Humbaur Hs 105020 Bs+11900Kg+Rampen+Tpms kúpiť použité (5 806)

Stav: nový, pohotovostná hmotnosť: 10 700 kg, maximálna hmotnosť nákladu: 38 800 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 r 17,5, farba: sivo-čierny, Výbava: ABS, Gooseneck: •Gooseneck with beveled front corners at 45° and rear chamfer approx. 750 mm x 10° •3 pairs of lash rings •30 mm thick hardwood decking Extendable Load Platform: •Extendable load platform with rear chamfer approx. 1,000 mm x 8° •Cut-outs in the outer frame of the load platform for attaching lashing straps •Approx. 48 mm thick hardwood decking, over the axles with chequer plate covering Two-piece Steel Ramps: •One pair of galvanized, two-piece steel ramps with approx. 48 mm thick hardwood covering •Ramps with hydraulically foldable ramp sections, hydraulic lifting system, and hydraulic lateral adjustment •Maximum capacity per pair: approx. 40,000 kg Axles and Tyres: •BPW axles and suspension, 2 rigid axles, 1 trailing steering axle •Technical axle load: 12,000 kg •Electromagnetic reverse lock, activated via reverse gear and manually •Air suspension with lift and lower valve •Axle tools •235/75 R 17.5 3PMSF Braking System: •WABCO braking system according to EU regulations with EBS-E Hodpfxjhlz S Ne Anrel Paintwork: •First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component zinc dust primer •High-quality, single-tone 2-component topcoat in MB 7350 Novagrau •Rear section metalized and painted in RAL 9010 Landing Legs: •JOST landing gear with 2-speed gearbox for 24 t lifting capacity (50 t test load). Steel Construction: •Steel construction made from high-strength fine-grained steels •Steel grades: •S355J2+N/S355MC •S690QL/S700MC Electrical System: •Electrical system complying with EU regulations, 24 volt lighting •ASPÖCK-UNIBOX on the front connection board with 24N, 24S & 15-pin sockets Accessories Included: •One spare wheel with holder •One galvanized steel front wall approx. 400 mm high •Yellow-red air couplings on the galvanized front connection board •4 wheel chocks •A holder for a warning beacon at the rear of the trailer •Recess in the rear gooseneck area for ALU approach ramps •Galvanized folding supports under the chamfer of the load platform •Cover plates to bridge the gap between the ramps and the load platform •White reflective tape as per EU regulations on the sides, extension, and rear (red) •Electro-hydraulic unit at the rear, under the load platform •One holder each on the gooseneck and on each ramp, left and right, for warning signs incl. socket •Ramp control valves mounted on the right-hand side of the trailer •On the gooseneck, ALU side and rear boards approx. 2,440 x 400 mm •Rear galvanized plug-in stakes are removable (body length approx. 2,560 mm) •Four warning panels, extendable by approx. 400 mm, each with a position light •3 pairs of WADER container pockets in the platform for a 20ft, 30ft, or 40ft container •6 pairs of stake pockets (100x50 mm) in the outer frame of the load platform •Galvanized extensions, extendable by approx. 230 mm per side •20 x 20 mm square toehold strips every 200 mm on the outer frame of the platform chamfer •Sanded surface finish painted on the chequer plates, king pin, and load platform as anti-slip protection •Load gauge for determination of axle loads, including load diagram •HRM metallization (High Resistance Metallisation) of the outer frame •Complete steel structure shot-blasted, then the defined visible areas metallized with ZINACOR 850 (zinc 85% - aluminium 15%) by hot finish

Stav: nový, pohotovostná hmotnosť: 15 550 kg, maximálna hmotnosť nákladu: 47 450 kg, celková hmotnosť: 63 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 800 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck in SNT design for optimizing loading area length, approx. 3,700 mm long - Rear gooseneck with approx. 1,000 mm x 10° bevel Loading Area: - Extendable loading area, approx. 8,800 mm in length, with an approx. 500 mm x 10° bevel at the rear - A recess in the loading area and the bevel, designed to accommodate the excavator stick - Pneumatic locking with conical locking bolts and reinforced locking positions Hsdpjk Aht Ujfx Anrjl - Hardwood decking on the beveled section of the loading area Ramps: - 1 pair of two-part steel ramps, approx. 4,350 mm long and 900 mm wide - Ramps with hardwood decking - Hydraulically foldable ramp ends - Each ramp hydraulically adjustable outwards by approx. 235 mm and inwards by approx. 215 mm - Square climbing bars 20 x 30 mm, positioned approx. every 200 mm on the outer frame of the ramp Axles and Suspension: - BPW axles and suspension, 1st axle steering ahead, all other axles hydromechanically forced steered - Technical axle load: 12,000 kg - 1st axle with electromagnetic reverse lock, activated via reverse gear and also manually - Air suspension with lift and lower valve - Twin tires 235/75 R 17.5 - TPMS tire pressure monitoring system according to ECE R141 - TPMS sensors mounted on all wheels including spare wheels Accessories included: - Plug-in steel front wall, approx. 400 mm high - 3kW electro-hydraulic power unit for hydraulic operations, excluding hydraulic winches - Parking location on the gooseneck for warning panels when not in use - 1 spare wheel - On the gooseneck: 1 pair of plug-in anodized ALU side boards, approx. 400 mm high - Plug-in anodized ALU rear board on the gooseneck, approx. 400 mm high - On the gooseneck: approx. 40 mm thick hardwood decking, over the kingpin tread plate covering - 2" kingpin - Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide - 4 wheel chocks - Mechanical landing gear with 2-speed gearbox and crank - JOST Modul B – static test load = 50,000 kg - 1 intermediate table, approx. 300 mm wide - Extendable galvanised outriggers, approx. 230 mm per side - Wheel recesses with square climbing bars - ALU covers for the wheel recesses - 1 pair of mechanical rear supports - Remote steering system operable from the front and rear via cable remote control, with single-track control for axles - 1st axle with automatic lift axle function - Central lubrication system with 1 pump, brand BEKAMAX - Radio remote control for rear steering, additional to the cable remote, with 2 indicator lights on receiver for single-track control - Wabco Smart Board System - 4 warning panels, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and brackets for rotating beacon

Stav: nový, pohotovostná hmotnosť: 10 900 kg, maximálna hmotnosť nákladu: 37 100 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 890 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17.5, farba: sivý, prevádzková hmotnosť: 10 900 kg, Výbava: ABS, Gooseneck: - Gooseneck in SNT design for optimizing the loading platform length, approx. 3,700 mm long, rear chamfer approx. 1,000 mm x 6° - Technical fifth wheel load: 18,000 kg - For tractor units: 4 x 2 and 6 x 2 Loading Platform: - Loading platform approx. 9,600 mm long with rear chamfer approx. 900 mm x 6° - Platform behind gooseneck hydraulically liftable/lowerable, approx. 3,000 mm long, load capacity up to approx. 9,000 kg - Grating and 5 mm steel plate reinforcement on the chamfered section as additional strengthening Ramps: Hsdpfx Anjuadk Nersl - One pair of two-piece AXS steel ramps, approx. 4,675 mm long, 900 mm wide - Grating surface - Hydraulically foldable ramp tips - Ramps can be hydraulically shifted individually approx. 235 mm outwards and approx. 365 mm inwards - Painted anti-slip sand-coating on ramp outer frame and ramp tip - Flashing lights mounted on ramp tips with switch next to ramp control panel - Quick-release ramp locks for securing in transport position Axles, Suspension, and Tyres: - BPW axles and suspension, 1st and 2nd axles fixed, 3rd axle self-steering - 1st axle with starting aid - Operated via brake pedal of the tractor unit - Technical axle load: 12,000 kg - Air suspension with raise/lower valve - 235/75 R 17.5 - TPMS (Tyre Pressure Monitoring System) to ECE R 141 specification - TPMS sensors fitted in all wheels, including spares Braking System: - WABCO EBS-E braking system complying with EU regulations Paintwork: - Trailer MB 7350 Nova Grey Included Accessories: - Pin-type steel front wall, approx. 400 mm high - 3 kW electro-hydraulic power unit for hydraulic operations (excluding hydraulic winches) - Gooseneck guide plate for fifth wheel, approx. 500 mm wide - JOST Modul B landing gear - static test load = 50,000 kg - Continuous grating with 5 mm steel baseplate as additional reinforcement - Painted sand-coating - Cut-outs in outer frame of platform and lift bed for attaching hydraulic ramp control valves on right side of trailer - 2" king pin - Central lubricating system with 1 pump, brand BEKAMAX - On gooseneck: 1 pair removable ALU side walls, approx. 400 mm high, anodized - Electric cable winch, approx. 5,400 kg pulling force, with radio remote control - Steel cable approx. 24 m long, diameter approx. 9.5 mm, incl. cable pressure roller - WABCO Smart Board system - 4 extendable warning boards, approx. 423 x 423 mm, extendable by approx. 400 mm

Stav: nový, pohotovostná hmotnosť: 13 500 kg, maximálna hmotnosť nákladu: 51 500 kg, celková hmotnosť: 69 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 800 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 r17.5, farba: sivý, Výbava: ABS, Gooseneck: Gooseneck in SNT design for optimizing the loading platform length; length approx. 3,700 mm. Gooseneck rear bevel approx. 1,000 mm x 10°. Loading platform: Telescopic loading platform, length approx. 8,800 mm, with rear bevel approx. 500 mm x 10°. Hjdpfx Anek Ahugjrel Recess in the bevel as well as extending into the loading platform to accommodate the excavator's bucket linkage. Pneumatic locking with conical bolt and reinforced lock positions. Supply lines are protected within the telescopic beam and adapt to the respective platform length. Ramps: 1 pair of two-part steel ramps, approx. 4,350 mm x 900 mm. Hydraulically folding ramp tips. Each ramp can be hydraulically shifted approx. 235 mm outward and approx. 215 mm inward. Axles and suspension: BPW axles and suspension, two rigid axles, two self-steering axles. Electromagnetic reverse lockout, activated via reverse gear and manually. Air suspension with raise/lower valve. Axle tools. Tyres: 235/75 R17.5 3PMSF, dual-mounted. Load index: 143/141J (144/144F). Braking system: WABCO brand braking system, EBS-E, compliant with EU regulations. Lighting system: 24-volt lighting system in "ASPÖCK-NORDIK full LED." Metal finishing: Standard HRM metallization of the outer frame. Complete steel structure shot-blasted, then all defined visible surfaces hot-coated with ZINACOR 850 (zinc 85% - aluminum 15%). Steel structure: Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Welders certified to DIN-EN 287-1. MAG welding method according to EN ISO 4063. Protective gas M21 according to EN ISO 14175. Standard accessories included: Removable front wall, steel, height approx. 400 mm. ASPÖCK-UNIBOX at the front connection strip with 24N, 24S, & 15-pin sockets. 24N connection per ISO-118524S connection per ISO-373115-pin connection per ISO-12098. Round NATO socket at the front connection strip. Power cable for supplying the electro-hydraulic unit and/or electric winch (35 mm², 3.5 m long) between trailer and truck tractor with connector (NATO-NATO). 3 kW electro-hydraulic unit for operating hydraulic functions, except hydraulic winches. 1 spare wheel with mounting adapter. External beam of gooseneck with fixing holes for bolted lashing rings; first hole approx. 200 mm from the front, then every approx. 400 mm. 2 pairs of screw-in lashing rings included. Fixing hole at the upper rear of the gooseneck external beams for a bolted lashing ring. 1 pair of screw-in lashing rings. Approx. 40 mm thick hardwood flooring over the gooseneck. On the gooseneck, 1 pair of removable, anodized aluminum sideboards, approx. 400 mm high. On the gooseneck, 1 removable anodized aluminum rear wall, approx. 400 mm high. 2” king pin. Guide plate on gooseneck for fifth wheel plate, approx. 500 mm wide. 4 wheel chocks with holders. Mount for aluminum approach ramps. Mechanical landing legs with 2-speed gearbox and crank. Approx. 50 mm hardwood floor, continuous on the platform and interrupted between the axles. Platform locking with conically welded locking profiles every 250 mm, including pre-tensioning plate. Long holes at the front of the loading platform for hook-in and relocatable bridging elements. 1 intermediate table with recessed platform, approx. 300 mm wide for the extension tube with large cross-section with steel covering. Front and rear with long holes...

Stav: nový, pohotovostná hmotnosť: 13 250 kg, maximálna hmotnosť nákladu: 47 550 kg, celková hmotnosť: 60 800 kg, konfigurácia náprav: 3 nápravy, zavesenie: vzduch, veľkosť pneumatiky: 245/70 r17.5, farba: sivý, Výbava: ABS, Gooseneck: Gooseneck with rear chamfer of approx. 750 mm x 10°. 3 pairs of lashing rings 30 mm thick hardwood flooring Extendable loading platform: Extendable loading platform with rear chamfer of approx. 1,000 mm x 8° 5 pairs of hinged lashing rings (can be folded outward) 3 pairs of hinged lashing rings (can be folded outward) 1 pair of horizontal lashing rings at the front of the loading platform Cutouts in the outer frame of the loading platform for hooking in tensioning straps Hardwood floor approx. 48 mm thick, anti-slip checker plate over the axles Two-part steel ramps: One pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood overlay. Ramps with hydraulically extendable and retractable ramp sections, hydraulic lifting device, and hydraulically adjustable. Maximum load capacity per pair: 40,000 kg Landing legs: JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test capacity) Axles and tires: BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanical forced steering Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tools Tires: 245/70 R 17.5 Brake system: Brake system compliant with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit Steel construction: Steel construction made of high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Paintwork: Top-quality, durable corrosion protection of the standard shot-blasted welded frame guaranteed by a two-component (2K) zinc-rich primer High-quality single-color 2-component (2K) top coat in Nova Grey Rear section metalized and painted in RAL 9010 (pure white) No metallic paints possible Electrical system: Electrical system according to EU specifications, 24 volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets Connection as per ISO 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Accessories included: 2" kingpin Hjdpsl Uxdkefx Anrel Galvanized steel front wall approx. 400 mm high Yellow-red air couplings on the galvanized connection bar at the front 4 wheel chocks with holder at the front wall One spare wheel with holder in front of the front wall Electro-hydraulic power pack Remote steering from front and rear via cable remote control with push-button operation and single trace axle control Mount at the rear of the gooseneck for ALU loading ramps European reflective panels (red-yellow) at the rear of the trailer White reflective striping according to EU regulations at the side, at the extension element, and rear in red On the gooseneck and ramps left and right, each with one bracket for warning signs including socket A bracket for a revolving beacon at the rear of the trailer Galvanized folding supports under the chamfer of the loading area Control valves for ramps mounted on the right side of the trailer Cover plates for bridging the gap between ramps and loading area One mudflap at the rear of the trailer Manual and documentation on USB stick Central lubrication system BEKAMAX (Pico) with standard NLGI-2 grease and removable pump guard On the gooseneck, removable ALU side boards and rear board approx. 2,440 x 400 mm Rear galvanized removable stanchions, body length approx. 2,560 mm A toolbox INOX 1,350x400x400 on the gooseneck, box covers oil fill 4 pairs of WADER container locks in the loading platform for one

Stav: nový, maximálna hmotnosť nákladu: 49 000 kg, celková hmotnosť: 60 800 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 r 17.5, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck with chamfered front corners at 45° and rear chamfer of approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable Loading Area: - Extendable loading area with rear chamfer of approx. 1,000 mm x 8° - 5 pairs of fold-out lashing rings on the outside (LC 5,000 daN) - 3 pairs of fold-out lashing rings on the outside (LC 10,000 daN) - 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) - Cut-outs in the external frame of the loading area for attaching tie-down straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, with chequered plate covering over the axles Detachable Two-Part Ramps: - One pair of galvanized, two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood overlay - Ramps with hydraulically folding ramp sections, hydraulic lift and hydraulically adjustable side shift - Max. load per pair: 40,000 kg Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and Tyres: - BPW axles, two rigid axles, two self-steering axles, air-suspended, with drum brakes, lifting/lowering function - The self-steering axles can be locked via electromagnetic reverse lock through reverse gear or manually - Axle tools - Tyres: 235/75 R 17.5 Brake System: - Brake system in accordance with EU regulations with EBS-E (4S3M) Steel Construction: - Steel construction made from high-strength fine-grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Paintwork: - Premium and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc-rich primer - High-quality 2-component (2K) topcoat in single-tone Novagrey Electrical System: - Electrical system according to EU regulations, ASPÖCK-NORDIK (ASS3) 24 Volt lighting - ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets Included Accessories: - 2" king pin - One galvanized steel front wall, approx. 400 mm high - One spare wheel with holder in front of the front wall - Yellow and red air couplings on galvanized front terminal strip - 4 wheel chocks with holder on the front wall - Mounting at the rear of the gooseneck for ALU approach ramps - Galvanized folding supports under the chamfered loading area - Bracket for a rotating beacon - Cover plates to bridge the gap between ramps and loading area - White reflective tape according to EU regulations on the sides, red at the rear and on the extension - Electro-hydraulic power unit - At the gooseneck and on the ramps, left and right, each with mounting for warning panels including socket - Control valves for the ramps mounted on the right side of the semi-trailer - Mudflap at the rear of the trailer - User manual and description on USB stick - Removable ALU side boards and rear panel on the gooseneck, approx. 2,440 x 400 mm - Rear galvanized stanchions removable (body length approx. 2,560 mm) - 4 pairs of WADER container pockets in the loading area for a 20 ft, 2x 20 ft or a 40 ft container - 7 pairs of stake pockets for 100 x 50 mm stakes in the external frame of the loading area - Extensions, galvanized, retractable by approx. 230 mm per side - Lift axle on the front axle with control - 20 x 20 mm square climbing strips - BEKAMAX central lubrication system - Four warning panels extendable by approx. 400 mm (approx. 423 x 423 mm) Hsdpfxeh Etf Ro Anrol

Stav: nový, pohotovostná hmotnosť: 15 420 kg, maximálna hmotnosť nákladu: 61 080 kg, celková hmotnosť: 76 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 900 mm, veľkosť pneumatiky: 235/75/r17,5, farba: sivý, Výbava: ABS, Gooseneck: Gooseneck with rear bevel of approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading Area: Extendable loading area with rear bevel of approx. 500 mm x 8° 8 pairs of folding outward lashing rings 1 pair of flat lashing rings at the front of the loading area Cutouts in the outer frame of the loading area for securing load straps Approx. 48 mm thick hardwood flooring, non-slip checker plate cover above the axles Two-piece Steel Ramps: One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering. Ramp parts are hydraulically foldable, equipped with hydraulic lifting mechanism and hydraulic lateral adjustment. Maximum load per pair: 50,000 kg. Landing Legs: • JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: BPW axles and suspension, 4th and 5th axle steering Technical axle load: 12,000 kg 4th and 5th axles with electromagnetic reverse lock activated via reverse gear and manual operation Tyres 235/75 R 17.5 3PMSF Braking System: Braking system according to EU regulations with EBS-E (4S3M) Sockets and Lighting: Electrical system according to EU regulations, 24-volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets Connections according to ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Hodpfx Anel Sl Izerel Paintwork: First-class and durable corrosion protection, achieved by standard shot-blasted welded frame with a 2-component (2K) zinc dust primer High-quality single color 2-component (2K) topcoat in MB 7350 Novagrau Rear section metallized and painted in RAL 9010 (Pure White) Metallic lacquer not available Steel Structure: Steel construction made from high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Accessories: One spare wheel with bracket in front of the bulkhead 2" kingpin Galvanized steel front wall approx. 400 mm high Yellow-red air couplings on the galvanized front connector strip 2 wheel chocks with holders on the front wall Provision at the rear of the gooseneck for ALU drive-on ramps Bracket for a beacon at the rear of the trailer Galvanized supports under the rear bevel of the loading area White reflector tape according to EU regulations on the sides, at the extension and rear red Electro-hydraulic unit at the rear under the loading area On gooseneck and rear panel (left and right) bracket for warning signs incl. socket Control valves for the ramps installed on the right side of the trailer A mud flap at the rear of the trailer Manual and description on USB stick 3.5" kingpin supplied loose On the gooseneck, plug-in ALU side walls and rear wall approx. 2,440 x 400 mm (LxH) Rear galvanized plug-in stakes are removable (Length of the structure approx. 2,560 mm) 3 pairs of WADER container pockets on the loading area for one 20' (30') or a 40' container 6 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading area Galvanized extensions, extendable by approx. 230 mm per side Lifting axle on the front axle, control via TEBS-E depending on current axle load and loading status Square climb strips 20 x 20 mm, every 200 mm on the outer frame of the loading area bevel On the checker plates, above the kingpin and the loa

Stav: použitý, prvá registrácia: 08/1998, celková dĺžka: 16 000 mm, celková šírka: 2 550 mm, Rok výroby: 1998, GOLDHOFER STZ -TL 3 -33/80 3-nápravový (labutí krk) polonízky náves s 3 riadenými nápravami, so sklopnou plošinou a hydraulickými rampami NÁVES BOL OBRÁBENÝ PIESKOM A LAKOVANÝ!! • ABS • 3 x BPW ECO-Plus vzduchom odpružené nápravy • 3 x riadené nápravy • Zdvíhacie/spúšťacie zariadenie • Hydraulické, dvojdielne nájazdové rampy • Hydraulicky spúšťateľná plošina • Rozšíriteľný na 3 m šírky • Výstražné tabule • Konektor NATO pre elektrickú/hydraulickú pumpu • Celková dĺžka: 16.000 mm • Pohotovostná hmotnosť: 15.900 kg • Celková prípustná hmotnosť: 48.000 kg (technicky možné 48.000 kg) • Nosnosť: 32.100 kg • 4 x manometre zaťaženia náprav • Dvojmontáž pneumatík: 235/75 R17,5 Hedpfx Aswpknwonrjl - STK a kontrola bezpečnosti: !! nové !! - Nemecké vozidlo! Chyby a medzipredaj vyhradené!

Stav: nový, pohotovostná hmotnosť: 15 900 kg, maximálna hmotnosť nákladu: 63 500 kg, celková hmotnosť: 68 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 12 700 mm, šírka ložného priestoru: 2 740 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75/r17,5, farba: sivý, prevádzková hmotnosť: 52 100 kg, Výbava: ABS, Gooseneck: Gooseneck in SNT design to optimize the loading area length, approx. 3,300 mm long, rear with chamfer approx. 1,000 mm x 10° Technical fifth-wheel load: 23,000 kg For tractor units: 6x2, 6x4, and 8x4 Loading Area: Extendable loading area, approx. 9,400 mm long with rear chamfer approx. 500 mm x 10° A recess in the loading area and chamfer for the excavator dipper stick, approx. 3,850 x 950 x 210/290 mm Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the respective loading length Axles and Tyres: BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanically forced-steered Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tools 235/75 R 17.5 3PMSF twin tyres Load index 143/141J (144/144F) Two-piece Steel Ramps: One pair of two-piece steel ramps approx. 4,350 mm long and approx. 900 mm wide Hardwood covering Hydraulically folding ramp tips; each ramp can be hydraulically shifted approx. 235 mm outward and approx. 215 mm inward Braking System: WABCO EBS-E brake system in accordance with EU regulations Sockets and Lighting: 24-volt lighting system Full Metallization: Complete HRM metallization with ZINACOR 850 for maximum corrosion protection Surface Treatment: Entire steel structure automatically blast-cleaned with shot wheels after welding Second blast cleaning with corundum for optimum coating adhesion Final painting in single-color Nova Gray with two coats of 2K paint; cavities then sealed with special wax Rims in silver gray Steel Structure: Steel structure made of high-strength fine-grain steels Steel grades: S355J2+N/S355MC S690QL/S700MC Accessories: Hodemfqi Iepfx Anrol Detachable steel front wall, approx. 400 mm high Supply line connection rail for tractor unit Coiled cable to supply the electro-hydraulic power unit and/or electric winch between semi-trailer and tractor unit with plug; electro-hydraulic unit for controlling hydraulic functions, except hydraulic winches Gooseneck side members with mounting holes for bolted lashing rings First hole approx. 200 mm from the front, subsequently every approx. 400 mm A mounting hole in the upper rear area of the gooseneck side member for a bolted lashing ring Approx. 40 mm thick hardwood covering above the gooseneck, checker plate covering above the kingpin Guide plate from the gooseneck for the fifth-wheel plate, approx. 500 mm wide Continuous 50 mm thick hardwood covering on the loading platform and interrupted hardwood between the axles Loading platform locking with conically welded locating profiles every 250 mm, including prestressing plate Slotted holes for insertable and adjustable bridging elements: on the fixed part behind the gooseneck at the front of the loading area 1 movable intermediate table for the extension tube with large cross-section Control valves for hydraulic ramps on the right side of the vehicle Central lubrication system with 1 pump, with standard grease in accordance with NLGI-2 Radio remote control for operating the steering, in addition to the cable remote control; receiver features two indicator lights for single-track monitoring

Stav: použitý, maximálna hmotnosť nákladu: 14 100 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 05/2012, Rok výroby: 2012, Interné číslo vozidla: G200185 Nemecké vozidlo Na našom dvore v Kaufungen - Kassel, okamžite k dispozícii Viac informácií na: * Luis Lucena (Nemecky, Anglicky, Španielsky, Francúzsky) * Viktoria Sologubova (Poľsky, Rusky, Ukrajinsky, Anglicky) Pohotovostná hmotnosť: 3 900 kg Celková prípustná hmotnosť: 39 000 kg Zmena údajov vyhradená. Radi prijmeme vaše ojazdené vozidlo na protiúčet. Možnosť financovania priamo u nás. GOLEC NUTZFAHRZEUGE GMBH Hovoríme: nemecky, anglicky, španielsky, poľsky, ukrajinsky, rusky, bulharsky. Hjdpfxjwcuzbo Anrol

Stav: použitý, Rok výroby: 2010, prevádzkové hodiny: 5 000 h, Výbava: oceľové pásy,

Stav: nový, maximálna hmotnosť nákladu: 8 500 kg, celková hmotnosť: 11 990 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Výbava: ABS, * KA-TA-R 11.9 Masterline: * Front wall and floor hot-dip galvanized * Wabco ABS * Emergency release device for spring brake cylinders Hodpfeq Hg D Hox Anrel * Drum brakes, 2 x 7 t. Gigant axles * Parabolic springs with tandem equalizing unit * Height-adjustable (approx. 300 mm), hot-dip galvanized drawbar with 40 mm flanged towing eye * Jost mechanical landing gear at the front * 2 mechanical, hot-dip galvanized folding supports at the rear * 15-pin power connector * Multi-chamber tail lamps * Hot-dip galvanized bolted underrun protection * Tool box made of galvanized sheet steel, mounted right side * Plastic quarter mudguards * Hot-dip galvanized chassis * Steel pallet – three-way tipper body * Continuous white-painted side walls with upper internal tubular reinforcement, drop-down, without central posts, with side wall spring lifter * Drop-down tailgate, optionally swinging, with manual central locking * Hot-dip galvanized, bolted rear stanchions * Each corner fitted with 1 x 5 t lashing ring; each side with 4 x 3 t lashing eyes recessed into outer frame * 4 mm fine-grain steel floor plate * Net hooks * Rear mounting rail for drive-on ramps * Removable steel extensions, 500 mm high, three-way swinging * Body reinforced, with load securing certificate according to EN 12642 XL * 1 pair of aluminium drive-on ramps, approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Lockable rear storage compartment, recessed below the loading platform in the chassis * Axles, springs, air tanks, and landing gear painted in black * Tyres 285/70 R 19.5 * Side wall body colour RAL 9010 pure white * New vehicle with manufacturer warranty * Subject to errors and prior sale * Immediately available ex stock Egestorf at the A7

Stav: nový, maximálna hmotnosť nákladu: 27 940 kg, celková hmotnosť: 36 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2025, * Wabco-EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t axles * Air suspension with lifting and lowering function as well as RtR valve * Maneuvering aid for shunting purposes activated on the first axle via EBS – no truck-side installation required – when the lift axle is raised + 30 mm ride height * Smart-Board as infotool mounted on trailer with pressure sensors for total axle load display * Last axle as trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle from the driver's cab for maneuvering via EBS (without truck-side installation) * 2" king pin * 1 axle liftable Hsdpfx Aowh Hdxjnrol * Lateral underrun protection * Front aluminium drop-down supports and rear swing-down supports on the chassis * Alcoa LVL One aluminium rims * 15-pin electrical connector * LED lighting 12 / 24 V * Removable rear LED beacon * 2 additional LED reversing lights * 2 LED work lights mounted on trailer sides – without truck-side installation * 7-pin socket at rear for overlength lighting * Side marker lights with indicator activation * Tire pressure monitoring with display option in truck via EBS signal (no truck-side installation required) * Mechanically adjustable warning sign packages front and rear * Straight steel wheel arches * Saddle platform with 45° beveled front corners and front toolbox made of galvanized, powder-coated sheet steel W = 2,480 x H = 500 x L = 665 mm with top folding lid and side doors in the beveled corners * 400 mm high aluminium drop sides (RAL 9010 pure white) foldable and removable on the sides of the saddle platform * Rear wall -150 mm- slotted in high * Rear incline on saddle platform to lowbed approx. 700 mm long with checker plate, with a perforated strip at the end for hooking in aluminium loading ramps * Saddle platform and lowbed deck with 50 mm clamped wooden planks * Tread plate over the axles * Preparation for 3 storage compartments under the saddle platform for optional aluminium loading ramps * Swing arm as carrier for connection lines from truck to trailer * Load securing package consisting of: perforated outer frame on saddle platform, 45° angled with hole pattern for lashing equipment (2 t lashing force per point at a min. distance of 480 mm), 2 x 6.3 t recessed lashing rings on each side in the floor, 1 x 16.5 t lashing ring on each side in the approach slope from the low-bed platform to the saddle platform, 2 pairs of 16.5 t lashing rings on low-bed platform (1 x on longitudinal members after the cranking and 1 x over the middle axle next to the longitudinal member), 3 x 13.4 t lashing rings on each side on the outer frame (1 x at the start of the saddle platform cranking, 1 x at the start of the approach slope, 1 x at the end of the approach slope), 3 x 10 t lashing rings on each side (2 x between the front wheel recess and 1st axle, 1 x between 2nd and 3rd axle), 3 x 5 t lashing rings on each side bolted to the outer frames of the wheel recesses (2 on the front and 1 on the rear wheel recess) * Extended excavator boom trough from the end of the last rigid axle over the steering axle to the rear crossmember, continuous with internal reinforcement profile approx. W = 770 mm x D rear = 270 mm / Depth front 170 mm, with 2 x 6.4 t lashing rings each side in the excavator boom trough * 2 wheel recesses on each side, 390 mm deep and 640 mm wide for transport of wheel loaders with a wheelbase of 3,000 – 3,590 mm and tire diameter of 1,

Stav: použitý, konfigurácia náprav: 3 nápravy, prvá registrácia: 07/2020, dĺžka ložného priestoru: 5 750 mm, šírka ložného priestoru: 2 150 mm, výška ložného priestoru: 900 mm, rázvor náprav: 1 000 mm, typ prevodu: iný, kabína vodiča: iný, brzdy: iný, * Nemecký príves * 1. majiteľ * Stav viď fotografie * Špeciálny príves s trojitým (tridem) nápravovým podvozkom a delenou ložnou plochou * Predná nadstavba s dvojstranným elektricky vyklápateľným mrežovým nadstavcom * Za tým plošina/valník/náves na nízkej plošine + nájazdové rampy * Veľká ložná plocha s protišmykovými preglejkovými doskami a kotviacimi okami podľa DIN * Ideálny pre záhradníctvo, stavebníctvo a mnohé ďalšie odvetvia * Rozmery ložnej plochy: 3,75 m x 2,15 m x 0,35 m, hliníkové bočné zábrany * Užitočné zaťaženie: 2 230 kg * Kippovacia plocha: 2,00 m x 2,15 m x 0,90 m * Elektrický hydraulický výklop so sťahovacím ovládaním * Povolenie na 100 km/h * Výklopná plocha so zinkovanou oceľovou podlahou * Tridem (trojitá) náprava * Celková povolená hmotnosť: 3 500 kg * Pohotovostná hmotnosť: 1 270 kg * Užitočné zaťaženie: 2 230 kg Ak si želáte nové schválenie TÜV, radi Vám zašleme ponuku našich partnerských servisov. Naša ponuka je vo všeobecnosti BEZ novej TÜV kontroly, bez novej DGUV, bez novej SP, bez novej UVV. Ďalšie nákladné vozidlá nájdete na našej domovskej stránke pod Hovoríme nasledujúcimi jazykmi: nemecky, anglicky, poľsky, turecky Upozornenie: Ponúkame a zároveň dôrazne odporúčame osobnú obhliadku a kontrolu tovaru, aby sa predišlo nedorozumeniam ohľadom stavu a vhodnosti pre kupujúceho. Obhliadka a skúška sú možné kedykoľvek po dohode a sú výslovne vítané. Hedpfx Aoxnqv Asnrel Všetky informácie sú bez záruky. Za chyby a nesprávne údaje v ponuke sa neručí. Kupujúci je povinný sám sa presvedčiť o stave a výbave tovaru/vozidiel. Zmeny, medzipredaj a omyly vyhradené.

Stav: nový, pohotovostná hmotnosť: 12 300 kg, maximálna hmotnosť nákladu: 37 200 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R17.5, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 30 mm thick hardwood flooring Two-part steel ramps: - One pair of galvanized two-part steel ramps, approx. 3,185 x 1,420 x 1,250 mm, with grating surface - Ramps with hydraulically folding ramp sections, hydraulic lifting mechanism Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings - 30 mm thick hardwood flooring Two-part steel ramps: - One pair of galvanized two-part steel ramps, approx. 3,185 x 1,420 x 1,250 mm, with grating surface - Ramps with hydraulically folding ramp sections, hydraulic lifting mechanism - Maximum load per pair: 30,000 kg Loading platform: - Loading area with rear chamfer approx. 1,000 mm x 8° - Approx. 48 mm thick hardwood flooring, patterned steel plate covering above the axles Axles and tires: - BPW axles and suspension, two fixed axles, one self-steering axle - Air suspension with lifting and lowering valve - The self-steering axles can be locked via electromagnetic reverse gear interlock or manually - 235/75 R17.5 3PMSF tires Accessories included: - 1 spare wheel with holder - TPMS tire pressure monitoring system according to ECE R 141 - 2" king pin - One galvanized steel headboard - Yellow-red air couplings on the galvanized front connection bar - 4 wheel chocks with holders on the front wall - Mounts at the rear end of the gooseneck for ALU loading ramps - 3-height ALU boards - Galvanized folding supports under the chamfered loading area - Height-adjustable tarpaulin body (3,960 mm) - Galvanized headboard with a tensioning mechanism for the sliding curtain - Height adjustable by approx. 400 mm - "EDSCHA" brand roof movable forwards on ALU roof beam profiles, bolted to front and rear walls - 3 pairs of movable stakes in the loading area - The superstructure is hydraulically extendable to the left and right at the rear by approx. 750 mm - Sliding roof with upward-swinging portal beam - Sliding tarpaulin with a 700 mm surplus in length, tensioning straps spaced approx. 600 mm - Height of the top edge of the superstructure approx. 3,960 mm Hedpfx Anotvfkfjrjl - Operation with roof open is not permitted and will damage the tarpaulin - Cover plates for bridging the gap between ramps and loading platform - Electro-hydraulic power pack at rear, under the loading platform - Holders for warning signs including socket outlets at the gooseneck and at the ramps, left and right - Ramp control valves mounted on the trailer's right side - 6 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading platform - Lifting axle on the front axle - Grating surface in the sloped part of the loading platform C40/4 (point load 3.4 t on an area of 20 x 20 cm) - One INOX toolbox 565 x 290 x 810 mm, right side in driving direction between the axles - Painted sand layer on checker plates on the gooseneck and loading platform as slip protection - BEKAMAX (Pico) centralized lubrication system with NLGI-2 standard grease and removable pump guard - Four pull-out warning panels, approx. 423 x 423 mm, extendable by approx. 400 mm, with position lamp - Load gauge for axle load determination including load diagram - HRM metallization (High Resistance Metallisation) of the outer frame - Entire steel structure shot-peened, then specified visible surfaces hot finished with ZINACOR 850 metallization (Zinc 85% - Aluminium 15%)

Stav: použitý, pohotovostná hmotnosť: 10 000 kg, maximálna hmotnosť nákladu: 39 000 kg, celková hmotnosť: 49 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 10/2025, dĺžka ložného priestoru: 9 200 mm, šírka ložného priestoru: 2 550 mm, celková šírka: 2 550 mm, zavesenie: vzduch, veľkosť pneumatiky: 245/70 R 17,5, farba: sivý, Výbava: ABS, zdvíhacie čelo, Pre každú použitú náves dostanete aktuálnu a kompletnú inšpekčnú a funkčnú správu. Podvozok: -Stabilná zváraná oceľová rámová konštrukcia s predným krkom rámu a rovným ložným priestorom so zadným skosením cca 500x100 mm -Rámový krk 200 mm so skosenými rohmi vpredu -Skosený koniec husacieho krku cca 500 x 100 mm (protišmykové nákružky na vonkajšom ráme v oblasti zadného skosenia) -2 polohy pre kráľovský čap s vymeniteľným 2" kráľovským čapom Hedpfsxxl E Hox Anrjl -Vonkajší rám uzavretý smerom von s otvormi (tzv. dierovaný vonkajší rám) -Ložná plocha s výsuvným centrálnym rámom, vysúvateľná cca o 2 000 mm, s možnosťou zaistenia po 500 mm pneumatickým uzamykaním -Rám pred a po delení so stupňom 80x80 mm -Zosilnené vyhotovenie rámu / bodové zaťaženie v zasunutom stave v ťažisku -S bagrovou vaničkou (bez krytu), hĺbka cca 220 mm, šírka cca 600 mm, začiatok cca za 2. nápravou až po koniec vozidla -1 pár kolesových vaní medzi 1. a 2. nápravou s oceľovými poklopmi (poklopy s povrchovou úpravou Körapur), hĺbka cca 400 mm Rampen: -2 kusy dvojdielnych nájazdových rámp v špeciálnom vyhotovení s mechanickým predĺžením -Dĺžka cca 2 850 mm plus 1 850 mm, s hydraulickým zdvíhaním rámp (len v kombinácii s elektrohydraulickým agregátom) -Šírka cca 800 mm -Drevená výplň -Vrátane protišmykových nákružkov na nájazdových rampách -V prepravnej polohe zaistiteľné upínacími pásmi -Ovládanie pomocou riadiacej páky vzadu, montovanej vpravo na FR -Bočne hydraulicky posuvné Podlaha: -35 mm podlaha z dreva z červeného smreka s hliníkovými Omega profilmi Nápravy, riadenie a obutie: -Nápravy BPW s pružením vzduchovými vankúšmi, zaťaženie nápravy 10 t, priemer vankúša 360 mm -Brzdy S-cam 300/200 mm, bezazbestové brzdové obloženie -Automatické nastavovače ťažného zariadenia -Zdvíhacie a spúšťacie zariadenie s celkovým zdvihom cca 200 mm -2. prepravná pozícia cez guľový ventil +50 mm -1. náprava je zdvíhacia náprava (prepojená cez EBS), potvrdzovanie plne automaticky s mechanickou núdzovou aktiváciou cez tlačidlo na návesu -3. náprava ako vlečená náprava s elektrickou a mechanickou uzávierkou -12 oceľových diskových kolies, 10-otvorové, stredové uloženie -12 pneumatík 245/70 R 17,5 143/141J, bezdušové -Vrátane monitorovania tlaku v pneumatikách Príslušenstvo: -Na husacom krku odnímateľné bočnice a zadné čelo cca 400 mm vysoké -Držiak na rezervné koleso -Bočný hliníkový nárazník -4 podložky pod kolesá vrátane držiakov -Pozdĺžny držiak ŠPZ na zadnej časti -1 ECE tabuľka na zadnú časť, odnímateľná -11 párov ZK modulov 10t po bokoch: -2x na husacom krku -2x na ložnej ploche pred výsuvom -7x po výsuve -Výsuvné výstražné tabuľky, vrátane po 3 polohových svetlách, vpredu na výsuvných nohách a vzadu pred koncovou časťou, plynulo výsuvné až do šírky ložného priestoru 4 500 mm -4 ks držiakov do vreciek pre výstražné tabuľky, zasúvateľné do ložnej plochy -6 párov vreciek na stĺpiky pre nasúvacie stĺpiky 100x50 mm -2 rady vreciek na stĺpiky priečne na husacom krku od vonkajšieho rámu po hlavný rám (1x pred a 1x za pozíciami kráľovského čapu) -3 rady vreciek na stĺpiky priečne na ložnej ploche od vonkajšieho rámu po hlavný rám (1x pred výsuvom, 1x za výsuvom a 1x za 3. nápravou) -2 páry oceľových platní v ložnej ploche na uzamknutie kontajnerov na umiestnenie 1x 20ft kontajnera

Stav: nový, maximálna hmotnosť nákladu: 45 250 kg, celková hmotnosť: 58 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 550 mm, Výbava: ABS, Our complete inventory of immediately and short-term available vehicles can be found on our website. Excerpt from the equipment list. Full equipment details available on request. Chassis, cranked: * Special steel frame made of high-strength fine-grained steels, electrically welded at the joints * Well-dimensioned outer frame, 4-axle configuration * Wheel covers above the axles with spray suppression * All steel parts sandblasted * Side underrun protection made of anodized aluminum installed * Increased point load approx. 30,000 kg over approx. 4,000 mm * Special design in the cranked section for maximum low-bed length in combination with AluLeg drop supports instead of telescopic support winches, maximum rear swing radius of the tractor unit approx. 2,100 mm Special body with rear stake widening: * DINKEL special body * Self-supporting aluminum roof rail/profile approx. 120 x 100 mm, sliding roof with plastic flaps * Rear stakes can be widened for loading and unloading to approx. 4,200 mm * Three sliding stakes per side with rubber tension compensation * Additional center stake lockings in the roof rail and park position, operated by pull cable and spring bolt * DINKEL mechanical height-adjustable lifting roof * Lifting roof height approx. 400 mm, operable from both or one side without opening the opposite side * Additional height adjustment of approx. 480 mm in approx. 40 mm increments via stake adjustment * Front overlap at the bulkhead for driving under tarpaulin up to a total height of approx. 4,400 mm * Four rows of stackable approx. 150 mm aluminum slats on the sides, lower pockets for 450 mm slats, above four rows of single pockets. In the high-bed area only three rows of insertable slats, spacing evenly distributed Floor: * Approx. 27 mm special water-resistant glued beech plywood anti-slip boards, rough surface * Steel sheet in the wheel area. Forklift-trafficable according to DIN standard Hsdpfx Aswx Dbisnrel * Outer frame with flush surface Brakes: * WABCO air brake system with EBS according to EU standard 71/320 EEC incl. PREV (parking release safety valve) * Spring-loaded brake cylinders as parking brake * Wabco Smart Board with odometer and axle load indicator * Including WABCO tire pressure monitoring Axles: * 4 x 10,000 kg SAF axles with drum brakes, low-loader design * Air suspension with lift and lower device, total lift approx. 230 mm * Third and fourth axles as friction-steered trailing axles with electric and mechanical lock Twin tyres: * 235/75 R 17.5, 16-ply. Brand of our choice, incl. wheel holder * Without spare wheel Lighting: * As per EU standard including LED side marker lights * Position lamps in LED version * 2 additional reversing lights * 2 working lights on inside front wall, upper Paintwork: * Chassis and body painted in single color RAL 3002 carmine red * Center stakes and axles KTL coated in black * Corner stakes galvanized * Plastic parts black * Galvanized parts unpainted * Rims factory silver Special equipment included: * 15-pin electrical supply line * Air suspension in ECAS version, operated on the trailer * Oversize marking signs for front and rear made of galvanized, infinitely extendable design with installed marker lights including sockets for rotating beacons (small plates) * Additional unlocking for sliding roof frame from outside * 4 stake adapters for special outer frame profile, for arbitrarily locking the center stakes * PVC sliding tarpaulins, color similar to RAL 9006 silver, oversize and...

Stav: použitý, maximálna hmotnosť nákladu: 44 980 kg, celková hmotnosť: 58 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 09/2024, ďalšia kontrola (TÜV): 09/2025, celková šírka: 2 550 mm, Výbava: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Complete specification available on request. Chassis, cranked * Special steel frame made of high-strength fine-grained steels, electrically welded at the joints, well-dimensioned outer frame * 4-axle configuration. Wheel covers over the axles with spray suppression system * All steel parts sandblasted * Side underrun protection made of anodized aluminum mounted * Increased point load approx. 30,000 kg over approx. 4,000 mm * Special construction in the cranked area for maximum low-bed length in combination with AluLeg drop-down supports instead of telescopic support winches; max. rear swing radius of the tractor unit approx. 2,100 mm Special superstructure with rear stake widening * Self-supporting aluminum roof beam / profile approx. 120 x 100 mm, sliding roof with plastic panels * Rear stakes extendable to approx. 4,200 mm * Three sliding stakes per side with rubber tension unloading * Additional center stake lockings in the roof beam and parking position, with pull cable and spring latch * Lifting roof mechanically height-adjustable, stroke roof height approx. 400 mm, operable on both sides or one side only, without opening the opposite side or doors * Additional height adjustment of approx. 480 mm in approx. 40 mm increments, with height adjustment in the stakes * Front overlap on front wall for driving under tarp up to a total height of approx. 4,400 mm * Four rows of stackable approx. 150 mm aluminum slats on the sides, lower 450 pockets, above 4 rows of individual pockets * In the high bed only 3 rows of insert slats. Spacing uniformly distributed Floor * Approx. 27 mm special waterproof-bonded beech plywood, rough surface * Steel plate in the wheel housing area * Forklift accessible according to DIN standard (please specify exact standard if known) * Outer frame with flush surface Brakes * WABCO air brake system with EBS according to EC regulation 71/320 EEC incl. PREV (parking release safety valve) * Spring-loaded brake cylinder as parking brake * Wabco Smart Board with odometer and axle load display Axles Hjdpfx Anelthguersl * 4 x 10,000 kg SAF/Sauer with drum brakes designed for low-loader use * Air suspension with lifting and lowering function, total travel approx. 230 mm * Third and fourth axles are friction-steered trailing axles with electric and mechanical locking Twin tires * 235/75 R 17.5, 16-ply, incl. spare wheel holder; spare wheel not included Painting * Chassis in RAL 3002 red, single color * Center stakes, axles KTL coated black * Corner stakes hot-dip galvanized * Plastic parts black * Hot-dip galvanized parts unpainted * Wheels in factory silver * Body in RAL color, single color Special equipment included * Air suspension in ECAS version, control on the trailer * Oversize signage front and rear in galvanized, steplessly telescopic version with warning lights including sockets for rotating beacons (small signs) * Additional exterior unlocking for sliding roof frame * 4 stake adapters for special outer frame profile, for optional locking of the center stakes * PVC sliding tarpaulins, color similar to RAL 9006 silver * Translucent roof tarpaulin, for oversize/overheight, flat hooks, tarp folds, locks with pawl/OCS * Rear left telescopic socket for rotating beacon incl. beacon * Outer frame for machine transport with approx. 64 lashing points for 2,000 kg, 3,000 kg, and 10,000

Stav: nový, maximálna hmotnosť nákladu: 23 920 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, NOVÉ VOZIDLO Fliegl 3-nápravový nízkoložný náves Typ DTS 300, žiarovo zinkovaný Celková hmotnosť: 24.000 kg / 30.000 kg Užitočné zaťaženie: 17.920 kg / 23.920 kg Pohotovostná hmotnosť: 6.080 kg Celková dĺžka: 10.900 mm Dĺžka ložnej plochy: 8.680 mm Ložná plocha: 6.500 mm vrátane 900 mm nájazdového sklonu Hjdoxb Nmyjpfx Anrsl Parabolické listové pruženie Dlhé rampy 2.800 mm s hydraulickým ovládaním Rozšírenie na 3.000 mm s výstražnými tabuľami a majákom Kompletný balík upevňovacích bodov (5,0 a 10,0 ton) 5 párov vreciek na stĺpiky Ťažné oko 40 mm Príplatok za dopravu/pripravenie zo skladu Wiesmoor 1.280,00 € bez DPH Leasingová ponuka: doba 48 mesiacov, zostatková hodnota 40 %, akontácia len DPH. Mesačná splátka: 500,00 EUR

Stav: použitý, maximálna hmotnosť nákladu: 28 520 kg, celková hmotnosť: 36 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 09/2014, dĺžka ložného priestoru: 13 470 mm, šírka ložného priestoru: 2 490 mm, výška ložného priestoru: 2 850 mm, Výbava: ABS, Legras SBS 2220 Prvá registrácia 9/2014 95 m³ 1. a 3. náprava zdvíhateľná SAF nápravy Nakladacia plocha 13.470 x 2.490 x 2.850 mm Rázvor 1.310 mm Plachta Kotúčové brzdy ABS Hsdpfxsy H T Dco Anrol Pneumatiky 385/65 R22.5 - hĺbka dezénu cca 7 mm Prevádzková hmotnosť 7.480 kg Celková hmotnosť 36.000 kg V dobrom stave

Stav: použitý, pohotovostná hmotnosť: 6 203 kg, maximálna hmotnosť nákladu: 14 797 kg, celková hmotnosť: 23 000 kg, konfigurácia náprav: 1 náprava, prvá registrácia: 05/2024, ďalšia kontrola (TÜV): 05/2026, zavesenie: vzduch, Výbava: ABS, | Krone SEK DryLiner 1-nápravový skriňový náves | Bočné upevňovacie body a pásová lišta | Dvojpodlažný bez nosníkov - nosníky na vyžiadanie k dispozícii | Portálové dvere | Držiak rezervného kolesa | Podperný navijak pre nakladanie vysokozdvižným vozíkom | Kotviace lišty na bočných stenách | Platná kontrolná správa do 05/2026 | Zmena, chyby v zadaní a predaj vyhradený. Hjdpfxsym Rd Ss Anrol

Stav: použitý, pohotovostná hmotnosť: 6 692 kg, maximálna hmotnosť nákladu: 29 308 kg, celková hmotnosť: 36 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 06/2022, ďalšia kontrola (TÜV): 06/2026, zavesenie: vzduch, veľkosť pneumatiky: 385/65 22.5, Výbava: ABS, registrácia nákladného vozidla, | Schmitz SCB S3T, box na palety | Zdvíhacia strecha, Edscha posuvné plachtové prekrytie | Pneumatiky 385/65 R22.5 | 1. náprava zdvíhacia | Rám s otvormi na zaistenie nákladu | Skrinka na náradie | Držiak rezervného kolesa | Nápravy Schmitz s kotúčovými brzdami | Dobrý stav | Rakúske vozidlo | Platná technická kontrola/TÜV do 06/2026 | Varios 2,70-2,90m. Chyby, zmeny a predbežný predaj vyhradené. Hedjy D Htlspfx Anrol

Stav: použitý, pohotovostná hmotnosť: 6 692 kg, maximálna hmotnosť nákladu: 29 308 kg, celková hmotnosť: 36 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 06/2022, ďalšia kontrola (TÜV): 06/2026, zavesenie: vzduch, veľkosť pneumatiky: 385/65 22.5, Výbava: ABS, registrácia nákladného vozidla, | Schmitz SCB S3T, box na palety | Zdvíhacia strecha, Edscha posuvné plachtové prekrytie | Pneumatiky 385/65 R22.5 | 1. náprava zdvíhacia | Rám s otvormi na zaistenie nákladu | Skrinka na náradie | Držiak rezervného kolesa | Nápravy Schmitz s kotúčovými brzdami | Dobrý stav | Rakúske vozidlo | Platná technická kontrola/TÜV do 06/2026 | Varios 2,70-2,90m. Chyby, zmeny a predbežný predaj vyhradené. Hodpfx Ajy Dt Uvonrjl

Stav: použitý, pohotovostná hmotnosť: 2 900 kg, maximálna hmotnosť nákladu: 7 600 kg, celková hmotnosť: 10 500 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 01/2022, dĺžka ložného priestoru: 5 040 mm, šírka ložného priestoru: 2 420 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75R17,5 140J, rázvor náprav: 990 mm, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235/75R17,5 140J, veľkosť zadnej pneumatiky: 235/75R17,5 140J, kabína vodiča: iný, emisná trieda: žiadny, Výbava: ABS, pneumatická brzda, 10 x upevňovacie oká, príplatok za rampy: 800 € , Vozidlo je predávané a ponúkané na objednávku, -- Tlačové chyby, omyly a zmeny vyhradené, ilustračné obrázky --, Viac údajov na: !, Viac detailov: ! Hjdpoy Igvbefx Anrjl