Nízkopodlažný náves

FAYMONVILLE Multimax Satteltieflader (1+2) - nachlaufgelenkt

Excerpt of Equipment SWAN NECK Swan neck in SNT design for optimizing platform length, length approx. 3,700 mm, rear with bevel, approx. 1,000 mm x 10°. Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4. - Detachable steel front wall, approx. 400 mm high - ASPÖCK-UNIBOX - 3 kW electro-hydraulic power unit for hydraulic operations, except for hydraulic cable winches. - Approx. 40 mm thick hardwood flooring above the swan neck. - 2-inch king pin - Guide plate for the fifth wheel, approx. 500 mm wide, on the swan neck. - Mount at the rear of the swan neck for ALU loading ramps. - Round NATO socket at the front connection bar (Maeler & Kaege VG 96 917) - 4 wheel chocks with holder in front of the front wall. - 1 pair of stake pockets embedded in the swan neck for stakes approx. 100 x 50 mm (inside on chassis beam) LOADING PLATFORM Platform length approx. 8,800 mm, in extendable design approx. 4,100 mm, with rear bevel approx. 500 mm x 10°. A recess in the platform and into the bevel for accommodating the excavator bucket stick, approx. 2,490 x 750 x 210/290 mm (L x W x H). Pneumatic locking with conical locking bolt and reinforced locking positions, supply lines routed protected in the telescopic beams and automatically adjust to the loading platform length. - TPMS tire pressure monitoring system according to ECE R 141. - BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle self-steering. - 3rd axle with electro-magnetic reverse lock, activated via reverse gear and manually. Technical axle load: 12,000 kg each - Air suspension with lift and lower valve. - 235/75 R 17.5 3PMSF twin tires. Brand of our choice - Mechanical landing legs with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg - Continuous hardwood flooring, approx. 50 mm thick, on loading area, interrupted between axles (increases friction coefficient). - 1 intermediate table, approx. 300 mm wide, for the extension tube with a large cross-section. Intermediate table with offset loading platform and extendable hook-in bars for aluminum bridging elements. - Platform locking with conically welded locking profiles every approx. 250 mm, including pre-tension plate. - 1 pair of lashing rings on the front crossmember (LC 10,000 daN). - 9 pairs of recessed lashing rings in the outer frame of the platform, foldable outward (LC 10,000 daN). - 1 pair of fixed wheel recesses in front of the axles, open up to the crossmember of the swan neck, approx. 700 x 410 mm (W x D). Wheel recesses with square climbing strips approx. 15 x 15 mm and extensions in the lower area (if the vehicle is equipped with extendable widenings). - 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the loading platform between the 1st and 2nd axle. Wheel recesses with square climbing strips approx. 15 x 15 mm and extensions in the lower area - Aluminum covers for the wheel recesses in front of the axles and between the 1st and 2nd axle, which can also be used as widening planks (if the vehicle is equipped with extendable widenings). Aluminum elements lockable on the extension tubes of the widenings. - 1 pair of mechanical rear supports. - 1st axle with traction aid. - Painted anti-slip sand coating on the outer frame of the platform and on the checker plates.
Giodpfx Aboy Auh Isler

Inzerát bol automaticky preložený. Chyby v preklade sú možné.