Príves s pracovnou plošinouMÜLLER-MITTELTAL
14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
Príves s pracovnou plošinou
MÜLLER-MITTELTAL
14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
pevná cena bez DPH
29 900 €
(35 581 € brutto)
Rok výroby
2025
Stav
Nový
Umiestnenie
Egestorf 

Zobraziť obrázky
Zobraziť mapu
Základné údaje
Cena a lokalita
pevná cena bez DPH
29 900 €
(35 581 € brutto)
- Umiestnenie:
- Eichenstich 12, 21272 Egestorf, DE
Volať
Technické detaily
- Celková hmotnosť:
- 14 400 kg
- Maximálna hmotnosť nákladu:
- 10 750 kg
- Konfigurácia náprav:
- 2 nápravy
- Dĺžka ložného priestoru:
- 7 000 mm
- Šírka ložného priestoru:
- 2 470 mm
- Výška ložného priestoru:
- 400 mm
Podrobnosti ponuky
- ID záznamu:
- A186-26-321
- Referenčné č.:
- 61801
- Naposledy aktualizované:
- dňa 25.06.2025
Popis
* ETÜ-TA-R 14.4:
* RDÜ Tire Pressure Monitoring System
* EBS brake system
* Emergency release device for spring-loaded cylinders
* Drum brakes
Hnsdpfx Aajv Eq Evjbju
* 2 x 7 tonne Gigant axles
* Parabolic springs with compensating unit
* Drawbar height adjustable by approx. 300 mm – drawbar extension by 250 mm to 2,250 mm
* 15-pin power connector
* LED lighting
* Support winch, front
* External folding supports, rear
* Plastic toolbox approx. 858 x 500 x 500 mm, front right outside on the front wall
* Side underride protection
* Plastic quarter mudguards
* 50 mm softwood floor
* Preparation in front of the front panel and rear slope for optional retrofitting of container locks for the transport of 20" containers
* Bolted front wall made of smooth steel plate
* Trapezoidal profile steel side walls, foldable, split 1x in the middle
* Steel tailgate can be inserted between ramp brackets; can be stored inside in front of the front wall when not in use
* Bolted rear stanchions
* Perforated outer frame, approx. 45 degrees bent, with 2 t lashing capacity every 480 mm, possible installation of 3 t fall lashing brackets every 600 mm; in each front and rear corner 1 x 6.3 t lashing ring; various holes in the front and rear cross members for 1.2 t lashing options
* One-piece mechanical grid ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compressed to 20 mm)
* Rear drive-on slope approx. 860 mm chassis
* Drawbar, front wall, tailgate, folding supports, and ramps hot-dip galvanized
* --- Axles, springs, air tanks, towing eye flange, and support winch painted in black ---
* Reinforced and certified superstructure according to EN 12642 XL, including load securing certificate
* Wheelbase 1,140 mm
* Side panels painted in RAL 9010 pure white
* Painting of side walls in a RAL color of your choice available at extra cost
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Immediately available from Egestorf
Inzercia bola automaticky preložená a vyskytli sa nejaké chyby prekladu.
* RDÜ Tire Pressure Monitoring System
* EBS brake system
* Emergency release device for spring-loaded cylinders
* Drum brakes
Hnsdpfx Aajv Eq Evjbju
* 2 x 7 tonne Gigant axles
* Parabolic springs with compensating unit
* Drawbar height adjustable by approx. 300 mm – drawbar extension by 250 mm to 2,250 mm
* 15-pin power connector
* LED lighting
* Support winch, front
* External folding supports, rear
* Plastic toolbox approx. 858 x 500 x 500 mm, front right outside on the front wall
* Side underride protection
* Plastic quarter mudguards
* 50 mm softwood floor
* Preparation in front of the front panel and rear slope for optional retrofitting of container locks for the transport of 20" containers
* Bolted front wall made of smooth steel plate
* Trapezoidal profile steel side walls, foldable, split 1x in the middle
* Steel tailgate can be inserted between ramp brackets; can be stored inside in front of the front wall when not in use
* Bolted rear stanchions
* Perforated outer frame, approx. 45 degrees bent, with 2 t lashing capacity every 480 mm, possible installation of 3 t fall lashing brackets every 600 mm; in each front and rear corner 1 x 6.3 t lashing ring; various holes in the front and rear cross members for 1.2 t lashing options
* One-piece mechanical grid ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compressed to 20 mm)
* Rear drive-on slope approx. 860 mm chassis
* Drawbar, front wall, tailgate, folding supports, and ramps hot-dip galvanized
* --- Axles, springs, air tanks, towing eye flange, and support winch painted in black ---
* Reinforced and certified superstructure according to EN 12642 XL, including load securing certificate
* Wheelbase 1,140 mm
* Side panels painted in RAL 9010 pure white
* Painting of side walls in a RAL color of your choice available at extra cost
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Immediately available from Egestorf
Inzercia bola automaticky preložená a vyskytli sa nejaké chyby prekladu.
Poskytovateľ
Poznámka: Zaregistrujte sa zadarmo alebo sa prihláste, aby ste získali všetky informácie.
Registrované od: 2001
Odoslať žiadosť
Telefón & Fax
+49 40 33... inzercie
Tieto inzeráty by vás mohli tiež zaujímať.
Váš inzerát bol úspešne odstránený
Došlo k chybe