Wörmann 11,9To Tandem 5M 3-S-Öl Ohne Rampen Tüv kúpiť použité (65 262)

Stav: nový, maximálna hmotnosť nákladu: 14 830 kg, celková hmotnosť: 19 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 300 mm, šírka ložného priestoru: 2 450 mm, výška ložného priestoru: 400 mm, objem nakladacieho priestoru: 6 m³, celková šírka: 2 550 mm, celková výška: 3 145 mm, Rok výroby: 2026, Výbava: ABS, Loading area 6,300 mm, 5,300 mm straight low-bed and 1,000 mm rear taper, 400 mm high drop-side aluminium panels, foldable, removable, centrally split Kinnegrip, height-adjustable drawbar 850 mm steplessly adjustable +/- 150 mm, towing eyes in accordance with DIN 50, one-piece ramps approx. 2,500 x 500 mm with perforated surface, 15–21 lashing rings per side with a tensile strength of 2t each, 2 pairs of lashing boxes front and rear with a tensile strength of 10t each, 5–7 pairs of recessed lashing brackets in the external frame depending on the load length, each with a tensile strength of 2t, aluminium side panels in arctic white, chassis in nova grey, zinc-dust paint coating, air connectors yellow/red, electrical connection 2x7-pin, folding support legs at the rear, ABS, EBS, "Gigant" axle(s), drum brake system. The vehicle may have advertising stickers and/or lettering applied. SI86656 Ledpsyi N Rcjfx Af Tshf Our offer is generally without new TÜV inspection. Should a new TÜV inspection be required, we would be happy to provide an offer from one of our partner workshops! The vehicle may have advertising stickers and/or lettering applied. Our general terms and conditions of delivery and payment apply. We are happy to prepare a financing or leasing offer for this unit. Please contact us!

Stav: nový, maximálna hmotnosť nákladu: 10 660 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 600 mm, Rok výroby: 2026, * KA-TA-R 14.4: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with display option in the truck via EBS signal—no truck-side installation required * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalizer unit * Drawbar height-adjustable by approx. 300 mm with 40 mm flange towing eye * Jost mechanical landing gear at the front * 2 mechanical folding support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted front right on chassis * 15-pin power connector * LED tail lights 12/24 V * Bolt-on underrun protection * Plastic quarter mudguards * Tie-down hooks at each central locking housing and 2 on the front bulkhead * Chassis made of fine-grained steel * Steel three-way tipper body with reinforced Strong side walls (continuous upper side panels with internal tube reinforcement—without central stanchions—side walls foldable with sidewall spring lifter) * Rear stanchions bolted * Combination steel double-wing rear doors, asymmetrically split—270° swing and lockable—not foldable—and with additional swing frame for automatic tailgate opening during tipping, rear locking via galvanized rotary lock and central locking, deactivation function for automatic tailgate when tipping backwards with open wing doors * 1 x 5 t lashing point in each corner and 4 x 3 t lashing rings recessed into the outer frame on each side * 4 mm fine-grained steel floor plate * Rear ramp rails mounting track * Reinforced body with load securing certificate * 1 pair aluminum ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment recessed under the loading area at the rear, integrated into chassis for ramps * Drawbar, underrun guard, rear stanchion, and rear folding supports hot-dip galvanized * Axles, springs, air reservoir, and landing gear painted black * Tires: 358/55 R 19.5 * Side boards painted RAL 9010 pure white * Painting of side panels in RAL color of choice available for a surcharge * Errors and prior sale excepted * Immediately available ex stock from CW 10/2026 * Sample images Ljdex Hm Rcepfx Af Tshf

Stav: nový, maximálna hmotnosť nákladu: 10 660 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 600 mm, Rok výroby: 2026, * KA-TA-R 14.4: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with display capability in the truck via EBS signal -no truck-side installation required- * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem compensation unit * Height-adjustable drawbar by approx. 300 mm with 40 mm flanged towing eye * Jost mechanical landing gear at front * 2 mechanical folding supports at rear Lsdpjx Hm Risfx Af Tjhf * Plastic toolbox approx. 750 x 350 x 300 mm on the right side of the chassis, front * 15-pin power connector * LED tail lights 12/24 V * Bolted underrun protection * Plastic quarter mudguards * Net hooks at the central locking brackets as well as 2 at the front wall * Chassis made from fine-grain steel * Steel pallet 3-way tipper body with reinforced Strong sideboards (continuous side panels on top with internal pipe reinforcement -without center stakes- foldable with sideboard spring lifter) * Rear stakes bolted * Combination steel wing doors at the rear, 2-leaf, asymmetrically split, swiveling and lockable up to 270°, not foldable, with additional pendulum frame for automatic tailgate opening during tipping process, rear lock via galvanized rotary bolt and central locking, deactivation function for automatic tailgate operation when tipping backwards with open wing door * In each corner 1 x 5 t lashing point, and 4 x 3 t lashing rings embedded in the outer frame on each side * 4 mm floor plate made of fine-grain steel * Rear mounting rail for loading ramps * Body – reinforced – with load securing certificate * 1 pair of aluminum loading ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment below the loading area rear, integrated in the chassis for the ramps * Drawbar, underrun protection, rear stake, folding supports at rear hot-dip galvanized * Axles, springs, air tanks, and landing gear painted black * Tires 358/55 R 19.5 * Sideboard coating in RAL 9010 pure white * Side wall paint in an RAL shade available at extra charge * Subject to errors and prior sale * Immediately available from calendar week 10/2026 * Sample photos

Stav: použitý, najazdené kilometre: 163 179 km, výkon: 88 kW (119,65 k), počet lôžok: 3, typ paliva: nafta, typ prevodu: automatický, farba: modrá, prvá registrácia: 05/2020, ďalšia kontrola (TÜV): 04/2025, konfigurácia náprav: 2 nápravy, emisná trieda: Euro 6, celková hmotnosť: 3 500 kg, Rok výroby: 2020, Výbava: ABS, centrálne zamykanie, klimatizácia, kúpeľňa, navigačný systém, nezávislé kúrenie, Top stav, nové vybavenie, nemecké papiere, dokumenty na 2 roky, nové TÜV pre obytné auto a nové TÜV plyn na 2 roky. Ledpjyd Tb Isfx Af Tohf

Stav: použitý, pohotovostná hmotnosť: 14 350 kg, maximálna hmotnosť nákladu: 48 650 kg, celková hmotnosť: 63 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 800 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Rok výroby: 2025, Výbava: ABS, With every used semi-trailer, you will receive a current and complete inspection and functionality report. Gooseneck: - Gooseneck in SNT design to optimize the loading deck length, length approx. 3,700 mm - Gooseneck rear with bevel approx. 1,000 mm x 10° Loading deck: - Telescopic loading deck, length approx. 8,800 mm, with rear bevel approx. 500 mm x 10° - Recess in the loading deck, including into the bevel, for accommodating the excavator dipper stick Ramps: - 1 pair of two-part steel ramps, each approx. 4,350 mm long and approx. 900 mm wide - Ramps with hardwood covering - Hydraulically foldable ramp tips - Each ramp can be hydraulically shifted approx. 235 mm outwards and approx. 215 mm inwards - Square anti-slip bars 20 x 30 mm, approx. every 200 mm on the outer frame of the ramp Axles and Suspension: - BPW axles and suspension, 1st axle with forced steering, all other axles with hydromechanical forced steering - Technical axle load: 12,000 kg - 1st axle with electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with raise and lower valve - Tires: 235/75 R 17.5 Lhjdpfsyrfn Njx Af Tjf - TPMS tire pressure monitoring system Accessories included: - Plug-in steel front wall, approx. 400 mm high - 3kW electro-hydraulic unit for controlling the hydraulic functions, excluding hydraulic cable winches - Parking position on the gooseneck for warning boards when not in use - 1 spare wheel - Outer side rail of the gooseneck with mounting holes for bolted lashing rings - First hole approx. 200 mm from the front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - 1 pair of horizontal lashing rings at the rear of the gooseneck - On the gooseneck, 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized - On the gooseneck, 1 plug-in ALU rear wall, approx. 400 mm high, anodized - Over the gooseneck approx. 40 mm thick hardwood floor, over the kingpin checker plate covering - 2" kingpin - Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide - Round NATO socket on the front connection panel - 4 wheel chocks - Mechanical landing gear with 2-speed gearbox and crank - Continuous 50 mm hardwood flooring on the loading deck, interrupted between the axles - Deck locking using conically welded locking profiles every 250 mm - Incl. pre-tensioning plate - 1 intermediate table, approx. 300 mm wide, for the telescopic tubes with large cross-section; intermediate table with stepped deck and extendable support rails for ALU bridging elements - 1 pair of lashing rings on the front cross-member - 8 pairs of recessed lashing rings in the outer frame of the loading deck, foldable outward - Extendable (galvanized) deck widenings approx. 230 mm per side - Wheel recesses with square anti-slip bars, 15 x 15 mm, continuously open in front of the axles up to the gooseneck cross-member, approx. 700 x 410 mm - ALU covers for the wheel recesses, which can also be used as bridging or widening planks for the telescopic section - ALU elements lockable on the telescopic tubes of the extensions - Widenable U-profiles for holding ALU covers - Wheel recesses with square anti-slip bars, 15 x 15 mm between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm - 1st axle with automatic lift axle function - 4 warning boards, approx. 423 x 423 mm - Radio and cable remote control

Stav: použitý, pohotovostná hmotnosť: 15 550 kg, maximálna hmotnosť nákladu: 47 450 kg, celková hmotnosť: 63 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 11/2024, dĺžka ložného priestoru: 8 800 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, Rok výroby: 2024, Výbava: ABS, For every used semi-trailer, you receive a current and complete inspection and functionality report. Gooseneck: - Gooseneck in SNT design for optimization of loading platform length, length approx. 3,700 mm - Gooseneck rear with bevel, approx. 1,000 mm x 10° Loading Platform: - Extendable loading platform, length approx. 8,800 mm, with rear bevel approx. 500 mm x 10° - A recess in the platform and in the bevel to accommodate the excavator bucket stick - Pneumatic locking system with conical locking bolts and reinforced locking positions - Hardwood covering on the platform bevel Ramps: - 1 pair of two-part steel ramps, approx. 4,350 mm long and approx. 900 mm wide - Ramps with hardwood covering - Hydraulically foldable ramp tips - Ramps can be hydraulically shifted individually approx. 235 mm outwards and approx. 215 mm inwards - 20 x 30 mm square climbing bars at intervals of approx. 200 mm on the outer frame of the ramp Axles and Suspension: - BPW axles and suspension, 1st axle self-steering, all other axles hydromechanically forced-steered - Technical axle load: 12,000 kg - Air suspension - Tires 235/75 R 17.5 - TPMS tire monitoring system - TPMS tire monitoring sensors Lsdsypb Akjpfx Af Tohf Included accessories: - Plug-in steel front wall, approx. 400 mm high - 3kW electro-hydraulic unit for controlling hydraulic functions - 1 spare wheel - Outer beam on the gooseneck with mounting holes for bolt-on lashing rings - First hole approx. 200 mm from the front, thereafter approx. every 400 mm - 2 pairs of screw-in lashing rings included - 1 pair of flat lashing rings in the rear area of the gooseneck - On the gooseneck 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized - On the gooseneck, one plug-in ALU rear board, approx. 400 mm high, anodized - 2" king pin - Round NATO socket on the front connection rail - 4 wheel chocks - Mechanical landing legs with 2-speed gearbox and crank - 1 intermediate table, approx. 300 mm wide - 1 pair of lashing rings on the front cross member - 8 pairs of recessed lashing rings in the outer frame of the loading platform, foldable outwards - Extendable (galvanized) extensions by approx. 230 mm per side - Wheel recesses with square climbing bars, 15 x 15 mm, continuously open in front of the axles up to the crossmember of the gooseneck, approx. 700 x 410 mm - ALU covers for the wheel recesses - Lockable aluminum elements mounted on the extension tubes of the widening sections - Widenable U-profiles for placing the ALU covers - Wheel recesses with square climbing bars, 15 x 15 mm between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm - Lockable aluminum elements mounted on the extension tubes of the widening sections - 1 pair of mechanical rear supports - Remote steering from front and rear via cable remote, with single-track axle monitoring - 1st axle with automatic lift axle function and starting aid according to EU Directive 2021/535 - Under the gooseneck and on the rear crossmember left and right, each with a 7-pin socket with bracket for warning plates - Square climbing bars 20 x 30 mm, approx. every 200 mm on the outer frame of the platform bevel - Central lubrication system with 1 pump, brand BEKAMAX - Radio remote control for remote steering operation, in addition to cable remote - Wabco Smart Board System - 4 warning plates, approx. 423 x 423 mm, extendable by approx. 400 mm

Stav: použitý, maximálna hmotnosť nákladu: 29 280 kg, celková hmotnosť: 36 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 05/2010, Rok výroby: 2010, Výbava: ABS, Krone 3-nápravový Dautliner Lhjdpfx Ajx S Ty Iof Tof Stav: veľmi dobrý, TÜV, pneumatiky takmer nové 90-95%, podlaha nová

Stav: použitý, najazdené kilometre: 245 600 km, prvá registrácia: 08/2002, celková hmotnosť: 28 000 kg, typ prevodu: mechanický, emisná trieda: Euro 3,

Stav: použitý, maximálna hmotnosť nákladu: 8 150 kg, celková hmotnosť: 10 500 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 10/2002, Rok výroby: 2002, Výbava: ABS, Obermaier Humer TT 10,5 tandemový nízkoložný přívěs s rampami Lhjdpfox Sbtiox Af Tef Užitečné zatížení: 8150 kg

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, pohotovostná hmotnosť: 12 100 kg, maximálna hmotnosť nákladu: 35 900 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, povolené zaťaženie nápravy (náprava 1): 10 000 kg, dovolené zaťaženie nápravy (náprava 2): 10 000 kg, povolené zaťaženie nápravy (náprava 3): 10 000 kg, prvá registrácia: 07/2015, dĺžka ložného priestoru: 13 760 mm, šírka ložného priestoru: 2 550 mm, celková dĺžka: 14 180 mm, celková šírka: 2 550 mm, celková výška: 3 630 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75R17,5, rázvor náprav: 1 310 mm, maximálna rýchlosť: 90 km/h, farba: oranžová, brzda prívesu: príves s brzdou, Rok výroby: 2015, Výbava: ABS, MEUSBURGER MTS-3 Low-loader from first owner, workshop-maintained and in very good condition! Below 400,000km. New TÜV (inspection), Optional with MAN TGX 18.440 BLS tractor unit, year 07/2015, 400,000km, available for an extra charge, 3x BPW ECO axles with air suspension, 1st axle liftable, 3rd axle as friction-steered trailing axle with electric and mechanical lock. Steering of the 3rd axle for shunting via two hydraulic cylinders, operated by remote control, Gross weight (2-axle tractor) 48,000kg, Gross weight (3-axle tractor) 57,000kg, Fifth wheel load 18,000kg, Payload (2-axle tractor) 28,500kg, Payload (3-axle tractor) 36,000kg, Lhedoyigq Rspfx Af Tef Rear axle load 30,000kg, Unladen weight 12,100kg, Overall width 2,550mm, Length, gooseneck platform approx. 4,015mm, front chamfer approx. 500x56mm, Length, lowbed platform approx. 9,750mm, rear chamfer approx. 1,000x100mm, Loading height approx. 920mm, Fifth wheel height approx. 1,120mm, Front drop-leg supports, Rear hydraulic stabilisers powered by electro-hydraulic unit of the drive-on ramps, Wheelbase 1,310 / 1,410mm, Central grease lubrication system with electric pump, LED work lights, Floor: Pressed grating 30/30/5mm (hot-dip galvanized) over the entire loading area in the lowbed, ramps, and the high platform, Ramps: Special 2-part ramps with mechanical extension, length approx. 2,850 + 1,850mm, maximum incline 8°. Ramp width approx. 800mm, can be pushed together to about 50mm in the middle. Sideways hydraulically adjustable to a total width of 2,750mm. Load capacity 25 tons. Ramp operation via hydraulic pump unit. Power supply via NATO socket, Hydraulically liftable ramp at the gooseneck approx. 3,450mm long, allowing access to the high bed across the entire vehicle width, drive-over capacity 10 tons, 5x PVC toolboxes 600/450/400mm, Electric winch ALPHA 17.5, 24 Volt, 8.0 ton pulling force, with 25m x 12mm steel cable, with hook, including cable guide window and radio remote control / plus cable remote control, Total 64 heavy-duty lashing rings (8 tons), Paint finish RAL 2002 blood orange, Tyres: 235/75R17.5: 10/10/11/11mm, 6/7/7/7mm, 9/7/8/9mm, Leasing / financing available on request – immediate processing, also without down payment! Further details and requirements on request. The vehicle description only serves the general identification of the vehicle. The information, pictures and descriptions are provided without guarantee. Equipment features may need to be checked separately. The seller assumes no liability for potential typing and data transmission errors. Errors and prior sale reserved. Thank you very much for your interest! We look forward to your visit. Our SERVICE We are happy to take your used vehicle in trade-in. 30-day export license plate including insurance, EUR-1 + all export customs documents, TÜV / SP / UVV / tachograph check / OBU installation, Professional delivery to customer location, Transfer from Stuttgart Airport / Sindelfingen train station to our site by arrangement, Retrofit of additional attachments as well as further individual customer requests possible by arrangement.

Stav: nový, maximálna hmotnosť nákladu: 23 500 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 380 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * PT 30 Profile: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lifting and lowering device including return-to-ride (RtR) valve * Smart-Board installed on trailer as info tool (for axle load display – front and rear separate) * Tyre pressure monitoring system with in-cab display via EBS signal, no installation required on the truck * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign panels front and rear * VA plastic quarter mudguards with spray protection * Rear straight galvanized steel skirts with spray protection * High-visibility reflective contour tape laterally and at the rear * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * Drawbar 1,200 mm long with 40 mm towing eye and height adjustment via traction spring & turnbuckle Lodpfx Afstplwie Tshf * Toolbox made of galvanized steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted right side * Equipment box within turntable with folding lid, 2 container locks permanently fitted (directly after turntable platform) * ROBOT-welded anti-slip surface on steel plate of the turntable platform (raised weld seams) * Load securing package (La-Si-Paket) includes: 2 lashing eyes (13.4 t) front left & right on front wall support, 1 pair each front & rear UVV lashing rings (13.4 t), 3 pairs per side of swiveling and retractable UVV lashing rings (10 t), loadable in any direction, integrated into external frame, plus 3 stake pockets per side with simultaneous 2 t lashing point * 6 pairs of mechanical folding outriggers for 3 m overall width (excluding rear slope) * Extension planks stored in centre of load area * Hydraulic one-piece access ramps approx. 3,000 x 720 mm * Mechanically adjustable laterally * 4-way hydraulic valve block for later retrofitting of hydraulic ramp shifting * Excavator arm rest spanning rear axle up to end crossmember (total length approx. 2,100 mm) * 2 pairs of lashing eyes LC 6400 daN in the excavator arm rest, positioned sideways in main frame * 2 galvanized steps at turntable, left and right * Profifix lashing rail centered lengthwise in flat area for lashing up to LC 3000 daN * Chassis, turntable, folding outriggers, drop leg supports and access ramps hot-dip galvanized * Axles, turntable ring, air tanks, and drawbar painted in black finish * Loading edge when loaded approx. 910 mm +/- 20 mm air suspension * New vehicle with manufacturer’s warranty * Errors and prior sales excepted * Available approx. from calendar week 22/2026 * Sample images

Stav: nový, maximálna hmotnosť nákladu: 23 500 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 380 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * PT 30 Profile: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lift/lower function and RtR-valve * Smart-Board infotool mounted on trailer (for axle load display – front and rear individually) * Tire pressure monitoring with display capability in the truck via EBS signal, without installation required on the truck side * Side underrun protection * Swing-out support legs at the rear of the chassis frame Lodjxptn Repfx Af Tshf * Mechanically adjustable warning sign sets at front and rear * Front axle: plastic quarter mudguards with spray protection * Rear axle: straight, galvanized steel skirts with spray protection * Reflective contour marking strips on sides and rear * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * Drawbar 1,200 mm long with 40 mm towing eye and height adjustment via draw spring & turnbuckle * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted right side * Storage box in the turntable for accessories, with hinged lid, 2 container locks permanently installed (directly after turntable platform) * ROBOT-welded anti-slip surface on the steel plate of the turntable platform (projecting weld beads) * Load securing package including: 2 lashing eyes (13.4 t) at front left & right on the bulkhead beam, 1 pair each of UVV lashing rings (13.4 t) at front & rear, and 3 pairs each side of UVV lashing rings (10 t), pivotable and lowerable, loadable in all directions and recessed in the outer frame; 3 stake pockets per side, each with 2 t lashing capability * 6 pairs of mechanical folding outriggers for 3-meter overall width (not in rear bevel) * Width boards stored centrally on the loading platform * Hydraulic one-piece loading ramps, approx. 3,000 x 720 mm * Mechanically adjustable sideways * 4-way valve block for future retrofitting of hydraulic ramp adjustment * Continuous excavator arm rest above rear axle up to end beam (total length approx. 2,100 mm) * 2 pairs lashing eyes LC 6,400 daN in excavator arm rest, mounted laterally in the longitudinal frame * 2 galvanized steps at the turntable, left and right * Profifix lashing rail in the center axis, in flat area for lashing up to LC 3,000 daN * Chassis, turntable, folding outriggers, drop legs and loading ramps hot-dip galvanized * Axles, slewing ring, air tank, and drawbar painted in black * Loading edge height approx. 910 mm +/- 20 mm with air suspension * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Available approx. from CW 22/2026 * Sample photos

Stav: použitý, maximálna hmotnosť nákladu: 7 480 kg, celková hmotnosť: 10 500 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 05/2007, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 900 mm, celková šírka: 2 550 mm, Celková hmotnosť: 10 500 kg Pohotovostná hmotnosť: 3 020 kg Užitočné zaťaženie: 7 480 kg Celková dĺžka: 6 750 mm Dĺžka ložnej plochy: 5 000 mm Šírka: celková šírka 2 550 mm / šírka korby 2 470 mm Výška nakladania: cca 900 mm Lsdpfx Asw Nu Ndjf Tohf Ďalšie informácie - 500 mm bočnice s pomocou pri zdvíhaní - sklopné, odnímateľné - Nápravy GFA - Zadná podpera - LED cúvacie svetlá - Plastový náradový box - Najazdové rampy na požiadanie za príplatok 1 150,00 € Ďalšie tandemové trojstranné sklápacie prívesy - nové aj použité - ihneď k dispozícii.

Stav: nový, maximálna hmotnosť nákladu: 8 840 kg, celková hmotnosť: 11 800 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 200 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 900 mm, celková šírka: 2 550 mm, Celková délka: 8 000 mm Délka ložné plochy: 6 200 mm včetně zadního zkosení Další informace: plus přepravní náklady / příprava ze skladu 26639 Wiesmoor: 1 280,00 € bez DPH Šířka ložné plochy: 2 480 mm Podvozek: centrální nápravový přívěs Jemnozrnná ocelová svařovaná konstrukce Vnější rám s mírným zkosením, nová verze s "Load-Lock profilem" pro uchycení upínacích pásů Pár vnějších vázacích oček v podlaze, každé 5 t 1x vpředu v rozích, 1x před a 1x v zadním zkosení 6 párů vnějších vázacích oček v podlaze/vnějším rámu, každé 5 t Opěrná noha vpředu Sklopná podpěra vzadu Klíny pod kola s držákem Boční ochrana proti podjetí – hliník Podjezdová zábrana – pozinkovaná ocel Zadní zástěrka po celé šířce (není v kombinaci s držákem na vysokozdvižný vozík) Čtvrtměsíční blatníky 1 plastová uzamykatelná skříňka na nářadí, šířka = 600 / výška = 425 / hloubka = 460 mm Tažné zařízení pro centrální nápravový přívěs Tažná oj s certifikovaným tažným okem Ø40 mm Výškově nastavitelná tažná oj pomocí šroubu, max. rozsah 300 mm Nápravy a odpružení GFA nebo BPW nápravy dle volby výrobce, s kuželíkovými ložisky a brzdou s S-cam "Laserové měření náprav/podvozku" - snížení opotřebení pneumatik a spotřeby paliva Parabolické pružiny s bezúdržbovými ocelovo-gumovými ložisky a mechanickým vyrovnáním zatížení náprav Brzdová soustava Dvouvodičová pneumatická brzdová soustava Barevné vedení hadic pro snadný servis Ruční šroubová parkovací brzda 2 nezaměnitelné spojovací hlavice vpředu s propojovacími vedeními k tahači 24 V ABS a ALB s konektorem ABS vpředu, včetně propojovacího kabelu Pozor: Přívěs smí být tažen pouze tahači, které zajišťují funkci ABS! Kola a pneumatiky 235/75 R17,5 - výrobce dle volby dodavatele Ocelová kola, tovární stříbrná Elektrická instalace 24 V, vícekomorová světla, po stranách žluté LED osvětlení 2 bílé poziční LED světla vpředu 2 bílo/červené vedení pruhu vzadu 2x 7pólové nezaměnitelné konektory vpředu vč. propojovacího kabelu Podlaha Ocelová/rýhovaná podlaha pro vysokou bodovou zátěž Poznámka: Dochází k mírnému vlnění podlahy v důsledku svařování! Délka ložné plochy cca 6 200 mm Zkosení vzadu cca 900 mm Čelo / rohové sloupky vpředu 25 mm hliníkový dutý profil, výška 400 mm Bočnice 25 mm hliníkový dutý profil, výška 400 mm, sklopné a odnímatelné Středové sloupky Bez středových sloupků Zadní stěna / rohové sloupky vzadu 1 pár ocelových sloupků připevněných k rámu s držákem pro aretaci nájezdových ramp, šířka vjezdu cca 2 430 mm Nájezdové rampy Ocelové rampy, délka 2 300 mm, šířka 510 mm, posuvné do stran s držadlem na rampách s dřevěnou výplní (špičky z oceli/rýhovaného plechu) s plynovou vzpěrou pro obsluhu jednou osobou Provozní pokyny Uvedená celková hmotnost je technicky možná; v závislosti na druhu nákladu nemusí být dosaženo celkové hmotnosti při dodržení povolených nápravových/tlakových a sedlových zatížení. (Nevhodné rozložení nákladu může způsobit špatné jízdní vlastnosti a sledování přívěsu) Země registrace/Registrační značky Německo s Dekra přejímkou a osvědčením (podle §13 EG - FGV) 24/7 servisní hotline připraveno na jednoradový držák SPZ Konturové označení reflexními pásky dle ECE R 048, bílé po stranách a červené vzadu Lakování Rám DB 7350 Novagrau Lhjdpeyl E Dqjfx Af Tof Čelo – hliník Bočnice – eloxovaný hliník Nájezdové rampy – žárově zinkované

Stav: nový, pohotovostná hmotnosť: 10 100 kg, maximálna hmotnosť nákladu: 38 900 kg, celková hmotnosť: 49 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 200 mm, šírka ložného priestoru: 2 550 mm, veľkosť pneumatiky: 245/70 R 17,5, prevádzková hmotnosť: 10 100 kg, Výbava: ABS, Chassis: - Stable welded steel frame construction with front frame drop and flat load area, rear chamfer approx. 500x100 mm - Neck section 200 mm with beveled corners - Tapered end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in the area behind rear chamfer) - 2 kingpin positions with interchangeable 2” kingpin - Outer frame closed outwards with perforated profile for lashing with tension belts (no chains possible) - Reinforced frame version / point load at center of gravity - Provisions for extendable load platform wideners - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting approx. after 2nd axle to end of vehicle - 1 pair of wheel recesses in front of axle with steel covers - (Covers with Körapur coating), depth approx. 400 mm, plus 1 pair of wheel recesses between 1st and 2nd axle with steel covers - Underrun protection = extended end plate - Drop-leg supports at rear Ramps: - 2-piece loading ramps, special design with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting equipment (only in conjunction with electro-hydraulic power pack) - Width approx. 800 mm - Wooden decking - Including traction ribs on ramps - Secured in transport position with tension belts - Operation via control lever mounted rear right in direction of travel - Sideways hydraulically adjustable Floor: - 35 mm larch wood flooring with aluminium omega profiles Landing gear: - Mechanical 24-ton landing legs, single-sided operation with compensating device Axles, steering and tires: - BPW air suspension axles, 10 t axle load each, airbag diameter 360 mm - S-cam brake 300/200 mm, asbestos-free brake pads - Automatic slack adjuster - Lifting and lowering device with total lift approx. 200 mm - 2nd drive height via ball valve +50mm - 1st axle with lifting function (wired via EBS), fully automatic control with mechanical emergency activation via button on trailer - 3rd axle as friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, center-mounted offset Lodpfx Aswviwkef Tshf - 12 tires 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring Accessories: - Removable side and rear boards on gooseneck approx. 400 mm high - Spare wheel holder - Side aluminum underride protection - 4 wheel chocks - Elongated license plate holder in end plate - 1 ECE removable sign board on the rear - 11 pairs ZK modules 10t at the sides: - 2x on the gooseneck - 9x on the load platform - Metal fenders with clear-pass - Extendable warning plates incl. 3 position lights each, front at landing legs and rear ahead of end plate, steplessly extendable up to load width of 4,500 mm - 4 sockets for warning plates storable in stake pockets on load platform - 6 pairs side stake pockets for 100x50 mm stakes - 2 crosswise rows of stake pockets for 100x50 mm stakes on gooseneck from outer frame to main frame (1 in front and 1 behind kingpin positions) - 3 crosswise rows of stake pockets for 100x50 mm stakes on load platform from outer frame to main frame (1 in front area, 1 in front of 1st axle and 1 behind 3rd axle) - 2 pairs steel plates in load platform for container locks to accommodate 1x 20ft container - Rubber apron mounted on underrun protection - Steel shot blasting, chassis hot-dip galvanized and primed - Painting of chassis/wheel hubs/outer frame in DB 7350 Novagrau

Stav: nový, pohotovostná hmotnosť: 10 700 kg, maximálna hmotnosť nákladu: 38 800 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 r 17,5, farba: sivo-čierny, Výbava: ABS, Gooseneck: •Gooseneck with beveled front corners at 45° and rear chamfer approx. 750 mm x 10° •3 pairs of lash rings •30 mm thick hardwood decking Extendable Load Platform: •Extendable load platform with rear chamfer approx. 1,000 mm x 8° •Cut-outs in the outer frame of the load platform for attaching lashing straps •Approx. 48 mm thick hardwood decking, over the axles with chequer plate covering Two-piece Steel Ramps: •One pair of galvanized, two-piece steel ramps with approx. 48 mm thick hardwood covering •Ramps with hydraulically foldable ramp sections, hydraulic lifting system, and hydraulic lateral adjustment •Maximum capacity per pair: approx. 40,000 kg Axles and Tyres: •BPW axles and suspension, 2 rigid axles, 1 trailing steering axle •Technical axle load: 12,000 kg •Electromagnetic reverse lock, activated via reverse gear and manually •Air suspension with lift and lower valve •Axle tools •235/75 R 17.5 3PMSF Braking System: •WABCO braking system according to EU regulations with EBS-E Paintwork: •First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component zinc dust primer •High-quality, single-tone 2-component topcoat in MB 7350 Novagrau •Rear section metalized and painted in RAL 9010 Landing Legs: •JOST landing gear with 2-speed gearbox for 24 t lifting capacity (50 t test load). Steel Construction: •Steel construction made from high-strength fine-grained steels •Steel grades: •S355J2+N/S355MC •S690QL/S700MC Electrical System: •Electrical system complying with EU regulations, 24 volt lighting •ASPÖCK-UNIBOX on the front connection board with 24N, 24S & 15-pin sockets Lhjdpfjhlz S Nsx Af Tjf Accessories Included: •One spare wheel with holder •One galvanized steel front wall approx. 400 mm high •Yellow-red air couplings on the galvanized front connection board •4 wheel chocks •A holder for a warning beacon at the rear of the trailer •Recess in the rear gooseneck area for ALU approach ramps •Galvanized folding supports under the chamfer of the load platform •Cover plates to bridge the gap between the ramps and the load platform •White reflective tape as per EU regulations on the sides, extension, and rear (red) •Electro-hydraulic unit at the rear, under the load platform •One holder each on the gooseneck and on each ramp, left and right, for warning signs incl. socket •Ramp control valves mounted on the right-hand side of the trailer •On the gooseneck, ALU side and rear boards approx. 2,440 x 400 mm •Rear galvanized plug-in stakes are removable (body length approx. 2,560 mm) •Four warning panels, extendable by approx. 400 mm, each with a position light •3 pairs of WADER container pockets in the platform for a 20ft, 30ft, or 40ft container •6 pairs of stake pockets (100x50 mm) in the outer frame of the load platform •Galvanized extensions, extendable by approx. 230 mm per side •20 x 20 mm square toehold strips every 200 mm on the outer frame of the platform chamfer •Sanded surface finish painted on the chequer plates, king pin, and load platform as anti-slip protection •Load gauge for determination of axle loads, including load diagram •HRM metallization (High Resistance Metallisation) of the outer frame •Complete steel structure shot-blasted, then the defined visible areas metallized with ZINACOR 850 (zinc 85% - aluminium 15%) by hot finish

Stav: nový, pohotovostná hmotnosť: 15 550 kg, maximálna hmotnosť nákladu: 47 450 kg, celková hmotnosť: 63 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 800 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck in SNT design for optimizing loading area length, approx. 3,700 mm long - Rear gooseneck with approx. 1,000 mm x 10° bevel Loading Area: - Extendable loading area, approx. 8,800 mm in length, with an approx. 500 mm x 10° bevel at the rear - A recess in the loading area and the bevel, designed to accommodate the excavator stick - Pneumatic locking with conical locking bolts and reinforced locking positions - Hardwood decking on the beveled section of the loading area Ramps: - 1 pair of two-part steel ramps, approx. 4,350 mm long and 900 mm wide - Ramps with hardwood decking - Hydraulically foldable ramp ends - Each ramp hydraulically adjustable outwards by approx. 235 mm and inwards by approx. 215 mm - Square climbing bars 20 x 30 mm, positioned approx. every 200 mm on the outer frame of the ramp Axles and Suspension: - BPW axles and suspension, 1st axle steering ahead, all other axles hydromechanically forced steered - Technical axle load: 12,000 kg - 1st axle with electromagnetic reverse lock, activated via reverse gear and also manually - Air suspension with lift and lower valve - Twin tires 235/75 R 17.5 - TPMS tire pressure monitoring system according to ECE R141 - TPMS sensors mounted on all wheels including spare wheels Accessories included: - Plug-in steel front wall, approx. 400 mm high - 3kW electro-hydraulic power unit for hydraulic operations, excluding hydraulic winches - Parking location on the gooseneck for warning panels when not in use - 1 spare wheel - On the gooseneck: 1 pair of plug-in anodized ALU side boards, approx. 400 mm high - Plug-in anodized ALU rear board on the gooseneck, approx. 400 mm high - On the gooseneck: approx. 40 mm thick hardwood decking, over the kingpin tread plate covering - 2" kingpin - Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide - 4 wheel chocks - Mechanical landing gear with 2-speed gearbox and crank - JOST Modul B – static test load = 50,000 kg - 1 intermediate table, approx. 300 mm wide - Extendable galvanised outriggers, approx. 230 mm per side - Wheel recesses with square climbing bars - ALU covers for the wheel recesses - 1 pair of mechanical rear supports - Remote steering system operable from the front and rear via cable remote control, with single-track control for axles - 1st axle with automatic lift axle function - Central lubrication system with 1 pump, brand BEKAMAX Ljdpjk Aht Uofx Af Tohf - Radio remote control for rear steering, additional to the cable remote, with 2 indicator lights on receiver for single-track control - Wabco Smart Board System - 4 warning panels, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and brackets for rotating beacon

Stav: nový, pohotovostná hmotnosť: 10 300 kg, maximálna hmotnosť nákladu: 39 200 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17.5, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading Platform: - Loading platform hydraulically liftable and lowerable after the gooseneck, length approx. 2,800 mm, with rear bevel approx. 1,000 mm x 8° - Cut-outs in the outer frame for lashing straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, checker plate flooring above the axles Two-part Steel Ramps: - One pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering - Ramps with hydraulically folding and unfolding ramp sections, hydraulic lifting mechanism, and hydraulically adjustable - Maximum load per pair: 40,000 kg Axles, Suspension & Tires: - BPW axles and suspension, 2 rigid axles, 1 trailing steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lower valve - Axle tools - Tyres 235/75 R 17.5 3PMSF Lodeu Hp Hrepfx Af Tjhf - TPMS tire pressure monitoring system according to ECE R 141 Included Accessories: - One spare wheel with holder in front of front wall - 2" kingpin - Galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on galvanized front connector rail - 4 wheel chocks - Galvanized folding supports under the rear slope of the loading platform - Bracket for beacon at the rear of the trailer - Cover plates for bridging the gap between ramps and platform - White reflective tape according to EU regulations on the trailer sides, and red at the rear - Electro-hydraulic unit at the rear under the loading platform - On the gooseneck and ramps left and right, each a bracket for warning signs, incl. socket - Control valves for ramps fitted on the right side of the trailer - European reflective plates (red-yellow) at the rear of the trailer - Manual and description on USB stick - On the gooseneck, plug-in ALU side walls and rear wall approx. 2,440 x 400 mm - Rear galvanized stake pockets are removable (body length approx. 2,560 mm) - An electric winch with radio remote control, approx. 5,400 kg lifting force, incl. 9.5 mm steel cable, 24 m long, with cable guide roller - Bolted 5t ring for rope winch cable diversion on the neck without guide pulley - 2 pairs of WADER container pockets in the platform for a 20ft container - 6 pairs of stake pockets (100 x 50 mm) in the outer frame of the loading platform - Lift axle on front axle, controlled by TEBS E, depending on current axle load and loading condition - 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN) - 1 pair of recessed lashing rings at the rear bevel along the central beam (LC 10,000 daN) - Non-slip sand coating applied on the checker plates on the gooseneck and platform - Central lubrication system BEKAMAX (Pico) with general-purpose grease NLGI-2 and removable pump guard - Four extendable warning signs, approx. 400 mm, each 423 x 423 mm - Speed restriction stickers 80 km/h on the rear and both sides - Load pressure gauge for determining axle loads, incl. load diagram - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible surfaces finished with ZINACOR 850 (zinc 85% - aluminium 15%) hot metallization

Stav: nový, pohotovostná hmotnosť: 10 900 kg, maximálna hmotnosť nákladu: 37 100 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 890 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17.5, farba: sivý, prevádzková hmotnosť: 10 900 kg, Výbava: ABS, Gooseneck: - Gooseneck in SNT design for optimizing the loading platform length, approx. 3,700 mm long, rear chamfer approx. 1,000 mm x 6° - Technical fifth wheel load: 18,000 kg Lhedpfeuadk Nsx Af Tef - For tractor units: 4 x 2 and 6 x 2 Loading Platform: - Loading platform approx. 9,600 mm long with rear chamfer approx. 900 mm x 6° - Platform behind gooseneck hydraulically liftable/lowerable, approx. 3,000 mm long, load capacity up to approx. 9,000 kg - Grating and 5 mm steel plate reinforcement on the chamfered section as additional strengthening Ramps: - One pair of two-piece AXS steel ramps, approx. 4,675 mm long, 900 mm wide - Grating surface - Hydraulically foldable ramp tips - Ramps can be hydraulically shifted individually approx. 235 mm outwards and approx. 365 mm inwards - Painted anti-slip sand-coating on ramp outer frame and ramp tip - Flashing lights mounted on ramp tips with switch next to ramp control panel - Quick-release ramp locks for securing in transport position Axles, Suspension, and Tyres: - BPW axles and suspension, 1st and 2nd axles fixed, 3rd axle self-steering - 1st axle with starting aid - Operated via brake pedal of the tractor unit - Technical axle load: 12,000 kg - Air suspension with raise/lower valve - 235/75 R 17.5 - TPMS (Tyre Pressure Monitoring System) to ECE R 141 specification - TPMS sensors fitted in all wheels, including spares Braking System: - WABCO EBS-E braking system complying with EU regulations Paintwork: - Trailer MB 7350 Nova Grey Included Accessories: - Pin-type steel front wall, approx. 400 mm high - 3 kW electro-hydraulic power unit for hydraulic operations (excluding hydraulic winches) - Gooseneck guide plate for fifth wheel, approx. 500 mm wide - JOST Modul B landing gear - static test load = 50,000 kg - Continuous grating with 5 mm steel baseplate as additional reinforcement - Painted sand-coating - Cut-outs in outer frame of platform and lift bed for attaching hydraulic ramp control valves on right side of trailer - 2" king pin - Central lubricating system with 1 pump, brand BEKAMAX - On gooseneck: 1 pair removable ALU side walls, approx. 400 mm high, anodized - Electric cable winch, approx. 5,400 kg pulling force, with radio remote control - Steel cable approx. 24 m long, diameter approx. 9.5 mm, incl. cable pressure roller - WABCO Smart Board system - 4 extendable warning boards, approx. 423 x 423 mm, extendable by approx. 400 mm

Stav: nový, pohotovostná hmotnosť: 648 kg, maximálna hmotnosť nákladu: 2 352 kg, celková hmotnosť: 3 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 3 500 mm, šírka ložného priestoru: 1 820 mm, výška ložného priestoru: 250 mm, celková dĺžka: 5 520 mm, celková šírka: 2 420 mm, veľkosť pneumatiky: 195/50R13C, brzda prívesu: príves s brzdou, Temared Builder 3 3518S 3000 kg Prepravník stavebných strojov s mrežovou rampou - NOVÉ VOZIDLO - Technické údaje: Povolená celková hmotnosť: 3000 kg Prevádzková hmotnosť: cca 648 kg Užitočná nosnosť: cca 2352 kg Vnútorné rozmery korby: 350 x 182 x 25 cm Celkové rozmery: 552 x 242 x 182 cm (DxŠxV) Pneumatiky: 195/50R13C Nakladacia výška: cca 37 cm Vybavenie a konštrukcia: Rám a platforma zvárané, žiarovo zinkované Odkladací priestor na lyžicu bagra na oji v štandarde V-oj, oporné koleso štandard Nájazdová brzda s automatickým cúvacím systémom, ručná brzda Bezúdržbové gumové nápravové jednotky Bočnice z masívnej zváranej ocele Pochôdzne bočné časti po celej dĺžke korby s perforovaným vzorom Protišmyková podlaha zo sieťotlačenej preglejky Výsuvné uchytávacie oká v rámu podlahy po bokoch Celoplošná mrežová rampa so zdvíhacími vzperami (Nové: plynové vzpery, čiastočne zobrazená pružina už nie je!) Podpera nájazdu integrovaná v rampe Elektrická inštalácia 12V, 13-polová zásuvka, cúvacie svetlo Multifunkčné svetlá chránené v bočných lištách Dodatočné svetlá chránené v prednom nosníku Vrátane nemeckého technického osvedčenia (Fahrzeugbrief) a COC Voliteľné príslušenstvo: Náhradné koleso pod odkladacou plochou na lyžicu bagra Upevňovacie popruhy Zámok proti krádeži atď. (na požiadanie) ! Omnoho viac prívesov nájdete na >>> trelex. de ! * Možnosť financovania a výkupu na protiúčet! * Široký výber: Viac ako 300 prívesov stále na sklade, príďte osobne! Lhjdpfx Afsw Namhj Tjf * Odborné a férové poradenstvo, rýchle vybavenie. * Otázky? Jednoducho zavolajte! POZOR: Okamžitý odber možný len po predchádzajúcej objednávke!

Stav: použitý, maximálna hmotnosť nákladu: 11 980 kg, celková hmotnosť: 19 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 09/2015, ďalšia kontrola (TÜV): 09/2026, dĺžka ložného priestoru: 7 550 mm, šírka ložného priestoru: 2 500 mm, výška ložného priestoru: 2 200 mm, Výbava: ABS, zdvíhacie čelo, * Vehicle number: P19076 A * 2 axles (tandem) * Full air suspension * Frigoblock EK 25U refrigeration unit * Drive/electric cooling * ABS * Body: Wüllhorst * Raising/lowering device * EBS * BÄR 2000kg tail lift * Toolbox * Disc brakes * Through-loading system * 2 evaporators * Partition wall * Movable partition wall * SAF axles * Tyres 1st axle: 385/55R22.5 * Tyres 2nd axle: 385/55R22.5 * Internal dimensions L: 7.55m W: 2.50m H: 2.20m * 2: Internal width 1.63m * 3: Internal width 0.82m * TÜV valid until 09/2026 Lodpfxoyc Aawo Af Tshf Important notice: Sale is strictly to traders or for export. These are used vehicles sold as-is – with exclusion of any liability for material defects (§ 444 BGB). Warranty and guarantee claims are excluded. Inspection and testing prior to purchase is expressly recommended. No guarantee is given for the function of special equipment and extras. Company logos or advertising shown in the photos may have been digitally altered. Errors, typos and prior sale reserved. Languages: German, English, Greek, Russian, Croatian, Italian, Spanish, French, Turkish, Romanian, and Arabic.

Stav: použitý, maximálna hmotnosť nákladu: 13 500 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 09/2010, dĺžka ložného priestoru: 5 100 mm, Int. č.: B - 07 Na zákazku pre klienta Schmitz Gotha * SKI 18 * Trojstranný sklápač * 2-nápravový * Nápravy SAF * povolená celková hmotnosť 18 000 kg * dobrý stav Možný protiúčet Financovanie od 3,99 % Chyby a medzipredaj vyhradené! Údaje v tomto inzeráte sú nezáväzné popisy a neslúžia ako zaručené vlastnosti. Predajca nepreberá žiadnu zodpovednosť za preklepy alebo chyby pri prenose údajov. Uvedené vybavenie je nutné samostatne overiť. Všetky údaje v inzerátoch sú nezáväzné! Doručenie v rámci celého Nemecka na požiadanie Otváracie hodiny: pondelok až štvrtok 9:00-17:00 Lsdpfxoxvgams Af Tjhf piatok 9:00-14:00 a podľa dohody!

Stav: použitý, maximálna hmotnosť nákladu: 5 250 kg, celková hmotnosť: 5 250 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 02/2018, dĺžka ložného priestoru: 4 000 mm, Int.-č.: B - 10 Lhodsxvf Szspfx Af Tjf Na zákazku klienta Blohmenröhr * Trojstranný sklápací príves * Dvojnápravový * Nájazdové rampy * Nastaviteľné oje * Celková prípustná hmotnosť 5250 kg * Užitočné zaťaženie cca 2250 kg * Veľmi dobrý stav Možnosť protihodnoty Financovanie od 3,99% Chyby a medzipredaj vyhradené! Údaje v tomto inzeráte sú nezáväzné popisy a nepredstavujú zaručené vlastnosti. Predajca nepreberá zodpovednosť za chyby v písaní alebo prenose údajov. Uvádzaná výbava je potrebné overiť zvlášť. Všetky informácie v inzeráte sú nezáväzné! Doručenie po celom Nemecku na požiadanie Otváracie hodiny: pondelok až štvrtok od 9:00 do 17:00 týždeň v piatok od 9:00 do 14:00 a podľa dohody!!!

Stav: použitý, maximálna hmotnosť nákladu: 10 870 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 06/2025, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2023, Výbava: ABS, * KA-TA-R 14.4: * Wabco ABS system * Emergency release device for spring brake cylinders Lhjdpjl Th Htofx Af Tsf * Drum brakes * 2 x 7 tonne Gigant axles * Parabolic suspension with tandem equalizer unit * Drawbar height adjustable by approx. 300 mm with 40 mm flange towing eye * Jost mechanical landing gear at the front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 650 x 350 x 320 mm, mounted front right side of the chassis * 15-pin electrical connector * Multi-chamber tail lights * Bolt-on underride protection * Plastic quarter mudguards * Net hooks at each position of the central locking, plus 2 on the front wall * Chassis made of fine-grain steel * Steel pallet 3-way tipper body, continuous side panels with internal tube reinforcements, drop sides without central stanchions, foldable with side wall spring lifts * Bolted rear stanchions * Combination steel wing doors at the rear, asymmetrically split 2-wing design, can pivot and lock at 270°, not foldable, with additional pendulum frame for automatic rear wall opening during tipping operation, locking via galvanized rotary rod lock at the rear and central locking, deactivation function for the automatic rear wall function when tipping backwards with the wing door open * Each corner fitted with one 5-ton lashing point, four 3-ton lashing rings recessed into the outer frame on each side * 4 mm fine-grain steel floor plate * Rear mounting rail for loading ramps * Reinforced superstructure with load securing certificate * 1 pair of aluminium loading ramps, approx. 3,570 x 410 mm (load capacity 10 tons per pair), suitable for rubber-tyred and tracked vehicles * Lockable storage compartment for ramps recessed into the chassis below the loading surface, accessible from the rear * Chassis, drawbar, underride guard, rear stanchion and folding supports at the rear hot-dip galvanized * Axles, springs, air tank, and landing gear painted in black * Tyres: 285/70 R19.5 * Side panels painted to RAL 9010 pure white * Painting of side walls in other RAL colours possible at extra cost * Vehicle has a day permit (unused) * Errors and prior sale excepted * Immediately available ex Egestorf

Stav: použitý, maximálna hmotnosť nákladu: 10 870 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 06/2025, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2023, Výbava: ABS, * KA-TA-R 14.4: * Wabco ABS * Emergency release device for spring-loaded brake cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalization unit * Height-adjustable drawbar (approx. 300 mm) with 40 mm flange towing eye * Jost mechanical landing gear at the front * Two mechanical folding support legs at the rear * Plastic toolbox approx. 650 x 350 x 320 mm mounted on the front right-hand side of the chassis * 15-pin electrical plug * Multi-chamber tail lights * Bolt-on underrun protection * Plastic quarter fenders * Lashing hooks located at the central locking bearings and 2 pieces at the front wall * Chassis made of fine-grain steel * Steel pallet three-way tipper body with continuous side walls, top edge reinforced with inner tubes, without center posts, side walls foldable with board wall spring lifting device * Rear posts bolted * Combination steel wing doors at rear; 2-leaf, asymmetrically split, can be swivelled and locked to 270°, cannot be folded – with additional pendulum frame for automatic rear wall opening during tipping; locking via galvanized rotary bolt at the rear and central locking; deactivation function for automatic rear wall opening during rear tipping with open wing door * Each corner fitted with 1 x 5 t lashing point, plus 4 x 3 t lashing rings recessed into the outer frame on each side * 4 mm steel floor made of fine-grain steel * Rear mounting rail for loading ramps * Reinforced body with load securing certificate * 1 pair of aluminum loading ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment for ramps recessed under the load floor at the rear of the chassis * Chassis, drawbar, underrun protection, rear posts, and rear folding supports hot-dip galvanized Ledpfel Th Dusx Af Tehf * Axles, springs, air tanks, and landing gear painted black * Tyres: 285/70 R19.5 * Sideboard painting in RAL 9010 pure white * Side wall painting in a RAL color of your choice available at extra cost * Vehicle has a one-day registration (not in use) * Subject to errors and prior sale * Immediately available from Egestorf