Nízkozdvižný prívesMÜLLER-MITTELTAL
T3 Profi 30,0 Neu, Baggerstiel, Luftfed.
Nízkozdvižný príves
MÜLLER-MITTELTAL
T3 Profi 30,0 Neu, Baggerstiel, Luftfed.
Pevná cena plus DPH
47 950 €
(57 060 € brutto)
Rok výroby
2026
Stav
Nový
Umiestnenie
Egestorf 

Základné údaje
Cena a lokalita
Pevná cena plus DPH
47 950 €
(57 060 € brutto)
- Umiestnenie predajcu:
- Eichenstich 12, 21272 Egestorf, Nemecko

Zavolať
Technické detaily
- Maximálna hmotnosť nákladu:
- 23 700 kg
- Celková hmotnosť:
- 30 000 kg
- Konfigurácia náprav:
- 3 nápravy
Podrobnosti ponuky
- ID inzerátu:
- A104-34-320
- Referenčné číslo:
- 5902
- Aktualizácia:
- naposledy dňa 06.05.2026
Popis
* T3 Profi 30.0:
* Wabco EBS-E (electronic braking system)
* TPMS (Tire Pressure Monitoring System)
* Emergency release mechanism for spring-loaded cylinders
* Drum brakes
* 3 x 11 t BPW Eco axles
* Air suspension, raising and lowering, with RtR valve
* Smart-Board as infotool
* Side underrun protection
* Swing-out supports at the rear on the chassis frame
* Mechanically adjustable warning panel sets front and rear
* Front axle: enclosed plastic mudguards; rear axle: straight galvanized steel mud flaps with spray protection
* Reflective conspicuity tape on the sides and rear
* Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform
* LED tail lights
* Rotating beacon (removable) at the rear
* Drawbar with 40 mm towing eye and height adjustment via tension spring and turnbuckle
* 15-pin electrical plug
* Four stake pockets per side, each with simultaneous 2 t lashing capability
* Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left and right on the main frame of the turntable platform; 5 pairs of UVV lashing rings, pivotable and lowerable, loadable in all directions and recessed in the outer frame – in the corners 13.4 t, otherwise 10 t
* 6 pairs of mechanical folding outriggers for 3 m overall width (excluding rear taper)
* Extension planks stored in the center of the load area
* Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm), laterally adjustable
* Excavator arm rest above rear axle up to end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm rest)
* Load area above turntable: approx. 1,960 x 2,520 mm
* Loading height unladen: approx. 1,070 mm
* Rear load area: approx. 6,500 x 2,520 mm
* Loading height unladen: approx. 910 mm (incl. 860 mm drive-up slope)
* Chassis, turntable, drawbar, folding extensions & loading ramps hot-dip galvanized
* Axles, turntable, air tanks etc. painted in black
Bedpfx Asl Tq Eush Nswn
* Tyres 235/75 R 17.5
* Payload approx. 24,000 kg with 30,000 kg gross weight
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
* Available from approx. week 32/2026
* Sample images
Inzerát bol automaticky preložený. Chyby v preklade sú možné.
* Wabco EBS-E (electronic braking system)
* TPMS (Tire Pressure Monitoring System)
* Emergency release mechanism for spring-loaded cylinders
* Drum brakes
* 3 x 11 t BPW Eco axles
* Air suspension, raising and lowering, with RtR valve
* Smart-Board as infotool
* Side underrun protection
* Swing-out supports at the rear on the chassis frame
* Mechanically adjustable warning panel sets front and rear
* Front axle: enclosed plastic mudguards; rear axle: straight galvanized steel mud flaps with spray protection
* Reflective conspicuity tape on the sides and rear
* Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform
* LED tail lights
* Rotating beacon (removable) at the rear
* Drawbar with 40 mm towing eye and height adjustment via tension spring and turnbuckle
* 15-pin electrical plug
* Four stake pockets per side, each with simultaneous 2 t lashing capability
* Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left and right on the main frame of the turntable platform; 5 pairs of UVV lashing rings, pivotable and lowerable, loadable in all directions and recessed in the outer frame – in the corners 13.4 t, otherwise 10 t
* 6 pairs of mechanical folding outriggers for 3 m overall width (excluding rear taper)
* Extension planks stored in the center of the load area
* Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm), laterally adjustable
* Excavator arm rest above rear axle up to end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm rest)
* Load area above turntable: approx. 1,960 x 2,520 mm
* Loading height unladen: approx. 1,070 mm
* Rear load area: approx. 6,500 x 2,520 mm
* Loading height unladen: approx. 910 mm (incl. 860 mm drive-up slope)
* Chassis, turntable, drawbar, folding extensions & loading ramps hot-dip galvanized
* Axles, turntable, air tanks etc. painted in black
Bedpfx Asl Tq Eush Nswn
* Tyres 235/75 R 17.5
* Payload approx. 24,000 kg with 30,000 kg gross weight
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
* Available from approx. week 32/2026
* Sample images
Inzerát bol automaticky preložený. Chyby v preklade sú možné.
Poskytovateľ
Poznámka: Zaregistrujte sa zadarmo alebo sa prihláste, aby ste získali všetky informácie.
Registrovaný od: 2001
170 Inzeráty online
Odoslať dopyt
Telefón & Fax
+49 40 33... inzercie
Tieto inzeráty by vás mohli tiež zaujímať.
Váš inzerát bol úspešne odstránený
Došlo k chybe

























