Nízkopodlažný náves

FAYMONVILLE STZ-6WAA 2 fach Tele 32.9 m

Stav: nový, pohotovostná hmotnosť: 22 700 kg, maximálna hmotnosť nákladu: 79 300 kg, celková hmotnosť: 102 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 11 000 mm, šírka ložného priestoru: 2 850 mm, výška ložného priestoru: 920 mm, veľkosť pneumatiky: 245/70 R 17.5, farba: sivý, prevádzková hmotnosť: 22 700 kg, Výbava: ABS, Swan neck: - Swan neck in SNT design for optimizing the loading platform length, approx. 3,750 mm long, with rear chamfer approx. 850 mm x 10° - Hydraulically raisable and lowerable, lifting stroke ± 250 mm including hydraulic connection linked to the hydraulic axle compensation of the first two axles - Open at the rear third - Suitable for tractor units: 6 x 4 and 8 x 4 Loading platform: - Extendable loading platform, approx. 11,000 mm long with rear chamfer approx. 500 mm x 10°. - Recess in the loading platform including in the bevel for accommodating the excavator bucket arm, approx. 4,240 x 900 x 440 mm Blodjk Af Svspfx Afked - Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the respective platform length Ramps: - Pair of two-part steel ramps, approx. 4,650 mm long and 900 mm wide - Hydraulically foldable ramp tips - Ramps hydraulically adjustable sideways approx. 235 mm outward and approx. 215 mm inward, individually - "Super Grip" rubber surface 25 mm and steel plate approx. 5 mm as additional reinforcement on the loading platform bevel - Rectangular climbing strips 20x30 mm, approx. every 200 mm on the outer ramp frame Axles, suspension and tyres: - PA-X axle system, all axles force-steered hydro-mechanically - Steering behavior of the first two axles can be optimally adjusted to the loading platform length, both mechanically and hydraulically - Hose rupture valve on the axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pins for securing in raised position - 245/70 R 17.5 3PMSF Accessories included: - Removable steel front wall, approx. 400 mm high - Supply line connection strip for tractor unit, mounted at the height of the outer frame profile - 1 spare wheel - Outer beams of the swan neck with mounting holes for screwable lashing rings - First hole approx. 200 mm from front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - Tread plate covering over the swan neck - On the swan neck, 1 pair of removable ALU side walls, approx. 400 mm high, anodized - Removable ALU rear wall on the swan neck, approx. 400 mm high, anodized - 3.5" king pin / 2" king pin mounted - Guide plate on the swan neck for the fifth wheel, approx. 500 mm wide - 4 wheel chocks - 4 axle load gauges - Mechanical drop supports at the front - 1-piece INOX toolbox, approx. 2,480 x 340 x 390 mm - Mechanical drop supports at the front - Continuous steel plate covering on the loading platform with painted-on sand layer as slip protection - 1 intermediate table, approx. 500 mm wide, for extension, with elongated holes for insertable and repositionable bridging elements - Painted-on sand coating on the support surfaces of the intermediate table - Mechanical lock for locking the intermediate table when extended - 8 pairs of stake pockets in the outer frame - Extendable galvanized widening sections, approx. 230 mm per side - 1 pair of hydraulic rear supports - Central lubrication system - 1 reversing spotlight each on the left and right at the rear of the vehicle - 3 kW electric-hydraulic power unit - Loose widening planks in reinforced steel U-profile frame - Radio and cable remote control - 4 warning signs, approx. 423 x 423 mm

Stav: nový, maximálna hmotnosť nákladu: 67 200 kg, celková hmotnosť: 85 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, You can find our complete vehicle inventory, including immediately and soon-available vehicles, on our website. Excerpt from equipment. Full specification available on request. GOOSENECK * Gooseneck in SNT design to optimize platform length, approx. 3,700 mm long, rear tapered approx. 1,000 mm x 10° * For tractors: 6x2, 6x4, and 8x4 short wheelbase * Steel front wall, removable, approx. 400 mm high * 3 kW electro-hydraulic power pack for controlling hydraulic operations, except for hydraulic winches Blodpsrgzv Nsfx Afked * Outer beams of gooseneck with mounting holes for bolted lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of removable ALU side walls, approx. 400 mm high, anodized * 1 removable ALU rear wall, approx. 400 mm high, anodized * Over the gooseneck, approx. 40 mm thick hardwood floor; over the king pin, checker plate floor * 3.5-inch king pin * Guide plate from gooseneck for fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow control, incl. cabling bracket for supply lines (Faymonville couplings) * 2 pairs of stake pockets recessed into the gooseneck for approx. 100 x 50 mm plug-in stakes PLATFORM * Extendable platform, approx. 11,000 mm long, rear tapered approx. 500 mm x 10° * Pneumatic locking with conical lock bolts and reinforced lock positions; supply lines protected within the extendable rails and automatically adjust to the platform length * BPW axles and suspension, 1st axle steered ahead, 2nd axle fixed, all other axles hydraulic-mechanical forced steering * 1st axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with raise/lower valve * Tires: 235/75 R 17.5 3PMSF twin tires * Mechanical landing gear with two-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Platform with continuous and between the axles interrupted approx. 50 mm thick hardwood flooring (increases friction coefficient) * Long holes for attachable and repositionable bridging elements: – at the fixed section behind the gooseneck – at the front of the platform * 1 sliding intermediate platform, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate floor, front and rear with long holes for attachable and movable bridging elements * 1 pair of recessed flat lashing rings in the fixed front platform section (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the platform, folding outward (LC 10,000 daN) * 1 pair of mechanical rear supports * Steering from front and rear operated via cable remote control, with single-track alignment of the axles, without installation in the tractor * 1st axle with automatic lift-axle function and starting aid in accordance with EU regulation 2021/535 * Under the gooseneck and at the rear cross-member, left and right, each with a 7-pin socket and holder for warning plates * Painted sand coating on the outer frame of the platform as well as on the checker plates and the transition area between the platf

Stav: použitý, konfigurácia náprav: 3 nápravy, prvá registrácia: 10/2006, celková šírka: 2 850 mm, zavesenie: iný, veľkosť pneumatiky: 285/70R19.5, farba: čierny, Rok výroby: 2006, Výbava: ABS, = Additional options and accessories = - Central lubrication = Notes = Faymonville Jeep Dolly D3 Year: 10-2006 1 x lift axle 1 x friction-steered axle / trailing steering axle Air suspension Max. technical weight: 56,000 kg Faymonville STBZ-5VA Year: 10-2006 Pendulum axles Detachable gooseneck Adjustable loading table Extendable load bed: 400 cm Load bed length: 650 + 400 cm 50,000 kg gooseneck Max. technical weight: 119,680 kg = Further information = Axle configuration Tire size: 285/70R19.5 Brakes: Drum brakes Front axle 1: Twin tires; Tread depth left inner: 15%; left outer: 60%; right inner: 60%; right outer: 60%; Suspension: Air suspension Front axle 2: Twin tires; Tread depth left inner: 30%; left outer: 30%; right inner: 40%; right outer: 60%; Suspension: Air suspension Front axle 3: Twin tires; Steered; Tread depth left inner: 30%; left outer: 70%; right inner: 60%; right outer: 70%; Suspension: Air suspension Rear axle 1: Twin tires; Steered; Tread depth left inner: 30%; left outer: 60%; right inner: 40%; right outer: 70%; Suspension: Hydraulic suspension Rear axle 2: Twin tires; Steered; Tread depth left inner: 50%; left outer: 50%; right inner: 30%; right outer: 75%; Suspension: Hydraulic suspension Rear axle 3: Twin tires; Steered; Tread depth left inner: 60%; left outer: 60%; right inner: 60%; right outer: 60%; Suspension: Hydraulic suspension Rear axle 4: Twin tires; Steered; Tread depth left inner: 60%; left outer: 60%; right inner: 40%; right outer: 50%; Suspension: Hydraulic suspension Rear axle 5: Twin tires; Steered; Tread depth left inner: 70%; left outer: 70%; right inner: 20%; right outer: 70%; Suspension: Hydraulic suspension Weights Unladen weight: 36,600 kg Payload: 83,080 kg Gross vehicle weight (GVW): 119,680 kg Financial information Price: On request Identification Model number: STBZ-5VA + 3 AXLE JEEP DOLLY / E = Company information = Bjdoxbng Eepfx Afkeld ALL PRICES ARE NET EXPORT PRICES. Joris Versteijnen (NL-DE-EN), Wouter Greutink (NL-DE-EN-ES-IT), We speak Russian. We strive to provide accurate information, but no rights can be derived from the texts provided.

Stav: nový, pohotovostná hmotnosť: 15 900 kg, maximálna hmotnosť nákladu: 63 500 kg, celková hmotnosť: 68 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 12 700 mm, šírka ložného priestoru: 2 740 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75/r17,5, farba: sivý, prevádzková hmotnosť: 52 100 kg, Výbava: ABS, Gooseneck: Gooseneck in SNT design to optimize the loading area length, approx. 3,300 mm long, rear with chamfer approx. 1,000 mm x 10° Technical fifth-wheel load: 23,000 kg For tractor units: 6x2, 6x4, and 8x4 Loading Area: Extendable loading area, approx. 9,400 mm long with rear chamfer approx. 500 mm x 10° A recess in the loading area and chamfer for the excavator dipper stick, approx. 3,850 x 950 x 210/290 mm Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the respective loading length Axles and Tyres: BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanically forced-steered Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tools 235/75 R 17.5 3PMSF twin tyres Load index 143/141J (144/144F) Two-piece Steel Ramps: One pair of two-piece steel ramps approx. 4,350 mm long and approx. 900 mm wide Hardwood covering Hydraulically folding ramp tips; each ramp can be hydraulically shifted approx. 235 mm outward and approx. 215 mm inward Braking System: WABCO EBS-E brake system in accordance with EU regulations Sockets and Lighting: 24-volt lighting system Full Metallization: Complete HRM metallization with ZINACOR 850 for maximum corrosion protection Surface Treatment: Entire steel structure automatically blast-cleaned with shot wheels after welding Bsdpjmfqi Iefx Afksld Second blast cleaning with corundum for optimum coating adhesion Final painting in single-color Nova Gray with two coats of 2K paint; cavities then sealed with special wax Rims in silver gray Steel Structure: Steel structure made of high-strength fine-grain steels Steel grades: S355J2+N/S355MC S690QL/S700MC Accessories: Detachable steel front wall, approx. 400 mm high Supply line connection rail for tractor unit Coiled cable to supply the electro-hydraulic power unit and/or electric winch between semi-trailer and tractor unit with plug; electro-hydraulic unit for controlling hydraulic functions, except hydraulic winches Gooseneck side members with mounting holes for bolted lashing rings First hole approx. 200 mm from the front, subsequently every approx. 400 mm A mounting hole in the upper rear area of the gooseneck side member for a bolted lashing ring Approx. 40 mm thick hardwood covering above the gooseneck, checker plate covering above the kingpin Guide plate from the gooseneck for the fifth-wheel plate, approx. 500 mm wide Continuous 50 mm thick hardwood covering on the loading platform and interrupted hardwood between the axles Loading platform locking with conically welded locating profiles every 250 mm, including prestressing plate Slotted holes for insertable and adjustable bridging elements: on the fixed part behind the gooseneck at the front of the loading area 1 movable intermediate table for the extension tube with large cross-section Control valves for hydraulic ramps on the right side of the vehicle Central lubrication system with 1 pump, with standard grease in accordance with NLGI-2 Radio remote control for operating the steering, in addition to the cable remote control; receiver features two indicator lights for single-track monitoring

Stav: použitý, maximálna hmotnosť nákladu: 120 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 10/1993, Rok výroby: 1993, Výbava: ABS, Manufacturer: GOLDHOFER Model: THP-SL Year of manufacture: 1993 / 2010 comprising: - Gooseneck with hydraulic power unit (year: 1993 - hydraulics: 2003) Bsdst Irxxepfx Afkeld - 2-axle bogie module (year: 2010) - 3-axle bogie module (year: 1993) - 4-axle bogie module (year: 1993) - 5.8 m rigid excavator deck (year: 2010 - payload 100 t) - 8 m + 5 m extendable excavator deck (year: 1993 - payload 120 t) Available immediately. Subject to errors and prior sale.

Stav: použitý, celková hmotnosť: 120 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 07/1999, Goldhofer STHP-ET Gooseneck Main Features - Ball bearing turntable saddle plate, 3.5" king pin, and adjustable steering wedge - Integrated hydromechanical dual-circuit steering system for steering pendulum axles (2-circuit steering, 4 hydraulic cylinders) - Hydraulic lifting and lowering function, including support cylinders - Hydraulic differential control - Configured loading platform (approx. 3,700 x 2,440mm) with checker plate covering - Designed for a technical fifth wheel load up to 30t - Steering radius of 2,800mm for use with a 4-axle tractor unit - Laden fifth wheel height 1,350mm - Aluminium drop sides (400mm high, on all four sides) Goldhofer Heavy-duty Chassis Module Type THP/ET 3 - Loading length 4,200mm x 2,750mm - Loading height 1,250mm – chassis module combinable longitudinally and transversely - Box-type center frame with integrated air and hydraulic oil tanks - Optimized pin-lug coupling at the front and rear for longitudinal combinations Bjdswuixfjpfx Afkeld - Two single-tyre pendulum axle units with a total of 4 wheels per axle line - Axle units mounted to the chassis frame via king pin supports - Hydraulic axle compensation +/- mm, hydropneumatic gas suspension, and hose rupture safety valves on all axle units - Chassis-integrated, hydromechanical 2-circuit all-wheel force-steered axle system with a maximum axle steering angle of 60° - 2-line all-wheel air brake and spring-loaded parking brake - Hydraulic locking pins - Unladen weight approx. 8,000 kg - BPW axles Technical Data Technical axle load per axle line: at 5 km/h – 23,000kg, at 50 km/h – 14,100kg, at 80 km/h – 12,600kg Goldhofer THP-ET Vessel Bridge 75 t Payload Hydraulically widenable vessel bridge, 75,000 kg payload Base width 2,990mm, hydraulically extendable to 4,640mm Total vessel bridge length 9,900mm Internal vessel bridge length approx. 7,500mm Technically extendable by approx. 5,500mm Girder Dimensions Length 7,500mm + 5,500mm Height 500mm, bottom width 470mm, top width 320mm Goldhofer Heavy-duty Chassis Module Type THP/ET 5 - Loading length 7,000mm x 2,750mm - Loading height 1,250mm – chassis module combinable longitudinally and transversely - Box-type center frame with integrated air and hydraulic oil tanks - Optimized pin-lug coupling at the front and rear for longitudinal combinations - Two single-tyre pendulum axle units with a total of 4 wheels per axle line - Axle units mounted to the chassis frame via king pin supports - Hydraulic axle compensation +/- mm, hydropneumatic gas suspension, and hose rupture safety valves on all axle units - Chassis-integrated, hydromechanical 2-circuit all-wheel force-steered axle system with a maximum axle steering angle of 60° - 2-line all-wheel air brake and spring-loaded parking brake - Hydraulic locking pins - Unladen weight approx. 13,000 kg - BPW axles Technical Data Technical axle load per axle line: at 5 km/h – 23,000kg, at 50 km/h – 14,100kg, at 80 km/h – 12,600kg

Stav: použitý, výkon: 129 kW (175,39 k), farba: biely, Rok výroby: 2014, prevádzkové hodiny: 1 450 h, Rok výroby: 2014 Aplikačný materiál: Betón Bedpfx Ajvcp Rrjfksld

Stav: použitý, Funkcionalita: plne funkčný, najazdené kilometre: 7 500 km, výkon: 390 kW (530,25 k), prvá registrácia: 12/2023, typ paliva: nafta, konfigurácia náprav: 6x4, farba: biely, kabína vodiča: spacia kabína, Výbava: ABS, AdBlue, airbag, hydraulika, nezávislé kúrenie, palubný počítač, pohon všetkých kolies, uzávierka diferenciálu, ďalšie svetlomety, Cestný ťahač s návesom (nepredávam samostatne) pre nadrozmerné prepravy. Návěs s 3 riadenými nápravami – predlžiteľná vaňa na nadrozmernú dopravu. Úplne nový. Bledpfxexrcwge Afksd

Stav: použitý, maximálna hmotnosť nákladu: 52 100 kg, celková hmotnosť: 70 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 01/2009, ďalšia kontrola (TÜV): 03/2026, dĺžka ložného priestoru: 24 400 mm, šírka ložného priestoru: 2 550 mm, celková šírka: 2 550 mm, celková výška: 2 500 mm, Výbava: ABS, Goldhofer Swan Neck Low Loader * 5 axles with twin tires * Extendable low bed (8 m) * First axle liftable * Last 4 axles forced-steered * Hydraulic supports * Central lubrication system * BPW axles with drum brakes * Tires: 235/75 R17.5 * Permissible total weight: 70,000 kg * Unladen weight: 17,900 kg * Loading height: 0.85 m * Loading width: 2.55 m * Low bed length: 12.00 m - 20.00 m * Swan neck length: 4.0 m ----Vehicle number: 11037----Subject to errors and prior sale----Advertising and various decals have been digitally removed.----We are happy to assist you with all formalities involved in the purchase of a vehicle—just let us know your requests and suggestions and we will take care of everything. Among other things, we can offer the following services at an additional cost:----* Trade-in of your old vehicle * TÜV/SP inspection * Complete export processing * Finance brokerage Bljdpfx Aowta Dpjfksd * Application for export license plates * Vehicle transfer * Vehicle registration * Recoveries and vehicle transport ----Your VTS Team

Stav: použitý, Rok výroby: 2013, Rok výroby: 2013 Bedswdxtwjpfx Afkeld Aplikačný materiál: Betón