Otvorený náves s plachtou

Krone SDP 27 eLB4-CS Heckverbreiterung

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, číslo stroja/vozidla: VAVJS1339PH522406, pohotovostná hmotnosť: 8 520 kg, maximálna hmotnosť nákladu: 30 480 kg, celková hmotnosť: 39 000 kg, prvá registrácia: 01/2024, dĺžka ložného priestoru: 13 500 mm, zavesenie: vzduch, veľkosť pneumatiky: 385/55 R22.5, farba: žltá, Rok výroby: 2024, Výbava: ABS, LOCATION: 73230 Kirchheim unter Teck - 3-AXLE CONSTRUCTION MATERIAL FLATBED SEMITRAILER RH230 – forced steering Vehicle ID No.: VAVJS1339PH522406 Mileage: 7,700 km - Weights Gross weight (technical): 39 t Axle unit weight (technical): 27 t Fifth wheel load (technical): 12 t DIMENSIONS Internal length approx. 13,500 mm Internal width approx. 2,480 mm Total width max. 2,550 mm Chodpfxoxq S H Ie Ahuoa Loading height front approx. 230 mm above ASH = approx. 1,360 mm Fifth wheel height unladen approx. 1,130 mm CHASSIS - Welded steel frame construction - Reinforced for 20 t load at the center across 4 m loading length - Frame height at front approx. 230 mm - Interchangeable 2" king pin - Frame designed for fifth wheel height unladen approx. 1,120 mm – 1,200 mm (with air-suspended tractor unit) - Outer frame with 4 mm perforated strip, hole center spacing approx. 100 mm, long hole 50/30 mm, for lashing points rated at 3.5 t each - 10 pairs of 5 t folding lashing rings, recessed into the floor, can be folded up and outward - 8 pairs of square tube inserts with sockets for 80x80 mm stanchions, on both sides of the outer frame - 6 crosswise square tube inserts with sockets for 80x80 mm stanchions across the full width, max. tensile force 2000 daN AXLES - BPW EcoDisc axles with disc brakes Ø430 mm (22.5" disc) - Load capacity 9 t/axle, on-road version - 1st axle rigid - 2nd and 3rd axles with bogie mount for forced steering STEERING - Forced steering "Tridec TR" on two turntable-steered axles for heavy-duty use - Automatic forced steering, front saddle turntable with steering wedge - Transmission via two steering rods, rear axle installation with bogie - Central lubrication points for steering on the front saddle turntable and on the rear bogie - Axle lift on first axle, lifts and lowers automatically depending on load, starting assist with speed limitation BRAKING SYSTEM / SUSPENSION - EBS system 2S2M, one axle sensor-equipped - RSS/RSP – Stability program - Spring actuator parking brake on 2 axles - Aluminium air tanks - Brake/air connections with Quattromatic quick couplings - EBS/ABS socket in front - Air suspension with lift and lower device, total lift approx. 200 mm - Automatic adjustment to programmed ride height from 15 km/h ASSISTANCE / SAFETY SYSTEMS - Axle load display via EBS CAN bus signal for display in the driver's cab - Wabco SmartBoard for reading data via display (mileage, axle unit load, brake diagnostics, etc.) FLOOR - 27 mm screen-printed plywood floor with steel hat-profile stringers over the longitudinal beams - Floor load capacity 7,200 kg forklift axle load ACCESSORIES / GENERAL - Aluminium forklift protection strip bolted to both sides of the outer frame - Aluminium forklift protection strip, rear crosswise - Closed special steel tool box by Schoch, black-coated approx. 3,340 mm long, approx. 2,480 mm wide, approx. 500 mm high, loadable up to approx. 1 t, asymmetrical with doors on both sides - Galvanised steel tool box / lid painted single-color - 8 plug-in hardwood crossbeams approx. 100/100 mm, steel-edged, fixable in the outer frame sockets Very good condition, German registration documents, immediately available.

Stav: nový, pohotovostná hmotnosť: 6 350 kg, maximálna hmotnosť nákladu: 38 650 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 540 mm, zavesenie: vzduch, veľkosť pneumatiky: 385/65 R22,5, Výbava: ABS, Loading Area: - 2 pairs of folding lashing rings on the outside (LC 5,000 daN) Chodpjiu Etkefx Ahuja - 24 pairs of cut-outs in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN) Landing Legs: - JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: - BPW axles, air-suspended, with disc brakes (430 mm), equipped with lifting/lowering function - Tyres: 385/65 R 22.5 Brake System: - WABCO brake system according to EU regulations with EBS-E (2S2M) Paintwork: - First-class and long-lasting corrosion protection of the standard shot-blasted welded frame is ensured by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) single-colour top coat in MB 7350 Nova Grey - Rear section metallised and painted in RAL 9010 (Pure White) - Metallic paint finish not possible Steel Construction: - Steel construction made of high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (Yield strength 355MPa) - S690QL/S700MC (Yield strength 690MPa) Electrical System: - Electrical system according to EU regulations - 24 Volt lighting - ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front connection rail with sockets 24N, 24S & 15-pin - Connection in accordance with ISO. - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Accessories Included: - Yellow-red air couplings mounted on the galvanised connection rail at the front - 4 wheel chocks with holders - 2" king pin - Galvanised steel front wall approx. 1,600 mm high, EN12642-XL - White reflective tape according to EU regulations on the sides and red on the rear of the semi-trailer - European reflective panels (red-yellow) on the rear of the trailer - Loading platform with approx. 30 mm thick hardwood floor set in omega profiles - 10 pairs of stake pockets for plug-in stanchions 100 x 50 mm on the outer frame of the loading area - 3 pairs of cross-rails for stake pockets for plug-in stanchions 100 x 50 mm, mounted transversely on the loading deck - Storage tray for 1,000 mm plug-in stanchions, at rear in the central beam - 1 spare wheel holder under the loading platform on the right-hand side (in direction of travel) - 1 mudflap at the rear of the trailer - Manual and documentation on USB stick - 1 bracket for a rotating beacon at the rear of the trailer - On the gooseneck and rear panel, left and right, a bracket for warning signs including socket - 6 pairs of WADER container locks on the loading platform for 1x 20ft, 2x 20ft, or 1x 40ft container, flush with rear - 80 km/h speed stickers at the rear and on both sides - Four warning boards, extendable by approx. 400 mm, approx. 423 x 423 mm, with an LED position light - Load pressure gauge for axle load determination including load diagram - HRM metallisation (High Resistance Metallisation) of the outer frame - Complete steel construction shot-blasted, followed by metallisation with ZINACOR 850 (Zinc 85% - Alu 15%) on the defined visible surfaces

Stav: nový, maximálna hmotnosť nákladu: 25 300 kg, celková hmotnosť: 38 000 kg, konfigurácia náprav: 2 nápravy, celková šírka: 2 540 mm, Výbava: ABS, You can find our complete stock of vehicles, including those available immediately or at short notice, on our website. Selection of equipment. Full equipment details available upon request. Gooseneck * Gooseneck in SNT design to optimize loading platform length * Length approx. 3,750 mm, hydraulically liftable/lowerable and detachable gooseneck * Technical fifth wheel load: 25,000 kg. Suitable for tractors: 4 x 2 and 6 x 2 Beam Deck * Lowbed designed as an extendable vessel bridge in SUPER LOW design * Length approx. 6,850 mm * With mechanical locking * Supply lines are protected within the extendable beams and automatically adjust to the respective lowbed length Rear Chassis * Short version with closed outer frame and checker plate covering * Chassis includes an excavator trough, which is closed at the rear half to accommodate the air tanks Axles * BPW axles and suspension, all axles hydro-mechanically forced steered * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve Cedpfx Ajv Sw E Aehujha Tyres * GOODYEAR KMAX T 3PMSF (M+S) 245/70 R 17.5 twin tyres. Load index 143/141J (146/146F) Braking System * Brand: WABCO, EBS-E according to EU regulations, WITHOUT connecting cable to the tractor unit Paintwork * 6-stage final treatment * Complete steel structure shot-blasted after welding * 1 coat of zinc primer * 1 coat of adhesion primer. Final paint with 2 coats of 2-pack (acrylic) paint in a single color, followed by cavity sealing with special wax Trailer Color * RAL 3002 Carmine red * Rim color: Silver grey * Side wall color: Natural aluminum Included Accessories * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit to control hydraulic operations, except for hydraulic winches. Without installation of supply connections on the tractor * Mounting adapter for 1 spare wheel in front of the gooseneck's front wall * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings. The first hole approx. 200 mm from the front, then approx. every 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring each left and right on the rear bevel of the gooseneck (LC 6,000 daN) * 2" king pin * Hydraulic crossbeam to support the gooseneck on the tractor unit or a dolly * Air connection with air gun on the gooseneck * 1 pair of steel ramps with climbing profiles and locking bolts to bridge the lowbed's hooks * 1 lashing ring each left and right on the front cross member (LC 10,000 daN) * On the outer beams of the loading platform, preparation for removable floor panels * Lashing rings with retaining spring approx. every 1,200–1,300 mm outside on the inner beams of the platform * Lashing rings with retaining spring approx. every 1,200–1,300 mm outside on the outer beams of the loading platform (LC 10,000 daN) * Cut-outs on the top flange of the outer beams above the lashing rings * Mechanical pin-tab coupling from lowbed to chassis for exchangeable loading platform or installation of extension beams. Includes electro-pneumatic-hydraulic couplings * Outer beams of the lowbed coated with non-slip sand layer * 2nd driving height for upper drive position, max. ±50 mm from normal driving position, without controls installed on the tractor * 1 pair of lashing rings with retaining spring at the transition from the lowbed to the excavator trough (LC 10,000 daN) * Bevel front and rear a

Stav: nový, maximálna hmotnosť nákladu: 34 600 kg, celková hmotnosť: 49 000 kg, konfigurácia náprav: 2 nápravy, Rok výroby: 2025, EuroCompact FL 02 Nízky náves s dvojitým teleskopom a kyvadlovými nápravami Hmotnosti Rýchlosť 80 km/h Sedadlové zaťaženie 25 000 kg Zaťaženie náprav 2 x 12 000 kg Povolená celková hmotnosť 49 000 kg Vlastná hmotnosť cca 14 400 kg Užitočné zaťaženie 34 600 kg Labutí krk Dĺžka x šírka 3 700 mm x 2 480 mm Výška sedla (naložené) 1 300 mm Polomer otáčania vpredu / vzadu 1 350 mm / 2 250 mm Královský čap, sedadlové zaťaženie 25 000 kg Nízky náves 2x dvojito teleskopický Dĺžka x šírka 6 620 mm + 5 050 mm + 5 330 mm x 2 550 mm rozšíriteľný na 3 000 mm teleskopicky roztiahnuteľný o 5 050 mm + 5 330 mm na 17 000 mm v lôžku Stavebná výška 260 mm Nakladacia výška naložené cca 360 mm pri svetlej výške 100 mm Codpox Nupxsfx Ahusha Podvozok zadný 2-nápravový Rázvor 1 360 mm Jednotlivé pneumatiky 245/70 R 17,5 s kyvadlovými nápravami Gigant 12-14 t zaťaženie na nápravu Riadenie nútené Vanička na rýpadlo vzadu v podvozku Dĺžka podvozku 2 700 mm Rádiové diaľkové ovládanie všetkých funkcií Centrálne mazanie Elektroagregát Najazdové kliny Uchyty na kontajner v nízkom ráme Rozširovania

Stav: použitý, Funkcionalita: plne funkčný, pohotovostná hmotnosť: 9 000 kg, maximálna hmotnosť nákladu: 29 000 kg, celková hmotnosť: 38 000 kg, prvá registrácia: 08/2020, farba: červená, Rok výroby: 2020, ES-GE 2-axle lowbed trailer, non-extendable, Tridec steering system Gross weight: 38,000 kg Axle load (2 x 10,000 kg): 20,000 kg Fifth wheel load: 18,000 kg Cjdou U Np Tjpfx Ahusha Unladen weight +/- manufacturer tolerance: approx. 9,000 kg Payload: approx. 29,000 kg Total length: approx. 13,650 mm Overall width: approx. 2,540 mm Loading platform length: approx. 13,200 mm Loading platform width: approx. 2,540 mm Front overhang: approx. 1,200 mm Front radius: approx. 1,750 mm Swing clearance (tractor): approx. 2,100 mm Fifth wheel height: approx. 1,150 mm B dimension: approx. 12,000 mm Raised bed length: approx. 3,700 mm Loading height raised bed: approx. 1,480 mm Lowbed length: approx. 6,500 mm Lowbed loading height: approx. 250 mm Lowbed ground clearance: approx. 100 mm Loading height above axle unit: approx. 3,000 mm Tractor unit data: A dimension: approx. 4,500 mm Fifth wheel height: approx. 1,150 mm Swing clearance: approx. 2,100 mm Chassis: - Made from high-grade fine-grained steel - Lowbed in rigid design - Axle unit non-detachable - Without excavator arm recess Kingpin: - 2'' kingpin Landing gear: - Without front landing legs Axles: - 2 x 10,000 kg axles (17.5"), technical 12,000 kg each - Gigant brand - Closed drum brakes. Asbestos-free brake linings - Automatic slack adjusters. Central alignment - Axle spacing approx. 1,360 mm Suspension: - Air suspension with raise/lower function - 2nd driving height for air suspension (+ approx. 30 mm) Steering: - Hydraulic axle steering - All axles steered. "Tridec" brand Tyres: - 9 tyres, 245/70 R 17.5, load index 146/146 F - Continental tyres - Steel rims Brakes: - Dual-line air brake system per EC directive, "Knorr" brand - Automatic load-dependent brake force regulator - Controlled via standard red/yellow air couplings in accordance with ISO 1726 - Electronic brake system, "EBS", 7-pin socket as per ISO 7638, fitted at front, according to EU regulations. With ABS 4S/2M - With RSS (Roll Stability Support) - Spring-actuated parking brake - 4 wheel chocks with holders - Without flexible hoses (Wendeflex) to the tractor unit - Aluminium air tanks - TIMG2 (Trailer Information Module) installed for current axle load display Underrun protection: - Integrated into rear end plate Side frame: - Side frame made of UNP steel approx. 200 mm Load securing: - 13 lashing points per side with 13,400 kg traction, foldable outwards, mounted on the outer frame - 1 pair of lashing rings with approx. 13,400 kg lashing capacity at the rear of the gooseneck, approx. 400 mm from the floor - 1 pair of lashing rings with approx. 13,400 kg traction at lowbed rear upright section - 7 stake pockets per side on the inside of the outer frame, for stakes approx. 80x50x4 mm, evenly distributed along the full length of the load platform - 6 stake pockets per side welded externally to the main frame Floor: - Approx. 28 mm hardwood flooring with Omega profiles, laid between the main beams - Tread plate (approx. 8/10 mm) above the axle unit Front wall: - Designed as a storage box with lid, approx. D 400 x H 450 mm, extending the full width of the loading platform, corners chamfered Sideboards: - 3 removable anodized sideboards on gooseneck, approx. 2,440 x 400 mm - Removable, galvanized stakes at rear Galvanization: - All steel parts shot blasted - Spray-galvanized chassis Paintwork: - Primed and single-color painted in RAL 3002 signal red - Axles, landing gears KTL-coated, black. Wheels silver

Stav: nový, Funkcionalita: plne funkčný, číslo stroja/vozidla: Produktpalette, pohotovostná hmotnosť: 7 200 kg, maximálna hmotnosť nákladu: 27 800 kg, celková hmotnosť: 35 000 kg, konfigurácia náprav: 3 nápravy, celková dĺžka: 13 850 mm, celková šírka: 2 550 mm, zavesenie: vzduch, veľkosť pneumatiky: 385/65 R22,5", stav pneumatík: 100 percento, Custom Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis: Semi-Trailer for Freight Forwarders Fine-grain steel welded construction in lightweight design, kingpin plate with replaceable 2" kingpin, main frame reinforcement for 25 t at the center of gravity over 3 m loading length in the retracted state. 13 pairs of welded hooks on the cross members for lashing straps 23 pairs of recessed lashing rings in the outer frame, each rated for 3.5 t Outer frame with load-lock profile for securing lashing straps Note! Not usable with side walls! 24 t two-speed landing gear, reinforced version for loaded drop-off, single-side operation Chocks with holder Aluminum side underrun protection Rear underrun protection Chjdpfxsi Ri Szs Ahuea Half-shell mudguards with anti-spray mud flaps according to EU standards 1 spare wheel holder for 1 spare wheel, including wheel fixing kit 1 closed stake storage box, open at the top, mounted under the loading platform, doors on both sides, w=450 mm / h=400/420 mm / d=2460 mm 6 pairs of extendable stake pockets for square tube stakes 80x80 mm, extendable from a load width of 2000 mm to 3100 mm 4 pairs of stake pockets recessed in the outer frame for square tube stakes 80x80 mm 11 central stake pockets recessed in the floor for square tube stakes 80x80 mm, with reinforcement bars, fitted between the external stake pockets 5 x 3 pairs of stake pockets recessed on the outer longitudinal beams, for 80x80 mm square tube stakes, including reinforcement bars—for load securing at the front and rear for construction steel mesh transport 2x5000 mm or 2x6000 mm 6 lightweight plug-in stakes B=80/T=80 mm, usable height approx. 1850 mm, hot-dip galvanized, upper end equipped with rope guides for strap tensioning 12 lightweight plug-in stakes B=80/T=80 mm, usable height approx. 1850 mm, hot-dip galvanized, with lashing eyes welded on both lower sides Note: Stake pockets/plug-in stakes are not designed for exclusively securing long items, pipes, etc. without additional wrapping/securing. 2 plastic toolboxes, with drawer and shelf, w=650/h=520/d=670 mm, lockable with padlock (padlock not included) 6 construction steel winches with wire rope and counter hook, cable runs through the outer frame, 1 removable plug-in gearbox for steel winches supplied loose Telescoping: Main frame telescopic Extendable by max. 4,000 mm and can be locked approx. every 500 mm Locking via pneumatic bolt mechanism + frame locking display on both sides; operated via hand button; controls for brake/locking and suspension on the left side in front of the axles Storage compartment between longitudinal beams when extended Axles + Suspension: SAF disc brake axles with 430 mm disc diameter Last axle with self-steering function, equipped with automatic reverse lock via reversing light and additional locking function on the trailer via hand button or manually by switch in the tractor unit (Pin 10), without truck installation Axle spacing offset mm Air suspension 1st axle automatic lift axle, additionally electrically operated from the truck, with traction aid Brake System: Two-line compressed air brake system Color-coded line routing for easy service Spring-loaded parking brake 2 interchangeable coupling heads at the front EBS system according to manufacturer’s choice, electronic braking system with EBS socket at the front

Stav: nový, Funkcionalita: plne funkčný, číslo stroja/vozidla: Produktpalette, pohotovostná hmotnosť: 6 100 kg, maximálna hmotnosť nákladu: 28 900 kg, celková hmotnosť: 35 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 650 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 3 000 mm, celková dĺžka: 13 850 mm, celková šírka: 2 550 mm, celková výška: 1 060 mm, zavesenie: vzduch, veľkosť pneumatiky: 435/50 r19.5, stav pneumatík: 100 percento, Ďalšie informácie Jemnozrnná oceľová zváraná konštrukcia, + predpätie s ľahkým napružením v oblasti krku, sedlová platňa + vymeniteľný 2-hrazdový kráľovský čap, vonkajší rám mierne šikmý, nová verzia s profilom Load-Lock na zavesenie upevňovacích popruhov, 24 t 2-stupňový podperný navijak, ovládanie z jednej strany, s rovným spodkom, bez vyrovnávania posunu. Poznámka: Voľná veľkosť oporných nôh resp. voľný zadný výkyvný rádius cca 1930 mm, výsuvný rebrík vzadu, bočný držiak dverí, 2 kliny s držiakom, bočný doraz z hliníka, podjazdová ochrana pozinkovaná oceľ, čiastočné blatníky pred prvou a za každou nápravou, protisprejové zástierky podľa EG, nárazník vzadu. SAF nápravy s kotúčovými brzdami, laserové meranie podvozku/kolies pre zníženie opotrebenia pneumatík a spotreby paliva, vzduchové odpruženie 2-vedenie tlakovej vzduchovej brzdovej sústavy, farebné rozvody pre ľahšiu údržbu, parkovacia brzda s pružinovým napínaním, 2 zamieňacie spojovacie hlavy vpredu, bez prepojovacieho vedenia, EBS, elektronický brzdový systém s EBS zásuvkou vpredu, bez prepojovacieho kábla, Pozor: Príves smie byť ťahaný len vozidlom, ktoré zabezpečuje funkčnosť ABS!, s ventilom na zdvíhanie a spúšťanie, systém stability vozidla. 435/50R19.5 výrobca podľa výberu, oceľové disky, továrenská strieborná farba. 24 voltov, viackomorové svetlá, bočné žlté LED osvetlenie, 2 predné biele pozičné svetlá, 2 zadné bielo-červené svetlá na udržiavanie jazdného pruhu, 2 x 7-pinové vymeniteľné zásuvky vpredu, bez prepojovacieho kábla Podlaha: 30 mm preglejka, pozdĺžne nosníky pre vysoké bodové zaťaženie náprav vysokozdvižného vozíka do 7100 kg Čelné steny/rohové stĺpy vpredu: výška 2580 mm, oceľové rohové stĺpy vo volumetrickom vyhotovení, zariadenie na uvoľnenie bočnej plachty na čelnej stene, Crash Blocker, dole vo vnútri cca 140 mm vysoká oceľová nárazová ochrana Stredné stĺpy: 3 páry posuvných stĺpov po celej dĺžke, so 4-násobnými vkladacími kapsami a dole s dlhým vreckom, 3 páry polôh stĺpov Vkladacie latky: 5 radov drevených lát Zadná stena / rohové stĺpy vzadu: oceľové zadné rohové stĺpy až po spodný okraj strechy, nosník pre plachtu s okrúhlou rúrkou a napínacou račňou, zadné portálové dvere, dvojkrídlové, každé s 2 vnútornými pákovými západkami Plachta: plachta so zvarenými horizontálnymi a vertikálnymi pásmi, napínacie uzávery z nehrdzavejúcej ocele Strecha: posuvná strecha, zadný koniec sklápací, prekrytie možné posúvať zozadu dopredu, L-profil strechy pre automobilový priemysel, vnútorná šírka medzi strešnými profilmi cca 2490 mm, farba plachty biela, 400 Roof non-elastic, pri nakladaní a vykladaní minimálne prehnutie strešného nosníka, optimálna dažďová lišta vzadu hore na zadnej výstuhe nad dverami, EcoLift – zdvíhacia strecha zvýšiteľná cca o 380 mm s plynovými vzperami, 3 polohy vpredu: vnútorná výška cca 2900 mm / 2950 mm / 3000 mm, nastavené na cca 3000 mm Nemecko, skúšobné schválenie podľa EG 2007/46, 24/7 servisná linka, certifikát Fliegl o pevnosti nadstavby podľa EN 12642 XL, pripravené na jednořadový držiak značiek, výstražná tabuľa podľa ECE – 70, reflexné pruhy: biele, súvislé dole po bokoch plachty a hore v rohoch (pri viditeľných bočných stenách dole na bočných stenách), reflexné pruhy: červené po obvode zadného portálu. Rám DB 7350 novograu, 10 rokov záruka proti prehrdzaveniu, oporné nohy čierne lakované, predné rohové stĺpy žiarovo pozinkované, čelná stena hliník, zadné rohové stĺpy žiarovo pozinkované, zadná stena biela, plachta RAL podľa p Chsdpfx Asi Ri E Hshuea

Stav: použitý, pohotovostná hmotnosť: 3 140 kg, maximálna hmotnosť nákladu: 4 360 kg, prvá registrácia: 09/2019, ďalšia kontrola (TÜV): 10/2025, celková dĺžka: 7 500 mm, celková šírka: 25 500 mm, celková výška: 38 000 mm, zavesenie: vzduch, veľkosť pneumatiky: 205 / 65 R 17.5 / 10mm, veľkosť prednej pneumatiky: 205 / 65 R 17.5 / 10mm, prevádzková hmotnosť: 7 500 kg,

Stav: použitý, pohotovostná hmotnosť: 9 050 kg, maximálna hmotnosť nákladu: 29 450 kg, celková hmotnosť: 38 500 kg, prvá registrácia: 10/2006, ďalšia kontrola (TÜV): 12/2023, zavesenie: vzduch, veľkosť pneumatiky: 385/65R22.5, farba: sivý, typ prevodu: iný, veľkosť prednej pneumatiky: 385/65R22.5, veľkosť zadnej pneumatiky: 385/65R22.5, kabína vodiča: iný, emisná trieda: žiadny, Výbava: ABS, pneumatická brzda, Registration service, General and Safety Inspection (HU/SP/UVV), transport to the port Languages: German, Russian, English, Arabic Base color: grey Equipment extras: ABS, air brakes, EBS, air suspension, suspension: air, payload (kg): 29,450 Body type: tilt loader, hydraulic, ready for operation, HSN/TSN: Csdpfjww Dqusx Ahuoha Video available, own hydraulics 24V (NATO plug) ?si=PIao7Ht7GaZws7-i Errors excepted.

Stav: použitý, Funkcionalita: plne funkčný, číslo stroja/vozidla: WFDFLT33902024321, pohotovostná hmotnosť: 5 765 kg, maximálna hmotnosť nákladu: 29 235 kg, celková hmotnosť: 35 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 10/2018, dĺžka ložného priestoru: 13 650 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 2 470 mm, celková dĺžka: 13 850 mm, celková šírka: 2 550 mm, celková výška: 4 000 mm, zavesenie: vzduch, veľkosť pneumatiky: 385/65 R22.5", stav pneumatík: 100 percento, farba: čierny, Fotografie sú ilustračné, vozidlo môže byť ešte v prevádzke! Codowk Dk Ijpfx Ahueha Výbava na požiadanie!