Príves s pracovnou plošinouMÜLLER-MITTELTAL
T3 Profi 30,0 Neu, Baggerstiel, Federrampe
Príves s pracovnou plošinou
MÜLLER-MITTELTAL
T3 Profi 30,0 Neu, Baggerstiel, Federrampe
pevná cena bez DPH
42 500 €
(50 575 € brutto)
Rok výroby
2026
Stav
Nový
Umiestnenie
Egestorf 

Zobraziť obrázky
Zobraziť mapu
Základné údaje
Cena a lokalita
pevná cena bez DPH
42 500 €
(50 575 € brutto)
- Umiestnenie predajcu:
- Eichenstich 12, 21272 Egestorf, Nemecko

Volať
Technické detaily
- Maximálna hmotnosť nákladu:
- 23 830 kg
- Celková hmotnosť:
- 30 000 kg
- Konfigurácia náprav:
- 3 nápravy
- Dĺžka ložného priestoru:
- 8 460 mm
- Šírka ložného priestoru:
- 2 520 mm
Podrobnosti ponuky
- ID záznamu:
- A207-87-227
- Referenčné č.:
- 6316
- Naposledy aktualizované:
- dňa 18.12.2025
Popis
* T3 Profile 30.0:
* EBS braking system
* TPMS (Tire Pressure Monitoring System)
* Emergency release device for spring brake cylinders
* Drum brakes
* 3 x 11 t BPW Eco axles
* Parabolic leaf springs
* Mechanical rear axle compensation
* Side underrun protection
* Pivoting support legs at the rear on the chassis frame
* Mechanically adjustable warning sign systems front and rear
* Front: closed plastic fenders; rear: straight, galvanized steel fender skirts, each with spray protection
* Reflective contour tape on the sides and rear
* Hinged cover (hot-dip galvanized) for the toolbox inside the turntable platform
* Multi-voltage system
Iiodpfox Ipa Njx Afmek
* LED tail lights
* Removable beacon at the rear
* Drawbar with 40 mm towing eye and height adjustment via drawbar spring & turnbuckle
* 15-pin electrical connector
* Four stake pockets on each side (no stakes supplied) with integrated lashing points
* Load securing package includes: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 5 pairs of UVV swiveling and retractable lashing rings, loadable in all directions and recessed into the outer frame – corners rated 13.4 t, otherwise 10 t.
* 6 pairs of mechanical fold-out outriggers for total width of 3 meters (not in rear angle)
* Spreader planks stored in the middle of the loading area
* Excavator arm support above rear axle up to end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm support)
* One-piece mechanical loading ramps with spring mechanism (approx. 3,000 x 720 mm)
* Mechanical lateral ramp adjustment
* Loading area over turntable: approx. 1,960 x 2,520 mm
* Unladen loading height approx. 1,070 mm
* Rear loading area: approx. 6,500 x 2,520 mm
* Unladen loading height approx. 910 mm (incl. 860 mm approach angle)
* Chassis, turntable, drawbar, and ramps hot-dip galvanized
* Axles, springs, air tanks, etc. coated in black
* 235/75 R 17.5 twin tires
* 5,900 kg unladen weight
* Technically permissible gross weight of 30,000 kg
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer’s warranty
* Errors and prior sale excepted
* Available from calendar week 12/2026
* Sample image
Inzercia bola automaticky preložená a vyskytli sa nejaké chyby prekladu.
* EBS braking system
* TPMS (Tire Pressure Monitoring System)
* Emergency release device for spring brake cylinders
* Drum brakes
* 3 x 11 t BPW Eco axles
* Parabolic leaf springs
* Mechanical rear axle compensation
* Side underrun protection
* Pivoting support legs at the rear on the chassis frame
* Mechanically adjustable warning sign systems front and rear
* Front: closed plastic fenders; rear: straight, galvanized steel fender skirts, each with spray protection
* Reflective contour tape on the sides and rear
* Hinged cover (hot-dip galvanized) for the toolbox inside the turntable platform
* Multi-voltage system
Iiodpfox Ipa Njx Afmek
* LED tail lights
* Removable beacon at the rear
* Drawbar with 40 mm towing eye and height adjustment via drawbar spring & turnbuckle
* 15-pin electrical connector
* Four stake pockets on each side (no stakes supplied) with integrated lashing points
* Load securing package includes: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 5 pairs of UVV swiveling and retractable lashing rings, loadable in all directions and recessed into the outer frame – corners rated 13.4 t, otherwise 10 t.
* 6 pairs of mechanical fold-out outriggers for total width of 3 meters (not in rear angle)
* Spreader planks stored in the middle of the loading area
* Excavator arm support above rear axle up to end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm support)
* One-piece mechanical loading ramps with spring mechanism (approx. 3,000 x 720 mm)
* Mechanical lateral ramp adjustment
* Loading area over turntable: approx. 1,960 x 2,520 mm
* Unladen loading height approx. 1,070 mm
* Rear loading area: approx. 6,500 x 2,520 mm
* Unladen loading height approx. 910 mm (incl. 860 mm approach angle)
* Chassis, turntable, drawbar, and ramps hot-dip galvanized
* Axles, springs, air tanks, etc. coated in black
* 235/75 R 17.5 twin tires
* 5,900 kg unladen weight
* Technically permissible gross weight of 30,000 kg
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer’s warranty
* Errors and prior sale excepted
* Available from calendar week 12/2026
* Sample image
Inzercia bola automaticky preložená a vyskytli sa nejaké chyby prekladu.
Poskytovateľ
Poznámka: Zaregistrujte sa zadarmo alebo sa prihláste, aby ste získali všetky informácie.
Registrované od: 2001
Odoslať žiadosť
Telefón & Fax
+49 40 33... inzercie
Tieto inzeráty by vás mohli tiež zaujímať.
Váš inzerát bol úspešne odstránený
Došlo k chybe




