Príves

MÜLLER-MITTELTAL 3-achs Plateu Anhänger, mit 3 Kabelböcken

Stav: nový, maximálna hmotnosť nákladu: 18 000 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 230 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2026, * TP 30.0 with 3 cable reel supports ----Brake system: * Wabco TEBS (electronic braking system) * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lifting and lowering device ----Drawbar: * Drawbar, 1,800 mm long, with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option in truck display via EBS signal (no truck-side installation required) * 15-pin power connector * 2 additional LED reversing spotlights (activated via reverse gear) * LED lighting ----General fittings: * Aluminum air tank * Stainless steel toolbox, approx. 1,000 x 300 x 600 mm, mounted laterally * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Platform: * Zurr-fix outer frame, angled at 45°, with hole pattern for lashing points, lashing capacity per point 2,000 kg at a spacing of 480 mm * Installation of 3,000 kg drop lashing brackets at approx. 600 mm intervals possible – delivery includes 12 pieces of 3,000 kg lashing brackets per side * Each side features 5 pockets for stanchions (100 x 50 mm) in the outer frame – stanchions are not included in delivery * 30 mm phenolic plywood floor ----Cable drum supports: * 3 galvanized cable drum supports secured via container locks with side forklift pockets (center/center: 800 mm, pocket width: 185 mm) * Maximum drum diameter: 2,600 mm, maximum drum width: 1,650 mm * Clear width between bearing arms approx. 1,775 mm, with cross brace * Drum weight per support: 6,000 kg * Without drive and drum brake * Support arm with tension lock for securing drum shaft * Steel drum shaft, 76 mm diameter, with centering and rotatable ends * 2 retaining rings * 2 centering cones made of polyamide * 4 pieces of 3.2 t lashing eyes on the bearing arms for customer securing of the drum against rotation and unrolling ----Loading height: Ljdpex Nlkgsfx Afmjak * Approx. 1,040 mm loaded ----Paintwork: * Chassis, bogie, drawbar, outer frame, and rear underrun protection hot-dip galvanized * Axles painted in a shade of black ----Information: * Technical GVW upgrade to 30 t possible * New vehicle with manufacturer warranty * Subject to errors and prior sale * Immediately available ex stock Egestorf

Stav: nový, maximálna hmotnosť nákladu: 18 000 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 230 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2026, * TP 30.0 with 3 cable drums ----Brake System: * Wabco TEBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axle: Lajdpfx Afex Nli Nsmsk * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lift and lower device ----Drawbar: * Drawbar, 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck dashboard via EBS signal (no truck-side installation required) * 15-pin power connector * 2 additional LED reversing lights (controlled by reverse gear) * LED lighting ----General Attachments: * Aluminum air reservoir * Stainless steel side toolbox approx. 1,000 x 300 x 600 mm * Side collision protection * Plastic quarter mudguards * Underride guard ----Flatbed/Superstructure: * Zurr-fix external frame, 45° bent with hole pattern for lashings, lashing capacity per point 2,000 kg at 480 mm intervals * Option to install 3,000 kg drop lashing brackets at approx. 600 mm intervals (the scope of delivery includes 12 pcs. of 3,000 kg lashing brackets on each side) * 5 pockets for pipe stakes (100 x 50 mm) on each side in the outer frame (stakes not included) * 30 mm phenolic plywood flooring ----Drum Supports: * 3 galvanized drum supports secured via container locks, with side forklift pockets 800 mm center/center (pocket width 185 mm) * Max. drum diameter 2,600 mm and max. drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with cross brace * Drum weight per support: 6,000 kg * Without drive and drum brake * Support arm with locking fastener for drum shaft securing * Steel drum shaft, 76 mm diameter, with centering and rotatable ends * 2 locating rings * 2 centering cones made of polyamide * 4 pcs. 3.2 t lashing eyes on the support arms for customer-side securing of the drum against rotation and unwinding ----Loading Height: * Loaded approx. 1,040 mm ----Paintwork: * Chassis, bogie, drawbar, outer frame, underride guard hot dip galvanized * Axles painted in black ----Information: * Technical gross vehicle weight up to 30 t possible * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Immediately available ex Egestorf