Müller-Mitteltal 11,9 To-2 Achs Tand. Kipper / Rampen / Aufsatzb. kúpiť použité (56 993)

Stav: použitý, maximálna hmotnosť nákladu: 14 300 kg, celková hmotnosť: 20 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 07/2023, ďalšia kontrola (TÜV): 11/2026, Rok výroby: 2023, * HL - TA 20.0 ----Brakes: * Wabco EBS-E braking system * Emergency release device for spring-loaded cylinders * Drum brakes * Duomatic brake connection ----Axle: * 2 x SAF axles (9 t each) * 1st axle as lift axle (fully automatic) * Lift axle with +30 mm ride height via lift cylinder * Traction aid for maneuvering and forced lowering on the first axle – controlled by speed-dependent EBS electronics (no installation required on the truck side, additional cable for operation from within the tractor) Iiodpfxjyfy Rrj Aglea ----Air Suspension: * Air suspension with lowering function via remote control ----Drawbar / Flange Towing Eye: * 50 mm flange bolt-type towing eye, height-adjustable by +77 mm and -33 mm, for 2 t vertical load ----Electrics / Lighting: * 15-pin power connector * 3-pin 12V auxiliary connector * LED lighting system 12 / 24V * 2 LED reversing lights, switched via reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * Extended connection cables for agricultural and forestry vehicles * Power supply for remote control 12+24 V via tail light ----General Equipment: * BPW landing leg, front * Mechanically extendable underrun protection for container lengths over 6,000 mm * Speedline diamond-finish aluminum rims * Pin-type towing coupling (use only when underrun protection is retracted) * Enclosed plastic half-shell single mudguards * Two-step access ladder in front of the bulkhead on the left * Shovel and broom holders in front of the bulkhead * 2 stainless steel toolboxes (matte finish), approx. 650 x 350 x 320 mm, located at the right side * Enclosed side underrun protection, usable as advertising space ----Hydraulics: * 2-circuit hydraulic connections (engine side from truck/tractor) rated for 180 bar (tractor operation) * Double-acting control circuit for hydraulic tailgate (mounted front right) operable via remote control ----Hooklift: * Palfinger PHT 20 SCASNSLD5 telescopic hooklift (serial no. 100746129, year 2023) * Base frame made of high-strength, fine-grain steel * 20,000 kg traction force * Hook height 1,570 mm * Hooklift operated via remote control * Remote control features fast-lowering function (unloading only, not while loading) * Emergency stop switches on both left and right sides * Container mountings with 4 supports per side and 1 roller each at the rear * Hydraulic rear internal locking * 2 additional hydraulic cylinders to support main arm lifting * 2 x mechanical drop support legs at rear * Rated for 20 t gross weight (2 x 9 t axles) and 2 t vertical load * Note: If the remote control is outside its charging cradle, the service brake must be applied to enable radio control. Brake connections must remain connected at all times to operate the hydraulic/pneumatic valves. * Underrun protection monitoring system ensures underrun guard is retracted during tipping ----Loading Height: * Unladen approx. 1,300 mm with lowered lift axle ----Paintwork: * Chassis, drawbar, steps, underrun protection, and drop support legs hot-dip galvanized * Axles, air tanks, and front landing leg painted black * Palfinger hooklift painted black/yellow ----Notes: * Subject to errors and prior sale * Vehicle is in very good / as-new condition ----Container: Dimensions: * Loading length: 5,500 mm * Loading width: 2,300 mm * Loading height: 1,000 mm Notes: * Fittings for hook systems available

Stav: použitý, maximálna hmotnosť nákladu: 14 300 kg, celková hmotnosť: 20 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 07/2023, ďalšia kontrola (TÜV): 11/2026, Rok výroby: 2023, * HL - TA 20.0 ----Braking System: * Wabco EBS-E brake system * Emergency release device for spring-loaded cylinders * Drum brakes * Duomatic brake connection ----Axles: * 2 x t SAF axles * 1st axle as a lift axle (fully automatic) * Lift axle with +30 mm driving height via adjustment cylinder * Start assist for maneuvering and forced lowering on the first axle – controlled by speed-dependent EBS electronics (no truck-side installation required; includes additional cable for operation from the tractor) ----Air Suspension: * Air suspension with lowering function via remote control ----Drawbar / Flange Drawbar Eye: Iijdpfx Ajx Dp Atoglja * 50 mm flanged screw-on drawbar eye, height-adjustable by +77 mm and -33 mm, for 2 t vertical load ----Electrics / Lighting: * 15-pin power connector * 3-pin 12V auxiliary socket * LED lighting system 12/24V * 2 LED reversing lights, activated via reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * Extended connection cables for agricultural and forestry vehicles * Remote power supply 12+24V via tail light circuit ----General Attachments: * BPW landing gear (front) * Mechanically extendable underrun protection for container lengths over 6,000 mm * Speedline diamond aluminum rims * Detachable pin towing eye (usable only with retracted underrun protection) * Closed plastic half-shell single mudguards * Two-step access ladder in front of front wall, left side * Shovel and broom holder in front of front wall * 2 stainless steel toolboxes (matte), approx. 650 x 350 x 320 mm, right side * Enclosed side impact protection, usable as advertising space ----Hydraulics: * 2-circuit hydraulic connections (engine-side from truck/tractor), rated for 180 bar (for tractor operation) * Double-acting control circuit for hydraulic tailgate (installed front right) with remote control operation ----Hook Lift: * Palfinger PHT 20 SCASNSLD5 telescopic hook lift (serial no. 100746129, year 2023) * Base frame made of high-strength fine grain steel * 20,000 kg pulling force * Hook height: 1,570 mm * Hooklift control via remote control * Remote control with quick function for lowering, but not for lifting * Emergency stop switches on left and right sides * Container platform with 4 lateral supports per side and 1 roller at the rear per side * Hydraulic rear lock * 2 additional hydraulic cylinders to support the main boom lifting * 2 x mechanical drop-down rear supports * Approved for 20 t GVW (2 x 9 t axles) and 2 t vertical load * Note: If the remote control is outside of the charging cradle, the service brake must be applied for remote activation; brake connections must remain permanently connected to open the hydraulically/pneumatically controlled valves * Monitoring system for underrun protection to ensure it is retracted during tipping ----Loading Height: * Unladen approx. 1,300 mm with lowered lift axle ----Paintwork: * Chassis, drawbar, access steps, underrun protection, and drop-down supports hot-dip galvanized * Axles, air tanks, front landing gear painted in black * Palfinger hooklift painted black/yellow ----Information: * Subject to errors and prior sale * Vehicle is in very good / as-new condition ----Delivery Time: * Vehicle is available immediately

Stav: použitý, maximálna hmotnosť nákladu: 14 300 kg, celková hmotnosť: 20 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 07/2023, ďalšia kontrola (TÜV): 11/2026, Rok výroby: 2023, * HL - TA 20.0 ----Brake System: * Wabco EBS-E braking system * Emergency release device for spring-actuated cylinders * Drum brakes * Duomatic brake connection ----Axle: Iijdpfx Agsx Dp Agjloa * 2 x t SAF axles * 1st axle as lift axle (fully automatic) * Lift axle with +30 mm driving height via adjustment cylinder * Start-up aid for manoeuvring and forced lowering on the first axle – controlled by speed-dependent EBS electronics (no truck-side installation required, additionally with cable for operation from the tractor) ----Air Suspension: * Air suspension with lowering function via remote control ----Drawbar / Flange Towing Eye: * 50 mm flange-bolted towing eye – height-adjustable by +77 mm and -33 mm – for 2 t vertical load ----Electrics / Lighting: * 15-pin power plug * 3-pin 12V auxiliary plug * LED lighting system 12/24V * 2 LED reversing lights activated by reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * Extended connector cables for agricultural and forestry vehicles * Wireless power supply 12+24 V via tail lights ----General Fittings: * BPW landing gear at front * Manually extendable underride guard for container lengths over 6,000 mm * Speedline diamond aluminium rims * Pin-lock tow coupling (use only with underride guard pushed in) * Enclosed plastic half-shell individual mudguards * Two-step access before the front bulkhead on the left * Shovel and broom holder in front of the front bulkhead * 2 stainless steel toolboxes – matt – approx. 650 x 350 x 320 mm, fitted right side * Enclosed side guard usable as advertising space ----Hydraulics: * 2-circuit hydraulic connections (engine-side from truck/tractor) designed for 180 bar (tractor operation) * Double-acting control circuit for hydraulic tailgate (mounted right front) operable via remote control ----Hooklift: * Palfinger PHT 20 SCASNSLD5 telescopic hookloader (Serial no. 100746129, year 2023) * Base frame made of high-strength fine-grained steel * 20,000 kg tractive force * Hook height 1,570 mm * Hookloader control via remote control * Remote control with quick function for lowering only, not for picking up * Emergency stop switches on both left and right sides * Container mountings with 4 supports each side and 1 roller at rear * Hydraulic rear internal locking * 2 additional hydraulic cylinders to assist with main arm lifting * 2 x mechanical drop-down rear supports * Certified for 20 t total weight (2 x 9 t axles) and 2 t vertical load * Note: If the remote control is outside the docking station, the service brake must be applied to enable wireless operation. Brake connections must remain permanently connected to allow the hydraulic/pneumatic valves to operate. * Monitoring system for underride guard ensuring it is retracted when tipping ----Loading Height: * Unladen approx. 1,300 mm with lowered lift axle ----Paintwork: * Chassis, drawbar, access steps, underride guard, and mechanical supports galvanised * Axles, air tank, and front landing gear painted in black * Palfinger hooklift painted black/yellow ----Information: * Subject to errors and prior sale * Vehicle is in very good / as-new condition ----Delivery Time: * Vehicle is immediately available

Stav: použitý, maximálna hmotnosť nákladu: 14 300 kg, celková hmotnosť: 20 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 07/2023, ďalšia kontrola (TÜV): 11/2026, Rok výroby: 2023, * HL - TA 20.0 ----Braking System: * Wabco EBS-E brake system * Emergency release device for spring-loaded cylinders * Drum brakes * Duomatic brake coupling ----Axles: * 2 x t SAF axles * 1st axle as lift axle (fully automatic) * Lift axle with ride height +30 mm via positioning cylinder * Traction aid for shunting and forced lowering onto the first axle - controlled via speed-dependent EBS electronics - (no installation required on the truck side, additionally with cable control in the tractor) ----Air Suspension: * Air suspension with lowering function via remote control ----Drawbar / Flange Towing Eye: * 50 mm flange-mounted towing eye - height-adjustable by +77 mm and -33 mm - for 2 t vertical load ----Electrics / Lighting: * 15-pin power plug * 3-pin 12V auxiliary connector * LED lighting system 12 / 24 V * 2 LED reversing lights activated via reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24 V electrics * Extended connection lines for agricultural and forestry vehicles * Power supply to remote control 12+24 V via tail light Isdpfx Asx Dp Amsgleia ----General Attachments: * BPW landing leg at the front * Mechanically extendable underrun protection for container lengths over 6,000 mm * Speedline diamond-finish aluminium rims * Detachable tow pin coupling (usable only when underrun protection is retracted) * Closed plastic single-splashguard fenders * Two-step access in front of the front wall on the left * Shovel and broom holder in front of the front wall * 2 matte stainless steel toolboxes approx. 650 x 350 x 320 mm, right side * Closed side underrun protection usable as advertising space ----Hydraulics: * 2-circuit hydraulic connectors (engine side from truck/tractor) designed for 180 bar (tractor operation) * Double-acting control circuit for hydraulic tailgate (installed front right) operable via remote control ----Hooklift: * Palfinger PHT 20 SCASNSLD5 telescopic hooklift (serial no. 100746129, year 2023) * Base frame made of high-strength fine-grain steel * 20,000 kg tensile force * Hook height 1,570 mm * Hooklift control via remote control * Remote control with rapid function for tipping off, but not for lifting * Emergency stop switches on both the left and right sides * Container supports with 4 rests each side plus 1 roller each at rear * Hydraulic rear internal locking * 2 additional hydraulic cylinders to assist main arm lifting * 2 x mechanical drop-down supports at the rear * Approval for 20 t gross weight (2 x 9 t axles) and 2 t vertical load * Note: If the remote control is outside the charging cradle, the service brake must be activated to enable radio release. Brake couplings must remain permanently connected to operate the hydraulic/pneumatically controlled valves. * Monitoring system for underrun protection—ensures retraction during tipping ----Loading Height: * Unladen approx. 1,300 mm with lowered lift axle ----Paintwork: * Chassis, drawbar, access step, underrun protection, and drop-down supports hot-dip galvanized * Axles, air tanks, and front landing leg painted in a shade of black * Palfinger hooklift painted black/yellow ----Info: * Subject to errors and prior sale * Vehicle is in very good / as-new condition ----Container: Dimensions: * Cargo length: 5,500 mm * Cargo width: 2,300 mm * Cargo height: 1,000 mm Info: * Mounting brackets for hook systems according to...

Stav: nový, maximálna hmotnosť nákladu: 10 760 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * ETÜ-TA-R 14.4: ----Brakes: * Drum brakes * Electronic Braking System (EBS) * Emergency release system for spring-loaded cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensator unit ----Drawbar / Flange Towing Eye: * Drawbar height-adjustable by 300 mm * Drawbar extension by 250 mm (to a total length of 2,250 mm) * 40 mm flange towing eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED lighting ----General Accessories: * Jost landing leg at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox, front right outside on front wall * Side underrun protection * Plastic quarter mudguards ----Lowbed Platform: * 50 mm softwood floor * Preparation in front of front wall for subsequent installation of container locks * Bolted smooth sheet metal headboard * Trapezoidal-profile steel side walls, foldable with drop-side lifting assist * Steel rear wall, can be slid between the ramps (bracket for storage inside in front of the headboard when not in use) * Bolt-on rear stakes ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option for installation of 3 t recessed lashing brackets every 600 mm * One 6.3 t lashing point in each front and rear corner * Multiple drill holes in the head and end cross members for 1.2 t lashing options ----Ramps: Ijdpfjrvvfljx Agljia * One-piece mechanical grating access ramps with spring assembly for one-person operation, approx. 2,750 x 600 mm (can be compressed to 20 mm) * Approach angle at rear approx. 860 mm ----Paintwork: * Hot-dip galvanized chassis, drawbar, headboard, access ramps, and rear wall * Drop-side paint color in RAL 9010 pure white * Side walls can be painted in any RAL color shade at extra cost ----Information: * --Reinforced and certified body according to EN 12642 XL including load securing certificate-- * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: * Available from calendar week 08/2026

Stav: nový, maximálna hmotnosť nákladu: 10 760 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * ETÜ-TA-R 14.4: ----Brakes: * Drum brakes * Electronic Braking System (EBS) * Emergency release device for spring-loaded cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: Iisdpfxsxglibe Aglsa * Parabolic springs with compensating unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to total length 2,250 mm * 40 mm flange towing eye ----Lighting / Electrics: * Tire Pressure Monitoring System (TPMS) * LED lighting ----General Attachments: * Jost landing gear at the front * External hot-dip galvanized folding supports at the rear * Plastic toolbox, front right, outside on front wall * Side underrun protection * Plastic quarter mudguards ----Low-loader Deck: * 50 mm softwood floor * Mounting facility in front of the front wall for retrofitting container locks * Bolted front wall made of smooth sheet metal * Drop-down side walls made of trapezoidal profile steel with sideboard spring assist * Steel rear wall, retractable between ramps (bracket for storage provided inside at the front wall when not in use) * Rear stakes, bolted ----Load Securing: * Perforated outer frame, bent at approx. 45 degrees with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each corner, front and rear * Various bore holes in front and rear crossmembers for 1.2 t lashing options ----Ramps: * Single-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be closed to 20 mm) * Rear approach angle approx. 860 mm ----Paintwork: * Hot-dip galvanized chassis, drawbar, front wall, ramps, and rear wall * Sideboard color: RAL 2011 deep orange * Painting of side walls in any RAL color available at surcharge ----Info: * --Reinforced and certified construction according to EN 12642 XL, including load securing certificate-- * New vehicle with manufacturer's warranty * Errors and interim sale excepted ----Delivery time: * Available from calendar week 08/2026

Stav: nový, maximálna hmotnosť nákladu: 10 760 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * ETÜ-TA-R 14.4: ----Brake System: * Drum brakes * Electronic braking system (EBS) * Emergency release device for spring brake cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Draw Eye: * Height-adjustable drawbar by 300 mm * Drawbar extension by 250 mm (total length 2,250 mm) * 40 mm flange draw eye ----Lighting / Electrics: Iiedpfx Aoq Dyvvjglea * TPMS (Tire Pressure Monitoring System) * LED lighting ----General Attachments: * Jost landing gear at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox mounted externally on the front right bulkhead * Side underrun protection * Plastic quarter mudguards ----Low-bed Platform: * 50 mm softwood floor * Preparation in front of bulkhead for retrofitting container locks * Bolted smooth steel sheet bulkhead * Side walls made of trapezoidal-profiled steel sheet, foldable with drop-side spring assist * Steel rear wall can be inserted between ramps – storage bracket provided internally in front of the bulkhead when not in use * Rear stakes bolted ----Load Securing: * Perforated outer frame, bent approx. 45 degrees with 2 t lashing capacity every 480 mm * Option for installing 3 t drop lashing rings every 600 mm * Each corner front and rear fitted with 1 x 6.3 t lashing ring * Various bore holes in the front and rear beam for 1.2 t lashing options ----Ramps: * Single-section mechanical grating drive-on ramps with spring system for one-man operation, approx. 2,750 x 600 mm (collapsible to 20 mm) * Rear approach angle approx. 860 mm ----Paintwork: * Hot-dip galvanized chassis, drawbar, bulkhead, ramps, and rear wall * Drop-side color RAL 9010 pure white * Side walls can be painted in any RAL color at extra cost ----Information: * Reinforced and certified superstructure in accordance with EN 12642 XL, including load securing certificate * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from calendar week 08/2026

Stav: nový, maximálna hmotnosť nákladu: 10 760 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * ETÜ-TA-R 14.4: ----Braking system: * Drum brakes * Electronic Braking System (EBS) * Emergency release device for spring-loaded cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange eye: * Height-adjustable drawbar by 300 mm * Drawbar extension by 250 mm (to 2,250 mm) * 40 mm flange towing eye ----Lighting / Electrics: * Tire Pressure Monitoring System (TPMS) * LED lighting ----General attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox, front right on the outside of the front wall * Side underrun protection * Plastic quarter mudguards ----Low-loader bed: * 50 mm softwood floor * Preparation in front of the front wall for subsequent installation of container locks * Bolted front wall made of smooth sheet metal * Side walls made of trapezoidal-profiled steel sheet, foldable with drop side lift assistance * Rear steel wall insertable between the ramps – holder for non-use inside in front of the front wall * Screwed-in rear stanchions ----Load securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option for fitting 3 t recessed lashing rings every 600 mm * 1 x 6.3 t lashing ring in each corner at front and rear * Various boreholes in the front and rear crossmembers for 1.2 t lashing options Iijdpfx Agexglh Rolja ----Ramps: * One-piece mechanical grating loading ramps with spring mechanism for single-operator use, approx. 2,750 x 600 mm (can be pushed together to 20 mm) * Rear drive-on bevel approx. 860 mm ----Paintwork: * Hot-dip galvanized chassis, drawbar, front wall, loading ramps, and rear wall * Sideboard color in RAL 2011 deep orange * Painting of side walls in a different RAL color available at extra cost ----Information: * Reinforced and certified body according to EN 12642 XL incl. load securing certificate * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available from calendar week 08/2026

Stav: nový, maximálna hmotnosť nákladu: 10 750 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2025, * ETÜ-TA-R 14,4: ----Brzda: * Brzdový systém EBS * Nouzové odemykací zařízení pro pružinové brzdové válce * Bubnové brzdy ----Náprava: * 2x 7 t nápravy Gigant ----Pérování: * Parabolické pružiny s vyrovnávacím agregátem ----Oje / přípojné oko s přírubou: * Výškově stavitelné oje v rozsahu 300 mm * Prodloužení oje o 250 mm na délku 2 250 mm * Přírubové tažné oko o průměru 40 mm ----Elektroinstalace / osvětlení: * RDÜ – monitorování tlaku v pneumatikách * 15-pólová elektrická zástrčka * LED osvětlení ----Všeobecné přídavné díly: * Přední opěrná klika * Zadní výklopné podpěry vně vozidla * Plastová skříňka na nářadí cca 858 x 500 x 500 mm vpředu vpravo zvenčí na čele vozidla * Boční ochrana proti podjetí * Plastové čtvrtblatníky ----Ložná plocha nízkoložného přívěsu: * 50 mm podlaha z jehličnatého dřeva * Před čelní stěnou a u skloněné zadní stěny příprava pro dodatečnou montáž uzamykacích mechanismů pro přepravu 20" kontejnerů * Přišroubovaná čelní stěna z hladkého plechu * Boční stěny z ocelového vlnitého plechu – sklopné, dělené uprostřed 1x * Zadní stěna z oceli, zasunutelná mezi držáky nájezdových ramp, při nepoužívání uložena uvnitř před čelní stěnou * Zadní sloupky přišroubované ----Zajištění nákladu: * Vnější rám s děrovaným profilem, skloněný cca 45°, tažná síla 2 t každých 480 mm * Možnost montáže sklopných úchytů na zajištění nákladu o nosnosti 3 t každých 600 mm * V každém rohu vpředu a vzadu 1x úchyt 6,3 t * V čelní a koncové příčce různá provedení otvorů pro možnost zajištění nákladu 1,2 t ----RAMPY: * Jednodílné mechanické mřížové nájezdové rampy s pružinovým mechanismem pro obsluhu jednou osobou, cca 2 750 x 600 mm (lze zúžit až na 20 mm) * Skloněná nájezdová část vzadu cca 860 mm podvozku ----Rozvor: * Rozvor kol 1 140 mm ----Lakování: * Tažné oje, čelní stěna, zadní klapka, výklopné podpěry a nájezdové rampy žárově zinkované * Nápravy, pružiny, vzdušníky, tažné oko a opěrná klika opatřeny černým nátěrem * Lakování bočnic v RAL 9010, čistě bílá * Lakování bočních stěn v libovolném odstínu RAL za příplatek možné ----Informace: * Zesílená a certifikovaná konstrukce dle EN 12642 XL včetně certifikátu o zajištění nákladu Iedpfov Eq Evex Agloia * Nové vozidlo s výrobcovou zárukou * Chyby a mezitímní prodej vyhrazeny ----Doba dodání: * Ihned k dispozici v Egestorfu u dálnice A7

Stav: nový, maximálna hmotnosť nákladu: 10 750 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2025, * ETÜ-TA-R 14.4: ----Brzdy: * Brzdový systém EBS * Nouzové uvolňovací zařízení pro pružinové válce * Bubnové brzdy ----Náprava: * 2 x 7 t nápravy Gigant ----Odpružení: * Parabolické pružiny s vyrovnávacím agregátem ----Tažná oj / přírubové tažné oko: * Tažná oj s výškovým nastavením o 300 mm * Prodloužení tažné oje o 250 mm na 2 250 mm * 40mm přírubové tažné oko ----Elektrika / osvětlení: * Systém kontroly tlaku v pneumatikách RDÜ * 15polový elektrický konektor * LED osvětlení ----Obecné přídavné prvky: * Opěrný naviják vpředu * Vnější sklopné podpěry vzadu * Plastová schránka na nářadí cca 858 x 500 x 500 mm vpravo vpředu zvenku na čelní stěně * Boční ochrana proti podjetí * Plastové čtvrtblatníky ----Ložná plocha nízkoložného přívěsu: * 50 mm podlaha z jehličnatého dřeva * Před čelní stěnou a na zadní šikmině příprava pro dodatečnou montáž kontejnerových zámků k přepravě 20" kontejnerů * Sešroubovaná čelní stěna z hladkého plechu * Boční stěny z ocelového plechu – trapézový profil – sklopné, dělené uprostřed, 1x dělení * Ocelová zadní stěna zasunutelná mezi držáky rampy, při nepoužívání uložená uvnitř před čelní stěnou * Šroubované zadní sloupky ----Zajištění nákladu: * Děrovaný vnější rám, ohnutý cca do 45°, se zajišťovací silou 2 t každých 480 mm * Možnost zabudování sklopných zajišťovacích třmenů s nosností 3 t každých 600 mm Iiedpfx Agsv D Tcbjlsa * V rozích vpředu i vzadu vždy 1 x 6,3 t kotvící oka * V čelním a zadním nosníku různé otvory pro zajištění nákladu s nosností 1,2 t ----Rampy: * Jednodílné mechanické nájezdové rampy z roštového plechu s pružinovým mechanismem pro obsluhu jednou osobou cca 2 750 x 600 mm (lze zasunout až na 20 mm) * Nájezdová šikmina vzadu cca 860 mm podvozek ----Rozvor: * Rozvor kol 1 140 mm ----Lakování: * Tažná oj, čelní stěna, zadní čelo, sklopné podpěry a nájezdové rampy žárově zinkované * Nápravy, pružiny, vzduchojemy, přírubové tažné oko a opěrný naviják lakované v černém odstínu * Lakování bočnic v RAL 9010 - čistě bílá * Lakování bočních stěn v jiném odstínu RAL za příplatek ----Informace: * Zesílená a certifikovaná nadstavba dle EN 12642 XL včetně certifikátu o zajištění nákladu * Nové vozidlo s tovární zárukou * S výhradou omylu a meziprodeje ----Doba dodání: * K dispozici ihned ze skladu Egestorf u dálnice A7

Stav: nový, maximálna hmotnosť nákladu: 14 400 kg, celková hmotnosť: 19 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2025, * ETÜ-TA-ER 19.0: * Wabco EBS-E (electronic braking system) * RDÜ tire monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 11 t Gigant axles Iiodpfx Aomi Tmasgloa * Air suspension with lifting and lowering function * Drawbar with 50 mm flange towing eye and height adjustment of 110 mm via offset plate * Jost landing gear at the front * External folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * Multi-chamber tail lights * Reinforcement package for drill rig transport on the chassis * 50 mm softwood floor, clamped installation * Provision on the front wall for retrofitting container lock fittings * Bolted front wall made from smooth sheet metal * Split side walls made of trapezoidal-profiled steel sheet, foldable, with central drop-in stake * Steel rear wall, slide-in type between the ramps - when not in use, stowed inside at the front wall * Rear stakes, bolted * Perforated outer frame, approximately 45° bent, with 2 t lashing capacity every 480 mm * Optional installation of 3 t drop lashing rings every 600 mm possible * Load securing package: in each front and rear corner, 1 x 10 t UVV lashing ring; on each side, 2 x 8 t UVV lashing rings, retractable into the outer frame; various holes for 1.2 t lashing options in the front and rear crossmember * One-piece slide-in ramps, 12 t per pair, dimensions approx. 2,750 x 620 mm * Rear approach angle approx. 860 mm * Chassis, drawbar, front wall, tailgate, folding supports, and access ramps hot-dip galvanized * --- Axles, air tanks, flange towing eye, and landing gear painted in black --- * Loading height unladen approx. 940 mm * Loading height laden approx. 910 mm * Wheelbase: 1,810 mm * Tires: 235/75R17.5 * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 14 400 kg, celková hmotnosť: 19 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2025, * ETÜ-TA-ER 19.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinder * Drum brakes * 2 x 11 t Gigant axles * Air suspension with lift and lowering system * Drawbar with 50 mm flange eye and height adjustment by 110 mm via offset plate * Jost landing gear at the front * External folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm on the right side * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * Multi-chamber rear lights * Reinforcement package for drilling rig transport on the chassis * 50 mm softwood floor, clamped version * Preparation at the front wall for the retrofitting of container locks * Bolted front wall made of flat sheet metal * Split side walls made of trapezoidal-profile steel sheet, foldable, with folding stanchion in the center Iiedpfsmi Tcqjx Agloa * Rear wall made of steel, slidable between the ramps (bracket for non-use located inside at the front wall) * Rear stanchions bolted * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option for installation of 3 t drop-forged lashing rings every 600 mm * Lashing (Lasi) package: 1 x 10 t UVV lashing ring in each front and rear corner, 2 x 8 t UVV retractable lashing rings per side in the outer frame, various holes in the front and end cross member for 1.2 t lashing options * One-piece sliding ramps 12 t / pair, approx. 2,750 x 620 mm * Rear approach slope approx. 860 mm * Chassis, drawbar, front wall, tailgate, folding supports, and drive-on ramps hot-dip galvanized * --- Axles, air tanks, flange eye, and landing gear painted in a black shade --- * Loading height unladen approx. 940 mm * Loading height laden approx. 910 mm * Wheelbase: 1,810 mm * Tires: 235/75R17.5 * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 14 550 kg, celková hmotnosť: 19 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2024, * ETÜ-TA-R 19.0: * Wabco EBS-E (electronic braking system) * TPMS (tire pressure monitoring system) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 11 t Gigant axles * Air suspension * Drawbar with 50 mm flange towing eye and height-adjustable drawbar * Jost support crank at the front * External folding supports at the rear * Tool box made of galvanized steel plate approx. 650 x 350 x 320 mm, right-hand side (black powder-coated) * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * LED tail lights * Reinforcement package on chassis for drill rig transport – load height +20 mm * 50 mm softwood floor, clamped design * Provision at front bulkhead for retrofitting container locks * Bolted bulkhead made of smooth sheet metal * Side panels made of trapezoidal profiled steel, folding with drop-side lifting aids * Steel rear wall slidable between ramps – storage bracket inside at front bulkhead when not in use * Rear stanchions bolted * Perforated outer frame approx. 45° bent, with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings every 600 mm possible * In each front and rear corner 1 x 10 t lashing ring; various holes in front and rear cross-members for 1.2 t lashing options * One-piece mechanical steel grate ramps with spring assist for one-person operation, approx. 2,750 x 620 mm (can be pushed together up to 20 mm) * Rear approach angle approx. 860 mm * Chassis, drawbar, bulkhead, tailgate, rear folding supports and ramps hot-dip galvanized * Axles, springs, air tanks and support crank painted in black * Wheelbase: 1,310 mm * Tires: 235/75R17.5 Ijdpfx Agopk D Nceljia * Side panels painted in RAL 9010 pure white * Painting of side panels in a RAL color of your choice available at extra cost * New vehicle with manufacturer's warranty * Subject to error and prior sale * Available immediately ex stock Egestorf

Stav: nový, maximálna hmotnosť nákladu: 14 550 kg, celková hmotnosť: 19 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2024, * ETÜ-TA-R 19.0: * Wabco EBS-E (electronic braking system) * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 11 t Gigant axles * Air suspension, drawbar with 50 mm flanged towing eye and height-adjustable drawbar * Front Jost landing gear * Rear external folding supports * Toolbox made of galvanized steel sheet, approx. 650 x 350 x 320 mm, mounted on the right side (black powder-coated) * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * LED tail lights * Reinforcement package for drilling rig transport on the chassis - loading height + 20 mm * 50 mm softwood floor, clamped version * Front wall pre-fitted for subsequent installation of container locks * Bolted front wall made of flat steel sheet * Side walls made of trapezoidal-profile steel sheet, foldable with drop-side spring assist * Steel rear wall, can be inserted between the ramps – storage bracket in front of the front wall when not in use * Rear stanchions bolted * Perforated external frame, approx. 45 degrees angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * In each corner front and rear: 1 x 10 t lashing ring; in the front and rear cross-member: several holes for 1.2 t lashing options * One-piece mechanical grating ramps with spring assist for single-person operation, approx. 2,750 x 620 mm (collapsible down to 20 mm) * Rear approach slope approx. 860 mm * Chassis, drawbar, front wall, tailboard, rear folding supports, and ramps hot-dip galvanized * Axles, springs, air reservoirs, and landing gear painted in a black tone * Wheelbase: 1,310 mm * Tires: 235/75R17.5 Iiedpfx Ajpk D D Hsgloa * Drop sides painted in RAL 9010 pure white * Side walls paintable in any RAL color for an additional charge * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Available immediately ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 12 200 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, Rok výroby: 2026, * TM-TA 14.4: ----Braking System: * Wabco EBS electronic braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with equalizer unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable, hot-dip galvanized drawbar, +/- 150 mm * 40 mm flange drawbar eye ----Electrics / Lighting: * 15-pin electrical connector * LED tail lights * RDÜ tyre pressure monitoring system ----General Attachments: * Jost landing gear at the front * 2 x external folding supports at the rear * Enclosed single plastic mudguards * Folding A-sign at the rear * Plastic underrun protection buffer * Hot-dip galvanized impact protection with integrated chain storage box (W = 370 mm x D = 420 mm x H = 480 mm) front left & right ----Load Securing: * 2 x 5.3 t UVV lashing rings on each side for attaching tensioning elements * Includes 2 permanently mounted ratchet tensioners with chain box on the outer frame * Equalizing chain with eye and quick shortener, both sides, special Y version, 6.3 t ----Skip Stops: Ijdpfx Aopk Dyxogljia * 2 removable skip stops for lateral centering of skips * Front skip stops with pendulum-type stop, can be fixed in 4 positions ----Paintwork: * Hot-dip galvanized chassis * Axles, springs, air tanks, and landing gear painted in black tone ----Information: * Lashing force with load securing certificate * Subject to prior sale and errors * New vehicle with manufacturer's warranty ----Delivery Time: * Immediately available from Egestorf

Stav: nový, maximálna hmotnosť nákladu: 12 200 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, Rok výroby: 2026, * TM-TA 14.4: ----Braking System: * Wabco EBS brake system * Emergency release device for spring-type brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable +/- 150 mm hot-dip galvanized drawbar * 40 mm flange drawbar eye ----Electrics / Lighting: * 15-pin power connector * LED tail lights * RDÜ tire monitoring system ----General Attachments: * Jost landing gear at the front * 2 x external drop-down stabilisers at the rear * Closed individual plastic mudguards * Foldable rear A-plate * Plastic underrun protection buffers * Hot-dip galvanized front impact guard with integrated chain storage box (W = 370 mm x D = 420 mm x H = 480 mm) front left & right ----Load Securing: * 2 x 5.3 t UVV lashing rings per side for attaching tensioning elements ----Skip Stops: * 2 removable skip stops for lateral centering of skips * Front skip stops with pendulum stop, insertable in 4 positions ----Paintwork: * Hot-dip galvanized chassis * Axles, springs, air tanks, and landing gear painted in black ----Notes: * Subject to errors and prior sale Isdsl Thyqepfx Aglsia * New vehicle with manufacturer's warranty ----Delivery Time: * Immediately available from Egestorf

Stav: nový, maximálna hmotnosť nákladu: 10 660 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 600 mm, Rok výroby: 2026, * KA-TA-R 14.4: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with display capability in the truck via EBS signal -no truck-side installation required- * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem compensation unit * Height-adjustable drawbar by approx. 300 mm with 40 mm flanged towing eye * Jost mechanical landing gear at front * 2 mechanical folding supports at rear * Plastic toolbox approx. 750 x 350 x 300 mm on the right side of the chassis, front * 15-pin power connector * LED tail lights 12/24 V * Bolted underrun protection * Plastic quarter mudguards * Net hooks at the central locking brackets as well as 2 at the front wall Iisdpfx Agox Hm Rijlsa * Chassis made from fine-grain steel * Steel pallet 3-way tipper body with reinforced Strong sideboards (continuous side panels on top with internal pipe reinforcement -without center stakes- foldable with sideboard spring lifter) * Rear stakes bolted * Combination steel wing doors at the rear, 2-leaf, asymmetrically split, swiveling and lockable up to 270°, not foldable, with additional pendulum frame for automatic tailgate opening during tipping process, rear lock via galvanized rotary bolt and central locking, deactivation function for automatic tailgate operation when tipping backwards with open wing door * In each corner 1 x 5 t lashing point, and 4 x 3 t lashing rings embedded in the outer frame on each side * 4 mm floor plate made of fine-grain steel * Rear mounting rail for loading ramps * Body – reinforced – with load securing certificate * 1 pair of aluminum loading ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment below the loading area rear, integrated in the chassis for the ramps * Drawbar, underrun protection, rear stake, folding supports at rear hot-dip galvanized * Axles, springs, air tanks, and landing gear painted black * Tires 358/55 R 19.5 * Sideboard coating in RAL 9010 pure white * Side wall paint in an RAL shade available at extra charge * Subject to errors and prior sale * Immediately available from calendar week 10/2026 * Sample photos

Stav: nový, maximálna hmotnosť nákladu: 10 660 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 600 mm, Rok výroby: 2026, * KA-TA-R 14.4: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with display option in the truck via EBS signal—no truck-side installation required * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalizer unit * Drawbar height-adjustable by approx. 300 mm with 40 mm flange towing eye * Jost mechanical landing gear at the front * 2 mechanical folding support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted front right on chassis * 15-pin power connector * LED tail lights 12/24 V * Bolt-on underrun protection * Plastic quarter mudguards * Tie-down hooks at each central locking housing and 2 on the front bulkhead * Chassis made of fine-grained steel * Steel three-way tipper body with reinforced Strong side walls (continuous upper side panels with internal tube reinforcement—without central stanchions—side walls foldable with sidewall spring lifter) * Rear stanchions bolted * Combination steel double-wing rear doors, asymmetrically split—270° swing and lockable—not foldable—and with additional swing frame for automatic tailgate opening during tipping, rear locking via galvanized rotary lock and central locking, deactivation function for automatic tailgate when tipping backwards with open wing doors * 1 x 5 t lashing point in each corner and 4 x 3 t lashing rings recessed into the outer frame on each side * 4 mm fine-grained steel floor plate * Rear ramp rails mounting track * Reinforced body with load securing certificate * 1 pair aluminum ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment recessed under the loading area at the rear, integrated into chassis for ramps * Drawbar, underrun guard, rear stanchion, and rear folding supports hot-dip galvanized * Axles, springs, air reservoir, and landing gear painted black * Tires: 358/55 R 19.5 Iodpox Hm Rcofx Agljia * Side boards painted RAL 9010 pure white * Painting of side panels in RAL color of choice available for a surcharge * Errors and prior sale excepted * Immediately available ex stock from CW 10/2026 * Sample images

Stav: nový, maximálna hmotnosť nákladu: 10 500 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * ETÜ - TA -R 14,4 ----Brzdy: * EBS brzdový systém * Nouzové uvolňovací zařízení pro pružinové brzdové válce * Bubnové brzdy ----Náprava: * 2 x 7 t Gigant nápravy ----Odpružení: * Parabolické pružiny s vyrovnávací jednotkou ----Tažná tyč / Flanšová oko: * Výškově stavitelná tažná tyč v rozsahu 300 mm - prodloužení tažné tyče o 250 mm na 2.250 mm * 40mm flanšová oj ----Elektrika / Osvětlení: * Systém monitorování tlaku v pneumatikách s možností zobrazení v nákladním vozidle přes EBS signál (bez instalace na straně nákladního vozidla) * 15-pólová elektrická zásuvka * LED koncová světla 12 / 24 V Isdpfxsx Ipaps Agljia * Odnímatelné zadní LED výstražné majáky ----Obecné přídavné vybavení: * Opěrná klika vpředu * Vnější žárově zinkované sklopné podpěry vzadu * Plastová skříňka na nářadí cca 858 x 500 x 500 mm přední pravá vnější část čela * Boční ochrana proti najetí * Plastové čtvrtkryty kol ----Nízkoložná plošina: * Příprava před čelem pro dodatečnou montáž kontejnerových uzávěrů * Šroubované čelo z hladkého plechu * Sklopné bočnice z ocelového vlnitého plechu s plynovými vzpěrami * Zadní ocelová stěna zasouvatelná mezi rampy - držák pro nevyužité uvnitř před čelem * Šroubované zadní sloupky * Nájezdová šikmina vzadu cca 860 mm ----Podlaha: * 50 mm podlaha z jehličnatého dřeva * 12 mm silný a 270 mm široký gumový pruh na vnitřní straně nájezdových ramp * V nájezdové šikmině a vnější části nízkoložné plošiny (od čela po zadní příčku) vždy 12 mm silné a 210 mm široké gumové pásy ----Zajištění nákladu: * Děrovaný vnější rám ohnutý cca 45° se zajišťovací silou 2 t každých 480 mm * Možnost vestavby sklopných kotevních ok pro 3 t každých 600 mm * V rozích vpředu a vzadu vždy 1 x 6,3 t upínací oko * V čelní a zadní příčce různé otvory pro uchycení 1,2 t ----Rampy: * Jednodílné mechanické mřížové nájezdové rampy s pružinovým mechanismem pro obsluhu jednou osobou, cca 2.750 x 870 mm (sjednotitelné až na 20 mm) ----Lakování: * Podvozek, tažná tyč, čelo, zadní stěna i nájezdové rampy žárově zinkované * Nápravy, pružiny, vzduchové zásobníky a oj lakovány černým odstínem * Bočnice v barvě RAL 9010 čistě bílá ----Informace: * -- zesílená a certifikovaná konstrukce dle EN 12642 XL vč. certifikátu o zajištění nákladu -- * Změny a předběžný prodej vyhrazeny * Nové vozidlo se zárukou výrobce ----Dodací termín: Vozidlo je ihned k dispozici

Stav: nový, maximálna hmotnosť nákladu: 10 500 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * ETÜ - TA -R 14.4 ----Brzda: * EBS brzdový systém * Nouzový odjišťovací mechanismus pro pružinové brzdové válce * Bubnové brzdy Iedpfxjx Ipbaj Agloia ----Náprava: * 2 x 7 t nápravy Gigant ----Odpružení: * Parabolické listové pružiny s vyrovnávacím agregátem ----Tažná oj / Tažné oko s přírubou: * Výškově stavitelná tažná oj v rozsahu 300 mm - prodloužení tažné oje o 250 mm na celkovou délku 2 250 mm- * Tažné oko s přírubou ø 40 mm ----Elektroinstalace / Osvětlení: * Systém kontroly tlaku v pneumatikách s možností zobrazení na nákladním vozidle prostřednictvím EBS signálu (bez instalace na straně nákladního vozidla) * 15kolíková elektrická zásuvka * LED koncová světla 12 / 24 V * Odnímatelný LED maják vzadu ----Obecná výbava: * Opěrná klika vpředu * Vnější žárově zinkované výklopné podpěry vzadu * Plastová skříňka na nářadí cca 858 x 500 x 500 mm vpředu vpravo vně na čelní stěně * Boční ochrana proti podjetí * Plastové čtvrt blatníky ----Nákladová plocha: * Před čelní stěnou příprava pro dodatečnou montáž kontejnerových zámků * Šroubovaná čelní stěna z hladkého plechu * Boční stěny z profilovaného ocelového plechu - trapézový profil - sklopné s plynovými vzpěrami * Zadní ocelová stěna zasouvatelná mezi nájezdy - držák pro nevyužitou stěnu uvnitř před čelní stěnou * Šroubované zadní sloupky * Zadní nájezdová šikmina cca 860 mm ----Podlaha: * 50 mm podlaha z jehličnatého dřeva * 12 mm silný a 270 mm široký gumový pás na vnitřní straně nájezdových ramp * Ve sklonu nájezdu a na vnějším okraji nákladové platformy (od čelní ke koncové příčce) vždy 12 mm silný a 210 mm široký gumový pás ----Zajištění nákladu: * Děrovaný vnější rám ohnutý cca 45 stupňů, s upínací silou 2 t každých 480 mm * Možnost montáže sklopných úchytů 3 t každých 600 mm * V každém předním a zadním rohu 1 x kotevní oko 6,3 t * V čelní a koncové příčce různé otvory pro možnost zajištění nákladu 1,2 t ----Rampy: * Jednodílné mechanické rošty nájezdové rampy s pružinovým mechanismem pro obsluhu jednou osobou cca 2 750 x 870 mm (složené až na 20 mm) ----Lakování: * Podvozek, tažná oj, čelní stěna, zadní stěna a nájezdové rampy žárově zinkované * Nápravy, listové pružiny, vzduchojemy a tažné oko lakovány v černé barvě * Boční stěny lakovány v RAL 9010 čistě bílá ----Informace: * --zesílená a certifikovaná konstrukce dle EN 12642 XL vč. certifikátu o zajištění nákladu-- * Změny a mezitímní prodej vyhrazeny * Nové vozidlo se zárukou výrobce ----Dodací lhůta: Vozidlo je ihned k dispozici v Egestorfě

Stav: nový, maximálna hmotnosť nákladu: 23 500 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 380 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * PT 30 Profile: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lifting and lowering device including return-to-ride (RtR) valve * Smart-Board installed on trailer as info tool (for axle load display – front and rear separate) * Tyre pressure monitoring system with in-cab display via EBS signal, no installation required on the truck * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign panels front and rear * VA plastic quarter mudguards with spray protection * Rear straight galvanized steel skirts with spray protection * High-visibility reflective contour tape laterally and at the rear * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * Drawbar 1,200 mm long with 40 mm towing eye and height adjustment via traction spring & turnbuckle * Toolbox made of galvanized steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted right side * Equipment box within turntable with folding lid, 2 container locks permanently fitted (directly after turntable platform) * ROBOT-welded anti-slip surface on steel plate of the turntable platform (raised weld seams) * Load securing package (La-Si-Paket) includes: 2 lashing eyes (13.4 t) front left & right on front wall support, 1 pair each front & rear UVV lashing rings (13.4 t), 3 pairs per side of swiveling and retractable UVV lashing rings (10 t), loadable in any direction, integrated into external frame, plus 3 stake pockets per side with simultaneous 2 t lashing point * 6 pairs of mechanical folding outriggers for 3 m overall width (excluding rear slope) * Extension planks stored in centre of load area * Hydraulic one-piece access ramps approx. 3,000 x 720 mm * Mechanically adjustable laterally * 4-way hydraulic valve block for later retrofitting of hydraulic ramp shifting * Excavator arm rest spanning rear axle up to end crossmember (total length approx. 2,100 mm) * 2 pairs of lashing eyes LC 6400 daN in the excavator arm rest, positioned sideways in main frame * 2 galvanized steps at turntable, left and right * Profifix lashing rail centered lengthwise in flat area for lashing up to LC 3000 daN * Chassis, turntable, folding outriggers, drop leg supports and access ramps hot-dip galvanized * Axles, turntable ring, air tanks, and drawbar painted in black finish * Loading edge when loaded approx. 910 mm +/- 20 mm air suspension * New vehicle with manufacturer’s warranty Iedpfx Astplwisglsia * Errors and prior sales excepted * Available approx. from calendar week 22/2026 * Sample images

Stav: nový, maximálna hmotnosť nákladu: 23 500 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 380 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * PT 30 Profile: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lift/lower function and RtR-valve * Smart-Board infotool mounted on trailer (for axle load display – front and rear individually) * Tire pressure monitoring with display capability in the truck via EBS signal, without installation required on the truck side * Side underrun protection * Swing-out support legs at the rear of the chassis frame * Mechanically adjustable warning sign sets at front and rear * Front axle: plastic quarter mudguards with spray protection * Rear axle: straight, galvanized steel skirts with spray protection * Reflective contour marking strips on sides and rear * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * Drawbar 1,200 mm long with 40 mm towing eye and height adjustment via draw spring & turnbuckle * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted right side * Storage box in the turntable for accessories, with hinged lid, 2 container locks permanently installed (directly after turntable platform) * ROBOT-welded anti-slip surface on the steel plate of the turntable platform (projecting weld beads) * Load securing package including: 2 lashing eyes (13.4 t) at front left & right on the bulkhead beam, 1 pair each of UVV lashing rings (13.4 t) at front & rear, and 3 pairs each side of UVV lashing rings (10 t), pivotable and lowerable, loadable in all directions and recessed in the outer frame; 3 stake pockets per side, each with 2 t lashing capability * 6 pairs of mechanical folding outriggers for 3-meter overall width (not in rear bevel) * Width boards stored centrally on the loading platform * Hydraulic one-piece loading ramps, approx. 3,000 x 720 mm * Mechanically adjustable sideways Iodpfx Aoxptn Rogleia * 4-way valve block for future retrofitting of hydraulic ramp adjustment * Continuous excavator arm rest above rear axle up to end beam (total length approx. 2,100 mm) * 2 pairs lashing eyes LC 6,400 daN in excavator arm rest, mounted laterally in the longitudinal frame * 2 galvanized steps at the turntable, left and right * Profifix lashing rail in the center axis, in flat area for lashing up to LC 3,000 daN * Chassis, turntable, folding outriggers, drop legs and loading ramps hot-dip galvanized * Axles, slewing ring, air tank, and drawbar painted in black * Loading edge height approx. 910 mm +/- 20 mm with air suspension * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Available approx. from CW 22/2026 * Sample photos

Stav: nový, maximálna hmotnosť nákladu: 14 550 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, Rok výroby: 2026, * Wabco EBS-E (electronic braking system) * Emergency release mechanism for spring-loaded cylinders * 19.5" disc brakes * Automatic braking when opening the cross-locking units * 2 x 10-ton BPW wide track axles * Air suspension (automatic lowering when disconnecting the brake) * Tire pressure monitoring system with display option in the truck via EBS signal—no truck-side installation required * Pneumatically lowerable towing drawbar, 1,800 mm long with 40 mm towing eye and height adjustment via tension spring & turnbuckle * Plastic toolbox 858 x 500 x 500 mm fitted on the right side * Stowage box for container net made from galvanized perforated sheet, 1,000 x 500 x 500 mm, side-mounted * Enclosed plastic mudguards front & rear axle * Enclosed side impact guard (RAL 9010 pure white) usable as advertising surface * Rear underride protection * Rear plastic bumper guards * Folding A-sign * Hazardous goods sign with document holder and rear reflective parking warning board * 15-pin electrical connector Iedpfx Ajl Tn U Rsgloia * LED lighting system with protective cover * 2 LED reversing lights (activated via reverse gear) * Additional front loading possible with rear track lowering and removable stop * Roller recesses in the area of the turntable with mechanically adjustable stop angles (2 positions) at front left and right on the running tracks * Roller track length approx. 6,830 mm * Pneumatic 4-point clamping lock * For transport of external roll containers as per DIN 30722 Part 1—Dekra cargo securing certificate available * Loaded platform height approx. 1,130 mm * Chassis and locking components hot-dip galvanized * Air tanks, axles, turntable, and drawbar painted in black * --Technically permissible gross weight 20,000 kg-- * New vehicle, unregistered, with manufacturer’s warranty * Subject to errors and prior sale * Available from approx. week 21/2026 * Sample images

Stav: nový, maximálna hmotnosť nákladu: 8 410 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 600 mm, Rok výroby: 2025, * KA - TA - R 11.9 ----Braking system: * Wabco EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: Isdsxf Skpspfx Agljia * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar by approx. 300 mm with 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring with indication option in the truck via EBS signal – without any truck-side installation – * 15-pin electrical connector * LED lighting system 12 / 24 V * 2 LED reversing lamps at the rear – actuated via reverse gear – ----General Attachments: * Mechanical BPW landing gear front * Rear: 2 mechanical folding supports * Plastic toolbox approx. 750 x 350 x 300 mm, front, right side of the chassis * Bolted underrun protection * Plastic quarter mudguards * Two-step access in front of front wall (left side, facing direction of travel) ----Chassis: * Chassis made from high-tensile fine-grained steel ----Tipping Body: * Mesh hooks at the central locking locations and 2 pieces at the front wall * Steel pallet – 3-way tipper body with reinforced 600 mm Strong side panels * Continuous upper side walls with internal tube reinforcement – without intermediate stakes – foldable with tailgate spring lifter * Screw-fastened rear posts * Combination steel swing doors, asymmetrically split, opening 270° and lockable (non-folding) with additional pendulum frame for automatic rear door opening during tipping * Locking via galvanized lever lock at rear and central locking * Deactivation function for automatic rear door function when tipping backwards with open swing door * Rear ramp receptacle rails ----Load Securing: * One 5 t lashing ring in each corner and four 3 t lashing rings recessed into the outer frame at each side * 4 mm steel floor plate made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair aluminum drive-on ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable stowage compartment integrated into the chassis beneath the loading platform at the rear ----Paintwork: * Chassis, drawbar, tipping bed, front wall, underrun protection, rear stanchion, rear folding supports, and access steps hot-dip galvanized * Side walls and tailgate painted RAL 3003 ruby red * Axles, springs, air reservoir, and landing gear painted in black shade ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Subject to prior sale and errors ----Delivery time: * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 8 410 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 600 mm, Rok výroby: 2025, * KA - TA - R 11.9 ----Braking system: * Wabco EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar by approx. 300 mm with 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring with indication option in the truck via EBS signal – without any truck-side installation – * 15-pin electrical connector * LED lighting system 12 / 24 V * 2 LED reversing lamps at the rear – actuated via reverse gear – ----General Attachments: * Mechanical BPW landing gear front * Rear: 2 mechanical folding supports * Plastic toolbox approx. 750 x 350 x 300 mm, front, right side of the chassis * Bolted underrun protection * Plastic quarter mudguards * Two-step access in front of front wall (left side, facing direction of travel) ----Chassis: * Chassis made from high-tensile fine-grained steel ----Tipping Body: * Mesh hooks at the central locking locations and 2 pieces at the front wall * Steel pallet – 3-way tipper body with reinforced 600 mm Strong side panels * Continuous upper side walls with internal tube reinforcement – without intermediate stakes – foldable with tailgate spring lifter * Screw-fastened rear posts * Combination steel swing doors, asymmetrically split, opening 270° and lockable (non-folding) with additional pendulum frame for automatic rear door opening during tipping * Locking via galvanized lever lock at rear and central locking Iisdpfexf Skvsx Aglsa * Deactivation function for automatic rear door function when tipping backwards with open swing door * Rear ramp receptacle rails ----Load Securing: * One 5 t lashing ring in each corner and four 3 t lashing rings recessed into the outer frame at each side * 4 mm steel floor plate made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair aluminum drive-on ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable stowage compartment integrated into the chassis beneath the loading platform at the rear ----Paintwork: * Chassis, drawbar, tipping bed, front wall, underrun protection, rear stanchion, rear folding supports, and access steps hot-dip galvanized * Side walls and tailgate painted RAL 3003 ruby red * Axles, springs, air reservoir, and landing gear painted in black shade ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Subject to prior sale and errors ----Delivery time: * Immediately available ex Egestorf