Müller-Mitteltal Pt 40 Sonderpreis, Tieflader Mit Hydr. Rampen kúpiť použité (19 716)

Stav: nový, maximálna hmotnosť nákladu: 16 500 kg, celková hmotnosť: 21 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, Výbava: ABS, zdvíhacie čelo, Müller-Mitteltal ETÜ-TAR 21 Tandem - Low Loader | Drive-Over Flatbed Trailer Ref. No. for enquiries: 11630 – Vehicle available immediately ex-stock Alsdorf NEW VEHICLE incl. COC * Gross weight: 21t, Payload: 16.50t, galvanized chassis * Flatbed version with 400mm high front wall, ramp safety via ramp support bar and diagonal bracing * 21t version with reinforced frame and axles, axle spacing 1,810 mm * Deck height approx. 910 mm loaded / approx. 940 mm unloaded * 7m loading area with 400 mm high front wall * Extended ramps: 3m, hot-dip galvanized one-piece ramps with galvanized grating Dujdpfx Aoyvxg Usm Sst * Ramp lift with vertically mounted, adjustable springs for easy single-person operation * Load securing package: – 4 x UVV drop lashing brackets (LC 8,000 daN) mounted to existing hole pattern in the 45° outer frame, positioned approx. 1m from front/rear cross-member – 10 x UVV retractable lashing brackets LC 3,000 daN in existing hole matrix in the outer frame – 2 x UVV lashing rings each recessed at the front and rear in the cross-member, LC 10,000 daN – Further lashing options through holes (Ø 50 mm, LC 1,200 daN) in the front and rear cross-member * Prepared for retrofitting container locks (container locks available and offered at extra charge) * 50mm thick softwood floor * Gigant air suspension axles incl. EBS 2S/2M, lifting and lowering * 235/75R 17.5 (8 units) dual tires with tire pressure monitoring sensor * Plastic toolbox mounted in front of the front panel, right in direction of travel * LED lighting system * 7-pin socket at the rear, connects to overlength lighting with rear light (58R) and ground * 2 LED reversing lights at the rear * Flashing side marker lights * Oversize warning panel * 1 removable LED beacon incl. mounting bracket and installation * Foldable rear supports, front support leg with gear winch --- Sample hire purchase offer from our partner MMV Leasing: €665/month net for 60 months with no down payment and zero residual value Other terms with/without down payment / residual values possible! We are a Müller-Mitteltal trading partner --- Our opening times * Monday – Thursday: 08:00 – 17:00 * Friday: 08:00 – 15:00 * Outside these hours, we are available by appointment * we speak German, English, Russian, Polish, French * WhatsApp

Stav: použitý, maximálna hmotnosť nákladu: 8 650 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 07/2017, ďalšia kontrola (TÜV): 05/2026, dĺžka ložného priestoru: 6 250 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 900 mm, celková šírka: 2 550 mm, Ďalšie informácie 400 mm sklápateľné bočné steny - Pružinový zdvihák bočnice - Nasadzovacia zadná stena - Veľký upínací balík - Dierovaná lišta na ložnej ploche - Predná oporná noha výškovo nastaviteľná - Zadné oporné nohy sklápateľné - Plastová náradová skrinka Dedpfx Asy Hn D Rsm Ssut - BPW nápravy - Pružinové rampy s mriežkou

Stav: použitý, konfigurácia náprav: 2 nápravy, prvá registrácia: 09/1993, Rok výroby: 1993, Výbava: ABS, = Ďalšie možnosti a príslušenstvo = - EBS = Ďalšie informácie = Hrubá hmotnosť: 4.600 kg Užitočné zaťaženie: 13.400 kg CELKOVÁ HMOTNOSŤ: 18.000 kg Dujdoxt Rw Repfx Am Sst Predajná cena: € 6.500, US$ 7.658

Stav: použitý, konfigurácia náprav: 3 nápravy, zavesenie: parabolický list (pružina), veľkosť pneumatiky: 235-75R17.5, Rok výroby: 2008, GOWORIM PO RUSSKI - Yuriy mob.: 4-nápravový nízkozdvižný príves, prejazdný. Povolená celková hmotnosť 40 000 kg, užitočná hmotnosť 31 820 kg. Nakladacia plocha cca 9 800 mm (2 400+7 400 mm) x 2 550 mm, sklopné rozšírenia na 3 000 mm, výstražný balík pre nadmernú šírku, výstražné majáky, odkladacia plocha pre rameno bagra, výška nakladania cca 900 mm. 12 upevňovacích ôk, 12 kotviacich strmeňov v vonkajšom ráme. Hydraulické rampy cca 3 000 x 650 mm. Nápravy SAF, EBS, parabolické pruženie s vyrovnávacou jednotkou, pneumatiky 235-75R17.5. Náradie v skrinke. Zadné hydraulické podpery. Ťažné očko 50 mm. 2-okruhová hydraulika, 2-okruhové vzduchové vedenie (Duomatik), 24 voltov. Lakovanie žlté. Predaj v aktuálnom stave. = Ďalšie informácie = Dusdjuuxg Nspfx Am Sst Rozmer pneumatík: 235-75R17.5 Pruženie: parabolické pružiny Služobná hmotnosť: 8 180 kg Užitočná hmotnosť: 31 820 kg Celková povolená hmotnosť: 40 000 kg Krajina výroby: DE Kontaktujte Jana-Marca Schwickerta pre viac informácií.

Stav: nový, maximálna hmotnosť nákladu: 38 620 kg, celková hmotnosť: 50 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, T5 Profile 50.0: ----Brake: * Wabco EBS (electronic braking system) * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (when lifted, ride height +30 mm) * Last axle is self-steering (lockable from the cab for maneuvering purposes without truck-side installation, as well as via a switch on the trailer); lock must be disengaged before driving on public roads * Forced lifting and lowering of the lift axle for maneuvering (truck-side installation required) with speed-dependent control via EBS electronics ----Suspension: * Air suspension with lift and lowering function, with RtR valve ----Drawbar: * Drawbar, 1,500 mm long, with 50 mm draw eye and manual height adjustment ----Electrics / Lighting: * Smartboard infotool with pressure sensors for total axle load display per axle group * Tire pressure monitoring with display option in the truck via EBS signal (without truck-side installation) * LED lighting system 12/24 V * LED beacon (removable) at rear ----General Attachments: * Mechanical warning sign kit for 3 m width * Toolbox made of galvanized steel approx. 650 x 300 x 600 mm, mounted on the left side * Plastic mudguards front axle and galvanized steel mudguard skirts rear axle ----Low Loader Platform: * Front section of bogie platform with 45° corners and 3 storage compartments with lockable folding lids (folding rearward) * Reduction of low loader platform by 500 mm to 6,280 mm including extension of offset cranking by 500 mm forward * Rubber covering on the folding frame, drive-on slope and running surface of the low loader platform * Bamboo wood between the longitudinal beams in front of the excavator stick recess ----Load Securing (LaSi Package): * 2 x 6.4 t lashing eyes at the front corners * 2 x 13.4 t UVV lashing points on each front and rear side corner * 5 x 10 t UVV lashing rings per side (swiveling, lowerable, loadable in all directions) * 4 stake pockets per side, each with a 2 t lashing option * 1 x 16 t UVV lashing ring on the rear cross member ----Extension: * Extending and folding extension beams for 3 m total width (timber carrier under the chassis on the right side) ----Excavator Stick Rest: * Continuous excavator stick rest with reinforcement profile from the last axle to the end cross member, approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides of the rest ----Ramps: * Hydraulic folding ramp with dual-circuit hydraulics and deployable tip section, approx. 4,650 x 720 mm, incl. load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump capacities from the truck of over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded 890 mm +/- 20 mm via air suspension ----Loading Platform Dimensions: * Platform above slewing ring: 2,600 + 390 x 2,520 mm * Low-bed platform: 6,280 + 500 x 2,520 mm, incl. 860 mm drive-on slope ----Painting: * Chassis, bogie, drawbar, extension consoles, and ramps hot-dip galvanized * Drawbar, axles, hydraulic axle supports, and air tanks painted in a shade of black ----Information: * New vehicle with manufacturer's warranty Dedpfx Amexptn Ds Ssut * Subject to errors and prior sale ----Delivery Time: * Available immediately*

Stav: nový, maximálna hmotnosť nákladu: 38 620 kg, celková hmotnosť: 50 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, T5 Profile 50.0: ----Brakes: Dodpfsl Tihujx Am Seut * Wabco EBS (electronic brake system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (ride height +30 mm when lifted) * Last axle self-steering (lockable from the driver's cab for maneuvering without truck-side installation, and additionally via a switch on the trailer); lock must be disengaged before driving on public roads * Forced unloading and forced lowering of the lift axle for maneuvering purposes (truck-side installation required) with speed-dependent control via EBS electronics ----Suspension: * Air suspension, lifting and lowering unit with RtR valve ----Drawbar: * Drawbar 1,500 mm long with 50 mm draw eye and manual height adjustment ----Electrics / Lighting: * Smartboard as an info tool with pressure sensors for total axle load display per axle group * Tire pressure monitoring with display in the truck via EBS signal (without truck-side installation) * LED lighting system 12 / 24 V * Removable rear LED beacon ----General attachments: * Mechanical warning panel package for 3 m total width * Toolbox made from galvanized steel sheet, approx. 650 x 300 x 600 mm, left side * Front axle plastic mudguards and rear axle galvanized steel mud flaps ----Low-loader deck: * Front section of turntable platform with 45° corners and 3 storage compartments with lockable fold-up lids (lids open to the rear) * Shortening of low-loader platform by 500 mm to 6,280 mm including extended step recess by 500 mm to the front * Rubber coating on the fold-down frame, approach ramp and on the running surface of the low-loader platform * Between the longitudinal beams in front of the excavator arm rest: bamboo wood ----Load restraint (LaSi package): * 2 x 6.4 t lashing rings at the front corners * 2 x 13.4 t UVV lashing rings at the front and rear side corners, per side * 5 x 10 t UVV lashing rings per side (swivel-mounted, height-adjustable, loadable in all directions) * 4 stake pockets per side, each with 2 t lashing capacity * 1 x 16 t UVV lashing ring on the rear traverse ----Widening: * Telescopic and foldable extension beams for 3 m overall width (plank holder under the chassis, right side) ----Excavator stick rest: * Continuous excavator stick rest with reinforcement profile from last axle to rear cross member, approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides of the rest ----Ramps: * Hydraulic folding ramp with dual-line hydraulics and extendable tip, approx. 4,650 x 720 mm including load-holding valves and hydraulic lateral adjustment ----Rear support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump output in the truck above 40 l/min up to max. 140 l/min) ----Loading height: * Loaded: 890 mm +/- 20 mm via air suspension ----Loading area dimensions: * Platform above turntable: 2,600 + 390 x 2,520 mm * Low-bed deck: 6,280 + 500 x 2,520 mm, including 860 mm approach ramp ----Paintwork: * Chassis, turntable, drawbar, extension consoles, access ramps hot-dip galvanized * Drawbar fork, axles, hydraulic axle supports and air tanks painted in black ----Info: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Immediately available*

Stav: nový, maximálna hmotnosť nákladu: 8 770 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, Výbava: ABS, zdvíhacie čelo, * Müller-Mitteltal ETÜ-TA-R 11.9 Low Loader Tandem Trailer with Ramps * BRAND NEW vehicle, no initial registration * Available mid/end of May '26 in RAL 7016 Anthracite Reference for inquiries: 30504 * GVW: 11.9 t, Payload: 8.77 t * Reinforced and certified body according to EN 12642 XL incl. load securing certificate * 6.27 m x 2.47 m x 0.4 m laser-welded drop sides made of steel, foldable with 2 torsion springs * Bolted front wall made of smooth sheet (hot-dip galvanized) * Rear wall: (hot-dip galvanized) inserted in front of the ramps with a storage mount behind the front wall * Bolted rear stanchions (hot-dip galvanized) * Softwood floor, 50 mm thick. * 4 UVV lashing rings LC 6300 daN recessed front and rear in the cross member * 10 UVV lashing brackets LC 3000 daN recessed in the existing hole pattern in the outer frame * Ramps: one-piece with hot-dip galvanized anti-slip grating * Mounting points for retrofitting container locks in front of the front wall * Plastic toolbox in front of the bulkhead * Chassis and drawbar (hot-dip galvanized) * 235/75 R17.5 (twin tires), parabolic suspension * BPW axles with tire pressure monitoring system * EBS 24 Volt Dsdpfx Ameyxbdbe Seut * Height-adjustable drawbar (hot-dip galvanized) with 40 mm towing eye * 2 LED reversing lights at the rear of the trailer * LED lighting system for 12+24 Volt * Side marker lights with indicator activation * 1 removable LED rotating beacon (warning light) incl. bracket and installation ---- * Trade-in possible * Financing available via our partner banks with or without down payment / residual value and various terms. Request a quote from us! ---- * Example lease-to-own option from our partner FM LeasingPartner: €475/month net, 60-month term, no down payment and “0” Euro residual. Other terms with or without down payment/residual value available. Request a quote from us! We are an authorized Müller-Mitteltal dealer! ---- * Our opening hours: * Monday - Thursday: 08:00 - 17:00 * Friday: 08:00 - 15:00 * Outside business hours by appointment * Wir sprechen Deutsch, we speak English, ????? ?? ????? ?????, mowimy po polsku, on parle francais

Stav: použitý, pohotovostná hmotnosť: 3 210 kg, maximálna hmotnosť nákladu: 8 690 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 05/2021, ďalšia kontrola (TÜV): 06/2026, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 430 mm, výška ložného priestoru: 500 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75 R17.5, Rok výroby: 2021, Výbava: ABS, Nemecké vozidlo MASTERLINE Müller-Mitteltal KA-TA-R 11,9 trojstranný sklápací náves s podskrutkovanými rampami Rok výroby: 05/2021 pozinkovaný Celková hmotnosť: 11 900 kg Prevádzková hmotnosť: 3 210 kg Užitočné zaťaženie: 8 690 kg Rozmer pneumatík: 235/75 R 17,5 tandemová náprava menej ako 1 m Ťažné zariadenie plynulo výškovo nastaviteľné, žiarovo pozinkované, ťažné oko 40 mm Rám pozinkovaný Nápravy BPW Výška podlahy: 0,93 m Možnosť ďalších služieb! Exportné značky (červené / 30 dní) Nemecko Prevozné značky (žlté / 5 dní) Nemecko Rakúske prevozné značky je možné sprostredkovať Dovoz vozidla (za poplatok) Duodpfx Amsyxbgce Sjt Údaje z internetu sú nezáväznými popismi. Nepredstavujú garantované vlastnosti. Predajca nezodpovedá za chyby, preklepy a chyby pri prenose dát. Predaj s výhradou medzipredaja. Predaj len podnikateľom. Platné sú výhradne naše VOP.

Stav: použitý, pohotovostná hmotnosť: 3 210 kg, maximálna hmotnosť nákladu: 8 690 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 05/2021, ďalšia kontrola (TÜV): 06/2026, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 430 mm, výška ložného priestoru: 500 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75 R17.5, Rok výroby: 2021, Výbava: ABS, Nemecké vozidlo MASTERLINE Müller-Mitteltal KA-TA-R 11,9 trojstranný sklápací náves s podskrutkovanými rampami Rok výroby: 05/2021 pozinkovaný Celková hmotnosť: 11 900 kg Prevádzková hmotnosť: 3 210 kg Užitočné zaťaženie: 8 690 kg Rozmer pneumatík: 235/75 R 17,5 Dsdeyw N Npepfx Am Seut tandemová náprava menej ako 1 m Ťažné zariadenie plynulo výškovo nastaviteľné, žiarovo pozinkované, ťažné oko 40 mm Rám pozinkovaný Nápravy BPW Výška podlahy: 0,93 m Možnosť ďalších služieb! Exportné značky (červené / 30 dní) Nemecko Prevozné značky (žlté / 5 dní) Nemecko Rakúske prevozné značky je možné sprostredkovať Dovoz vozidla (za poplatok) Údaje z internetu sú nezáväznými popismi. Nepredstavujú garantované vlastnosti. Predajca nezodpovedá za chyby, preklepy a chyby pri prenose dát. Predaj s výhradou medzipredaja. Predaj len podnikateľom. Platné sú výhradne naše VOP.

Stav: nový, maximálna hmotnosť nákladu: 30 740 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lifting and lowering system and RtR valve * Smard-Board for payload determination * Warning sign kits front & rear * Reflective contour markings on the sides and rear * Removable rear rotating beacon Dsdpfxsl Tik Nj Am Sout * LED lighting * Straight drawbar with 50 mm towing eye and stepless height adjustment * Toolbox made of powder-coated sheet steel and basket-type spare wheel holder, right side * Front: closed single plastic mudguards * Rear: straight steel mud flaps with spray suppression * Side underrun protection * Turntable platform extended by 520 mm with 45° corners and 3 recessed lockable storage compartments including lids * Chassis made of high-strength fine-grain steel * Decking over turntable platform: 50 mm softwood, and on low-bed platform: 60 mm softwood * Outer planks of the loading ramps made of hardwood * Four stake pockets on each side (stakes not included) with simultaneous 2 t lashing option * Lashing package: two 6.4 t lashing eyes front left and right on the main frame of the turntable platform * On the outer frame, two pairs front and rear of 13.4 t lashing rings each, and four pairs per side of 10 t swivel and lowerable lashing rings * Loadable in all directions and integrated in the outer frame * Two pairs of 6.4 t lashing rings on the excavator arm rest, side * 8 pairs of galvanized folding outriggers for 3 m total width (not on rear slope) * Widening planks stored on the left side in a storage compartment * Excavator arm rest above the rear axle to the end of the loading slope approx. 2,100 x 740 x 190 mm * Mechanical drop supports at the rear * Hydraulic folding ramps with hydraulically extendable tip, approx. 4,650 x 720 mm, incl. hydraulic lateral ramp adjustment & load holding valve * Loading area above turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loading height, loaded: approx. 890 mm, +/- 20 mm (incl. 860 mm loading slope) * Flow divider installed * Chassis, turntable, loading ramps, folding outriggers, and mechanical drop supports hot-dip galvanized * Axles, drawbar, air tank, and turntable painted in black * Tires: 235/75 R 17.5 * New vehicle without previous registration with manufacturer's warranty * Subject to errors and prior sale * Immediately available from Egestorf near the A7

Stav: nový, maximálna hmotnosť nákladu: 30 740 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift and lowering device and RtR valve * Smard board for load weight determination * Warning sign packages front and rear * Side and rear reflective contour tape * Removable rear revolving beacon * LED lighting * Straight drawbar with 50 mm towing eye and infinitely variable height adjustment * Toolbox made of powder-coated sheet steel and spare wheel holder in basket design on the right side * Front closed single plastic fenders Djdsl Tphrspfx Am Sjut * Rear straight steel mud guards, each with spray protection (spray mist reduction) * Side anti-collision guard * Extension of the turntable platform by 520 mm with 45° corners and 3 recessed storage compartments incl. lids, lockable * Chassis made of high-strength fine-grained steel * Floor above the turntable platform made of 50 mm and in lowbed platform of 60 mm softwood * Outer planks of the access ramps made of hardwood * Each side with 4 stake pockets (with simultaneous 2 t lashing possibility, no stakes included) * Lashing package: 2 lashing eyes 6.4 t at the front left and right on the main frame of the turntable platform * On the outside frame: each side front and rear 2 pairs of 13.4 t lashing rings, plus each side 4 pairs of 10 t swinging and lowering lashing rings * Loadable from all directions and recessed into the outside frame * 2 pairs of lashing rings 6.4 t on the side in excavator arm holder * 8 pairs of galvanized fold-out outriggers for 3 m overall width (however, not on the tail slope) * Side extension planks stored in a compartment on the left * Excavator arm holder above the rear axle up to the end of the access slope approx. 2,100 x 740 x 190 mm * Mechanical rear support legs * Hydraulic folding ramps with hydraulically extendable tip section approx. 4,650 x 720 mm incl. hydraulic side ramp displacement & load-holding valve * Loading area above the turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loading height loaded approx. 890 mm, +/- 20 mm (including approx. 860 mm access slope) * Flow divider installed * Chassis, turntable, ramps, fold-out outriggers, and mechanical rear supports hot-dip galvanized * Axles, drawbar, air tanks, and turntable painted in black * Tires 235/75 R 17.5 * New vehicle, no prior registration, with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf on the A7

Stav: nový, maximálna hmotnosť nákladu: 11 050 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2026, Výbava: ABS, zdvíhacie čelo, * Müller-Mitteltal KA-TA-R 14.4 Tandem Low Loader Three-Way Tipping Trailer with Ramps * NEW VEHICLE * Available mid-May 2026 in RAL 9016 traffic white * Leasing, financing, and trade-in of your old trailer possible ---- * Reference number for inquiries: 30505 ---- * RDÜ with display capability in the truck via EBS signal * Side marker lights with indicator control * GVW: 14,400 kg, Payload: 11,050 kg * EBS 2S/2M * Galvanized floor, 5m x 2.42m, 0.5m laser-welded drop sides, pendulum function, foldable and removable, prepped for later installation of side extension boards * Lockable compartment under the tipping platform for ramps * Includes 1 pair of aluminum loading ramps, 8t/pair, 3.57m * Chassis galvanized, front wall galvanized * 4 UVV tie-down rings LC 5000daN front and rear, plus 8 recessed and foldable lashing eyes LC 3000daN set in the tipper floor (centered) * Hardwood excavator bucket rest * Two-step access in front of front wall (galvanized) * Drawbar infinitely height-adjustable, galvanized, 40mm towing eye * Wide tyres 385/55R 19.5 (4 off), parabolic springs * Net hooks, rear stanchions bolted, galvanized * Guide cables for the rear drop side * Plastic toolbox on the right chassis frame Duedoyvxg Ispfx Am Sjt * LED lighting system 12 + 24 volt * 2 LED reversing lights at the rear of the trailer ---- * Hire-purchase price: * e.g., €549 for 60 months without down payment and without residual value. An offer from our financing partner "FM LeasingPartner." Other terms with/without residual value or down payment available. * Request a quote from us! * We are an official Müller-Mitteltal dealer * On-time orders can be delivered free to your door! ----Our opening hours: Monday - Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 Outside these hours, appointments by arrangement. We speak German, English, Polish, and French. WhatsApp

Stav: nový, maximálna hmotnosť nákladu: 13 490 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2025, TRA-Kombi 18.0: 3 in 1 = for roll-off containers, skip containers, and as a low loader ----Brakes: * EBS-E (Electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10.5 t axles ----Suspension: * Air suspension with manual lowering at the rear ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment device ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System), display possible in truck via EBS signal (no truck-side installation required) * LED tail lights 12 / 24 V * 15-pin power connector ----General Accessories: * Tool box made of powder-coated sheet steel * Spare wheel holder, basket design, mounted on the right side * Enclosed side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear impact protection buffers * Foldable A-sign at the rear Dusdpfsl Tld Iex Am Set ----Loading Area: * Hot-dip galvanized main frame with raised outer frame for guiding roll containers * Steel sheet floor with roller recesses in the bogie area * For roll-off containers, container lengths from 5,500 to 7,000 mm possible * Pneumatic 4-way clamp locking as well as mechanically pluggable stop brackets at the front in the running rail * Transport of up to 2 skip containers with max. 10 m³ volume possible * Including 8 relocatable container stops for lateral centering, the front 4 equipped with pivotable stop * Weld bead as anti-slip coating in the running rail area of the ramp incline * Mechanical drop-down supports at the rear ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning devices for positive and non-positive securing of the containers, 4 lashing bars in cloverleaf design per side * 1 pair of 13.4 t UVV lashing rings at the front * 4 x 8 t lashing lugs per side recessed into the outer frame ----Ramps: * Aluminium approach ramps (10.6 t / pair) 2,800 x 470 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment accessible from the rear) ----Paintwork: * Reflective contour marking strips on sides & rear * Frame hot-dip galvanized * Axles and drawbar painted black ----Info: * Load securing certificate according to DIN 30722-1 * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * -- Permissible total weight of 20,000 kg technically possible -- * New vehicle without initial registration, with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available from Egstorf

Stav: nový, maximálna hmotnosť nákladu: 13 490 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2025, TRA-Kombi 18.0: * 3 in 1 = for roll-off containers, skip containers, and as a low-loader trailer ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring brake cylinder * Drum brakes ----Axles: * 2 x 10.5 t axles ----Suspension: * Air suspension with manual rear lowering ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment device ----Electrics / Lighting: * TPMS (Tyre Pressure Monitoring System), display possible in truck via EBS signal (no installation needed on truck) * LED rear lights 12 / 24 V * 15-pin power connector ----General attachments: * Powder-coated steel toolbox Djdpfxjwb Raks Am Ssut * Basket-type spare wheel holder on the right-hand side * Enclosed side underrun protection * Plastic quarter mudguards with splash guards * Rear plastic bumper buffer * Foldable rear A-panel ----Loading platform: * Hot-dip galvanized main frame with raised outer frame for guiding roll containers * Steel floor with roller recesses in the bogie area * For roll-off container transport: container length from 5,500 to 7,000 mm possible * Pneumatic 4-point clamping lock and mechanically insertable stopper brackets at the front in the rail * Transport of up to 2 skip containers with a maximum of 10 m³ volume possible * 8 removable skip stops for lateral centering, the front 4 stops inserted with pivotable contact * Weld bead as anti-slip surface in the running area of the ramps * Mechanical drop-down supports at the rear ----Load securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching lashing elements for form-fit and friction-lock securing of the skips, with 4 cloverleaf-design lashing bars (side) * 1 pair of 13.4 t UVV lashing rings in the front * 4 x 8 t lashing eyes recessed per side in the outer frame ----Ramps: * Aluminium approach ramps (10.6 t/pair), 2,800 x 470 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment at rear) ----Paintwork: * Reflective contour tape on the sides & rear * Frame hot-dip galvanized * Axles and drawbar painted black ----Info: * Load securing certificate according to DIN 30722-1 * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * -- Permissible total weight of 20,000 kg technically possible -- * New vehicle without first registration, with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Immediately available from Egstorf

Stav: nový, maximálna hmotnosť nákladu: 13 490 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2025, TRA Combination 18.0: 3 in 1 = for roll-off containers, skip containers, and as a low loader ----Brakes: * EBS-E (electronic braking system) * Emergency release for spring-loaded cylinders Djdpfol Tnwzox Am Ssut * Drum brakes ----Axles: * 2 x 10.5 ton axles ----Suspension: * Air suspension with manual rear lowering ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm draw eye and height adjustment ----Electrics / Lighting: * TPMS (tire pressure monitoring system), display possible in truck via EBS signal (no truck-side installation required) * LED tail lights 12 / 24 V * 15-pin power connector ----General Attachments: * Toolbox made of powder-coated sheet steel * Spare wheel carrier, basket design, mounted on the right side * Enclosed side underrun protection * Plastic quarter mudguards with spray protection * Rear plastic impact protection buffers * Foldable A-sign at the rear ----Loading Platform: * Hot-dip galvanized main frame with raised outer frame for guiding roll containers * Steel floor with roller recesses in the bogie area * For roll-off container transport, container length from 5,500 - 7,000 mm possible * Pneumatic 4-way clamping lock and mechanical plug-in stop brackets at the front of the guide rail * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Includes 8 repositionable skip stops for lateral centering of the skips, the front 4 stops are plug-in with pendulum stop * Weld bead as anti-slip surface in the ramp area * Mechanical rear support legs ----Load Securing: * 3 pairs of 10-ton UVV lashing rings on the side for attaching tensioning elements to secure skips, 4 lashing brackets in cloverleaf design (per side) * 1 pair of 13.4-ton UVV lashing rings at the front * 4 x 8-ton lashing eyes recessed in the outer frame on each side ----Ramps: * Aluminum drive-on ramps (10.6 ton/pair) 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Paintwork: * Reflective contour tape at sides & rear * Frame hot-dip galvanized * Axles, drawbar painted black ----Information: * Load securing certificate according to DIN 30722-1 * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * --Permissible gross weight technically possible up to 20,000 kg-- * New vehicle without initial registration, comes with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex works Egstorf

Stav: nový, maximálna hmotnosť nákladu: 10 950 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, Výbava: ABS, zdvíhacie čelo, Müller-Mitteltal ETÜ-TA-R 14.4 Tandem | Low Loader | Platform Trailer Immediately available – Reference number for inquiries: 11611 Delivery to your address possible. * We are happy to provide you with an individual offer * ---- * Gross weight: 14.4t, Payload: 10.95t * LED lighting system * GIGANT axles, EBS, twin tires 235/75R 17.5, parabolic springs * Tire pressure monitoring system (TPMS) * 6.27m x 2.47m platform with galvanized 400mm front wall * Excavator bucket rest made of hardwood, bolted to the front wall * Deck height unladen 930mm / laden 870mm * One-piece ramps with hot-dip galvanized grating, anti-slip design, can be pushed together to approx. 20mm, secured with holding rods and diagonal support * Ramp assist – vertical, adjustable springs for easy single-person operation * 4 UVV-drop lashing rings (LC 6300daN) * Perforated side frame (45°-angled, hole pattern for lashing systems, lashing capacity per point LC 2000 daN at a minimum spacing of 480mm. Retrofitting with drop lashing rings LC 3000 daN at approx. 600mm intervals possible) with close-set transverse crossmembers, high-profile front and rear ends, rear drive-on slope, all hot-dip galvanized * 10 UVV lashing rings LC 3000 daN recessed into existing hole pattern in the side frame, additional * Further tie-down options via holes (Ø 50mm, LC 1200 daN) in the front and end crossmembers * Tool box in front of the bulkhead * Side marker lights with indicator control * 50mm thick softwood floor. Chassis hot-dip galvanized * Height-adjustable landing gear at the front, folding supports at the rear * Retrofitting of 2 container locks possible * Drawbar with 40mm towing eye (hot-dip galvanized), height-adjustable, optionally available with 50mm eye * 1 removable LED warning flasher at the rear---- * Leasing, hire purchase, financing, trade-in possible * e.g. €510 for 60 months, without down payment, no residual value * ---- * Our opening times * Monday - Thursday: 08:00 - 17:00 * Friday: 08:00 - 15:00 Dodpfjyndh Hjx Am Ssut Outside business hours we are available by appointment. We speak German, English, Polish, and French. Leasing, financing, and trade-in possible.

Stav: použitý, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 02/2021, ďalšia kontrola (TÜV): 08/2026, dĺžka ložného priestoru: 4 800 mm, šírka ložného priestoru: 2 430 mm, výška ložného priestoru: 500 mm, Výbava: ABS, Müller-Mitteltal nízkozdvižný sklápací príves - Nízkozdvižný príves a dvojstranný sklápací príves v jednom vozidle - Ťažné oko 40 mm - Pneumatická brzdová sústava - Podperné nohy na nakladanie a vykladanie Djdpfx Amjyk Rfko Seut - Nápravy Gigant - Obojstranné pneumatiky: 235/75 R 17,5 - Bubnové brzdy - Pohotovostná hmotnosť: 3.620 kg - Výškovo nastaviteľné oje - Technická kontrola TÜV do: 08.2026 - Kontrola SP do: 02.2026 - Kontrola SP do: - Dĺžka ložnej plochy: 4.800 mm - Šírka ložnej plochy: 2.430 mm - Výška bočnice: 0,5 m Chyby a medzipredaj vyhradené. Interné číslo vozidla: 11349.

Stav: použitý, maximálna hmotnosť nákladu: 12 080 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 06/2024, dĺžka ložného priestoru: 3 900 mm, šírka ložného priestoru: 1 920 mm, výška ložného priestoru: 415 mm, Rok výroby: 2022, Výbava: ABS, * ETM-TA 14.4: ----Braking system: * Wabco ABS braking system * Emergency release device for spring-actuated cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalising assembly Dedpfx Amol Th Eye Ssut ----Drawbar / Flange towing eye: * Height-adjustable drawbar (+/- 150 mm) * 40 mm bolted towing eye ----General attachments: * Jost landing gear at front * Side underrun protection * Folding A-plate at rear ----Electrics / Lighting: * 15-pin electrical plug * Multi-chamber tail lights ----Superstructure: * Fixed steel front and side panels * Removable steel rear panel * Floor made of 50 mm softwood * 1 sliding plate support 750 x 1,000 mm at the front, incl. 2 drop-in skip stops at the front in 2 positions * Rear crossmember for fitting aluminium drive-on ramps, incl. 2 additional rear supports ----Loading edge: * Unladen loading height approx. 710 mm ----Load securing: * 4 repositionable skip stops (fit in 2 positions) for lateral centering of skips * Each side with 1 x (13.5 t) UVV lashing ring for attaching tensioning devices * 2 ratchet tensioners (spindle adjustment) with compensation chain and quick shortener (tensioning force 6,300 kg) ----Tyres: * Tyres: 285/70R19.5 ----Wheelbase: * Wheelbase: 1,140 mm ----Painting: * Chassis, front panel, side panels, mudguards, drawbar, rear supports hot-dip galvanized * The axles, springs, landing gear, and air tanks painted in black ----General information: * Vehicle registered for one day 06/2024, not loaded/used due to missing tyre pressure monitoring system * Errors and prior sale reserved ----Delivery time: * Available immediately from Egestorf, A7

Stav: použitý, maximálna hmotnosť nákladu: 12 080 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 06/2024, dĺžka ložného priestoru: 3 900 mm, šírka ložného priestoru: 1 920 mm, výška ložného priestoru: 415 mm, Rok výroby: 2022, Výbava: ABS, * ETM-TA 14.4: ----Brzdy: * Wabco ABS brzdový systém * Nouzové odjištění pružinových válců * Bubnové brzdy ----Nápravy: * 2 x 7 t nápravy Gigant Dodpol Th Dmjfx Am Seut ----Pérování: * Parabolické pružiny s tandemovým vyrovnávacím agregátem ----Tažná oj / Tažné oko: * Výškově nastavitelná tažná oj (+/- 150 mm) * 40 mm šroubovací tažné oko ----Obecné přídavné díly: * Přední opěrná noha Jost * Boční ochrana proti podjetí * Sklopný zadní A-štít ----Elektroinstalace / Osvětlení: * 15-pólová zásuvka * Vícekomorová zadní světla ----Nadstavba: * Pevné ocelové čelní a boční stěny * Odnímatelná ocelová zadní stěna * Podlaha z jehličnatého dřeva, tl. 50 mm * 1 kluzná plechová vložka 750 x 1 000 mm v přední části včetně dvou zasouvacích držáků korby vpředu (2 polohy) * Zadní příčník pro uložení hliníkových najížděcích ramp včetně dvou přídavných opěr vzadu ----Nakládací hrana: * Výška nezatížené nakládací hrany cca 710 mm ----Zajištění nákladu: * 4 přestavitelné zásuvné dorazy v 2 polohách pro boční centrování korby * Bočně vždy 1x (13,5 t) UVV uchycení pro zavěšení napínacích prvků * 2 ráčnové napínače (seřizování vřetenem) s kompenzačním řetězem a rychlozkracovačem (napínací síla 6 300 kg) ----Pneumatiky: * Pneumatiky: 285/70R19.5 ----Rozvor: * Rozvor: 1 140 mm ----Lakování: * Podvozek, čelní stěna, boční stěny, blatníky, tažná oj a zadní opěry žárově zinkované * Nápravy, pružiny, opěrná noha a vzdušníky lakované v černé barvě ----Obecné informace: * Vozidlo má denní registraci 06/2024, kvůli chybějícímu systému monitorování tlaku v pneumatikách nebylo zatěžováno ani používáno * Změny, chyby a mezitímní prodej vyhrazeny ----Dostupnost: * K dispozici ihned z Egestorfu u dálnice A7

Stav: použitý, prvá registrácia: 11/2006, Rok výroby: 2006, MÜLLER - MITTELTAL T4 Kompakt Otočný čap - Nízkozdvižný príves so vzduchovým odpružením a kolískami na kolesá - 4 x vzduchom odpružené GIGANT - nápravy - vzduchové odpruženie - 4 x kolískové lôžka na kolesá - mechanické nájazdové rampy - 2 zadné podpery, sklopné - výsuvné výstražné tabule - ABS - Pneumatiky MICHELIN: 235/75 R 17.5 - Ťažké prevedenie: 40.000 kg celková hmotnosť - Pohotovostná hmotnosť: 8.400 kg - Celková dĺžka: 11.750 mm - Ťažné oko: 50 mm Obzvlášť vhodný na prepravu fréz na vápno! Dodpfxjwmpbde Am Seut - Nemecký príves - STK/ kontrola bezpečnosti na želanie a za príplatok možná! Možné chyby a medzi-predaj vyhradený!

Stav: použitý, pohotovostná hmotnosť: 5 100 kg, maximálna hmotnosť nákladu: 12 900 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 12/1998, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 1 mm, celková dĺžka: 2 550 mm, celková šírka: 1 600 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75R17.5, rázvor náprav: 5 400 mm, farba: oranžová, najazdené kilometre: 1 001 km, typ prevodu: iný, kabína vodiča: iný, Výbava: ABS, Vehicle location: Bovenden, 2 axles, SAF axles, turntable, leaf suspension, ABS (anti-lock braking system), lashing rings, container locks, underrun protection, pneumatically adjustable drawbar, side aluminium side guard, twin tyres, storage box, removable side panels. Wheelbase: 5400 mm. Body: Trailer for hooklift containers in lengths from 6m to 6.75m. SAF axles type SKRZ 11030, pneumatic low-tension hook device, 2x pockets for insertable locking hooks, 4x pockets for insertable container centring and skip stops. The trailer can also be used as a flatbed! Aluminium side panels with a height of 600mm are included with the trailer. Dodpfx Aei Rpxwjm Sout Loading ramps available at an additional net price of €900. ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to alterations, prior sale, and errors.

Stav: použitý, pohotovostná hmotnosť: 6 250 kg, maximálna hmotnosť nákladu: 23 750 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 11/2008, dĺžka ložného priestoru: 8 300 mm, šírka ložného priestoru: 2 510 mm, výška ložného priestoru: 930 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75R17.5, farba: červená, najazdené kilometre: 1 001 km, typ prevodu: iný, kabína vodiča: iný, Výbava: ABS, Miesto vozidla: Bovenden, 3-nápravový, vlek s točňou, listové odpruženie, ABS (protiblokovací systém), rozšíriteľný na 3 m, kotviace oká, mechanické nájazdové rampy, zadná podpera, bočný hliníkový ochranný kryt, dvojmontáž pneumatik, úložný box Nástavba: 3-nápravový nízkozdvižný príves s mechanickými nájazdovými rampami, 3x 10t Gigant nápravy, bubnové brzdy, rozšíriteľný na 3 m! Dedpsxvzq Hefx Am Seut Dĺžka rámp cca 2900 mm! Údaje o príslušenstve sú bez záruky, zmeny, predaj a chyby vyhradené!

Stav: nový, maximálna hmotnosť nákladu: 8 850 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2024, * KA-TA-R 11.9 "Masterline" ----Brakes: * EBS braking system * Emergency release for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer assembly ----Drawbar / Flange Eye: * Height-adjustable drawbar (up to 300 mm) with 40 mm flange eye Duodpfx Ael Thyxsm Sst ----General attachments: * Jost mechanical landing gear (front) * Rear: 2 mechanical, hot-dip galvanized folding supports * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin electrical connector * LED lighting * TPMS tire pressure monitoring system ----Tipper body: * Mesh hooks to the side and rear in the central locking housings, plus 2 on the front wall * Steel pallet – 3-way tipper body (continuous side walls – without center stanchions – drop sides fitted with drop-side spring-assisted lift) * Rear stanchions bolted * Combined steel rear swing doors, asymmetrically split, 2-leaf, can be swung open and locked at 270°, not foldable – with additional swinging frame for automatic tailgate opening during tipping; locking by galvanized rotating bar lock and central locking * Deactivation function for automatic rear door operation when tipping backwards with open swinging doors * 4 mm steel floor plate * Rear ramp carrier for loading ramps ----Load securing: * Each corner: 1 x 5 t lashing point * Sides: 4 x 3 t lashing rings integrated into outer frame per side ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired & tracked vehicles * Rear lockable storage compartment under the load area, integrated into the chassis ----Paintwork: * Drawbar, front wall, tipper platform, rear stanchions, underrun protection, mechanical drop supports hot-dip galvanized * Side walls and tailgate painted in RAL 9010 pure white * Side walls can be painted in other RAL colors for an extra charge * Axles, springs, flange eye, air reservoir and landing gear painted black ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle without initial registration, includes manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex-works Egestorf (A7 motorway)

Stav: nový, maximálna hmotnosť nákladu: 8 850 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2024, * KA-TA-R 11.9 “Masterline” ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Eye: * Height-adjustable drawbar (approx. 300 mm) with 40 mm flange eye ----General Accessories: * Jost mechanical landing gear, front * Two mechanical hot-dip galvanized drop legs, rear * Plastic toolbox approx. 750 x 350 x 300 mm, right side * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS tire pressure monitoring system ----Tipping Platform: * Mesh hooks on the sides and rear in the central locking bearings, plus 2 on the front wall * Steel pallet three-way tipper body (continuous side walls without center posts, drop-side walls with hinge spring assist) * Bolted rear stanchions * Combination steel double-wing rear doors, asymmetrically split, opening up to 270°, lockable, non-folding, with additional swinging frame for automatic tailgate opening during tipping process. Locking by galvanized rotary rod latch and central locking. * Deactivation for automatic rear door function when reverse tipping with open wing door * 4 mm steel plate floor * Rear mounting rail for drive-on ramps ----Load Securing: * Each corner with 1 x 5 t lashing ring * Each side with 4 x 3 t recessed lashing rings in the outer frame Duodpfx Amel Thymj Sot ----Ramps: * 1 pair aluminum drive-on ramps approx. 3,310 x 400 mm (load capacity 8 t/pair) suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading floor at the rear, integrated in the chassis ----Paintwork: * Drawbar, front wall, tipping platform, rear stanchions, underrun protection, mechanical drop legs hot-dip galvanized * Side panels and tailgate painted in RAL 9010 pure white * Custom RAL color for side panels available at extra cost * Axles, springs, flange eye, air tank, and landing gear painted in a black tone ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle without first registration, with manufacturer warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex-warehouse Egestorf on the A7

Stav: nový, maximálna hmotnosť nákladu: 8 500 kg, celková hmotnosť: 11 990 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Výbava: ABS, * KA-TA-R 11.9 Masterline: * Front wall and floor hot-dip galvanized * Wabco ABS * Emergency release device for spring brake cylinders * Drum brakes, 2 x 7 t. Gigant axles * Parabolic springs with tandem equalizing unit * Height-adjustable (approx. 300 mm), hot-dip galvanized drawbar with 40 mm flanged towing eye * Jost mechanical landing gear at the front * 2 mechanical, hot-dip galvanized folding supports at the rear * 15-pin power connector * Multi-chamber tail lamps * Hot-dip galvanized bolted underrun protection * Tool box made of galvanized sheet steel, mounted right side * Plastic quarter mudguards * Hot-dip galvanized chassis * Steel pallet – three-way tipper body * Continuous white-painted side walls with upper internal tubular reinforcement, drop-down, without central posts, with side wall spring lifter * Drop-down tailgate, optionally swinging, with manual central locking * Hot-dip galvanized, bolted rear stanchions * Each corner fitted with 1 x 5 t lashing ring; each side with 4 x 3 t lashing eyes recessed into outer frame Duodpfoq Hg D Hjx Am Sot * 4 mm fine-grain steel floor plate * Net hooks * Rear mounting rail for drive-on ramps * Removable steel extensions, 500 mm high, three-way swinging * Body reinforced, with load securing certificate according to EN 12642 XL * 1 pair of aluminium drive-on ramps, approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Lockable rear storage compartment, recessed below the loading platform in the chassis * Axles, springs, air tanks, and landing gear painted in black * Tyres 285/70 R 19.5 * Side wall body colour RAL 9010 pure white * New vehicle with manufacturer warranty * Subject to errors and prior sale * Immediately available ex stock Egestorf at the A7