Nízkozdvižný príves

MÜLLER-MITTELTAL T3 Profi 30,0 Neu, Baggerstiel, voll hydr. Rampe

Stav: nový, maximálna hmotnosť nákladu: 23 830 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle compensation * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning sign panels front and rear * Front axle with closed plastic fenders and rear axle with straight galvanized steel mudguards, each with spray protection * Reflective contour tape on the sides and rear * Hinged (hot-dip galvanized) toolbox lid on the turntable platform * Multi-voltage system * LED rear lights * Removable beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via traction spring & turnbuckle * 15-pin power connector * Four stake pockets on each side (stakes not included) with simultaneous lashing options * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the turntable platform, 5 pairs of UVV lashing rings—pivoting and lowerable, loadable in all directions and integrated into the outer frame (13.4 t in the corners, otherwise 10 t) * 6 pairs of mechanical swing-out outriggers for 3 m total width (except for the rear slope) * Extension planks stored in the center of the loading area * Excavator arm rest above the rear axle up to the end crossmember, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm rest) * Hydraulically one-piece loading ramps (approx. 3,000 x 720 mm) * Hydraulic lateral ramp shifting * Loading area above the turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in black Ijdjx Ipbtspfx Afmjik * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Permissible gross vehicle weight technically possible: 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from CW 12 / 2026 * Sample images

Stav: nový, maximálna hmotnosť nákladu: 23 830 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle (VA): closed plastic mudguards; rear axle (HA): straight galvanized steel fenders, both with splash protection * Reflective contour tape on sides and rear * Hinged lid (hot-dip galvanized) for toolbox in the turntable platform * Multi-voltage system * LED rear lights Iedpfx Aox Ipb Hefmjik * Removable rotating beacon at rear * Tow bar with 40 mm towing eye and height adjustment via drawbar spring and turnbuckle * 15-pin electrical connector * Four stake pockets on each side (stakes not included), each with tying points * Load securing package includes: 2 lashing eyes (6.4 t) at front left and right on the main frame of the turntable platform, 5 pairs of UVV-compliant lashing rings, swiveling and lowerable, loadable in all directions, recessed in the outer frame – 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for total width of 3 m (not in the rear bevel) * Widening boards stored in center of loading area * Excavator arm rest over the rear axle up to end crossmember, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings at the sides of the excavator arm rest) * Hydraulic one-piece ramps (approx. 3,000 x 720 mm) * Hydraulic lateral ramp displacement * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm approach incline) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * -- Gross permissible weight of up to 30,000 kg technically possible -- * Vehicle is fully hot-dip galvanized * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from calendar week 12 / 2026 * Sample images