Müller-Mitteltal Pt 40 Sonderpreis, Tieflader Mit Hydr. Rampen kúpiť použité (19 694)

Stav: použitý, maximálna hmotnosť nákladu: 31 000 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 07/2024, dĺžka ložného priestoru: 9 290 mm, šírka ložného priestoru: 2 520 mm, výška ložného priestoru: 950 mm, * PT 40.0 profile: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes Cgsdjl Tnu Aspfx Am Sot * 4 x 11 t Gigant axles * Air suspension with lift/lower function and RtR valve * Manometer pressure display for payload determination (axles separated on 2 air suspension circuits) * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning board packages front and rear * Front axle plastic quarter mudguards with spray protection * Rear axle straight galvanized steel skirts with spray protection * Reflective contour tape on the sides and rear * EBS multi-voltage system with 12 & 24 V electrical system * 15-pin power connector * LED lighting system 12 / 24 V * Removable LED beacon at the rear * 2 LED reversing lights (activated by reverse gear) * Towing eye (50 mm) with height adjustment * Tool box made of galvanized steel, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Front structure in front of the bogie platform, approx. 490 mm long with 45° corners * ROBOT-welded anti-slip coating on the bogie platform's steel plate * Load securing package consisting of: 1 x 13.4 t UVV lashing eyes left & right in front of front wall support, 4 lateral holes each (2 t lashing force) in bogie platform, 1 pair of lashing eyes (13.4 t) suspended at the rear left & right before rear crossmember, 4 pairs UVV lashing rings (10 t) movable and lowerable, loadable in all directions and embedded in outer frame, 3 stake pockets each side with simultaneous 2 t lashing possibility * Hot-dip galvanized mechanical folding extensions for 3 m overall width (not at rear slope) * Plank holder for extensions under chassis, left longitudinal direction * Excavator arm support over rear axle to end crossmember approx. 2,100 mm long and 190 mm deep, 2 pairs each side 6.4 t lashing eyes in excavator arm support * Hardwood flooring on running surfaces of low-loader platform * Hydraulically single-piece loading ramps (approx. 3,000 x 720 mm), mechanically adjustable laterally * Outer planks of loading ramps made of hardwood * Steel construction prepared for 6-position control valve * Unladen loading edge approx. 950 mm +/- 20 mm (chassis) * Bogie, folding extensions, mechanical drop supports, loading ramps hot-dip galvanized * --Axles, air tanks, towing eye assembly painted black-- * Tyres: 235/75 R 17.5 * Vehicle has day registration in 07/2024 due to missing tire pressure monitoring system and has not been loaded/used * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stav: použitý, maximálna hmotnosť nákladu: 31 000 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 07/2024, dĺžka ložného priestoru: 9 290 mm, šírka ložného priestoru: 2 520 mm, výška ložného priestoru: 950 mm, * PT 40.0 Profile: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lifting and lowering system as well as RtR valve * Pressure gauge for load weight determination (axles separated onto 2 air suspension circuits) * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning panel sets front and rear * Front axle with plastic quarter mudguards and splash guards * Rear axle with straight galvanized steel skirts and splash guards * Reflective contour tape on sides and rear * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector * LED lighting system 12 / 24 V * Removable LED rotating beacon at rear * 2 LED reversing lights (activated via reverse gear) * Coupling bar with 50 mm towing eye and height adjustment * Tool box made of galvanized sheet steel, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Extension in front of the turntable platform, approx. 490 mm long with 45° corners * ROBOT-welded anti-slip coating on the turntable platform steel plate * Load securing package consisting of: Left & right in front of the front wall support each 1 x 13.4 t UVV lashing ring, 4 holes on each side of the turntable platform with 2 t lashing capacity each, 1 pair of lashing rings (13.4 t) hanging at the rear left & right in front of the rear support, on each side 4 pairs of UVV lashing rings (10 t) that can be swivelled and lowered, loadable in all directions and integrated into the outer frame, 3 stake pockets on each side with simultaneous 2 t lashing possibility * Hot-dip galvanized mechanical folding supports for 3 m total width (not in the rear slope) * Board holder for extensions under the chassis on the left side in longitudinal direction * Excavator arm support above rear axle to end support, approx. 2,100 mm long and 190 mm deep, on each side 2 pairs of 6.4 t lashing rings in the arm tray * Hardwood flooring on the running surfaces of the low-bed platform * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * Outer planks of the loading ramps made from hardwood * Steel construction prepared for 6-way control valves * Loading edge unloaded approx. 950 mm +/+ 20 mm chassis * Turntable, folding supports, mechanical drop supports, loading ramps hot-dip galvanized Cjdpol Tlhrofx Am Segt * --Axles, air tanks, drawbar painted in black-- * Tyres: 235/75 R 17.5 * Vehicle has a one-day registration in 07/2024, due to missing tire pressure monitoring system and has not been loaded/used * New vehicle with manufacturer's warranty * Errors and interim sale excepted * Immediately available ex stock Egestorf

Stav: použitý, pohotovostná hmotnosť: 8 800 kg, maximálna hmotnosť nákladu: 31 200 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 04/1996, dĺžka ložného priestoru: 10 000 mm, šírka ložného priestoru: 2 510 mm, výška ložného priestoru: 1 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75R17.5, farba: červená, najazdené kilometre: 1 001 km, typ prevodu: iný, kabína vodiča: iný, Miesto vozidla: Bovenden, 4 nápravy, otočný záves, listové odpruženie, rozšíriteľný na 3 m, upevňovacie oká, dvojdielne najazdové rampy, hydraulické rampy, zadná podpera, bočná hliníková ochrana, dvojmontáž pneumatík, úložný box. Nadstavba: 4-nápravový nízkoložný príves s hydraulickými dvojdielnymi rampami. Nakladacia výška cca 900 mm. 4x 10t náprava SAF, bubnové brzdy, ťažné oko 40 a 50 mm! Dĺžka horného plošiny cca 2900 mm! Dĺžka dolného plošiny cca 7100 mm! ÚDAJE O PRÍSLUŠENSTVE BEZ ZÁRUKY, zmeny, medzi-predaj a omyly vyhradené! Cgodeywvhropfx Am Sot

Stav: nový, maximálna hmotnosť nákladu: 10 800 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm, total length 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal – no truck-side installation required * 15-pin electrical connector Coderwc R Ropfx Am Ssgt * LED lighting system 12 / 24 V * EBS multivoltage system for towing vehicles with 12 and 24 V electrics ----General Attachments: * Support winch at the front * Rear foldable supporting legs, external * Plastic toolbox approx. 858 x 500 x 500 mm at front right, mounted on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Fitted in front of the bulkhead for subsequent installation of container locks * Bolted 400 mm bulkhead made of smooth sheet metal * Rear bolsters, bolted * Drop sides with spring assists ----Load Securing: * Perforated outer frame, approx. 45 degrees angled, with 2 t lashing capacity every 480 mm * Provision for installation of 3 t recessed lashing rings every 600 mm * In the front and rear corners, each with 1 x 6.3 t lashing point * Various holes in bulkhead and rear crossmember for 1.2 t lashing options * Profifix lashing rail centrally along longitudinal axis, lashing capacity up to LC 3000 daN ----Ramps: * One-piece hydraulic mesh loading ramps, approx. 2,750 x 600 mm (can be telescoped down to 20 mm clearance) * Hydraulic flow divider in the trailer (for truck hydraulic pump capacity over 40 l/min up to max. 140 l/min) ----Paintwork: * Chassis, drawbar, bulkhead, mechanical drop supports, and ramps hot-dip galvanized * Axles, springs, air tanks, front support winch, as well as flange towing eye painted in a shade of black * Drop sides painted in RAL 9010 pure white * Side walls can be painted in any RAL color for an additional charge ----Info: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available approx. from CW 16/2026

Stav: nový, maximálna hmotnosť nákladu: 10 800 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles Codpfx Amerwc R Aj Sjgt ----Suspension: * Parabolic springs with equalizer unit ----Drawbar / Flange drawbar eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm ----Electrics / Lighting: * Tyre pressure monitoring system with display option in the truck via EBS signal – no installation required on truck side * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General attachments: * Front support winch * Folding external support legs at the rear * Plastic toolbox approx. 858 x 500 x 500 mm mounted on the front right outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low loader platform: * 50 mm softwood floor * Preparation in front of the bulkhead for subsequent installation of container locks * 400 mm smooth steel bolted front wall * Bolted rear stanchions * Drop sides with spring assist ----Load securing: * Perforated outer frame, approx. 45 degrees angled, with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings at 600 mm intervals * In each front and rear corner: 1 x 6.3 t lashing ring * Various holes in the front and rear cross members for 1.2 t lashing options * Profifix lashing rail centered longitudinally for lashing up to LC 3000 daN ----Ramps: * One-piece hydraulic grid ramps approx. 2,750 x 600 mm (collapsible to 20 mm) * Hydraulic flow divider in trailer (for hydraulic pump output in truck from over 40 ltr. / min. up to max. 140 ltr. / min.) ----Paintwork: * Chassis, drawbar, front wall, mechanical drop supports, and loading ramps hot-dip galvanized * Axles, springs, air tanks, front support winch, and flange drawbar eye painted black * Sideboard paintwork in RAL 9010 pure white * Painting of the side walls in any RAL color available at extra cost ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Example images ----Delivery time: * Available approx. from calendar week 16/2026

Stav: nový, maximálna hmotnosť nákladu: 23 940 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2025, * T3 Profi 30.0: * EBS brake system * RDÜ tyre pressure monitoring system * Emergency release device for spring-actuated cylinders * Drum brakes * 3 x 11 t Gigant axles * Parabolic springs, mechanical axle equalisation at the rear * Side underrun protection * Swivel support legs at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanised steel skirts, each with spray protection * Reflective contour tape on sides and rear * Tool box made of galvanised steel sheet, black powder-coated, approx. 650 x 300 x 600 mm * Hinged lid (hot-dip galvanised) for tool box on turntable platform * Multi-voltage electrical system * LED rear lights * Removable rotating beacon at the rear * Drawbar with 50 mm draw eye and height adjustment via traction spring & turnbuckle * 15-pin electrical connector * 4 stake pockets on each side (stakes not included) with simultaneous lashing option * Load securing package comprising: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 6 pairs of UVV-compliant lashing rings, swivelling and retractable, loadable in all directions and recessed into the outer frame - 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not in the rear taper) * Widening boards stored in the centre of the loading area * One-piece hot-dip galvanised hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-way control block for retrofitting hydraulic side ramp shift * Loading area over turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm drive-on taper) * Chassis, turntable, drawbar, and loading ramps hot-dip galvanised * Axles, springs, air tanks, etc. painted in black tone * 235/75 R 17.5 twin tyres * Unladen weight approx. 5,980 kg * Technical permissible gross weight of 30,000 kg * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from calendar week 11/2026 Cgjdpfx Aol Th I Asm Sst

Stav: nový, maximálna hmotnosť nákladu: 23 940 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 Profi 30.0: * EBS braking system * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t Gigant axles * Parabolic springs, mechanical axle equalization at rear * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel skirts, each with spray protection * Reflective contour tape on sides and rear * Toolbox made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Folding lid (hot-dip galvanized) for toolbox located on the bogie platform * Multi-voltage system * LED tail lights * Removable rotating beacon at the rear * Drawbar with 50 mm towing eye and height adjustment via draw spring & turnbuckle * 15-pin power connector * Four stake pockets per side (stakes not included), each with integrated lash-down points * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on main frame of bogie platform, 6 pairs of UVV-compliant swivel and retractable lashing rings, loadable in all directions and recessed into the outer frame – in corners 13.4 t, otherwise 10 t each * 6 pairs of mechanical fold-out outriggers for total width of 3 m (not in the rear tapered section) * Widening planks stored in the center of the loading area * Hot-dip galvanized, one-piece hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-section control block for retrofitting hydraulic sideways ramp displacement * Loading platform above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm Codpol Th Nnsfx Am Ssgt * Rear loading platform: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach slope) * Chassis, bogie, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * Own weight approx. 5,980 kg * Permissible gross weight of 30,000 kg technically possible * New vehicle with manufacturer’s warranty * Errors and intermediate sale excepted * Available from calendar week 11/2026

Stav: nový, maximálna hmotnosť nákladu: 31 630 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 250 mm, šírka ložného priestoru: 2 520 mm, * T 4: * EBS (Elektronisches Bremssystem) * Emergency release device for spring-loaded cylinders * Drum brakes Cgsdpfjrczm Dox Am Set * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation front and rear * Tire pressure monitoring with indication possible in the truck via EBS signal – without truck-side installation * Warning sign packages front & rear * Contour tape on the sides and rear, reflective * EBS multi-voltage system for 12 & 24 V electrics * Removable LED rotating beacon at rear * 24 V – 15-pin and additional 12 V – 7+4 pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and infinitely variable height adjustment * Tool box made of powder-coated sheet steel and spare wheel holder in basket design, right side * Closed plastic single mudguards at front * Straight steel mudguards at rear, each with spray protection (spray mist suppression) * Lateral underrun protection * Extended offset bend by 500 mm to the front * Bogie platform extension by 520 mm at the front, with 45° corners and 3 recessed storage compartments incl. lids, lockable * Chassis made of high-strength fine-grain steel * Deck over bogie platform with 50 mm softwood, and 60 mm softwood in low-bed platform * Outer planks of loading ramps made of 50 mm bamboo wood * Four stake pockets per side (no stakes included), each with 2 t lashing possibility * Load securing package: 2 lashing eyes (6.4 t) front left/right on main frame of bogie platform, 1 pair of 13.4 t lashing rings front/rear on the side outer frame, and 4 pairs of 10 t lashing rings per side, swiveling, lowerable, loadable in all directions and recessed into outer frame; 2 pairs of 6.4 t rings per side in excavator stick tray; 8 pairs of galvanized folding extensions for 3 m overall width (not at rear slope) * Widening planks stored laterally left in a storage compartment * Excavator stick tray above rear axle up to end of approach slope approx. 2300 x 740 x 190 mm * Mechanical drop supports rear * Hydraulic, hot-dip galvanized loading ramps approx. 3000 x 720 mm * Hydraulic lateral ramp shift on sliding tube from ramp shaft * Loading area over slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded deck height approx. 860 mm (incl. 860 mm approach slope) * Chassis, bogie, loading ramps, and mechanical rear drop supports hot-dip galvanized * Axles, springs, air tanks, and slewing ring painted black * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Available from week 21 / 2026

Stav: nový, maximálna hmotnosť nákladu: 31 630 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 250 mm, šírka ložného priestoru: 2 520 mm, * T 4: * EBS (Elektronisches Bremssystem) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation front and rear * Tire pressure monitoring with display function in the truck via EBS signal – no truck-side installation required * Warning sign packages front & rear * Reflective contour tape on sides and rear * EBS multi-voltage system for 12 & 24 V electrics * Removable rear LED beacon * 24 V – 15-pin as well as additional 12 V – 7+4 pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and infinitely adjustable height * Toolbox made of powder-coated steel sheet and spare wheel holder as basket version, mounted right side * Closed single plastic mudguard at front * Straight rear steel mudguards each with spray protection (anti-spray mist) * Side underrun protection * Extended offset by 500 mm forward * Front extension of the turntable platform by 520 mm with 45° corners, 3 recessed storage compartments incl. covers and lockable * Chassis made of high-tensile fine-grained steel * Floor over turntable platform made of 50 mm and in the low-bed platform made of 60 mm softwood * Outer planks of the loading ramps made of 50 mm bamboo * Each side with 4 stake pockets (no stakes included), each with 2 t lashing point * Cargo securing package consisting of: 2 lashing eyes 6.4 t front left and right on the main frame of the turntable platform, front and rear on each side 1 pair of 13.4 t lashing rings on the outer frame, and each side 4 pairs of 10 t lashing rings, swiveling and lowering, loadable in all directions and recessed into the outer frame, 2 pairs of 6.4 t lashing rings in the excavator arm support, 8 pairs of galvanized fold-out markers for 3 m total width (not in the rear slope) * Widening planks stored left side in a storage compartment * Excavator arm support above the rear axle to the end of the access slope approx. 2,300 x 740 x 190 mm * Mechanical drop-down supports at rear * Hydraulic galvanized loading ramps approx. 3,000 x 720 mm * Hydraulic lateral ramp shift on sliding tube from ramp axle * Load area above slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded platform height approx. 860 mm (incl. 860 mm access slope) * Chassis, turntable, loading ramps, mechanical folding supports at rear hot-dip galvanized * Axles, springs, air tanks and slewing ring painted black Cedpfol Th Evsx Am Sjgt * New vehicle with manufacturer's warranty * Errors and prior sale reserved * Available from week 21 / 2026

Stav: použitý, maximálna hmotnosť nákladu: 30 700 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 11/2002, Výbava: ABS, * MüllerMitteltal 4-nápravový nízkozdvižný príves T40 * 2x riadené otočné nápravy * Nemecký príves * pero * hydraulicky posuvné rampy / vľavo-vpravo Cedpfx Asyuri Esm Ssgt * delené sklopné rampy * možnosť rozšírenia * ABS * BPW nápravy * 40 t * vlastná hmotnosť: 9300 kg * zaťaženie na nápravu = 10 t na nápravu * plne funkčný * pneumatiky v poriadku

Stav: použitý, pohotovostná hmotnosť: 7 340 kg, maximálna hmotnosť nákladu: 22 660 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 05/2012, dĺžka ložného priestoru: 9 200 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75 R 17,5, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235/75 R 17,5, veľkosť zadnej pneumatiky: 235/75 R 17,5, kabína vodiča: iný, emisná trieda: žiadny, Výbava: ABS, pneumatická brzda, Dĺžka ložnej plochy cca 9 200 mm, ložná výška cca 900 mm, 16x kotviacich ôk, vozidlo sa predáva na objednávku, vyhradzujeme si právo na tlačové chyby, omyly a zmeny, ilustračné obrázky. Viac údajov na: !, More Details: ! Cjdpfx Asy Izwyom Sogt

Stav: použitý, pohotovostná hmotnosť: 7 340 kg, maximálna hmotnosť nákladu: 22 660 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 05/2012, dĺžka ložného priestoru: 9 200 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75 R 17,5, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235/75 R 17,5, veľkosť zadnej pneumatiky: 235/75 R 17,5, kabína vodiča: iný, emisná trieda: žiadny, Výbava: ABS, pneumatická brzda, Dĺžka ložnej plochy cca 9 200 mm, ložná výška cca 900 mm, 16x kotviacich ôk, vozidlo sa predáva na objednávku, vyhradzujeme si právo na tlačové chyby, omyly a zmeny, ilustračné obrázky. Viac údajov na: !, More Details: ! Cjdpfxoyy I U Aj Am Sjgt

Stav: použitý, maximálna hmotnosť nákladu: 39 500 kg, celková hmotnosť: 50 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 09/2010, ďalšia kontrola (TÜV): 12/2026, dĺžka ložného priestoru: 9 345 mm, Rok výroby: 2010, * Müller Mitteltal T50 Kompakt * Nízkozdvižný přívěs * Nájezdové rampy Codpfx Ameyzlyxs Segt * Pneumatiky: viz fotografie * 5 náprav * Gigant nápravy * Povolená celková hmotnost: 50 000 kg * Pohotovostní hmotnost: 10 500 kg * Užitečné zatížení: 39 500 kg * Vzduchové odpružení * Okamžitě k dispozici * Změny a omyly vyhrazeny Nabízíme: Nákup bez DPH pro firmy z EU s DIČ/VAT číslem a zákazníky ze třetích zemí. Leasing a financování. Kompletní vyřízení veškerých celních formalit. Zajištění krátkodobých a vývozních registračních značek. Přepravu do přístavu. Všechny ceny uvedené v inzerci jsou cenami včetně DPH (brutto) a obsahují zákonnou DPH ve výši 19 %.

Stav: použitý, maximálna hmotnosť nákladu: 17 500 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 09/2005, ďalšia kontrola (TÜV): 01/2027, šírka ložného priestoru: 2 500 mm, ? Hydraulické rampy ? Rozšíriteľné ? 8 upevňovacích ôk na každej strane ? Držiak na rezervné koleso ? Nakladacia výška: cca 930 mm ? Bubnová brzda ? Duomatické pripojenie Csdpfoytz Hwox Am Segt ? Listové pruženie ? Dvojmontáž pneumatík Všetky údaje sú bez záruky / Medzipredaj vyhradený.

Stav: nový, maximálna hmotnosť nákladu: 23 500 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 380 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * PT 30 Profile: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lifting and lowering device including return-to-ride (RtR) valve * Smart-Board installed on trailer as info tool (for axle load display – front and rear separate) * Tyre pressure monitoring system with in-cab display via EBS signal, no installation required on the truck * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign panels front and rear * VA plastic quarter mudguards with spray protection * Rear straight galvanized steel skirts with spray protection * High-visibility reflective contour tape laterally and at the rear * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * Drawbar 1,200 mm long with 40 mm towing eye and height adjustment via traction spring & turnbuckle * Toolbox made of galvanized steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted right side * Equipment box within turntable with folding lid, 2 container locks permanently fitted (directly after turntable platform) * ROBOT-welded anti-slip surface on steel plate of the turntable platform (raised weld seams) * Load securing package (La-Si-Paket) includes: 2 lashing eyes (13.4 t) front left & right on front wall support, 1 pair each front & rear UVV lashing rings (13.4 t), 3 pairs per side of swiveling and retractable UVV lashing rings (10 t), loadable in any direction, integrated into external frame, plus 3 stake pockets per side with simultaneous 2 t lashing point * 6 pairs of mechanical folding outriggers for 3 m overall width (excluding rear slope) * Extension planks stored in centre of load area * Hydraulic one-piece access ramps approx. 3,000 x 720 mm * Mechanically adjustable laterally * 4-way hydraulic valve block for later retrofitting of hydraulic ramp shifting * Excavator arm rest spanning rear axle up to end crossmember (total length approx. 2,100 mm) * 2 pairs of lashing eyes LC 6400 daN in the excavator arm rest, positioned sideways in main frame * 2 galvanized steps at turntable, left and right * Profifix lashing rail centered lengthwise in flat area for lashing up to LC 3000 daN * Chassis, turntable, folding outriggers, drop leg supports and access ramps hot-dip galvanized * Axles, turntable ring, air tanks, and drawbar painted in black finish Cgodstplwijpfx Am Sot * Loading edge when loaded approx. 910 mm +/- 20 mm air suspension * New vehicle with manufacturer’s warranty * Errors and prior sales excepted * Available approx. from calendar week 22/2026 * Sample images

Stav: nový, maximálna hmotnosť nákladu: 23 500 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 380 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * PT 30 Profile: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lift/lower function and RtR-valve * Smart-Board infotool mounted on trailer (for axle load display – front and rear individually) * Tire pressure monitoring with display capability in the truck via EBS signal, without installation required on the truck side * Side underrun protection * Swing-out support legs at the rear of the chassis frame * Mechanically adjustable warning sign sets at front and rear * Front axle: plastic quarter mudguards with spray protection * Rear axle: straight, galvanized steel skirts with spray protection * Reflective contour marking strips on sides and rear * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * Drawbar 1,200 mm long with 40 mm towing eye and height adjustment via draw spring & turnbuckle * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted right side * Storage box in the turntable for accessories, with hinged lid, 2 container locks permanently installed (directly after turntable platform) * ROBOT-welded anti-slip surface on the steel plate of the turntable platform (projecting weld beads) * Load securing package including: 2 lashing eyes (13.4 t) at front left & right on the bulkhead beam, 1 pair each of UVV lashing rings (13.4 t) at front & rear, and 3 pairs each side of UVV lashing rings (10 t), pivotable and lowerable, loadable in all directions and recessed in the outer frame; 3 stake pockets per side, each with 2 t lashing capability * 6 pairs of mechanical folding outriggers for 3-meter overall width (not in rear bevel) Cgjdpfxoxptn Rs Am Sot * Width boards stored centrally on the loading platform * Hydraulic one-piece loading ramps, approx. 3,000 x 720 mm * Mechanically adjustable sideways * 4-way valve block for future retrofitting of hydraulic ramp adjustment * Continuous excavator arm rest above rear axle up to end beam (total length approx. 2,100 mm) * 2 pairs lashing eyes LC 6,400 daN in excavator arm rest, mounted laterally in the longitudinal frame * 2 galvanized steps at the turntable, left and right * Profifix lashing rail in the center axis, in flat area for lashing up to LC 3,000 daN * Chassis, turntable, folding outriggers, drop legs and loading ramps hot-dip galvanized * Axles, slewing ring, air tank, and drawbar painted in black * Loading edge height approx. 910 mm +/- 20 mm with air suspension * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Available approx. from CW 22/2026 * Sample photos

Stav: použitý, pohotovostná hmotnosť: 6 500 kg, maximálna hmotnosť nákladu: 23 500 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 01/2008, ďalšia kontrola (TÜV): 03/2024, dĺžka ložného priestoru: 8 000 mm, šírka ložného priestoru: 2 520 mm, výška ložného priestoru: 910 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75R17.5, farba: oranžová, najazdené kilometre: 1 001 km, typ prevodu: iný, kabína vodiča: iný, Výbava: ABS, Miesto vozidla: Bovenden, listové pruženie, 3 nápravy, nápravy BPW, otočný čap, ABS (antiblokovací systém), upevňovacie oká, hydraulické rampy, zadné podpery, bočná hliníková ochrana proti podbehnutiu, dvojitá montáž pneumatík, odkladacia schránka Nadstavba: Hydraulické rampy, možné rozšíriť na 3 m. BPW nápravy, bubnové brzdy, upevňovacie krúžky na vonkajších stranách. Cgjdsqpgtmjpfx Am Set Dĺžka ramien cca 4000 mm! ÚDAJE O PRÍSLUŠENSTVE SÚ BEZ ZÁRUKY, zmeny, predaj počas inzercie a chyby vyhradené!

Stav: použitý, celková hmotnosť: 47 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 11/2004, ďalšia kontrola (TÜV): 08/2026, * Müller Mitteltal TS3 nízkozdvižný náves * Prvá evidencia: 11/2004 * 3 nápravy * Vzduchové odpruženie * Gigant nápravy * Hydraulické dlhé rampy, posuvné a sklopné * Rozšírenia ložnej šírky z 2,50 m na 3,0 m Cjdpfx Ajw Tgkbjm Segt * Dĺžka ložnej plochy: 8,50 m pri ložnej výške 0,85 m * Dĺžka ložnej plochy na krku: 3,40 m pri ložnej výške 1,50 m * Podpery * Pohotovostná hmotnosť: 10 260 kg * Technicky prípustná celková hmotnosť: 47 000 kg * STK platná do: 08/2026 * Technická kontrola platná do: 02/2026

Stav: nový, maximálna hmotnosť nákladu: 16 000 kg, celková hmotnosť: 21 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 500 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 700 mm, Rok výroby: 2024, * KA-TA-RT 21.0 ML: * Without ABS / EBS, approved for 40 km/h * Spring-loaded parking brake, drum brakes * Gigant axles * Tandem balance unit with 100 mm wide parabolic springs * Support winch at the front * Mechanical drop-down supports at the rear * Fixed welded drawbar with low-maintenance ball joint for K80 ball coupling (adjustable by +77 mm / 33 mm displacement via headplate) with elevated gantry for connection lines * 12 V 7 + 4-pin electrical wiring * 12 / 24 V LED lighting system with protective grid * 2 LED work lights at the rear, switchable from the towing vehicle, no installation required on the towing side * Side marker lights with indicator operation * Plastic quarter mudguards * Plastic toolbox approx. 750 x 350 x 300 mm on the right side * Chassis made of fine-grain steel * Steel platform - 3-way tipper body with M-Strong side panels (fixed front wall, continuous side walls - without central posts - pendulum-mounted via manual central locking and mechanically foldable with side panel spring lifter * Hydraulic tailgate, 500 mm high, as hydraulic chute with a 115° opening angle * 4 mm Hardox 450 steel floor * 1 x 7 t lashing rings in each corner, as well as 4 x 3 t on each side, recessed and foldable * Hot-dip galvanized two-step access in front of the front wall (driver's side left) * 1 pair of aluminum loading ramps (10 t / pair for axle spacing over 2,500 mm), 3,570 x 410 x 120 mm, suitable for rubber-tired and tracked vehicles * 2 receptacle shafts for aluminum loading ramps, recessed into the rear of the chassis, load securing according to EN 12642 XL * --Coupling height loaded approx. 530 mm, unloaded approx. 590 mm-- * Superstructure painted in RAL 9010 pure white * Chassis, drawbar, rear drop-down supports, underride guard hot-dip galvanized Cgjdpfx Amer Dpzue Sjt * Axles, air tank, front support winch * K80 coupling painted in black * New vehicle with manufacturer warranty * Errors and prior sale reserved * Immediately available from Egestorf

Stav: nový, maximálna hmotnosť nákladu: 16 000 kg, celková hmotnosť: 21 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 500 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 700 mm, Rok výroby: 2024, * KA-TA-RT 21.0 ML: * Without ABS/EBS, with 40 km/h approval * Spring-loaded parking brake, drum brakes * Gigant axles * Tandem equalizing unit with 100 mm wide parabolic springs * Support winch at the front * Mechanical drop-down supports at the rear * Fixed welded drawbar with low-maintenance K80 ball head coupling ring (offset by +77 mm / 33 mm via the head plate), with elevated tower for the connection lines * 12 V, 7 + 4-pin power cable * LED lighting system 12/24 V with protective grid * 2 LED work lights at the rear, switchable from the towing vehicle without on-vehicle installation * Side marker lights with indicator control * Plastic quarter mudguards * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right-hand side * Chassis made of high-tensile steel * Steel three-way tipper body with M-Strong sidewalls (fixed front wall, continuous side walls – without center stanchions – pendulum-mounted via manual central locking and mechanically foldable with sideboard spring lift * Hydraulic tailgate 500 mm high, serves as a hydraulic chute with a 115° opening angle * 4 mm Hardox 450 steel floor * One recessed and foldable lashing ring (7 t) in each corner; 4 recessed and foldable side lashing rings (3 t each) Csdpfx Amor Dpz Hs Segt * Hot-dip galvanized two-step access ladder in front of the front wall (on the left) * 1 pair aluminum loading ramps (10 t/pair for axle spacing over 2,500 mm), 3,570 x 410 x 120 mm, suitable for rubber-tired and tracked vehicles * 2 storage compartments for aluminum ramps, integrated from the rear in the chassis; load securing in accordance with EN 12642 XL * --Coupling height loaded approx. 530 mm, unloaded approx. 590 mm-- * Body paintwork in RAL 9010 pure white * Chassis, drawbar, rear supports, underrun protection hot-dip galvanized * Axles, air tanks, front support winch * K80 coupling painted in black * New vehicle with manufacturer's warranty * Errors and interim sale subject to change * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 10 750 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * ETÜ-TA-R 14.4: ----Brzda: * Brzdový systém EBS * Nouzové odjištění pružinových válců * Bubnové brzdy ----Náprava: * 2 x 7 t gigatické nápravy ----Odpružení: Cgjdpfx Amev Eq Eve Sjt * Parabolické pružiny s vyrovnávacím agregátem ----Tažná oj / tažné oko: * Tažná oj s výškovým nastavením do 300 mm * Prodlužovací tažná oj o 250 mm na 2 250 mm * 40mm přírubové tažné oko ----Elektrika / osvětlení: * Monitorování tlaku v pneumatikách (RDÜ) * 15pinová elektrozásuvka * LED osvětlení ----Obecné příslušenství: * Podpěrná klika vpředu * Vnější sklopné podpěry vzadu * Plastový kufr na nářadí cca 858 x 500 x 500 mm vpravo vpředu na čele * Boční ochrana proti nárazu * Plastové čtvrtinové blatníky ----Nákladová plocha nízkoložného přívěsu: * 50 mm podlaha z jehličnatého dřeva * Před čelem a zadní šikminou příprava pro dodatečnou montáž kontejnerových zámků pro přepravu 20" kontejnerů * Přišroubovaná čelní stěna z hladkého plechu * Boční stěny z ocelového plechu - trapezový profil - sklopné a dělené uprostřed (1x dělené) * Ocelová zadní stěna zasunutelná mezi držáky rampy, při nepoužívání uložená uvnitř před čelní stěnou * Zadní sloupky přišroubované ----Zajištění nákladu: * Děrovaný vnější rám ohnutý cca 45° se zajišťovací silou 2 t každých 480 mm * Možnost instalace sklopných zajišťovacích ok s nosností 3 t každých 600 mm * V každém rohu vpředu a vzadu vždy 1 x 6,3 t upínací oka * V čele a koncovém nosníku různá upínací místa pro 1,2 t * Profifix upínací lišta uprostřed po délce s možností upnutí do LC 3000 daN ----Rampy: * Jednodílné mechanické rampy z mřížového roštu s pružinou pro jednoruční obsluhu cca 2750 x 600 mm (skladatelné až na 20 mm) * Náběhová šikmina vzadu cca 860 mm podvozek ----Rozvor: * Rozvor 1 140 mm ----Lakování: * Tažná oj, čelní stěna, zadní čelo, sklápěcí podpěry a nájezdové rampy žárově zinkovány * Nápravy, pružiny, vzduchové zásobníky, přírubové tažné oko a podpěrná klika lakovány v černém odstínu * Lakování bočnic v libovolné barvě RAL (kromě speciálních nebo metalických laků), barvu lze změnit až cca 6 týdnů před dokončením ----Informace: * Zesílená a certifikovaná konstrukce dle EN 12642 XL včetně certifikátu o zajištění nákladu * Nové vozidlo s tovární zárukou * Změny, chyby a mezitímní prodej vyhrazeny ----Dodací lhůta: * dostupné cca od 30. týdne / 2026

Stav: nový, maximálna hmotnosť nákladu: 10 750 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * ETÜ-TA-R 14,4: ----Brzda: * Brzdový systém EBS * Nouzové uvolnění pružinových válců * Bubnové brzdy Cgodpfov D Tcbex Am Set ----Náprava: * 2 x 7 t Gigant nápravy ----Odpružení: * Parabolické pružiny s vyrovnávacím agregátem ----Tažná oj / Flanšová tažná oka: * výškově nastavitelná tažná oj v rozsahu 300 mm * prodloužení tažné oj o 250 mm na 2 250 mm * 40mm flanšová tažná oka ----Elektrika / Osvětlení: * RDÜ systém monitorování tlaku v pneumatikách * 15pólová elektrická zásuvka * LED osvětlení ----Obecné přídavné prvky: * přední podpěrný nástavec * zadní sklopné podpěry vně * plastová schránka na nářadí cca 858 x 500 x 500 mm vpředu vpravo zvenčí na čelní stěně * boční ochrana proti vniknutí vozidel * plastové čtvrt-blatníky ----Ložná plocha: * 50mm jehličnatá podlaha * zařízení před čelní stěnou a zadním sklonem pro dodatečnou montáž kontejnerových zámků pro přepravu 20" kontejnerů * čelní stěna se šroubovaným hladkým plechem * bočnice ze ztrubkovaného ocelového plechu -v polovině dělené, výklopné * ocelová zadní stěna, zasouvatelná mezi držák ramp – při nepoužívání uchycena uvnitř před čelní stěnou * zadní sloupky našroubované ----Zajištění nákladu: * děrovaný vnější rám, ohnutý cca 45 stupňů, s upevňovací silou 2 t každých 480 mm * možnost instalace sklopných kotev s nosností 3 t každých 600 mm * v rozích vpředu a vzadu vždy jedna kotevní oka 6,3 t * různé otvory v čelním a závěrném nosníku pro vázání nákladu s nosností 1,2 t * Profifix kotvící lišta ve středové podélné ose pro zajištění nákladu až do LC 3000 daN ----Rampy: * jednodílné mechanické mřížové nájezdové rampy s pružinovým mechanismem pro obsluhu jednou osobou, cca 2 750 x 600 mm (složitelná na 20 mm) * zadní nájezdový sklon cca 860 mm podvozek ----Rozvor: * rozvor 1 140 mm ----Lakování: * tažná oj, čelní stěna, zadní vrata, sklopné podpěry a nájezdové rampy žárově zinkovány * nápravy, pružiny, vzduchové zásobníky, flanšová tažná oka a podpěrná noha lakovány černou barvou * bočnice lakované v požadovaném odstínu RAL (bez speciálních a metalických laků), lze měnit do cca 6 týdnů před dokončením ----Informace: * zesílená a certifikovaná konstrukce dle EN 12642 XL včetně certifikátu o zajištění nákladu * nový vůz s tovární zárukou * změny a předchozí prodej vyhrazeny ----Dodací lhůta: * k dodání od cca týdne 30 / 2026

Stav: nový, maximálna hmotnosť nákladu: 10 760 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * ETÜ-TA-R 14.4: ----Brake System: * Drum brakes * Electronic braking system (EBS) * Emergency release device for spring brake cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit Cjdpfxjxglibs Am Segt ----Drawbar / Flange Draw Eye: * Height-adjustable drawbar by 300 mm * Drawbar extension by 250 mm (total length 2,250 mm) * 40 mm flange draw eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED lighting ----General Attachments: * Jost landing gear at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox mounted externally on the front right bulkhead * Side underrun protection * Plastic quarter mudguards ----Low-bed Platform: * 50 mm softwood floor * Preparation in front of bulkhead for retrofitting container locks * Bolted smooth steel sheet bulkhead * Side walls made of trapezoidal-profiled steel sheet, foldable with drop-side spring assist * Steel rear wall can be inserted between ramps – storage bracket provided internally in front of the bulkhead when not in use * Rear stakes bolted ----Load Securing: * Perforated outer frame, bent approx. 45 degrees with 2 t lashing capacity every 480 mm * Option for installing 3 t drop lashing rings every 600 mm * Each corner front and rear fitted with 1 x 6.3 t lashing ring * Various bore holes in the front and rear beam for 1.2 t lashing options ----Ramps: * Single-section mechanical grating drive-on ramps with spring system for one-man operation, approx. 2,750 x 600 mm (collapsible to 20 mm) * Rear approach angle approx. 860 mm ----Paintwork: * Hot-dip galvanized chassis, drawbar, bulkhead, ramps, and rear wall * Drop-side color RAL 9010 pure white * Side walls can be painted in any RAL color at extra cost ----Information: * Reinforced and certified superstructure in accordance with EN 12642 XL, including load securing certificate * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from calendar week 08/2026

Stav: nový, maximálna hmotnosť nákladu: 10 760 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * ETÜ-TA-R 14.4: ----Brake System: * Drum brakes * Electronic braking system (EBS) * Emergency release device for spring brake cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Draw Eye: * Height-adjustable drawbar by 300 mm * Drawbar extension by 250 mm (total length 2,250 mm) * 40 mm flange draw eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED lighting ----General Attachments: * Jost landing gear at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox mounted externally on the front right bulkhead * Side underrun protection * Plastic quarter mudguards ----Low-bed Platform: * 50 mm softwood floor * Preparation in front of bulkhead for retrofitting container locks * Bolted smooth steel sheet bulkhead * Side walls made of trapezoidal-profiled steel sheet, foldable with drop-side spring assist * Steel rear wall can be inserted between ramps – storage bracket provided internally in front of the bulkhead when not in use * Rear stakes bolted ----Load Securing: * Perforated outer frame, bent approx. 45 degrees with 2 t lashing capacity every 480 mm * Option for installing 3 t drop lashing rings every 600 mm * Each corner front and rear fitted with 1 x 6.3 t lashing ring * Various bore holes in the front and rear beam for 1.2 t lashing options ----Ramps: * Single-section mechanical grating drive-on ramps with spring system for one-man operation, approx. 2,750 x 600 mm (collapsible to 20 mm) * Rear approach angle approx. 860 mm ----Paintwork: * Hot-dip galvanized chassis, drawbar, bulkhead, ramps, and rear wall Cedpfoxglh Rjx Am Segt * Drop-side color RAL 9010 pure white * Side walls can be painted in any RAL color at extra cost ----Information: * Reinforced and certified superstructure in accordance with EN 12642 XL, including load securing certificate * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from calendar week 08/2026

Stav: nový, maximálna hmotnosť nákladu: 16 750 kg, celková hmotnosť: 21 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * ETÜ-TA-R 21.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake chambers * Drum brakes * 2 x 11 t Gigant axles * Air suspension with lifting and lowering system * Fittings at the front bulkhead and rear slope for subsequent installation of container locks for transporting 20" containers * Drawbar with 50 mm flange towing eye and height-adjustable drawbar * Jost landing gear at the front * External foldable supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * LED lights * 21 t GVWR version with reinforced chassis and strengthened axles * Reinforcement package for drilling rig transport on the chassis * 50 mm softwood floor, clamp-mounted * Fittings at the front bulkhead for subsequent installation of container locks * Bolted smooth sheet metal front wall * Split side walls made of steel sheet, trapezoidal profile, foldable with central drop-in stake * Steel rear wall, can be inserted between the ramps—storage bracket for disuse located inside at the front wall * Bolted rear stanchions * Perforated outer frame, approx. 45 degrees bent, with 2 t lashing capacity every 480 mm Cgodpfx Aeq Dyu Ujm Sst * Option for installation of 3 t folding lashing rings every 600 mm * Profifix lashing rail centrally along the longitudinal axis, up to LC 3000 daN * 1 x 10 t lashing ring in each front and rear corner * Cargo securing package: 2 x 8 t recessed lashing rings per side in the outer frame; various bores for 1.2 t lashing points in the front and end carrier * One-piece mechanical grating loading ramps with spring mechanism for single-operator use, approx. 3,000 x 620 mm (can be collapsed to 20 mm width) * Rear approach slope approximately 860 mm on the chassis * Drawbar, front wall, tailgate, foldable supports, and loading ramps hot-dip galvanized * Axles, springs, air tanks, and landing gear lacquered in black * Loading height (unladen) approx. 940 mm * Loading height (laden) approx. 910 mm * Wheelbase: 1,810 mm * Tires: 235/75R17.5 * Drop-side paintwork in your choice of RAL color (except special or metallic finishes), changeable up to approx. 6 weeks before completion * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from week 29 / 2026