Müller-Mitteltal 3- Achs Satteltiefl.-Luft-Lenk,Hydr. Auffahrram. kúpiť použité (42 297)

Stav: nový, maximálna hmotnosť nákladu: 38 290 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 500 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * TS 3 Profile 30.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders Iaedel Tnvgjpfx Aqljt * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle is self-steering with electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering function as well as RtR-valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control unit mounted as infotool on the trailer, with pressure sensors for total axle load display * 15-pin power socket * LED lighting system 12 / 24V * Removable LED beacon at rear left ----General Attachments: * Side underrun protection * Landing gears at the front as well as mechanical swing-down supports at the rear of the chassis * Straight steel fenders * Spare wheel carrier mounted underneath the chassis, right side ----Low Loader Platform: * Fifth wheel platform with 45° chamfered front corners and a front toolbox made of galvanized sheet steel, W = 2,480 x H = 500 x L = 665 mm, with hinged lid * 400 mm aluminium side boards (RAL 9010 pure white) on the fifth wheel platform, foldable and removable * Rear board - 150 mm - inserted * Rear slope on the fifth wheel platform to the lowbed, approx. 700 mm long * Fifth wheel platform covered with 50 mm wooden planks, lowbed platform with 60 mm wooden planks * Tread plate above the axles ----Widenings: * 8 x mechanical folding extensions to 3 m total width, but not at the rear slope (extension planks supplied, stored on the fifth wheel platform) * Mechanically adjustable warning panel sets at the front and rear ----Load Securing (Lash Package): * 2 x 6.3 t lashing rings each on the fifth wheel platform, and 3 x 5 t lashing bars per side in the outer frame * On the lowbed platform, each side with 2 x 13.4 t lashing rings plus 4 x 10 t swing-out and lowerable lashing rings integrated into the outer frame * 2 x 6.4 t lashing eyes per side as well as 1 lashing ring in the excavator boom recess at the rear * 2 x container locks directly after the gooseneck on the lowbed platform ----Excavator Boom Recess: * Excavator boom recess from the end of the last rigid axle over the steering axle up to the rear member, continuous with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically single-piece, hot-dip galvanized hydraulic ramps approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-section valve block for future customer retrofit of hydraulic ramp shifting * The outer plank on the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump capacity on truck over 40 l/min up to 120 l/min) ----Loading Dimensions: * Loading area on fifth wheel platform: approx. 3,935 x 2,480 mm * Lowbed loading area: approx. 8,500 x 2,520 mm * Loading height unladen approx. 910 mm (incl. 860 mm approach slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractors) ----Paintwork: * Chassis, ramps, rear folding supports, extension consoles hot-dip galvanized * Axles, landing gears, air tanks painted black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images may contain equipment not included with the offered vehicle ----Delivery Time: * Available from CW 38/2026

Stav: nový, maximálna hmotnosť nákladu: 38 290 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 500 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * TS 3 Profile 30,0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle is trailing and steered, with electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering system, and RtR-valve ----Electrics / Lighting: * TPMS (tyre pressure monitoring system) * Smartboard operating box mounted on the trailer as an infotool with pressure sensors for overall axle load display * 15-pin electrical socket * LED lighting system 12 / 24V * Removable LED beacon at the rear left ----General Attachments: * Side underrun protection * Landing legs at front and mechanical swinging supports at the rear of the chassis * Straight steel mudguards Iaedpfjpk D I Ajx Aqlst * Spare wheel carrier located underneath the chassis on the right side ----Low Loader Deck: * Fifth wheel platform with front corners chamfered at 45°, and a front toolbox made from galvanized steel sheet (width = 2,480 x height = 500 x length = 665 mm) with folding lid * 400 mm high aluminium side boards (RAL 9010 pure white) on the fifth wheel platform, foldable and removable * Rear wall -150 mm- inserted high * Rear slope on the fifth wheel platform to lowbed, approx. 700 mm long * Fifth wheel platform with 50 mm wooden planks, lowbed platform with 60 mm wooden planks * Tread plate over the axles ----Widenings: * 8 x mechanical folding extensions for a total width of 3 m, but not in the rear slope (extension planks supplied with storage on the fifth wheel platform) * Mechanically adjustable warning sign packages front and rear ----Load Securing (Lasi Package): * On the fifth wheel platform: each side 2 x 6.3 t lashing rings and side frame 3 x 5 t lashing rods * On the lowbed platform: each side 2 x 13.4 t lashing rings and 4 x 10 t lashing rings, pivoting and lowerable, integrated into the outer frame * Each side 2 x 6.4 t lashing eyes, plus one lashing ring at the excavator arm rest at the rear * 2 x container locks directly after the drop in the lowbed platform ----Excavator Arm Tray: * Excavator arm tray runs continuously from end of last fixed axle over steering axle to the rear cross-member, with internal reinforcement profile approx. L = 2,450 x W = 770 x D = 270 mm ----Loading Ramps: * Mechanical, one-piece, hot-dip galvanized hydraulic loading ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for future customer upgrade to hydraulic ramp shifting * The outermost plank on the ramp is made from 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump outputs in the truck from over 40 l/min to 120 l/min) ----Loading Dimensions: * Loading area of fifth wheel platform: approx. 3,935 x 2,480 mm * Lowbed loading area: approx. 8,500 x 2,520 mm * Loading height unladen: approx. 910 mm (incl. 860 mm approach slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, loading ramps, rear folding supports, and extension consoles are hot-dip galvanized * Axles, landing legs, and air tanks painted in black shade * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Sample images may show equipment not included with the vehicle on offer ----Delivery Time: * Availabl

Stav: nový, maximálna hmotnosť nákladu: 38 290 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 500 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle is trailing-steered with electro-pneumatic steering lock ----Suspension: * Air suspension with raising and lowering function as well as RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control unit mounted on the trailer as an info-tool with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting system 12 / 24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Landing gears at the front and mechanical swing-down supports at the rear of the chassis * Straight steel sheet mudguards * Spare wheel carrier mounted on the right side under the chassis ----Low Loader Platform: * Saddle platform with 45° chamfered front corners and front toolbox made of galvanized steel sheet (W = 2,480 x H = 500 x L = 665 mm) with folding lid * 400 mm high aluminum drop sides (RAL 9010 pure white), foldable and removable, on the sides of the saddle platform * Rear wall insert, 150 mm high * Rear slope on the saddle platform to the low-bed section, approx. 700 mm long * Saddle platform with 50 mm wooden planks and low-bed platform with 60 mm wooden planks * Chequer plate over the axles ----Extensions: * 8 x mechanical fold-out extensions to a total width of 3 m, not included in the rear slope (extension planks available stored on the saddle platform) * Mechanically adjustable warning sign packages at front and rear ----Load Securing (Lash Package): Iodpey Ngzysfx Aqljat * On the saddle platform: 2 x 6.3 t lashing points each, and 3 x 5 t lashing bars per side in the outer frame * On the low-bed platform: 2 x 13.4 t lashing rings per side, and 4 x 10 t lashing rings, swiveling and retractable, integrated in the outer frame * Per side: 2 x 6.4 t lashing eyes, plus 1 lashing point in the excavator arm trough at the rear * 2 x container locks directly behind the gooseneck in the low-bed platform ----Excavator Arm Trough: * Continuous excavator arm trough from the end of the last rigid axle over the steering axle to the end cross member, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Access Ramps: * Mechanical, one-piece, hot-dip galvanized hydraulic access ramps, approx. 3,000 x 720 mm (mechanically adjustable laterally) * 4-way control block for optional future customer retrofitting for hydraulic ramp adjustment * The outer board of the access ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp as well as on the approach slope * Rubber matting on the ramp and approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (with hydraulic pump performance in the truck over 40 l up to 120 l/min) ----Loading Dimensions: * Loading area of the saddle platform: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, access ramps, rear fold-down supports, widening consoles hot-dip galvanized * Axles, landing gears, air tanks painted in black shade * Vehicle is hot-dip galvanized ----Info: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Sample images may show e

Stav: nový, maximálna hmotnosť nákladu: 38 290 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 500 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle with trailing steering, electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering system, including RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control unit mounted on the trailer as an infotool with pressure sensors for total axle load display * 15-pin power plug * LED lighting system 12 / 24V * Removable LED warning beacon at the rear left ----General Accessories: * Side underrun protection * Support cranks at the front and mechanical swivel supports at the rear of the chassis * Straight steel mudguards * Spare wheel carrier mounted on the chassis, right side ----Lowbed Platform: * Fifth wheel platform with 45° beveled front corners and a front toolbox made of galvanized sheet steel, W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high aluminum side boards (RAL 9010 pure white), hinged and removable on the fifth wheel platform * Rear wall - 150 mm - slotted in * Rear ramp on the fifth wheel platform, approximately 700 mm long, into the lowbed * Fifth wheel platform with 50 mm wooden planks, lowbed platform with 60 mm wooden planks * Checker plate above the axles ----Extensions: * 8 x mechanical folding extensions to 3 m overall width; not present on the rear ramp (extension boards provided with storage on the fifth wheel platform) * Mechanically adjustable warning sign packages at the front and rear ----Load Securing (Load Securing Package): * On the fifth wheel platform: 2 x 6.3 t lashing rings each and 3 x 5 t lashing bars per side in the outer frame * On the lowbed platform: 2 x 13.4 t lashing rings per side and 4 x 10 t lashing rings, pivoting and retractable, integrated in the outer frame * 2 x 6.4 t lashing eyes per side and 1 lashing ring at the rear in the excavator arm recess * 2 x container locks directly after the neck on the lowbed platform ----Excavator Arm Recess: * Excavator arm recess continuously from the end of the last rigid axle over the steering axle to the end crossbeam with internal reinforcement profile approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically single-piece, hot-dip galvanized hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control valve block for future customer retrofitting of hydraulic ramp shift * The outer board of the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the ramp slope * Rubber on the ramp and ramp slope ----Hydraulics: Iaedpfey Ngz Hex Aqlst * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck from over 40 l/min up to 120 l/min) ----Loading Dimensions: * Loading area of the fifth wheel platform: approx. 3,935 x 2,480 mm * Lowbed loading area: approx. 8,500 x 2,520 mm * Loading height unladen: approx. 910 mm (including 860 mm ramp slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, ramps, rear folding supports, extension mountings hot-dip galvanized * Axles, support cranks, air tanks painted in black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images may show equipment not included in the offered vehicle * Sample images ----

Stav: nový, maximálna hmotnosť nákladu: 23 500 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 380 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * PT 30 Profile: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lifting and lowering device including return-to-ride (RtR) valve * Smart-Board installed on trailer as info tool (for axle load display – front and rear separate) * Tyre pressure monitoring system with in-cab display via EBS signal, no installation required on the truck * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign panels front and rear * VA plastic quarter mudguards with spray protection * Rear straight galvanized steel skirts with spray protection * High-visibility reflective contour tape laterally and at the rear * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * Drawbar 1,200 mm long with 40 mm towing eye and height adjustment via traction spring & turnbuckle * Toolbox made of galvanized steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted right side * Equipment box within turntable with folding lid, 2 container locks permanently fitted (directly after turntable platform) * ROBOT-welded anti-slip surface on steel plate of the turntable platform (raised weld seams) * Load securing package (La-Si-Paket) includes: 2 lashing eyes (13.4 t) front left & right on front wall support, 1 pair each front & rear UVV lashing rings (13.4 t), 3 pairs per side of swiveling and retractable UVV lashing rings (10 t), loadable in any direction, integrated into external frame, plus 3 stake pockets per side with simultaneous 2 t lashing point * 6 pairs of mechanical folding outriggers for 3 m overall width (excluding rear slope) * Extension planks stored in centre of load area * Hydraulic one-piece access ramps approx. 3,000 x 720 mm * Mechanically adjustable laterally * 4-way hydraulic valve block for later retrofitting of hydraulic ramp shifting * Excavator arm rest spanning rear axle up to end crossmember (total length approx. 2,100 mm) * 2 pairs of lashing eyes LC 6400 daN in the excavator arm rest, positioned sideways in main frame * 2 galvanized steps at turntable, left and right * Profifix lashing rail centered lengthwise in flat area for lashing up to LC 3000 daN * Chassis, turntable, folding outriggers, drop leg supports and access ramps hot-dip galvanized Iasdjtplwiopfx Aqlet * Axles, turntable ring, air tanks, and drawbar painted in black finish * Loading edge when loaded approx. 910 mm +/- 20 mm air suspension * New vehicle with manufacturer’s warranty * Errors and prior sales excepted * Available approx. from calendar week 22/2026 * Sample images

Stav: nový, maximálna hmotnosť nákladu: 23 500 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 380 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * PT 30 Profile: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lift/lower function and RtR-valve * Smart-Board infotool mounted on trailer (for axle load display – front and rear individually) * Tire pressure monitoring with display capability in the truck via EBS signal, without installation required on the truck side * Side underrun protection * Swing-out support legs at the rear of the chassis frame * Mechanically adjustable warning sign sets at front and rear * Front axle: plastic quarter mudguards with spray protection * Rear axle: straight, galvanized steel skirts with spray protection * Reflective contour marking strips on sides and rear * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * Drawbar 1,200 mm long with 40 mm towing eye and height adjustment via draw spring & turnbuckle * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted right side * Storage box in the turntable for accessories, with hinged lid, 2 container locks permanently installed (directly after turntable platform) * ROBOT-welded anti-slip surface on the steel plate of the turntable platform (projecting weld beads) * Load securing package including: 2 lashing eyes (13.4 t) at front left & right on the bulkhead beam, 1 pair each of UVV lashing rings (13.4 t) at front & rear, and 3 pairs each side of UVV lashing rings (10 t), pivotable and lowerable, loadable in all directions and recessed in the outer frame; 3 stake pockets per side, each with 2 t lashing capability Iajdpfoxptn Rox Aqljt * 6 pairs of mechanical folding outriggers for 3-meter overall width (not in rear bevel) * Width boards stored centrally on the loading platform * Hydraulic one-piece loading ramps, approx. 3,000 x 720 mm * Mechanically adjustable sideways * 4-way valve block for future retrofitting of hydraulic ramp adjustment * Continuous excavator arm rest above rear axle up to end beam (total length approx. 2,100 mm) * 2 pairs lashing eyes LC 6,400 daN in excavator arm rest, mounted laterally in the longitudinal frame * 2 galvanized steps at the turntable, left and right * Profifix lashing rail in the center axis, in flat area for lashing up to LC 3,000 daN * Chassis, turntable, folding outriggers, drop legs and loading ramps hot-dip galvanized * Axles, slewing ring, air tank, and drawbar painted in black * Loading edge height approx. 910 mm +/- 20 mm with air suspension * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Available approx. from CW 22/2026 * Sample photos

Stav: nový, maximálna hmotnosť nákladu: 23 940 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2025, * T3 Profi 30.0: * EBS brake system * RDÜ tyre pressure monitoring system * Emergency release device for spring-actuated cylinders * Drum brakes * 3 x 11 t Gigant axles * Parabolic springs, mechanical axle equalisation at the rear * Side underrun protection * Swivel support legs at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanised steel skirts, each with spray protection Iajdpfxel Th I Ae Aqlst * Reflective contour tape on sides and rear * Tool box made of galvanised steel sheet, black powder-coated, approx. 650 x 300 x 600 mm * Hinged lid (hot-dip galvanised) for tool box on turntable platform * Multi-voltage electrical system * LED rear lights * Removable rotating beacon at the rear * Drawbar with 50 mm draw eye and height adjustment via traction spring & turnbuckle * 15-pin electrical connector * 4 stake pockets on each side (stakes not included) with simultaneous lashing option * Load securing package comprising: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 6 pairs of UVV-compliant lashing rings, swivelling and retractable, loadable in all directions and recessed into the outer frame - 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not in the rear taper) * Widening boards stored in the centre of the loading area * One-piece hot-dip galvanised hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-way control block for retrofitting hydraulic side ramp shift * Loading area over turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm drive-on taper) * Chassis, turntable, drawbar, and loading ramps hot-dip galvanised * Axles, springs, air tanks, etc. painted in black tone * 235/75 R 17.5 twin tyres * Unladen weight approx. 5,980 kg * Technical permissible gross weight of 30,000 kg * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from calendar week 11/2026

Stav: nový, maximálna hmotnosť nákladu: 23 940 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 Profi 30.0: * EBS braking system * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t Gigant axles * Parabolic springs, mechanical axle equalization at rear * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel skirts, each with spray protection * Reflective contour tape on sides and rear * Toolbox made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Folding lid (hot-dip galvanized) for toolbox located on the bogie platform * Multi-voltage system * LED tail lights * Removable rotating beacon at the rear * Drawbar with 50 mm towing eye and height adjustment via draw spring & turnbuckle * 15-pin power connector * Four stake pockets per side (stakes not included), each with integrated lash-down points * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on main frame of bogie platform, 6 pairs of UVV-compliant swivel and retractable lashing rings, loadable in all directions and recessed into the outer frame – in corners 13.4 t, otherwise 10 t each * 6 pairs of mechanical fold-out outriggers for total width of 3 m (not in the rear tapered section) * Widening planks stored in the center of the loading area * Hot-dip galvanized, one-piece hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways Ijdsl Th Nnepfx Aqljat * 4-section control block for retrofitting hydraulic sideways ramp displacement * Loading platform above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading platform: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach slope) * Chassis, bogie, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * Own weight approx. 5,980 kg * Permissible gross weight of 30,000 kg technically possible * New vehicle with manufacturer’s warranty * Errors and intermediate sale excepted * Available from calendar week 11/2026

Stav: použitý, číslo stroja/vozidla: GE11/142/2022, pohotovostná hmotnosť: 6 350 kg, maximálna hmotnosť nákladu: 17 650 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 08/2008, dĺžka ložného priestoru: 8 500 mm, šírka ložného priestoru: 2 500 mm, zavesenie: vzduch, Veľmi dobre zachované vozidlo od prvého majiteľa Trojosý prejazdný nízkoložný príves Nízkoložný príves s nájazdovou rampou Iaodjn Aw Hkjpfx Aqlet Ťažká preprava Typ T3 Komakt 30,0 Dĺžka 8500 mm Šírka 2500 mm Vzduchové odpruženie Obchodno/exportná netto cena – 15 990 € Zmeny, medzi-predaj a omyly vyhradené ===== Telefón 2 Mobil =====

Stav: použitý, celková hmotnosť: 47 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 11/2004, ďalšia kontrola (TÜV): 08/2026, * Müller Mitteltal TS3 nízkozdvižný náves * Prvá evidencia: 11/2004 * 3 nápravy * Vzduchové odpruženie * Gigant nápravy * Hydraulické dlhé rampy, posuvné a sklopné * Rozšírenia ložnej šírky z 2,50 m na 3,0 m * Dĺžka ložnej plochy: 8,50 m pri ložnej výške 0,85 m * Dĺžka ložnej plochy na krku: 3,40 m pri ložnej výške 1,50 m * Podpery * Pohotovostná hmotnosť: 10 260 kg * Technicky prípustná celková hmotnosť: 47 000 kg Iajdpew Tgkbjfx Aqlet * STK platná do: 08/2026 * Technická kontrola platná do: 02/2026

Stav: použitý, pohotovostná hmotnosť: 6 500 kg, maximálna hmotnosť nákladu: 23 500 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 06/2010, zavesenie: oceľ, veľkosť pneumatiky: 235 / 75 R 17,5, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235 / 75 R 17,5, veľkosť zadnej pneumatiky: 235 / 75 R 17,5, kabína vodiča: iný, emisná trieda: žiadny, palivo: biodiesel, Výbava: ABS, pneumatická brzda, Vozidlo sa predáva na zákazku zákazníka., čiastočne poškodené drevené podlahové dosky, 17 párov kotviacich ôk, výška nakladania cca 900 mm, -- technické údaje, chyby a zmeny vyhradené, ilustračné fotografie --, Viac informácií nájdete na: !, Ďalšie podrobnosti: ! Isdpfx Aey Ryb Neqljat

Stav: použitý, pohotovostná hmotnosť: 7 340 kg, maximálna hmotnosť nákladu: 22 660 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 05/2012, dĺžka ložného priestoru: 9 200 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75 R 17,5, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235/75 R 17,5, veľkosť zadnej pneumatiky: 235/75 R 17,5, kabína vodiča: iný, emisná trieda: žiadny, Výbava: ABS, pneumatická brzda, Dĺžka ložnej plochy cca 9 200 mm, ložná výška cca 900 mm, 16x kotviacich ôk, vozidlo sa predáva na objednávku, vyhradzujeme si právo na tlačové chyby, omyly a zmeny, ilustračné obrázky. Viac údajov na: !, More Details: ! Ijdpfxsy Rr Iho Aqlsat

Stav: použitý, pohotovostná hmotnosť: 7 340 kg, maximálna hmotnosť nákladu: 22 660 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 05/2012, dĺžka ložného priestoru: 9 200 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75 R 17,5, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235/75 R 17,5, veľkosť zadnej pneumatiky: 235/75 R 17,5, kabína vodiča: iný, emisná trieda: žiadny, Výbava: ABS, pneumatická brzda, Dĺžka ložnej plochy cca 9 200 mm, ložná výška cca 900 mm, 16x kotviacich ôk, vozidlo sa predáva na objednávku, vyhradzujeme si právo na tlačové chyby, omyly a zmeny, ilustračné obrázky. Viac údajov na: !, More Details: ! Iodjy Izwyepfx Aqlsat

Stav: použitý, pohotovostná hmotnosť: 6 500 kg, maximálna hmotnosť nákladu: 23 500 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 06/2010, zavesenie: oceľ, veľkosť pneumatiky: 235 / 75 R 17,5, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235 / 75 R 17,5, veľkosť zadnej pneumatiky: 235 / 75 R 17,5, kabína vodiča: iný, emisná trieda: žiadny, palivo: biodiesel, Výbava: ABS, pneumatická brzda, Vozidlo sa predáva na zákazku zákazníka., čiastočne poškodené drevené podlahové dosky, 17 párov kotviacich ôk, výška nakladania cca 900 mm, -- technické údaje, chyby a zmeny vyhradené, ilustračné fotografie --, Viac informácií nájdete na: !, Ďalšie podrobnosti: ! Ijdpfx Aoy Izvvoqleat

Stav: použitý, pohotovostná hmotnosť: 5 750 kg, maximálna hmotnosť nákladu: 24 250 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 01/1993, zavesenie: oceľ, veľkosť pneumatiky: 235/75R17,5 141/140J, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235/75R17,5 141/140J, veľkosť zadnej pneumatiky: 235/75R17,5 141/140J, kabína vodiča: iný, emisná trieda: žiadny, Výbava: ABS, pneumatická brzda, -- Tlačové chyby, omyly a zmeny vyhradené, ilustračné obrázky --, Viac údajov na: !, Viac detailov: ! Ijdpfx Asy Ifhvjqloat

Stav: použitý, pohotovostná hmotnosť: 6 200 kg, maximálna hmotnosť nákladu: 23 800 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 11/2006, zavesenie: oceľ, veľkosť pneumatiky: 235/75R17,5 141/140J, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235/75R17,5 141/140J, veľkosť zadnej pneumatiky: 235/75R17,5 141/140J, kabína vodiča: iný, emisná trieda: žiadny, Výbava: ABS, pneumatická brzda, Upevňovacie oká, -- Tlačové chyby, omyly a zmeny vyhradené, ilustračné fotografie --, Viac údajov na: !, Viac informácií na: ! Isdpfxoy Hh Ics Aqleat

Stav: použitý, pohotovostná hmotnosť: 6 400 kg, maximálna hmotnosť nákladu: 23 600 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 01/2013, dĺžka ložného priestoru: 7 800 mm, šírka ložného priestoru: 2 500 mm, výška ložného priestoru: 920 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75R17.5, farba: žltá, najazdené kilometre: 1 001 km, typ prevodu: iný, kabína vodiča: iný, Výbava: ABS, Umiestnenie vozidla: na ceste / v tranzite, 3 osi, otočný oj, listové odpruženie, ABS (protiblokovací systém), uchytné oká, hydraulické nájazdové rampy, zadná podpera, bočné hliníkové ochranné kryty, dvojmontáž kolies. Nadstavba: 3-nápravový nízkopodlažný príves s hydraulickými nájazdovými rampami, pozinkované rampy, 3x 10t nápravy! Všetky údaje sú bez záruky, pretože vozidlo je na ceste! ÚDAJE O PRÍSLUŠENSTVE BEZ ZÁRUKY, zmeny, medzi-predaj a chyby vyhradené! Iaodsy R Ekispfx Aqlet

Stav: nový, maximálna hmotnosť nákladu: 37 390 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-assist for maneuvering purposes on the first axle, controlled via EBS (without truck-side installation) * Rear-most axle as trailing steering axle with electro-pneumatic steering lock * Trailing axle lock operated from the cab for maneuvering via EBS (without truck-side installation) ----Suspension: * Air suspension with lifting and lowering system and Ride-Height Return (RtR) valve ----Electrics / Lighting: * Smart-Board mounted on the trailer as infotool with pressure sensors for total axle load display * 15-pin power socket Iajdpfx Ajq Euakeqlot * LED lighting 12 / 24 V * Removable rear LED warning beacon * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator function * Tire pressure monitoring with display in the truck via EBS signal (without truck-side installation) ----General Attachments: * Side underrun protection * Support legs at the front and swiveling supports at the rear of the chassis * Straight steel fenders * Spare wheel holder in front of the bulkhead crossmember (without spare wheel) * Mechanically adjustable warning sign sets at the front and rear * Swivel arm as carrier for connection lines from the truck to the semi-trailer ----Low Loader Deck: * 2nd king pin position * Semi-trailer platform with 45° chamfered front corners and front toolbox made of galvanized, powder-coated sheet steel (W = 2,480 x H = 500 x L = 665 mm) with hinged lid * 400 mm high folded and removable aluminum side boards (in RAL custom color) on the sides of the semi-trailer platform * Removable rear board, 150 mm high * Rear slope on the semi-trailer platform to low-bed section, approx. 700 mm long with chequered plate covering, as well as a perforated strip at the end for attaching aluminum approach ramps * Semi-trailer platform with 50 mm clamped wooden planks, low-bed platform with 60 mm clamped wooden planks * Checker plate over the axles * 9 mechanical folding extensions for total width up to 3 meters, except on the rear slope (extension boards available, with closed storage compartment transversal under the loading area) * 3 recesses under the platform for storing either aluminum approach ramps or wooden planks for wheel well covers ----Load Securing (LaSi package): Semi-trailer Platform: * Perforated outer frame, 45° angled, with pattern for lashing equipment (2 t lashing capacity per lashing point at a min. 480 mm spacing) * Each side with 3 x 13.4 t lashing rings recessed in the floor (1 x on the semi-trailer platform, 1 x on the longitudinal beams after the step, 1 x above the middle axle next to the longitudinal beam) Low-Bed Platform: * Each side with 3 x 13.4 t lashing rings on the outer frame (1 x at the start of the semi-trailer platform step, 1 x start of the ramp slope, 1 x end of ramp slope) * Each side with 2 x 10 t lashing rings (1 x between front wheel well and 1st axle, 1 x between 2nd and 3rd axle) * Each side with 3 x 5 t lashing rings bolted to the outer frame of the wheel wells (2 on the front well, 1 on the rear) ----Excavator Arm Rest: * Extended excavator arm rest from the end of the last fixed axle, over the steering axle, to the end beam, continuous, with internal reinforcement profile approx. W = 770 mm x Depth rear = 270 / Depth front 170 mm * Each side with 2 x 6.4 t lashing ri

Stav: nový, maximálna hmotnosť nákladu: 37 390 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (Electronic Braking System) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-up aid for shunting purposes engaged on the first axle via EBS (without truck-side installation) * Last axle as a trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle from the cab for shunting purposes, operated via EBS (without truck-side installation) ----Suspension: * Air suspension with lifting and lowering function as well as RtR valve ----Electrics / Lighting: * Smart Board mounted as an info tool on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tire pressure monitoring system with display function in the truck via EBS signal (without truck-side installation) ----General attachments: * Side underrun protection * Landing legs at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall cross member (without spare wheel) * Mechanically adjustable warning signage packages at the front and rear * Swivel arm as carrier for connection lines from the truck to the semi-trailer ----Low-bed loading area: * 2nd king pin position * Fifth wheel platform with 45° beveled front corners and a front toolbox made of galvanized, powder-coated sheet steel, W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm aluminum side boards on the fifth wheel platform (custom RAL color), foldable and removable * Rear wall -150 mm- slotted in * Rear chamfer on the fifth wheel platform to low-bed, approx. 700 mm long with checker plate cover and at the end a perforated strip for hooking in aluminum approach ramps * Fifth wheel platform with 50 mm clamped wooden floorboards, and low-bed platform with 60 mm clamped wooden floorboards * Checker plate above the axles * 9 mechanical folding wideners to 3 m total width, but not on the rear chamfer (widening planks available with closed storage box transversely under the loading area) * 3 receiver shafts under the fifth wheel platform for optional storage of aluminum approach ramps or wooden planks for covering wheel recesses ----Load securing (LaSi Package): Fifth wheel platform: * Perforated outer frame bent at 45°, with hole pattern for lashing equipment (2 t lashing capacity per point with a minimum spacing of 480 mm) * Each side: 3 x 13.4 t lashing rings recessed in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal beams after the kick-up, 1 x above the middle axle next to the longitudinal beam) Low-bed platform: * Each side: 3 x 13.4 t lashing rings on the outer frame (1 x at the start of the fifth wheel platform kick-up, 1 x at the beginning of the approach ramp, 1 x at the end of the approach ramp) * Each side: 2 x 10 t lashing rings (1 x between front wheel recess and 1st axle, 1 x between the 2nd and 3rd axle) * Each side: 3 x 5 t lashing rings bolted to the outer frames of the wheel recesses (2 at the front wheel recess, 1 at the rear wheel recess) ----Excavator arm trough: Iodetpta Dspfx Aqlsat * Extended excavator arm trough, continuous from end of last rigid axle over steering axle to end cross member, with inner reinforcement profile approx. W = 770 mm x D rear = 27

Stav: použitý, maximálna hmotnosť nákladu: 10 870 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 06/2025, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2023, Výbava: ABS, KA-TA-R 14.4: ----Braking system: * Wabco ABS * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equaliser unit ----Drawbar / Flange Draw Eye: * Height-adjustable drawbar by approx. 300 mm with 40 mm flange draw eye ----Electrics / Lighting: Iasdpfx Aqol Th Htolst * 15-pin power connector * Multi-chamber tail lights ----General accessories: * Jost mechanical landing gear at front * Rear: 2 mechanical folding supports * Plastic toolbox approx. 650 x 350 x 320 mm, mounted front right side of the chassis * Bolt-on underrun protection * Plastic quarter mudguards * Net hooks at each position of the central locking as well as 2 on the front wall ----Chassis: * Chassis made from high-tensile fine-grained steel ----Tipper body: * Steel pallet-style 3-way tipper with continuous side walls, top with inner tube reinforcement – without centre stanchions, foldable with drop-side spring assist * Rear posts bolted * Combination steel double rear doors, asymmetrically split – can be swung and locked up to 270°, not foldable – with additional pendulum frame for automatic tailgate opening during tipping, locking via galvanised rotary bolt at the rear and central locking, deactivation function for automatic rear wall operation when reversing tipping with open wing door * 4 mm fine-grained steel floor plate * Rear receiver rail for loading ramps ----Load securing: * 1 x 5 t lashing ring in each corner, and 4 x 3 t lashing eyes each side recessed into the outer frame ----Ramps: * 1 pair of aluminium loading ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tyred & tracked vehicles * Lockable storage compartment under the loading platform rearwards, integrated in chassis, for the ramps ----Tyres: * Tyres: 285/70 19.5 ----Paintwork: * Chassis, drawbar, underrun protection, rear stake, rear folding supports hot-dip galvanised * Axles, springs, air tank and landing gear painted in black tone * Drop-side paintwork in RAL 9010 pure white * Side wall paintwork available in other RAL colours at extra charge ----Info: * Reinforced body with load securing certificate * Vehicle has a day registration (unused) * Subject to errors and prior sale ----Delivery time: Available immediately ex Egestorf

Stav: použitý, maximálna hmotnosť nákladu: 10 870 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 06/2025, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2023, Výbava: ABS, KA-TA-R 14.4: ----Braking System: * Wabco ABS * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizing unit Iaedjl Th Duspfx Aqlot ----Drawbar / Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm, with 40 mm flange drawbar eye ----Electrical System / Lighting: * 15-pin power connector * Multi-chamber tail lights ----General Attachments: * Jost mechanical landing gear at front * 2 mechanical folding supports at rear * Plastic toolbox, approx. 650 x 350 x 320 mm, mounted at the front right side of the chassis * Bolt-on underrun protection * Plastic quarter mudguards * Net hooks at the central locking stanchions and 2 on the front wall ----Chassis: * Chassis made of fine-grained steel ----Tipping Platform: * Steel pallet 3-way tipper body, continuous side walls with internal pipe reinforcement, without central stanchions, foldable with board wall spring lifting device * Rear stanchions bolted * Combined steel double-wing rear doors, asymmetrically divided, can be swung and locked at 270°, not foldable, with additional pendulum frame for automatic rear wall opening when tipping, locking via galvanized rod lock at rear and central locking; deactivation function for automatic rear wall function when tipping backwards with open wing door * 4 mm sheet steel floor made of fine-grained steel * Rear guide rail for loading ramps ----Load Securing: * Each corner features 1 x 5 t lashing ring, plus 4 x 3 t lashing eyes each side recessed in the outer frame ----Ramps: * 1 pair of aluminium approach ramps, approx. 3,570 x 410 mm (load capacity 10 t / pair), suitable for rubber-tyred & tracked vehicles * Lockable storage compartment for the ramps recessed under the loading bed at the rear of the chassis ----Tyres: * Tyres: 285/70 19.5 ----Paintwork: * Chassis, drawbar, underrun protection, rear stanchion, rear folding supports hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in black tone * Board wall coating in RAL 9010 pure white * Side wall coating available in any RAL color for an additional charge ----Information: * Reinforced body with load securing certificate * Vehicle has a day registration (unused) * Subject to errors and prior sale ----Delivery Time: Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 17 650 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 230 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2026, * TP 30.0 with 3 cable drum mounts ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release device for spring-loaded actuators * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lift and lower function ----Drawbar: * Drawbar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: Iedpfex Nli Nox Aqljat * Tire pressure monitoring with display option in truck dashboard via EBS signal - no truck-side installation required - * 15-pin power connector * 2 additional LED reversing lights (activated via reverse gear) * LED lighting ----General Attachments: * Aluminum air tank * Stainless steel side toolbox approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Flatbed: * Zurr-fix outer frame, 45° edged, with hole pattern for lashing equipment, lashing capacity per lashing point 2,000 kg at 480 mm spacing * Installation of 3,000 kg drop lashing brackets possible at approx. 600 mm intervals - delivery includes 12 units of 3,000 kg side lashing brackets per side * 5 pockets per side for pipe stanchions 100 x 50 mm in the outer frame - stanchions not included in delivery * 30 mm phenolic plywood floor ----Drum Mounts: * 3 galvanized drum mounts secured with container locks, with side forklift pockets, center-to-center 800 mm (pocket width 185 mm) * Max drum diameter 2,600 mm and max drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with cross brace * 6,000 kg maximum drum weight per cable drum support * Without drive and drum brake * Support arm with clamping lock for securing the drum shaft * Steel drum shaft, 76 mm diameter, centered and with rotating ends * 2 collar rings * 2 centering cones made of polyamide * 4 pcs. 3.2 t lashing eyes on the support arms for customer-side securing of the drum against rotation and unwinding ----Loading Height: * approx. 1,040 mm when loaded ----Paintwork: * Chassis, turntable, drawbar, outer frame, rear underrun protection hot-dip galvanized * Axles painted in black ----Information: * Technical upgrade to 30 t gross weight possible * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from calendar week 51 / 2026

Stav: nový, maximálna hmotnosť nákladu: 17 650 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 230 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2026, * TP 30.0 with 3 cable drum supports ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lifting and lowering system ----Drawbar: * Drawbar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: Iedjx Nlkgepfx Aqleat * Tire pressure monitoring with display functionality in the truck dashboard via EBS signal – no truck-side installation required * 15-pin electrical connector * 2 additional LED reverse lights (activated via reverse gear) * LED lighting ----General Equipment: * Aluminum air tank * Stainless steel toolbox mounted on the side, approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Flatbed: * Zurr-fix exterior frame, bent at 45°, with hole pattern for lashing equipment, lashing capacity per lashing point 2,000 kg at 480 mm intervals * Option to install 3,000 kg drop lashing rings at approx. 600 mm intervals – delivery includes 12 pcs. 3,000 kg lateral lashing rings per side * 5 pockets per side for tube stakes 100 x 50 mm in the outer frame – stakes not included in delivery * 30 mm phenolic resin-coated plywood floor ----Drum Mounts: * 3 galvanised drum supports, secured via container locks, with side forklift pockets, center-to-center 800 mm (pocket width 185 mm) * Maximum drum diameter 2,600 mm, maximum drum width 1,650 mm * Clear distance between support arms approx. 1,775 mm, with cross-connection * Max. drum weight per cable drum support: 6,000 kg * Without drive and drum brake * Support arm with tension lock for securing the drum shaft * Steel drum shaft, 76 mm diameter with centering and rotating ends * 2 stop rings * 2 centering cones made of polyamide * 4 pcs. 3.2 t lashing eyes on the support arms to secure the drum on the customer side against rotation and unwinding ----Loading Height: * Approx. 1,040 mm when loaded ----Paintwork: * Chassis, turntable, drawbar, outer frame, and rear underrun protection hot-dip galvanized * Axles painted in a black tone ----Information: * Upgrading to 30 t gross weight technically possible * New vehicle with manufacturer warranty * Errors and prior sale excepted ----Delivery Time: * Available as of approx. week 51 / 2026

Stav: nový, maximálna hmotnosť nákladu: 37 560 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (Electronic Braking System) * Emergency release unit for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Traction aid for shunting purposes activated on the first axle via EBS (no installation required on the truck) * Rear axle configured as a trailing steering axle with electro-pneumatic steering lock * Locking of the trailing steering axle for shunting purposes controlled from the driver's cab via EBS (no installation required on the truck) ----Suspension: * Air suspension with lifting/lowering system and RtR valve ----Electrics / Lighting: * Smart-Board info tool mounted on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * LED rotating beacon (removable) at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lamps with turn signal control * Tire pressure monitoring with option to display in the truck via EBS signal (no installation required on the truck) ----General Attachments: * Side underrun protection * Landing gear at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the bulkhead crossmember (without spare wheel) * Mechanically adjustable warning sign packages front and rear * Pivoting arm as a carrier for connection lines from truck to semi-trailer ----Lowbed Area: * 2nd kingpin position * Saddle platform with 45° chamfered front corners, and a front toolbox made of galvanized, powder-coated steel sheet, W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high aluminum drop sides (in custom RAL color) on the sides of the saddle platform, foldable and removable * Rear wall inserted at 150 mm height * Rear chamfer on the saddle platform towards the lowbed, approx. 700 mm long with checkered plate surface, with a perforated strip at the end for hanging aluminum approach ramps * Saddle platform with 50 mm clamped wood planks and lowbed platform with 60 mm clamped wood planks * Tread plate above the axles * 9 mechanical folding extensions to a total width of 3 m (not on the rear chamfer; extension planks provided with closed storage compartment mounted transversely under the loading platform) * Preparation for 3 mounting shafts under the saddle platform for storing optional aluminum approach ramps or wood planks for wheel recess covers * Preparation for container locks on the gooseneck ----Load Securing (LaSi Package): Saddle Platform: * Perforated outer frame, angled at 45° with hole pattern for lashing points (2 t lashing force per point at minimum 480 mm spacing) * 3 x 13.4 t recessed lashing rings per side in the floor (1 on the saddle platform, 1 on the longitudinal beams after the step, and 1 above the center axle next to the longitudinal beam) Lowbed Platform: * 3 x 13.4 t lashing rings on the outer frame per side (at the step-down from the saddle platform, at the start and end of the ramp slope) * 2 x 10 t lashing rings per side (1 between the front wheel recess and 1st axle, 1 between the 2nd and 3rd axles) Iajdoykx Nkspfx Aqlet * 3 x 5 t lashing rings per side, bolted to the outer frames of the wheel recesses (2 at the front and 1 at the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest from end of last fixed axle over steering axle up to the end crossmember, continuous with internal reinforcement profile, approx. W = 770 mm x D (incomplete

Stav: nový, maximálna hmotnosť nákladu: 37 560 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-up aid for shunting purposes activated on the first axle via EBS (without truck-side installation) * Last axle as a self-steering trailing axle with electro-pneumatic steering lock * Lock for the trailing axle can be activated from the driver’s cab for shunting purposes via EBS (without truck-side installation) Iaodpfxsykx Nqj Aqlot ----Suspension: * Air suspension with lift and lowering device as well as Ride-Height Control (RtR) valve ----Electrics / Lighting: * Smart-Board infotool mounted on the trailer, with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tyre pressure monitoring system with display option in the truck via EBS signal (without truck-side installation) ----General Accessories: * Lateral underrun protection * Support legs at the front and swing-type supports at the rear of the chassis * Straight steel mudguards * Spare wheel carrier in front of the bulkhead cross member (without spare wheel) * Mechanically adjustable warning sign sets front and rear * Swing arm as holder for connection lines from truck to trailer ----Low-bed Platform: * 2nd king pin position * Fifth wheel platform with 45° chamfered front corners and a front toolbox made of galvanised, powder-coated sheet steel, W = 2,480 mm x H = 500 mm x L = 665 mm with folding lid * 400 mm high aluminium drop sides on the fifth-wheel platform (painted in desired RAL colour), foldable and removable * Rear wall -150 mm- inserted * Rear incline on the fifth wheel platform to the low bed, approx. 700 mm long with chequer plate surface and at the end a perforated strip for attaching aluminium loading ramps * Fifth wheel platform with 50 mm thick clamped wooden planks and low-bed platform with 60 mm thick clamped wooden planks * Tear plate over the axles * 9 x mechanical flip-out extensions to a total width of 3 m, but not on the rear slope (widening boards provided with enclosed storage compartment across the direction of travel under the loading area) * Prepared for 3 mounting shafts under the fifth wheel platform for storage of either aluminium loading ramps or wooden planks for wheel recess covers * Prepared for container locks on the gooseneck ----Load Securing (LaSi package): Fifth wheel platform: * Perforated outer frame, 45° angled, with hole pattern for lashing equipment (2 t lashing capacity per lashing point at a distance of min. 480 mm) * 3 x 13.4 t lashing rings sunk into the floor on each side (1 x on the fifth wheel platform, 1 x on the longitudinal members after the step, and 1 x above the middle axle next to the longitudinal member) Low-bed platform: * 3 x 13.4 t lashing rings on each side of the outer frame (1 x start of the step of the fifth wheel platform, 1 x start of the ramp slope, 1 x end of the ramp slope) * 2 x 10 t lashing rings on each side (1 x between the front wheel recess and 1st axle and 1 x between 2nd and 3rd axle) * 3 x 5 t lashing rings on each side, bolted to the outer frame of the wheel recesses (2 at the front and 1 at the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest, continuous from the end of the last rigid