisná trieda: žiadny, Rok výroby: 2006, maximálna hmotnosť nákladu: 31 550 kg, ďalšia kontrola (TÜV): 01/2026, zavesenie: vzduch, objem nakladacieho priestoru: 101 m³, dĺžka ložného priestoru: 13 620 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 3 000 mm, veľkosť pneumatiky: 455/40 R22.5, veľkosť prednej pneumatiky: 455/40 R22.5, veľkosť zadnej pneumatiky: 455/40 R22.5, kabína vodiča: iný, Výbava: ABS, elektronický stabilizačný program (ESP), hmlové svetlá, osvetlenie, pneumatická brzda, podvozok, registrácia nákladného vozidla, ďalšie svetlomety, Schmitz 3-nápravový MEGA plachtový náves SCS 24/L - 13.62 M B MEGA
* Zdvihacia náprava
* Nápravy SAF
* Pozinkovaný podvozok
* Lišty na palety
* Edscha posuvná strecha
* Posuvné plachty vľavo/vpravo
* Hydraulická zdvíhacia strecha
* 2 úložné boxy vľavo
* Zapustené kotviace oká v podlahe ložnej plochy
* Kotúčové brzdy
* ABS, EBS, ALB, LSV, CDF
* Dierovaný vonkajší rám
* Hliníkové laty (momentálne)
* Portálové dvere vzadu
* Vzduchové odpruženie (zdvíhanie/spúšťanie)
* Certifikát podľa EN 12642-XL + Daimler 9.5
* Pneumatiky: 455/40 R22.5
* Vnútorné rozmery: dĺžka 13,62 m, šírka 2,48 m, výška 3,00 m
* Hmotnosti: celk. 39.000 kg, poh. 7.450 kg, užit. 31.550 kg
* Nemecké vozidlo a nemecká dokumentácia!!
* Veľmi dobrý stav - neutrálna strieborná plachta!!
* 3. majiteľ
* Prvá evidencia: 17.01.2007
* STK platné do 01/2026
* Špeciálna prehliadka do 07/2025
* VIN: WSM000003046452
Medzipredaj, chyby a zmeny vyhradené!
Na niektorých obrázkoch sú firemné logá odstránené - prosím informujte sa!
Nljdpfx Aoyct Rgspzsa
Funkčnosť doplnkov bez záruky!
Kontaktná osoba:
Christoph Ott
Tel. + WhatsApp:
Malý inzerát
Schwebheim
701 km
Nízkozdvižný príves
Müller MitteltalT 3 3 Achs Tieflader- Anhänger
Zavolať
Stav: použitý, pohotovostná hmotnosť: 6 500 kg, maximálna hmotnosť nákladu: 23 500 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 06/2010, zavesenie: oceľ, veľkosť pneumatiky: 235 / 75 R 17,5, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235 / 75 R 17,5, veľkosť zadnej pneumatiky: 235 / 75 R 17,5, kabína vodiča: iný, emisná trieda: žiadny, palivo: biodiesel, Výbava: ABS, pneumatická brzda, Vozidlo sa predáva na zákazku zákazníka., čiastočne poškodené drevené podlahové dosky, 17 párov kotviacich ôk, výška nakladania cca 900 mm, -- technické údaje, chyby a zmeny vyhradené, ilustračné fotografie --, Viac informácií nájdete na: !, Ďalšie podrobnosti: !
Nlsdpfx Apjyy I U Nezja
Malý inzerát
Schwebheim
701 km
Nízkozdvižný príves
Müller MitteltalPT 30 3 Achs Tieflader 9,20 m Ladefläche
Zavolať
Stav: použitý, pohotovostná hmotnosť: 7 340 kg, maximálna hmotnosť nákladu: 22 660 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 05/2012, dĺžka ložného priestoru: 9 200 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75 R 17,5, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235/75 R 17,5, veľkosť zadnej pneumatiky: 235/75 R 17,5, kabína vodiča: iný, emisná trieda: žiadny, Výbava: ABS, pneumatická brzda, Dĺžka ložnej plochy cca 9 200 mm, ložná výška cca 900 mm, 16x kotviacich ôk, vozidlo sa predáva na objednávku, vyhradzujeme si právo na tlačové chyby, omyly a zmeny, ilustračné obrázky. Viac údajov na: !, More Details: !
Nledeyy I U Ajpfx Apzja
Malý inzerát
Empfingen
809 km
Úžitkové vozidlo
Schmitz Cargobull3 Achs MEGA VARIOS Hubdach verzinkt schönePlanen
Zavolať
Stav: použitý, prvá registrácia: 06/2008, celková hmotnosť: 39 000 kg, pohotovostná hmotnosť: 7 286 kg, farba: strieborný, typ prevodu: iný, emisná trieda: žiadny, maximálna hmotnosť nákladu: 31 714 kg, ďalšia kontrola (TÜV): 06/2025, zavesenie: vzduch, objem nakladacieho priestoru: 101 m³, dĺžka ložného priestoru: 13 620 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 3 000 mm, veľkosť pneumatiky: 455/40 R22.5, veľkosť prednej pneumatiky: 455/40 R22.5, veľkosť zadnej pneumatiky: 455/40 R22.5, kabína vodiča: iný, Výbava: ABS, elektronický stabilizačný program (ESP), hmlové svetlá, osvetlenie, pneumatická brzda, podvozok, registrácia nákladného vozidla, ďalšie svetlomety, Schmitz 3-Axle MEGA – Varios – Curtainsider SCS 24/L – 13.62 m B MEGA
* Galvanized chassis
* Pallet stop bars
* Edscha sliding roof
* Sliding curtains left/right
* Schmitz axles
* Lift roof
* 2 large toolboxes on the left
* Recessed lashing rings in the loading floor
* Disc brakes
* ABS, EBS, ALB, LSV, CDF
* Perforated external frame
* ALU slats currently installed
* Rear portal doors
* Air suspension (raising/lowering)
* Certificate according to EN 12642-XL + Daimler 9.5
* Tires: 455/40 R19.5
* Internal dimensions: L- 13.62 m, W- 2.48 m, H- 3.00 m
* Weights: Gross weight- 39,000 kg, Curb weight- 7,286 kg, Payload- 31,714 kg
* German vehicle and German documents!
* Good tires + clean and neutral tarp!
* 3rd owner!
* First registration: 10.06.2008
* Technical inspection (TÜV) valid until 06/2025
* Safety inspection (SP) valid until 12/2025
Nljdeyidhyopfx Apzsa
* VIN: WSM000003110478
Subject to prior sale, errors, and changes!
Some company logos may have been removed from the images – please inquire!
No guarantee for the function of optional extras!
Your contact:
Christoph Ott
Tel. + WhatsApp:
Uľahčujeme vám vyhľadávanie: "3 achs 3 achs jumbo- pritschenanhänger mit steckrungen"
Okamžite a bezplatne dostanete nové ponuky e-mailom.
Vyhľadávaciu úlohu môžete kedykoľvek jednoducho ukončiť.

Informujte sa teraz
+49 201 858 95 507
+49 201 858 95 507
Vložiť inzerát teraz
*za inzerát/mesiac


















































































































































































































































































































































