Nízkozdvižný príves

MÜLLER-MITTELTAL 19 to luftgef. Tandemtiefl. mit Einschubrampen

Stav: nový, maximálna hmotnosť nákladu: 14 400 kg, celková hmotnosť: 19 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2025, * ETÜ-TA-ER 19.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 11 t Gigant axles * Air suspension with lifting and lowering system * Drawbar with 50 mm flange towing eye and height adjustment of 110 mm via offset plate * Jost landing gear at the front * Fold-out external supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * Multi-chamber tail lights * Reinforcement package for drilling rig transport on the chassis * 50 mm softwood floor in clamped design * Fitting at the front wall for subsequent installation of container locks * Bolted smooth plate front wall * Split side walls made of trapezoidal-profiled steel plate, foldable, with folding stake in the center * Steel rear wall, insertable between ramps, holder for storage inside front wall when not in use * Bolted rear stakes * Perforated outer frame, approx. 45° angled, 2 t lashing capacity every 480 mm * Option to install 3 t fold-down lashing rings every 600 mm Pgsdpfxomi Tmao Ad Aow * Load securing package: 1 x 10 t UVV-compliant lashing ring at each corner front and rear, 2 x 8 t UVV-compliant retractable lashing rings per side in the outer frame, various boreholes in front and rear crossmember for 1.2 t lashing options * One-piece sliding ramps approx. 2,750 x 620 mm * Rear approach angle approx. 860 mm * Chassis, drawbar, front wall, tailgate, folding supports, and ramps hot-dip galvanized * ---Axles, air tanks, flange towing eye, and landing gear painted in black--- * Loading height unladen approx. 940 mm * Loading height laden approx. 910 mm * Wheelbase: 1,810 mm * Tires: 235/75R17.5 * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available from Egestorf

Stav: nový, pohotovostná hmotnosť: 6 600 kg, maximálna hmotnosť nákladu: 17 400 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 6 500 mm, celková dĺžka: 10 900 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75 R17,5 (Doppelbereifung), farba: strieborný, typ prevodu: mechanický, spotreba paliva (mestská prevádzka): 1 090 l/100 km, Curb weight: 6600 kg, permissible total weight: 24,000 kg, cargo space length: 6500 mm Tire size: 235/75 R17.5, 1st axle: , 2nd axle: , 3rd axle: , leaf suspension, 3-axle low-loader trailer with recessed area DTS-S 300 - Turntable with heavy-duty ball bearing turntable ring - Foldable rear support - 1 spare wheel holder for 1 spare wheel, with fastening kit - 1 spare wheel, same brand as main tires, steel rim - 1 plastic toolbox - Extensions extendable to 3000 mm (not in rear bevel) - Storage compartment for wooden planks in the center of the low-bed area - Wooden planks 70mm for extension to 3000mm Tie-down eyes for low-loader: - with spring-assisted lifting support Axles & suspension: - SAF - Drum brake axles - Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker balance) Brake system: - 2-line compressed air brake system - Spring-loaded parking brake Electrics: - 24 Volt, multi-chamber lights, side yellow LED lighting - 1 LED rotating beacon with bracket, switched via parking light (removable beacon) - 2 pairs of warning plates, double LED illuminated and extendable to 3000 mm Floor: Pgodpfetcwkrex Ad Asw - Storage box integrated into drive-over slope to recessed area - Then with 70mm softwood floor, in wheel arch area steel/tread plate covering - Rear bevel with 70mm softwood floor Drive-on ramps: steel ramps 2800 mm long, 750 mm wide, laterally adjustable, with wooden covering - 1 pair of ring lashing eyes recessed at the front in the recess, 10 t - 4 pairs of lashing holes at the rear with 5 t each for attaching tension belts - 7 pairs of lashing mushrooms recessed on top and side of the outer frame, 10 t each - 1 x at the front in the recess, 6 x in the low-bed - 5 pairs of stake pockets recessed in the outer frame, internal dimensions 70x40 mm (convertible to 5 t ring lashing eyes for an extra charge) - 2 additional pairs of fold-down lashing points, 10 t each, 1x at the front in the recess, 1x behind the 3rd axle Axles & Suspension: - SAF - Drum brake axles - Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization

Stav: použitý, pohotovostná hmotnosť: 6 500 kg, maximálna hmotnosť nákladu: 23 500 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 01/2008, ďalšia kontrola (TÜV): 03/2024, dĺžka ložného priestoru: 8 000 mm, šírka ložného priestoru: 2 520 mm, výška ložného priestoru: 910 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75R17.5, farba: oranžová, najazdené kilometre: 1 001 km, typ prevodu: iný, kabína vodiča: iný, Výbava: ABS, Miesto vozidla: Bovenden, listové pruženie, 3 nápravy, nápravy BPW, otočný čap, ABS (antiblokovací systém), upevňovacie oká, hydraulické rampy, zadné podpery, bočná hliníková ochrana proti podbehnutiu, dvojitá montáž pneumatík, odkladacia schránka Nadstavba: Hydraulické rampy, možné rozšíriť na 3 m. BPW nápravy, bubnové brzdy, upevňovacie krúžky na vonkajších stranách. Pgedsqpgtmepfx Ad Aow Dĺžka ramien cca 4000 mm! ÚDAJE O PRÍSLUŠENSTVE SÚ BEZ ZÁRUKY, zmeny, predaj počas inzercie a chyby vyhradené!

Stav: nový, číslo stroja/vozidla: 2dff0c136c85096f36822a0bb, pohotovostná hmotnosť: 7 150 kg, maximálna hmotnosť nákladu: 16 850 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, veľkosť pneumatiky: 235 / 75 r 17,5, Further Information Chassis Low-bed Trailer Steel welded construction Turntable with robust ball-bearing slewing ring, storage box recessed in turntable front section Foldable rear support 2 wheel chocks with holder Aluminium side underrun protection Full-width rear mudflap Extendable widenings to 3,000 mm (not included in rear slope) Pjdpfx Aji Riy Ejd Aogw (The track width of the construction machines or vehicles to be transported may not exceed the external frame width of 2,550 mm) Storage compartment for timber planks located centrally on the loading platform 70 mm timber planks for width extension to 3,000 mm Tie-down lashing eyes low loader 3 pairs of lashing points, each rated to 10 t, integrated in the floor at the front 6 pairs of lashing mushrooms, flush-mounted in the outer frame, top and side, each rated to 10 t 1x in the neck area remaining distributed in-between, distance not greater than 1,200 mm 1x rear slope 5 pairs of stake pockets, flush-mounted in outer frame, internal dimensions 70 x 40 mm (convertible to 5 t. ring lashing eyes, not included) Trailer coupling equipment Turntable Drawbar with certified 40 mm towing eye Axles & Suspension SAF drum brake axles Axles/chassis laser-measured to reduce tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation (rocker equalization) Brake System 2-line compressed air brake system Colour-coded lines for easy service Spring-loaded parking brake included 2 non-interchangeable coupling heads at the front with connection lines to tractor unit ABS and ALB, with ABS plug at the front, with connection cable Attention: The trailer may only be towed by towing vehicles that ensure ABS functionality! Wheels and Tyres 235 / 75 R 17.5 Manufacturer’s choice Steel twin wheels, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at front 2 white/red lane marker lamps at rear 2 x 7-pin non-interchangeable plugs at front with connecting cable 1 LED rotating beacon with holder, switched by parking light (removable beacon) 2 pairs of warning boards, double LED illuminated and extendable to 3,000 mm Flooring Front section with steel floor then 70 mm softwood floor, wheel arch area with steel/chequer plate covering Rear slope with 70 mm softwood floor Low-bed loading area incl. rear slope: 8,200 mm Access Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable boarded with timber included with spring lift assistance Operating Instructions An exemption is required for 10,000 kg axle load, only indivisible loads permitted! The stated gross weight is technically feasible; depending on the cargo, the permissible gross weight may not be achievable due to axle/saddle/kingpin load restrictions. (Poor towing or trailing characteristics due to incorrect load distribution may result) Registration/Country Plates Country of registration: Germany With TÜV (Dekra) inspection and appraisal (according to §13 EC-FGV) 24/7 Service Hotline Prepared for two-row number plate holder Conspicuity marking with reflective tape according to ECE R 048, white on sides and red at rear Paintwork Frame DB 7350 Novagrau 10 years warranty against corrosion-through Drawbar galvanized or black, manufacturer’s choice Access ramps hot-dip galvanized Attention: Archive images!

Stav: nový, maximálna hmotnosť nákladu: 30 740 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift/lower system and RtR valve * SmartBoard for payload determination * Warning sign packages at the front & rear * Contour marking tape, reflective, on sides and rear * Removable rear beacon light * LED lighting * Straight drawbar with 50 mm towing eye and stepless height adjustment * Tool box made of powder-coated steel sheet and spare wheel holder in basket design on the right side * Front closed plastic single mudguards * Rear straight steel mud flaps, each with spray suppression * Side underrun protection * Turntable platform front extension by 520 mm, with 45° corners and 3 recessed lockable storage compartments including lids * Chassis made from high-strength fine-grained steel * Decking over the turntable platform made from 50 mm, and in the low-bed platform from 60 mm softwood * Outer planks of the ramps made of hardwood * 4 stake pockets per side (no stakes included) usable as 2 t lashing points at the same time * Load securing package including: 2 lashing eyes 6.4 t at the front left and right on the main frame of the turntable platform * 2 pairs of 13.4 t lashing rings each at the front and rear sides on the outer frame; 4 pairs per side of 10 t swingable and lowerable lashing rings * Usable in all directions and recessed into the outer frame * 2 pairs of 6.4 t lashing rings on the excavator stick support * 8 pairs of galvanized folding outriggers for 3 m total width (not at the rear bevel) * Widening planks stored in a compartment on the left side * Excavator stick support above the rear axle up to the start of the rear slope, approx. 2,100 x 740 x 190 mm * Mechanical rear support legs * Hydraulic folding ramps with hydraulically adjustable ramp tips approx. 4,650 x 720 mm, incl. hydraulic side ramp shift & load holding valve * Loading area above turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loading height loaded: approx. 890 mm, +/- 20 mm (incl. 860 mm entry slope) * Flow divider installed Podpfx Ajl Tphred Asgw * Chassis, turntable, ramps, folding outriggers, and mechanical support legs hot-dip galvanized * Axles, drawbar, air tanks, and turntable painted in black * Tires 235/75 R 17.5 * New vehicle without first registration, with manufacturer's warranty * Errors and prior sale excepted * Available from CW 07/2026