Müller-Mitteltal 14,4 To. Plateau, Luft, 3 M. Cont.- Verriegelung kúpiť použité (60 607)

Stav: nový, maximálna hmotnosť nákladu: 17 650 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 230 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2026, * TP 30.0 with 3 cable drum supports ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lifting and lowering system ----Drawbar: * Drawbar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display functionality in the truck dashboard via EBS signal – no truck-side installation required * 15-pin electrical connector * 2 additional LED reverse lights (activated via reverse gear) * LED lighting ----General Equipment: * Aluminum air tank * Stainless steel toolbox mounted on the side, approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Flatbed: * Zurr-fix exterior frame, bent at 45°, with hole pattern for lashing equipment, lashing capacity per lashing point 2,000 kg at 480 mm intervals * Option to install 3,000 kg drop lashing rings at approx. 600 mm intervals – delivery includes 12 pcs. 3,000 kg lateral lashing rings per side * 5 pockets per side for tube stakes 100 x 50 mm in the outer frame – stakes not included in delivery * 30 mm phenolic resin-coated plywood floor ----Drum Mounts: * 3 galvanised drum supports, secured via container locks, with side forklift pockets, center-to-center 800 mm (pocket width 185 mm) * Maximum drum diameter 2,600 mm, maximum drum width 1,650 mm * Clear distance between support arms approx. 1,775 mm, with cross-connection * Max. drum weight per cable drum support: 6,000 kg * Without drive and drum brake * Support arm with tension lock for securing the drum shaft * Steel drum shaft, 76 mm diameter with centering and rotating ends * 2 stop rings * 2 centering cones made of polyamide * 4 pcs. 3.2 t lashing eyes on the support arms to secure the drum on the customer side against rotation and unwinding Gjdsx Nlkgopfx Ap Djiu ----Loading Height: * Approx. 1,040 mm when loaded ----Paintwork: * Chassis, turntable, drawbar, outer frame, and rear underrun protection hot-dip galvanized * Axles painted in a black tone ----Information: * Upgrading to 30 t gross weight technically possible * New vehicle with manufacturer warranty * Errors and prior sale excepted ----Delivery Time: * Available as of approx. week 51 / 2026

Stav: nový, maximálna hmotnosť nákladu: 13 490 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2025, TRA-Kombi 18.0: * 3 in 1 = for roll-off containers, skip containers, and as a low-loader trailer ----Brakes: Giodpfowb Rakox Ap Dou * EBS-E (electronic braking system) * Emergency release device for spring brake cylinder * Drum brakes ----Axles: * 2 x 10.5 t axles ----Suspension: * Air suspension with manual rear lowering ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment device ----Electrics / Lighting: * TPMS (Tyre Pressure Monitoring System), display possible in truck via EBS signal (no installation needed on truck) * LED rear lights 12 / 24 V * 15-pin power connector ----General attachments: * Powder-coated steel toolbox * Basket-type spare wheel holder on the right-hand side * Enclosed side underrun protection * Plastic quarter mudguards with splash guards * Rear plastic bumper buffer * Foldable rear A-panel ----Loading platform: * Hot-dip galvanized main frame with raised outer frame for guiding roll containers * Steel floor with roller recesses in the bogie area * For roll-off container transport: container length from 5,500 to 7,000 mm possible * Pneumatic 4-point clamping lock and mechanically insertable stopper brackets at the front in the rail * Transport of up to 2 skip containers with a maximum of 10 m³ volume possible * 8 removable skip stops for lateral centering, the front 4 stops inserted with pivotable contact * Weld bead as anti-slip surface in the running area of the ramps * Mechanical drop-down supports at the rear ----Load securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching lashing elements for form-fit and friction-lock securing of the skips, with 4 cloverleaf-design lashing bars (side) * 1 pair of 13.4 t UVV lashing rings in the front * 4 x 8 t lashing eyes recessed per side in the outer frame ----Ramps: * Aluminium approach ramps (10.6 t/pair), 2,800 x 470 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment at rear) ----Paintwork: * Reflective contour tape on the sides & rear * Frame hot-dip galvanized * Axles and drawbar painted black ----Info: * Load securing certificate according to DIN 30722-1 * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * -- Permissible total weight of 20,000 kg technically possible -- * New vehicle without first registration, with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Immediately available from Egstorf

Stav: použitý, pohotovostná hmotnosť: 4 500 kg, maximálna hmotnosť nákladu: 13 500 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 08/2015, ďalšia kontrola (TÜV): 07/2025, dĺžka ložného priestoru: 4 800 mm, šírka ložného priestoru: 2 400 mm, výška ložného priestoru: 1 000 mm, farba: modrá, Rok výroby: 2015, typ prevodu: iný, kabína vodiča: iný, Výbava: ABS, * Nemecký príves * Stav podľa fotografií * Müller-Mitteltal trojstranný sklápací príves, typ KA-TA-R 18,0 Tandem * Rozmery sklápanej korby: 4 800 x 2 400 x 1 000 mm * Rolovacia plachta * Vzduchové odpruženie * Kotúčové brzdy * Podesta * Podpera Jost * Nosnosť 13 500 kg V prípade záujmu o novú technickú kontrolu (TÜV) Vám radi pripravíme ponuku od našich partnerských servisov. Naša ponuka je VŽDY BEZ novej technickej kontroly (TÜV), bez novej DGUV, bez novej SP a bez novej UVV. Ďalšie nákladné vozidlá nájdete na našej webovej stránke. Hovoríme týmito jazykmi: nemecky, anglicky, poľsky, turecky. Upozornenie: Dôrazne odporúčame a ponúkame možnosť obhliadky a kontroly tovaru, aby nevznikli nesprávne predstavy o stave a vhodnosti produktu. Obhliadky a kontroly sú možné kedykoľvek po dohode a sú výslovne žiadané. Gisdpfx Aewz H Nbop Deu Všetky informácie sú bez záruky. Za chyby alebo omyly v ponuke nepreberáme zodpovednosť. Kupujúci je povinný sa osobne presvedčiť o stave a výbave tovaru / vozidiel. Zmeny, medzipredaj a omyly vyhradené.

Stav: použitý, maximálna hmotnosť nákladu: 8 750 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 06/2024, celková šírka: 2 550 mm, Rok výroby: 2023, Müller Mitteltal KA-TA-R 11.9 tandem three-way tipper with numerous extras. Gross weight: 11,900 kg Payload (standard): approx. 8,750 kg Internal dimensions: 5,000 x 2,420 x 500 mm Tyres: 385/55R19.5 Four-layer paint finish, single colour Wheels: silver Chassis/side protection: hot-dip galvanized Platform body with front wall: hot-dip galvanized Axles/springs/air tanks, etc.: black Side and rear walls: RAL 2011 deep orange Reinforced and certified body according to EN 12642 XL, including load securing certificate (only in combination with 500 mm high steel sideboards). Rear stanchions bolted, hot-dip galvanized, without top coat. Lashing points LC 5,000 daN, recessed at the front. Net hooks integrated on both sides and rear into the central lock mounts of the main sideboard, plus two additional hooks on the front wall. BPW axles instead of GIANT Tipping platform with fixed front wall in hot-dip galvanized design, with bolted, galvanized rear stanchions, without further coating (not applicable for HARDOX floor). Due to the system, waviness may occur during hot-dip galvanizing, especially in large floor panels; complaints related to this are excluded from warranty. Tyres 385/55R19.5 instead of 235/75R17.5 (ground and coupling height + approx. 110 mm, code 08.940 ramp length of 3,570 mm required). 1 piece plastic toolbox, black, lockable, W=750 x H=350 x D=300 mm (45 kg payload with evenly distributed load), position: right side of chassis frame, in direction of travel. 1 pair of aluminium loading ramps without running channels (8 t/pair), 3,570 x 400 x 105 mm, suitable for rubber-tyred and tracked vehicles, 55 kg each. Two-step access, in front of the front wall, left-hand side in direction of travel (hot-dip galvanized). Connecting cables extended for agricultural and forestry towing vehicles. Gedpevy Tvtefx Ap Deiu Further information New: No

Stav: použitý, prvá registrácia: 10/2014, celková hmotnosť: 27 000 kg, pohotovostná hmotnosť: 5 100 kg, farba: sivý, typ prevodu: iný, emisná trieda: žiadny, Rok výroby: 2014, maximálna hmotnosť nákladu: 21 900 kg, ďalšia kontrola (TÜV): 03/2027, zavesenie: oceľ, veľkosť pneumatiky: 265/70 R19.5, veľkosť prednej pneumatiky: 265/70 R19.5, veľkosť zadnej pneumatiky: 265/70 R19.5, kabína vodiča: iný, Výbava: ABS, elektronický stabilizačný program (ESP), hmlové svetlá, osvetlenie, pneumatická brzda, podvozok, registrácia nákladného vozidla, ďalšie svetlomety, Müller Mitteltal 3-axle trailer for skip containers TM 2 24.0 * Designed for carrying 2 x 12 m³ containers/skips Gisdpfxozbbbdj Ap Dsu * Pneumatically lowerable drawbar for front loading * Adjustable stop for container placement * Manual ratchet tie-down system * Sealed/solid floor * BPW axles * Leaf spring suspension * Galvanized frame/chassis * Drum brakes * Wear plates * Additional headlights * 7 lashing rings per side, each mounted externally * Large tool box * Weights: Gross - 27,000 kg, Unladen - 5,170 kg, Payload - 21,830 kg * German vehicle with German documents!! * 1st owner!! * First registration: 21.10.2014 * MOT (TÜV) valid until 03/2027 * Safety inspection (SP) valid until 09/2026 * VIN: WMM00000E0058208 Subject to prior sale, errors, and modifications! Company logos have been removed from some images – please inquire! No guarantee for the functionality of the extra features! Your contact: Christoph Ott Tel. + WhatsApp:

Stav: použitý, maximálna hmotnosť nákladu: 29 850 kg, celková hmotnosť: 32 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 07/2012, ďalšia kontrola (TÜV): 06/2028, Rok výroby: 2012, Interné číslo vozidla: G300402 Nemecké vozidlo Ihneď k dispozícii v našom areáli v Kaufungen - Kassel, Nemecko Viac INFO u Luis Lucena Rok výroby 2012 Prázdna hmotnosť návesu: 6 530 kg Miešač na betónový náves LIEBHERR 10 m³ Zmeny a omyly vyhradené Radi prijmeme vaše ojazdené vozidlo na protiúčet. Giodpexy Ul Sofx Ap Deu Financovanie priamo u nás v spoločnosti možné. GOLEC NUTZFAHRZEUGE GMBH Hovoríme: nemecky, anglicky, španielsky, poľsky, ukrajinsky, rusky, bulharsky.

Stav: použitý, maximálna hmotnosť nákladu: 7 100 kg, celková hmotnosť: 10 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 07/2007, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 450 mm, výška ložného priestoru: 1 100 mm, celková šírka: 2 550 mm, Vozidlo / Nadstavba: Tandemový trojstranný sklápací vozík Prvá registrácia: 07/07 Celková hmotnosť: 10.000 kg Gedpoyz H Azofx Ap Deiu Prevádzková hmotnosť: 2.900 kg Užitočné zaťaženie: 7.100 kg Celková dĺžka: 6.900 mm Dĺžka ložnej plochy: 5.000 mm Šírka: 2.550 mm / Šírka ložnej plochy cca 2.450 mm Výška ložnej plochy: cca 1.100 mm Ďalšie informácie - 40 km/h - 500 mm bočnice - 500 mm pozinkovaný predný nadstavec - 7 párov kotviacich ok na ložnej ploche - 4 páry kotviacich ok pod nadstavbou zvonka - Podperná noha - Zadná podpera - Pružina na zdvíhanie bočnice - Nástupné rampy voliteľné za 1.280,00 €

Stav: nový, maximálna hmotnosť nákladu: 16 400 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * T3 Profile 30.0: * EBS-E (electronic braking system) * TPMS (tire pressure monitoring system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension with lift and lower function * SmartBoard information system on trailer with pressure sensors for axle load display per axle group * Side underrun protection * Mechanically adjustable warning panel kits front and rear * Front axle with closed plastic mudguards, rear axle with straight, galvanized steel skirts, each with spray protection * Folding cover (hot-dip galvanized) for toolbox on bogie platform * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm (black powder-coated), mounted right side * 15-pin power connector * LED lighting 12/24 V * Removable LED beacon at rear * Side marker lights with indicator control Giedpfeq Dyvcox Ap Dju * Drawbar with 40 mm towing eye and height adjustment via drawbar spring and turnbuckle * Tire pressure monitoring system with display option in the truck via EBS signal (no truck-side installation required) * Rubber coating on folding ramps as well as on approach slope left and right (approx. 860 mm length) * Rubber coating on longitudinal beams from front to rear crossmember * Hardwood floor on the running surfaces of the low-loader platform * Four stake pockets per side, each with 2 t lashing option * Load securing package consisting of: 5 pairs of swiveling and retractable UVV lashing rings, loadable in all directions and recessed into the outer frame – corners rated to 13.4 t, others 10 t * Six pairs of mechanical folding outriggers for 3 m overall width (not at rear slope) * Plank holder under the loading area, longitudinal arrangement * Roller stop raised in front of the front crossmember, with 1 x 6.4 t lashing ring per side * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable tip and load-holding valves * Hydraulic side ramp shift * Hydraulic rear support (single-stage cylinder) * Hydraulic flow divider on trailer (for hydraulic pump capacity in truck over 40 l to max. 140 l/min) * Hydraulics control block, splash-proof * Dual-circuit hydraulics * Loading area over turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (including 860 mm approach slope) * Loaded platform height approx. 890 mm +/- 20 mm (air suspension) * Chassis, bogie, roller stop, folding extensions, and ramps hot-dip galvanized * Axles, turntable, drawbar, air tanks, etc. painted in black * Loaded platform height: approx. 890 mm +/- 20 mm * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 16 400 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * T3 Profile 30.0: * EBS-E (electronic braking system) * TPMS (tire pressure monitoring system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension with lift and lower function * SmartBoard information system on trailer with pressure sensors for axle load display per axle group * Side underrun protection * Mechanically adjustable warning panel kits front and rear * Front axle with closed plastic mudguards, rear axle with straight, galvanized steel skirts, each with spray protection * Folding cover (hot-dip galvanized) for toolbox on bogie platform * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm (black powder-coated), mounted right side * 15-pin power connector * LED lighting 12/24 V * Removable LED beacon at rear * Side marker lights with indicator control * Drawbar with 40 mm towing eye and height adjustment via drawbar spring and turnbuckle * Tire pressure monitoring system with display option in the truck via EBS signal (no truck-side installation required) * Rubber coating on folding ramps as well as on approach slope left and right (approx. 860 mm length) * Rubber coating on longitudinal beams from front to rear crossmember * Hardwood floor on the running surfaces of the low-loader platform * Four stake pockets per side, each with 2 t lashing option * Load securing package consisting of: 5 pairs of swiveling and retractable UVV lashing rings, loadable in all directions and recessed into the outer frame – corners rated to 13.4 t, others 10 t * Six pairs of mechanical folding outriggers for 3 m overall width (not at rear slope) * Plank holder under the loading area, longitudinal arrangement Gijdpetplv Nefx Ap Deu * Roller stop raised in front of the front crossmember, with 1 x 6.4 t lashing ring per side * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable tip and load-holding valves * Hydraulic side ramp shift * Hydraulic rear support (single-stage cylinder) * Hydraulic flow divider on trailer (for hydraulic pump capacity in truck over 40 l to max. 140 l/min) * Hydraulics control block, splash-proof * Dual-circuit hydraulics * Loading area over turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (including 860 mm approach slope) * Loaded platform height approx. 890 mm +/- 20 mm (air suspension) * Chassis, bogie, roller stop, folding extensions, and ramps hot-dip galvanized * Axles, turntable, drawbar, air tanks, etc. painted in black * Loaded platform height: approx. 890 mm +/- 20 mm * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 10 950 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, Výbava: ABS, zdvíhacie čelo, Müller-Mitteltal ETÜ-TA-R 14.4 Tandem – Low Loader – Flatbed – Trailer Available in calendar week 37 of 2026, inquiry number: 31941. Delivery to your address possible. * We are happy to provide you with an individual offer * ---- * Gross weight: 14.4 t, Payload: 10.95 t * LED lighting system * GIGANT axles, EBS, twin tires 235/75R 17.5, parabolic springs * Tire pressure monitoring system (TPMS) * 6.27 m x 2.47 m flatbed with galvanized 400 mm front wall * Excavator bucket tray made of hardwood, bolted to front wall * Unladen deck height: 930 mm / laden: 870 mm * Single-piece ramps with hot-dip galvanized anti-slip steel grating, can be pushed together to about 20 mm, secured by support rods and diagonal bracing Godpjzbfmqjfx Ap Doiu * Ramp assister with vertically mounted, adjustable springs for easy one-man operation * 4 UVV drop lashing rings (LC 6300 daN) * Perforated outer frame (45°-bent with hole pattern for lashings, lashing capacity per point LC 2000 daN at a minimum spacing of 480 mm. Installation of drop lashing rings LC 3000 daN at approx. 600 mm spacing possible) with close-spaced cross profiling, raised front and rear edge, rear drive-on slope, hot-dip galvanized * 10 UVV folding lashing rings LC 3000 daN retractable in the existing hole grid on the outer frame, additionally * Further lashing options via drillings (Ø 50 mm, LC 1200 daN) in front and rear beams * Toolbox in front of the front wall * Side marker lights with indicator integration * Softwood floor, 50 mm thick. Chassis hot-dip galvanized * Height-adjustable support winch at the front, folding supports at the rear * 2 container locks countersunk in the front crossmember * Drawbar with 40 mm towing eye (hot-dip galvanized), height-adjustable, 50 mm eye possible upon request * 1 removable LED beacon at the rear ---- * Leasing, hire-purchase, financing, and trade-in possible * Example: €525 for 60 months, no down payment, no balloon payment ---- * Our opening hours: * Monday – Thursday: 08:00 – 17:00 * Friday: 08:00 – 15:00 Outside of opening hours available by appointment. We speak German, English, Polish, French. Leasing, financing, trade-in possible.

Stav: nový, maximálna hmotnosť nákladu: 16 000 kg, celková hmotnosť: 21 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 500 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 700 mm, Rok výroby: 2024, * KA-TA-RT 21.0 ML ----Brakes: * Without ABS / EBS, approved for 40 km/h * Spring-loaded parking brake * Drum brakes ----Axles: * Gigant axles ----Suspension: * Tandem equalizing suspension with 100 mm wide parabolic leaf springs ----Drawbar / Tow Eye: * Fixed welded drawbar with low-maintenance ball seat for K80 ball coupling (offset by +77 mm / 33 mm via mounting plate), with elevated gallows for connection lines ----Electrics / Lighting: * 12 V, 7 + 4-pin power line * LED lighting system 12 / 24 V with protective grilles * 2 LED work lights at the rear, switchable from the towing vehicle, no installation required on the towing vehicle ----General Equipment: * Support winch at the front * Mechanical drop-down supports at the rear * Side marker lights with indicator control * Plastic quarter mudguards * Plastic toolbox approx. 750 x 350 x 300 mm, right side * Hot-dip galvanized, two-step access ladder in front of the bulkhead on the left ----Chassis: * High-tensile fine grain steel chassis ----Tipper Body: * Steel pallet - 3-way tipper body with M-Strong side walls (fixed front wall, continuous side walls – without center stanchions – pivoting via manual central locking and mechanically foldable with side wall torsion springs) * Hydraulic tailgate 500 mm high, usable as a hydraulic chute, with 115° opening angle * 4 mm Hardox 450 steel floor ----Load Securing: * 1 x 7 t lashing ring recessed and foldable in each corner * 4 x 3 t lashing rings recessed and foldable each side ----Ramps: Gedpfx Aper Dpzue Deiu * 1 pair of aluminum loading ramps (10 t/pair with axle spacing over 2,500 mm), 3,570 x 410 x 120 mm, suitable for rubber-tyred and tracked vehicles * 2 recesses for aluminum loading ramps at the rear, integrated into the chassis * Load securing in accordance with EN 12642 XL ----Coupling Height: * Loaded approx. 530 mm & unloaded approx. 590 mm ----Paintwork: * Superstructure painted RAL 9010 pure white * Chassis, drawbar, rear drop-down supports, underride guard hot-dip galvanized * Axles, air tank, support winch at the front * K80 coupling painted in black ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery time: * Immediately available from Egestorf

Stav: nový, maximálna hmotnosť nákladu: 16 000 kg, celková hmotnosť: 21 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 500 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 700 mm, Rok výroby: 2024, * KA-TA-RT 21.0 ML ----Brzdy: * Bez ABS / EBS, schváleno pro max. rychlost 40 km/h * Pružinová parkovací brzda * Bubnové brzdy ----Nápravy: * Gigant nápravy ----Pérování: * Tandemový vyrovnávací agregát s 100 mm širokými parabolickými listy ----Tažné oko / Tažná tyč: * Napevno svařená tažná tyč s bezúdržbovou kulovou hlavou pro K80 kulovou spojku (nastavitelná o +77 mm / 33 mm přes čelní desku), s vyvýšeným držákem pro připojovací vedení Gisdpfxjr Dpz He Ap Dou ----Elektrika / Osvětlení: * 12 V 7 + 4 pólový elektrický kabel * LED osvětlení 12/24 V se sítí proti poškození * 2 LED pracovní světlomety za vozidlem, ovládané z tažného vozidla bez nutnosti dodatečné instalace na tažném vozidle ----Všeobecné přídavné díly: * Opěrná klika vpředu * Mechanické sklopné podpěry vzadu * Boční obrysová světla s funkcí směrovky * Plastové čtvrtobloukové blatníky * Plastová skříň na nářadí cca 750 x 350 x 300 mm vpravo na boku * Dvoustupňové žárově zinkované schody před čelní stěnou vlevo ----Podvozek: * Rám z jemnozrnné oceli ----Sklápěcí korba: * Ocelová třístranná sklápěcí nástavba s robustními bočnicemi (pevná přední stěna, průběžné boční stěny – bez středových sloupků – kyvné přes manuální centrální zamykání a mechanicky sklopné s pomocí pružinového mechanismu) * Hydraulicky poháněná zadní stěna, výška 500 mm, slouží jako hydraulická skluzavka s úhlem otevření 115° * 4 mm Hardox 450 ocelové dno ----Zajištění nákladu: * V každém rohu 1x utopený a sklopný úvazek, nosnost 7 t * Po stranách vždy 4x utopený a sklopný úvazek na trubku, nosnost 3 t ----Rámy: * 1 pár hliníkových nájezdových ramp (nosnost 10 t/pár, při rozteči náprav nad 2500 mm), rozměr 3 570 x 410 x 120 mm, vhodné pro pneumatiková i pásová vozidla * 2 zasouvací kanály pro rampy vzadu v rámu, zajištění nákladu dle EN 12642 XL ----Výška spojení: * Naložené cca 530 mm, nenaložené cca 590 mm ----Lakování: * Konstrukce lakována odstínem RAL 9010 (čistě bílá) * Rám, tažná tyč, zadní podpěry, ochrana proti podjetí žárově zinkované * Nápravy, vzduchojem, přední opěrná klika * K80 spojka lakovaná černým odstínem ----Informace: * Nový vůz s výrobcem poskytovanou zárukou * Změny a mezitímní prodej vyhrazeny ----Dodací lhůta: * Ihned k dispozici v Egestorfu

Stav: použitý, maximálna hmotnosť nákladu: 12 750 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 06/1994, ďalšia kontrola (TÜV): 05/2026, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 300 mm, celková šírka: 2 450 mm, celková výška: 1 600 mm, Celková hmotnosť: 18 000 kg Prevádzková hmotnosť: 5 250 kg Užitočné zaťaženie: 12 750 kg Godoy T T T Rjpfx Ap Dsiu Celková dĺžka: 7 150 mm Dĺžka ložnej plochy: cca 5 000 mm Šírka: 2 450 mm / ložná šírka cca 2 300 mm Výška ložnej plochy: cca 1 600 mm Ďalšie informácie: - Výškovo nastaviteľná oporná noha - Výškovo nastaviteľné oj - Bočnice cca 770 mm, v strede delené, sklopné - Zadné čelo cca 900 mm - Nápravy BPW - Pneumatiky 385/65R22,5 - LED cúvacie svetlá

Stav: nový, maximálna hmotnosť nákladu: 8 870 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * ETÜ-TA-R 11.9: ----Braking System: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 5.5 to. BPW axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm * 40 mm flange drawbar eye Gsdpfsq Ra D Ejx Ap Djiu ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic quarter mudguards * Plastic toolbox mounted at the front right on the bulkhead ----Electrics / Lighting: * RDÜ tire pressure monitoring system * LED lighting ----Loading Platform: * Loading platform length: 6.27 m * Suitable for container transport * 50 mm softwood floor * Pre-installed fittings at the bulkhead for subsequent mounting of container locks * Bolted smooth steel plate bulkhead * Fold-down side walls made of trapezoidal-profile steel plate with spring-assisted drop sides * Steel rear panel, can be slid in between the ramp holders at the front of the bulkhead when not in use * Rear stanchions bolted ----Load Securing: * Perforated outer frame, approx. 45° angled with 2 to. lashing capacity every 480 mm * Option for 3 to. recessed lashing rings every 600 mm * 1 x 6.3 to. lashing point in each of the front and rear corners * Various holes in the bulkhead and end crossmember for 1.2 to. lashing options ----Ramps: * One-piece mechanical loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compressed to 20 mm) * Rear approach angle approx. 860 mm ----Tyres: * Tyres: 235/75R17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Hot-dip galvanized chassis, drawbar, bulkhead, rear panel, rear stanchions and loading ramps * Side wall paint finish in RAL 9010 pure white * Side wall painting in other RAL colors available at extra cost ----Information: * Subject to errors and prior sale * New vehicle with manufacturer's warranty ----Delivery time: * Available from KW

Stav: nový, maximálna hmotnosť nákladu: 13 490 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2025, TRA-Kombi 18.0: 3-in-1 solution: suitable for roll-off containers, skip containers, and as a low-loader. ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 10.5-ton axles ----Suspension: * Air suspension with manual lowering at the rear ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye and height adjustment device ----Electrical / Lighting: * Tire pressure monitoring system (TPMS), displayable in the truck via EBS signal (no truck-side installation required) * LED rear lights 12/24 V * 15-pin power connector ----General Attachments: * Toolbox made of powder-coated steel sheet * Spare wheel holder in basket design, installed on the right side * Enclosed side underrun protection * Plastic quarter mudguards with spray protection * Rear plastic bump stops * Foldable A-sign at rear ----Loading Platform: * Hot-dip galvanized main frame with elevated outer frame for guiding roll containers * Steel floor with recesses for rollers in the bogie area * For roll-off container transport: container lengths from 5,500 to 7,000 mm possible * Pneumatic 4-point clamp locking system and mechanical drop-in stop angles at the front of the track * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Includes 8 repositionable skip stops for lateral centering of skips; front 4 skip stops plug-in with swinging stop * Weld bead as anti-slip surface in the ramp area * Mechanical drop-down supports at the rear ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning devices for positive and non-positive securing of skips; four lashing brackets in cloverleaf design per side * 1 pair of 13.4 t UVV lashing rings at the front * Four 8 t lashing eyes per side, recessed into the outer frame ----Ramps: * Aluminum approach ramps (10.6 t per pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Paintwork: * Reflective contour tape on the sides and rear * Hot-dip galvanized frame * Axles and drawbar painted black Gsdpfxjl Tld Is Ap Dsiu ----Information: * Load securing certificate according to DIN 30722-1 * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Gross vehicle weight rating (GVWR): technically up to 20,000 kg * New vehicle without initial registration, with manufacturer warranty * Subject to errors and prior sale ----Delivery time: * Immediately available from Egstorf

Stav: nový, maximálna hmotnosť nákladu: 8 870 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * ETÜ-TA-R 11.9: ----Brzda: * EBS brzdový systém * Nouzové odjištění pro pružinové válce * Bubnové brzdy ----Náprava: * 2 x 5,5 t BPW nápravy ----Odpružení: * Parabolické listové pružiny s vyrovnávací jednotkou ----Oje / Oko s přírubou: * Oje výškově nastavitelné o 300 mm * 40 mm přírubové tažné oko ----Obecné příslušenství: * Přední podpěrná noha Jost * Vnější žárově zinkované sklopné podpěry vzadu * Plastové čtvrt-blatníky * Plastová skříň na nářadí vpravo vpředu zvenku na čelní stěně ----Elektroinstalace / Osvětlení: * RDÜ – monitorování tlaku v pneumatikách * LED osvětlení ----Ložná plocha: * Ložná plocha 6,27 m * Vhodné pro přepravu kontejnerů * 50 mm podlaha z jehličnatého dřeva * Příprava před čelní stěnou pro dodatečnou montáž zámků kontejneru * Našroubovaná čelní stěna z hladkého plechu * Sklopné postranní stěny z trapézového ocelového plechu s podpěrou víka bočnice * Zadní stěna z oceli – zasunovací mezi držáky ramp během nevyužití, uvnitř před čelní stěnou * Šroubované zadní sloupky ----Zajištění nákladu: * Děrovaný vnější rám ohnutý cca 45° s upínací silou 2 t každých 480 mm * Možná instalace sklopných ok s nosností 3 t každých 600 mm * V rozích vpředu a vzadu vždy 1x 6,3 t upínací oka * V čelní a koncové příčce různé otvory pro možnost uchycení 1,2 t ----RAMPY: * Jednodílné mechanické nájezdové rampy s pružinou pro ovládání jednou osobou cca 2.750 x 600 mm (lze zasunout až na 20 mm) * Náběhový úhel vzadu cca 860 mm ----Pneumatiky: Gjdpfxorvvfwo Ap Djiu * Pneumatiky: 235/75R17.5 ----Rozvor: * Rozvor: 990 mm ----Lakování: * Žárově zinkovaný rám podvozku, oje, čelní stěna, zadní stěna, zadní sloupky a nájezdové rampy * Lakování bočnic v RAL 9010 (čistá bílá) * Lakování bočních stěn v jiném odstínu RAL za příplatek možné ----Info: * Změny a mezitímní prodej vyhrazeny * Nové vozidlo s výrobní zárukou ----Dodací lhůta: * K dispozici od týdne

Stav: nový, maximálna hmotnosť nákladu: 37 390 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-assist for maneuvering purposes on the first axle, controlled via EBS (without truck-side installation) * Rear-most axle as trailing steering axle with electro-pneumatic steering lock * Trailing axle lock operated from the cab for maneuvering via EBS (without truck-side installation) ----Suspension: * Air suspension with lifting and lowering system and Ride-Height Return (RtR) valve ----Electrics / Lighting: * Smart-Board mounted on the trailer as infotool with pressure sensors for total axle load display * 15-pin power socket * LED lighting 12 / 24 V * Removable rear LED warning beacon * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator function * Tire pressure monitoring with display in the truck via EBS signal (without truck-side installation) ----General Attachments: * Side underrun protection Gisdpfeq Euaksx Ap Dsu * Support legs at the front and swiveling supports at the rear of the chassis * Straight steel fenders * Spare wheel holder in front of the bulkhead crossmember (without spare wheel) * Mechanically adjustable warning sign sets at the front and rear * Swivel arm as carrier for connection lines from the truck to the semi-trailer ----Low Loader Deck: * 2nd king pin position * Semi-trailer platform with 45° chamfered front corners and front toolbox made of galvanized, powder-coated sheet steel (W = 2,480 x H = 500 x L = 665 mm) with hinged lid * 400 mm high folded and removable aluminum side boards (in RAL custom color) on the sides of the semi-trailer platform * Removable rear board, 150 mm high * Rear slope on the semi-trailer platform to low-bed section, approx. 700 mm long with chequered plate covering, as well as a perforated strip at the end for attaching aluminum approach ramps * Semi-trailer platform with 50 mm clamped wooden planks, low-bed platform with 60 mm clamped wooden planks * Checker plate over the axles * 9 mechanical folding extensions for total width up to 3 meters, except on the rear slope (extension boards available, with closed storage compartment transversal under the loading area) * 3 recesses under the platform for storing either aluminum approach ramps or wooden planks for wheel well covers ----Load Securing (LaSi package): Semi-trailer Platform: * Perforated outer frame, 45° angled, with pattern for lashing equipment (2 t lashing capacity per lashing point at a min. 480 mm spacing) * Each side with 3 x 13.4 t lashing rings recessed in the floor (1 x on the semi-trailer platform, 1 x on the longitudinal beams after the step, 1 x above the middle axle next to the longitudinal beam) Low-Bed Platform: * Each side with 3 x 13.4 t lashing rings on the outer frame (1 x at the start of the semi-trailer platform step, 1 x start of the ramp slope, 1 x end of ramp slope) * Each side with 2 x 10 t lashing rings (1 x between front wheel well and 1st axle, 1 x between 2nd and 3rd axle) * Each side with 3 x 5 t lashing rings bolted to the outer frame of the wheel wells (2 on the front well, 1 on the rear) ----Excavator Arm Rest: * Extended excavator arm rest from the end of the last fixed axle, over the steering axle, to the end beam, continuous, with internal reinforcement profile approx. W = 770 mm x Depth rear = 270 / Depth front 170 mm * Each side with 2 x 6.4 t lashing ri

Stav: nový, maximálna hmotnosť nákladu: 37 390 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (Electronic Braking System) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-up aid for shunting purposes engaged on the first axle via EBS (without truck-side installation) * Last axle as a trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle from the cab for shunting purposes, operated via EBS (without truck-side installation) ----Suspension: * Air suspension with lifting and lowering function as well as RtR valve ----Electrics / Lighting: * Smart Board mounted as an info tool on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tire pressure monitoring system with display function in the truck via EBS signal (without truck-side installation) ----General attachments: * Side underrun protection * Landing legs at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall cross member (without spare wheel) * Mechanically adjustable warning signage packages at the front and rear * Swivel arm as carrier for connection lines from the truck to the semi-trailer ----Low-bed loading area: * 2nd king pin position * Fifth wheel platform with 45° beveled front corners and a front toolbox made of galvanized, powder-coated sheet steel, W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm aluminum side boards on the fifth wheel platform (custom RAL color), foldable and removable * Rear wall -150 mm- slotted in * Rear chamfer on the fifth wheel platform to low-bed, approx. 700 mm long with checker plate cover and at the end a perforated strip for hooking in aluminum approach ramps * Fifth wheel platform with 50 mm clamped wooden floorboards, and low-bed platform with 60 mm clamped wooden floorboards * Checker plate above the axles Giedpstpta Dsfx Ap Dou * 9 mechanical folding wideners to 3 m total width, but not on the rear chamfer (widening planks available with closed storage box transversely under the loading area) * 3 receiver shafts under the fifth wheel platform for optional storage of aluminum approach ramps or wooden planks for covering wheel recesses ----Load securing (LaSi Package): Fifth wheel platform: * Perforated outer frame bent at 45°, with hole pattern for lashing equipment (2 t lashing capacity per point with a minimum spacing of 480 mm) * Each side: 3 x 13.4 t lashing rings recessed in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal beams after the kick-up, 1 x above the middle axle next to the longitudinal beam) Low-bed platform: * Each side: 3 x 13.4 t lashing rings on the outer frame (1 x at the start of the fifth wheel platform kick-up, 1 x at the beginning of the approach ramp, 1 x at the end of the approach ramp) * Each side: 2 x 10 t lashing rings (1 x between front wheel recess and 1st axle, 1 x between the 2nd and 3rd axle) * Each side: 3 x 5 t lashing rings bolted to the outer frames of the wheel recesses (2 at the front wheel recess, 1 at the rear wheel recess) ----Excavator arm trough: * Extended excavator arm trough, continuous from end of last rigid axle over steering axle to end cross member, with inner reinforcement profile approx. W = 770 mm x D rear = 27

Stav: nový, maximálna hmotnosť nákladu: 14 660 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, ETÜ-TA-R 19.0: ----Braking System: * Wabco EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: 2 x 10 t BPW Eco axles ----Suspension: * Parabolic springs - 110 mm wide - with tandem equalizer ----Drawbar / Flange Eye: Drawbar with 50 mm flange eye and height-adjustable drawbar ----Electrics / Lighting: * 15-pin power connector * LED tail lights Gisdpol Th Hwefx Ap Deu * RDÜ tire monitoring system ----General Equipment: * Jost landing gear at the front * External folding supports at the rear * Side underrun protection * Plastic quarter mudguards ----Low Bed Area: * 50 mm softwood floor * Bracket in front of the front wall for retrofitting container locks * Bolted front wall made of smooth sheet metal * Side walls made of trapezoidal steel sheet, foldable with drop side spring lifts * Steel rear wall, retractable between the ramps - storage bracket inside at the front wall when not in use * Bolted rear stakes ----Load Securing: * Perforated outer frame, approx. 45 degrees angled, with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * In the front and rear corners, each with 1 x 10 t lashing ring; various holes in the front and rear cross member for 1.2 t lashing options * Profifix lashing rail in the center longitudinal axis for lashing options up to LC 3000 daN ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 620 mm (retractable to 20 mm) * Rear approach angle approx. 860 mm ----Paint Finish: * Chassis, drawbar, front wall, rear wall, ramps and folding supports hot dip galvanized * Drop sides painted in RAL 9010 pure white * Side walls can be painted in a RAL color of your choice at additional cost * Axles, springs, air tank, flange eye, and landing gear painted in black ----Information: * New vehicle with full manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf on the A7

Stav: použitý, maximálna hmotnosť nákladu: 10 870 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 06/2025, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2023, Výbava: ABS, KA-TA-R 14.4: ----Braking system: * Wabco ABS * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equaliser unit ----Drawbar / Flange Draw Eye: * Height-adjustable drawbar by approx. 300 mm with 40 mm flange draw eye ----Electrics / Lighting: * 15-pin power connector * Multi-chamber tail lights ----General accessories: * Jost mechanical landing gear at front * Rear: 2 mechanical folding supports * Plastic toolbox approx. 650 x 350 x 320 mm, mounted front right side of the chassis * Bolt-on underrun protection * Plastic quarter mudguards * Net hooks at each position of the central locking as well as 2 on the front wall ----Chassis: * Chassis made from high-tensile fine-grained steel ----Tipper body: * Steel pallet-style 3-way tipper with continuous side walls, top with inner tube reinforcement – without centre stanchions, foldable with drop-side spring assist * Rear posts bolted * Combination steel double rear doors, asymmetrically split – can be swung and locked up to 270°, not foldable – with additional pendulum frame for automatic tailgate opening during tipping, locking via galvanised rotary bolt at the rear and central locking, deactivation function for automatic rear wall operation when reversing tipping with open wing door * 4 mm fine-grained steel floor plate * Rear receiver rail for loading ramps ----Load securing: * 1 x 5 t lashing ring in each corner, and 4 x 3 t lashing eyes each side recessed into the outer frame ----Ramps: * 1 pair of aluminium loading ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tyred & tracked vehicles * Lockable storage compartment under the loading platform rearwards, integrated in chassis, for the ramps ----Tyres: * Tyres: 285/70 19.5 ----Paintwork: * Chassis, drawbar, underrun protection, rear stake, rear folding supports hot-dip galvanised * Axles, springs, air tank and landing gear painted in black tone * Drop-side paintwork in RAL 9010 pure white * Side wall paintwork available in other RAL colours at extra charge ----Info: * Reinforced body with load securing certificate * Vehicle has a day registration (unused) Gisdpfx Apsl Th Hte Deu * Subject to errors and prior sale ----Delivery time: Available immediately ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 14 660 kg, celková hmotnosť: 19 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, ETÜ-TA-R 19.0: ----Brakes: * Wabco EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: 2 x 10 t BPW Eco axles ----Suspension: * Parabolic springs - 110 mm wide - with tandem equalizer unit ----Drawbar / Flange Eye: Gjdpfx Ajl Th Hlop Dsiu Drawbar with 50 mm flange eye and height-adjustable drawbar ----Electrics / Lighting: * 15-pin power connector * LED tail lights * RDÜ tire monitoring system ----General Attachments: * Jost landing gear at the front * External folding supports at the rear * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * 50 mm softwood floor * Provision in front of the bulkhead for retrofitting container locks * Bolted smooth sheet metal bulkhead * Side walls made of trapezoidal-profiled steel sheet, foldable with drop-side spring assist * Steel rear wall, insertable between the ramps – with internal mounting holder in front of the bulkhead when not in use * Screw-mounted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45-degree angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * In each front and rear corner, 1 x 10 t lashing ring; various holes in the bulkhead and rear cross member for 1.2 t lashing points * Profifix lashing rail along the longitudinal axis, centrally mounted, for lashing up to LC 3000 daN ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 620 mm (collapsible down to 20 mm) * Rear approach angle approx. 860 mm ----Paintwork: * Chassis, drawbar, bulkhead, rear wall, ramps, and folding supports hot-dip galvanized * Drop-sides painted in RAL 9010 pure white * Sidewalls painted in any RAL colour at extra charge * Axles, springs, air tank, flange eye, and landing gear painted in black tone ----Information: * New vehicle with full manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex works Egestorf on the A7

Stav: použitý, maximálna hmotnosť nákladu: 10 870 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 06/2025, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2023, Výbava: ABS, KA-TA-R 14.4: ----Braking System: * Wabco ABS * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Drawbar / Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm, with 40 mm flange drawbar eye ----Electrical System / Lighting: * 15-pin power connector * Multi-chamber tail lights ----General Attachments: * Jost mechanical landing gear at front * 2 mechanical folding supports at rear * Plastic toolbox, approx. 650 x 350 x 320 mm, mounted at the front right side of the chassis * Bolt-on underrun protection * Plastic quarter mudguards * Net hooks at the central locking stanchions and 2 on the front wall ----Chassis: * Chassis made of fine-grained steel ----Tipping Platform: * Steel pallet 3-way tipper body, continuous side walls with internal pipe reinforcement, without central stanchions, foldable with board wall spring lifting device * Rear stanchions bolted * Combined steel double-wing rear doors, asymmetrically divided, can be swung and locked at 270°, not foldable, with additional pendulum frame for automatic rear wall opening when tipping, locking via galvanized rod lock at rear and central locking; deactivation function for automatic rear wall function when tipping backwards with open wing door * 4 mm sheet steel floor made of fine-grained steel * Rear guide rail for loading ramps ----Load Securing: * Each corner features 1 x 5 t lashing ring, plus 4 x 3 t lashing eyes each side recessed in the outer frame ----Ramps: * 1 pair of aluminium approach ramps, approx. 3,570 x 410 mm (load capacity 10 t / pair), suitable for rubber-tyred & tracked vehicles * Lockable storage compartment for the ramps recessed under the loading bed at the rear of the chassis ----Tyres: * Tyres: 285/70 19.5 ----Paintwork: * Chassis, drawbar, underrun protection, rear stanchion, rear folding supports hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in black tone * Board wall coating in RAL 9010 pure white * Side wall coating available in any RAL color for an additional charge ----Information: Gsdpfx Asl Th Dujp Doiu * Reinforced body with load securing certificate * Vehicle has a day registration (unused) * Subject to errors and prior sale ----Delivery Time: Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 13 490 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2025, TRA-Kombi 18.0: * 3 in 1 = for roll-off containers, skip containers, and as a low-loader trailer ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring brake cylinder * Drum brakes ----Axles: * 2 x 10.5 t axles ----Suspension: * Air suspension with manual rear lowering ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment device ----Electrics / Lighting: * TPMS (Tyre Pressure Monitoring System), display possible in truck via EBS signal (no installation needed on truck) * LED rear lights 12 / 24 V * 15-pin power connector ----General attachments: * Powder-coated steel toolbox * Basket-type spare wheel holder on the right-hand side * Enclosed side underrun protection * Plastic quarter mudguards with splash guards * Rear plastic bumper buffer * Foldable rear A-panel ----Loading platform: * Hot-dip galvanized main frame with raised outer frame for guiding roll containers * Steel floor with roller recesses in the bogie area * For roll-off container transport: container length from 5,500 to 7,000 mm possible * Pneumatic 4-point clamping lock and mechanically insertable stopper brackets at the front in the rail * Transport of up to 2 skip containers with a maximum of 10 m³ volume possible * 8 removable skip stops for lateral centering, the front 4 stops inserted with pivotable contact * Weld bead as anti-slip surface in the running area of the ramps * Mechanical drop-down supports at the rear ----Load securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching lashing elements for form-fit and friction-lock securing of the skips, with 4 cloverleaf-design lashing bars (side) * 1 pair of 13.4 t UVV lashing rings in the front * 4 x 8 t lashing eyes recessed per side in the outer frame ----Ramps: * Aluminium approach ramps (10.6 t/pair), 2,800 x 470 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment at rear) ----Paintwork: * Reflective contour tape on the sides & rear * Frame hot-dip galvanized * Axles and drawbar painted black ----Info: Gedpfxel Tnwzo Ap Deiu * Load securing certificate according to DIN 30722-1 * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * -- Permissible total weight of 20,000 kg technically possible -- * New vehicle without first registration, with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Immediately available from Egstorf

Stav: nový, maximálna hmotnosť nákladu: 11 050 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2026, Výbava: ABS, zdvíhacie čelo, * Müller-Mitteltal KA-TA-R 14.4 tandem low-bed three-way tipper trailer with ramps * NEW VEHICLE * Now available immediately in RAL 9016 traffic white, * Leasing, financing, trade-in of your old trailer possible ---- * Reference number for inquiries: 11654 ---- * Remote diagnostics unit (RDÜ) with display option in truck via EBS signal * Side marker lights with blinker control * Gross weight: 14,400 kg, Payload: 11,050 kg * EBS 2S/2M * Galvanized floor 5m x 2.42m, drop sides 0.5m laser-welded, swingable, foldable and removable, prepared for later installation of extension sides * Lockable compartment under the tipping platform for loading ramp * Including 1 pair of aluminum approach ramps, 8t per pair, 3.57m * Chassis hot-dip galvanized, front wall hot-dip galvanized * 4 UVV lashings LC 5000daN front and rear + 8 lashing rings LC 3000daN recessed and foldable in the tipper floor (centered) * Excavator bucket rest made of hardwood * Two-step access ladder in front of the front wall (hot-dip galvanized) * Stepless height-adjustable drawbar, hot-dip galvanized, 40mm towing eye * Wide tires 385/55R 19.5 (set of 4), parabolic springs * Net hooks, screw-on rear stanchions, hot-dip galvanized * Guide cables for the rear drop side * Plastic toolbox on right-hand side of chassis frame * LED lighting system 12 + 24 Volt * 2 LED reversing lights at the rear of the trailer ---- * Lease-purchase price: * e.g., 560¤ for 60 months with no down payment, no residual value. An offer from our financing partner 'FM LeasingPartner.' Other terms with/without residual value or down payment possible * Request an offer from us! * We are Müller-Mitteltal authorized dealers * Free home delivery possible with timely order! ----Our opening hours Monday - Thursday: 08:00 - 17:00 Friday 08:00 - 15:00 Godpfxsyvxg Io Ap Deiu Outside these hours, we are available by arrangement. We speak German, English, Polish, French. Whatsapp

Stav: použitý, prvá registrácia: 06/2011, celková šírka: 25 500 mm,