Müller-Mitteltal 14,4 To. Plateau, Luft, 3 M. Cont.- Verriegelung kúpiť použité (60 180)

Stav: nový, maximálna hmotnosť nákladu: 23 700 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * T3 Profi 30.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension with lift/lower function and RtR valve * Smart-Board as infotool * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning signs front and rear * Front axle closed plastic mudguards and rear axle straight galvanized steel skirts, each with splash guards * Reflective contour tape on sides and rear * Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform * LED tail lights * Removable rotating beacon at rear * Drawbar with 40 mm towing eye and height adjustment via drawbar spring & turnbuckle * 15-pin electrical connectors * Four stake pockets per side, each with dual 2 t lashing points * Load security package consisting of: 2 lashing eyes (6.4 t) front left & right on main frame of turntable platform, 5 pairs of UVV lashing rings, swiveling and lowerable, loadable in all directions and recessed in the outer frame – in the corners up to 13.4 t, elsewhere up to 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (not in the rear slope) * Widening planks stored in the center of the loading area * Hydraulic one-piece drive-on ramps (approx. 3,000 x 720 mm), adjustable sideways * Excavator arm trough from rear axle to rear cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings laterally in the excavator arm trough) * Loading area above turntable: approx. 1,960 x 2,520 mm * Loading height unladen approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Loading height unladen approx. 910 mm (incl. 860 mm approach angle) * Chassis, turntable, drawbar, folding extensions & ramps hot-dip galvanized * Axles, turntable, air tanks, etc. painted in black * Tires: 235/75 R 17.5 * Payload approx. 24,000 kg at 30,000 kg GVW * New vehicle with manufacturer warranty * Subject to errors and prior sale * Available from approx. CW 32 / 2026 * Sample images Gbodpfxsl Tpwyo Amgel

Stav: nový, maximálna hmotnosť nákladu: 23 830 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles Gjdol Thxdspfx Amgebl * Parabolic springs * Mechanical axle compensation at rear * Lateral underrun protection * Swing-type support legs at rear on chassis frame * Mechanically adjustable warning panel sets at front and rear * Front axle with enclosed plastic mudguards, rear axle with straight, hot-dip galvanized steel fenders, each with splash guards * Side and rear contour marking tape, reflective * Hinged cover (hot-dip galvanized) for toolbox on the turntable platform * Multi-voltage system * LED taillights * Removable beacon at rear * Drawbar with 40 mm towing eye and height adjustment via drawbar spring & turnbuckle * 15-pin power connector * Four stake pockets per side (stakes not included), each also with lashing option * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on main frame of turntable platform, 5 pairs of UVV-compliant lashing rings, swivel-mounted and lowerable, loadable in all directions and recessed in outer frame – 13.4 t capacity at corners, otherwise 10 t. * 6 pairs of mechanical swing-out outriggers for total width of 3 meters (not at rear slope) * Widening planks stored in center of loading area * Excavator boom support over rear axle up to end crossmember approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the support) * One-piece hydraulic loading ramps (approx. 3,000 x 720 mm) * 4-section valve block for future retrofitting of hydraulic ramp adjustment * Mechanical lateral ramp adjustment * Loading area above kingpin: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Technically permitted gross weight up to 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex works Egestorf

Stav: nový, maximálna hmotnosť nákladu: 23 830 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW ECO axles * Parabolic springs Gbjdpfx Amox Ipbgegsl * Mechanical axle equalization at the rear * Lateral underride protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle with closed plastic mudguards, rear axle with straight, galvanized steel skirts, each fitted with splash protection * Retroreflective contour markings on the sides and rear * Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform * Multi-voltage electrical system * LED tail lights * Removable beacon at the rear * Towing bar with 40 mm towing eye and height adjustment via tension spring and turnbuckle * 15-pin electrical connector * Four stake pockets on each side (no stakes included), each can also be used for lashing * Load securing package comprising: 2 lashing eyes (6.4 t) front left and right on the main frame of the turntable platform, 5 pairs of UVV-compliant lashing rings, hinged and lowerable, loadable in all directions, integrated into the outer frame - in the corners rated for 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3m total width (not in the rear taper) * Widening planks stowed in the middle of the loading area * Excavator stick rest above the rear axle up to the end cross member, approx. 2,100 mm long (2 pairs 6.4 t lashing rings at the sides in the excavator stick rest) * Single-section hydraulic loading ramps (approx. 3,000 x 720 mm) * Hydraulically adjustable side ramp shift * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm approach slope) * Chassis, turntable, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * Unladen weight 5,900 kg * --Permissible gross weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from approx. CW 36/2026

Stav: nový, maximálna hmotnosť nákladu: 23 830 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 Profile 30.0: * EBS brake system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring-loaded cylinders * Drum brakes Gbedox Ipb Hspfx Amgol * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalizer * Side underrun protection * Rear swivel supports on the chassis frame * Mechanically adjustable warning sign assemblies front and rear * Closed plastic mudguards at the front axle and straight galvanized steel skirts at the rear axle, each with spray protection * Reflective contour tape on sides and rear * Folding lid (hot-dip galvanized) for the toolbox on the bogie platform * Multi-voltage system * LED tail lights * Rotating beacon (removable) at the rear * Drawbar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin electrical connector * Four stake pockets per side (no stakes included) with integrated lashing options * Load securing package consisting of: 2 lashing rings (6.4 t) front left & right on the main frame of the bogie platform, 5 pairs of UVV-compliant swivelable and lowerable lashing rings—loadable in all directions and recessed in the outer frame—13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (not at the rear chamfer) * Widening planks stored centrally on the loading area * Excavator arm rest above the rear axle to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the excavator arm rest) * Single-piece hydraulic access ramps (approx. 3,000 x 720 mm) * Hydraulic lateral ramp adjustment * Platform above turntable: approx. 1,960 x 2,520 mm * Loading height unladen: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Loading height unladen: approx. 910 mm (including 860 mm access slope) * Chassis, bogie, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted black * 235/75 R 17.5 twin tires * Empty weight: 5,900 kg * --technically permissible gross weight: 30,000 kg-- * Vehicle is galvanized * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Available from approx. CW 36/2026 *

Stav: nový, maximálna hmotnosť nákladu: 23 830 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 Profil 30.0: * EBS braking system * TPMS tire pressure monitoring * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning panel sets at front and rear * Front axle: closed plastic fenders / Rear axle: straight, galvanized steel skirts, each with splash guards * Reflective contour tape on sides and rear * Folding lid (hot-dip galvanized) for tool box on turntable platform * Multi-voltage system * LED rear lights * Rotating beacon (removable) at rear * Tow bar with 40 mm eye and height adjustment via traction spring & turnbuckle * 15-pin electrical connector Gbodpfel Th Adox Amgol * 4 stake pockets on each side (no stakes provided) with integrated lashing points * Load securing package (La-Si-Paket) consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 5 pairs of swivel and lowerable UVV lashing rings, loadable in all directions and recessed in the outer frame – in the corners 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not included at rear chamfer) * Deck planks for widening stored at center of loading area * Excavator arm storage over rear axle up to end cross member, approx. 2,100 mm length (2 pairs of 6.4 t lashing rings at the sides in the excavator arm compartment) * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) * 4-way valve block for future retrofitting of hydraulic ramp shifting * Mechanical lateral ramp displacement * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm run-up slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black tone * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Technically permissible gross weight of 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 23 700 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * T3 Profi 30.0: * Wabco EBS-E (electronic braking system) * TPMS (Tire Pressure Monitoring System) * Emergency release mechanism for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension, raising and lowering, with RtR valve * Smart-Board as infotool * Side underrun protection * Swing-out supports at the rear on the chassis frame * Mechanically adjustable warning panel sets front and rear * Front axle: enclosed plastic mudguards; rear axle: straight galvanized steel mud flaps with spray protection * Reflective conspicuity tape on the sides and rear * Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform * LED tail lights * Rotating beacon (removable) at the rear * Drawbar with 40 mm towing eye and height adjustment via tension spring and turnbuckle * 15-pin electrical plug Gbodpfjl Tq Euex Amgsl * Four stake pockets per side, each with simultaneous 2 t lashing capability * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left and right on the main frame of the turntable platform; 5 pairs of UVV lashing rings, pivotable and lowerable, loadable in all directions and recessed in the outer frame – in the corners 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (excluding rear taper) * Extension planks stored in the center of the load area * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm), laterally adjustable * Excavator arm rest above rear axle up to end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm rest) * Load area above turntable: approx. 1,960 x 2,520 mm * Loading height unladen: approx. 1,070 mm * Rear load area: approx. 6,500 x 2,520 mm * Loading height unladen: approx. 910 mm (incl. 860 mm drive-up slope) * Chassis, turntable, drawbar, folding extensions & loading ramps hot-dip galvanized * Axles, turntable, air tanks etc. painted in black * Tyres 235/75 R 17.5 * Payload approx. 24,000 kg with 30,000 kg gross weight * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from approx. week 32/2026 * Sample images

Stav: použitý, maximálna hmotnosť nákladu: 6 000 kg, celková hmotnosť: 8 800 kg, konfigurácia náprav: 1 náprava, prvá registrácia: 04/2026, Výbava: ABS, * Müller Mitteltal KWH 8.8 ML Cable Transport Trailer * AS NEW and available * Inquiry number: 11652 * TPMS Tire Pressure Monitoring System * EBS brake system, drum brakes, BPW axle, parabolic springs * Front landing gear, spring-assisted square tube supports at the rear with baseplate; safety locking pins for adjustable support heights * Drawbar with 40 mm towing eye (height adjustable) * 15-pin power connector Gbjdpfsy R Hx Usx Amgel * LED lighting * 315/80 R 22.5 tires, fully enclosed steel fenders * Swiveling cable drum mounting * Steel drum shaft, 76 mm diameter with centering and rotatable ends * 1 pair of polyamide centering cones, stepped design * For drums with 800-3,000 mm diameter x 1,700 mm width between drum arms * Equipped with tension lock for drum securing at the ends of the support arms and locking of the cable drum mount to the chassis with a centrally positioned claw lock * Motor-hydraulically operated pull and push cylinders with pipe break protection. Control valve with automatic neutral position, pressure relief valve, and lowering throttle. Hydraulic system connectors, hoses, and pipes in NW 13. * Drum drive, motor-hydraulic, with oil motor, valves, and rubber-coated drive rollers (adjustable). Hydraulic speed controller and brake for drum drive. * Also includes hydraulic pump unit with Hatz 1B30 Silent diesel engine and manual starter, 6.5 HP (150 bar), pressure supply optionally via truck hydraulics or pump unit by switching connections * Toolbox approx. 500 x 350 x 400 mm * Chassis with hot-dip galvanized drawbar * Advertising space integrated in side protection, external polyester coating in RAL white * ----as-new condition (used for only 1 project) * ---- * Financing possible through our partners with or without down payment, residual value options, and various terms. Contact us for an offer! * We are official Müller Mitteltal dealer! * Example hire purchase through our partner FM LeasingPartner from just €595,- net/month over 60 months (no down payment, zero final payment). * Contact us for a quote! ---- * Our opening hours * Monday - Thursday: 08:00 - 17:00 * Friday: 08:00 - 15:00 * Outside of business hours, appointments can be arranged * Wir sprechen deutsch, we speak English, ????? ?? ????? ?????, mowimy po polsku, on parle francais ----

Stav: použitý, maximálna hmotnosť nákladu: 6 000 kg, celková hmotnosť: 8 800 kg, konfigurácia náprav: 1 náprava, prvá registrácia: 05/2026, Výbava: ABS, * Müller Mitteltal KWH 8.8 ML Cable Transport Trailer * AS NEW and available * Reference number for inquiries: 11652 * TPMS Tire Pressure Monitoring System * EBS braking system, drum brakes, BPW axle, parabolic leaf springs * Front support winch, rear spring-assisted square tube supports with base plate, safety locking pins for adjustable support heights * Drawbar with 40 mm towing eye (height-adjustable mm) * 15-pin electrical connector * LED lighting * 315/80 R 22.5 tires, enclosed fenders made of steel sheet * Swiveling cable drum mount * Steel drum shaft with 76 mm diameter, with centering and rotating ends * 1 pair of polyamide centering cones, graduated * For drum diameter 800–3,000 x (1,700 mm width between drum arms) * With locking system for drum securing at the carrier arm ends, as well as central claw lock securing the cable drum mount to the chassis * Motor-hydraulic pull and push cylinders with pipe rupture safety. Control valve with automatic neutral position, pressure relief valve, and lowering throttle. Hydraulic system plugs, hoses, and pipes in NW 13. * Drum drive motor-hydraulic with oil motor, valves, and rubber-coated drive rollers (adjustable). Hydraulic speed regulator and brake for drum drive. Gjdsy Rb Tyepfx Amgsbl * Including power pack with hydraulic Hatz 1B30 silent diesel engine and hand starter, 6.5 HP (150 bar), power supply selectable via switching the connection lines between truck hydraulics or the power unit * Toolbox approx. 500 x 350 x 400 mm * Chassis with galvanized drawbar * Advertising surface integrated within the side guard, exterior polyester-coated in RAL white * ---- as-new condition (used only for 1 project) * ---- * Financing available through our partners, with or without down payment or residual value, and various terms possible. Request a quote from us! * We are Müller Mitteltal authorized dealers! * Example leasing offer from our partner FM LeasingPartner from as little as EUR 515/month net on a 72-month term (no down payment, zero residual value). * Request a quote from us! ---- * Our opening hours * Monday to Thursday: 08:00 - 17:00 * Friday: 08:00 - 15:00 * Outside these hours, appointments are available upon request * Wir sprechen Deutsch, we speak English, ????? ?? ????? ?????, mowimy po polsku, on parle français

Stav: použitý, konfigurácia náprav: 2 nápravy, celková šírka: 25 000 mm, celková výška: 40 000 mm, Rok výroby: 2014, Výbava: ABS, Na otázky ohľadom vozidla Vám rád odpovie pán Seidel (telefonicky). MÜLLER MITTELTAL SF32BM/BT auto-nadstavba na betón Nadstavba: Liebherr HTM 1004 10m³, BPW nápravy, bubnové brzdy, pružinové zásobníky, Wabco ABS, 1. náprava zdvíhacia, vzduchové odpruženie, prípustná celková hmotnosť: 32.000 kg, pohotovostná hmotnosť: 6.510 kg, užitočné zaťaženie: 25.490 kg, dezén pneumatík: 1. náprava 14-15 mm, 2. náprava 10 mm Na požiadanie Vám pripravíme ponuku na leasing alebo financovanie. Pán Seidel Vám ochotne poradí telefonicky. Ďalšie informácie nájdete na našej domovskej stránke. Gbjdpfx Amoyfu Sdsgsl ... Chyby, zmeny a medzipredaj vyhradené!!! = Ďalšie informácie = Celková prípustná hmotnosť: 32.000 kg Pre ďalšie informácie kontaktujte pána Tobiasa Eberta.

Stav: nový, maximálna hmotnosť nákladu: 6 870 kg, celková hmotnosť: 9 900 kg, konfigurácia náprav: 1 náprava, Rok výroby: 2026, * KWH 9,9 ML: * RDÜ Tire Pressure Monitoring System * EBS braking system * Drum brakes * BPW axle Gedpfxeu I Iqxs Amgsbl * Parabolic springs * Front support winch * Spring-assisted square tube supports at the rear with base plate and safety locking pins for various support heights * Drawbar with 40 mm screwed towing eye (height adjustable in mm) * 15-pin electrical connector * LED lighting * Flashing LED side marker lights * Chassis made of torsion-resistant square tubes and cross beams * Enclosed fenders made of sheet steel with splash guards * Closed side underrun protection usable as advertising surface * Plastic toolbox with base insert (installed lying down) approx. 500 x 350 x 400 mm * Swivelling cable drum superstructure, clear width between drum arms 1,700 mm – with tension lock for securing the drum at the support arm ends, as well as central claw locking mechanism for securing the cable drum superstructure to the chassis * Motor-hydraulic drum drive with oil motor * Valves and adjustable, rubber-coated drive rollers * Hydraulic speed regulator and brake for drum drive * Steel drum shaft with 76 mm diameter, centering and rotating ends * 1 pair of polyamide centering cones, stepwise offset * Hydraulic pump unit with diesel engine * Fuel tank and hand starter * 6.5 HP with gear pump (150 bar) * Finish: hot-dip galvanized * New vehicle with full manufacturer's warranty * Errors and prior sale excepted * Immediately available from Egestorf

Stav: nový, maximálna hmotnosť nákladu: 6 870 kg, celková hmotnosť: 8 800 kg, konfigurácia náprav: 1 náprava, Rok výroby: 2026, * KWH 9.9 ML: * RDÜ Tire Pressure Monitoring System * EBS Brake System * Drum Brakes * BPW Axle * Parabolic Springs * Manual Landing Gear (front) * Spring-assisted square tube supports at rear with base plate, securing pins for multiple support heights * Drawbar with 40 mm bolt-type towing eye (height-adjustable, mm) * 15-pin electrical connector * LED lighting * Flashing LED side marker lights * Chassis constructed from torsion-resistant square tubing with cross members * Enclosed steel mudguards with splash protection * Enclosed side underrun protection, usable as advertising space * Plastic toolbox with floor insert (horizontal installation), approx. 500 x 350 x 400 mm * Swivel-mounted cable drum frame, clear width between drum arms 1,700 mm, with tension lock for securing drum at arm ends and a centrally positioned claw lock to secure the cable drum frame to the chassis Gedpfx Amsu I Iqlegsbl * Motor-hydraulic drum drive with hydraulic motor * Valves and adjustable rubber-coated drive rollers * Hydraulic speed controller and brake for drum drive * Steel drum shaft, 76 mm diameter, with centering and rotatable ends * 1 pair of stepped centering cones made of polyamide * Hydraulic power unit with diesel engine * Fuel tank and hand starter * 6.5 HP with gear pump (150 bar) * Finish: hot-dip galvanized * New vehicle with full manufacturer warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 6 870 kg, celková hmotnosť: 9 900 kg, konfigurácia náprav: 1 náprava, Rok výroby: 2026, * KWH 9.9 ML: * TPMS (Tire Pressure Monitoring System) * EBS braking system * Drum brakes * BPW axles * Parabolic leaf springs * Front landing gear * Spring-assisted square tube supports at the rear with base plate, safety locking pins for variable support heights * Drawbar with 40 mm screwed towing eye (height-adjustable ___ mm) * 15-pin electrical connector * LED lighting * Flashing LED side marker lights * Chassis constructed from torsion-resistant square tubes and cross-members * Closed steel mudguards with splash protection * Closed lateral underrun protection usable as advertising space * Plastic toolbox with base insert (installed lying down) approx. 500 x 350 x 400 mm * Swiveling cable drum mounting, usable width between drum arms: 1,700 mm; with tension lock to secure the drum ends on the supporting arms as well as a central claw lock to secure the cable drum mounting to the chassis * Motor-hydraulic drum drive with hydraulic motor Gedpfx Amou I Iqrjgobl * Valves and movable, rubber-coated drive rollers * Hydraulic speed controller and brake for the drum drive * Steel drum shaft with 76 mm diameter, centering and rotatable ends * 1 pair of polyamide centering cones, stepped * Hydraulic power pack with Loncin gasoline engine, including manual and electric starter * Fuel tank and hand starter * 13 HP with gear pump (150 bar) * 315/80 R 22.5 tires * Curb weight 2,690 kg * Vehicle is hot-dip galvanized * New vehicle with full manufacturer's warranty * Errors and prior sale excepted * Immediately available from Egestorf

Stav: nový, maximálna hmotnosť nákladu: 6 870 kg, celková hmotnosť: 9 900 kg, konfigurácia náprav: 1 náprava, Rok výroby: 2026, * KWH 9.9 ML: * RDÜ Tire Pressure Monitoring System * EBS braking system * Drum brakes * BPW axle * Parabolic leaf springs * Front support winch * Spring-assisted square tube supports at the rear with base plates, safety locking pins for various support heights * Drawbar with 40 mm bolted towing eye (height-adjustable mm) * 15-pin power connector * LED lighting * Flashing LED side marker lights * Chassis constructed from torsion-resistant square tubes and cross members * Enclosed steel mudguards with splash protection * Enclosed side underrun protection that can be used as an advertising surface * Plastic toolbox with base insert (horizontal installation) approx. 500 x 350 x 400 mm * Swiveling cable drum superstructure; clear width between drum arms 1,700 mm; with clamp lock for drum securing at the carrier arm ends and a central claw lock securing the cable drum superstructure to the chassis * Motor hydraulic drum drive with oil motor * Valves and adjustable, rubber-coated drive rollers * Hydraulic speed controller and brake for drum drive * Steel drum shaft with 76 mm diameter, centering, and rotating ends * 1 pair of polyamide centering cones, stepped in stages * Hydraulic power pack with diesel engine * Fuel tank and manual starter * 6.5 HP with gear pump (150 bar) Gbodeu I Iq Eepfx Amgel * Hot-dip galvanized finish * New vehicle with full manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf * Sample images

Stav: nový, maximálna hmotnosť nákladu: 6 870 kg, celková hmotnosť: 9 900 kg, konfigurácia náprav: 1 náprava, Rok výroby: 2026, * KWH 9.9 ML: * RDÜ Tire Pressure Monitoring System * EBS brake system * Drum brakes Gbjdpfx Aju I Iqfemgel * BPW axle * Parabolic leaf springs * Front support winch * Rear square tube supports with spring assistance and base plates, safety locking pins for multiple support heights * Drawbar with 40 mm screw coupling eye (height adjustable) * 15-pin electrical connector * LED lighting * Flashing LED side marker lights * Chassis made from torsion-resistant square tubing and cross members * Enclosed steel mudguards with spray protection * Enclosed lateral underrun protection, can be used as advertising space * Plastic toolbox with floor insert (horizontal installation) approx. 500 x 350 x 400 mm * Swivelling cable drum mount, clear width between drum arms 1,700 mm, with tension lock for securing the drum at the ends of the support arms and a central claw lock for securing the drum mount to the chassis * Motor-hydraulic drum drive with oil motor * Valves and adjustable, rubber-coated drive rollers * Hydraulic speed regulator and brake for drum drive * Steel drum shaft with 76 mm diameter, with centring and rotating ends * 1 pair of stepwise recessed polyamide centring cones * Hydraulic pump unit with Loncin petrol engine, including manual and electric starter * Fuel tank and manual starter * 13 HP with gear pump (150 bar) * 315/80 R 22.5 tyres * 2,690 kg unladen weight * Vehicle is hot-dip galvanized * New vehicle with full manufacturer's warranty * Subject to errors and prior sale * Immediately available from Egestorf * Sample images

Stav: nový, maximálna hmotnosť nákladu: 16 500 kg, celková hmotnosť: 21 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, Výbava: ABS, zdvíhacie čelo, Müller-Mitteltal ETÜ-TAR 21 Tandem - Low Loader | Drive-Over Flatbed Trailer Ref. No. for enquiries: 11630 – Vehicle available immediately ex-stock Alsdorf NEW VEHICLE incl. COC Gbjdpfxjyvxg Ue Amgel * Gross weight: 21t, Payload: 16.50t, galvanized chassis * Flatbed version with 400mm high front wall, ramp safety via ramp support bar and diagonal bracing * 21t version with reinforced frame and axles, axle spacing 1,810 mm * Deck height approx. 910 mm loaded / approx. 940 mm unloaded * 7m loading area with 400 mm high front wall * Extended ramps: 3m, hot-dip galvanized one-piece ramps with galvanized grating * Ramp lift with vertically mounted, adjustable springs for easy single-person operation * Load securing package: – 4 x UVV drop lashing brackets (LC 8,000 daN) mounted to existing hole pattern in the 45° outer frame, positioned approx. 1m from front/rear cross-member – 10 x UVV retractable lashing brackets LC 3,000 daN in existing hole matrix in the outer frame – 2 x UVV lashing rings each recessed at the front and rear in the cross-member, LC 10,000 daN – Further lashing options through holes (Ø 50 mm, LC 1,200 daN) in the front and rear cross-member * Prepared for retrofitting container locks (container locks available and offered at extra charge) * 50mm thick softwood floor * Gigant air suspension axles incl. EBS 2S/2M, lifting and lowering * 235/75R 17.5 (8 units) dual tires with tire pressure monitoring sensor * Plastic toolbox mounted in front of the front panel, right in direction of travel * LED lighting system * 7-pin socket at the rear, connects to overlength lighting with rear light (58R) and ground * 2 LED reversing lights at the rear * Flashing side marker lights * Oversize warning panel * 1 removable LED beacon incl. mounting bracket and installation * Foldable rear supports, front support leg with gear winch --- Sample hire purchase offer from our partner MMV Leasing: €665/month net for 60 months with no down payment and zero residual value Other terms with/without down payment / residual values possible! We are a Müller-Mitteltal trading partner --- Our opening times * Monday – Thursday: 08:00 – 17:00 * Friday: 08:00 – 15:00 * Outside these hours, we are available by appointment * we speak German, English, Russian, Polish, French * WhatsApp

Stav: použitý, pohotovostná hmotnosť: 8 800 kg, maximálna hmotnosť nákladu: 31 200 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 04/1996, dĺžka ložného priestoru: 10 000 mm, šírka ložného priestoru: 2 510 mm, výška ložného priestoru: 1 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75R17.5, farba: červená, najazdené kilometre: 1 001 km, typ prevodu: iný, kabína vodiča: iný, Miesto vozidla: Bovenden, 4 nápravy, otočný záves, listové odpruženie, rozšíriteľný na 3 m, upevňovacie oká, dvojdielne najazdové rampy, hydraulické rampy, zadná podpera, bočná hliníková ochrana, dvojmontáž pneumatík, úložný box. Nadstavba: 4-nápravový nízkoložný príves s hydraulickými dvojdielnymi rampami. Nakladacia výška cca 900 mm. 4x 10t náprava SAF, bubnové brzdy, ťažné oko 40 a 50 mm! Dĺžka horného plošiny cca 2900 mm! Dĺžka dolného plošiny cca 7100 mm! ÚDAJE O PRÍSLUŠENSTVE BEZ ZÁRUKY, zmeny, medzi-predaj a omyly vyhradené! Gbjdpfoywvhrox Amgjl

Stav: nový, maximálna hmotnosť nákladu: 30 080 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * T4 RM 40.0: * Wabco EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Tire pressure monitoring with in-cab display via EBS signal (no truck-side installation required) * Drum brakes * 4 x 11 t Gigant axles * Air suspension with manual lowering at the rear Gbedpfx Ajxmpydomgol * Warning sign packages front & rear * SmartBord info tool installed with pressure sensors for total axle load display per axle group * Reflective contour tape on sides and rear * LED beacon (removable) at rear * 15-pin power connector * LED tail lights * Straight drawbar with 50 mm towing eye and continuously variable height adjustment * Closed single plastic fenders at front * Straight steel mudflaps at rear, each with spray suppression * Side underrun protection * Front extension ahead of turntable platform approx. 520 mm with 45° corners and 3 storage compartments incl. lockable folding lids (lids open to the rear) * Chassis made of high-strength fine-grain steel * Floor above turntable platform made of 50 mm coniferous wood, in low-bed platform made of 60 mm coniferous wood * Outer planks of the loading ramps made of 50 mm hardwood * Load securing package consisting of: 2 lashing eyes 6.4 t at front left and right on main frame of turntable platform, laterally front and rear each 1 pair of 13.4 t lashing rings on outer frame, plus 1 pair per side of 10 t swiveling and lowerable lashing rings, loadable in all directions and recessed in outer frame, screwed-on 5 t lashing rings to outer frames of wheel recesses (2 at each front recess, 1 at each rear), 2 pairs of 6.4 t lashing rings laterally in excavator arm holder * 11 pairs of folding outriggers for 3 m overall width (not in rear slope) * Storage compartment (L = 2,470 x W = 570 x H = 250 mm) for extension planks, made of sheet steel, mounted transversely to the loading platform in front of the first rear axle * Excavator arm holder above the rear axle up to the end of the drive-on slope, approx. 2,300 x 740 x 190 mm * 2 wheel recesses per side, approx. 640 mm wide — front: 340 mm deep, rear: 220 mm deep — with sliding covers (storage for covers at front on turntable platform) for transporting wheel loaders with a wheelbase of 3,100 – 3,640 mm * Mechanical drop-down supports at the rear * Hydraulic folding ramps with hydraulically deployable ramp tips, approx. 4,650 x 720 mm * Hydraulic sideways ramp adjustment * Loading area above turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm; loaded loading height approx. 890 mm ± 20 mm (incl. 860 mm drive-on slope) * Chassis, bogie, folding outriggers, rear drop-down supports, and loading ramps hot-dip galvanized * Axles, air tanks and drawbar painted black * Tires: 235/75R17.5 * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 30 080 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * T4 RM 40.0: * Wabco EBS-E (elektronický brzdový systém) * Núdzové uvoľňovacie zariadenie pre pružinové brzdové valce * Monitorovanie tlaku v pneumatikách s možnosťou zobrazenia v kabíne nákladného vozidla cez EBS signál – bez potreby inštalácie na strane nákladného vozidla * Bubnové brzdy * 4 x 11 t Gigant nápravy * Vzduchové odpruženie so zadným manuálnym znížením podvozku * Varovné tabuľové balíky vpredu a vzadu * SmartBord infotool s tlak. senzormi pre zobrazenie celkovej zaťaženosti náprav podľa skupiny * Bočné a zadné reflektujúce kontúrové pásky * Odnímateľné zadné LED výstražné svetlo * 15-pólová elektrická zástrčka * LED koncové svetlá * Priamy ťažný oje s 50 mm okom a plynule nastaviteľnou výškou * Predné kryté plastové jednostranné blatníky * Zadné rovné oceľové blatníky so zásterkami (potlačenie rozstrekovania vody) * Bočná ochrana proti podjazdu Gedjxmpykspfx Amgsbl * Predĺžený predok podvozku pred točňovou plošinou cca 520 mm s 45° rohmi a 3 odkladacími priestormi vrátane uzamykateľných výklopných viek (otváranie smerom dozadu) * Podvozok z vysokokvalitnej jemnozrnnej ocele * Podlaha nad točňovou plošinou z 50 mm a na nízkoplošinovej časti z 60 mm smrekového dreva * Vonkajšie dosky nájazdových rámp z 50 mm tvrdého dreva * Paket zabezpečenia nákladu: 2 viazacie úchyty 6,4 t vpredu vľavo a vpravo na hlavnom ráme točňovej plošiny, po jednom páre 13,4 t viazacích ok po bokoch vpredu a vzadu na vonkajšom ráme, po jednom páre 10 t sklopných a výškovo nastavitelných viazacích ok po bokoch (vyťažené vo všetkých smeroch a zapustené do vonkajšieho rámu), na ráme blatníkov skrutkované 5 t viazacie oká (pri prednom blatníku vždy 2 ks a pri zadnom 1 ks), 2 páry viazacích ok 6,4 t po bokoch v priestore pre rameno bagra * 11 párov vyklápacích rozšírení pre celkovú šírku 3 m (nie na zadnej šikmine) * Úložný priestor (L = 2 470 x B = 570 x H = 250 mm) na rozširovacie dosky z oceľového plechu naprieč ložnou plochou pred prvou zadnou nápravou * Priestor pre rameno bagra nad zadnou nápravou až po koniec nájazdovej šikminy cca 2 300 x 740 x 190 mm * Na každej strane 2 blatníkové výrezy cca 640 mm široké – predný 340 mm hlboký, zadný 220 mm hlboký – s výsuvným krytom (úložisko krytov vpredu na točňovej plošine) pre prepravu kolesových nakladačov s rázvorom 3 100 – 3 640 mm * Mechanické podpery vzadu * Hydraulické sklápacie rampy s hydraulicky výklopným špicom cca 4 650 x 720 mm * Hydraulicky nastaviteľné postranné rampy * Ložná plocha nad točňou: cca 2 990 x 2 520 mm * Zadná ložná plocha: cca 6 780 x 2 520 mm, nakladacia výška zaťažená cca 890 mm +/- 20 mm (vrátane 860 mm nájazdovej šikminy) * Podvozok, točňa, vyklápacie rozšírenia, zadné podpery a nájazdové rampy žiarovo zinkované * Nápravy, vzduchojem a ťažné oje lakované na čierno * Pneumatiky: 235/75R17.5 * Vozidlo je žiarovo zinkované * Nové vozidlo so zárukou výrobcu * Zmeny a predaj vyhradené * K okamžitému odberu v Egestorfe

Stav: nový, maximálna hmotnosť nákladu: 23 830 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 profil 30,0: * EBS brzdový systém * RDÜ systém kontroly tlaku v pneumatikách * Nouzové odpojení pro válce s perovým akumulátorem * Bubnové brzdy * 3 x 11 t BPW Eco nápravy * Parabolické pružiny Gbsdpfjx Ipa Nox Amgel * Mechanické vyrovnání náprav vzadu * Boční ochrana proti podjetí * Otočné podpěry vzadu na rámu podvozku * Mechanicky nastavitelné varovné tabule vpředu a vzadu * Přední uzavřené plastové blatníky a rovné zadní pozinkované ocelové kryty s ochranou proti odstřikování * Konturovací páska po stranách a vzadu, reflexní * Výklopné víko (žárově zinkované) na skříňku na nářadí v platformě podvozku * Multinapěťová instalace * LED zadní světla * Výstražné světlo (odnímatelné) vzadu * Tažná oj s okem 40 mm a nastavitelnou výškou pomocí tažné pružiny a napínáku * 15-pólová elektrická zásuvka * Po stranách vždy 4 kapsy na kolíky (bez kolíků), současně možnost zajištění nákladu * Balíček zajištění nákladu (La-Si) obsahuje: 2 oka (6,4 t) vpředu vlevo a vpravo na hlavním rámu platformy, 5 párů UVV otočných a sklopných vázacích ok, zatížitelných ve všech směrech a zapuštěných do vnějšího rámu – v rozích 13,4 t, jinak 10 t * 6 párů mechanických sklopných ramen pro celkovou šířku 3 m (ne ve zkosení vzadu) * Rozšiřovací desky uložené uprostřed ložné plochy * Odkládací plocha pro rameno bagru přes zadní nápravu až k zadnímu nosníku, délka cca 2 100 mm (2 páry vázacích ok 6,4 t po stranách odkládací plochy) * Mechanicky jednodílné nájezdové rampy s pružinovým mechanismem (cca 3 000 x 720 mm) * Mechanicky posuvné boční rampy * Ložná plocha nad otočnicí: cca 1 960 x 2 520 mm * Ložná výška nenaloženého vozu cca 1 070 mm * Zadní ložná plocha: cca 6 500 x 2 520 mm * Ložná výška nenaloženého vozu cca 910 mm (včetně 860 mm nájezdového zkosení) * Podvozek, otočný rám, tažná oj a nájezdové rampy žárově zinkované * Nápravy, pružiny, vzduchové válce atd. lakované černou barvou * 235/75 R 17,5 dvoumontáž kol * Pohotovostní hmotnost 5 900 kg * --technicky možné celkové povolené zatížení 30 000 kg-- * Vozidlo je žárově zinkované * Nové vozidlo s tovární zárukou * Změny a meziprodej vyhrazeny * Ihned k dodání z Egestorfu

Stav: nový, maximálna hmotnosť nákladu: 23 830 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle compensation rear * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign sets, front and rear * VA: closed plastic fenders; HA: straight galvanized steel skirts, each with splash protection * Reflective contour tape on the sides and rear * Folding lid (hot-dip galvanized) for the toolbox in the bogie platform * Multi-voltage electrical system * LED tail lights Gjdpsx Ipavjfx Amgjbl * Removable rotating beacon at rear * Drawbar with 40 mm towing eye, height adjustment via draw spring & turnbuckle * 15-pin power connector * Four stake pockets on each side (stakes not included), with simultaneous lashing options * Load securing package consisting of: 2 lashing eyes (6.4 t), front left & right on the main frame of the bogie platform; 5 pairs of UVV-certified lashing rings, swiveling and retractable, loadable in all directions, flush-mounted in the outer frame – 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding extensions for 3 m total width (not on the rear incline) * Widening planks stored in the middle of the loading area * Excavator arm storage above rear axle to end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing eyes on the excavator arm storage) * Mechanical one-piece loading ramps with spring mechanism (approx. 3,000 x 720 mm) * Mechanical lateral ramp shift * Loading area above slewing ring: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm approach slope) * Chassis, bogie, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black tone * 235/75 R 17.5 twin tires * Unladen weight: 5,900 kg * --Permissible total weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Subject to prior sale and errors * Immediately available from Egestorf

Stav: použitý, maximálna hmotnosť nákladu: 9 400 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 07/2020, dĺžka ložného priestoru: 6 300 mm, šírka ložného priestoru: 2 480 mm, Interné číslo: ZANDT Veľmi dobre udržiavaný tandemový valníkový príves ZANDT Cargo * TAT B 110 * Valník * Spevnená drevená podlaha * Záťažové upevňovacie koľajnice * Dvojosý tandem * Široké pneumatiky * Nastaviteľné ťažné oje * Celková povolená hmotnosť 11 900 kg * Veľmi dobrý stav Gedpsymuz Usfx Amgobl Možný protiúčet Financovanie od 3,99% Chyby a predaj vopred vyhradené! Údaje v tomto inzeráte sú nezáväzné a neslúžia ako garantované vlastnosti. Predávajúci nepreberá zodpovednosť za chyby v písaní alebo prenose údajov. Uvedené vybavenie je potrebné osobitne preveriť. Všetky údaje v inzerátoch sú nezáväzné! Doručenie v rámci celej SR na požiadanie Otváracie hodiny: pondelok až štvrtok od 9:00 - 17:00 h, piatok od 9:00 - 14:00 h a podľa dohody!

Stav: použitý, maximálna hmotnosť nákladu: 9 400 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 07/2020, dĺžka ložného priestoru: 6 300 mm, šírka ložného priestoru: 2 480 mm, Interné číslo: ZANDT veľmi dobre udržiavaný tandemový plošinový príves ZANDT Cargo * TAT B 110 * plošina * zosilnená drevená podlaha * uchytenia pre ťažké náklady * tandem s 2 nápravami * široké pneumatiky * nastaviteľné oje * celková prípustná hmotnosť 11.900 kg * veľmi dobrý stav Možná výmena protiúčtom Financovanie od 3,99 % Godpfx Amsymuz Iegebl Možné chyby a predaj vopred vyhradený! Údaje v tomto inzeráte sú nezáväzné popisy a neslúžia ako zaručené vlastnosti. Predajca nepreberá žiadnu zodpovednosť za chyby v písaní alebo prenose údajov. Uvedené vybavenie je potrebné overiť samostatne. Všetky údaje v inzerátoch sú nezáväzné! Doručenie po celom Nemecku na požiadanie Otváracie hodiny: Pondelok až štvrtok 9:00-17:00 Piatok 9:00-14:00 a po dohode!!!

Stav: nový, maximálna hmotnosť nákladu: 30 740 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lifting and lowering system and RtR valve * Smard-Board for payload determination * Warning sign kits front & rear * Reflective contour markings on the sides and rear * Removable rear rotating beacon * LED lighting * Straight drawbar with 50 mm towing eye and stepless height adjustment * Toolbox made of powder-coated sheet steel and basket-type spare wheel holder, right side * Front: closed single plastic mudguards * Rear: straight steel mud flaps with spray suppression * Side underrun protection * Turntable platform extended by 520 mm with 45° corners and 3 recessed lockable storage compartments including lids * Chassis made of high-strength fine-grain steel * Decking over turntable platform: 50 mm softwood, and on low-bed platform: 60 mm softwood * Outer planks of the loading ramps made of hardwood * Four stake pockets on each side (stakes not included) with simultaneous 2 t lashing option * Lashing package: two 6.4 t lashing eyes front left and right on the main frame of the turntable platform * On the outer frame, two pairs front and rear of 13.4 t lashing rings each, and four pairs per side of 10 t swivel and lowerable lashing rings * Loadable in all directions and integrated in the outer frame Gbodpsl Tik Nofx Amgol * Two pairs of 6.4 t lashing rings on the excavator arm rest, side * 8 pairs of galvanized folding outriggers for 3 m total width (not on rear slope) * Widening planks stored on the left side in a storage compartment * Excavator arm rest above the rear axle to the end of the loading slope approx. 2,100 x 740 x 190 mm * Mechanical drop supports at the rear * Hydraulic folding ramps with hydraulically extendable tip, approx. 4,650 x 720 mm, incl. hydraulic lateral ramp adjustment & load holding valve * Loading area above turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loading height, loaded: approx. 890 mm, +/- 20 mm (incl. 860 mm loading slope) * Flow divider installed * Chassis, turntable, loading ramps, folding outriggers, and mechanical drop supports hot-dip galvanized * Axles, drawbar, air tank, and turntable painted in black * Tires: 235/75 R 17.5 * New vehicle without previous registration with manufacturer's warranty * Subject to errors and prior sale * Immediately available from Egestorf near the A7

Stav: nový, maximálna hmotnosť nákladu: 30 740 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift and lowering device and RtR valve * Smard board for load weight determination * Warning sign packages front and rear * Side and rear reflective contour tape * Removable rear revolving beacon * LED lighting * Straight drawbar with 50 mm towing eye and infinitely variable height adjustment * Toolbox made of powder-coated sheet steel and spare wheel holder in basket design on the right side * Front closed single plastic fenders * Rear straight steel mud guards, each with spray protection (spray mist reduction) * Side anti-collision guard * Extension of the turntable platform by 520 mm with 45° corners and 3 recessed storage compartments incl. lids, lockable * Chassis made of high-strength fine-grained steel * Floor above the turntable platform made of 50 mm and in lowbed platform of 60 mm softwood * Outer planks of the access ramps made of hardwood * Each side with 4 stake pockets (with simultaneous 2 t lashing possibility, no stakes included) * Lashing package: 2 lashing eyes 6.4 t at the front left and right on the main frame of the turntable platform * On the outside frame: each side front and rear 2 pairs of 13.4 t lashing rings, plus each side 4 pairs of 10 t swinging and lowering lashing rings * Loadable from all directions and recessed into the outside frame * 2 pairs of lashing rings 6.4 t on the side in excavator arm holder * 8 pairs of galvanized fold-out outriggers for 3 m overall width (however, not on the tail slope) * Side extension planks stored in a compartment on the left * Excavator arm holder above the rear axle up to the end of the access slope approx. 2,100 x 740 x 190 mm * Mechanical rear support legs * Hydraulic folding ramps with hydraulically extendable tip section approx. 4,650 x 720 mm incl. hydraulic side ramp displacement & load-holding valve * Loading area above the turntable: approx. 2,990 x 2,520 mm Gbjdpfxel Tphrj Amgel * Rear loading area: approx. 6,780 x 2,520 mm * Loading height loaded approx. 890 mm, +/- 20 mm (including approx. 860 mm access slope) * Flow divider installed * Chassis, turntable, ramps, fold-out outriggers, and mechanical rear supports hot-dip galvanized * Axles, drawbar, air tanks, and turntable painted in black * Tires 235/75 R 17.5 * New vehicle, no prior registration, with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf on the A7

Stav: použitý, maximálna hmotnosť nákladu: 17 500 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 09/2005, ďalšia kontrola (TÜV): 01/2027, šírka ložného priestoru: 2 500 mm, ? Hydraulické rampy ? Rozšíriteľné ? 8 upevňovacích ôk na každej strane ? Držiak na rezervné koleso ? Nakladacia výška: cca 930 mm ? Bubnová brzda ? Duomatické pripojenie ? Listové pruženie ? Dvojmontáž pneumatík Všetky údaje sú bez záruky / Medzipredaj vyhradený. Godpjytz Hwsfx Amgjbl